/// <summary>
/// 获取功放输出功率、频率，频谱分析的场强值，并应用补偿数据
/// 处理数据，并更新界面
/// </summary>
private void SweepProcesing2()
{
float tx_out = 0.0f;
float rx_value = 0.0f;
Auto_CAL_Items Cal_Carrier;
//获取功放状态、分析数据、异常信息
SweepObj.CloneReference(ref ps1, ref ps2, ref sr, ref rfr_errors1, ref rfr_errors2);
//处理扫频
if (sweep_or_time == SweepType.Freq_Sweep)
{
//功放1扫频
if (rf_involved == RFInvolved.Rf_1)
{
sweep_points[0].X = ps1.Status2.Freq;
Cal_Carrier = RL0_Tables.Cal_Carrier(FuncModule.ISO, RFInvolved.Rf_1);
cal_item = Cal_Carrier.GetItem(ps1.Status2.Freq);
if (App_Configure.Cnfgs.Cal_Use_Table)
{
tx_out = ps1.Status2.OutP + Tx_Tables.iso_tx1_disp.Offset(ps1.Status2.Freq, ps1.Status2.OutP, Tx_Tables.har_offset1_disp);
rx_value = sr.dBmValue + Rx_Tables.Offset(ps1.Status2.Freq, FuncModule.ISO);
}
else
{
tx_out = (float)App_Factors.iso_tx1_disp.ValueWithOffset(ps1.Status2.Freq, ps1.Status2.OutP);
rx_value = (float)App_Factors.iso_rx1.ValueWithOffset(ps1.Status2.Freq, sr.dBmValue);
}
sweep_points[0].Y = (tx_out - rx_value) -
(cal_item.Tx0 - cal_item.Rx0) + cal_item.RL0; // -this.settings.Offset;
lblF.Text = "F:" + sweep_points[0].X.ToString("0.0") + "MHz";
lblTx.Text = "Tx:" + tx_out.ToString("0.0") + "dBm";
//功放2扫频
}
else
{
sweep_points[0].X = ps2.Status2.Freq;
Cal_Carrier = RL0_Tables.Cal_Carrier(FuncModule.ISO, RFInvolved.Rf_2);
cal_item = Cal_Carrier.GetItem(ps2.Status2.Freq);
if (App_Configure.Cnfgs.Cal_Use_Table)
{
tx_out = ps2.Status2.OutP + Tx_Tables.iso_tx2_disp.Offset(ps2.Status2.Freq, ps2.Status2.OutP, Tx_Tables.iso_offset2_disp);
rx_value = sr.dBmValue + Rx_Tables.Offset(ps2.Status2.Freq, FuncModule.ISO);
}
else
{
tx_out = (float)App_Factors.iso_tx2_disp.ValueWithOffset(ps2.Status2.Freq, ps2.Status2.OutP);
rx_value = (float)App_Factors.iso_rx2.ValueWithOffset(ps2.Status2.Freq, sr.dBmValue);
}
sweep_points[0].Y = (tx_out - rx_value) -
(cal_item.Tx0 - cal_item.Rx0) + cal_item.RL0; //- this.settings.Offset;
lblF.Text = "F:" + sweep_points[0].X.ToString("0.0") + "MHz";
lblTx.Text = "Tx:" + tx_out.ToString("0.0") + "dBm";
}
lblRx.Text = "Rx:" + sr.dBmValue.ToString("0.0") + "dBm";
lblNoise.Text = "Noise:" + sr.dBmNosie.ToString("0.0") + "dBm";
pltIso.Add(sweep_points, 0, PointsDone);
//处理扫时
}
else
{
sweep_points[0].X = PointsDone;
//功放1扫时
if (rf_involved == RFInvolved.Rf_1)
{
Cal_Carrier = RL0_Tables.Cal_Carrier(FuncModule.ISO, RFInvolved.Rf_1);
cal_item = Cal_Carrier.GetItem(ps1.Status2.Freq);
if (App_Configure.Cnfgs.Cal_Use_Table)
{
tx_out = ps1.Status2.OutP + Tx_Tables.iso_tx1_disp.Offset(ps1.Status2.Freq, ps1.Status2.OutP, Tx_Tables.iso_offset1_disp);
rx_value = sr.dBmValue + Rx_Tables.Offset(ps1.Status2.Freq, FuncModule.ISO);
}
else
{
tx_out = (float)App_Factors.iso_tx1_disp.ValueWithOffset(ps1.Status2.Freq, ps1.Status2.OutP);
rx_value = (float)App_Factors.iso_rx1.ValueWithOffset(ps1.Status2.Freq, sr.dBmValue);
}
sweep_points[0].Y = (tx_out - rx_value) -
(cal_item.Tx0 - cal_item.Rx0) + cal_item.RL0; //- this.settings.Offset;
lblF.Text = "F:" + ps1.Status2.Freq.ToString("0.0") + "MHz";
lblTx.Text = "Tx:" + tx_out.ToString("0.0") + "dBm";
//功放2扫时
}
else
{
Cal_Carrier = RL0_Tables.Cal_Carrier(FuncModule.ISO, RFInvolved.Rf_2);
cal_item = Cal_Carrier.GetItem(ps2.Status2.Freq);
if (App_Configure.Cnfgs.Cal_Use_Table)
{
tx_out = ps2.Status2.OutP + Tx_Tables.iso_tx2_disp.Offset(ps2.Status2.Freq, ps2.Status2.OutP, Tx_Tables.iso_offset2_disp);
rx_value = sr.dBmValue + Rx_Tables.Offset(ps2.Status2.Freq, FuncModule.ISO);
}
else
{
tx_out = (float)App_Factors.iso_tx2_disp.ValueWithOffset(ps2.Status2.Freq, ps2.Status2.OutP);
rx_value = (float)App_Factors.iso_rx2.ValueWithOffset(ps2.Status2.Freq, sr.dBmValue);
}
sweep_points[0].Y = (tx_out - rx_value) -
(cal_item.Tx0 - cal_item.Rx0) + cal_item.RL0; //- this.settings.Offset;
lblF.Text = "F:" + ps2.Status2.Freq.ToString("0.0") + "MHz";
lblTx.Text = "Tx:" + tx_out.ToString("0.0") + "dBm";
}
lblRx.Text = "Rx:" + rx_value.ToString("0.0") + "dBm";
lblNoise.Text = "Noise:" + sr.dBmNosie.ToString("0.0") + "dBm";
pltIso.Add(sweep_points, 0, PointsDone);
}
}
protected override void WndProc(ref Message m)
{
switch (m.Msg)
{
//完成一趟操作
case MessageID.ISO_SWEEP_DONE:
{
Sweeping = false;
//if (bErrorRf)
//{
// SweepObj.CloneReference(ref ps1, ref ps2, ref sr, ref rfr_errors1, ref rfr_errors2);
// bCalsuccess = false;
// MessageBox.Show(rfr_errors1.ToString() + "\n\r" + rfr_errors2.ToString());
//}
//if (bErrorSpec)
//{
// bCalsuccess = false;
// MessageBox.Show("SPECTRUM_Error");
//}
if (bErrorRf == true || bErrorSpec == true)
{
bCalsuccess = false;
MessageBox.Show(this, "Automatic calibration failed, please check the external attenuator!");
this.DialogResult = DialogResult.Cancel;
}
else
{
this.DialogResult = DialogResult.OK;
}
break;
}
//完成单点扫描
case MessageID.ISO_SUCCED:
{
float tx_out, rx_value;
Auto_CAL_Items Cal_Carrier;
SweepObj.CloneReference(ref ps1, ref ps2, ref sr, ref rfr_errors1, ref rfr_errors2);
if (rf_involved == RFInvolved.Rf_1)
{
if (App_Configure.Cnfgs.Cal_Use_Table)
{
tx_out = ps1.Status2.OutP + Tx_Tables.iso_tx1_disp.Offset(ps1.Status2.Freq, ps1.Status2.OutP, Tx_Tables.iso_offset1_disp);
rx_value = sr.dBmValue + Rx_Tables.Offset(ps1.Status2.Freq, FuncModule.ISO);
}
else
{
tx_out = (float)App_Factors.iso_tx1_disp.ValueWithOffset(ps1.Status2.Freq, ps1.Status2.OutP);
rx_value = (float)App_Factors.iso_rx1.ValueWithOffset(ps1.Status2.Freq, sr.dBmValue);
}
Cal_Carrier = RL0_Tables.Cal_Carrier(FuncModule.ISO, RFInvolved.Rf_1);
Cal_Carrier.GetItem(PointsDone).Tx0 = tx_out;
Cal_Carrier.GetItem(PointsDone).Rx0 = rx_value;
}
else
{
if (App_Configure.Cnfgs.Cal_Use_Table)
{
tx_out = ps2.Status2.OutP + Tx_Tables.iso_tx2_disp.Offset(ps2.Status2.Freq, ps2.Status2.OutP, Tx_Tables.iso_offset2_disp);
rx_value = sr.dBmValue + Rx_Tables.Offset(ps2.Status2.Freq, FuncModule.ISO);
}
else
{
tx_out = (float)App_Factors.iso_tx2_disp.ValueWithOffset(ps2.Status2.Freq, ps2.Status2.OutP);
rx_value = (float)App_Factors.iso_rx2.ValueWithOffset(ps2.Status2.Freq, sr.dBmValue);
}
Cal_Carrier = RL0_Tables.Cal_Carrier(FuncModule.ISO, RFInvolved.Rf_2);
Cal_Carrier.GetItem(PointsDone).Tx0 = tx_out;
Cal_Carrier.GetItem(PointsDone).Rx0 = rx_value;
}
PointsDone++;
pbrCAL.Value = PointsDone;
break;
}
//功放操作错误
case MessageID.RF_ERROR:
{
bErrorRf = true;
break;
}
//频谱分析错误
case MessageID.SPECTRUM_ERROR:
{
bErrorSpec = true;
break;
}
//频谱分析成功
case MessageID.SPECTRUEME_SUCCED:
{
SweepObj.Spectrum_Succed();
break;
}
//功放操作成功
case MessageID.RF_SUCCED_ALL:
{
if (m.WParam.ToInt32() == App_Configure.Cnfgs.ComAddr1)
{
SweepObj.Power1_Succed();
}
else if (m.WParam.ToInt32() == App_Configure.Cnfgs.ComAddr2)
{
SweepObj.Power2_Succed();
}
break;
}
default:
{
base.WndProc(ref m);
break;
}
}
}