private void SelectPartFileBtn_Click(object sender, EventArgs e) { //初始路徑 //openFileDialog1.InitialDirectory = @"C:"; openFileDialog1.Filter = "Part Files (*.prt)|*.prt|All Files (*.*)|*.*"; DialogResult result = openFileDialog1.ShowDialog(); if (result == DialogResult.OK) { //取得檔案名稱(檔名+副檔名) labelPartFileName.Text = openFileDialog1.SafeFileName; //取得檔案完整路徑(路徑+檔名+副檔名) PartPath = openFileDialog1.FileName; //開啟選擇的檔案 CaxPart.OpenBaseDisplay(PartPath); } }
private void OK_Click(object sender, EventArgs e) { try { if (MOT_File == "") { return; } BasePart newAsmPart; if (!CaxPart.OpenBaseDisplay(MOT_File, out newAsmPart)) { CaxLog.ShowListingWindow("MOT開啟失敗!"); return; } this.Close(); } catch (System.Exception ex) { } }
private void buttonOpenTask_Click(object sender, EventArgs e) { #region (註解)檢查是否有選擇組裝方式 /* * if (SeleOperValue == "001") * { * if (check001HasBillet.Checked == false && check001NoBillet.Checked == false) * { * MessageBox.Show("請選擇一種組裝方式"); * return; * } * if (check001HasBillet.Checked == true && check001NoBillet.Checked == false) * { * if (label001.Text == "") * { * MessageBox.Show("請選擇一個零件當作胚料檔,或勾選無胚料檔"); * return; * } * } * } * else if (SeleOperValue == "900") * { * * } * else * { * if (checkWHasBillet.Checked == false && checkWNoBillet.Checked == false) * { * MessageBox.Show("請選擇一種組裝方式"); * return; * } * if (checkWHasBillet.Checked == true && checkWHasBillet.Checked == false) * { * if (labelW.Text == "") * { * MessageBox.Show("請選擇一個前段工序檔當作此工序零件檔,或勾選無前段工序檔"); * return; * } * } * } */ #endregion if (SelePartName == "") { MessageBox.Show("請選擇欲開啟的零件!"); return; } string Local_CAMPartFullPath = string.Format(@"{0}\{1}\{2}\{3}\{4}\{5}", CaxEnv.GetLocalTaskDir(), comboBoxCus.Text, comboBoxPartNo.Text, comboBoxCusVer.Text, comboBoxOpVer.Text, SelePartName); //組件存在,直接開啟任務組立 BasePart newAsmPart; status = CaxPart.OpenBaseDisplay(Local_CAMPartFullPath, out newAsmPart); if (!status) { CaxLog.ShowListingWindow("組立開啟失敗!"); return; } /* * //判斷組件是否曾經被開啟。如已被開啟過,則開啟檔案後離開;反之則塞上屬性(Title=IsOpend,Value=Y)並組裝客戶零件與胚料零件 * string checkIsOpened = ""; * try * { * checkIsOpened = newAsmPart.GetStringAttribute("ISOPENED"); * if (checkIsOpened == "Y") * { * CaxPart.Save(); * this.Close(); * return; * } * } * catch (System.Exception ex) * { * newAsmPart.SetAttribute("ISOPENED", "Y"); * } * * NXOpen.Assemblies.Component newComponent = null; * #region 組裝客戶檔案 * * string Local_NewModelPartFullPath = string.Format(@"{0}\{1}\{2}\{3}\{4}", CaxEnv.GetLocalTaskDir(), * CurrentCusName, * CurrentPartNo, * CurrentCusVer, * CurrentPartNo + ".prt"); * //判斷是否已經有客戶檔案,如果沒有則複製過來 * if (!System.IO.File.Exists(Local_NewModelPartFullPath)) * { * File.Copy(Local_ModelPartFullPath, Local_NewModelPartFullPath, true); * } * * status = CaxAsm.AddComponentToAsmByDefault(Local_NewModelPartFullPath, out newComponent); * if (!status) * { * CaxLog.ShowListingWindow("ERROR,組裝失敗!"); * return; * } * #endregion * * CaxAsm.SetWorkComponent(null); * #region 建立三階製程檔 * * string Local_CurrentOperPartFullPath = ""; * if (groupBox001.Enabled == true) * { * if (check001NoBillet.Checked == true) * { * //選擇無胚料檔--新建檔案(檔名:料號_TE_製程序) * Local_CurrentOperPartFullPath = string.Format(@"{0}\{1}", Local_ShareStrPartFullPath, CurrentPartNo + "_TE_" + SeleOperValue + ".prt"); * if (!System.IO.File.Exists(Local_CurrentOperPartFullPath)) * { * status = CaxAsm.CreateNewEmptyComp(Local_CurrentOperPartFullPath, out newComponent); * if (!status) * { * CaxLog.ShowListingWindow("建立二階製程檔失敗"); * return; * } * } * } * else * { * //選擇有胚料檔--組裝胚料檔(檔名:胚料檔原始名稱) * Local_CurrentOperPartFullPath = string.Format(@"{0}\{1}", Local_ShareStrPartFullPath, label001.Text); * if (!System.IO.File.Exists(Local_CurrentOperPartFullPath)) * { * status = CaxAsm.AddComponentToAsmByDefault(Local_CurrentOperPartFullPath, out newComponent); * if (!status) * { * CaxLog.ShowListingWindow("001胚料檔組裝失敗"); * return; * } * } * } * } * else if (groupBox900.Enabled == true) * { * } * else * { #region W階 * //組立"前段製程檔" * if (checkWHasBillet.Checked == true & System.IO.File.Exists(labelWBilletPath)) * { * //複製檔案到任務資料夾 * string tempBilletPath = labelWBilletPath; * tempBilletPath = tempBilletPath.Replace(Path.GetDirectoryName(tempBilletPath), Path.GetDirectoryName(Local_NewModelPartFullPath)); * File.Copy(labelWBilletPath, tempBilletPath, true); * * status = CaxAsm.AddComponentToAsmByDefault(tempBilletPath, out newComponent); * if (!status) * { * CaxLog.ShowListingWindow("W階胚料檔組裝失敗"); * return; * } * } * * //選擇無前段製程檔案--新建檔案(檔名:料號_TE_製程序) * Local_CurrentOperPartFullPath = string.Format(@"{0}\{1}", Local_ShareStrPartFullPath, CurrentPartNo + "_TE_" + SeleOperValue + ".prt"); * if (!System.IO.File.Exists(Local_CurrentOperPartFullPath)) * { * status = CaxAsm.CreateNewEmptyComp(Local_CurrentOperPartFullPath, out newComponent); * if (!status) * { * CaxLog.ShowListingWindow("建立三階製程檔失敗"); * return; * } * } #endregion * } * #endregion */ CaxPart.Save(); this.Close(); }
private void buttonOpenTask_Click(object sender, EventArgs e) { #region 檢查是否有選擇組裝方式 if (SeleOperValue == "001") { if (check001HasBillet.Checked == false && check001NoBillet.Checked == false) { MessageBox.Show("請選擇一種組裝方式"); return; } if (check001HasBillet.Checked == true && check001NoBillet.Checked == false) { if (label001.Text == "") { MessageBox.Show("請選擇一個零件當作胚料檔,或勾選無胚料檔"); return; } } } else if (SeleOperValue == "900") { } else { if (checkWHasBillet.Checked == false && checkWNoBillet.Checked == false) { MessageBox.Show("請選擇一種組裝方式"); return; } if (checkWHasBillet.Checked == true && checkWHasBillet.Checked == false) { if (labelW.Text == "") { MessageBox.Show("請選擇一個前段工序檔當作此工序零件檔,或勾選無前段工序檔"); return; } } } #endregion string Local_CAMPartFullPath = string.Format(@"{0}\{1}\{2}\{3}\{4}", CaxEnv.GetLocalTaskDir(), CurrentCusName, CurrentPartNo, CurrentCusVer, SelePartName); string Local_ModelPartFullPath = string.Format(@"{0}\{1}\{2}\{3}\{4}\{5}", CaxEnv.GetLocalTaskDir(), CurrentCusName, CurrentPartNo, CurrentCusVer, "MODEL", CurrentPartNo + ".prt"); string Local_ShareStrPartFullPath = string.Format(@"{0}\{1}\{2}\{3}", CaxEnv.GetLocalTaskDir(), CurrentCusName, CurrentPartNo, CurrentCusVer); //組件存在,直接開啟任務組立 BasePart newAsmPart; status = CaxPart.OpenBaseDisplay(Local_CAMPartFullPath, out newAsmPart); if (!status) { CaxLog.ShowListingWindow("組立開啟失敗!"); return; } //判斷組件是否曾經被開啟。如已被開啟過,則開啟檔案後離開;反之則塞上屬性(Title=IsOpend,Value=Y)並組裝客戶零件與胚料零件 string checkIsOpened = ""; try { checkIsOpened = newAsmPart.GetStringAttribute("IsOpened"); if (checkIsOpened == "Y") { CaxPart.Save(); this.Close(); return; } } catch (System.Exception ex) { newAsmPart.SetAttribute("IsOpened", "Y"); } NXOpen.Assemblies.Component newComponent = null; #region 組裝客戶檔案 string Local_NewModelPartFullPath = string.Format(@"{0}\{1}\{2}\{3}\{4}", CaxEnv.GetLocalTaskDir(), CurrentCusName, CurrentPartNo, CurrentCusVer, CurrentPartNo + ".prt"); //判斷是否已經有客戶檔案,如果沒有則複製過來 if (!System.IO.File.Exists(Local_NewModelPartFullPath)) { File.Copy(Local_ModelPartFullPath, Local_NewModelPartFullPath, true); } status = CaxAsm.AddComponentToAsmByDefault(Local_NewModelPartFullPath, out newComponent); if (!status) { CaxLog.ShowListingWindow("ERROR,組裝失敗!"); return; } #endregion CaxAsm.SetWorkComponent(null); #region 建立二階製程檔 string Local_CurrentOperPartFullPath = ""; if (groupBox001.Enabled == true) { if (check001NoBillet.Checked == true) { //選擇無胚料檔--新建檔案(檔名:料號+製程序) Local_CurrentOperPartFullPath = string.Format(@"{0}\{1}", Local_ShareStrPartFullPath, CurrentPartNo + "_TE_" + SeleOperValue + ".prt"); if (!System.IO.File.Exists(Local_CurrentOperPartFullPath)) { status = CaxAsm.CreateNewEmptyComp(Local_CurrentOperPartFullPath, out newComponent); if (!status) { CaxLog.ShowListingWindow("建立二階製程檔失敗"); return; } } } else { //選擇有胚料檔--組裝胚料檔(檔名:胚料檔原始名稱) Local_CurrentOperPartFullPath = string.Format(@"{0}\{1}", Local_ShareStrPartFullPath, label001.Text); if (!System.IO.File.Exists(Local_CurrentOperPartFullPath)) { status = CaxAsm.AddComponentToAsmByDefault(Local_CurrentOperPartFullPath, out newComponent); if (!status) { CaxLog.ShowListingWindow("001胚料檔組裝失敗"); return; } } } } else if (groupBox900.Enabled == true) { } else { if (checkWNoBillet.Checked == true) { //選擇無胚料檔--新建檔案(檔名:料號+製程序) Local_CurrentOperPartFullPath = string.Format(@"{0}\{1}", Local_ShareStrPartFullPath, CurrentPartNo + "_TE_" + SeleOperValue + ".prt"); if (!System.IO.File.Exists(Local_CurrentOperPartFullPath)) { status = CaxAsm.CreateNewEmptyComp(Local_CurrentOperPartFullPath, out newComponent); if (!status) { CaxLog.ShowListingWindow("建立二階製程檔失敗"); return; } } } else { //選擇有胚料檔--組裝胚料檔(檔名:胚料檔原始名稱) Local_CurrentOperPartFullPath = string.Format(@"{0}\{1}", Local_ShareStrPartFullPath, labelW.Text); if (!System.IO.File.Exists(Local_CurrentOperPartFullPath)) { status = CaxAsm.AddComponentToAsmByDefault(Local_CurrentOperPartFullPath, out newComponent); if (!status) { CaxLog.ShowListingWindow("W階胚料檔組裝失敗"); return; } } } } #endregion CaxPart.Save(); this.Close(); }
private void buttonOpenTask_Click(object sender, EventArgs e) { #region (註解)檢查是否有選擇組裝方式 //if (SeleOperValue == "001.prt") //{ // if (check001HasBillet.Checked == false && check001NoBillet.Checked == false) // { // MessageBox.Show("請選擇一種組裝方式"); // return; // } // if (check001HasBillet.Checked == true && check001NoBillet.Checked == false) // { // if (label001.Text == "") // { // MessageBox.Show("請選擇一個零件當作胚料檔,或勾選無胚料檔"); // return; // } // } //} //else if (SeleOperValue == "900.prt") //{ //} //else //{ // if (checkWHasBillet.Checked == false && checkWNoBillet.Checked == false) // { // MessageBox.Show("請選擇一種組裝方式"); // return; // } // if (checkWHasBillet.Checked == true && checkWNoBillet.Checked == false) // { // if (labelW.Text == "") // { // MessageBox.Show("請選擇一個前段工序檔當作此工序零件檔,或勾選無前段工序檔"); // return; // } // } //} #endregion if (SelePartName == "") { MessageBox.Show("請選擇欲開啟的零件!"); return; } string Local_OISPartFullPath = string.Format(@"{0}\{1}\{2}\{3}\{4}\{5}", CaxEnv.GetLocalTaskDir(), comboBoxCus.Text, comboBoxPartNo.Text, comboBoxCusVer.Text, comboBoxOpVer.Text, SelePartName); //string Local_ModelPartFullPath = string.Format(@"{0}\{1}\{2}\{3}\{4}\{5}\{6}", CaxEnv.GetLocalTaskDir(), // CurrentCusName, // CurrentPartNo, // CurrentCusVer, // CurrentOpVer, // "MODEL", // CurrentPartNo + ".prt"); //string Local_ShareStrPartFullPath = string.Format(@"{0}\{1}\{2}\{3}\{4}", CaxEnv.GetLocalTaskDir(), // CurrentCusName, // CurrentPartNo, // CurrentCusVer, // CurrentOpVer); BasePart newAsmPart; status = CaxPart.OpenBaseDisplay(Local_OISPartFullPath, out newAsmPart); if (!status) { CaxLog.ShowListingWindow("組立開啟失敗!"); return; } /* * if (check001HasBillet.Checked == true || check001NoBillet.Checked == true || * checkWHasBillet.Checked == true || checkWNoBillet.Checked == true) * { #region 組裝客戶檔案 * NXOpen.Assemblies.Component newComponent = null; * string Local_NewModelPartFullPath = string.Format(@"{0}\{1}\{2}\{3}\{4}\{5}", CaxEnv.GetLocalTaskDir(), * CurrentCusName, * CurrentPartNo, * CurrentCusVer, * CurrentOpVer, * CurrentPartNo + ".prt"); * //判斷是否已經有客戶檔案,如果沒有則複製過來 * if (!System.IO.File.Exists(Local_NewModelPartFullPath)) * { * File.Copy(Local_ModelPartFullPath, Local_NewModelPartFullPath, true); * } * * status = CaxAsm.AddComponentToAsmByDefault(Local_NewModelPartFullPath, out newComponent); * if (!status) * { * MessageBox.Show("客戶檔案組裝失敗!"); * this.Close(); * return; * } #endregion * * CaxAsm.SetWorkComponent(null); * #region 建立三階製程檔 * * string Local_CurrentOperPartFullPath = ""; * if (groupBox001.Enabled == true) * { #region 001 * //組立"胚料檔" * if (check001HasBillet.Checked == true & System.IO.File.Exists(label001BilletPath)) * { * //複製檔案到任務資料夾 * string tempBilletPath = label001BilletPath; * tempBilletPath = tempBilletPath.Replace(Path.GetDirectoryName(tempBilletPath), Path.GetDirectoryName(Local_NewModelPartFullPath)); * File.Copy(label001BilletPath, tempBilletPath, true); * * status = CaxAsm.AddComponentToAsmByDefault(tempBilletPath, out newComponent); * if (!status) * { * CaxLog.ShowListingWindow("001胚料檔組裝失敗"); * return; * } * } * * //組立"料號_ME_OISxxx" * Local_CurrentOperPartFullPath = string.Format(@"{0}\{1}", Local_ShareStrPartFullPath, CurrentPartNo + "_ME_" + SeleOperValue); * * if (!System.IO.File.Exists(Local_CurrentOperPartFullPath)) * { * status = CaxAsm.CreateNewEmptyComp(Local_CurrentOperPartFullPath, out newComponent); * if (!status) * { * CaxLog.ShowListingWindow("建立三階製程檔失敗"); * return; * } * } #endregion * } * else if (groupBox900.Enabled == true) * { * } * else * { #region W階 * //組立"前段製程檔" * if (checkWHasBillet.Checked == true & System.IO.File.Exists(labelWBilletPath)) * { * //複製檔案到任務資料夾 * string tempBilletPath = labelWBilletPath; * tempBilletPath = tempBilletPath.Replace(Path.GetDirectoryName(tempBilletPath), Path.GetDirectoryName(Local_NewModelPartFullPath)); * File.Copy(labelWBilletPath, tempBilletPath, true); * * status = CaxAsm.AddComponentToAsmByDefault(tempBilletPath, out newComponent); * if (!status) * { * CaxLog.ShowListingWindow("W階胚料檔組裝失敗"); * return; * } * } * * //組立"料號_ME_OISxxx" * Local_CurrentOperPartFullPath = string.Format(@"{0}\{1}", Local_ShareStrPartFullPath, CurrentPartNo + "_ME_" + SeleOperValue); * if (!System.IO.File.Exists(Local_CurrentOperPartFullPath)) * { * status = CaxAsm.CreateNewEmptyComp(Local_CurrentOperPartFullPath, out newComponent); * if (!status) * { * CaxLog.ShowListingWindow("建立三階製程檔失敗"); * return; * } * } #endregion * } * #endregion * } */ //組件存在,直接開啟任務組立 //BasePart newAsmPart; //status = CaxPart.OpenBaseDisplay(Local_OISPartFullPath, out newAsmPart); //if (!status) //{ // CaxLog.ShowListingWindow("組立開啟失敗!"); // return; //} //判斷組件是否曾經被開啟。如已被開啟過,則開啟檔案後離開;反之則塞上屬性(Title=IsOpend,Value=Y)並組裝客戶零件與胚料零件 //string checkIsOpened = ""; //try //{ // checkIsOpened = newAsmPart.GetStringAttribute("IsOpened"); // if (checkIsOpened == "Y") // { // CaxPart.Save(); // this.Close(); // return; // } //} //catch (System.Exception ex) //{ // newAsmPart.SetAttribute("IsOpened", "Y"); //} //NXOpen.Assemblies.Component newComponent = null; #region (註解中)組裝客戶檔案 //string Local_NewModelPartFullPath = string.Format(@"{0}\{1}\{2}\{3}\{4}", CaxEnv.GetLocalTaskDir(), // CurrentCusName, // CurrentPartNo, // CurrentCusVer, // CurrentPartNo + ".prt"); //判斷是否已經有客戶檔案,如果沒有則複製過來 //if (!System.IO.File.Exists(Local_NewModelPartFullPath)) //{ // File.Copy(Local_ModelPartFullPath, Local_NewModelPartFullPath, true); //} //status = CaxAsm.AddComponentToAsmByDefault(Local_NewModelPartFullPath, out newComponent); //if (!status) //{ // CaxLog.ShowListingWindow("ERROR,組裝失敗!"); // this.Close(); // return; //} #endregion //CaxAsm.SetWorkComponent(null); #region (註解中)建立三階製程檔 //string Local_CurrentOperPartFullPath = ""; //if (groupBox001.Enabled == true) //{ // #region 001 // //組立"胚料檔" // if (check001HasBillet.Checked == true & System.IO.File.Exists(label001BilletPath)) // { // //複製檔案到任務資料夾 // string tempBilletPath = label001BilletPath; // tempBilletPath = tempBilletPath.Replace(Path.GetDirectoryName(tempBilletPath), Path.GetDirectoryName(Local_NewModelPartFullPath)); // File.Copy(label001BilletPath, tempBilletPath, true); // status = CaxAsm.AddComponentToAsmByDefault(tempBilletPath, out newComponent); // if (!status) // { // CaxLog.ShowListingWindow("001胚料檔組裝失敗"); // return; // } // } // //組立"料號_ME_OISxxx" // Local_CurrentOperPartFullPath = string.Format(@"{0}\{1}", Local_ShareStrPartFullPath, CurrentPartNo + "_ME_" + SeleOperValue); // if (!System.IO.File.Exists(Local_CurrentOperPartFullPath)) // { // status = CaxAsm.CreateNewEmptyComp(Local_CurrentOperPartFullPath, out newComponent); // if (!status) // { // CaxLog.ShowListingWindow("建立三階製程檔失敗"); // return; // } // } // #endregion //} //else if (groupBox900.Enabled == true) //{ //} //else //{ // #region W階 // //組立"前段製程檔" // if (checkWHasBillet.Checked == true & System.IO.File.Exists(labelWBilletPath)) // { // //複製檔案到任務資料夾 // string tempBilletPath = labelWBilletPath; // tempBilletPath = tempBilletPath.Replace(Path.GetDirectoryName(tempBilletPath), Path.GetDirectoryName(Local_NewModelPartFullPath)); // File.Copy(labelWBilletPath, tempBilletPath, true); // status = CaxAsm.AddComponentToAsmByDefault(tempBilletPath, out newComponent); // if (!status) // { // CaxLog.ShowListingWindow("W階胚料檔組裝失敗"); // return; // } // } // //組立"料號_ME_OISxxx" // Local_CurrentOperPartFullPath = string.Format(@"{0}\{1}", Local_ShareStrPartFullPath, CurrentPartNo + "_ME_" + SeleOperValue); // if (!System.IO.File.Exists(Local_CurrentOperPartFullPath)) // { // status = CaxAsm.CreateNewEmptyComp(Local_CurrentOperPartFullPath, out newComponent); // if (!status) // { // CaxLog.ShowListingWindow("建立三階製程檔失敗"); // return; // } // } // #endregion //} #endregion CaxPart.Save(); this.Close(); }
private void OK_Click(object sender, EventArgs e) { //先關閉所有檔案 CaxPart.CloseAllParts(); try { if (Is_OldPart == true) { //定義總組立檔案、二階檔案、三階檔案名稱 string AsmCompFileFullPath = string.Format(@"{0}\{1}\{2}\{3}\{4}\{5}", CaxEnv.GetGlobaltekEnvDir(), "Task", comboBoxOldCusName.Text, comboBoxOldPartNo.Text, comboBoxOldCusRev.Text.ToUpper(), comboBoxOldPartNo.Text + "_MOT.prt"); string SecondFileFullPath = string.Format(@"{0}\{1}\{2}\{3}\{4}\{5}", CaxEnv.GetGlobaltekEnvDir(), "Task", comboBoxOldCusName.Text, comboBoxOldPartNo.Text, comboBoxOldCusRev.Text.ToUpper(), comboBoxOldPartNo.Text + "_OP" + "[Oper1]" + ".prt"); string ThirdFileFullPath_OIS = string.Format(@"{0}\{1}\{2}\{3}\{4}\{5}", CaxEnv.GetGlobaltekEnvDir(), "Task", comboBoxOldCusName.Text, comboBoxOldPartNo.Text, comboBoxOldCusRev.Text.ToUpper(), comboBoxOldPartNo.Text + "_OIS" + "[Oper1]" + ".prt"); string ThirdFileFullPath_CAM = string.Format(@"{0}\{1}\{2}\{3}\{4}\{5}", CaxEnv.GetGlobaltekEnvDir(), "Task", comboBoxOldCusName.Text, comboBoxOldPartNo.Text, comboBoxOldCusRev.Text.ToUpper(), comboBoxOldPartNo.Text + "_OP" + "[Oper1]" + "_CAM.prt"); string OPFolderPath = string.Format(@"{0}\{1}\{2}\{3}\{4}\{5}", CaxEnv.GetGlobaltekEnvDir(), "Task", comboBoxOldCusName.Text, comboBoxOldPartNo.Text, comboBoxOldCusRev.Text.ToUpper(), "OP" + "[Oper1]"); string tempSecondFileFullPath = SecondFileFullPath; string tempThirdFileFullPath_OIS = ThirdFileFullPath_OIS; string tempThirdFileFullPath_CAM = ThirdFileFullPath_CAM; string tempOPFolderPath = OPFolderPath; #region 開啟總組立 if (File.Exists(AsmCompFileFullPath)) { //組件存在,直接開啟任務組立 BasePart newAsmPart; status = CaxPart.OpenBaseDisplay(AsmCompFileFullPath, out newAsmPart); if (!status) { CaxLog.ShowListingWindow("組立開啟失敗,料號不可有中文字!"); return; } } else { CaxLog.ShowListingWindow("開啟失敗:找不到總組立" + Path.GetFileNameWithoutExtension(AsmCompFileFullPath)); return; } #endregion #region 建立新插入的製程 NXOpen.Assemblies.Component tempComp; foreach (string i in ListAddOper) { //設定一階為WorkComp CaxAsm.SetWorkComponent(null); //建立二階檔案 SecondFileFullPath = tempSecondFileFullPath; SecondFileFullPath = SecondFileFullPath.Replace("[Oper1]", i); status = CaxAsm.CreateNewEmptyComp(SecondFileFullPath, out tempComp); if (!status) { CaxLog.ShowListingWindow("建立二階製程檔失敗"); return; } //取得二階所有comp List <NXOpen.Assemblies.Component> ChildenComp = new List <NXOpen.Assemblies.Component>(); CaxAsm.GetCompChildren(out ChildenComp); foreach (NXOpen.Assemblies.Component ii in ChildenComp) { if (ii.Name == Path.GetFileNameWithoutExtension(SecondFileFullPath).ToUpper()) { CaxAsm.SetWorkComponent(ii); } } //建立三階檔案 ThirdFileFullPath_OIS = tempThirdFileFullPath_OIS; ThirdFileFullPath_CAM = tempThirdFileFullPath_CAM; ThirdFileFullPath_OIS = ThirdFileFullPath_OIS.Replace("[Oper1]", i); ThirdFileFullPath_CAM = ThirdFileFullPath_CAM.Replace("[Oper1]", i); status = CaxAsm.CreateNewEmptyComp(ThirdFileFullPath_OIS, out tempComp); if (!status) { CaxLog.ShowListingWindow("建立三階OIS檔失敗"); return; } status = CaxAsm.CreateNewEmptyComp(ThirdFileFullPath_CAM, out tempComp); if (!status) { CaxLog.ShowListingWindow("建立三階CAM檔失敗"); return; } } #endregion #region 建立新插入的製程資料夾 foreach (string i in ListAddOper) { OPFolderPath = tempOPFolderPath; OPFolderPath = OPFolderPath.Replace("[Oper1]", i); string OISFolderPath = string.Format(@"{0}\{1}", OPFolderPath, "OIS"); string CAMFolderPath = string.Format(@"{0}\{1}", OPFolderPath, "CAM"); if (!File.Exists(OISFolderPath)) { try { System.IO.Directory.CreateDirectory(OISFolderPath); } catch (System.Exception ex) { MessageBox.Show(ex.ToString()); return; } } if (!File.Exists(CAMFolderPath)) { try { System.IO.Directory.CreateDirectory(CAMFolderPath); } catch (System.Exception ex) { MessageBox.Show(ex.ToString()); return; } } } #endregion #region 將值儲存起來 cPECreateData.CusName = comboBoxOldCusName.Text; cPECreateData.PartNo = comboBoxOldPartNo.Text; cPECreateData.CusRev = comboBoxOldCusRev.Text.ToUpper(); cPECreateData.ListOperation = new List <Operation>(); Operation cOperation = new Operation(); cPECreateData.Oper1Ary = new List <string>(); cPECreateData.Oper2Ary = new List <string>(); for (int i = 0; i < panel.Rows.Count; i++) { if (panel.Rows.Count == 0) { MessageBox.Show("尚未選擇製程序與製程別!"); return; } if (panel.GetCell(i, 1).Value.ToString() == "") { MessageBox.Show("製程序" + panel.GetCell(i, 0).Value + "尚未選取製程別!"); return; } cOperation = new Operation(); cOperation.Oper1 = panel.GetCell(i, 0).Value.ToString(); cOperation.Oper2 = panel.GetCell(i, 1).Value.ToString(); cPECreateData.ListOperation.Add(cOperation); cPECreateData.Oper1Ary.Add(panel.GetCell(i, 0).Value.ToString()); cPECreateData.Oper2Ary.Add(panel.GetCell(i, 1).Value.ToString()); } #endregion #region 寫出PECreateData.dat string PECreateDataJsonDat = string.Format(@"{0}\{1}\{2}\{3}\{4}\{5}", CaxEnv.GetGlobaltekTaskDir(), CurrentOldCusName, CurrentOldPartNo, CurrentOldCusRev, "MODEL", "PECreateData.dat"); status = CaxFile.WriteJsonFileData(PECreateDataJsonDat, cPECreateData); if (!status) { MessageBox.Show("PECreateData.dat 輸出失敗..."); return; } #endregion } else { #region 取得客戶名稱 CusName = comboBoxCusName.Text; if (CusName == "") { MessageBox.Show("尚未填寫客戶!"); return; } #endregion #region 取得料號 PartNo = textPartNo.Text; if (PartNo == "") { MessageBox.Show("尚未填寫料號!"); return; } #endregion #region 取得客戶版次 CusRev = textCusRev.Text; if (CusRev == "") { MessageBox.Show("尚未填寫客戶版次!"); return; } #endregion #region 取得檔案路徑 if (PartPath == "-1") { MessageBox.Show("尚未選擇客戶檔案!"); return; } #endregion #region 定義根目錄 //定義MODEL資料夾路徑 string ModelFolderFullPath = string.Format(@"{0}\{1}\{2}\{3}\{4}\{5}", CaxEnv.GetGlobaltekEnvDir(), "Task", CusName, PartNo, CusRev.ToUpper(), "MODEL"); //定義總組立檔案名稱 string AsmCompFileFullPath = string.Format(@"{0}\{1}\{2}\{3}\{4}\{5}", CaxEnv.GetGlobaltekEnvDir(), "Task", CusName, PartNo, CusRev.ToUpper(), PartNo + "_MOT.prt"); //定義CAM資料夾路徑、OIS資料夾路徑、三階檔案路徑 string CAMFolderPath = "", OISFolderPath = "", ThridOperPartPath = ""; #endregion #region 建立MODEL資料夾 if (!File.Exists(ModelFolderFullPath)) { try { System.IO.Directory.CreateDirectory(ModelFolderFullPath); } catch (System.Exception ex) { MessageBox.Show(ex.ToString()); return; } } #endregion #region 複製客戶檔案到MODEL資料夾內 //判斷客戶的檔案是否存在 status = System.IO.File.Exists(PartPath); if (!status) { MessageBox.Show("指定的檔案不存在,請再次確認"); return; } //建立MODEL資料夾內客戶檔案路徑 string CustomerPartFullPath = string.Format(@"{0}\{1}", ModelFolderFullPath, PartNo + ".prt"); //開始複製 if (!System.IO.File.Exists(CustomerPartFullPath)) { File.Copy(PartPath, CustomerPartFullPath, true); } #endregion #region 將值儲存起來 cPECreateData.CusName = CusName; cPECreateData.PartNo = PartNo; cPECreateData.CusRev = CusRev.ToUpper(); //cPE_OutPutDat.PartPath = PartPath; cPECreateData.ListOperation = new List <Operation>(); Operation cOperation = new Operation(); cPECreateData.Oper1Ary = new List <string>(); cPECreateData.Oper2Ary = new List <string>(); for (int i = 0; i < panel.Rows.Count; i++) { if (panel.Rows.Count == 0) { MessageBox.Show("尚未選擇製程序與製程別!"); return; } if (panel.GetCell(i, 1).Value.ToString() == "") { MessageBox.Show("製程序" + panel.GetCell(i, 0).Value + "尚未選取製程別!"); return; } cOperation = new Operation(); cOperation.Oper1 = panel.GetCell(i, 0).Value.ToString(); cOperation.Oper2 = panel.GetCell(i, 1).Value.ToString(); //建立CAM資料夾路徑 CAMFolderPath = string.Format(@"{0}\{1}\{2}", Path.GetDirectoryName(AsmCompFileFullPath), "OP" + panel.GetCell(i, 0).Value.ToString(), "CAM"); //儲存CAM資料夾路徑 //cOperation.CAMFolderPath = CAMFolderPath; //建立CAM資料夾 if (!File.Exists(CAMFolderPath)) { try { System.IO.Directory.CreateDirectory(CAMFolderPath); } catch (System.Exception ex) { MessageBox.Show(ex.ToString()); return; } } //建立OIS資料夾路徑 OISFolderPath = string.Format(@"{0}\{1}\{2}", Path.GetDirectoryName(AsmCompFileFullPath), "OP" + panel.GetCell(i, 0).Value.ToString(), "OIS"); //儲存OIS資料夾路徑 //cOperation.OISFolderPath = OISFolderPath; //建立OIS資料夾 if (!File.Exists(OISFolderPath)) { try { System.IO.Directory.CreateDirectory(OISFolderPath); } catch (System.Exception ex) { MessageBox.Show(ex.ToString()); return; } } //建立三階檔案路徑 ThridOperPartPath = Path.GetDirectoryName(AsmCompFileFullPath); cPECreateData.ListOperation.Add(cOperation); cPECreateData.Oper1Ary.Add(panel.GetCell(i, 0).Value.ToString()); cPECreateData.Oper2Ary.Add(panel.GetCell(i, 1).Value.ToString()); } #endregion #region (註解中)複製MODEL內的客戶檔案到料號資料夾內,並更名XXX_MOT.prt /* * //判斷要複製的檔案是否存在 * status = System.IO.File.Exists(destFileName_Model); * if (!status) * { * MessageBox.Show("指定的檔案不存在,請再次確認"); * return; * } * * //建立目的地(客戶版次)檔案全路徑 * string destFileName_CusRev = string.Format(@"{0}\{1}\{2}\{3}", CaxEnv.GetGlobalTekEnvDir(), PartNo, CusRev.ToUpper(), PartNo + "_MOT.prt"); * * //開始複製 * File.Copy(destFileName_Model, destFileName_CusRev, true); */ #endregion #region 自動建立總組立檔案架構,並組立相關製程 status = CaxAsm.CreateNewAsm(AsmCompFileFullPath); if (!status) { CaxLog.ShowListingWindow("建立一階總組立檔失敗"); return; } CaxPart.Save(); string OPCompName = ""; NXOpen.Assemblies.Component tempComp; //List<double> ListOperDouble = new List<double>(); //for (int i = 0; i < cPE_OutPutDat.ListOperation.Count; i++) //{ // ListOperDouble.Add(Convert.ToDouble(cPE_OutPutDat.ListOperation[i].Oper1)); //} //ListOperDouble.Sort(); for (int i = 0; i < cPECreateData.ListOperation.Count; i++) { //設定一階為WorkComp CaxAsm.SetWorkComponent(null); //建立二階製程檔 OPCompName = string.Format(@"{0}\{1}", Path.GetDirectoryName(AsmCompFileFullPath), PartNo + "_OP" + cPECreateData.ListOperation[i].Oper1 + ".prt"); status = CaxAsm.CreateNewEmptyComp(OPCompName, out tempComp); if (!status) { CaxLog.ShowListingWindow("建立二階製程檔失敗"); return; } } string OISCompFullPath = "", CAMCompFullPath = ""; //取得二階所有comp List <NXOpen.Assemblies.Component> ChildenComp = new List <NXOpen.Assemblies.Component>(); CaxAsm.GetCompChildren(out ChildenComp); for (int i = 0; i < ChildenComp.Count; i++) { CaxAsm.SetWorkComponent(ChildenComp[i]); string OperStr = ChildenComp[i].Name.Split(new string[] { "OP" }, StringSplitOptions.RemoveEmptyEntries)[1]; #region 建立三階CAM檔 //建立三階CAM檔 CAMCompFullPath = string.Format(@"{0}\{1}", Path.GetDirectoryName(AsmCompFileFullPath), PartNo + "_OP" + OperStr + "_CAM.prt"); status = CaxAsm.CreateNewEmptyComp(CAMCompFullPath, out tempComp); if (!status) { CaxLog.ShowListingWindow("建立三階CAM檔失敗"); return; } #endregion #region 建立三階OIS檔 //先複製drafting_template.prt到OIS檔 string drafting_template_Path = string.Format(@"{0}\{1}", CaxEnv.GetGlobaltekEnvDir(), "drafting_template.prt"); OISCompFullPath = string.Format(@"{0}\{1}", Path.GetDirectoryName(AsmCompFileFullPath), PartNo + "_OIS" + OperStr + ".prt"); if (!File.Exists(drafting_template_Path)) { CaxLog.ShowListingWindow("drafting_template.prt遺失,請聯繫開發工程師"); return; } System.IO.File.Copy(drafting_template_Path, OISCompFullPath, true); //組立三階OIS檔 //status = CaxAsm.CreateNewEmptyComp(OISCompFullPath, out tempComp); status = CaxAsm.AddComponentToAsmByDefault(OISCompFullPath, out tempComp); if (!status) { CaxLog.ShowListingWindow("組立三階OIS檔失敗"); return; } #endregion } #endregion #region 寫出PECreateData.dat string PECreateDataJsonDat = string.Format(@"{0}\{1}", ModelFolderFullPath, "PECreateData.dat"); status = CaxFile.WriteJsonFileData(PECreateDataJsonDat, cPECreateData); if (!status) { MessageBox.Show("PECreateData.dat 輸出失敗..."); return; } #endregion #region (註解中)寫出METEDownloadData.dat //string METEDownloadData = string.Format(@"{0}\{1}", CaxEnv.GetGlobaltekTaskDir(), "METEDownloadData.dat"); //METEDownloadData cMETEDownloadData = new METEDownloadData(); //if (File.Exists(METEDownloadData)) //{ // #region METEDownloadData.dat檔案存在 // status = CaxPublic.ReadMETEDownloadData(METEDownloadData, out cMETEDownloadData); // if (!status) // { // MessageBox.Show("METEDownloadData.dat讀取失敗..."); // return; // } // int CusCount = 0, IndexOfCusName = -1; // for (int i = 0; i < cMETEDownloadData.EntirePartAry.Count; i++) // { // if (CusName != cMETEDownloadData.EntirePartAry[i].CusName) // { // CusCount++; // } // else // { // IndexOfCusName = i; // break; // } // } // //新的客戶且已經有METEDownloadDat.dat // if (CusCount == cMETEDownloadData.EntirePartAry.Count) // { // EntirePartAry cEntirePartAry = new EntirePartAry(); // cEntirePartAry.CusName = CusName; // cEntirePartAry.CusPart = new List<CusPart>(); // CusPart cCusPart = new CusPart(); // cCusPart.PartNo = PartNo; // cCusPart.CusRev = new List<CusRev>(); // CusRev cCusRev = new CusRev(); // cCusRev.RevNo = CusRev.ToUpper(); // cCusRev.OperAry1 = new List<string>(); // cCusRev.OperAry2 = new List<string>(); // cCusRev.OperAry1 = cPECreateData.Oper1Ary; // cCusRev.OperAry2 = cPECreateData.Oper2Ary; // cCusPart.CusRev.Add(cCusRev); // cEntirePartAry.CusPart.Add(cCusPart); // cMETEDownloadData.EntirePartAry.Add(cEntirePartAry); // } // //舊的客戶新增料號 // else // { // //判斷料號是否已存在 // int PartCount = 0; int IndexOfPartNo = -1; // for (int i = 0; i < cMETEDownloadData.EntirePartAry[IndexOfCusName].CusPart.Count; i++) // { // if (PartNo != cMETEDownloadData.EntirePartAry[IndexOfCusName].CusPart[i].PartNo) // { // PartCount++; // } // else // { // IndexOfPartNo = i; // break; // } // } // //舊的客戶且新的料號 PartCount == CusPart.Count 表示新的料號 // if (PartCount == cMETEDownloadData.EntirePartAry[IndexOfCusName].CusPart.Count) // { // CusPart cCusPart = new CusPart(); // cCusPart.PartNo = PartNo; // cCusPart.CusRev = new List<CusRev>(); // CusRev cCusRev = new CusRev(); // cCusRev.RevNo = CusRev.ToUpper(); // cCusRev.OperAry1 = new List<string>(); // cCusRev.OperAry2 = new List<string>(); // cCusRev.OperAry1 = cPECreateData.Oper1Ary; // cCusRev.OperAry2 = cPECreateData.Oper2Ary; // cCusPart.CusRev.Add(cCusRev); // cMETEDownloadData.EntirePartAry[IndexOfCusName].CusPart.Add(cCusPart); // } // //舊的客戶且舊的料號新增客戶版次 // else // { // CusRev cCusRev = new CusRev(); // cCusRev.RevNo = CusRev.ToUpper(); // cCusRev.OperAry1 = new List<string>(); // cCusRev.OperAry1 = cPECreateData.Oper1Ary; // cMETEDownloadData.EntirePartAry[IndexOfCusName].CusPart[IndexOfPartNo].CusRev.Add(cCusRev); // } // } // /* // int PartCount = 0; int IndexOfPartNo = -1; // for (int i = 0; i < cMETEDownloadData.EntirePartAry.Count; i++) // { // if (PartNo != cMETEDownloadData.EntirePartAry[i].PartNo) // { // PartCount++; // } // else // { // IndexOfPartNo = i; // break; // } // } // //新的料號且已經有METEDownloadDat.dat // if (PartCount == cMETEDownloadData.EntirePartAry.Count) // { // EntirePartAry cEntirePartAry = new EntirePartAry(); // cEntirePartAry.CusRev = new List<CusRev>(); // CusRev cCusRev = new CusRev(); // cCusRev.OperAry1 = new List<string>(); // cCusRev.RevNo = CusRev.ToUpper(); // cCusRev.OperAry1 = cPE_OutPutDat.Oper1Ary; // cEntirePartAry.CusName = CusName; // cEntirePartAry.PartNo = PartNo; // cEntirePartAry.CusRev.Add(cCusRev); // cMETEDownloadData.EntirePartAry.Add(cEntirePartAry); // } // //舊的料號新增客戶版次 // else // { // CusRev cCusRev = new CusRev(); // cCusRev.OperAry1 = new List<string>(); // cCusRev.RevNo = CusRev.ToUpper(); // cCusRev.OperAry1 = cPE_OutPutDat.Oper1Ary; // cMETEDownloadData.EntirePartAry[IndexOfPartNo].CusRev.Add(cCusRev); // } // */ // #endregion //} //else //{ // #region METEDownloadData.dat檔案不存在 // cMETEDownloadData.EntirePartAry = new List<EntirePartAry>(); // EntirePartAry cEntirePartAry = new EntirePartAry(); // cEntirePartAry.CusName = CusName; // cEntirePartAry.CusPart = new List<CusPart>(); // CusPart cCusPart = new CusPart(); // cCusPart.PartNo = PartNo; // cCusPart.CusRev = new List<CusRev>(); // CusRev cCusRev = new CusRev(); // cCusRev.RevNo = CusRev.ToUpper(); // cCusRev.OperAry1 = new List<string>(); // cCusRev.OperAry2 = new List<string>(); // cCusRev.OperAry1 = cPECreateData.Oper1Ary; // cCusRev.OperAry2 = cPECreateData.Oper2Ary; // cCusPart.CusRev.Add(cCusRev); // cEntirePartAry.CusPart.Add(cCusPart); // cMETEDownloadData.EntirePartAry.Add(cEntirePartAry); // #endregion //} //status = CaxFile.WriteJsonFileData(METEDownloadData, cMETEDownloadData); //if (!status) //{ // MessageBox.Show("METEDownloadData.dat輸出失敗..."); // return; //} #endregion } CaxAsm.SetWorkComponent(null); CaxPart.Save(); this.DialogResult = DialogResult.OK; this.Close(); } catch (System.Exception ex) { CaxLog.ShowListingWindow(ex.ToString()); } }