public void Point2D_ArrayOfPoint()
{
var model = dynSettings.Controller.DynamoModel;
string openPath = Path.Combine(GetTestDirectory(), @"core\GeometryTestFiles\Point2D_ArrayOfPoint.dyn");
model.Open(openPath);
// check all the nodes and connectors are loaded
Assert.AreEqual(6, model.CurrentWorkspace.Nodes.Count);
Assert.AreEqual(5, model.CurrentWorkspace.Connectors.Count);
// run the expression
dynSettings.Controller.RunExpression(null);
// Verification for Point
Autodesk.LibG.Geometry geometry1 = null;
var getGeometry1 = model.CurrentWorkspace.NodeFromWorkspace <GetFromList>("b33aad81-94cc-4f8f-9580-51870b7e9363");
Assert.IsTrue(Utils.Convert(getGeometry1.GetValue(0), ref geometry1));
Autodesk.LibG.Point point = geometry1 as Autodesk.LibG.Point;
Assert.AreNotEqual(null, point);
double xValue = point.x();
double yValue = point.y();
Assert.AreEqual(10, xValue);
Assert.AreEqual(10, yValue);
}
public void LineTest()
{
var model = dynSettings.Controller.DynamoModel;
string openPath = Path.Combine(GetTestDirectory(), @"core\GeometryTestFiles\LineTest.dyn");
model.Open(openPath);
// check all the nodes and connectors are loaded
Assert.AreEqual(6, model.CurrentWorkspace.Nodes.Count);
Assert.AreEqual(9, model.CurrentWorkspace.Connectors.Count);
// run the expression
dynSettings.Controller.RunExpression(null);
// Verification for X coordinate of Point node.
Autodesk.LibG.Geometry geometry = null;
var getGeometry = model.CurrentWorkspace.NodeFromWorkspace <Point3DNode>("18dce051-d02c-4e24-b852-8626af14b2ea");
Assert.IsTrue(Utils.Convert(getGeometry.GetValue(0), ref geometry));
Autodesk.LibG.Point point = geometry as Autodesk.LibG.Point;
Assert.AreNotEqual(null, point);
Assert.AreEqual(0, point.x());
// Verification for Y coordinate of Point node.
Autodesk.LibG.Geometry geometry1 = null;
var getGeometry1 = model.CurrentWorkspace.NodeFromWorkspace <Point3DNode>("c231bff3-36d7-4171-bd28-21d5730ab230");
Assert.IsTrue(Utils.Convert(getGeometry1.GetValue(0), ref geometry1));
Autodesk.LibG.Point point1 = geometry1 as Autodesk.LibG.Point;
Assert.AreNotEqual(null, point1);
Assert.AreEqual(10, point1.x());
Autodesk.LibG.Geometry line = null;
var getGeometry2 = model.CurrentWorkspace.NodeFromWorkspace <LineNode>("6e53d1b5-d85a-47d7-a299-7bd031281363");
Assert.IsTrue(Utils.Convert(getGeometry2.GetValue(0), ref line));
// Verification for "Length" , "StartPoint" and "EndPoint" of Line.
Autodesk.LibG.Line line1 = line as Autodesk.LibG.Line;
Assert.AreEqual(0, line1.start_point().x());
Assert.AreEqual(10, line1.end_point().x());
Assert.AreEqual(10, line1.length());
}
public void Point3DTest()
{
var model = dynSettings.Controller.DynamoModel;
string openPath = Path.Combine(GetTestDirectory(), @"core\GeometryTestFiles\Point3DTest.dyn");
model.Open(openPath);
// check all the nodes and connectors are loaded
Assert.AreEqual(6, model.CurrentWorkspace.Nodes.Count);
Assert.AreEqual(6, model.CurrentWorkspace.Connectors.Count);
// run the expression
dynSettings.Controller.RunExpression(null);
// Verification for Point
Autodesk.LibG.Geometry geometry1 = null;
var getGeometry1 = model.CurrentWorkspace.NodeFromWorkspace <Point3DNode>("89653c21-d76b-45c6-ab5e-9160ea0a0e06");
Assert.IsTrue(Utils.Convert(getGeometry1.GetValue(0), ref geometry1));
Autodesk.LibG.Point point = geometry1 as Autodesk.LibG.Point;
Assert.AreNotEqual(null, point);
double xValue = point.x();
double yValue = point.y();
double zValue = point.z();
Assert.AreEqual(0, xValue);
Assert.AreEqual(3.14159265358979, yValue);
Assert.AreEqual(3.14159265358979, zValue);
// Property Node tests.
var xProperty = model.CurrentWorkspace.NodeFromWorkspace <PointXNode>("935b53bb-535a-4b32-aff8-3b9dbf72869d");
Assert.AreEqual(xValue, xProperty.GetValue(0).GetDoubleFromFSchemeValue());
var yProperty = model.CurrentWorkspace.NodeFromWorkspace <PointYNode>("36de2412-ad63-465d-b19a-719a0eb7f648");
Assert.AreEqual(yValue, yProperty.GetValue(0).GetDoubleFromFSchemeValue());
var zProperty = model.CurrentWorkspace.NodeFromWorkspace <PointZNode>("175727bd-d9f4-4b54-bb2a-f608967e203d");
Assert.AreEqual(zValue, zProperty.GetValue(0).GetDoubleFromFSchemeValue());
}
public void PointAtUVParameterTest()
{
var model = dynSettings.Controller.DynamoModel;
string openPath = Path.Combine(GetTestDirectory(), @"core\GeometryTestFiles\PointAtUVParameterTest.dyn");
model.Open(openPath);
// check all the nodes and connectors are loaded
Assert.AreEqual(51, model.CurrentWorkspace.Nodes.Count);
Assert.AreEqual(69, model.CurrentWorkspace.Connectors.Count);
// run the expression
dynSettings.Controller.RunExpression(null);
// Verification for Point which is created using PointAtUVParameter node.
Autodesk.LibG.Geometry geometry1 = null;
var getGeometry1 = model.CurrentWorkspace.NodeFromWorkspace <GetFromList>("f467baf4-2bac-4c6f-a31e-d33016571bf5");
Assert.IsTrue(Utils.Convert(getGeometry1.GetValue(0), ref geometry1));
Autodesk.LibG.Point point = geometry1 as Autodesk.LibG.Point;
Assert.AreNotEqual(null, point);
double xValue = point.x();
double yValue = point.y();
double zValue = point.z();
Assert.AreEqual(-6.3977743135825484, xValue);
Assert.AreEqual(-16.869544438947674, yValue);
Assert.AreEqual(-10.633850246828377, zValue);
//Autodesk.LibG.Geometry pointAtDistance = null;
//var pointAtDistance1 = model.CurrentWorkspace.NodeFromWorkspace<PointAtUvParameterNode>("877369eb-1b97-4d05-a4d4-61d37b803562");
//Assert.IsTrue(Utils.Convert(pointAtDistance1.GetValue(0), ref pointAtDistance));
//Autodesk.LibG.Point point1 = pointAtDistance as Autodesk.LibG.Point;
}
public void PointAtDistanceTest()
{
var model = dynSettings.Controller.DynamoModel;
string openPath = Path.Combine(GetTestDirectory(), @"core\GeometryTestFiles\PointAtDistanceTest.dyn");
model.Open(openPath);
// check all the nodes and connectors are loaded
Assert.AreEqual(29, model.CurrentWorkspace.Nodes.Count);
Assert.AreEqual(36, model.CurrentWorkspace.Connectors.Count);
// run the expression
dynSettings.Controller.RunExpression(null);
// Verification for Point created using PointAtDistance node.
Autodesk.LibG.Geometry geometry1 = null;
var getGeometry1 = model.CurrentWorkspace.NodeFromWorkspace <GetFromList>("5f48e595-d2cd-485f-99a1-dc0abe364ed3");
Assert.IsTrue(Utils.Convert(getGeometry1.GetValue(0), ref geometry1));
Autodesk.LibG.Point point = geometry1 as Autodesk.LibG.Point;
Assert.AreNotEqual(null, point);
double xValue = point.x();
double yValue = point.y();
double zValue = point.z();
Assert.AreEqual(10, xValue);
Assert.AreEqual(5.5978213925456739, yValue);
Assert.AreEqual(-2.506439789083756, zValue);
//Autodesk.LibG.Geometry pointAtDistance = null;
//var pointAtDistance1 = model.CurrentWorkspace.NodeFromWorkspace<PointAtDistanceNode>("877369eb-1b97-4d05-a4d4-61d37b803562");
//Assert.IsTrue(Utils.Convert(pointAtDistance1.GetValue(0), ref pointAtDistance));
//Autodesk.LibG.Point point1 = pointAtDistance as Autodesk.LibG.Point;
}
public void CircleTest()
{
var model = dynSettings.Controller.DynamoModel;
string openPath = Path.Combine(GetTestDirectory(), @"core\GeometryTestFiles\CircleTest.dyn");
model.Open(openPath);
// check all the nodes and connectors are loaded
Assert.AreEqual(7, model.CurrentWorkspace.Nodes.Count);
Assert.AreEqual(10, model.CurrentWorkspace.Connectors.Count);
// run the expression
dynSettings.Controller.RunExpression(null);
// Verification for X coordinate of CenterPoint node.
Autodesk.LibG.Geometry geometry1 = null;
var getGeometry1 = model.CurrentWorkspace.NodeFromWorkspace <Point3DNode>("753356e5-4025-46b9-a688-8a2e20e482fc");
Assert.IsTrue(Utils.Convert(getGeometry1.GetValue(0), ref geometry1));
Autodesk.LibG.Point point1 = geometry1 as Autodesk.LibG.Point;
Assert.AreNotEqual(null, point1);
Assert.AreEqual(0, point1.x());
// Verification for Circle node.
Autodesk.LibG.Geometry geometry = null;
var getGeometry = model.CurrentWorkspace.NodeFromWorkspace <CircleNode>("3382f192-30e7-49bf-92f0-c24504d498b5");
Assert.IsTrue(Utils.Convert(getGeometry.GetValue(0), ref geometry));
Autodesk.LibG.Circle circle = geometry as Autodesk.LibG.Circle;
Assert.AreNotEqual(null, circle);
//Assert.AreEqual(point1, circle.center_point());
Assert.AreEqual(0, circle.center_point().x());
}
public override Value Evaluate(FSharpList <Value> args)
{
Autodesk.LibG.Geometry geometry = (Autodesk.LibG.Geometry)((Value.Container)args[0]).Item;
Autodesk.LibG.Point point = geometry as Autodesk.LibG.Point;
if (point != null)
{
XYZ xyz = new XYZ(point.x(), point.y(), point.z());
if (_revitPoint == null)
{
_revitPoint = this.UIDocument.Document.FamilyCreate.NewReferencePoint(xyz);
this.Elements.Add(_revitPoint.Id);
}
else
{
_revitPoint.Position = xyz;
}
return(Value.NewContainer(_revitPoint));
}
Autodesk.LibG.Line line = geometry as Autodesk.LibG.Line;
if (line != null)
{
ReferencePointArray refPoints = new ReferencePointArray();
Autodesk.LibG.Point start_point = line.start_point();
Autodesk.LibG.Point end_point = line.end_point();
if (_curveByPoints == null)
{
_startPoint = ReferencePointFromPoint(start_point);
_endPoint = ReferencePointFromPoint(end_point);
refPoints.Append(_startPoint);
refPoints.Append(_endPoint);
_curveByPoints = this.UIDocument.Document.FamilyCreate.NewCurveByPoints(refPoints);
this.Elements.Add(_curveByPoints.Id);
}
else
{
_startPoint.Position = new XYZ(start_point.x(), start_point.y(), start_point.z());
_endPoint.Position = new XYZ(end_point.x(), end_point.y(), end_point.z());
}
return(Value.Container.NewContainer(_curveByPoints));
}
//Autodesk.LibG.BSplineCurve bspline = geometry as Autodesk.LibG.BSplineCurve;
//if (bspline != null)
//{
// ReferencePointArray refPoints = new ReferencePointArray();
// for (int i = 0; i <= 15; ++i)
// {
// double param = (double)i / 15.0;
// Autodesk.LibG.Point p = bspline.point_at_parameter(param);
// ReferencePoint refPoint = ReferencePointFromPoint(p);
// refPoints.Append(refPoint);
// }
// if (_curveByPoints == null)
// {
// _curveByPoints = this.UIDocument.Document.FamilyCreate.NewCurveByPoints(refPoints);
// this.Elements.Add(_curveByPoints.Id);
// }
// else
// {
// _curveByPoints.SetPoints(refPoints);
// }
// foreach (ReferencePoint refPoint in refPoints)
// {
// refPoint.Visible = false;
// }
// return Value.Container.NewContainer(_curveByPoints);
//}
return(Value.Container.NewContainer(null));
// Surface
// Solid
}
private ReferencePoint ReferencePointFromPoint(Autodesk.LibG.Point point)
{
XYZ xyz = new XYZ(point.x(), point.y(), point.z());
return(this.UIDocument.Document.FamilyCreate.NewReferencePoint(xyz));
}
