/// <summary>
/// modifies Drawing ribbon by adding two buttons used by the add-in
/// </summary>
private void modifyRibbon()
{
//get Command manager
cmdMan = m_inventorApplication.CommandManager;
//get control definitions
ctrlDefs = cmdMan.ControlDefinitions;
//define command category for add-in's buttons
cmdCat = cmdMan.CommandCategories.Add("Auto-Breaker", "Autodesk:CmdCategory:AutoBreaker", addInGuid);
//get 'Drawing' ribbon
drawingRibbon = m_inventorApplication.UserInterfaceManager.Ribbons["Drawing"];
//get 'Place Views' tab from 'Drawing' ribbon
placeTab = drawingRibbon.RibbonTabs["id_TabPlaceViews"];
//define 'Apply break' button
applyButton = ctrlDefs.AddButtonDefinition("Apply!", "Autodesk:AutoBreaker:ApplyButton", CommandTypesEnum.kQueryOnlyCmdType, addInGuid, "auto-break description", "auto-break tooltip", plus16obj, plus128obj, ButtonDisplayEnum.kAlwaysDisplayText);
applyButton.OnExecute += new ButtonDefinitionSink_OnExecuteEventHandler(customAction);
cmdCat.Add(applyButton);
//define 'Settings' button
settingsButton = ctrlDefs.AddButtonDefinition("Settings", "Autodesk:AutoBreaker:SettingsButton", CommandTypesEnum.kQueryOnlyCmdType, addInGuid, "auto-breaker settings description", "auto-break settings tool-tip", gear16obj, gear128obj, ButtonDisplayEnum.kAlwaysDisplayText);
settingsButton.OnExecute += new ButtonDefinitionSink_OnExecuteEventHandler(settingsClick);
cmdCat.Add(settingsButton);
//define panel in 'Place Views' tab
panel = placeTab.RibbonPanels.Add("Auto-Breaker", "Autodesk:AutoBreaker:AutoBreakerPanel", addInGuid);
controlApplyBreak = panel.CommandControls.AddButton(applyButton, true, true);
controlSettingsBreak = panel.CommandControls.AddButton(settingsButton, true, true);
}
public Button(string DisplayName, string internalName, string clientId, string description, string tooltip, Icon standarticon, Icon largeIcon, string catName = "CSharp")
{
try
{
stdole.IPictureDisp standartIconIPictureDisp;
standartIconIPictureDisp = OleCreateConverter.ImageToPictureDisp(standarticon.ToBitmap());
stdole.IPictureDisp largeIconIPictureDisp;
largeIconIPictureDisp = OleCreateConverter.ImageToPictureDisp(largeIcon.ToBitmap());
m_buttonDefinition = m_inventorApplication.CommandManager.ControlDefinitions.AddButtonDefinition(DisplayName,
"Autodesk:Macros:" + internalName, CommandTypesEnum.kNonShapeEditCmdType, clientId, description, tooltip, standartIconIPictureDisp,
largeIconIPictureDisp, ButtonDisplayEnum.kDisplayTextInLearningMode);
m_buttonDefinition.Enabled = true;
ButtonDefinition_OnExecuteEventDelegate = new ButtonDefinitionSink_OnExecuteEventHandler(ButtonDefinition_OnExecute);
m_buttonDefinition.OnExecute += ButtonDefinition_OnExecuteEventDelegate;
if (catName != "")
{
CommandCategory cat = u.get <CommandCategory>(m_inventorApplication.CommandManager.CommandCategories, c => c.DisplayName == catName) ??
m_inventorApplication.CommandManager.CommandCategories.Add(catName, "Autodesk:Macros:" + catName);
cat.Add(m_buttonDefinition);
}
}
catch (System.Exception ex)
{
MessageBox.Show(ex.ToString());
}
}
private ButtonDefinition GetShowTextButton(string addinId, Application application)
{
CommandCategory slotCmdCategory = application.CommandManager.CommandCategories.Add("Slot", "Autodesk:YourAddIn:ShowTextCmd", addinId);
var btn = new TestButton(application, addinId);
slotCmdCategory.Add(btn.ButtonDefinition);
return(btn.ButtonDefinition);
}
public void Activate(Inventor.ApplicationAddInSite addInSiteObject, bool firstTime)
{
// This method is called by Inventor when it loads the addin.
// The AddInSiteObject provides access to the Inventor Application object.
// The FirstTime flag indicates if the addin is loaded for the first time.
// Initialize AddIn members.
m_inventorApplication = addInSiteObject.Application;
// TODO: Add ApplicationAddInServer.Activate implementation.
// e.g. event initialization, command creation etc.
ControlDefinitions oCtrlDefs = m_inventorApplication.CommandManager.ControlDefinitions;
System.Reflection.Assembly assembly = System.Reflection.Assembly.GetExecutingAssembly();
string[] resources = assembly.GetManifestResourceNames();
System.IO.Stream oStream1 = assembly.GetManifestResourceStream("ZeroRibbon.resources.Icon1.ico");
System.IO.Stream oStream2 = assembly.GetManifestResourceStream("ZeroRibbon.resources.Icon2.ico");
System.Drawing.Icon oIcon1 = new System.Drawing.Icon(oStream1);
System.Drawing.Icon oIcon2 = new System.Drawing.Icon(oStream2);
object oIPictureDisp1 = AxHostConverter.ImageToPictureDisp(oIcon1.ToBitmap());
object oIPictureDisp2 = AxHostConverter.ImageToPictureDisp(oIcon2.ToBitmap());
try
{
Zero_GetStarted_LaunchPanel_ButtonDef = oCtrlDefs["Autodesk:ZeroRibbon:ButtonDef1"] as ButtonDefinition;
Zero_GetStarted_NewPanel_ButtonDef = oCtrlDefs["Autodesk:ZeroRibbon:ButtonDef2"] as ButtonDefinition;
}
catch (Exception ex)
{
Zero_GetStarted_LaunchPanel_ButtonDef = oCtrlDefs.AddButtonDefinition("Ribbon Demo1",
"Autodesk:ZeroRibbon:ButtonDef1",
CommandTypesEnum.kEditMaskCmdType,
addInGuid,
"Ribbon Demo",
"Ribbon Demo Description",
oIPictureDisp1,
oIPictureDisp1,
ButtonDisplayEnum.kDisplayTextInLearningMode);
Zero_GetStarted_NewPanel_ButtonDef = oCtrlDefs.AddButtonDefinition("Ribbon Demo2",
"Autodesk:ZeroRibbon:ButtonDef2",
CommandTypesEnum.kEditMaskCmdType,
addInGuid,
"Ribbon Demo",
"Ribbon Demo Description",
oIPictureDisp2,
oIPictureDisp2,
ButtonDisplayEnum.kDisplayTextInLearningMode);
CommandCategory cmdCat = m_inventorApplication.CommandManager.CommandCategories.Add("RibbonDemo C#", "Autodesk:CmdCategory:RibbonDemoC#", addInGuid);
cmdCat.Add(Zero_GetStarted_LaunchPanel_ButtonDef);
cmdCat.Add(Zero_GetStarted_NewPanel_ButtonDef);
}
Ribbon ribbon = m_inventorApplication.UserInterfaceManager.Ribbons["ZeroDoc"];
RibbonTab tab = ribbon.RibbonTabs["id_GetStarted"];
RibbonPanel built_panel = tab.RibbonPanels["id_Panel_Launch"];
built_panel.CommandControls.AddButton(Zero_GetStarted_LaunchPanel_ButtonDef, true);
RibbonPanel panel1 = tab.RibbonPanels.Add("Ribbon Demo", "Autodesk:RibbonDemoC#:Panel1", addInGuid, "", false);
panel1.CommandControls.AddButton(Zero_GetStarted_NewPanel_ButtonDef, true);
Zero_GetStarted_LaunchPanel_ButtonDef.OnExecute += new ButtonDefinitionSink_OnExecuteEventHandler(Zero_GetStarted_LaunchPanel_ButtonDef_OnExecute);
Zero_GetStarted_NewPanel_ButtonDef.OnExecute += new ButtonDefinitionSink_OnExecuteEventHandler(Zero_GetStarted_NewPanel_ButtonDef_OnExecute);
}
public void Activate(Inventor.ApplicationAddInSite addInSiteObject, bool firstTime)
{
try
{
//the Activate method is called by Inventor when it loads the addin
//the AddInSiteObject provides access to the Inventor Application object
//the FirstTime flag indicates if the addin is loaded for the first time
//initialize AddIn members
m_inventorApplication = addInSiteObject.Application;
InvAddIn.Button.InventorApplication = m_inventorApplication;
//initialize event delegates
m_userInterfaceEvents = m_inventorApplication.UserInterfaceManager.UserInterfaceEvents;
UserInterfaceEventsSink_OnResetCommandBarsEventDelegate = new UserInterfaceEventsSink_OnResetCommandBarsEventHandler(UserInterfaceEvents_OnResetCommandBars);
m_userInterfaceEvents.OnResetCommandBars += UserInterfaceEventsSink_OnResetCommandBarsEventDelegate;
UserInterfaceEventsSink_OnResetEnvironmentsEventDelegate = new UserInterfaceEventsSink_OnResetEnvironmentsEventHandler(UserInterfaceEvents_OnResetEnvironments);
m_userInterfaceEvents.OnResetEnvironments += UserInterfaceEventsSink_OnResetEnvironmentsEventDelegate;
UserInterfaceEventsSink_OnResetRibbonInterfaceEventDelegate = new UserInterfaceEventsSink_OnResetRibbonInterfaceEventHandler(UserInterfaceEvents_OnResetRibbonInterface);
m_userInterfaceEvents.OnResetRibbonInterface += UserInterfaceEventsSink_OnResetRibbonInterfaceEventDelegate;
//load image icons for UI items
IPictureDisp createMasterMIcon = AxHostConverter.ImageToPictureDisp(Resources.CreateMasterM.ToBitmap());
IPictureDisp createMasterMICON = AxHostConverter.ImageToPictureDisp(Resources.CreateMasterM.ToBitmap());
IPictureDisp helpIcon = AxHostConverter.ImageToPictureDisp(Resources.icon1.ToBitmap());
IPictureDisp helpICON = AxHostConverter.ImageToPictureDisp(Resources.icon1.ToBitmap());
//retrieve the GUID for this class
GuidAttribute addInCLSID;
addInCLSID = (GuidAttribute)GuidAttribute.GetCustomAttribute(typeof(StandardAddInServer), typeof(GuidAttribute));
string addInCLSIDString;
addInCLSIDString = "{" + addInCLSID.Value + "}";
//create buttons
ButtON = new BenjaminButton(
"MasterModel", "MasterModel:StandardAddInServer:BenjaminBUTTON", CommandTypesEnum.kShapeEditCmdType,
addInCLSIDString, "Create a Master Model File",
"keep the model simple", createMasterMIcon, createMasterMICON, ButtonDisplayEnum.kDisplayTextInLearningMode, false);
//ButtON.HeySherlock = (PartDocument) m_inventorApplication.ActiveDocument;
Help = new BenjaminButton(
"How to", "Help:StandardAddInServer:BenjaminBUTTON", CommandTypesEnum.kShapeEditCmdType,
addInCLSIDString, "Help Creating a Master Model File",
"keep the model simple", helpIcon, helpICON, ButtonDisplayEnum.kDisplayTextInLearningMode, true);
//create the command category
CommandCategory MasterMCmdCategory = m_inventorApplication.CommandManager.CommandCategories.Add("Master Model", "MasterModel:StandardAddInServer:BenjaminBUTTON", addInCLSIDString);
MasterMCmdCategory.Add(ButtON.ButtonDefinition);
MasterMCmdCategory.Add(Help.ButtonDefinition);
if (firstTime == true)
{
//access user interface manager
UserInterfaceManager userInterfaceManager;
userInterfaceManager = m_inventorApplication.UserInterfaceManager;
InterfaceStyleEnum interfaceStyle;
interfaceStyle = userInterfaceManager.InterfaceStyle;
//create the UI for classic interface
if (interfaceStyle == InterfaceStyleEnum.kClassicInterface)
{
//create toolbar
CommandBar MasterCommander;
MasterCommander = userInterfaceManager.CommandBars.Add("Master Model", "MasterModel:StandardAddInServer:BenjaminBUTTONToolbar", CommandBarTypeEnum.kRegularCommandBar, addInCLSIDString);
//add buttons to toolbar
MasterCommander.Controls.AddButton(ButtON.ButtonDefinition, 0);
MasterCommander.Controls.AddButton(Help.ButtonDefinition, 0);
//Get the 2d sketch environment base object
Inventor.Environment partToolEnvironment;
partToolEnvironment = userInterfaceManager.Environments["PMxPartSkEnvironment"];
//make this command bar accessible in the panel menu for the Tool environment.
partToolEnvironment.PanelBar.CommandBarList.Add(MasterCommander);
}
//create the UI for ribbon interface
else
{
//get the ribbon associated with part document
Inventor.Ribbons ribbons;
ribbons = userInterfaceManager.Ribbons;
Inventor.Ribbon partRibbon;
partRibbon = ribbons["Part"];
//get the tabs associated with part ribbon
RibbonTabs ribbonTabs;
ribbonTabs = partRibbon.RibbonTabs;
//get the Tool tab
RibbonTab partToolRibbonTab;
partToolRibbonTab = ribbonTabs["id_TabTools"];
//create a new panel with the tab
RibbonPanels ribbonPanels;
ribbonPanels = partToolRibbonTab.RibbonPanels;
partToolMasterRibbonPanel = ribbonPanels.Add("Master Model", "MasterModel:StandardAddInServer:BenjaminBUTTONRibbonPanel", "{DB59D9A7-EE4C-434A-BB5A-F93E8866E872}", "", false);
//add controls to the MasterModel panel
CommandControls partToolMasterRibbonPanelCtrls;
partToolMasterRibbonPanelCtrls = partToolMasterRibbonPanel.CommandControls;
//add the buttons to the ribbon panel
CommandControl MasterMoRiPaCtrl;
MasterMoRiPaCtrl = partToolMasterRibbonPanelCtrls.AddButton(ButtON.ButtonDefinition, false, true, "", false);
MasterMoRiPaCtrl = partToolMasterRibbonPanelCtrls.AddButton(Help.ButtonDefinition, false, true, "", false);
}
}
}
catch (Exception e)
{
MessageBox.Show(e.ToString());
}
}
public void Activate(Inventor.ApplicationAddInSite addInSiteObject, bool firstTime)
{
try
{
SetupDynamoPaths();
inventorApplication = addInSiteObject.Application;
PersistenceManager.InventorApplication = inventorApplication;
userInterfaceManager = inventorApplication.UserInterfaceManager;
//initialize event delegates
userInterfaceEvents = inventorApplication.UserInterfaceManager.UserInterfaceEvents;
UserInterfaceEventsSink_OnResetCommandBarsEventDelegate = new UserInterfaceEventsSink_OnResetCommandBarsEventHandler(UserInterfaceEvents_OnResetCommandBars);
userInterfaceEvents.OnResetCommandBars += UserInterfaceEventsSink_OnResetCommandBarsEventDelegate;
UserInterfaceEventsSink_OnResetEnvironmentsEventDelegate = new UserInterfaceEventsSink_OnResetEnvironmentsEventHandler(UserInterfaceEvents_OnResetEnvironments);
userInterfaceEvents.OnResetEnvironments += UserInterfaceEventsSink_OnResetEnvironmentsEventDelegate;
UserInterfaceEventsSink_OnResetRibbonInterfaceEventDelegate = new UserInterfaceEventsSink_OnResetRibbonInterfaceEventHandler(UserInterfaceEvents_OnResetRibbonInterface);
userInterfaceEvents.OnResetRibbonInterface += UserInterfaceEventsSink_OnResetRibbonInterfaceEventDelegate;
appEvents = inventorApplication.ApplicationEvents;
appEvents.OnActivateDocument += appEvents_OnActivateDocument;
appEvents.OnDeactivateDocument += appEvents_OnDeactivateDocument;
Icon dynamoIcon = Resources.logo_square_32x32;
//retrieve the GUID for this class
GuidAttribute addInCLSID;
addInCLSID = (GuidAttribute)GuidAttribute.GetCustomAttribute(this.GetType(), typeof(GuidAttribute));
string addInCLSIDString;
addInCLSIDString = "{" + addInCLSID.Value + "}";
dynamoAddinButton = new DynamoInventorAddinButton(
buttonDisplayName, buttonInternalName, CommandTypesEnum.kShapeEditCmdType,
addInCLSIDString, "Initialize Dynamo.",
"Dynamo is a visual programming environment for Inventor.", dynamoIcon, dynamoIcon, ButtonDisplayEnum.kDisplayTextInLearningMode);
CommandCategory assemblyUtilitiesCategory = inventorApplication.CommandManager.CommandCategories.Add(commandCategoryDisplayName, commandCategoryInternalName, addInCLSID);
assemblyUtilitiesCategory.Add(dynamoAddinButton.ButtonDefinition);
if (firstTime == true)
{
InterfaceStyleEnum interfaceStyle;
interfaceStyle = userInterfaceManager.InterfaceStyle;
if (interfaceStyle == InterfaceStyleEnum.kClassicInterface)
{
CommandBar assemblyUtilityCommandBar;
assemblyUtilityCommandBar = userInterfaceManager.CommandBars.Add(commandBarDisplayName,
commandBarInternalName,
CommandBarTypeEnum.kRegularCommandBar,
addInCLSID);
}
else
{
Inventor.Ribbons ribbons = userInterfaceManager.Ribbons;
Inventor.Ribbon assemblyRibbon = ribbons["Assembly"];
RibbonTabs ribbonTabs = assemblyRibbon.RibbonTabs;
RibbonTab assemblyRibbonTab = ribbonTabs["id_AddInsTab"];
RibbonPanels ribbonPanels = assemblyRibbonTab.RibbonPanels;
assemblyRibbonPanel = ribbonPanels.Add(ribbonPanelDisplayName, ribbonPanelInternalName, "{DB59D9A7-EE4C-434A-BB5A-F93E8866E872}", "", false);
CommandControls assemblyRibbonPanelCtrls = assemblyRibbonPanel.CommandControls;
CommandControl assemblyCmdBtnCmdCtrl = assemblyRibbonPanelCtrls.AddButton(dynamoAddinButton.ButtonDefinition, true, true, "", false);
Inventor.Ribbon partRibbon = ribbons["Part"];
RibbonTabs partRibbonTabs = partRibbon.RibbonTabs;
RibbonTab modelRibbonTab = partRibbonTabs["id_AddInsTab"];
RibbonPanels partRibbonPanels = modelRibbonTab.RibbonPanels;
partRibbonPanel = partRibbonPanels.Add(ribbonPanelDisplayName, ribbonPanelInternalName, "{DB59D9A7-EE4C-434A-BB5A-F93E8866E872}", "", false);
CommandControls partRibbonPanelCtrls = partRibbonPanel.CommandControls;
CommandControl partCmdBtnCmdCtrl = partRibbonPanelCtrls.AddButton(dynamoAddinButton.ButtonDefinition, true, true, "", false);
Inventor.Ribbon drawingRibbon = ribbons["Drawing"];
RibbonTabs drawingRibbonTabs = drawingRibbon.RibbonTabs;
RibbonTab drawingRibbonTab = drawingRibbonTabs["id_AddInsTab"];
RibbonPanels drawingRibbonPanels = drawingRibbonTab.RibbonPanels;
drawingRibbonPanel = drawingRibbonPanels.Add(ribbonPanelDisplayName, ribbonPanelInternalName, "{DB59D9A7-EE4C-434A-BB5A-F93E8866E872}", "", false);
CommandControls drawingRibbonPanelCtrls = drawingRibbonPanel.CommandControls;
CommandControl drawingCmdBtnCmdCtrl = drawingRibbonPanelCtrls.AddButton(dynamoAddinButton.ButtonDefinition, true, true, "", false);
}
}
}
catch (Exception e)
{
MessageBox.Show(e.ToString());
}
}
public void Activate(Inventor.ApplicationAddInSite addInSiteObject, bool firstTime)
{
try
{
//the Activate method is called by Inventor when it loads the addin
//the AddInSiteObject provides access to the Inventor Application object
//the FirstTime flag indicates if the addin is loaded for the first time
//initialize AddIn members
m_inventorApplication = addInSiteObject.Application;
Button.InventorApplication = m_inventorApplication;
//initialize event delegates
m_userInterfaceEvents = m_inventorApplication.UserInterfaceManager.UserInterfaceEvents;
UserInterfaceEventsSink_OnResetCommandBarsEventDelegate = new UserInterfaceEventsSink_OnResetCommandBarsEventHandler(UserInterfaceEvents_OnResetCommandBars);
m_userInterfaceEvents.OnResetCommandBars += UserInterfaceEventsSink_OnResetCommandBarsEventDelegate;
UserInterfaceEventsSink_OnResetEnvironmentsEventDelegate = new UserInterfaceEventsSink_OnResetEnvironmentsEventHandler(UserInterfaceEvents_OnResetEnvironments);
m_userInterfaceEvents.OnResetEnvironments += UserInterfaceEventsSink_OnResetEnvironmentsEventDelegate;
UserInterfaceEventsSink_OnResetRibbonInterfaceEventDelegate = new UserInterfaceEventsSink_OnResetRibbonInterfaceEventHandler(UserInterfaceEvents_OnResetRibbonInterface);
m_userInterfaceEvents.OnResetRibbonInterface += UserInterfaceEventsSink_OnResetRibbonInterfaceEventDelegate;
//load image icons for UI items
Icon addSlotOptionIcon = new Icon(this.GetType(), "AddSlotOption.ico");
Icon drawSlotIcon = new Icon(this.GetType(), "DrawSlot.ico");
Icon toggleSlotStateIcon = new Icon(this.GetType(), "ToggleSlotState.ico");
//retrieve the GUID for this class
GuidAttribute addInCLSID;
addInCLSID = (GuidAttribute)GuidAttribute.GetCustomAttribute(typeof(AddInServer), typeof(GuidAttribute));
string addInCLSIDString;
addInCLSIDString = "{" + addInCLSID.Value + "}";
//create the comboboxes
m_slotWidthComboBoxDefinition = m_inventorApplication.CommandManager.ControlDefinitions.AddComboBoxDefinition("Slot Width", "Autodesk:SimpleAddIn:SlotWidthCboBox", CommandTypesEnum.kShapeEditCmdType, 100, addInCLSIDString, "Slot width", "Slot width", Type.Missing, Type.Missing, ButtonDisplayEnum.kDisplayTextInLearningMode);
m_slotHeightComboBoxDefinition = m_inventorApplication.CommandManager.ControlDefinitions.AddComboBoxDefinition("Slot Height", "Autodesk:SimpleAddIn:SlotHeightCboBox", CommandTypesEnum.kShapeEditCmdType, 100, addInCLSIDString, "Slot height", "Slot height", Type.Missing, Type.Missing, ButtonDisplayEnum.kDisplayTextInLearningMode);
//add some initial items to the comboboxes
m_slotWidthComboBoxDefinition.AddItem("1 cm", 0);
m_slotWidthComboBoxDefinition.AddItem("2 cm", 0);
m_slotWidthComboBoxDefinition.AddItem("3 cm", 0);
m_slotWidthComboBoxDefinition.AddItem("4 cm", 0);
m_slotWidthComboBoxDefinition.AddItem("5 cm", 0);
m_slotWidthComboBoxDefinition.ListIndex = 1;
m_slotWidthComboBoxDefinition.ToolTipText = m_slotWidthComboBoxDefinition.Text;
m_slotWidthComboBoxDefinition.DescriptionText = "Slot width: " + m_slotWidthComboBoxDefinition.Text;
SlotWidthComboBox_OnSelectEventDelegate = new ComboBoxDefinitionSink_OnSelectEventHandler(SlotWidthComboBox_OnSelect);
m_slotWidthComboBoxDefinition.OnSelect += SlotWidthComboBox_OnSelectEventDelegate;
m_slotHeightComboBoxDefinition.AddItem("1 cm", 0);
m_slotHeightComboBoxDefinition.AddItem("2 cm", 0);
m_slotHeightComboBoxDefinition.AddItem("3 cm", 0);
m_slotHeightComboBoxDefinition.AddItem("4 cm", 0);
m_slotHeightComboBoxDefinition.AddItem("5 cm", 0);
m_slotHeightComboBoxDefinition.ListIndex = 1;
m_slotHeightComboBoxDefinition.ToolTipText = m_slotHeightComboBoxDefinition.Text;
m_slotHeightComboBoxDefinition.DescriptionText = "Slot height: " + m_slotHeightComboBoxDefinition.Text;
SlotHeightComboBox_OnSelectEventDelegate = new ComboBoxDefinitionSink_OnSelectEventHandler(SlotHeightComboBox_OnSelect);
m_slotHeightComboBoxDefinition.OnSelect += SlotHeightComboBox_OnSelectEventDelegate;
//create buttons
m_addSlotOptionButton = new AddSlotOptionButton(
"Add Slot width/height", "Autodesk:SimpleAddIn:AddSlotOptionCmdBtn", CommandTypesEnum.kShapeEditCmdType,
addInCLSIDString, "Adds option for slot width/height",
"Add slot option", addSlotOptionIcon, addSlotOptionIcon, ButtonDisplayEnum.kDisplayTextInLearningMode);
m_drawSlotButton = new DrawSlotButton(
"Draw Slot", "Autodesk:SimpleAddIn:DrawSlotCmdBtn", CommandTypesEnum.kShapeEditCmdType,
addInCLSIDString, "Create slot sketch graphics",
"Draw Slot", drawSlotIcon, drawSlotIcon, ButtonDisplayEnum.kDisplayTextInLearningMode);
m_toggleSlotStateButton = new ToggleSlotStateButton(
"Toggle Slot State", "Autodesk:SimpleAddIn:ToggleSlotStateCmdBtn", CommandTypesEnum.kShapeEditCmdType,
addInCLSIDString, "Enables/Disables state of slot command",
"Toggle Slot State", toggleSlotStateIcon, toggleSlotStateIcon, ButtonDisplayEnum.kDisplayTextInLearningMode);
//create the command category
CommandCategory slotCmdCategory = m_inventorApplication.CommandManager.CommandCategories.Add("Slot", "Autodesk:SimpleAddIn:SlotCmdCat", addInCLSIDString);
slotCmdCategory.Add(m_slotWidthComboBoxDefinition);
slotCmdCategory.Add(m_slotHeightComboBoxDefinition);
slotCmdCategory.Add(m_addSlotOptionButton.ButtonDefinition);
slotCmdCategory.Add(m_drawSlotButton.ButtonDefinition);
slotCmdCategory.Add(m_toggleSlotStateButton.ButtonDefinition);
if (firstTime == true)
{
//access user interface manager
UserInterfaceManager userInterfaceManager;
userInterfaceManager = m_inventorApplication.UserInterfaceManager;
InterfaceStyleEnum interfaceStyle;
interfaceStyle = userInterfaceManager.InterfaceStyle;
//create the UI for classic interface
if (interfaceStyle == InterfaceStyleEnum.kClassicInterface)
{
//create toolbar
CommandBar slotCommandBar;
slotCommandBar = userInterfaceManager.CommandBars.Add("Slot", "Autodesk:SimpleAddIn:SlotToolbar", CommandBarTypeEnum.kRegularCommandBar, addInCLSIDString);
//add comboboxes to toolbar
slotCommandBar.Controls.AddComboBox(m_slotWidthComboBoxDefinition, 0);
slotCommandBar.Controls.AddComboBox(m_slotHeightComboBoxDefinition, 0);
//add buttons to toolbar
slotCommandBar.Controls.AddButton(m_addSlotOptionButton.ButtonDefinition, 0);
slotCommandBar.Controls.AddButton(m_drawSlotButton.ButtonDefinition, 0);
slotCommandBar.Controls.AddButton(m_toggleSlotStateButton.ButtonDefinition, 0);
//Get the 2d sketch environment base object
Inventor.Environment partSketchEnvironment;
partSketchEnvironment = userInterfaceManager.Environments["PMxPartSketchEnvironment"];
//make this command bar accessible in the panel menu for the 2d sketch environment.
partSketchEnvironment.PanelBar.CommandBarList.Add(slotCommandBar);
}
//create the UI for ribbon interface
else
{
//get the ribbon associated with part document
Inventor.Ribbons ribbons;
ribbons = userInterfaceManager.Ribbons;
Inventor.Ribbon partRibbon;
partRibbon = ribbons["Part"];
//get the tabls associated with part ribbon
RibbonTabs ribbonTabs;
ribbonTabs = partRibbon.RibbonTabs;
RibbonTab partSketchRibbonTab;
partSketchRibbonTab = ribbonTabs["id_TabSketch"];
//create a new panel with the tab
RibbonPanels ribbonPanels;
ribbonPanels = partSketchRibbonTab.RibbonPanels;
m_partSketchSlotRibbonPanel = ribbonPanels.Add("Slot", "Autodesk:SimpleAddIn:SlotRibbonPanel", "{DB59D9A7-EE4C-434A-BB5A-F93E8866E872}", "", false);
//add controls to the slot panel
CommandControls partSketchSlotRibbonPanelCtrls;
partSketchSlotRibbonPanelCtrls = m_partSketchSlotRibbonPanel.CommandControls;
//add the combo boxes to the ribbon panel
CommandControl slotWidthCmdCboBoxCmdCtrl;
slotWidthCmdCboBoxCmdCtrl = partSketchSlotRibbonPanelCtrls.AddComboBox(m_slotWidthComboBoxDefinition, "", false);
CommandControl slotHeightCmdCboBoxCmdCtrl;
slotHeightCmdCboBoxCmdCtrl = partSketchSlotRibbonPanelCtrls.AddComboBox(m_slotHeightComboBoxDefinition, "", false);
//add the buttons to the ribbon panel
CommandControl drawSlotCmdBtnCmdCtrl;
drawSlotCmdBtnCmdCtrl = partSketchSlotRibbonPanelCtrls.AddButton(m_drawSlotButton.ButtonDefinition, false, true, "", false);
CommandControl slotOptionCmdBtnCmdCtrl;
slotOptionCmdBtnCmdCtrl = partSketchSlotRibbonPanelCtrls.AddButton(m_addSlotOptionButton.ButtonDefinition, false, true, "", false);
CommandControl toggleSlotStateCmdBtnCmdCtrl;
toggleSlotStateCmdBtnCmdCtrl = partSketchSlotRibbonPanelCtrls.AddButton(m_toggleSlotStateButton.ButtonDefinition, false, true, "", false);
}
}
MessageBox.Show("To access the commands of the sample addin, activate a 2d sketch of a part \n document and select the \"AddInSlot\" toolbar within the panel menu");
}
catch (Exception e)
{
MessageBox.Show(e.ToString());
}
}
public void Activate(Inventor.ApplicationAddInSite addInSiteObject, bool firstTime)
{
// authorization procedure
_isAuthorize = true;
if (_isAuthorize)
{
// Initialize AddIn members.
_app = addInSiteObject.Application;
#region UI INIT
Image exportImg = TemplateAdskInventor.Properties.Resources.Button;
_exportPict = ImageConversion.ImageToPictureDisp(exportImg);
// get command manager
_cmdMan = _app.CommandManager;
// defne comand catagory for addin buttons
_cmdCat = _cmdMan.CommandCategories.Add(
_panelDisplayName, "flecheria:CmdCategory:TemplateAdskInventor",
_addInGuid);
ControlDefinitions ctrlDefs = _app.CommandManager.ControlDefinitions;
try
{
_exportBtnDef = ctrlDefs["flecheria:TemplateAdskInventor:TestButton"] as ButtonDefinition;
}
catch (Exception ex)
{
#region BUTTON CREATION
ExportButton exportBtn = new ExportButton(_app,
"Export Obj", "flecheria:TemplateAdskInventor:ExportObj",
CommandTypesEnum.kQueryOnlyCmdType, _addInGuid,
"Export Obj with data",
"Export Obj with data and tree information",
_exportPict, _exportPict,
ButtonDisplayEnum.kAlwaysDisplayText);
_exportBtnDef = exportBtn.ButtonDefinition;
_cmdCat.Add(_exportBtnDef);
#endregion
Debug.WriteLine(ex.Message);
}
// create panel interface
if (firstTime)
{
try
{
if (_app.UserInterfaceManager.InterfaceStyle == InterfaceStyleEnum.kRibbonInterface)
{
#region RIBBON AND PANELS
// getting ribbons
Ribbon startedRib = _app.UserInterfaceManager.Ribbons["ZeroDoc"];
//Ribbon partRib = _app.UserInterfaceManager.Ribbons["Part"];
//Ribbon assemblyRib = _app.UserInterfaceManager.Ribbons["Assembly"];
//Ribbon drawingRib = _app.UserInterfaceManager.Ribbons["Drawing"];
// getting tab
RibbonTab startedTab = startedRib.RibbonTabs["id_GetStarted"];
//RibbonTab partTab = partRib.RibbonTabs["id_AddInsTab"];
//RibbonTab assemblyTab = assemblyRib.RibbonTabs["id_AddInsTab"];
//RibbonTab drawingTab = drawingRib.RibbonTabs["id_AddInsTab"];
_startedPanel = startedTab.RibbonPanels.Add(_panelDisplayName,
"flecheria:TemplateAdskInventor:AOEPanelStart", _addInGuid, "", false);
//_partPanel = partTab.RibbonPanels.Add(_panelDisplayName,
// "flecheria:TemplateAdskInventor:AOEPanelPart", _addInGuid, "", false);
//_assemblyPanel = assemblyTab.RibbonPanels.Add(_panelDisplayName,
// "flecheria:TemplateAdskInventor:AOEPanelAssembly", _addInGuid, "", false);
//_drawingPanel = drawingTab.RibbonPanels.Add(_panelDisplayName,
// "flecheria:TemplateAdskInventor:AOEPanelDrawing", addInGuid, "", false);
#endregion
#region CREATE BUTTON ON STARTED TAB
CommandControl startExportControl = _startedPanel.CommandControls.AddButton(
_exportBtnDef, false, true, "", true);
#endregion
}
}
catch (Exception ex)
{
MessageBox.Show(ex.Message, "TemplateAdskInventor Error");
Debug.Write(ex.Message);
}
}
#endregion
}
}
public void Activate(Inventor.ApplicationAddInSite addInSiteObject, bool firstTime)
{
try
{
//the Activate method is called by Inventor when it loads the addin
//the AddInSiteObject provides access to the Inventor Application object
//the FirstTime flag indicates if the addin is loaded for the first time
//initialize AddIn members
m_inventorApplication = addInSiteObject.Application;
Button.InventorApplication = m_inventorApplication;
//initialize event delegates
m_userInterfaceEvents = m_inventorApplication.UserInterfaceManager.UserInterfaceEvents;
UserInterfaceEventsSink_OnResetCommandBarsEventDelegate = new UserInterfaceEventsSink_OnResetCommandBarsEventHandler(UserInterfaceEvents_OnResetCommandBars);
m_userInterfaceEvents.OnResetCommandBars += UserInterfaceEventsSink_OnResetCommandBarsEventDelegate;
UserInterfaceEventsSink_OnResetEnvironmentsEventDelegate = new UserInterfaceEventsSink_OnResetEnvironmentsEventHandler(UserInterfaceEvents_OnResetEnvironments);
m_userInterfaceEvents.OnResetEnvironments += UserInterfaceEventsSink_OnResetEnvironmentsEventDelegate;
UserInterfaceEventsSink_OnResetRibbonInterfaceEventDelegate = new UserInterfaceEventsSink_OnResetRibbonInterfaceEventHandler(UserInterfaceEvents_OnResetRibbonInterface);
m_userInterfaceEvents.OnResetRibbonInterface += UserInterfaceEventsSink_OnResetRibbonInterfaceEventDelegate;
//load image icons for UI items
//PROBLEM: i CAN NOT ADD ANOTHER ICON EXCEPT FOR SYSTEM... HOW TO DO THIS?
// Icon anisotropyIcon = new Icon(this.GetType(), "\\AddSlotOption.ico");
Icon addSlotOptionIcon = new Icon(SystemIcons.Exclamation, 32, 32);
//retrieve the GUID for this class
GuidAttribute addInCLSID;
addInCLSID = (GuidAttribute)GuidAttribute.GetCustomAttribute(typeof(StandardAddInServer), typeof(GuidAttribute));
string addInCLSIDString;
addInCLSIDString = "{" + addInCLSID.Value + "}";
//create button
m_addSlotOptionButton = new AddSlotOptionButton(
"Add pattern", "Autodesk:Mugen:AddAnisotropyOptionCmdBtn", CommandTypesEnum.kShapeEditCmdType,
addInCLSIDString, "Creates an anisotropic pattern on a given surface",
"Add Anisotropic Pattern", addSlotOptionIcon, addSlotOptionIcon, ButtonDisplayEnum.kDisplayTextInLearningMode);
//create the command category
CommandCategory slotCmdCategory = m_inventorApplication.CommandManager.CommandCategories.Add("Anisotropy", "Autodesk:Mugen:AnisotropyCmdCat", addInCLSIDString);
slotCmdCategory.Add(m_addSlotOptionButton.ButtonDefinition);
if (firstTime == true)
{
//access user interface manager
UserInterfaceManager userInterfaceManager;
userInterfaceManager = m_inventorApplication.UserInterfaceManager;
InterfaceStyleEnum interfaceStyle;
interfaceStyle = userInterfaceManager.InterfaceStyle;
//create the UI for classic interface
if (interfaceStyle == InterfaceStyleEnum.kClassicInterface)
{
//create toolbar
CommandBar slotCommandBar;
slotCommandBar = userInterfaceManager.CommandBars.Add("Anisotropy", "Autodesk:Mugen:AnistropyToolbar", CommandBarTypeEnum.kRegularCommandBar, addInCLSIDString);
//add buttons to toolbar
slotCommandBar.Controls.AddButton(m_addSlotOptionButton.ButtonDefinition, 0);
//Get the 2d sketch environment base object
Inventor.Environment partSketchEnvironment;
partSketchEnvironment = userInterfaceManager.Environments["PMxPartEnvironment"];
//make this command bar accessible in the panel menu for the 2d sketch environment.
partSketchEnvironment.PanelBar.CommandBarList.Add(slotCommandBar);
}
//create the UI for ribbon interface
else
{
//get the ribbon associated with part document
Inventor.Ribbons ribbons;
ribbons = userInterfaceManager.Ribbons;
Inventor.Ribbon partRibbon;
partRibbon = ribbons["Part"];
//get the tabls associated with part ribbon
RibbonTabs ribbonTabs;
ribbonTabs = partRibbon.RibbonTabs;
RibbonTab partSketchRibbonTab;
partSketchRibbonTab = ribbonTabs["id_TabTools"];
//create a new panel with the tab
RibbonPanels ribbonPanels;
ribbonPanels = partSketchRibbonTab.RibbonPanels;
m_partSketchSlotRibbonPanel = ribbonPanels.Add("Anysotropy", "Autodesk:Mugen:AnysotropyRibbonPanel", "{cc527b4d-c28d-40fb-a46a-4978db960594}", "", false);
//add controls to the slot panel
CommandControls partSketchSlotRibbonPanelCtrls;
partSketchSlotRibbonPanelCtrls = m_partSketchSlotRibbonPanel.CommandControls;
//add the buttons to the ribbon panel
CommandControl drawSlotCmdBtnCmdCtrl;
drawSlotCmdBtnCmdCtrl = partSketchSlotRibbonPanelCtrls.AddButton(m_addSlotOptionButton.ButtonDefinition, false, true, "", false);
}
}
MessageBox.Show("This is a Carnegie Mellon University :: CERLAB test of \nAnisotropic Geometric Features Pattern Generation \nfor Industrial Design on Higly Curved Surfaces \nUsing Riemannian Metric Tensor fields \n\nAuthor: Diego Andrade \n\n2014");
}
catch (Exception e)
{
MessageBox.Show(e.ToString());
}
}
public void Activate(Inventor.ApplicationAddInSite addInSiteObject, bool firstTime)
{
try
{
// This method is called by Inventor when it loads the addin.
// The AddInSiteObject provides access to the Inventor Application object.
// The FirstTime flag indicates if the addin is loaded for the first time.
#region Initialize AddIn members and event delegate
// Initialize AddIn members.
m_inventorApplication = addInSiteObject.Application;
//Initialize event delegates
m_userInterfaceEvents = m_inventorApplication.UserInterfaceManager.UserInterfaceEvents;
UserInterfaceEventsSink_OnResetCommandBarsEventDelegate = new UserInterfaceEventsSink_OnResetCommandBarsEventHandler(UserInterfaceEvents_OnResetCommandBars);
m_userInterfaceEvents.OnResetCommandBars += UserInterfaceEventsSink_OnResetCommandBarsEventDelegate;
UserInterfaceEventsSink_OnEnvironmentChangeEventDelegate = new UserInterfaceEventsSink_OnEnvironmentChangeEventHandler(UserInterfaceEvents_OnEnvironmentChange);
m_userInterfaceEvents.OnEnvironmentChange += UserInterfaceEventsSink_OnEnvironmentChangeEventDelegate;
UserInterfaceEventsSink_OnResetRibbonInterfaceEventDelegate = new UserInterfaceEventsSink_OnResetRibbonInterfaceEventHandler(UserInterfaceEventsSink_OnResetRibbonInterface);
m_userInterfaceEvents.OnResetRibbonInterface += UserInterfaceEventsSink_OnResetRibbonInterfaceEventDelegate;
#endregion
// TODO: Add ApplicationAddInServer.Activate implementation.
// e.g. event initialization, command creation etc.
String strAddInGUID = "{" + ((GuidAttribute)System.Attribute.GetCustomAttribute(typeof(StandardAddInServer), typeof(GuidAttribute))).Value + "}";
m_strAddInGUID = strAddInGUID;
#region 创建按钮. create the buttons
//get all the names of the current assembly
this.IconPictureInitial();
//-----------------------------------------------------------------------------------
//create the instance of the "BlockGenerator" command and button
m_blockFormCmd = new BlockFormCmd();
this.CreateButton(
"ValveBlockDesign.resources.BlockStandard.ico",
"ValveBlockDesign.resources.BlockLarge.ico",
m_blockFormCmd,
"块",
"AppBlockGenerateCmd",
CommandTypesEnum.kShapeEditCmdType,
strAddInGUID,
"Generate a block",
"Generate a block with parameters entered by user",
ButtonDisplayEnum.kDisplayTextInLearningMode,
false);
//-----------------------------------------------------------------------------------
//create the instance of the "Align" command and button
m_alignCmd = new AlignCmd();
this.CreateButton(
"ValveBlockDesign.resources.AlignStandard.ico",
"ValveBlockDesign.resources.AlignLarge.ico",
m_alignCmd,
"对齐",
"AppAlignCmd",
CommandTypesEnum.kShapeEditCmdType,
strAddInGUID,
"Cavity align",
"Cavity align",
ButtonDisplayEnum.kDisplayTextInLearningMode,
false);
//-----------------------------------------------------------------------------------
//create the instance of the "ExtractiFeature" command and button
m_extractiFeatureCmd = new ExtractiFeatureCmd();
this.CreateButton(
"ValveBlockDesign.resources.ExtractiFeatureStandard.ico",
"ValveBlockDesign.resources.ExtractiFeatureLarge.ico",
m_extractiFeatureCmd,
"提取模型",
"AppExtractiFeatureCmd",
CommandTypesEnum.kShapeEditCmdType,
strAddInGUID,
"提取特征",
"提取特征",
ButtonDisplayEnum.kDisplayTextInLearningMode,
false);
//-----------------------------------------------------------------------------------
//create the instance of the "InsertiFeature" command and button
m_iFeatureFormCmd = new iFeatureFormCmd();
this.CreateButton(
"ValveBlockDesign.resources.InsertiFeatureStandard.ico",
"ValveBlockDesign.resources.InsertiFeatureLarge.ico",
m_iFeatureFormCmd,
"元件特征",
"AppInsertiFeatureCmd",
CommandTypesEnum.kShapeEditCmdType,
strAddInGUID,
"插入特征",
"插入特征",
ButtonDisplayEnum.kDisplayTextInLearningMode,
false);
//-----------------------------------------------------------------------------------
//create the instance of the "DeleteiFeature" command and button
m_deleteCmd = new DeleteCmd();
this.CreateButton(
"ValveBlockDesign.resources.DeleteCmdStandard.ico",
"ValveBlockDesign.resources.DeleteCmdLarge.ico",
m_deleteCmd,
"删除",
"AppDeleteiFeatureCmd",
CommandTypesEnum.kShapeEditCmdType,
strAddInGUID,
"删除特征",
"删除特征",
ButtonDisplayEnum.kDisplayTextInLearningMode,
false);
//-----------------------------------------------------------------------------------
//create the instance of the "RotateiFeature" command and button
m_rotateCmd = new RotateCmd();
this.CreateButton(
"ValveBlockDesign.resources.RotateCmdStandard.ico",
"ValveBlockDesign.resources.RotateCmdLarge.ico",
m_rotateCmd,
"旋转",
"AppRotateiFeatureCmd",
CommandTypesEnum.kShapeEditCmdType,
strAddInGUID,
"旋转特征",
"旋转特征",
ButtonDisplayEnum.kDisplayTextInLearningMode,
false);
//-----------------------------------------------------------------------------------
//create the instance of the "InsertOutline" command and button
m_insertOutlineCmd = new InsertOutlineCmd();
this.CreateButton(
"ValveBlockDesign.resources.InsertiFeatureStandard.ico",
"ValveBlockDesign.resources.OutLineCmdLarge.ico",
m_insertOutlineCmd,
"安装外形",
"AppInsertOutlineCmd",
CommandTypesEnum.kShapeEditCmdType,
strAddInGUID,
"插入安装外形",
"插入安装外形",
ButtonDisplayEnum.kDisplayTextInLearningMode,
false);
//-----------------------------------------------------------------------------------
//create the instance of the "Move" command and button
m_moveCmd = new MoveCmd();
this.CreateButton(
"ValveBlockDesign.resources.MoveCmdStandard.ico",
"ValveBlockDesign.resources.MoveCmdLarge.ico",
m_moveCmd,
"移动",
"AppMoveCmd",
CommandTypesEnum.kShapeEditCmdType,
strAddInGUID,
"移动孔",
"移动孔",
ButtonDisplayEnum.kDisplayTextInLearningMode,
false);
//-----------------------------------------------------------------------------------
//create the instance of the "Connect" command and button
m_connectCmd = new ConnectCmd();
this.CreateButton(
"ValveBlockDesign.resources.ConnectStandard.ico",
"ValveBlockDesign.resources.ConnectLarge.ico",
m_connectCmd,
"连接",
"AppConnectCmd",
CommandTypesEnum.kShapeEditCmdType,
strAddInGUID,
"连接孔",
"连接孔",
ButtonDisplayEnum.kDisplayTextInLearningMode,
false);
//-----------------------------------------------------------------------------------
//create the instance of the "Edit" command and button
m_cavityLibraryEditCmd = new CavityLibraryEditCmd();
this.CreateButton(
"ValveBlockDesign.resources.EditCavityCmdStandard.ico",
"ValveBlockDesign.resources.EditCavityCmdLarge.ico",
m_cavityLibraryEditCmd,
"修改元件",
"AppEditLibraryCmd",
CommandTypesEnum.kShapeEditCmdType,
strAddInGUID,
"修改元件参数",
"修改元件参数",
ButtonDisplayEnum.kDisplayTextInLearningMode,
false);
//-----------------------------------------------------------------------------------
//create the instance of the "Add" command and button
m_cavityLibraryAddCmd = new CavityLibraryAddCmd();
this.CreateButton(
"ValveBlockDesign.resources.AddCavityCmdStandard.ico",
"ValveBlockDesign.resources.AddCavityCmdLarge.ico",
m_cavityLibraryAddCmd,
"添加元件",
"AppAddLibraryCmd",
CommandTypesEnum.kShapeEditCmdType,
strAddInGUID,
"添加新元件",
"添加新元件",
ButtonDisplayEnum.kDisplayTextInLearningMode,
false);
//-----------------------------------------------------------------------------------
m_cavityLibraryScanCmd = new CavityLibraryScanCmd();
this.CreateButton(
"ValveBlockDesign.resources.ScanCavityCmdStandard.ico",
"ValveBlockDesign.resources.ScanCavityCmdLarge.ico",
m_cavityLibraryScanCmd,
"浏览元件",
"AppScanLibraryCmd",
CommandTypesEnum.kShapeEditCmdType,
strAddInGUID,
"浏览库中元件",
"浏览库中元件",
ButtonDisplayEnum.kDisplayTextInLearningMode,
false);
//-----------------------------------------------------------------------------------
m_boltHolesFormCmd = new BoltHolesFormCmd();
this.CreateButton(
"ValveBlockDesign.resources.BoltHolesCmdStandard.ico",
"ValveBlockDesign.resources.BoltHolesCmdLarge.ico",
m_boltHolesFormCmd,
"安装螺纹孔",
"AppInsertBoltHolesCmd",
CommandTypesEnum.kShapeEditCmdType,
strAddInGUID,
"插入安装螺纹孔",
"插入安装螺纹孔",
ButtonDisplayEnum.kDisplayTextInLearningMode,
false);
//---------------------------------------------------------------------------------
m_insertXportCmd = new InsertXportCmd();
this.CreateButton(
"ValveBlockDesign.resources.BoltHolesCmdStandard.ico",
"ValveBlockDesign.resources.Xport.ico",
m_insertXportCmd,
"工艺孔",
"AppInsertXportCmd",
CommandTypesEnum.kShapeEditCmdType,
strAddInGUID,
"插入工艺孔",
"插入工艺孔",
ButtonDisplayEnum.kDisplayTextInLearningMode,
false);
//---------------------------------------------------------------------------------
m_editNetCmd = new EditNetCmd();
this.CreateButton(
"ValveBlockDesign.resources.BoltHolesCmdStandard.ico",
"ValveBlockDesign.resources.EditColor.ico",
m_editNetCmd,
"修改网络",
"AppEditNetCmd",
CommandTypesEnum.kShapeEditCmdType,
strAddInGUID,
"修改油孔网络",
"修改油孔网络",
ButtonDisplayEnum.kDisplayTextInLearningMode,
false);
//---------------------------------------------------------------------------------
#endregion
#region 设置ChangeManager和CommandCategory. Set the ChangeManager and CommandCategory
//Create change definitions
//get the change manager
ChangeManager oChangeManager = m_inventorApplication.ChangeManager;
//Create the change definition collections
ChangeDefinitions oChangeDefs = oChangeManager.Add(strAddInGUID);
//-----------------------------------------------------------------------------------
//Create the "Block" change definition
ChangeDefinition oBlockChangeDef = oChangeDefs.Add("AppBlockGenerateChgDef", "块");
//Create the command category
CommandCategory oBlockCmdCategory = m_inventorApplication.CommandManager.CommandCategories.Add("块", "AppBlockGenerateCmdCat", strAddInGUID);
oBlockCmdCategory.Add(m_blockFormCmd.ButtonDefinition);
//-----------------------------------------------------------------------------------
ChangeDefinition oAlignChangeDef = oChangeDefs.Add("AppAlignChgDef", "对齐");
CommandCategory oAlignCmdCategory = m_inventorApplication.CommandManager.CommandCategories.Add("对齐", "AppAlignCmdCat", strAddInGUID);
oAlignCmdCategory.Add(m_alignCmd.ButtonDefinition);
//-----------------------------------------------------------------------------------
ChangeDefinition oExtractiFeatureChangeDef = oChangeDefs.Add("AppExtractiFeatureChgDef", "提取特征");
CommandCategory oExtractiFeatureCmdCategory = m_inventorApplication.CommandManager.CommandCategories.Add("提取特征", "AppExtractiFeatureCmdCat", strAddInGUID);
oExtractiFeatureCmdCategory.Add(m_extractiFeatureCmd.ButtonDefinition);
//-----------------------------------------------------------------------------------
ChangeDefinition oInsertiFeatureChangeDef = oChangeDefs.Add("AppInsertiFeatureChgDef", "插入特征");
CommandCategory oInsertiFeatureCmdCategory = m_inventorApplication.CommandManager.CommandCategories.Add("插入特征", "AppInsertiFeatureCmdCat", strAddInGUID);
oInsertiFeatureCmdCategory.Add(m_iFeatureFormCmd.ButtonDefinition);
//-----------------------------------------------------------------------------------
ChangeDefinition oDeleteiFeatureChangeDef = oChangeDefs.Add("AppDeleteiFeatureChgDef", "删除特征");
CommandCategory oDeleteiFeatureCmdCategory = m_inventorApplication.CommandManager.CommandCategories.Add("删除特征", "AppDeleteiFeatureCmdCat", strAddInGUID);
oDeleteiFeatureCmdCategory.Add(m_deleteCmd.ButtonDefinition);
//-----------------------------------------------------------------------------------
ChangeDefinition oRotateiFeatureChangeDef = oChangeDefs.Add("AppRotateiFeatureChgDef", "旋转特征");
CommandCategory oRotateiFeatureCmdCategory = m_inventorApplication.CommandManager.CommandCategories.Add("旋转特征", "AppRotateiFeatureCmdCat", strAddInGUID);
oRotateiFeatureCmdCategory.Add(m_rotateCmd.ButtonDefinition);
//-----------------------------------------------------------------------------------
ChangeDefinition oMoveChangeDef = oChangeDefs.Add("AppMoveChgDef", "移动孔");
CommandCategory oMoveCmdCategory = m_inventorApplication.CommandManager.CommandCategories.Add("移动孔", "AppMoveCmdCat", strAddInGUID);
oMoveCmdCategory.Add(m_moveCmd.ButtonDefinition);
//-----------------------------------------------------------------------------------
ChangeDefinition oInsertOutlineChangeDef = oChangeDefs.Add("AppInsertOutlineChgDef", "插入安装外形");
CommandCategory oInsertOutlineCmdCategory = m_inventorApplication.CommandManager.CommandCategories.Add("插入安装外形", "AppInsertOutlineCmdCat", strAddInGUID);
oInsertOutlineCmdCategory.Add(m_insertOutlineCmd.ButtonDefinition);
//-----------------------------------------------------------------------------------
ChangeDefinition oInsertXportChangeDef = oChangeDefs.Add("AppInsertXportChgDef", "插入工艺孔");
CommandCategory oInsertXportCmdCategory = m_inventorApplication.CommandManager.CommandCategories.Add("插入工艺孔", "AppInsertXportCmdCat", strAddInGUID);
oInsertXportCmdCategory.Add(m_insertXportCmd.ButtonDefinition);
//-----------------------------------------------------------------------------------
ChangeDefinition oEditNetChangeDef = oChangeDefs.Add("AppEditNetChgDef", "修改油孔网络");
CommandCategory oEitNetCmdCategory = m_inventorApplication.CommandManager.CommandCategories.Add("修改油孔网络", "AppEditNetCmdCat", strAddInGUID);
oEitNetCmdCategory.Add(m_editNetCmd.ButtonDefinition);
//-----------------------------------------------------------------------------------
ChangeDefinition oConnectDef = oChangeDefs.Add("AppConnectChgDef", "连接");
CommandCategory oConnectCmdCategory = m_inventorApplication.CommandManager.CommandCategories.Add("连接", "AppConnectCmdCat", strAddInGUID);
oConnectCmdCategory.Add(m_connectCmd.ButtonDefinition);
//-----------------------------------------------------------------------------------
ChangeDefinition oEditLibraryDef = oChangeDefs.Add("AppEditLibraryChgDef", "修改参数");
CommandCategory oEditLibraryCategory = m_inventorApplication.CommandManager.CommandCategories.Add("修改参数", "AppEditLibraryCmdCat", strAddInGUID);
oEditLibraryCategory.Add(m_cavityLibraryEditCmd.ButtonDefinition);
//-----------------------------------------------------------------------------------
ChangeDefinition oAddLibraryDef = oChangeDefs.Add("AppAddLibraryChgDef", "添加特征元件");
CommandCategory oAddLibraryCategory = m_inventorApplication.CommandManager.CommandCategories.Add("添加特征元件", "AppAddLibraryCmdCat", strAddInGUID);
oAddLibraryCategory.Add(m_cavityLibraryAddCmd.ButtonDefinition);
//-----------------------------------------------------------------------------------
ChangeDefinition oScanLibraryDef = oChangeDefs.Add("AppScanLibraryChgDef", "浏览特征元件");
CommandCategory oScanLibraryCategory = m_inventorApplication.CommandManager.CommandCategories.Add("浏览特征元件", "AppScanLibraryCmdCat", strAddInGUID);
oScanLibraryCategory.Add(m_cavityLibraryScanCmd.ButtonDefinition);
//-----------------------------------------------------------------------------------
ChangeDefinition oInsertBoltHolesDef = oChangeDefs.Add("AppInsertBoltHolesChgDef", "插入安装螺纹孔");
CommandCategory oInsertBoltHolesCategory = m_inventorApplication.CommandManager.CommandCategories.Add("插入安装螺纹孔", "AppInsertBoltHolesCmdCat", strAddInGUID);
oInsertBoltHolesCategory.Add(m_boltHolesFormCmd.ButtonDefinition);
//-----------------------------------------------------------------------------------
#endregion
#region 加载Ribbon面板. Load the Ribbon Panel.
if (firstTime)
{
Ribbon partDocRibbon;
partDocRibbon = m_inventorApplication.UserInterfaceManager.Ribbons["Part"];
RibbonTab myRibbonTab;
myRibbonTab = partDocRibbon.RibbonTabs.Add(
"阀块设计",
"id_TabBlockDesign",
strAddInGUID,
"",
false);
RibbonPanels ribbonPanels;
ribbonPanels = myRibbonTab.RibbonPanels;
RibbonPanel cubePanel;
cubePanel = ribbonPanels.Add(
"块",
"id_Panel_Block",
strAddInGUID,
"",
false);
CommandControls blockPanelCtrls;
blockPanelCtrls = cubePanel.CommandControls;
CommandControl cubePanelCtrl;
cubePanelCtrl = blockPanelCtrls.AddButton(
m_blockFormCmd.ButtonDefinition,
true,
true,
"",
false);
//------------------------------------------------------------------
//----------------------------------------------
//对iFeature特征操作
RibbonPanel iFeaturePanel;
iFeaturePanel = ribbonPanels.Add(
"插入",
"id_Panel_iFeature",
strAddInGUID,
"",
false);
CommandControls iFeatureCtrls;
iFeatureCtrls = iFeaturePanel.CommandControls;
CommandControl InsertiFeatureCtrl;//插入元件
InsertiFeatureCtrl = iFeatureCtrls.AddButton(
m_iFeatureFormCmd.ButtonDefinition,
true,
true,
"",
false);
CommandControl InsertOutlineCtrl;//插入安装外形
InsertOutlineCtrl = iFeatureCtrls.AddButton(
m_insertOutlineCmd.ButtonDefinition,
true,
true,
"",
true);
CommandControl InsertBoltHolesCtrl;//安装螺纹孔
InsertBoltHolesCtrl = iFeatureCtrls.AddButton(
m_boltHolesFormCmd.ButtonDefinition,
true,
true,
"",
false);
//-------------------------------------------------------------------------------
//RibbonPanel connectPanel;
//connectPanel = ribbonPanels.Add(
// "连接",
// "id_Panel_Connect",
// strAddInGUID,
// "",
// false);
//CommandControls connectCtrls;
//connectCtrls = connectPanel.CommandControls;
RibbonPanel modifyPanel;
modifyPanel = ribbonPanels.Add(
"修改",
"id_Panel_Edit",
strAddInGUID,
"",
false);
CommandControls modifyCtrls;
modifyCtrls = modifyPanel.CommandControls;
CommandControl AlignCtrl;
AlignCtrl = modifyCtrls.AddButton(
m_alignCmd.ButtonDefinition,
true,
true,
"",
false);
CommandControl MoveCtrl;
MoveCtrl = modifyCtrls.AddButton(
m_moveCmd.ButtonDefinition,
true,
true,
"",
false);
CommandControl DeleteCtrl;//删除元件特征
DeleteCtrl = modifyCtrls.AddButton(
m_deleteCmd.ButtonDefinition,
true,
true,
"",
false);
CommandControl EditPortCtrl;//修改网络
EditPortCtrl = modifyCtrls.AddButton(
m_editNetCmd.ButtonDefinition,
true,
true,
"",
true);
CommandControl RotateCtrl;//旋转元件特征
RotateCtrl = modifyCtrls.AddButton(
m_rotateCmd.ButtonDefinition,
true,
true,
"",
false);
//--------------------------------------------------------
RibbonPanel ConnectPanel;
ConnectPanel = ribbonPanels.Add(
"连通油路",
"id_Panel_Connection",
strAddInGUID,
"",
false);
CommandControls ConnectCtrls;
ConnectCtrls = ConnectPanel.CommandControls;
CommandControl ConnectCtrl;
ConnectCtrl = ConnectCtrls.AddButton(
m_connectCmd.ButtonDefinition,
true,
true,
"",
false);
CommandControl InsertXportCtrl;//插入工艺孔
InsertXportCtrl = ConnectCtrls.AddButton(
m_insertXportCmd.ButtonDefinition,
true,
true,
"",
true);
//------------------------------------------------------------
//元件库的操作面板
RibbonPanel CavityLibraryPanel;
CavityLibraryPanel = ribbonPanels.Add(
"元件库",
"id_Panel_CavityLibrary",
strAddInGUID,
"",
false);
CommandControls CavityLibraryCtrls;
CavityLibraryCtrls = CavityLibraryPanel.CommandControls;
CommandControl EditCavityCtrl;
EditCavityCtrl = CavityLibraryCtrls.AddButton(
m_cavityLibraryEditCmd.ButtonDefinition,
true,
true,
"",
false);
CommandControl AddCavityCtrl;
AddCavityCtrl = CavityLibraryCtrls.AddButton(
m_cavityLibraryAddCmd.ButtonDefinition,
true,
true,
"",
false);
CommandControl ScanCavityCtrl;
ScanCavityCtrl = CavityLibraryCtrls.AddButton(
m_cavityLibraryScanCmd.ButtonDefinition,
true,
true,
"",
false);
CommandControl ExtractiFeatureCtrl;
ExtractiFeatureCtrl = CavityLibraryCtrls.AddButton(
m_extractiFeatureCmd.ButtonDefinition,
true,
true,
"",
false);
}
#endregion
}
catch (Exception ex)
{
System.Windows.Forms.MessageBox.Show(ex.ToString());
}
}
//Loads With Inventor
public void Activate(Inventor.ApplicationAddInSite addInSiteObject, bool firstTime)
{
// This method is called by Inventor when it loads the addin.
// The AddInSiteObject provides access to the Inventor Application object.
// The FirstTime flag indicates if the addin is loaded for the first time.
// Initialize AddIn members.
m_inventorApplication = addInSiteObject.Application;
// TODO: Add ApplicationAddInServer.Activate implementation.
// e.g. event initialization, command creation etc.
System.Reflection.Assembly assembly = System.Reflection.Assembly.GetExecutingAssembly();
string[] resources = assembly.GetManifestResourceNames();
Icon oIcon32 = new Icon(PowerViewsAndGroups.Properties.Resources.Icon2, PowerViewsAndGroups.Properties.Resources.Icon2.Width, PowerViewsAndGroups.Properties.Resources.Icon2.Height);
Icon oIcon16 = new Icon(PowerViewsAndGroups.Properties.Resources.Icon1, PowerViewsAndGroups.Properties.Resources.Icon1.Width, PowerViewsAndGroups.Properties.Resources.Icon1.Height);
object oIPictureDisp32 = AxHostConverter.ImageToPictureDisp(oIcon32.ToBitmap());
object oIPictureDisp16 = AxHostConverter.ImageToPictureDisp(oIcon16.ToBitmap());
try
{
_buttonDef1 = m_inventorApplication.CommandManager.ControlDefinitions[ControlDefinitions] as ButtonDefinition;
}
catch (Exception)
{
_buttonDef1 = m_inventorApplication.CommandManager.ControlDefinitions.AddButtonDefinition(DisplayName, InternalName, CommandTypesEnum.kUpdateWithReferencesCmdType,
addInGuid,
DescriptionText,
ToolTipText,
oIPictureDisp16,
oIPictureDisp32,
ButtonDisplayEnum.kDisplayTextInLearningMode);
CommandCategory cmdCat = m_inventorApplication.CommandManager.CommandCategories.Add(DescriptionText, InternalName, addInGuid);
cmdCat.Add(_buttonDef1);
}
if (firstTime)
{
try
{
if (m_inventorApplication.UserInterfaceManager.InterfaceStyle == InterfaceStyleEnum.kRibbonInterface)
{
Ribbon ribbon = m_inventorApplication.UserInterfaceManager.Ribbons[ModelType];
RibbonTab tab = ribbon.RibbonTabs[ID_Tab];
try
{
RibbonPanel panel = tab.RibbonPanels.Add(DescriptionText, RibbonInternalName, addInGuid, "", false);
CommandControl control1 = panel.CommandControls.AddButton(_buttonDef1, true, true, "", false);
}
catch //(Exception ex)
{
}
}
else
{
CommandBar m_CommandBar = m_inventorApplication.UserInterfaceManager.CommandBars[CommandBarsName];
m_CommandBar.Controls.AddButton(_buttonDef1, 0);
}
}
catch
{
CommandBar oCommandBar = m_inventorApplication.UserInterfaceManager.CommandBars[CommandBarsName];
oCommandBar.Controls.AddButton(_buttonDef1, 0);
}
}
_buttonDef1.OnExecute += new ButtonDefinitionSink_OnExecuteEventHandler(_buttonDef1_OnExecute);
MessageBox.Show("PGroups");
}
public void Activate(Inventor.ApplicationAddInSite addInSiteObject, bool firstTime)
{
// This method is called by Inventor when it loads the addin.
// The AddInSiteObject provides access to the Inventor Application object.
// The FirstTime flag indicates if the addin is loaded for the first time.
// Initialize AddIn members.
m_inventorApplication = addInSiteObject.Application;
// TODO: Add ApplicationAddInServer.Activate implementation.
// e.g. event initialization, command creation etc.
ControlDefinitions oCtrlDefs = m_inventorApplication.CommandManager.ControlDefinitions;
System.Reflection.Assembly assembly = System.Reflection.Assembly.GetExecutingAssembly();
string[] resources = assembly.GetManifestResourceNames();
System.IO.Stream oStream32 = assembly.GetManifestResourceStream("RibbonDemoAddin.resources.button 32x32.ico");
System.IO.Stream oStream16 = assembly.GetManifestResourceStream("RibbonDemoAddin.resources.button 16x16.ico");
System.Drawing.Icon oIcon32 = new System.Drawing.Icon(oStream32);
System.Drawing.Icon oIcon16 = new System.Drawing.Icon(oStream16);
object oIPictureDisp32 = AxHostConverter.ImageToPictureDisp(oIcon32.ToBitmap());
object oIPictureDisp16 = AxHostConverter.ImageToPictureDisp(oIcon16.ToBitmap());
try
{
_buttonDef1 = oCtrlDefs["Autodesk:BrowserDemo:ButtonDef1"] as ButtonDefinition;
}
catch (Exception ex)
{
_buttonDef1 = oCtrlDefs.AddButtonDefinition("Ribbon Demo1",
"Autodesk:RibbonDemoC#:ButtonDef1",
CommandTypesEnum.kEditMaskCmdType,
addInGuid,
"Ribbon Demo",
"Ribbon Demo Description",
oIPictureDisp16,
oIPictureDisp32,
ButtonDisplayEnum.kDisplayTextInLearningMode);
CommandCategory cmdCat = m_inventorApplication.CommandManager.CommandCategories.Add("RibbonDemo C#", "Autodesk:CmdCategory:RibbonDemoC#", addInGuid);
cmdCat.Add(_buttonDef1);
}
if (firstTime)
{
try
{
if (m_inventorApplication.UserInterfaceManager.InterfaceStyle == InterfaceStyleEnum.kRibbonInterface)
{
Ribbon ribbon = m_inventorApplication.UserInterfaceManager.Ribbons["Part"];
RibbonTab tab = ribbon.RibbonTabs["id_TabModel"];
try
{
RibbonPanel panel = tab.RibbonPanels.Add("Ribbon Demo", "Autodesk:RibbonDemoC#:Panel1", addInGuid, "", false);
CommandControl control1 = panel.CommandControls.AddButton(_buttonDef1, true, true, "", false);
}
catch (Exception ex)
{
}
}
else
{
CommandBar oCommandBar = m_inventorApplication.UserInterfaceManager.CommandBars["PMxPartFeatureCmdBar"];
oCommandBar.Controls.AddButton(_buttonDef1, 0);
}
}
catch
{
CommandBar oCommandBar = m_inventorApplication.UserInterfaceManager.CommandBars["PMxPartFeatureCmdBar"];
oCommandBar.Controls.AddButton(_buttonDef1, 0);
}
}
_buttonDef1.OnExecute += new ButtonDefinitionSink_OnExecuteEventHandler(_buttonDef1_OnExecute);
}