private int HighestSearch(DataObject ob, IList <int> list, int lower, int higher)
{
if ((higher - lower) <= 5)
{
// Start from the bottom up until we find the highest val
for (var i = higher; i >= lower; --i)
{
int res = ob.CompareTo(GetValue(list[i]));
if (res >= 0)
{
return(i + 1);
}
}
// Didn't find return lowest
return(lower);
}
var mid = (lower + higher) / 2;
int compResult = ob.CompareTo(GetValue(list[mid]));
if (compResult == 0)
{
// We know the bottom is between 'mid' and 'higher'
return(HighestSearch(ob, list, mid, higher));
}
if (compResult < 0)
{
return(HighestSearch(ob, list, lower, mid - 1));
}
return(HighestSearch(ob, list, mid + 1, higher));
}
/// <summary>
/// Searches for a given <see cref="DataObject"/> (<paramref name="ob"/>) in the
/// row list between the two bounds.
/// </summary>
/// <param name="ob"></param>
/// <param name="list"></param>
/// <param name="lower"></param>
/// <param name="higher"></param>
/// <remarks>
/// This returns the place to insert ob into the vector, it should not be used to
/// determine if <paramref name="ob"/> is in the list or not.
/// </remarks>
/// <returns>
/// This will return the highest row of the set of values that are equal to <paramref name="ob"/>.
/// </returns>
private long HighestSearch(DataObject ob, IList <long> list, long lower, long higher)
{
if ((higher - lower) <= 5)
{
// Start from the bottom up until we find the highest val
for (long i = higher; i >= lower; --i)
{
int res = ob.CompareTo(GetCellContents(list[(int)i]));
if (res >= 0)
{
return(i + 1);
}
}
// Didn't find return lowest
return(lower);
}
long mid = (lower + higher) / 2;
int compResult = ob.CompareTo(GetCellContents(list[(int)mid]));
if (compResult == 0)
{
// We know the bottom is between 'mid' and 'higher'
return(HighestSearch(ob, list, mid, higher));
}
if (compResult < 0)
{
return(HighestSearch(ob, list, lower, mid - 1));
}
return(HighestSearch(ob, list, mid + 1, higher));
}
/// <summary>
/// Returns a list of rows that represent the maximum row of the given column
/// from each distinct group in this table.
/// </summary>
/// <param name="colNum"></param>
/// <remarks>
/// This should be used to construct a virtual table of rows from
/// each distinct group.
/// </remarks>
/// <returns></returns>
private IList <long> GetMaxFromEachGroup(int colNum)
{
Table refTab = ReferenceTable;
List <long> extractRows = new List <long>();
int size = groupLinks.Count;
long toTakeInGroup = -1;
DataObject max = null;
bool take = true;
for (int i = 0; i < size; ++i)
{
long r = groupLinks[i];
long actRIndex = r & 0x03FFFFFFF;
DataObject cell = refTab.GetValue(colNum, actRIndex);
if (max == null || cell.CompareTo(max) > 0)
{
max = cell;
toTakeInGroup = actRIndex;
}
if ((r & 0x040000000) != 0)
{
extractRows.Add(toTakeInGroup);
max = null;
}
}
return(extractRows);
}
/// <summary>
/// Unions the current range set with the given range set.
/// </summary>
public void Union(SelectableRangeSet unionTo)
{
List <SelectableRange> inputSet = unionTo.rangeSet;
int inSz = inputSet.Count;
int n = 0;
while (n < inSz)
{
SelectableRange inRange = (SelectableRange)inputSet[n];
int sz = rangeSet.Count;
List <SelectableRange> i = rangeSet.GetRange(0, rangeSet.Count);
int j = 0;
while (j < i.Count)
{
SelectableRange range = i[j];
if (RangeIntersectedBy(inRange, range))
{
i.RemoveAt(j);
inRange = ChangeRangeSizeToEncompass(inRange, range);
}
j++;
}
// Insert into sorted position
RangePosition startPoint = inRange.StartPosition;
DataObject start = inRange.Start;
RangePosition endPoint = inRange.EndPosition;
DataObject end = inRange.End;
if (start == SelectableRange.FirstInSet)
{
rangeSet.Insert(0, inRange);
}
else
{
DataObject startCell = start;
i = rangeSet.GetRange(0, rangeSet.Count);
j = 0;
while (j < i.Count)
{
SelectableRange range = i[j];
DataObject curStart = range.Start;
if (curStart != SelectableRange.FirstInSet)
{
if (curStart.CompareTo(startCell) > 0)
{
i[j] = i[j - 1];
break;
}
}
j++;
}
i.Add(inRange);
}
n++;
}
}
/// <summary>
/// Alters the first range so it encompasses the second range.
/// </summary>
/// <remarks>
/// This assumes that range1 intersects range2.
/// </remarks>
private static SelectableRange ChangeRangeSizeToEncompass(SelectableRange range1, SelectableRange range2)
{
RangePosition startPosition1 = range1.StartPosition;
DataObject start1 = range1.Start;
RangePosition endPosition1 = range1.EndPosition;
DataObject end1 = range1.End;
RangePosition startPosition2 = range2.StartPosition;
DataObject start2 = range2.Start;
RangePosition endPosition2 = range2.EndPosition;
DataObject end2 = range2.End;
if (start1 != SelectableRange.FirstInSet)
{
if (start2 != SelectableRange.FirstInSet)
{
DataObject cell = start1;
int c = cell.CompareTo(start2);
if (c > 0 ||
c == 0 && startPosition1 == RangePosition.AfterLastValue &&
startPosition2 == RangePosition.FirstValue)
{
start1 = start2;
startPosition1 = startPosition2;
}
}
else
{
start1 = start2;
startPosition1 = startPosition2;
}
}
if (end1 != SelectableRange.LastInSet)
{
if (end2 != SelectableRange.LastInSet)
{
DataObject cell = end1;
int c = cell.CompareTo(end2);
if (c < 0 ||
c == 0 && endPosition1 == RangePosition.BeforeFirstValue &&
endPosition2 == RangePosition.LastValue)
{
end1 = end2;
endPosition1 = endPosition2;
}
}
else
{
end1 = end2;
endPosition1 = endPosition2;
}
}
return(new SelectableRange(startPosition1, start1, endPosition1, end1));
}
/// <summary>
/// Returns true if the two SelectableRange ranges intersect.
/// </summary>
private static bool RangeIntersectedBy(SelectableRange range1, SelectableRange range2)
{
RangePosition startFlag1 = range1.StartPosition;
DataObject start1 = range1.Start;
RangePosition endFlag1 = range1.EndPosition;
DataObject end1 = range1.End;
RangePosition startFlag2 = range2.StartPosition;
DataObject start2 = range2.Start;
RangePosition endFlag2 = range2.EndPosition;
DataObject end2 = range2.End;
DataObject startCell1 = start1 == SelectableRange.FirstInSet ? null : start1;
DataObject endCell1 = end1 == SelectableRange.LastInSet ? null : end1;
DataObject startCell2 = start2 == SelectableRange.FirstInSet ? null : start2;
DataObject endCell2 = end2 == SelectableRange.LastInSet ? null : end2;
bool intersect1 = false;
if (startCell1 != null && endCell2 != null)
{
int c = startCell1.CompareTo(endCell2);
if (c < 0 ||
(c == 0 && (startFlag1 == RangePosition.FirstValue ||
endFlag2 == RangePosition.LastValue)))
{
intersect1 = true;
}
}
else
{
intersect1 = true;
}
bool intersect2 = false;
if (startCell2 != null && endCell1 != null)
{
int c = startCell2.CompareTo(endCell1);
if (c < 0 ||
(c == 0 && (startFlag2 == RangePosition.FirstValue ||
endFlag1 == RangePosition.LastValue)))
{
intersect2 = true;
}
}
else
{
intersect2 = true;
}
return(intersect1 && intersect2);
}
public static ITable Distinct(this ITable table, int[] columns)
{
var theTable = table as Table;
if (theTable == null)
{
return(table);
}
List <long> resultList = new List <long>();
IList <long> rowList = theTable.OrdereddRows(columns);
long rowCount = rowList.Count;
long previousRow = -1;
for (int i = 0; i < rowCount; ++i)
{
long rowIndex = rowList[i];
if (previousRow != -1)
{
bool equal = true;
// Compare cell in column in this row with previous row.
for (int n = 0; n < columns.Length && equal; ++n)
{
DataObject c1 = table.GetValue(columns[n], rowIndex);
DataObject c2 = table.GetValue(columns[n], previousRow);
equal = (c1.CompareTo(c2) == 0);
}
if (!equal)
{
resultList.Add(rowIndex);
}
}
else
{
resultList.Add(rowIndex);
}
previousRow = rowIndex;
}
// Return the new table with distinct rows only.
VirtualTable vt = new VirtualTable(theTable);
vt.Set(theTable, resultList);
return(vt);
}
private int InternalCompare(long index, DataObject value)
{
DataObject cell = scheme.GetCellContents(index);
return(cell.CompareTo(value));
}
/// <summary>
/// Creates a grouping matrix for the given columns.
/// </summary>
/// <param name="columns"></param>
/// <remarks>
/// The grouping matrix is arranged so that each row of the refering
/// table that is in the group is given a number that refers to the top
/// group entry in the group list. The group list is a linked integer
/// list that chains through each row item in the list.
/// </remarks>
public void CreateGroupMatrix(ObjectName[] columns)
{
// If we have zero rows, then don't bother creating the matrix.
if (RowCount <= 0 || columns.Length <= 0)
{
return;
}
Table rootTable = ReferenceTable;
long rowCount = rootTable.RowCount;
int[] colLookup = new int[columns.Length];
for (int i = columns.Length - 1; i >= 0; --i)
{
colLookup[i] = rootTable.FindFieldName(columns[i]);
}
IList <long> rowList = rootTable.OrdereddRows(colLookup);
// 'row_list' now contains rows in this table sorted by the columns to
// group by.
// This algorithm will generate two lists. The group_lookup list maps
// from rows in this table to the group number the row belongs in. The
// group number can be used as an index to the 'group_links' list that
// contains consequtive links to each row in the group until -1 is reached
// indicating the end of the group;
groupLookup = new List <long>((int)rowCount);
groupLinks = new List <long>((int)rowCount);
int current_group = 0;
long previous_row = -1;
for (int i = 0; i < rowCount; ++i)
{
long rowIndex = rowList[i];
if (previous_row != -1)
{
bool equal = true;
// Compare cell in column in this row with previous row.
for (int n = 0; n < colLookup.Length && equal; ++n)
{
DataObject c1 = rootTable.GetValue(colLookup[n], rowIndex);
DataObject c2 = rootTable.GetValue(colLookup[n], previous_row);
equal = (c1.CompareTo(c2) == 0);
}
if (!equal)
{
// If end of group, set bit 15
groupLinks.Add(previous_row | 0x040000000);
current_group = groupLinks.Count;
}
else
{
groupLinks.Add(previous_row);
}
}
// groupLookup.Insert(row_index, current_group);
PlaceAt(groupLookup, rowIndex, current_group);
previous_row = rowIndex;
}
// Add the final row.
groupLinks.Add(previous_row | 0x040000000);
// Set up a group resolver for this method.
groupResolver = new TableGroupResolver(this);
}
/// <summary>
/// Searches for a given <see cref="DataObject"/> (<paramref name="ob"/>) in the
/// row list between the two bounds.
/// </summary>
/// <param name="ob"></param>
/// <param name="list"></param>
/// <param name="lower"></param>
/// <param name="higher"></param>
/// <remarks>
/// This returns the place to insert ob into the vector, it should not be used to
/// determine if <paramref name="ob"/> is in the list or not.
/// </remarks>
/// <returns>
/// This will return the highest row of the set of values that are equal to <paramref name="ob"/>.
/// </returns>
private long HighestSearch(DataObject ob, IList<long> list, long lower, long higher)
{
if ((higher - lower) <= 5) {
// Start from the bottom up until we find the highest val
for (long i = higher; i >= lower; --i) {
int res = ob.CompareTo(GetCellContents(list[(int)i]));
if (res >= 0)
return i + 1;
}
// Didn't find return lowest
return lower;
}
long mid = (lower + higher) / 2;
int compResult = ob.CompareTo(GetCellContents(list[(int)mid]));
if (compResult == 0)
// We know the bottom is between 'mid' and 'higher'
return HighestSearch(ob, list, mid, higher);
if (compResult < 0)
return HighestSearch(ob, list, lower, mid - 1);
return HighestSearch(ob, list, mid + 1, higher);
}
private static IndexRange IntersectOn(IndexRange range, SqlExpressionType op, DataObject value, bool nullCheck)
{
var start = range.StartValue;
var startPosition = range.StartOffset;
var end = range.EndValue;
var endPosition = range.EndOffset;
bool inclusive = op == SqlExpressionType.Is ||
op == SqlExpressionType.Equal ||
op == SqlExpressionType.GreaterOrEqualThan ||
op == SqlExpressionType.SmallerOrEqualThan;
if (op == SqlExpressionType.Is ||
op == SqlExpressionType.Equal ||
op == SqlExpressionType.GreaterThan ||
op == SqlExpressionType.GreaterOrEqualThan) {
// With this operator, NULL values must return null.
if (nullCheck && value.IsNull) {
return IndexRange.Null;
}
if (start.Equals(IndexRange.FirstInSet)) {
start = value;
startPosition = inclusive ? RangeFieldOffset.FirstValue : RangeFieldOffset.AfterLastValue;
} else {
int c = value.CompareTo(start);
if ((c == 0 && startPosition == RangeFieldOffset.FirstValue) || c > 0) {
start = value;
startPosition = inclusive ? RangeFieldOffset.FirstValue : RangeFieldOffset.AfterLastValue;
}
}
}
if (op == SqlExpressionType.Is ||
op == SqlExpressionType.Equal ||
op == SqlExpressionType.SmallerThan ||
op == SqlExpressionType.SmallerOrEqualThan) {
// With this operator, NULL values must return null.
if (nullCheck && value.IsNull) {
return IndexRange.Null;
}
// If start is first in set, then we have to change it to after NULL
if (nullCheck && start.Equals(IndexRange.FirstInSet)) {
start = DataObject.Null();
startPosition = RangeFieldOffset.AfterLastValue;
}
if (end.Equals(IndexRange.LastInSet)) {
end = value;
endPosition = inclusive ? RangeFieldOffset.LastValue : RangeFieldOffset.BeforeFirstValue;
} else {
int c = value.CompareTo(end);
if ((c == 0 && endPosition == RangeFieldOffset.LastValue) || c < 0) {
end = value;
endPosition = inclusive ? RangeFieldOffset.LastValue : RangeFieldOffset.BeforeFirstValue;
}
}
}
// If start and end are not null types (if either are, then it means it
// is a placeholder value meaning start or end of set).
if (!start.Equals(IndexRange.FirstInSet) &&
!end.Equals(IndexRange.LastInSet)) {
// If start is higher than end, return null
int c = start.CompareTo(end);
if ((c == 0 && (startPosition == RangeFieldOffset.AfterLastValue ||
endPosition == RangeFieldOffset.BeforeFirstValue)) ||
c > 0) {
return IndexRange.Null;
}
}
// The new intersected range
return new IndexRange(startPosition, start, endPosition, end);
}
private int HighestSearch(DataObject ob, IList<int> list, int lower, int higher)
{
if ((higher - lower) <= 5) {
// Start from the bottom up until we find the highest val
for (var i = higher; i >= lower; --i) {
int res = ob.CompareTo(GetValue(list[i]));
if (res >= 0)
return i + 1;
}
// Didn't find return lowest
return lower;
}
var mid = (lower + higher)/2;
int compResult = ob.CompareTo(GetValue(list[mid]));
if (compResult == 0)
// We know the bottom is between 'mid' and 'higher'
return HighestSearch(ob, list, mid, higher);
if (compResult < 0)
return HighestSearch(ob, list, lower, mid - 1);
return HighestSearch(ob, list, mid + 1, higher);
}
/// <summary>
/// If this node represents the given entity this method should return true.
/// </summary>
/// <param name="entity">The entity to check.</param>
/// <returns>true if this node represents the given entity.</returns>
public override bool RepresentsEntity(object entity)
{
return (DataObject.CompareTo(entity) == 0);
}
/// <summary>
/// Intersects the given SelectableRange object with the given operator and
/// value constraint.
/// </summary>
/// <remarks>
/// <b>Note</b>: This does not work with the <c><></c> operator
/// which must be handled another way.
/// </remarks>
private static SelectableRange IntersectRange(SelectableRange range, Operator op, DataObject val, bool nullCheck)
{
DataObject start = range.Start;
RangePosition startPosition = range.StartPosition;
DataObject end = range.End;
RangePosition endPosition = range.EndPosition;
bool inclusive = op.IsEquivalent(Operator.Is) ||
op.IsEquivalent(Operator.Equal) ||
op.IsEquivalent(Operator.GreaterOrEqual) ||
op.IsEquivalent(Operator.SmallerOrEqual);
if (op.IsEquivalent(Operator.Is) ||
op.IsEquivalent(Operator.Equal) ||
op.IsEquivalent(Operator.Greater) ||
op.IsEquivalent(Operator.GreaterOrEqual))
{
// With this operator, NULL values must return null.
if (nullCheck && val.IsNull)
{
return(null);
}
if (start == SelectableRange.FirstInSet)
{
start = val;
startPosition = inclusive
? RangePosition.FirstValue
: RangePosition.AfterLastValue;
}
else
{
int c = val.CompareTo(start);
if ((c == 0 && startPosition == RangePosition.FirstValue) || c > 0)
{
start = val;
startPosition = inclusive
? RangePosition.FirstValue
: RangePosition.AfterLastValue;
}
}
}
if (op.IsEquivalent(Operator.Is) ||
op.IsEquivalent(Operator.Equal) ||
op.IsEquivalent(Operator.Smaller) ||
op.IsEquivalent(Operator.SmallerOrEqual))
{
// With this operator, NULL values must return null.
if (nullCheck && val.IsNull)
{
return(null);
}
// If start is first in set, then we have to change it to after NULL
if (nullCheck && start == SelectableRange.FirstInSet)
{
start = DataObject.Null;
startPosition = RangePosition.AfterLastValue;
}
if (end == SelectableRange.LastInSet)
{
end = val;
endPosition = inclusive
? RangePosition.LastValue
: RangePosition.BeforeFirstValue;
}
else
{
int c = val.CompareTo(end);
if ((c == 0 && endPosition == RangePosition.LastValue) || c < 0)
{
end = val;
endPosition = inclusive
? RangePosition.LastValue
: RangePosition.BeforeFirstValue;
}
}
}
// If start and end are not null types (if either are, then it means it
// is a placeholder value meaning start or end of set).
if (start != SelectableRange.FirstInSet &&
end != SelectableRange.LastInSet)
{
// If start is higher than end, return null
int c = start.CompareTo(end);
if ((c == 0 && (startPosition == RangePosition.AfterLastValue ||
endPosition == RangePosition.BeforeFirstValue)) ||
c > 0)
{
return(null);
}
}
// The new intersected range
return(new SelectableRange(startPosition, start, endPosition, end));
}
public int CompareValue(long index, DataObject val)
{
DataObject cell = scheme.GetCellContents(rowSet[(int)index]);
return(cell.CompareTo(val));
}
public int CompareValue(long index, DataObject val)
{
DataObject cell = subsetList[index];
return(cell.CompareTo(val));
}
private static IndexRange IntersectOn(IndexRange range, SqlExpressionType op, DataObject value, bool nullCheck)
{
var start = range.StartValue;
var startPosition = range.StartOffset;
var end = range.EndValue;
var endPosition = range.EndOffset;
bool inclusive = op == SqlExpressionType.Is ||
op == SqlExpressionType.Equal ||
op == SqlExpressionType.GreaterOrEqualThan ||
op == SqlExpressionType.SmallerOrEqualThan;
if (op == SqlExpressionType.Is ||
op == SqlExpressionType.Equal ||
op == SqlExpressionType.GreaterThan ||
op == SqlExpressionType.GreaterOrEqualThan)
{
// With this operator, NULL values must return null.
if (nullCheck && value.IsNull)
{
return(IndexRange.Null);
}
if (start.Equals(IndexRange.FirstInSet))
{
start = value;
startPosition = inclusive ? RangeFieldOffset.FirstValue : RangeFieldOffset.AfterLastValue;
}
else
{
int c = value.CompareTo(start);
if ((c == 0 && startPosition == RangeFieldOffset.FirstValue) || c > 0)
{
start = value;
startPosition = inclusive ? RangeFieldOffset.FirstValue : RangeFieldOffset.AfterLastValue;
}
}
}
if (op == SqlExpressionType.Is ||
op == SqlExpressionType.Equal ||
op == SqlExpressionType.SmallerThan ||
op == SqlExpressionType.SmallerOrEqualThan)
{
// With this operator, NULL values must return null.
if (nullCheck && value.IsNull)
{
return(IndexRange.Null);
}
// If start is first in set, then we have to change it to after NULL
if (nullCheck && start.Equals(IndexRange.FirstInSet))
{
start = DataObject.Null();
startPosition = RangeFieldOffset.AfterLastValue;
}
if (end.Equals(IndexRange.LastInSet))
{
end = value;
endPosition = inclusive ? RangeFieldOffset.LastValue : RangeFieldOffset.BeforeFirstValue;
}
else
{
int c = value.CompareTo(end);
if ((c == 0 && endPosition == RangeFieldOffset.LastValue) || c < 0)
{
end = value;
endPosition = inclusive ? RangeFieldOffset.LastValue : RangeFieldOffset.BeforeFirstValue;
}
}
}
// If start and end are not null types (if either are, then it means it
// is a placeholder value meaning start or end of set).
if (!start.Equals(IndexRange.FirstInSet) &&
!end.Equals(IndexRange.LastInSet))
{
// If start is higher than end, return null
int c = start.CompareTo(end);
if ((c == 0 && (startPosition == RangeFieldOffset.AfterLastValue ||
endPosition == RangeFieldOffset.BeforeFirstValue)) ||
c > 0)
{
return(IndexRange.Null);
}
}
// The new intersected range
return(new IndexRange(startPosition, start, endPosition, end));
}
/// <summary>
/// Intersects the given SelectableRange object with the given operator and
/// value constraint.
/// </summary>
/// <remarks>
/// <b>Note</b>: This does not work with the <c><></c> operator
/// which must be handled another way.
/// </remarks>
private static SelectableRange IntersectRange(SelectableRange range, Operator op, DataObject val, bool nullCheck)
{
DataObject start = range.Start;
RangePosition startPosition = range.StartPosition;
DataObject end = range.End;
RangePosition endPosition = range.EndPosition;
bool inclusive = op.IsEquivalent(Operator.Is) ||
op.IsEquivalent(Operator.Equal) ||
op.IsEquivalent(Operator.GreaterOrEqual) ||
op.IsEquivalent(Operator.SmallerOrEqual);
if (op.IsEquivalent(Operator.Is) ||
op.IsEquivalent(Operator.Equal) ||
op.IsEquivalent(Operator.Greater) ||
op.IsEquivalent(Operator.GreaterOrEqual)) {
// With this operator, NULL values must return null.
if (nullCheck && val.IsNull) {
return null;
}
if (start == SelectableRange.FirstInSet) {
start = val;
startPosition = inclusive
? RangePosition.FirstValue
: RangePosition.AfterLastValue;
} else {
int c = val.CompareTo(start);
if ((c == 0 && startPosition == RangePosition.FirstValue) || c > 0) {
start = val;
startPosition = inclusive
? RangePosition.FirstValue
: RangePosition.AfterLastValue;
}
}
}
if (op.IsEquivalent(Operator.Is) ||
op.IsEquivalent(Operator.Equal) ||
op.IsEquivalent(Operator.Smaller) ||
op.IsEquivalent(Operator.SmallerOrEqual)) {
// With this operator, NULL values must return null.
if (nullCheck && val.IsNull) {
return null;
}
// If start is first in set, then we have to change it to after NULL
if (nullCheck && start == SelectableRange.FirstInSet) {
start = DataObject.Null;
startPosition = RangePosition.AfterLastValue;
}
if (end == SelectableRange.LastInSet) {
end = val;
endPosition = inclusive
? RangePosition.LastValue
: RangePosition.BeforeFirstValue;
} else {
int c = val.CompareTo(end);
if ((c == 0 && endPosition == RangePosition.LastValue) || c < 0) {
end = val;
endPosition = inclusive
? RangePosition.LastValue
: RangePosition.BeforeFirstValue;
}
}
}
// If start and end are not null types (if either are, then it means it
// is a placeholder value meaning start or end of set).
if (start != SelectableRange.FirstInSet &&
end != SelectableRange.LastInSet) {
// If start is higher than end, return null
int c = start.CompareTo(end);
if ((c == 0 && (startPosition == RangePosition.AfterLastValue ||
endPosition == RangePosition.BeforeFirstValue)) ||
c > 0) {
return null;
}
}
// The new intersected range
return new SelectableRange(startPosition, start, endPosition, end);
}
