protected override void DumpBody(XmlWriter writer, SwfTagCode shapeType)
{
writer.WriteAttributeString("state", State.ToString());
if ((State & SwfStyleState.HasMoveTo) != 0)
{
writer.WriteAttributeString("dx", DeltaX.ToString());
writer.WriteAttributeString("dy", DeltaY.ToString());
}
if ((State & SwfStyleState.HasFillStyle0) != 0)
{
writer.WriteAttributeString("fs0", FillStyle0.ToString());
}
if ((State & SwfStyleState.HasFillStyle1) != 0)
{
writer.WriteAttributeString("fs1", FillStyle1.ToString());
}
if ((State & SwfStyleState.HasLineStyle) != 0)
{
writer.WriteAttributeString("ls", LineStyle.ToString());
}
if ((State & SwfStyleState.HasNewStyles) != 0)
{
Styles.Dump(writer, shapeType);
}
}
public string DataToString(FileFormat fileFormat)
{
// all file types are explicitly designed for MSDOS
// for this the newline is hard coded as "CR LF"
Thread.CurrentThread.CurrentCulture = CultureInfo.InvariantCulture;
StringBuilder sb = new StringBuilder();
switch (fileFormat)
{
case FileFormat.Txt:
// **********************************************************
// Very simple format, no place for comments etc.
// http://resource.npl.co.uk/softgauges/Help.htm
// **********************************************************
sb.Append($"{DeltaX:F3}\r\n");
foreach (double z in zData)
{
sb.Append($"{z:F6}\r\n");
}
break;
case FileFormat.SigmaSurf:
// **********************************************************
// Format used by the freeware SigmaSurf
// http://www.digitalmetrology.com
// **********************************************************
sb.Append("SigmaSurf_Data 1.0\r\n");
sb.Append($"IDENTIFICATION: {SampleIdentification}\r\n");
sb.Append($"DATE: {CreationDate.ToString("dd MMM yyyy - HH:mm")}\r\n");
sb.Append($"SPACING_UM: {DeltaX.ToString("F5")}\r\n");
sb.Append($"NUMBER_OF_POINTS: {zData.Length}\r\n");
sb.Append($"PROFILE_UM:\r\n");
foreach (double z in zData)
{
sb.Append($"{z:F6}\r\n"); // resolution 1 pm
}
break;
case FileFormat.Prf:
// **********************************************************
// not well documented, implementation taken
// from the following NPL site:
// http://resource.npl.co.uk/softgauges/Help.htm
// **********************************************************
sb.Append("1 2\r\n");
sb.Append("SG2004 0.000000e+000 PRF\r\n");
sb.Append(string.Format("CX M {0:e} MM 1.000000e+000 D\r\n", (double)zData.Length));
sb.Append(string.Format("CZ M {0:e} MM 1.000000e-009 L\r\n", (double)zData.Length));
sb.Append("EOR\r\n");
sb.Append("STYLUS_RADIUS 0.000000e+000 MM\r\n");
sb.Append(string.Format("SPACING CX {0:e}\r\n", DeltaX * 1000.0)); // in mm!
sb.Append("MAP 1.000000e+000 CZ CZ 1.000000e+000 1.000000e+000\r\n");
sb.Append("MAP 2.000000e+000 CZ CX 1.000000e+000 0.000000e+000\r\n");
sb.Append($"COMMENT {SampleIdentification}\r\n");
sb.Append("EOR\r\n");
foreach (double z in zData)
{
sb.Append($"{z * 1e6:F0}\r\n"); // resolution 1 pm, as in example
}
sb.Append("EOR\r\n");
sb.Append("EOF\r\n");
break;
case FileFormat.PrDE:
case FileFormat.PrEN:
// **********************************************************
// This format was propably developed by PTB and documented
// on the following web site:
// http://www.ptb.de/en/org/5/51/517/rptb_web/wizard/greeting.php
// Umlaute are part of the definition!
// It seems to originate from MSDOS times.
// update in format definition to avoid Umlaute as described in:
// https://ptb.de/rptb
// **********************************************************
double xLen = DeltaX * (zData.Length - 1);
double xResolution = 1000.0 / DeltaX;
sb.Append($"Profil {FileName}\r\n");
if (fileFormat == FileFormat.PrDE)
{
sb.Append($"X-Maß = {xLen:F8} X-Auflösung {xResolution:F6} Punkte/Zeile : {zData.Length}\r\n");
}
if (fileFormat == FileFormat.PrEN)
{
sb.Append($"X-len = {xLen:F8} X-resolution {xResolution:F6} points/scanline: {zData.Length}\r\n");
}
foreach (double z in zData)
{
sb.Append($"{z:F6}\r\n"); // resolution 1 pm, as in example
}
// from the format definition:
// "The last of all z-values shall be in the last line and not followed by a line feed."
sb.Length--;
sb.Length--;
break;
case FileFormat.Smd:
// **********************************************************
// Standardized format used by the surface texture community
// uses some non printeable characters
// This format was designed for F1 softgauges (only?)
// ISO 5436-2:2012
// **********************************************************
string endOfRecord = $"{(char)3}\r\n";
sb.Append($"ISO 5436-2:2012\0{FileName}\0\r\n");
sb.Append("PRF\0 1 ISO5436\0\r\n");
sb.Append($"CX\0 I\0 {zData.Length} mm\0 1.0e0 D\0 {DeltaX / 1000:e5} \r\n");
sb.Append($"CZ\0 A\0 {zData.Length} um\0 1.0e0 D\0\r\n");
sb.Append(endOfRecord); // end of record 1
sb.Append($"DATE: {CreationDate.ToString("dd-MMMM-yyyy")}\0\r\n");
sb.Append($"TIME: {CreationDate.ToString("HH:mm")}\0\r\n");
sb.Append("CREATED_BY Michael Matus, BEV\0\r\n"); //TODO
sb.Append($"COMMENT /* {UserComment} */\0\r\n");
sb.Append(endOfRecord); // end of record 2
foreach (double z in zData)
{
sb.Append($"{z:F5}\r\n");
}
sb.Append(endOfRecord); // end of record 3
// checksum calculation
ushort chkSum = 0;
string s = sb.ToString();
byte[] buffer = System.Text.Encoding.ASCII.GetBytes(s);
foreach (byte byt in buffer)
{
chkSum += (ushort)byt;
}
sb.Append($"{chkSum.ToString()}\r\n");
sb.Append(endOfRecord); // end of record 4
sb.Append($"{(char)26}"); // end of file
break;
case FileFormat.Bcr:
// **********************************************************
// GPS data files according to
// ISO 25178-7, ISO 25178-71 and EUNA 15178.
// **********************************************************
sb.AppendLine("aBCR - 1.0");
sb.AppendLine($"ManufacID = BEV / SIOS NMM");
sb.AppendLine($"CreateDate = {CreationDate.ToString("ddMMyyyyHHmm")}");
sb.AppendLine($"ModDate = {DateTime.UtcNow.ToString("ddMMyyyyHHmm")}");
sb.AppendLine($"NumPoints = {zData.Length}");
sb.AppendLine("NumProfiles = 1");
sb.AppendLine($"Xscale = {(DeltaX * 1e-6).ToString("G17")}");
sb.AppendLine($"Yscale = 0");
sb.AppendLine($"Zscale = 1.0e-6");
sb.AppendLine("Zresolution = -1"); // clause 5.2.8, do not modify!
sb.AppendLine("Compression = 0"); // clause 5.2.9, do not modify!
sb.AppendLine("DataType = 7");
sb.AppendLine("CheckType = 0"); // clause 5.2.11, do not modify!
sb.AppendLine("*");
foreach (double z in zData)
{
sb.AppendLine($"{z:G17}"); // round-trip format
}
sb.AppendLine("*");
string AppName = System.Reflection.Assembly.GetExecutingAssembly().GetName().Name;
string AppVer = System.Reflection.Assembly.GetExecutingAssembly().GetName().Version.ToString();
sb.AppendLine($"ConvertedBy = {AppName} version {AppVer}");
sb.AppendLine($"SampleIdentification = {SampleIdentification}");
sb.AppendLine($"FileName = {FileName}"); // this is useless
sb.AppendLine($"UserComment = {UserComment}");
sb.AppendLine($"TrimmedStart = {Start} µm");
sb.AppendLine($"TrimmedLength = {Length} µm");
sb.AppendLine($"TipConvolution = {TipConvolutionMessage}");
sb.AppendLine("*");
break;
case FileFormat.Csv:
double x = 0.0;
sb.AppendLine("x in µm,z in µm");
foreach (double z in zData)
{
sb.AppendLine($"{x:G17},{z:G17}");
x += DeltaX;
}
break;
case FileFormat.Unknown:
case FileFormat.X3p:
// will not be implemented!
throw new NotImplementedException();
default:
break;
}
return(sb.ToString());
}
protected override void DumpBody(XmlWriter writer, SwfTagCode shapeType)
{
writer.WriteAttributeString("dx", DeltaX.ToString());
writer.WriteAttributeString("dy", DeltaY.ToString());
}