public void Bzip2_CompressDecompress()
{
// Start with a MemoryStream created from the sample data
using (MemoryStream source = new MemoryStream(s_sampledata))
{
using (MemoryStream dest = new MemoryStream())
{
// Compress the data into the destination memory stream instance
using (Bzip2Writer compressor = new Bzip2Writer(dest, CompressionLevel.Optimal, true)) source.CopyTo(compressor);
// The compressed data should be smaller than the source data
Assert.IsTrue(dest.Length < source.Length);
source.SetLength(0); // Clear the source stream
dest.Position = 0; // Reset the destination stream
// Decompress the data back into the source memory stream
using (Bzip2Reader decompressor = new Bzip2Reader(dest, true)) decompressor.CopyTo(source);
// Ensure that the original data has been restored
Assert.AreEqual(source.Length, s_sampledata.Length);
Assert.IsTrue(s_sampledata.SequenceEqual(source.ToArray()));
}
}
}
public void Bzip2_Flush()
{
// Verify behavior of flushing a compression stream
using (MemoryStream compressed = new MemoryStream())
{
using (Bzip2Writer stream = new Bzip2Writer(compressed, true))
{
stream.Write(s_sampledata, 0, s_sampledata.Length);
// Get the unflushed length of the compressed stream and flush it
long unflushed = compressed.Length;
stream.Flush();
// The expectation is that the output stream will be longer after the flush
long flushedonce = compressed.Length;
Assert.IsTrue(compressed.Length > unflushed);
// Flushing the same data a second time should not have any impact at all
stream.Flush();
Assert.AreEqual(compressed.Length, flushedonce);
// The stream should still be writable after a flush operation
stream.Write(s_sampledata, 0, s_sampledata.Length / 10);
}
}
// Verify behavior of flushing a decompression stream
using (Bzip2Reader stream = new Bzip2Reader(new MemoryStream(s_sampledata)))
{
// Flush has no effect on decompression streams, just ensure it doesn't throw
stream.Flush();
}
}
public void Bzip2_Seek()
{
// Verify behavior of a compression stream
using (Bzip2Writer stream = new Bzip2Writer(new MemoryStream()))
{
try { stream.Seek(50, SeekOrigin.Begin); Assert.Fail("Method call should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(NotSupportedException)); }
try { stream.Seek(0, SeekOrigin.Current); Assert.Fail("Method call should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(NotSupportedException)); }
try { stream.Seek(-50, SeekOrigin.End); Assert.Fail("Method call should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(NotSupportedException)); }
}
// Verify behavior of a decompression stream
using (Bzip2Reader stream = new Bzip2Reader(new MemoryStream(s_sampledata)))
{
try { stream.Seek(50, SeekOrigin.Begin); Assert.Fail("Method call should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(NotSupportedException)); }
try { stream.Seek(0, SeekOrigin.Current); Assert.Fail("Method call should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(NotSupportedException)); }
try { stream.Seek(-50, SeekOrigin.End); Assert.Fail("Method call should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(NotSupportedException)); }
}
}
public void Bzip2_CompressExternal()
{
// This method generates an output file that can be tested externally; "thethreemusketeers.txt" is
// set to Copy Always to the output directory, it can be diffed after running the external tool
using (Bzip2Writer writer = new Bzip2Writer(File.Create(Path.Combine(Environment.CurrentDirectory, "thethreemusketeers.bz2"))))
{
writer.Write(s_sampledata);
writer.Flush();
}
}
public void Bzip2_CanWrite()
{
// Verify behavior of a compression stream
using (Bzip2Writer stream = new Bzip2Writer(new MemoryStream()))
{
Assert.IsTrue(stream.CanWrite);
}
// Verify behavior of a decompression stream
using (Bzip2Reader stream = new Bzip2Reader(new MemoryStream(s_sampledata)))
{
Assert.IsFalse(stream.CanWrite);
}
}
public void Bzip2_SetLength()
{
// Verify behavior of a compression stream
using (Bzip2Writer stream = new Bzip2Writer(new MemoryStream()))
{
try { stream.SetLength(12345L); Assert.Fail("Method call should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(NotSupportedException)); }
}
// Verify behavior of a decompression stream
using (Bzip2Reader stream = new Bzip2Reader(new MemoryStream(s_sampledata)))
{
try { stream.SetLength(12345L); Assert.Fail("Method call should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(NotSupportedException)); }
}
}
public void Bzip2_BaseStream()
{
using (MemoryStream source = new MemoryStream())
{
using (Bzip2Writer stream = new Bzip2Writer(source, CompressionLevel.Optimal))
{
Assert.IsNotNull(stream.BaseStream);
Assert.AreSame(source, stream.BaseStream);
}
using (Bzip2Reader stream = new Bzip2Reader(source, true))
{
Assert.IsNotNull(stream.BaseStream);
Assert.AreSame(source, stream.BaseStream);
}
}
}
public void Bzip2_Bzip2Exception()
{
using (MemoryStream compressed = new MemoryStream())
{
// Start with a compressed MemoryStream created from the sample data
using (Bzip2Writer compressor = new Bzip2Writer(compressed, CompressionLevel.Optimal, true))
{
compressor.Write(s_sampledata, 0, s_sampledata.Length);
compressor.Flush();
}
byte[] buffer = new byte[8192];
Bzip2Exception thrown = null;
Bzip2Exception deserialized = null;
// Create a decompressor to test exception cases
using (Bzip2Reader decompressor = new Bzip2Reader(compressed, true))
{
// Attempting to read from the middle of the compressed stream should throw a Bzip2Exception
compressed.Position = compressed.Length / 2;
try { decompressor.Read(buffer, 0, 8192); Assert.Fail("Method call should have thrown an exception"); }
catch (Bzip2Exception ex) { thrown = ex; }
Assert.IsNotNull(thrown);
Assert.IsInstanceOfType(thrown, typeof(Bzip2Exception));
// Check the error code property
Assert.AreEqual(-5, thrown.ErrorCode); // BZ_DATA_ERROR_MAGIC (-5)
// Serialize and de-serialize the exception with a BinaryFormatter
BinaryFormatter formatter = new BinaryFormatter();
using (MemoryStream memstream = new MemoryStream())
{
formatter.Serialize(memstream, thrown);
memstream.Seek(0, 0);
deserialized = (Bzip2Exception)formatter.Deserialize(memstream);
}
// Check that the exceptions are equivalent
Assert.AreEqual(thrown.ErrorCode, deserialized.ErrorCode);
Assert.AreEqual(thrown.StackTrace, deserialized.StackTrace);
Assert.AreEqual(thrown.ToString(), deserialized.ToString());
}
}
}
public void Bzip2_Write()
{
byte[] buffer = new byte[8192]; // 8KiB data buffer
// Compress the sample data using a call to Write directly
using (MemoryStream compressed = new MemoryStream())
{
// Check the constructor for ArgumentNullException while we're here
try { using (Bzip2Writer compressor = new Bzip2Writer(null)) { }; Assert.Fail("Constructor should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ArgumentNullException)); }
using (Bzip2Writer compressor = new Bzip2Writer(compressed, CompressionLevel.Optimal, true))
{
// Send in some bum arguments to Write() to check they are caught
try { compressor.Write(null); Assert.Fail("Method call should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ArgumentNullException)); }
try { compressor.Write(null, 0, 0); Assert.Fail("Method call should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ArgumentNullException)); }
try { compressor.Write(s_sampledata, -1, 0); Assert.Fail("Method call should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ArgumentOutOfRangeException)); }
try { compressor.Write(s_sampledata, 0, -1); Assert.Fail("Method call should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ArgumentOutOfRangeException)); }
try { compressor.Write(s_sampledata, 0, s_sampledata.Length + 1024); Assert.Fail("Method call should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ArgumentException)); }
// Not writing anything shouldn't throw an exception
compressor.Write(s_sampledata, 0, 0);
// Compress the data; there really isn't much that can go wrong with Write() itself
compressor.Write(s_sampledata, 0, s_sampledata.Length);
compressor.Flush();
}
using (Bzip2Reader reader = new Bzip2Reader(compressed, true))
{
try { reader.Write(buffer, 0, buffer.Length); Assert.Fail("Method call should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(NotSupportedException)); }
}
}
}
public void Bzip2_Position()
{
// Start with a MemoryStream created from the sample data
using (MemoryStream source = new MemoryStream(s_sampledata))
{
using (MemoryStream dest = new MemoryStream())
{
// Test a compression stream
using (Bzip2Writer compressor = new Bzip2Writer(dest, CompressionLevel.Optimal, true))
{
// The stream should report position zero prior to compression
Assert.AreEqual(0L, compressor.Position);
source.CopyTo(compressor);
// The stream should report non-zero after compression
Assert.AreNotEqual(0L, compressor.Position);
// Attempting to set the position on the stream should throw
try { compressor.Position = 12345L; Assert.Fail("Property should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(NotSupportedException)); }
}
source.SetLength(0); // Clear the source stream
dest.Position = 0; // Reset the destination stream
// Test a decompression stream
using (Bzip2Reader decompressor = new Bzip2Reader(dest, true))
{
// The stream should report position zero prior to compression
Assert.AreEqual(0L, decompressor.Position);
decompressor.CopyTo(source);
// The stream should report non-zero after compression
Assert.AreNotEqual(0L, decompressor.Position);
// Attempting to set the position on the stream should throw
try { decompressor.Position = 12345L; Assert.Fail("Property should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(NotSupportedException)); }
}
}
}
}
public void Bzip2_CompressionLevel()
{
using (MemoryStream source = new MemoryStream(s_sampledata))
{
long fastest, optimal; // Size of compressed streams
// CompressionLevel.NoCompression is not valid
try { using (Bzip2Writer stream = new Bzip2Writer(source, CompressionLevel.NoCompression)) Assert.Fail("Method call should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ArgumentOutOfRangeException)); }
// Compress using CompressionLevel.Fastest
using (MemoryStream compressed = new MemoryStream())
{
using (Bzip2Writer compressor = new Bzip2Writer(compressed, CompressionLevel.Fastest))
{
compressor.Write(s_sampledata, 0, s_sampledata.Length);
compressor.Flush();
fastest = compressed.Length;
}
}
// Compress using CompressionLevel.Optimal
using (MemoryStream compressed = new MemoryStream())
{
using (Bzip2Writer compressor = new Bzip2Writer(compressed, CompressionLevel.Optimal))
{
compressor.Write(s_sampledata, 0, s_sampledata.Length);
compressor.Flush();
optimal = compressed.Length;
}
}
// Optimal compression should result in a smaller output stream than fastest
// and fastest should result in a smaller output stream than uncompressed
Assert.IsTrue(optimal < fastest);
Assert.IsTrue(fastest < source.Length);
}
}
public void Bzip2_Encoder()
{
// The Bzip2Encoder is just a wrapper around Bzip2Writer that provides
// more complete control over the compression/encoder parameters
Bzip2Encoder encoder = new Bzip2Encoder();
// Check the default values
Assert.AreEqual(65536, encoder.BufferSize);
Assert.AreEqual(Bzip2CompressionLevel.Default, encoder.CompressionLevel);
Assert.AreEqual(Bzip2WorkFactor.Default, encoder.WorkFactor);
// Set some bad values and ensure they are caught by the encoder property setters
try { encoder.BufferSize = -1; Assert.Fail("Property should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ArgumentOutOfRangeException)); }
try { encoder.CompressionLevel = -1; Assert.Fail("Property should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ArgumentOutOfRangeException)); }
try { encoder.CompressionLevel = 0; Assert.Fail("Property should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ArgumentOutOfRangeException)); }
try { encoder.CompressionLevel = 10; Assert.Fail("Property should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ArgumentOutOfRangeException)); }
try { encoder.WorkFactor = new Bzip2WorkFactor(-1); Assert.Fail("Property should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ArgumentOutOfRangeException)); }
try { encoder.WorkFactor = new Bzip2WorkFactor(251); Assert.Fail("Property should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ArgumentOutOfRangeException)); }
// Set some good values
encoder.BufferSize = 8192;
Assert.AreEqual(8192, encoder.BufferSize);
encoder.CompressionLevel = Bzip2CompressionLevel.Fastest;
Assert.AreEqual(Bzip2CompressionLevel.Fastest, encoder.CompressionLevel);
encoder.WorkFactor = 100;
Assert.AreEqual(100, encoder.WorkFactor);
// Check all of the Encoder methods work and encode as expected
byte[] expected, actual;
using (MemoryStream ms = new MemoryStream())
{
using (var writer = new Bzip2Writer(ms, CompressionLevel.Fastest, true)) writer.Write(s_sampledata, 0, s_sampledata.Length);
expected = ms.ToArray();
}
// Check parameter validations
try { actual = encoder.Encode((byte[])null); Assert.Fail("Method call should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ArgumentNullException)); }
try { actual = encoder.Encode((Stream)null); Assert.Fail("Method call should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ArgumentNullException)); }
try { actual = encoder.Encode(null, 0, 0); Assert.Fail("Method call should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ArgumentNullException)); }
try { encoder.Encode(s_sampledata, null); Assert.Fail("Method call should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ArgumentNullException)); }
try { encoder.Encode((byte[])null, new MemoryStream()); Assert.Fail("Method call should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ArgumentNullException)); }
try { encoder.Encode((byte[])null, 0, 0, new MemoryStream()); Assert.Fail("Method call should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ArgumentNullException)); }
try { encoder.Encode(s_sampledata, 0, s_sampledata.Length, (Stream)null); Assert.Fail("Method call should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ArgumentNullException)); }
try { encoder.Encode((Stream)null, new MemoryStream()); Assert.Fail("Method call should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ArgumentNullException)); }
try { encoder.Encode(new MemoryStream(), (Stream)null); Assert.Fail("Method call should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ArgumentNullException)); }
// Check actual encoding
actual = encoder.Encode(s_sampledata);
Assert.IsTrue(Enumerable.SequenceEqual(expected, actual));
actual = encoder.Encode(new MemoryStream(s_sampledata));
Assert.IsTrue(Enumerable.SequenceEqual(expected, actual));
actual = encoder.Encode(s_sampledata, 0, s_sampledata.Length);
Assert.IsTrue(Enumerable.SequenceEqual(expected, actual));
using (MemoryStream dest = new MemoryStream())
{
encoder.Encode(s_sampledata, dest);
Assert.IsTrue(Enumerable.SequenceEqual(expected, dest.ToArray()));
}
using (MemoryStream dest = new MemoryStream())
{
encoder.Encode(new MemoryStream(s_sampledata), dest);
Assert.IsTrue(Enumerable.SequenceEqual(expected, dest.ToArray()));
}
using (MemoryStream dest = new MemoryStream())
{
encoder.Encode(s_sampledata, 0, s_sampledata.Length, dest);
Assert.IsTrue(Enumerable.SequenceEqual(expected, dest.ToArray()));
}
}
public void Bzip2_Read()
{
byte[] buffer = new byte[8192]; // 8KiB data buffer
using (MemoryStream compressed = new MemoryStream())
{
// Start with a compressed MemoryStream created from the sample data
using (Bzip2Writer compressor = new Bzip2Writer(compressed, CompressionLevel.Optimal, true))
{
try { compressor.Read(buffer, 0, 8192); Assert.Fail("Method call should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(NotSupportedException)); }
compressor.Write(s_sampledata, 0, s_sampledata.Length);
compressor.Flush();
}
// Check the constructor for ArgumentNullException while we're here
try { using (Bzip2Reader decompressor = new Bzip2Reader(null, false)) { }; Assert.Fail("Constructor should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ArgumentNullException)); }
// Create a decompressor to test some of the error cases
using (Bzip2Reader decompressor = new Bzip2Reader(compressed, true))
{
// Send in some bum arguments to Read() to check they are caught
try { decompressor.Read(null, 0, 0); Assert.Fail("Method call should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ArgumentNullException)); }
try { decompressor.Read(buffer, -1, 0); Assert.Fail("Method call should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ArgumentOutOfRangeException)); }
try { decompressor.Read(buffer, 0, -1); Assert.Fail("Method call should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ArgumentOutOfRangeException)); }
try { decompressor.Read(buffer, 0, buffer.Length + 1024); Assert.Fail("Method call should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ArgumentException)); }
// Attempting to read from the end of the compressed stream should throw an InvalidDataException
try { decompressor.Read(buffer, 0, 8192); Assert.Fail("Method call should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(InvalidDataException)); }
// Attempting to read from the middle of the compressed stream should throw a Bzip2Exception
compressed.Position = compressed.Position / 2;
try { decompressor.Read(buffer, 0, 8192); Assert.Fail("Method call should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(Bzip2Exception)); }
// The decompression stream is trashed at this point since the input buffer was filled
// with data from the middle. Thought about a special case handler for that, but it's
// a fringe case. Verify that the stream is indeed trashed ...
compressed.Position = 0;
try { decompressor.Read(buffer, 0, 8192); Assert.Fail("Method call should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(Bzip2Exception)); }
}
// Create a new decompressor against the same stream and make sure it doesn't throw
using (Bzip2Reader decompressor = new Bzip2Reader(compressed, true))
{
// Reading zero bytes should not throw an exception
decompressor.Read(buffer, 0, 0);
while (decompressor.Read(buffer, 0, 8192) != 0)
{
}
}
}
}
public void Bzip2_WriterDispose()
{
byte[] buffer = new byte[8192]; // 8KiB data buffer
// Create a dummy stream and immediately dispose of it
Bzip2Writer stream = new Bzip2Writer(new MemoryStream(s_sampledata), CompressionLevel.Optimal);
stream.Dispose();
// Test double dispose
stream.Dispose();
// All properties and methods should throw an ObjectDisposedException
try { var bs = stream.BaseStream; Assert.Fail("Property access should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ObjectDisposedException)); }
try { var b = stream.CanRead; Assert.Fail("Property access should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ObjectDisposedException)); }
try { var b = stream.CanSeek; Assert.Fail("Property access should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ObjectDisposedException)); }
try { var b = stream.CanWrite; Assert.Fail("Property access should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ObjectDisposedException)); }
try { stream.Flush(); Assert.Fail("Method call should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ObjectDisposedException)); }
try { var l = stream.Length; Assert.Fail("Property access should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ObjectDisposedException)); }
try { var l = stream.Position; Assert.Fail("Property access should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ObjectDisposedException)); }
try { stream.Position = 12345L; Assert.Fail("Property access should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ObjectDisposedException)); }
try { stream.Read(buffer, 0, 8192); Assert.Fail("Method call should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ObjectDisposedException)); }
try { stream.Seek(0, SeekOrigin.Current); Assert.Fail("Method call should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ObjectDisposedException)); }
try { stream.SetLength(12345L); Assert.Fail("Method call should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ObjectDisposedException)); }
try { stream.Write(buffer); Assert.Fail("Method call should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ObjectDisposedException)); }
try { stream.Write(buffer, 0, 8192); Assert.Fail("Method call should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ObjectDisposedException)); }
// Ensure that an underlying stream is disposed of properly if leaveopen is not set
MemoryStream ms = new MemoryStream(s_sampledata);
using (Bzip2Writer compressor = new Bzip2Writer(ms, CompressionLevel.Fastest)) { }
try { ms.Write(buffer, 0, 8192); Assert.Fail("Method call should have thrown an exception"); }
catch (Exception ex) { Assert.IsInstanceOfType(ex, typeof(ObjectDisposedException)); }
// Ensure that an underlying stream is not disposed of if leaveopen is set
ms = new MemoryStream(s_sampledata);
using (Bzip2Writer compressor = new Bzip2Writer(ms, CompressionLevel.Fastest, true)) { }
ms.Write(buffer, 0, 8192);
ms.Dispose();
}
