/// <summary>
/// 問題を設定する
/// </summary>
/// <returns></returns>
private bool setNewProblem()
{
bool success = false;
try
{
if( ProbNo == 0 )
{
CMesher2D mesh2d = null;
using(CCadObj2D cad2d = new CCadObj2D())
{
IList<CVector2D> pts = new List<CVector2D>();
pts.Add( new CVector2D(0.0,0.0) );
pts.Add( new CVector2D(1.0,0.0) );
pts.Add( new CVector2D(1.0,0.2) );
pts.Add( new CVector2D(0.5,0.2) );
pts.Add( new CVector2D(0.5,0.8) );
pts.Add( new CVector2D(1.0,0.8) );
pts.Add( new CVector2D(1.0,1.0) );
pts.Add( new CVector2D(0.0,1.0) );
cad2d.AddPolygon( pts );
cad2d.ConnectVertex_Line(6,3);
mesh2d = new CMesher2D(cad2d,0.05);
////
using(CMesher2D msh_tmp = (CMesher2D)mesh2d.Clone())
{
mesh2d.Clear();
mesh2d.Dispose();
mesh2d = (CMesher2D)msh_tmp.Clone();
}
}
using(CSerializer fout = new CSerializer("hoge.txt", false))
{
// write file
mesh2d.Serialize(fout);
}
using(CSerializer fin = new CSerializer("hoge.txt", true))
{ // load file
mesh2d.Serialize(fin);
}
////
DrawerAry.Clear();
DrawerAry.PushBack( new CDrawerMsh2D(mesh2d) );
DrawerAry.InitTrans( Camera );
mesh2d.Clear();
mesh2d.Dispose();
}
else if( ProbNo == 1 )
{
string mshfn = "../../../input_file/hexa_tri.msh";
if (File.Exists(mshfn))
{
using(CMesher2D mesh2d = new CMesher2D())
{
mesh2d.ReadFromFile_GiDMsh(mshfn);
using(CSerializer fout = new CSerializer("hoge.txt", false))
{
// write file
mesh2d.Serialize(fout);
}
using(CSerializer fin = new CSerializer("hoge.txt", true))
{ // load file
mesh2d.Serialize(fin);
}
DrawerAry.Clear();
DrawerAry.PushBack( new CDrawerMsh2D(mesh2d) );
DrawerAry.InitTrans( Camera );
}
}
else
{
Console.WriteLine("not exist:{0}", mshfn);
MessageBox.Show(string.Format("メッシュファイル:{0}がありません", mshfn));
}
}
else if( ProbNo == 2 )
{
string mshfn = "../../../input_file/rect_quad.msh";
if (File.Exists(mshfn))
{
using(CMesher2D mesh2d = new CMesher2D())
{
mesh2d.ReadFromFile_GiDMsh(mshfn);
using(CSerializer fout = new CSerializer("hoge.txt", false))
{
// write file
mesh2d.Serialize(fout);
}
using(CSerializer fin = new CSerializer("hoge.txt", true))
{ // load file
mesh2d.Serialize(fin);
}
DrawerAry.Clear();
DrawerAry.PushBack( new CDrawerMsh2D(mesh2d) );
DrawerAry.InitTrans( Camera );
}
}
else
{
Console.WriteLine("not exist:{0}", mshfn);
MessageBox.Show(string.Format("メッシュファイル:{0}がありません", mshfn));
}
}
else if( ProbNo == 3 )
{
using(CCadObj2D cad2d = new CCadObj2D())
{
IList<CVector2D> pts = new List<CVector2D>();
pts.Add( new CVector2D(0.0,0.0) );
pts.Add( new CVector2D(1.0,0.0) );
pts.Add( new CVector2D(1.0,0.5) );
pts.Add( new CVector2D(0.5,0.5) );
pts.Add( new CVector2D(0.5,1.0) );
pts.Add( new CVector2D(0.0,1.0) );
cad2d.AddPolygon( pts );
using(CMesher2D mesh2d = new CMesher2D(cad2d, 0.1))
using(CMesh3D_Extrude mesh3d = new CMesh3D_Extrude())
{
mesh3d.Extrude(mesh2d, 0.5, 0.1 );
using(CSerializer fout = new CSerializer("hoge.txt", false))
{
// write file
mesh3d.Serialize(fout);
}
using(CSerializer fin = new CSerializer("hoge.txt", true))
{ // load file
mesh3d.Serialize(fin);
}
DrawerAry.Clear();
DrawerAry.PushBack( new CDrawerMsh3D(mesh3d) );
DrawerAry.InitTrans( Camera );
}
}
}
else if( ProbNo == 4 ) // load mesh of GiD
{
string mshfn = "../../../input_file/hexa_tri.msh";
if (File.Exists(mshfn))
{
using(CMesher2D mesh2d = new CMesher2D())
using(CMesh3D_Extrude mesh3d = new CMesh3D_Extrude())
{
mesh2d.ReadFromFile_GiDMsh(mshfn);
mesh3d.Extrude(mesh2d, 5.0, 0.5 );
DrawerAry.Clear();
DrawerAry.PushBack( new CDrawerMsh3D(mesh3d) );
DrawerAry.InitTrans( Camera );
}
}
else
{
Console.WriteLine("not exist:{0}", mshfn);
MessageBox.Show(string.Format("メッシュファイル:{0}がありません", mshfn));
}
}
else if( ProbNo == 5 )
{
string mshfn = "../../../input_file/cylinder_hex.msh";
if (File.Exists(mshfn))
{
using(CMesher3D mesh3d = new CMesher3D())
{
mesh3d.ReadFromFile_GiDMsh(mshfn);
using(CSerializer fout = new CSerializer("hoge.txt", false))
{
// write file
mesh3d.Serialize(fout);
}
using(CSerializer fin = new CSerializer("hoge.txt", true))
{ // load file
mesh3d.Serialize(fin);
}
DrawerAry.Clear();
DrawerAry.PushBack( new CDrawerMsh3D(mesh3d) );
DrawerAry.InitTrans( Camera );
}
}
else
{
Console.WriteLine("not exist:{0}", mshfn);
MessageBox.Show(string.Format("メッシュファイル:{0}がありません", mshfn));
}
}
else if( ProbNo == 6 )
{
string mshfn = "../../../input_file/cylinder_tet.msh";
if (File.Exists(mshfn))
{
using(CMesher3D mesh3d = new CMesher3D())
{
mesh3d.ReadFromFile_GiDMsh(mshfn);
using(CSerializer fout = new CSerializer("hoge.txt", false))
{
// write file
mesh3d.Serialize(fout);
}
using(CSerializer fin = new CSerializer("hoge.txt", true))
{ // load file
mesh3d.Serialize(fin);
}
DrawerAry.Clear();
DrawerAry.PushBack( new CDrawerMsh3D(mesh3d) );
DrawerAry.InitTrans( Camera );
}
}
else
{
Console.WriteLine("not exist:{0}", mshfn);
MessageBox.Show(string.Format("メッシュファイル:{0}がありません", mshfn));
}
}
else if( ProbNo == 7 )
{
string mshfn = "../../../input_file/rect_quad.msh";
if (File.Exists(mshfn))
{
using(CMesher2D mesh2d = new CMesher2D())
using(CMesh3D_Extrude mesh3d = new CMesh3D_Extrude())
{
mesh2d.ReadFromFile_GiDMsh(mshfn);
mesh3d.Extrude(mesh2d, 5.0, 0.5 );
DrawerAry.Clear();
DrawerAry.PushBack( new CDrawerMsh3D(mesh3d) );
DrawerAry.InitTrans( Camera );
}
}
else
{
Console.WriteLine("not exist:{0}", mshfn);
MessageBox.Show(string.Format("メッシュファイル:{0}がありません", mshfn));
}
}
else if( ProbNo == 8 )
{
using(CCadObj2D cad2d = new CCadObj2D())
{
uint id_l = 0;
{
IList<CVector2D> pts = new List<CVector2D>();
pts.Add( new CVector2D(0.0,0.0) );
pts.Add( new CVector2D(1.0,0.0) );
pts.Add( new CVector2D(1.0,1.0) );
pts.Add( new CVector2D(0.0,1.0) );
id_l = cad2d.AddPolygon( pts ).id_l_add;
}
cad2d.AddVertex(CAD_ELEM_TYPE.LOOP,id_l, new CVector2D(0.8,0.6) );
cad2d.AddVertex(CAD_ELEM_TYPE.LOOP,id_l, new CVector2D(0.6,0.6) );
cad2d.AddVertex(CAD_ELEM_TYPE.LOOP,id_l, new CVector2D(0.4,0.6) );
cad2d.AddVertex(CAD_ELEM_TYPE.LOOP,id_l, new CVector2D(0.2,0.6) );
cad2d.AddVertex(CAD_ELEM_TYPE.LOOP,id_l, new CVector2D(0.8,0.4) );
cad2d.AddVertex(CAD_ELEM_TYPE.LOOP,id_l, new CVector2D(0.6,0.4) );
cad2d.AddVertex(CAD_ELEM_TYPE.LOOP,id_l, new CVector2D(0.4,0.4) );
cad2d.AddVertex(CAD_ELEM_TYPE.LOOP,id_l, new CVector2D(0.2,0.4) );
using(CMesher2D mesh2d = new CMesher2D(cad2d, 0.02))
{
using(CSerializer fout = new CSerializer("hoge.txt", false))
{
// write file
mesh2d.Serialize(fout);
}
using(CSerializer fin = new CSerializer("hoge.txt", true))
{ // load file
mesh2d.Serialize(fin);
}
DrawerAry.Clear();
DrawerAry.PushBack( new CDrawerMsh2D(mesh2d) );
DrawerAry.InitTrans( Camera );
}
}
}
else if( ProbNo == 9 )
{
using(CCadObj2D cad2d = new CCadObj2D())
{
{
IList<CVector2D> pts = new List<CVector2D>();
pts.Add( new CVector2D(0.0,0.0) );
pts.Add( new CVector2D(1.0,0.0) );
pts.Add( new CVector2D(1.0,1.0) );
pts.Add( new CVector2D(0.0,1.0) );
cad2d.AddPolygon( pts );
}
cad2d.SetCurve_Arc(1,true, -0.5);
cad2d.SetCurve_Arc(2,false,-0.5);
cad2d.SetCurve_Arc(3,true, -0.5);
cad2d.SetCurve_Arc(4,false,-0.5);
using(CMesher2D mesh2d = new CMesher2D(cad2d, 0.05))
{
using(CSerializer fout = new CSerializer("hoge.txt", false))
{
// write file
mesh2d.Serialize(fout);
}
using(CSerializer fin = new CSerializer("hoge.txt", true))
{ // load file
mesh2d.Serialize(fin);
}
DrawerAry.Clear();
DrawerAry.PushBack( new CDrawerMsh2D(mesh2d) );
DrawerAry.InitTrans( Camera );
}
}
}
else if( ProbNo == 10 )
{
using(CCadObj2D cad2d = new CCadObj2D())
{
{
IList<CVector2D> pts = new List<CVector2D>();
pts.Add( new CVector2D(0.0,0.0) );
pts.Add( new CVector2D(1.0,0.0) );
pts.Add( new CVector2D(1.0,1.0) );
pts.Add( new CVector2D(0.0,1.0) );
uint id_l = cad2d.AddPolygon( pts ).id_l_add;
uint id_v1 = cad2d.AddVertex(CAD_ELEM_TYPE.LOOP,id_l, new CVector2D(0.3,0.2)).id_v_add;
uint id_v2 = cad2d.AddVertex(CAD_ELEM_TYPE.LOOP,id_l, new CVector2D(0.7,0.2)).id_v_add;
uint id_v3 = cad2d.AddVertex(CAD_ELEM_TYPE.LOOP,id_l, new CVector2D(0.7,0.8)).id_v_add;
uint id_v4 = cad2d.AddVertex(CAD_ELEM_TYPE.LOOP,id_l, new CVector2D(0.3,0.8)).id_v_add;
cad2d.ConnectVertex_Line(id_v1,id_v2);
cad2d.ConnectVertex_Line(id_v2,id_v3);
cad2d.ConnectVertex_Line(id_v3,id_v4);
cad2d.ConnectVertex_Line(id_v4,id_v1);
}
using(CMesher2D mesh2d = new CMesher2D())
{
mesh2d.AddIdLCad_CutMesh(1); // cut mesh to loop whitch have id 1
mesh2d.SetMeshingMode_ElemLength(0.05);
mesh2d.Meshing(cad2d);
DrawerAry.Clear();
DrawerAry.PushBack( new CDrawerMsh2D(mesh2d) );
DrawerAry.InitTrans( Camera );
}
}
}
else if( ProbNo == 11 ) // mesh with cut
{
using(CCadObj2D cad2d = new CCadObj2D())
{
uint id_l;
uint id_e1, id_e2, id_e3, id_e4, id_e5;
{
IList<CVector2D> pts = new List<CVector2D>();
pts.Add( new CVector2D(0.0,0.0) );
pts.Add( new CVector2D(0.3,0.0) );
pts.Add( new CVector2D(1.0,0.0) );
pts.Add( new CVector2D(1.0,1.0) );
pts.Add( new CVector2D(0.0,1.0) );
id_l = cad2d.AddPolygon( pts ).id_l_add;
uint id_v1 = cad2d.AddVertex(CAD_ELEM_TYPE.LOOP, id_l, new CVector2D(0.3,0.5) ).id_v_add;
id_e1 = cad2d.ConnectVertex_Line(2,id_v1).id_e_add;
uint id_v2 = cad2d.AddVertex(CAD_ELEM_TYPE.LOOP, id_l, new CVector2D(0.7,0.5) ).id_v_add;
uint id_v3 = cad2d.AddVertex(CAD_ELEM_TYPE.LOOP, id_l, new CVector2D(0.7,0.2) ).id_v_add;
uint id_v4 = cad2d.AddVertex(CAD_ELEM_TYPE.LOOP, id_l, new CVector2D(0.7,0.8) ).id_v_add;
uint id_v5 = cad2d.AddVertex(CAD_ELEM_TYPE.LOOP, id_l, new CVector2D(0.5,0.5) ).id_v_add;
uint id_v6 = cad2d.AddVertex(CAD_ELEM_TYPE.LOOP, id_l, new CVector2D(0.9,0.5) ).id_v_add;
id_e2 = cad2d.ConnectVertex_Line(id_v2,id_v3).id_e_add;
id_e3 = cad2d.ConnectVertex_Line(id_v2,id_v4).id_e_add;
id_e4 = cad2d.ConnectVertex_Line(id_v2,id_v5).id_e_add;
id_e5 = cad2d.ConnectVertex_Line(id_v2,id_v6).id_e_add;
}
using(CMesher2D mesh2d = new CMesher2D(cad2d, 0.2))
{
IList<uint> aIdMsh_Inc = new List<uint>();
aIdMsh_Inc.Add( mesh2d.GetElemID_FromCadID(id_l,CAD_ELEM_TYPE.LOOP) );
IList<uint> aIdMshBar_Cut = new List<uint>();
aIdMshBar_Cut.Add( mesh2d.GetElemID_FromCadID(id_e1,CAD_ELEM_TYPE.EDGE) );
aIdMshBar_Cut.Add( mesh2d.GetElemID_FromCadID(id_e2,CAD_ELEM_TYPE.EDGE) );
aIdMshBar_Cut.Add( mesh2d.GetElemID_FromCadID(id_e3,CAD_ELEM_TYPE.EDGE) );
aIdMshBar_Cut.Add( mesh2d.GetElemID_FromCadID(id_e4,CAD_ELEM_TYPE.EDGE) );
aIdMshBar_Cut.Add( mesh2d.GetElemID_FromCadID(id_e5,CAD_ELEM_TYPE.EDGE) );
////////////////
IList< IList<int> > aLnods = new List<IList<int>>();
IList<uint> mapVal2Co = new List<uint>();
mesh2d.GetClipedMesh(out aLnods, out mapVal2Co, aIdMsh_Inc, aIdMshBar_Cut);
DrawerAry.Clear();
DrawerAry.PushBack( new CDrawerMsh2D(mesh2d) );
DrawerAry.InitTrans( Camera );
}
}
}
else if( ProbNo == 12 ) // mesh with cut
{
using(CCadObj2D cad2d = new CCadObj2D())
{
uint id_l1, id_l2;
uint id_e3, id_e4;
{
IList<CVector2D> pts = new List<CVector2D>();
pts.Add( new CVector2D(0.0, 0.0) );
pts.Add( new CVector2D(1.0, 0.0) );
pts.Add( new CVector2D(1.5, 0.0) );
pts.Add( new CVector2D(2.0, 0.0) );
pts.Add( new CVector2D(2.0, 1.0) );
pts.Add( new CVector2D(1.5, 1.0) );
pts.Add( new CVector2D(1.0, 1.0) );
pts.Add( new CVector2D(0.0, 1.0) );
uint id_l0 = cad2d.AddPolygon( pts ).id_l_add;
uint id_v1 = cad2d.AddVertex(CAD_ELEM_TYPE.LOOP,id_l0, new CVector2D(0.5,0.5) ).id_v_add;
uint id_e1 = cad2d.ConnectVertex_Line(2,7).id_e_add;
uint id_e2 = cad2d.ConnectVertex_Line(3,6).id_e_add;
uint id_v2 = cad2d.AddVertex(CAD_ELEM_TYPE.EDGE,id_e1, new CVector2D(1.0,0.5) ).id_v_add;
uint id_v3 = cad2d.AddVertex(CAD_ELEM_TYPE.EDGE,1, new CVector2D(0.5,0.0) ).id_v_add;
id_e3 = cad2d.ConnectVertex_Line(id_v1,id_v2).id_e_add;
id_e4 = cad2d.ConnectVertex_Line(id_v1,id_v3).id_e_add;
id_l1 = 1;
id_l2 = 2;
}
using(CMesher2D mesh2d = new CMesher2D(cad2d, 0.2))
{
IList<uint> aIdMsh_Inc = new List<uint>();
aIdMsh_Inc.Add( mesh2d.GetElemID_FromCadID(id_l1,CAD_ELEM_TYPE.LOOP) );
aIdMsh_Inc.Add( mesh2d.GetElemID_FromCadID(id_l2,CAD_ELEM_TYPE.LOOP) );
IList<uint> aIdMshBar_Cut = new List<uint>();
//aIdMshBar_Cut.Add( mesh2d.GetElemID_FromCadID(id_e3,CAD_ELEM_TYPE.EDGE) );
aIdMshBar_Cut.Add( mesh2d.GetElemID_FromCadID(id_e4,CAD_ELEM_TYPE.EDGE) );
////////////////
IList< IList<int> > aLnods = new List<IList<int>>();
IList<uint> mapVal2Co = new List<uint>();
mesh2d.GetClipedMesh(out aLnods, out mapVal2Co, aIdMsh_Inc, aIdMshBar_Cut);
DrawerAry.Clear();
DrawerAry.PushBack( new CDrawerMsh2D(mesh2d) );
DrawerAry.InitTrans( Camera );
}
}
}
else if( ProbNo == 13 )
{
using(CCadObj2D cad2d = new CCadObj2D())
{
{
IList<CVector2D> pts = new List<CVector2D>();
pts.Add( new CVector2D(0.0, 0.0) ); // 1
pts.Add( new CVector2D(1.5, 0.0) ); // 2
pts.Add( new CVector2D(1.5, 0.4) ); // 3
pts.Add( new CVector2D(1.0, 0.4) ); // 4
pts.Add( new CVector2D(1.0, 0.5) ); // 5
pts.Add( new CVector2D(2.0, 0.5) ); // 6
pts.Add( new CVector2D(2.0, 1.0) ); // 7
pts.Add( new CVector2D(0.0, 1.0) ); // 8
pts.Add( new CVector2D(0.0, 0.5) ); // 9
uint id_l0 = cad2d.AddPolygon( pts ).id_l_add;
uint id_e1 = cad2d.ConnectVertex_Line(5,9).id_e_add;
cad2d.ShiftLayer_Loop(id_l0,true);
double[] col = new double[3] { 0.9, 0.4, 0.4 };
cad2d.SetColor_Loop(id_l0, col);
cad2d.AddVertex(CAD_ELEM_TYPE.EDGE,3, new CVector2D(1.3,0.5));
}
using(CMesher2D mesh2d = new CMesher2D(cad2d, 0.05))
{
DrawerAry.Clear();
DrawerAry.PushBack( new CDrawerMsh2D(mesh2d) );
DrawerAry.InitTrans( Camera );
}
}
}
else if( ProbNo == 14 )
{
string svgfn = "../../../input_file/shape2d_0.svg";
if (File.Exists(svgfn))
{
CCadObj2D cad2d = null;
CCadSVG.ReadSVG_AddLoopCad(svgfn, out cad2d);
using (CMesher2D mesh2d = new CMesher2D())
{
mesh2d.SetMeshingMode_ElemSize(400);
mesh2d.AddIdLCad_CutMesh(1);
mesh2d.Meshing(cad2d);
DrawerAry.Clear();
DrawerAry.PushBack(new CDrawerMsh2D(mesh2d));
DrawerAry.InitTrans(Camera);
}
cad2d.Clear();
cad2d.Dispose();
}
else
{
Console.WriteLine("not exist:{0}", svgfn);
MessageBox.Show(string.Format("SVGファイル:{0}がありません", svgfn));
}
}
success = true;
}
catch (Exception exception)
{
Console.WriteLine(exception.Message + " " + exception.StackTrace);
}
Gl.glMatrixMode(Gl.GL_PROJECTION);
Gl.glLoadIdentity();
DrawerGlUtility.SetProjectionTransform(Camera);
Glut.glutPostRedisplay();
ProbNo++;
if (ProbNo == ProbCnt) ProbNo = 0;
return success;
}
/// <summary>
/// 問題を設定する
/// </summary>
/// <returns></returns>
private bool setNewProblem()
{
bool success = false;
try
{
using (CCadObj2D cad2d = new CCadObj2D())
{
if (ProbNo == 0)
{
IList<CVector2D> pts = new List<CVector2D>();
pts.Add(new CVector2D(0.0, 0.0));
pts.Add(new CVector2D(1.0, 0.0));
pts.Add(new CVector2D(1.0, 1.0));
pts.Add(new CVector2D(0.0, 1.0));
uint id_l0 = cad2d.AddPolygon(pts, 0).id_l_add;
uint id_v5 = cad2d.AddVertex(CAD_ELEM_TYPE.LOOP, id_l0, new CVector2D(0.5, 0.5)).id_v_add;
uint id_v6 = cad2d.AddVertex(CAD_ELEM_TYPE.LOOP, id_l0, new CVector2D(0.5, 0.8)).id_v_add;
uint id_v7 = cad2d.AddVertex(CAD_ELEM_TYPE.LOOP, id_l0, new CVector2D(0.8, 0.5)).id_v_add;
uint id_v8 = cad2d.AddVertex(CAD_ELEM_TYPE.LOOP, id_l0, new CVector2D(0.5, 0.2)).id_v_add;
uint id_v9 = cad2d.AddVertex(CAD_ELEM_TYPE.LOOP, id_l0, new CVector2D(0.2, 0.5)).id_v_add;
cad2d.ConnectVertex_Line(id_v5, id_v6);
cad2d.ConnectVertex_Line(id_v5, id_v7);
cad2d.ConnectVertex_Line(id_v5, id_v8);
cad2d.ConnectVertex_Line(id_v5, id_v9);
using (CCadObj2D cad2dtmp = cad2d.Clone()) // コピーのテスト
{
// export to the file
using (CSerializer fout = new CSerializer("hoge.txt", false))
{
cad2dtmp.Serialize(fout);
}
}
// import form the file
cad2d.Clear();
using (CSerializer fin = new CSerializer("hoge.txt", true))
{
cad2d.Serialize(fin);
}
DrawerAry.Clear();
DrawerAry.PushBack(new CDrawer_Cad2D(cad2d));
DrawerAry.InitTrans(Camera);
}
else if (ProbNo == 1)
{
CCadObj2D.CResAddPolygon res;
{ // define shape
IList<CVector2D> pts = new List<CVector2D>();
pts.Add(new CVector2D(0.0, 0.0));
pts.Add(new CVector2D(1.0, 0.0));
pts.Add(new CVector2D(2.0, 1.0));
pts.Add(new CVector2D(1.0, 1.0));
pts.Add(new CVector2D(1.0, 2.0));
pts.Add(new CVector2D(0.0, 2.0));
res = cad2d.AddPolygon(pts);
}
cad2d.RemoveElement(CAD_ELEM_TYPE.EDGE, res.aIdE[1]);
cad2d.RemoveElement(CAD_ELEM_TYPE.EDGE, res.aIdE[2]);
cad2d.RemoveElement(CAD_ELEM_TYPE.VERTEX, res.aIdV[2]);
uint id_e_new = cad2d.ConnectVertex_Line(res.aIdE[3], res.aIdE[1]).id_e_add;
CCadObj2D.CResAddVertex res0 = cad2d.AddVertex(CAD_ELEM_TYPE.EDGE, id_e_new, new CVector2D(1, 0.4));
CCadObj2D.CResAddVertex res1 = cad2d.AddVertex(CAD_ELEM_TYPE.EDGE, id_e_new, new CVector2D(1, 0.6));
CCadObj2D.CResAddVertex res2 = cad2d.AddVertex(CAD_ELEM_TYPE.EDGE, res.aIdE[5], new CVector2D(0, 0.4));
CCadObj2D.CResAddVertex res3 = cad2d.AddVertex(CAD_ELEM_TYPE.EDGE, res.aIdE[5], new CVector2D(0, 0.6));
cad2d.ConnectVertex_Line(res0.id_v_add, res2.id_v_add);
cad2d.ConnectVertex_Line(res1.id_v_add, res3.id_v_add);
cad2d.RemoveElement(CAD_ELEM_TYPE.EDGE, res1.id_e_add);
cad2d.RemoveElement(CAD_ELEM_TYPE.EDGE, res3.id_e_add);
using (CCadObj2D cad2dtmp = cad2d.Clone()) // コピーのテスト
{
// export to the file
using (CSerializer fout = new CSerializer("hoge.txt", false))
{
cad2dtmp.Serialize(fout);
}
}
// import form the file
cad2d.Clear();
using (CSerializer fin = new CSerializer("hoge.txt", true))
{
cad2d.Serialize(fin);
}
DrawerAry.Clear();
DrawerAry.PushBack(new CDrawer_Cad2D(cad2d));
DrawerAry.InitTrans(Camera);
}
else if (ProbNo == 2)
{
uint id_l0;
{ // Make model
IList<CVector2D> pts = new List<CVector2D>();
pts.Add(new CVector2D(0.0, 0.0));
pts.Add(new CVector2D(1.0, 0.0));
pts.Add(new CVector2D(1.0, 0.4));
pts.Add(new CVector2D(0.0, 0.4));
id_l0 = cad2d.AddPolygon(pts).id_l_add;
}
//cad2d.SetCurve_Arc(1,true,-0.2);
//cad2d.SetCurve_Arc(2,true, -0.5);
cad2d.SetCurve_Arc(3, false, 0);
//cad2d.SetCurve_Arc(4,true, -0.5);
DrawerAry.Clear();
DrawerAry.PushBack(new CDrawer_Cad2D(cad2d));
DrawerAry.InitTrans(Camera);
}
else if (ProbNo == 3)
{
uint id_v1 = cad2d.AddVertex(CAD_ELEM_TYPE.NOT_SET, 0, new CVector2D(0, 0)).id_v_add;
uint id_v2 = cad2d.AddVertex(CAD_ELEM_TYPE.NOT_SET, 0, new CVector2D(1, 0)).id_v_add;
cad2d.ConnectVertex_Line(id_v1, id_v2);
uint id_v3 = cad2d.AddVertex(CAD_ELEM_TYPE.NOT_SET, 0, new CVector2D(1, 1)).id_v_add;
cad2d.ConnectVertex_Line(id_v2, id_v3);
uint id_v4 = cad2d.AddVertex(CAD_ELEM_TYPE.NOT_SET, 0, new CVector2D(0, 1)).id_v_add;
cad2d.ConnectVertex_Line(id_v4, id_v3);
uint id_v5 = cad2d.AddVertex(CAD_ELEM_TYPE.EDGE, 2, new CVector2D(1, 0.5)).id_v_add;
uint id_v7 = cad2d.AddVertex(CAD_ELEM_TYPE.NOT_SET, 0, new CVector2D(0.5, 0.5)).id_v_add;
cad2d.ConnectVertex_Line(id_v5, id_v7);
uint id_v6 = cad2d.AddVertex(CAD_ELEM_TYPE.NOT_SET, 0, new CVector2D(1.5, 0.5)).id_v_add;
cad2d.ConnectVertex_Line(id_v5, id_v6);
cad2d.ConnectVertex_Line(id_v4, id_v1);
DrawerAry.Clear();
DrawerAry.PushBack(new CDrawer_Cad2D(cad2d));
DrawerAry.InitTrans(Camera);
}
else if (ProbNo == 4)
{
uint id_l0;
{ // define shape
IList<CVector2D> pts = new List<CVector2D>();
pts.Add(new CVector2D(0.0, 0.0));
pts.Add(new CVector2D(1.0, 0.0));
pts.Add(new CVector2D(1.0, 1.0));
pts.Add(new CVector2D(0.0, 1.0));
id_l0 = cad2d.AddPolygon(pts).id_l_add;
}
//uint id_v1 = cad2d.AddVertex(CAD_ELEM_TYPE.LOOP,id_l0,new CVector2D(0.5,0.5));
uint id_v2 = cad2d.AddVertex(CAD_ELEM_TYPE.LOOP, id_l0, new CVector2D(0.5, 0.2)).id_v_add;
uint id_v3 = cad2d.AddVertex(CAD_ELEM_TYPE.LOOP, id_l0, new CVector2D(0.8, 0.5)).id_v_add;
uint id_v4 = cad2d.AddVertex(CAD_ELEM_TYPE.LOOP, id_l0, new CVector2D(0.5, 0.8)).id_v_add;
uint id_v5 = cad2d.AddVertex(CAD_ELEM_TYPE.LOOP, id_l0, new CVector2D(0.2, 0.5)).id_v_add;
cad2d.ConnectVertex_Line(id_v2, id_v3);
cad2d.ConnectVertex_Line(id_v3, id_v4);
cad2d.ConnectVertex_Line(id_v4, id_v5);
uint id_e1 = cad2d.ConnectVertex_Line(id_v5, id_v2).id_e_add;
cad2d.RemoveElement(CAD_ELEM_TYPE.EDGE, id_e1);
cad2d.ConnectVertex_Line(id_v5, id_v2);
DrawerAry.Clear();
DrawerAry.PushBack(new CDrawer_Cad2D(cad2d));
DrawerAry.InitTrans(Camera);
}
else if (ProbNo == 5)
{
uint id_l0;
{ // define shape
IList<CVector2D> pts = new List<CVector2D>();
pts.Add(new CVector2D(0.0, 0.0));
pts.Add(new CVector2D(0.0, 1.0));
pts.Add(new CVector2D(1.0, 1.0));
pts.Add(new CVector2D(1.0, 0.0));
id_l0 = cad2d.AddPolygon(pts).id_l_add;
}
DrawerAry.Clear();
DrawerAry.PushBack(new CDrawer_Cad2D(cad2d));
DrawerAry.InitTrans(Camera);
}
else if (ProbNo == 6)
{
uint id_l0;
{ // define initial loop
IList<CVector2D> pts = new List<CVector2D>();
pts.Add(new CVector2D(0.0, 0.0));
pts.Add(new CVector2D(1.0, 0.0));
pts.Add(new CVector2D(1.0, 1.0));
pts.Add(new CVector2D(0.0, 1.0));
id_l0 = cad2d.AddPolygon(pts).id_l_add;
}
{
IList<CVector2D> pts = new List<CVector2D>();
pts.Add(new CVector2D(0.3, 0.1));
pts.Add(new CVector2D(0.9, 0.1));
pts.Add(new CVector2D(0.9, 0.7));
cad2d.AddPolygon(pts, id_l0);
}
{
IList<CVector2D> pts = new List<CVector2D>();
pts.Add(new CVector2D(0.1, 0.9));
pts.Add(new CVector2D(0.7, 0.9));
pts.Add(new CVector2D(0.1, 0.3));
cad2d.AddPolygon(pts, id_l0);
}
uint id_e0 = cad2d.ConnectVertex_Line(1, 3).id_e_add;
cad2d.RemoveElement(CAD_ELEM_TYPE.EDGE, id_e0);
DrawerAry.Clear();
DrawerAry.PushBack(new CDrawer_Cad2D(cad2d));
DrawerAry.InitTrans(Camera);
}
else if (ProbNo == 7)
{
uint id_l0;
{ // define shape
IList<CVector2D> pts = new List<CVector2D>();
pts.Add(new CVector2D(0.0, 0.0));
pts.Add(new CVector2D(1.0, 0.0));
pts.Add(new CVector2D(1.0, 1.0));
pts.Add(new CVector2D(0.0, 1.0));
id_l0 = cad2d.AddPolygon(pts).id_l_add;
}
uint id_v1 = cad2d.AddVertex(CAD_ELEM_TYPE.LOOP, id_l0, new CVector2D(0.9, 0.7)).id_v_add;
uint id_v2 = cad2d.AddVertex(CAD_ELEM_TYPE.LOOP, id_l0, new CVector2D(0.9, 0.1)).id_v_add;
uint id_v3 = cad2d.AddVertex(CAD_ELEM_TYPE.LOOP, id_l0, new CVector2D(0.3, 0.1)).id_v_add;
cad2d.ConnectVertex_Line(id_v1, id_v2);
cad2d.ConnectVertex_Line(id_v2, id_v3);
cad2d.ConnectVertex_Line(id_v3, id_v1);
{
uint id_e0 = cad2d.ConnectVertex_Line(id_v2, 2).id_e_add;
cad2d.RemoveElement(CAD_ELEM_TYPE.EDGE, id_e0);
}
{
uint id_e0 = cad2d.ConnectVertex_Line(2, id_v2).id_e_add;
cad2d.RemoveElement(CAD_ELEM_TYPE.EDGE, id_e0);
}
DrawerAry.Clear();
DrawerAry.PushBack(new CDrawer_Cad2D(cad2d));
DrawerAry.InitTrans(Camera);
}
else if (ProbNo == 8)
{
uint id_e3, id_e4;
{
IList<CVector2D> pts = new List<CVector2D>();
pts.Add(new CVector2D(0.0, 0.0)); // 1
pts.Add(new CVector2D(1.0, 0.0)); // 2
pts.Add(new CVector2D(1.5, 0.0)); // 3
pts.Add(new CVector2D(2.0, 0.0)); // 4
pts.Add(new CVector2D(2.0, 1.0)); // 5
pts.Add(new CVector2D(1.5, 1.0)); // 6
pts.Add(new CVector2D(1.0, 1.0)); // 7
pts.Add(new CVector2D(0.0, 1.0)); // 8
uint id_l0 = cad2d.AddPolygon(pts).id_l_add;
uint id_v1 = cad2d.AddVertex(CAD_ELEM_TYPE.LOOP, id_l0, new CVector2D(0.5, 0.5)).id_v_add;
uint id_e1 = cad2d.ConnectVertex_Line(2, 7).id_e_add;
uint id_e2 = cad2d.ConnectVertex_Line(3, 6).id_e_add;
uint id_v2 = cad2d.AddVertex(CAD_ELEM_TYPE.EDGE, id_e1, new CVector2D(1.0, 0.5)).id_v_add;
uint id_v3 = cad2d.AddVertex(CAD_ELEM_TYPE.EDGE, 1, new CVector2D(0.5, 0.0)).id_v_add;
id_e3 = cad2d.ConnectVertex_Line(id_v1, id_v2).id_e_add;
id_e4 = cad2d.ConnectVertex_Line(id_v1, id_v3).id_e_add;
}
DrawerAry.Clear();
DrawerAry.PushBack(new CDrawer_Cad2D(cad2d));
DrawerAry.InitTrans(Camera);
}
else if (ProbNo == 9)
{
uint id_l0;
{ // define shape
IList<CVector2D> pts = new List<CVector2D>();
pts.Add(new CVector2D(0.0, 0.0));
pts.Add(new CVector2D(1.0, 0.0));
pts.Add(new CVector2D(1.0, 1.0));
pts.Add(new CVector2D(0.0, 1.0));
id_l0 = cad2d.AddPolygon(pts).id_l_add;
}
uint id_v1 = cad2d.AddVertex(CAD_ELEM_TYPE.LOOP, id_l0, new CVector2D(0.2, 0.7)).id_v_add;
uint id_v2 = cad2d.AddVertex(CAD_ELEM_TYPE.LOOP, id_l0, new CVector2D(0.2, 0.3)).id_v_add;
uint id_e0 = cad2d.ConnectVertex_Line(id_v1, id_v2).id_e_add;
uint id_v3 = cad2d.AddVertex(CAD_ELEM_TYPE.EDGE, id_e0, new CVector2D(0.2, 0.5)).id_v_add;
uint id_v4 = cad2d.AddVertex(CAD_ELEM_TYPE.LOOP, id_l0, new CVector2D(0.5, 0.5)).id_v_add;
uint id_v5 = cad2d.AddVertex(CAD_ELEM_TYPE.LOOP, id_l0, new CVector2D(0.7, 0.5)).id_v_add;
uint id_e1 = cad2d.ConnectVertex_Line(id_v3, id_v4).id_e_add;
uint id_e2 = cad2d.ConnectVertex_Line(id_v4, id_v5).id_e_add;
cad2d.RemoveElement(CAD_ELEM_TYPE.EDGE, id_e1);
DrawerAry.Clear();
DrawerAry.PushBack(new CDrawer_Cad2D(cad2d));
DrawerAry.InitTrans(Camera);
}
else if (ProbNo == 10)
{
uint id_l0;
{ // define shape
IList<CVector2D> pts = new List<CVector2D>();
pts.Add(new CVector2D(0.0, 0.0));
pts.Add(new CVector2D(1.0, 0.0));
pts.Add(new CVector2D(1.0, 1.0));
pts.Add(new CVector2D(0.0, 1.0));
id_l0 = cad2d.AddPolygon(pts).id_l_add;
}
uint id_v1 = cad2d.AddVertex(CAD_ELEM_TYPE.LOOP, 0, new CVector2D(1.1, 0)).id_v_add;
cad2d.RemoveElement(CAD_ELEM_TYPE.VERTEX, id_v1);
DrawerAry.Clear();
DrawerAry.PushBack(new CDrawer_Cad2D(cad2d));
DrawerAry.InitTrans(Camera);
}
else if (ProbNo == 11)
{
{ // define initial loop
IList<CVector2D> pts = new List<CVector2D>();
pts.Add(new CVector2D(0.0, 0.0));
pts.Add(new CVector2D(1.0, 0.0));
pts.Add(new CVector2D(1.0, 1.0));
pts.Add(new CVector2D(0.0, 1.0));
pts.Add(new CVector2D(0.0, 0.5));
cad2d.AddPolygon(pts);
}
/*
{
IList<CVector2D> aRelCo = new List<CVector2D>();
aRelCo.Add(new CVector2D(0.25, -0.1));
aRelCo.Add(new CVector2D(0.5, -0.0));
aRelCo.Add(new CVector2D(0.75, -0.1));
cad2d.SetCurve_Polyline(1, aRelCo);
}
cad2d.SetCurve_Arc(2, true, -1);
{
IList<CVector2D> aRelCo = new List<CVector2D>();
aRelCo.Add(new CVector2D(+0.01, 0.35));
aRelCo.Add(new CVector2D(-0.05, 0.25));
aRelCo.Add(new CVector2D(+0.01, 0.15));
cad2d.SetCurve_Polyline(5, aRelCo);
}
*/
cad2d.RemoveElement(CAD_ELEM_TYPE.VERTEX, 1); // removing this point marges 2 polylines
cad2d.SetCurve_Bezier(3, 0.2, +0.5, 0.8, -0.5);
//cad2d.SetCurve_Bezier(4, 0.0,-1.0, 0.3,+1.0);
//cad2d.SetCurve_Bezier(5, 0.0,-1.0, 0.3,-1.0);
Console.WriteLine("area : {0}", cad2d.GetArea_Loop(1));
cad2d.WriteToFile_dxf("hoge.dxf", 1);
DrawerAry.Clear();
DrawerAry.PushBack(new CDrawer_Cad2D(cad2d));
DrawerAry.InitTrans(Camera);
}
else if (ProbNo == 12)
{
string svgfname = "../../../input_file/shape2d_0.svg";
CCadObj2D cad2dtmp = null;
if (File.Exists(svgfname))
{
DelFEM4NetCad.CCadSVG.ReadSVG_AddLoopCad(svgfname, out cad2dtmp);
// export to the file
using (CSerializer fout = new CSerializer("hoge.txt", false))
{
cad2dtmp.Serialize(fout);
}
cad2dtmp.Dispose();
// import form the file
cad2d.Clear();
using (CSerializer fin = new CSerializer("hoge.txt", true))
{
cad2d.Serialize(fin);
}
DrawerAry.Clear();
DrawerAry.PushBack(new CDrawer_Cad2D(cad2d));
DrawerAry.InitTrans(Camera);
}
else
{
MessageBox.Show("SVGファイルがありません");
}
}
} // using cad2d
success = true;
}
catch (Exception exception)
{
Console.WriteLine(exception.Message + " " + exception.StackTrace);
}
Gl.glMatrixMode(Gl.GL_PROJECTION);
Gl.glLoadIdentity();
DrawerGlUtility.SetProjectionTransform(Camera);
Glut.glutPostRedisplay();
ProbNo++;
if (ProbNo == ProbCnt) ProbNo = 0;
return success;
}