private void ProceedKernelMessage(IntPtr wParam, IntPtr lParam)
{
CoreMsgEnum kParam = (CoreMsgEnum)wParam.ToInt32();
switch (kParam)
{
case CoreMsgEnum.Power_On:
{
this.DialogResult = CYReturnButton = DialogResult.Cancel;
this.Close();
break;
}
case CoreMsgEnum.Status_Change:
{
JetStatusEnum status = (JetStatusEnum)lParam.ToInt32();
if (status == JetStatusEnum.PowerOff || status == JetStatusEnum.Error)
{
this.DialogResult = CYReturnButton = DialogResult.Cancel;
this.Close();
}
break;
}
}
}
private void ProceedKernelMessage(IntPtr wParam, IntPtr lParam)
{
CoreMsgEnum kParam = (CoreMsgEnum)wParam.ToInt64();
switch (kParam)
{
case CoreMsgEnum.UpdaterPercentage:
{
int percentage = (int)lParam.ToInt64();
//OnPrintingProgressChanged(percentage);
string info = "";
string mPrintingFormat = ResString.GetUpdatingProgress();
info += "\n" + string.Format(mPrintingFormat, percentage);
this.m_StatusBarPanelPercent.Text = info;
break;
}
case CoreMsgEnum.Percentage:
{
int percentage = (int)lParam.ToInt64();
OnPrintingProgressChanged(percentage);
break;
}
case CoreMsgEnum.Job_Begin:
{
int startType = (int)lParam.ToInt64();
if (startType == 0)
{
}
else if (startType == 1)
{
//OnPrintingStart();
}
break;
}
case CoreMsgEnum.Job_End:
{
int endType = (int)lParam.ToInt64();
if (endType == 0)
{
}
else if (endType == 1)
{
//OnPrintingEnd();
}
break;
}
case CoreMsgEnum.Power_On:
{
int bPowerOn = (int)lParam.ToInt64();
if (bPowerOn != 0)
{
int bPropertyChanged, bSettingChanged;
SPrinterProperty sPrinterProperty;
SPrinterSetting sPrinterSetting;
m_allParam.PowerOnEvent(out bPropertyChanged, out bSettingChanged, out sPrinterProperty, out sPrinterSetting);
if (bPropertyChanged != 0)
{
OnPrinterPropertyChange(sPrinterProperty);
}
if (bSettingChanged != 0)
{
OnPrinterSettingChange(sPrinterSetting);
}
}
else
{
m_allParam.PowerOffEvent();
}
break;
}
case CoreMsgEnum.Status_Change:
{
int status = (int)lParam.ToInt64();
OnPrinterStatusChanged((JetStatusEnum)status);
break;
}
case CoreMsgEnum.ErrorCode:
{
OnErrorCodeChanged((int)lParam.ToInt64());
//For Updateing
int errorcode = (int)lParam.ToInt64();
SErrorCode serrorcode = new SErrorCode(errorcode);
ErrorCause cause = (ErrorCause)serrorcode.nErrorCause;
if (cause == ErrorCause.CoreBoard && (ErrorAction)serrorcode.nErrorAction == ErrorAction.Updating)
{
if (0 != serrorcode.n16ErrorCode)
{
if (serrorcode.n16ErrorCode == 1)
{
string info = ResString.GetEnumDisplayName(typeof(UISuccess), UISuccess.UpdateSuccess);
MessageBox.Show(info, this.Text, MessageBoxButtons.OK, MessageBoxIcon.Information);
}
else
{
string info = ResString.GetEnumDisplayName(typeof(UIError), UIError.UpdateFail);
MessageBox.Show(info, this.Text, MessageBoxButtons.OK, MessageBoxIcon.Information);
}
#if !LIYUUSB
CoreInterface.SendJetCommand((int)JetCmdEnum.ClearUpdatingStatus, 0);
#endif
}
}
break;
}
case CoreMsgEnum.Parameter_Change:
{
//m_LockUpdate = true;
SPrinterSetting sPrinterSetting = m_allParam.PrinterSetting;
if (CoreInterface.GetPrinterSetting(ref sPrinterSetting) == 0)
{
Debug.Assert(false);
}
else
{
OnPrinterSettingChange(sPrinterSetting);
}
//m_LockUpdate = false;
break;
}
case CoreMsgEnum.Ep6Pipe:
{
int ep6Cmd = (int)lParam.ToInt64() & 0x0000ffff;
int index = (((int)lParam.ToInt64()) >> 16);
byte[] bufep6 = null;
int buflen = 0;
int ret = (CoreInterface.GetEp6PipeData(ep6Cmd, index, bufep6, ref buflen));
if (ret != 0 && buflen > 0)
{
bufep6 = new byte[buflen];
if (CoreInterface.GetEp6PipeData(ep6Cmd, index, bufep6, ref buflen) != 0)
{
switch (bufep6[0])
{
case 0xD4:
if (QRCodeForm != null)
{
QRCodeForm.SetQrCode(bufep6);
}
break;
case 0xD3:
if (QRCodeForm != null)
{
QRCodeForm.FeedBack(bufep6);
}
break;
case 0xE6:
if (QRCodeForm != null)
{
QRCodeForm.SetQrCodeFromHead(bufep6);
}
break;
}
}
else
{
MessageBox.Show(ResString.GetResString("GetEp6PipeDatafail"));
}
}
//else
//{
// MessageBox.Show("GetEp6PipeData buflen fail!");
//}
}
break;
}
}
public void ProceedKernelMessage(IntPtr wParam, IntPtr lParam)
{
CoreMsgEnum kParam = (CoreMsgEnum)wParam.ToInt32();
switch (kParam)
{
case CoreMsgEnum.HardPanelDirty:
{
Ep6Cmd cmd = (Ep6Cmd)lParam.ToInt32();
switch (cmd)
{
case Ep6Cmd.EP6_CMD_T_WAVE_READ_READY:
{
FileLog("Ep6Cmd.EP6_CMD_T_WAVE_READ_READY");
Debug.WriteLine("Ep6Cmd.EP6_CMD_T_WAVE_READ_READY 波形预读完成");
int TotalLength = EpsonLCD.GetWaveDataTotalLength();
m_WaveData.NewParse2(HBTypeName, EpsonLCD.GetWaveData(TotalLength), m_CycleValue);
//保存刚刚获得的波形数据，在幅值方式为电压改变时有用
m_OriginalWaveSnips = new List <WaveDataSnip>(m_WaveData.WaveDatas);
////导入Wave和NM数据
//ImportWaveNMData();
//btnIFSSave.Enabled = true;
//m_Button_Import.Enabled = true;
}
break;
case Ep6Cmd.EP6_CMD_T_WAVE_SET_READY:
{
//波形发送完成，发送幅值
FileLog("Ep6Cmd.EP6_CMD_T_WAVE_SET_READY");
Debug.WriteLine("Ep6Cmd.EP6_CMD_T_WAVE_SET_READY 波形发送完成，发送幅值");
if (m_Waves.Count == 0)
{
break;
}
WaveDataEx WaveData = m_Waves[0];
m_AmplitudeToSends.Clear();
foreach (IAmplitude Amplitude in WaveData.Amplitudes)
{
m_AmplitudeToSends.Add(Amplitude);
}
if (0 == m_AmplitudeToSends.Count)
{
throw new Exception("0 == m_AmplitudeToSends.Count");
}
int Length = EpsonLCD.WriteAmplitudeData(m_AmplitudeToSends[0].GetBytes());
EpsonLCD.SetAmplitudeTotalLength(Length);
}
break;
case Ep6Cmd.EP6_CMD_T_SWING_READY:
{
FileLog("Ep6Cmd.EP6_CMD_T_SWING_READY");
Debug.WriteLine("Ep6Cmd.EP6_CMD_T_SWING_READY 幅值下发完成");
if (m_AmplitudeToSends.Count > 0)
{
m_AmplitudeToSends.RemoveAt(0);
}
if (m_AmplitudeToSends.Count > 0)
{
int Length = EpsonLCD.WriteAmplitudeData(m_AmplitudeToSends[0].GetBytes());
EpsonLCD.SetAmplitudeTotalLength(Length);
}
else
{
//幅值发送完成，发送新增加节点信息，暂时为空
byte[] NewNode = new byte[2];
NewNode[0] = 0xFF;
int Length = EpsonLCD.WriteNewAddNodeData(NewNode);
EpsonLCD.SetNewAddNodeTotalLength(1);
}
}
break;
case Ep6Cmd.EP6_CMD_T_WAVE_POINT_FINISH:
{
//新添加节点数据发送完成命令
FileLog("Ep6Cmd.EP6_CMD_T_WAVE_POINT_FINISH");
Debug.WriteLine("Ep6Cmd.EP6_CMD_T_WAVE_POINT_FINISH 新添加节点数据发送完成命令");
int Length = EpsonLCD.WriteWaveMappingData(ConstructWaveMapping());
EpsonLCD.SetWaveMappingTotalLength(Length);
}
break;
case Ep6Cmd.EP6_CMD_T_WAVE_NAME_READY:
//预读波形名字就绪，开始读波形名字
{
FileLog("Ep6Cmd.EP6_CMD_T_WAVE_NAME_READY");
Debug.WriteLine("Ep6Cmd.EP6_CMD_T_WAVE_NAME_READY 预读波形命令下发完成");
//取得波形名字总长度
int TotalSize = EpsonLCD.GetWaveNameTotalLength();
//取得波形名字数据
ParseWaveName(EpsonLCD.GetWaveNameData(TotalSize), TotalSize);
//预读映射表命令
EpsonLCD.PrepareReadWaveMapping();
}
break;
case Ep6Cmd.EP6_CMD_T_WAVE_NAME_FINISH:
//波形名字发送完成命令
{
FileLog("Ep6Cmd.EP6_CMD_T_WAVE_NAME_FINISH");
Debug.WriteLine("Ep6Cmd.EP6_CMD_T_WAVE_NAME_FINISH 波形名字修改发送完成命令");
MessageBox.Show(ResString.GetResString("Wave_Info_WaveNameUpdataFinish"), "Info", MessageBoxButtons.OK, MessageBoxIcon.Information);
ControlsEnable(true);
}
break;
case Ep6Cmd.EP6_CMD_T_WAVE_CHANNEL_FINISH:
//波形映射表完成命令
{
FileLog("Ep6Cmd.EP6_CMD_T_WAVE_CHANNEL_FINISH");
Debug.WriteLine("Ep6Cmd.EP6_CMD_T_WAVE_CHANNEL_FINISH 波形映射表完成命令");
//获得波形映射总长度
int TotalSize = EpsonLCD.GetWaveMappingTotalLength();
if (0 == TotalSize)
{
MessageBox.Show(ResString.GetResString("Wave_Info_ReadWaveMapping0Length"), "Error", MessageBoxButtons.OK, MessageBoxIcon.Error);
return;
}
//取得波形映射数据
ParseWaveMapping(EpsonLCD.GetWaveMappingData(TotalSize), TotalSize);
if (m_ImportMappingFlag == false)
{
//用户自定义
CustomInitialize();
//界面上所有控件显示
this.Visible = true;
//波形映射导入完成
m_ImportMappingFlag = true;
}
else
{
MessageBox.Show(ResString.GetResString("Wave_Info_WaveMappingReadFinish"), "Info", MessageBoxButtons.OK, MessageBoxIcon.Information);
ControlsEnable(true);
m_ComboBox_Channel_SelectedIndexChanged(null, null);
m_ComboBox_VSD_SelectedIndexChanged(null, null);
}
}
break;
}
}
break;
case CoreMsgEnum.Status_Change:
{
int status = lParam.ToInt32();
if ((JetStatusEnum)status == JetStatusEnum.Ready && IsAutoWave && IsAutoPrint && !IsAutoStop)
{
IsAutoPrint = false;
AutoUpdateVave();
}
else if ((JetStatusEnum)status == JetStatusEnum.Busy && IsAutoWave && !IsAutoPrint && !IsAutoStop)
{
IsAutoPrint = true;
}
break;
}
}
}
protected override void WndProc(ref System.Windows.Forms.Message msg)
{
const string LineEnd = "\r\n";
// Dispose user message.
if (msg.Msg == m_MessageUpdater)
{
int nMsg = (int)msg.WParam;
CoreMsgEnum coremsg = (CoreMsgEnum)nMsg;
switch (coremsg)
{
case CoreMsgEnum.Status_Change:
{
int status = msg.LParam.ToInt32();
// int portid = (int)msg.LParam;
// BoardEnum board = (BoardEnum)portid;
// m_TextBoxStatus.Text += ResString.GetEnumDisplayName(typeof(UpdateDisplay),UpdateDisplay.Status)+
// ResString.GetEnumDisplayName(typeof(UpdateDisplay),UpdateDisplay.Begin) +
// board.ToString();
m_TextBoxStatus.Text += status.ToString();
m_TextBoxStatus.Text += LineEnd;
}
break;
case CoreMsgEnum.Percentage:
{
int percent = (int)msg.LParam;
if (percent > 100)
{
percent = 100;
}
if (percent < 0)
{
percent = 0;
}
m_ProgressBarPercent.Value = (int)percent;
#if false
m_TextBoxStatus.Text += ResString.GetEnumDisplayName(typeof(UpdateDisplay), UpdateDisplay.Status) + percent.ToString() +
ResString.GetEnumDisplayName(typeof(UpdateDisplay), UpdateDisplay.Percentage);
m_TextBoxStatus.Text += LineEnd;
#endif
}
break;
case CoreMsgEnum.ErrorCode:
{
int errorcode = (int)msg.LParam;
// m_TextBoxStatus.Text += ResString.GetEnumDisplayName(typeof(UpdateDisplay),UpdateDisplay.Status) +
// ResString.GetEnumDisplayName(typeof(UpdateDisplay),UpdateDisplay.Failed);
m_TextBoxStatus.Text += SErrorCode.GetInfoFromErrCode(errorcode);
m_TextBoxStatus.Text += "[" + errorcode.ToString("X") + "]";
m_TextBoxStatus.Text += LineEnd;
SErrorCode serrorcode = new SErrorCode(errorcode);
ErrorCause cause = (ErrorCause)serrorcode.nErrorCause;
if (cause == ErrorCause.CoreBoard && (ErrorAction)serrorcode.nErrorAction == ErrorAction.Updating)
{
if (0 != serrorcode.n16ErrorCode)
{
CoreInterface.SendJetCommand((int)JetCmdEnum.ClearUpdatingStatus, 0);
}
if (serrorcode.n16ErrorCode == 1)
{
string info = ResString.GetEnumDisplayName(typeof(UISuccess), UISuccess.UpdateSuccess);
MessageBox.Show(info, this.Text, MessageBoxButtons.OK, MessageBoxIcon.Information);
}
else
{
string info = ResString.GetEnumDisplayName(typeof(UIError), UIError.UpdateFail);
MessageBox.Show(info, this.Text, MessageBoxButtons.OK, MessageBoxIcon.Information);
}
}
}
break;
case CoreMsgEnum.Job_Begin:
m_TextBoxStatus.Text += ResString.GetEnumDisplayName(typeof(UpdateDisplay), UpdateDisplay.Status) +
ResString.GetEnumDisplayName(typeof(UpdateDisplay), UpdateDisplay.Begin);
m_TextBoxStatus.Text += LineEnd;
break;
case CoreMsgEnum.Job_End:
m_TextBoxStatus.Text += ResString.GetEnumDisplayName(typeof(UpdateDisplay), UpdateDisplay.Status) +
ResString.GetEnumDisplayName(typeof(UpdateDisplay), UpdateDisplay.Success);
m_TextBoxStatus.Text += LineEnd;
break;
}
return;
}
base.WndProc(ref msg);
}