public void CanCreateAndPlaceNewCustomNode()
{
const string name = "Custom Node Creation Test";
const string description = "Description";
const string category = "Custom Node Category";
CurrentDynamoModel.ExecuteCommand(
new DynamoModel.CreateCustomNodeCommand(
Guid.NewGuid(),
name,
category,
description,
true));
Assert.IsInstanceOf <CustomNodeWorkspaceModel>(CurrentDynamoModel.CurrentWorkspace);
var customNodeWs = CurrentDynamoModel.CurrentWorkspace as CustomNodeWorkspaceModel;
var customNodeDef = customNodeWs.CustomNodeDefinition;
Assert.AreEqual(name, customNodeDef.DisplayName);
Assert.AreEqual(description, customNodeWs.Description);
Assert.AreEqual(category, customNodeWs.Category);
var home = CurrentDynamoModel.Workspaces.OfType <HomeWorkspaceModel>().FirstOrDefault();
Assert.NotNull(home);
SelectTabByGuid(home.Guid);
CurrentDynamoModel.ExecuteCommand(
new DynamoModel.CreateNodeCommand(
CurrentDynamoModel.CustomNodeManager.CreateCustomNodeInstance(customNodeDef.FunctionId),
0,
0,
true,
true));
Assert.AreEqual(1, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
Assert.IsInstanceOf <Function>(CurrentDynamoModel.CurrentWorkspace.Nodes.First());
Assert.AreEqual(
customNodeDef.FunctionId,
((Function)CurrentDynamoModel.CurrentWorkspace.Nodes.First()).Definition.FunctionId);
}
public void GetNodeFromCommand_DuplicatedGuidsTest()
{
//Arrange
//This guid belongs to a CoreNodeModels.CreateList node inside the .dyn file
Guid existingNodeGuid = new Guid("81c94fd0-35a0-4680-8535-00aff41192d3");
string openPath = Path.Combine(TestDirectory, @"core\DetailedPreviewMargin_Test.dyn");
RunModel(openPath);
//When a CreateNodeCommand is executed internally calls the GetNodeFromCommand() method
var command = new DynamoModel.CreateNodeCommand(existingNodeGuid.ToString(), "List.Create", 0, 0, true, true);
//Act
CurrentDynamoModel.ExecuteCommand(command);
//Assert
//Validating that the NodeCommand was successfully created.
Assert.IsNotNull(command);
Assert.AreEqual(command.Name, "List.Create");
Assert.AreEqual(command.ModelGuid.ToString(), existingNodeGuid.ToString());
}
public void FlagIsFalseWhenEvaluationStarted()
{
//On run start, HasRunWithoutCrash = false
// - This makes sure that if the user has modifies the file during a run that causes a crash, there
// file is not erroneously marked as having run without crash.
var ws = Open <HomeWorkspaceModel>(TestDirectory, crashProtDir, "runManual.dyn");
// We do a run so HasRunWithoutCrash is set to true. Otherwise, the test
// assertion is not valid.
BeginRun();
EmptyScheduler();
Assert.True(ws.HasRunWithoutCrash);
// Update the number input to ensure another run takes place
var n = ws.Nodes.OfType <Nodes.DoubleInput>().First();
CurrentDynamoModel.ExecuteCommand(
new DynamoModel.UpdateModelValueCommand(n.GUID, "Value", "3.0"));
// We'll need this flag to ensure the run is completed even when
// done async
var assertionComplete = false;
ws.EvaluationStarted += (e, a) =>
{
Assert.False(ws.HasRunWithoutCrash);
assertionComplete = true;
};
// Do the next run
BeginRun();
EmptyScheduler();
if (!assertionComplete)
{
Assert.Fail("The assertion was not evaluated!");
}
}
private void TestNodeToCodeUndoBase(string filePath)
{
// Verify after undo all nodes and connectors should be resotored back
// to original state.
OpenModel(filePath);
var wp = CurrentDynamoModel.CurrentWorkspace;
var nodeGuids = wp.Nodes.Select(n => n.GUID).ToList();
nodeGuids.Sort();
var connectorGuids = wp.Connectors.Select(c => c.GUID).ToList();
connectorGuids.Sort();
SelectAll(wp.Nodes);
var command = new DynamoModel.ConvertNodesToCodeCommand();
CurrentDynamoModel.ExecuteCommand(command);
var undo = new DynamoModel.UndoRedoCommand(DynamoModel.UndoRedoCommand.Operation.Undo);
CurrentDynamoModel.ExecuteCommand(undo);
var curNodeGuids = wp.Nodes.Select(n => n.GUID).ToList();
curNodeGuids.Sort();
var curConnectorGuids = wp.Connectors.Select(c => c.GUID).ToList();
curConnectorGuids.Sort();
Assert.AreEqual(curNodeGuids.Count, nodeGuids.Count);
Assert.IsTrue(nodeGuids.SequenceEqual(curNodeGuids));
Assert.AreEqual(curConnectorGuids.Count, connectorGuids.Count);
Assert.IsTrue(connectorGuids.SequenceEqual(curConnectorGuids));
}
public void CannotRemoveDefaultDSVarArgFunctionPorts()
{
// Arrange
string openPath = Path.Combine(TestDirectory, @"core\dsfunction\StringSplit.dyn");
OpenModel(openPath);
var nodeGuid = Guid.Parse("c969eca6005a4273aee4ed8ddd73f3ab");
var node = CurrentDynamoModel.CurrentWorkspace.NodeFromWorkspace <DSVarArgFunction>(nodeGuid);
int portCountBefore = node.InPorts.Count;
// Act
CurrentDynamoModel.ExecuteCommand(new DynCmd.ModelEventCommand(nodeGuid, "AddInPort", 1));
int portCountAfterAdd = node.InPorts.Count;
CurrentDynamoModel.ExecuteCommand(new DynCmd.ModelEventCommand(nodeGuid, "RemoveInPort", 1));
CurrentDynamoModel.ExecuteCommand(new DynCmd.ModelEventCommand(nodeGuid, "RemoveInPort", 1));
int portCountAfterRemove = node.InPorts.Count;
// Assert
Assert.AreEqual(2, portCountBefore);
Assert.AreEqual(3, portCountAfterAdd);
Assert.AreEqual(2, portCountAfterRemove);
}
public void DeletingImperativeCBNShouldNotLeadToCrash()
{
TaskStateChangedEventHandler evaluationDidNotFailHandler =
(DynamoScheduler sender, TaskStateChangedEventArgs args) =>
{
Assert.AreNotEqual(TaskStateChangedEventArgs.State.ExecutionFailed, args.CurrentState);
};
try
{
CurrentDynamoModel.Scheduler.TaskStateChanged += evaluationDidNotFailHandler;
OpenModel(@"core\imperative\delete_imperative_cbn_crash.dyn");
AssertPreviewValue("0692b19256834a9187f3bcd500d513f1", 5.86);
CurrentDynamoModel.ExecuteCommand(new DeleteModelCommand("45f0db0f-c014-481e-9b7f-939da54f2adc"));
CurrentDynamoModel.ExecuteCommand(new DeleteModelCommand("235f53ba-d913-45d0-986a-b9c6588cba45"));
AssertPreviewValue("0692b19256834a9187f3bcd500d513f1", 5.86);
Assert.AreEqual(2, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
}
finally
{
CurrentDynamoModel.Scheduler.TaskStateChanged -= evaluationDidNotFailHandler;
}
}
public void BeginDuplicateConnectionTest()
{
//Arrange
string openPath = Path.Combine(TestDirectory, @"core\DetailedPreviewMargin_Test.dyn");
RunModel(openPath);
Guid id = Guid.NewGuid();
//This guid belongs to a CoreNodeModels.CreateList node inside the .dyn file
Guid existingNodeGuid = new Guid("81c94fd0-35a0-4680-8535-00aff41192d3");
//Connection Command with one Input port using a new guid
var connectionCommand = new DynamoModel.MakeConnectionCommand(id, 0, PortType.Input, DynamoModel.MakeConnectionCommand.Mode.BeginDuplicateConnection);
//Connection Command with one Output port using a new guid
var connectionCommand2 = new DynamoModel.MakeConnectionCommand(id, 0, PortType.Output, DynamoModel.MakeConnectionCommand.Mode.BeginDuplicateConnection);
var watch1 = new Watch {
X = 100, Y = 300
};
CurrentDynamoModel.CurrentWorkspace.AddAndRegisterNode(watch1, false);
//Connection Command using a guid from a Watch node addded previosuly
var connectionCommand3 = new DynamoModel.MakeConnectionCommand(watch1.GUID, 0, PortType.Input, DynamoModel.MakeConnectionCommand.Mode.BeginDuplicateConnection);
//Act
//The ExecuteCommand method internally will execute the BeginDuplicateConnectionTest method
CurrentDynamoModel.ExecuteCommand(connectionCommand);
CurrentDynamoModel.ExecuteCommand(connectionCommand2);
CurrentDynamoModel.ExecuteCommand(connectionCommand3);
//Assert
//Validating that the commands were created successfully
Assert.IsNotNull(connectionCommand);
Assert.IsNotNull(connectionCommand2);
Assert.IsNotNull(connectionCommand3);
}
/// <summary>
/// Run the dyn file and get all preview values in string representation.
/// Undo, force run and get all preview values in string representation.
/// These two sets of preview value should be the same.
/// </summary>
/// <param name="dynFilePath"></param>
protected void UndoTest(string dynFilePath)
{
Dictionary <Guid, string> previewMap = new Dictionary <Guid, string>();
RunModel(dynFilePath);
foreach (var node in CurrentDynamoModel.CurrentWorkspace.Nodes)
{
previewMap[node.GUID] = GetStringData(node.GUID);
}
int nodeCount = CurrentDynamoModel.CurrentWorkspace.Nodes.Count();
int connectorCount = CurrentDynamoModel.CurrentWorkspace.Connectors.Count();
SelectAll();
var command = new DynamoModel.ConvertNodesToCodeCommand();
CurrentDynamoModel.ExecuteCommand(command);
CurrentDynamoModel.ForceRun();
var undo = new DynamoModel.UndoRedoCommand(DynamoModel.UndoRedoCommand.Operation.Undo);
CurrentDynamoModel.ExecuteCommand(undo);
CurrentDynamoModel.ForceRun();
// Verify after undo everything is OK
Assert.AreEqual(nodeCount, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
Assert.AreEqual(connectorCount, CurrentDynamoModel.CurrentWorkspace.Connectors.Count());
foreach (var node in CurrentDynamoModel.CurrentWorkspace.Nodes)
{
Assert.IsTrue(previewMap.ContainsKey(node.GUID));
var preValue = previewMap[node.GUID];
var currentValue = GetStringData(node.GUID);
Assert.AreEqual(preValue, currentValue);
}
}
public void Regress7808()
{
// Verify that updating the function defintion will execute code blocks node that use
// this function.
var dynFilePath = Path.Combine(TestDirectory, @"core\dsevaluation\regress7808.dyn");
OpenModel(dynFilePath);
// Original function defintion is
// def foo() { return = 21;}
var watchNodeGuid = "aef2375c-3dd8-4be0-8230-d964a2417f99";
AssertPreviewValue(watchNodeGuid, 21);
// change to
// def foo() { return = 42; }
var cbnGuid = Guid.Parse("6a260ba7-d658-4350-a777-49511f725454");
var command = new Models.DynamoModel.UpdateModelValueCommand(Guid.Empty, cbnGuid, "Code", @"def foo() { return = 42; }");
CurrentDynamoModel.ExecuteCommand(command);
RunCurrentModel();
AssertPreviewValue(watchNodeGuid, 42);
}
public void LiveRunnerServicesUpdateGraph()
{
//Arrange
var openPath = Path.Combine(TestDirectory, @"core\DetailedPreviewMargin_Test.dyn");
RunModel(openPath);
//With this flag set to true we reach the section for logging.
CurrentDynamoModel.EngineController.VerboseLogging = true;
//We cannot set the VerboseLogging flag before the Model is created then in order to execute the UpdateGraph()
//we need to call the OpenFileCommand again with the VerboseLogging already set to true
var openPath2 = Path.Combine(TestDirectory, @"core\Angle.dyn");
//Act
//Internally this will execute the UpdateGraph() method
var commandFile = new DynamoModel.OpenFileCommand(openPath2);
CurrentDynamoModel.ExecuteCommand(commandFile);
//Assert
//Verify that the command was created successfully
Assert.IsNotNull(commandFile);
}
public void SelectModelImplTest()
{
//Arrange
string openPath = Path.Combine(TestDirectory, @"core\DetailedPreviewMargin_Test.dyn");
RunModel(openPath);
//This will add a new DSFunction node to the current workspace
var addNode = new DSFunction(CurrentDynamoModel.LibraryServices.GetFunctionDescriptor("+"));
CurrentDynamoModel.CurrentWorkspace.AddAndRegisterNode(addNode, false);
//Select the node created (DSFunction)
DynamoSelection.Instance.Selection.Add(addNode);
var ids = DynamoSelection.Instance.Selection.OfType <NodeModel>().Select(x => x.GUID).ToList();
var selectCommand = new DynamoModel.SelectModelCommand(ids, ModifierKeys.Shift);
//Act
CurrentDynamoModel.ExecuteCommand(selectCommand);
//Assert
Assert.Greater(ids.Count, 0); //At least one guid was found
Assert.IsNotNull(selectCommand);
}
public void ModificationUITesting()
{
// Re-use code for creating a custom node
CanCreateAndPlaceNewCustomNode();
var instance = CurrentDynamoModel.CurrentWorkspace.Nodes.First() as Function;
SelectTabByGuid(instance.Definition.FunctionId);
var currentInPortAmt = 0;
var currentOutPortAmt = 0;
#region Adding
Func <string, Symbol> addInput = label =>
{
var node = new Symbol();
CurrentDynamoModel.ExecuteCommand(new DynamoModel.CreateNodeCommand(node, 0, 0, true, true));
node.InputSymbol = label;
Assert.AreEqual(++currentInPortAmt, instance.InPorts.Count);
Assert.AreEqual(label, instance.InPorts.Last().Name);
return(node);
};
Func <string, Output> addOutput = label =>
{
var node = new Output();
CurrentDynamoModel.ExecuteCommand(new DynamoModel.CreateNodeCommand(node, 0, 0, true, true));
node.Symbol = label;
Assert.AreEqual(++currentOutPortAmt, instance.OutPorts.Count);
Assert.AreEqual(label, instance.OutPorts.Last().Name);
return(node);
};
#endregion
#region Renaming
Action <Symbol, int, string> renameInput = (input, idx, s) =>
{
input.InputSymbol = s;
Assert.AreEqual(s, instance.InPorts[idx].Name);
};
Action <Output, int, string> renameOutput = (output, idx, s) =>
{
output.Symbol = s;
Assert.AreEqual(s, instance.OutPorts[idx].Name);
};
#endregion
#region Deleting
Action <NodeModel> deleteNode = nodeModel =>
{
DynamoSelection.Instance.ClearSelection();
CurrentDynamoModel.AddToSelection(nodeModel);
var command = new DynamoModel.DeleteModelCommand(Guid.Empty);
CurrentDynamoModel.ExecuteCommand(command);
};
Action <Symbol> deleteInput = input =>
{
deleteNode(input);
Assert.AreEqual(--currentInPortAmt, instance.InPorts.Count);
};
Action <Output> deleteOutput = output =>
{
deleteNode(output);
Assert.AreEqual(--currentOutPortAmt, instance.OutPorts.Count);
};
#endregion
//Add some outputs
var out1 = addOutput("output1");
var out2 = addOutput("output2");
//Add some inputs
var in1 = addInput("input1");
var in2 = addInput("input2");
//Change some names
renameInput(in1, 0, "test");
renameOutput(out2, 1, "something");
//Delete some ports
deleteInput(in2);
deleteOutput(out1);
}
private void UpdateCodeBlockNodeContent(CodeBlockNodeModel cbn, string value)
{
var command = new DynCmd.UpdateModelValueCommand(Guid.Empty, cbn.GUID, "Code", value);
CurrentDynamoModel.ExecuteCommand(command);
}
public void CanUpdatePythonTemplateSettings()
{
string settingDirectory = Path.Combine(TestDirectory, "settings");
string settingsFilePath = Path.Combine(settingDirectory, "DynamoSettings-PythonTemplate-initial.xml");
string changedSettingsFilePath = Path.Combine(settingDirectory, "DynamoSettings-PythonTemplate-changed.xml");
string initialPyFilePath = Path.Combine(settingDirectory, @"PythonTemplate-initial.py");
string changedPyFilePath = Path.Combine(settingDirectory, @"PythonTemplate-changed.py");
string initialPyVerificationText = "# Unit tests Python template example";
string updatedPyVerificationText = "# Changed Unit tests Python template example";
string pyTemplate = "";
string updatedPyTemplate = "";
// Assert files required for test exist
Assert.IsTrue(File.Exists(settingsFilePath));
Assert.IsTrue(File.Exists(initialPyFilePath));
Assert.IsTrue(File.Exists(changedPyFilePath));
// load initial settings
// Keep in mind the initial settings file for this test has only specified a filename, not a full path
var settings = PreferenceSettings.Load(settingsFilePath);
settings.PythonTemplateFilePath = Path.Combine(settingDirectory, settings.PythonTemplateFilePath);
// Assert path in settings file and in test match
Assert.AreEqual(settings.PythonTemplateFilePath, initialPyFilePath);
// Propagate Python template specified in settings file to DynamoModel & read it from *.py file
CurrentDynamoModel.PreferenceSettings.PythonTemplateFilePath = settings.PythonTemplateFilePath;
pyTemplate = File.ReadAllText(CurrentDynamoModel.PreferenceSettings.PythonTemplateFilePath);
// Assert the template actually reads and is not empty
Assert.IsNotEmpty(pyTemplate);
Assert.IsTrue(pyTemplate.StartsWith(initialPyVerificationText));
// Assert the workspace has no nodes
Assert.AreEqual(CurrentDynamoModel.CurrentWorkspace.Nodes.Count(), 0);
// create a Python nodeModel & add node to workspace
var firstPyNodeModel = new PythonNodeModels.PythonNode();
CurrentDynamoModel.ExecuteCommand(new DynCmd.CreateNodeCommand(firstPyNodeModel, 0, 0, true, false));
var firstPyNode = CurrentDynamoModel.CurrentWorkspace.Nodes.Last() as PythonNodeModels.PythonNode;
// Assert a new node has been added to workspace
Assert.AreEqual(CurrentDynamoModel.CurrentWorkspace.Nodes.Count(), 1);
// Assert both the new python nodeModel and workspace node have been
// initialised with the initial Python template
Assert.AreEqual(firstPyNodeModel.Script, pyTemplate);
Assert.AreEqual(firstPyNode.Script, pyTemplate);
Assert.IsTrue(firstPyNodeModel.Script.StartsWith(initialPyVerificationText));
Assert.IsTrue(firstPyNode.Script.StartsWith(initialPyVerificationText));
// change Python template & save settings to XML file
CurrentDynamoModel.PreferenceSettings.PythonTemplateFilePath = changedPyFilePath;
CurrentDynamoModel.PreferenceSettings.Save(changedSettingsFilePath);
// load updated settings
// no need for combining paths here as we have already done so before saving
settings = PreferenceSettings.Load(changedSettingsFilePath);
// update the DynamoModel settings
CurrentDynamoModel.PreferenceSettings.PythonTemplateFilePath = settings.PythonTemplateFilePath;
updatedPyTemplate = File.ReadAllText(CurrentDynamoModel.PreferenceSettings.PythonTemplateFilePath);
// Assert the updated template is applied and not empty
Assert.AreEqual(
CurrentDynamoModel.PreferenceSettings.PythonTemplateFilePath,
changedPyFilePath
);
Assert.IsNotEmpty(updatedPyTemplate);
Assert.IsTrue(updatedPyTemplate.StartsWith(updatedPyVerificationText));
// create a Python nodeModel & add node to workspace
var secondPyNodeModel = new PythonNodeModels.PythonNode();
CurrentDynamoModel.ExecuteCommand(new DynCmd.CreateNodeCommand(secondPyNodeModel, 100, 100, true, false));
var secondPyNode = CurrentDynamoModel.CurrentWorkspace.Nodes.Last() as PythonNodeModels.PythonNode;
// Assert a new node has been added to workspace
Assert.AreEqual(CurrentDynamoModel.CurrentWorkspace.Nodes.Count(), 2);
// Assert both the new python nodeModel and workspace node have been
// initialised with the updated Python template
Assert.AreEqual(secondPyNodeModel.Script, updatedPyTemplate);
Assert.AreEqual(secondPyNode.Script, updatedPyTemplate);
Assert.IsTrue(secondPyNodeModel.Script.StartsWith(updatedPyVerificationText));
Assert.IsTrue(secondPyNode.Script.StartsWith(updatedPyVerificationText));
}
public void TestWarningsOnNodeModel()
{
//Arrange
var cbn = new CodeBlockNodeModel(CurrentDynamoModel.LibraryServices);
var command = new DynamoModel.CreateNodeCommand(cbn, 0, 0, true, false);
CurrentDynamoModel.ExecuteCommand(command);
Assert.IsNotNull(cbn);
cbn.Warning("TestPermanent0", true);
cbn.Warning("TestPermanent1", true);
cbn.Warning("TestPermanent2", true);
Assert.AreEqual(ElementState.PersistentWarning, cbn.State);
Assert.AreEqual(string.Join("", new List <string>()
{
"TestPermanent0", "TestPermanent1", "TestPermanent2"
}), cbn.ToolTipText);
cbn.Warning("TestTransient0", false);
Assert.AreEqual(ElementState.Warning, cbn.State);
Assert.AreEqual(string.Join("", new List <string>()
{
"TestPermanent0", "TestPermanent1", "TestPermanent2", "\nTestTransient0"
}), cbn.ToolTipText);
cbn.ClearTransientWarning("TestTransientOther");
Assert.AreEqual(ElementState.Warning, cbn.State);
Assert.AreEqual(string.Join("", new List <string>()
{
"TestPermanent0", "TestPermanent1", "TestPermanent2", "\nTestTransient0"
}), cbn.ToolTipText);
cbn.ClearTransientWarning("TestTransient0");
Assert.AreEqual(ElementState.PersistentWarning, cbn.State);
Assert.AreEqual(string.Join("", new List <string>()
{
"TestPermanent0", "TestPermanent1", "TestPermanent2"
}), cbn.ToolTipText);
cbn.ClearErrorsAndWarnings();
Assert.AreEqual(ElementState.Active, cbn.State);
Assert.AreEqual("", cbn.ToolTipText);
cbn.Warning("TestPermanent0", true);
cbn.Warning("TestPermanent1", true);
cbn.Warning("TestPermanent2", true);
Assert.AreEqual(ElementState.PersistentWarning, cbn.State);
Assert.AreEqual(string.Join("", new List <string>()
{
"TestPermanent0", "TestPermanent1", "TestPermanent2"
}), cbn.ToolTipText);
cbn.Warning("TestTransient0", false);
Assert.AreEqual(ElementState.Warning, cbn.State);
Assert.AreEqual(string.Join("", new List <string>()
{
"TestPermanent0", "TestPermanent1", "TestPermanent2", "\nTestTransient0"
}), cbn.ToolTipText);
cbn.ClearTransientWarning();
Assert.AreEqual(ElementState.PersistentWarning, cbn.State);
Assert.AreEqual(string.Join("", new List <string>()
{
"TestPermanent0", "TestPermanent1", "TestPermanent2"
}), cbn.ToolTipText);
cbn.ClearErrorsAndWarnings();
Assert.AreEqual(ElementState.Active, cbn.State);
Assert.AreEqual("", cbn.ToolTipText);
}