public override void Init()
{
//委托事件实现
var heater = new Heater();
heater.OnBoiled += new AlarmObserver().Alert;
heater.OnBoiled += new ScreenObserver().Show;
heater.BoilWater();
//IObservable<>和IObserver<>实现
var subject = new Ammeter();
var alarm = new MeterAlarm();
var sms = new MeterSMS();
alarm.Subscribe(subject);
sms.Subscribe(subject);
subject.Publish();
alarm.Unsubscribe();
subject.Publish();
alarm.Subscribe(subject);
sms.Unsubscribe();
subject.Publish();
}
public void AddAmmeter()
{
var temp = new Ammeter(4);
CreatePairForElement(temp);
ContextMenuManager.Instance.ContextMenuActive = false;
}
/// <summary>
/// 1.0和0.1都用同一种协议解析
/// </summary>
private void analysis1_0or0_1()
{
int alllength = (int)SystemCode.HexNumberToDenary(this.messageContent.Substring(2 * 2, 2 * 2), true, 32, 'u') * 2;
if (this.messageContent.Length >= (istart + icount) && alllength == (this.messageContent.Length - 2 * 2))
{
messageHeader = new TcpHeader();
messageHeader.analyze(this.messageContent.Substring(istart, icount));
istart = istart + icount;
//循环解析多个设备
listTcpbody = new List<DeviceDataBase>();
for (int i = 0; i < this.messageHeader.DevicesNum; i++)
{
DeviceDataBase ddb = null;
if (istart > messageContent.Length)
break;
int type = (int)SystemCode.HexNumberToDenary(this.messageContent.Substring(istart + 2 * 2, 1 * 2), true, 32, 'u');
switch (type)
{
case DeviceData.TYPE_MODBUS_BUSBAR://modbus协议汇流箱
icount = ProtocolConst.LENGTH_MODBUS_BUSBAR * 2;
if (istart + icount > this.messageContent.Length)
{
istart = istart + icount;
break;
}
else
{
ddb = new ModbusBusbar(this.messageContent.Substring(istart, icount), this);
istart = istart + icount;
break;
}
case DeviceData.TYPE_MODBUS15_BUSBAR://光伏阵列汇流箱通讯协议（Modbus）V1.1.1.0-2011.8.30.pdf add by qianhb in 20111220
icount = ProtocolConst.LENGTH_MODBUS15_BUSBAR * 2;
if (istart + icount > this.messageContent.Length)
{
istart = istart + icount;
break;
}
else
{
ddb = new Modbus15Busbar(this.messageContent.Substring(istart, icount), this);
istart = istart + icount;
break;
}
case DeviceData.TYPE_MODBUS_CABINET://modbus协议配电柜
icount = ProtocolConst.LENGTH_MODBUS_CABINET * 2;
if (istart + icount > this.messageContent.Length)
{
istart = istart + icount;
break;
}
else
{
ddb = new ModbusCabinet(this.messageContent.Substring(istart, icount), this);
istart = istart + icount;
break;
}
case DeviceData.TYPE_MODBUS16_CABINET://光伏直流配电柜通信协议（Modbus）V1.0-柴达木-2011.8.30.pdf add by qianhb in 20111220
icount = ProtocolConst.LENGTH_MODBUS16_CABINET * 2;
if (istart + icount > this.messageContent.Length)
{
istart = istart + icount;
break;
}
else
{
ddb = new Modbus16Cabinet(this.messageContent.Substring(istart, icount), this);
istart = istart + icount;
break;
}
case DeviceData.TYPE_MODBUS_DETECTOR://设备类型0x22对应的数据区格式,环境检测仪（MODBUS协议） add by qianhb in 20111220
icount = ProtocolConst.LENGTH_MODBUS_DETECTOR * 2;
if (istart + icount > this.messageContent.Length)
{
istart = istart + icount;
break;
}
else
{
ddb = new ModbusDetector(this.messageContent.Substring(istart, icount), this);
istart = istart + icount;
break;
}
case DeviceData.TYPE_MODBUS_DETECTOR_V1020://设备类型0x23对应的数据区格式,环境检测仪（MODBUS协议） add by qianhb in 20120314
icount = ProtocolConst.LENGTH_MODBUS_DETECTOR_1020 * 2;
if (istart + icount > this.messageContent.Length)
{
istart = istart + icount;
break;
}
else
{
ddb = new ModbusDetector1020(this.messageContent.Substring(istart, icount), this);
istart = istart + icount;
break;
}
case DeviceData.TYPE_MODBUS_INVERTER://modbus协议逆变器
icount = ProtocolConst.LENGTH_MODBUS_INVERTER * 2;
if (istart + icount > this.messageContent.Length)
{
istart = istart + icount;
break;
}
else
{
ddb = new ModbusInverter(this.messageContent.Substring(istart, icount),this);
istart = istart + icount;
break;
}
case DeviceData.TYPE_SUNGROW_BUSBAR://sungrows协议汇流箱
icount = ProtocolConst.LENGTH_SUNGROW_BUSBAR * 2;
if (istart + icount > this.messageContent.Length)
{
istart = istart + icount;
break;
}
else
{
ddb = new SungrowBusbar(this.messageContent.Substring(istart, icount), this);
istart = istart + icount;
break;
}
case DeviceData.TYPE_SUNGROW_CABINET://sungrows协议配电柜
icount = ProtocolConst.LENGTH_SUNGROW_CABINET * 2;
if (istart + icount > this.messageContent.Length)
{
istart = istart + icount;
break;
}
else
{
ddb = new SungrowCabinet(this.messageContent.Substring(istart, icount), this);
istart = istart + icount;
break;
}
case DeviceData.TYPE_SUNGROW_DETECTOR://sungrow协议检测仪
icount = ProtocolConst.LENGTH_SUNGROW_DETECTOR * 2;
if (istart + icount > this.messageContent.Length)
{
istart = istart + icount;
break;
}
else
{
ddb = new SungrowDetector(this.messageContent.Substring(istart, icount), this);
istart = istart + icount;
break;
}
case DeviceData.TYPE_SUNGROW_INVERTER://sungrow协议逆变器
icount = ProtocolConst.LENGTH_SUNGROW_INVERTER * 2;
if (istart + icount > this.messageContent.Length)
{
istart = istart + icount;
break;
}
else
{
ddb = new SungrowInverter(this.messageContent.Substring(istart, icount),this);
istart = istart + icount;
break;
}
case DeviceData.TYPE_AMMETER://电表协议
icount = ProtocolConst.LENGTH_AMMETER * 2;
if (istart + icount > this.messageContent.Length)
{
istart = istart + icount;
break;
}
else
{
ddb = new Ammeter(this.messageContent.Substring(istart, icount), this);
istart = istart + icount;
break;
}
default:
istart = istart + this.messageContent.Length;
break;
}
if (ddb != null)
listTcpbody.Add(ddb);
}
//取得告警信息
listTcpbug = new List<Bug>();
if (this.messageContent.Length > (ProtocolConst.LENGTH_BUG + ProtocolConst.LENGTH_HEAD) * 2)
{
istart = this.messageContent.Length - ProtocolConst.LENGTH_BUG * 2 * (this.messageHeader.BugNum);
for (int i = 0; i < this.messageHeader.BugNum; i++)
{
Bug tcpb = new TcpBug(this.messageContent.Substring(istart + i * ProtocolConst.LENGTH_BUG * 2, ProtocolConst.LENGTH_BUG * 2));
listTcpbug.Add(tcpb);
}
}
}
else
{
base.messageHeader = new TcpHeader();
listTcpbody = new List<DeviceDataBase>();
listTcpbug = new List<Bug>();
}
}
/// <summary>
/// 1.0和0.1都用同一种协议解析
/// </summary>
private void analysis1_0or0_1()
{
int alllength = (int)SystemCode.HexNumberToDenary(this.messageContent.Substring(2 * 2, 2 * 2), true, 32, 'u') * 2;
if (this.messageContent.Length >= (istart + icount) && alllength == (this.messageContent.Length - 2 * 2))
{
messageHeader = new TcpHeader();
messageHeader.analyze(this.messageContent.Substring(istart, icount));
//add by hbqian int 20130418 for其实0。1分的发电量是昨天，按道理不应该发的，但是现在LOG有个换存，导致0：到15分的这个时间发的发电量可能还是上一天的
if (messageHeader.TimeNow.Hour == 0 && messageHeader.TimeNow.Minute < 15)
{
return;
}
istart = istart + icount;
//循环解析多个设备
listTcpbody = new List <DeviceDataBase>();
for (int i = 0; i < this.messageHeader.DevicesNum; i++)
{
DeviceDataBase ddb = null;
if (istart > messageContent.Length)
{
break;
}
int type = (int)SystemCode.HexNumberToDenary(this.messageContent.Substring(istart + 2 * 2, 1 * 2), true, 32, 'u');
switch (type)
{
case DeviceData.TYPE_MODBUS_BUSBAR: //modbus协议汇流箱
icount = ProtocolConst.LENGTH_MODBUS_BUSBAR * 2;
if (istart + icount > this.messageContent.Length)
{
istart = istart + icount;
break;
}
else
{
ddb = new ModbusBusbar(this.messageContent.Substring(istart, icount), this);
istart = istart + icount;
break;
}
case DeviceData.TYPE_MODBUS15_BUSBAR: //光伏阵列汇流箱通讯协议（Modbus）V1.1.1.0-2011.8.30.pdf add by qianhb in 20111220
icount = ProtocolConst.LENGTH_MODBUS15_BUSBAR * 2;
if (istart + icount > this.messageContent.Length)
{
istart = istart + icount;
break;
}
else
{
ddb = new Modbus15Busbar(this.messageContent.Substring(istart, icount), this);
istart = istart + icount;
break;
}
case DeviceData.TYPE_MODBUS17_BUSBAR: //光伏汇流箱通信协议（Modbus）V1.7设置定稿.doc add by ZHOUHUI in 20121118
icount = ProtocolConst.LENGTH_MODBUS17_BUSBAR * 2;
if (istart + icount > this.messageContent.Length)
{
istart = istart + icount;
break;
}
else
{
ddb = new Modbus17Busbar(this.messageContent.Substring(istart, icount), this);
istart = istart + icount;
break;
}
case DeviceData.TYPE_MODBUS_CABINET: //modbus协议配电柜
icount = ProtocolConst.LENGTH_MODBUS_CABINET * 2;
if (istart + icount > this.messageContent.Length)
{
istart = istart + icount;
break;
}
else
{
ddb = new ModbusCabinet(this.messageContent.Substring(istart, icount), this);
istart = istart + icount;
break;
}
case DeviceData.TYPE_MODBUS16_CABINET: //光伏直流配电柜通信协议（Modbus）V1.0-柴达木-2011.8.30.pdf add by qianhb in 20111220
icount = ProtocolConst.LENGTH_MODBUS16_CABINET * 2;
if (istart + icount > this.messageContent.Length)
{
istart = istart + icount;
break;
}
else
{
ddb = new Modbus16Cabinet(this.messageContent.Substring(istart, icount), this);
istart = istart + icount;
break;
}
case DeviceData.TYPE_MODBUS_DETECTOR: //设备类型0x22对应的数据区格式,环境检测仪（MODBUS协议） add by qianhb in 20111220
icount = ProtocolConst.LENGTH_MODBUS_DETECTOR * 2;
if (istart + icount > this.messageContent.Length)
{
istart = istart + icount;
break;
}
else
{
ddb = new ModbusDetector(this.messageContent.Substring(istart, icount), this);
istart = istart + icount;
break;
}
case DeviceData.TYPE_MODBUS_DETECTOR_V1020: //设备类型0x23对应的数据区格式,环境检测仪（MODBUS协议） add by qianhb in 20120314
icount = ProtocolConst.LENGTH_MODBUS_DETECTOR_1020 * 2;
if (istart + icount > this.messageContent.Length)
{
istart = istart + icount;
break;
}
else
{
ddb = new ModbusDetector1020(this.messageContent.Substring(istart, icount), this);
istart = istart + icount;
break;
}
case DeviceData.TYPE_MODBUS_INVERTER: //modbus协议逆变器
icount = ProtocolConst.LENGTH_MODBUS_INVERTER * 2;
if (istart + icount > this.messageContent.Length)
{
istart = istart + icount;
break;
}
else
{
ddb = new ModbusInverter(this.messageContent.Substring(istart, icount), this);
istart = istart + icount;
break;
}
case DeviceData.TYPE_MODBUS_INVERTER03: //modbus协议逆变器03，由于03协议只是在02基础上增加数据，前面完全一样，对于新增的数据不处理，所以暂用02协议解析类处理
icount = ProtocolConst.LENGTH_MODBUS_INVERTER03 * 2;
if (istart + icount > this.messageContent.Length)
{
istart = istart + icount;
break;
}
else
{
ddb = new ModbusInverter03(this.messageContent.Substring(istart, icount), this);
istart = istart + icount;
break;
}
case DeviceData.TYPE_SUNGROW_BUSBAR: //sungrows协议汇流箱
icount = ProtocolConst.LENGTH_SUNGROW_BUSBAR * 2;
if (istart + icount > this.messageContent.Length)
{
istart = istart + icount;
break;
}
else
{
ddb = new SungrowBusbar(this.messageContent.Substring(istart, icount), this);
istart = istart + icount;
break;
}
case DeviceData.TYPE_SUNGROW_CABINET: //sungrows协议配电柜
icount = ProtocolConst.LENGTH_SUNGROW_CABINET * 2;
if (istart + icount > this.messageContent.Length)
{
istart = istart + icount;
break;
}
else
{
ddb = new SungrowCabinet(this.messageContent.Substring(istart, icount), this);
istart = istart + icount;
break;
}
case DeviceData.TYPE_SUNGROW_DETECTOR: //sungrow协议检测仪
icount = ProtocolConst.LENGTH_SUNGROW_DETECTOR * 2;
if (istart + icount > this.messageContent.Length)
{
istart = istart + icount;
break;
}
else
{
ddb = new SungrowDetector(this.messageContent.Substring(istart, icount), this);
istart = istart + icount;
break;
}
case DeviceData.TYPE_SUNGROW_INVERTER: //sungrow协议逆变器
icount = ProtocolConst.LENGTH_SUNGROW_INVERTER * 2;
if (istart + icount > this.messageContent.Length)
{
istart = istart + icount;
break;
}
else
{
ddb = new SungrowInverter(this.messageContent.Substring(istart, icount), this);
istart = istart + icount;
break;
}
case DeviceData.TYPE_AMMETER: //电表协议
icount = ProtocolConst.LENGTH_AMMETER * 2;
if (istart + icount > this.messageContent.Length)
{
istart = istart + icount;
break;
}
else
{
ddb = new Ammeter(this.messageContent.Substring(istart, icount), this);
istart = istart + icount;
break;
}
case DeviceData.TYPE_AMMETER_11: //电表协议1.1
icount = ProtocolConst.LENGTH_AMMETER_11 * 2;
if (istart + icount > this.messageContent.Length)
{
istart = istart + icount;
break;
}
else
{
ddb = new Ammeter11(this.messageContent.Substring(istart, icount), this);
istart = istart + icount;
break;
}
default:
istart = istart + this.messageContent.Length;
break;
}
if (ddb != null)
{
listTcpbody.Add(ddb);
}
}
//取得告警信息
listTcpbug = new List <Bug>();
int faultInfoLength = getFaultInfoLength();
if (this.messageContent.Length > (faultInfoLength + ProtocolConst.LENGTH_HEAD) * 2)
{
istart = this.messageContent.Length - faultInfoLength * 2 * (this.messageHeader.BugNum);
for (int i = 0; i < this.messageHeader.BugNum; i++)
{
string bugmsg = this.messageContent.Substring(istart + i * faultInfoLength * 2, faultInfoLength * 2);
try
{
Bug tcpb = parseBug(bugmsg);
listTcpbug.Add(tcpb);
}
catch (Exception buge) {
LogUtil.error("告警信息解析错误：" + bugmsg + ":" + buge.Message);
}
}
}
}
else
{
base.messageHeader = new TcpHeader();
listTcpbody = new List <DeviceDataBase>();
listTcpbug = new List <Bug>();
}
}
public void AddAmmeter()
{
var temp = new Ammeter(4);
CreatePairForElement(temp);
ContextMenuManager.Instance.ContextMenuActive = false;
}
void Update()
{
#region cam control
float rx, ry;
rx = cam.transform.rotation.eulerAngles.x;
ry = cam.transform.rotation.eulerAngles.y;
if (Input.GetMouseButton(1))
{
rx -= Input.GetAxis("Mouse Y") * rotateSpeed;
ry += Input.GetAxis("Mouse X") * rotateSpeed;
}
cam.transform.rotation = Quaternion.Euler(rx, ry, 0);
Vector3 camMove = new Vector3(Input.GetAxis("Horizontal") * moveSpeedXY - ((Input.GetMouseButton(2)) ? Input.GetAxis("Mouse X") : 0) * moveSpeedXMouse, -((Input.GetMouseButton(2)) ? Input.GetAxis("Mouse Y") : 0) * moveSpeedYMouse, Input.GetAxis("Vertical") * moveSpeedXY + Input.GetAxis("Mouse ScrollWheel") * moveSpeedZ);
cam.transform.Translate(camMove);
#endregion
if (Input.GetMouseButtonDown(0))//select
{
mouseLastPos = Input.mousePosition;
Ray ray = cam.GetComponent <Camera>().ScreenPointToRay(Input.mousePosition);
RaycastHit hit;
if (Physics.Raycast(ray, out hit, 500))
{
electronicComponent curSelect = hit.collider.gameObject.GetComponent <electronicComponent>();
if (curSelect != null)
{
if (Input.GetKey(KeyCode.LeftControl) || Input.GetKey(KeyCode.RightControl))
{
if (selectedList.Contains(curSelect))
{
curSelect.unselect();
selectedList.Remove(curSelect);
}
else
{
curSelect.select();
selectedList.Add(curSelect);
}
}
else
{
foreach (electronicComponent c in selectedList)
{
c.unselect();
}
selectedList.Clear();
//select a wireNet
if (Input.GetKey(KeyCode.LeftShift) || Input.GetKey(KeyCode.RightShift))
{
if (curSelect.GetType() == typeof(Wire))
{
foreach (electronicComponent c in ((Wire)curSelect).wireNet.wires)
{
c.select();
selectedList.Add(c);
}
foreach (electronicComponent c in ((Wire)curSelect).wireNet.intersections)
{
c.select();
selectedList.Add(c);
}
}
if (curSelect.GetType() == typeof(Intersection))
{
foreach (electronicComponent c in ((Intersection)curSelect).wireNet.wires)
{
c.select();
selectedList.Add(c);
}
foreach (electronicComponent c in ((Intersection)curSelect).wireNet.intersections)
{
c.select();
selectedList.Add(c);
}
}
}
else
{
curSelect.select();
selectedList.Add(curSelect);
}
}
}
else
{
foreach (electronicComponent c in selectedList)
{
c.unselect();
}
selectedList.Clear();
}
}
else
{
foreach (electronicComponent c in selectedList)
{
c.unselect();
}
selectedList.Clear();
}
}
if (Input.GetMouseButton(0))//drag
{
foreach (electronicComponent c in selectedList)
{
c.move(mousePos(selectedList[selectedList.Count - 1].gameObject.transform.position.y, Input.mousePosition) - mousePos(selectedList[selectedList.Count - 1].gameObject.transform.position.y, mouseLastPos), Input.GetKey(KeyCode.LeftAlt)?0:snapGap);
}
}
if (Input.GetMouseButtonUp(0))//drag
{
foreach (electronicComponent c in selectedList)
{
c.OnMouseRelease();
}
}
#region create/delete components
if (Input.GetKeyDown(KeyCode.Delete))
{
foreach (electronicComponent c in selectedList)
{
Data.Remove(c); c.delete();
}
selectedList.Clear();
reArrangeWireNets();
}
if (Input.GetKeyDown(KeyCode.P))
{
InitializeComponent(Instantiate(power));
}
if (Input.GetKeyDown(KeyCode.R))
{
InitializeComponent(Instantiate(resistance));
}
if (Input.GetKeyDown(KeyCode.C))
{
InitializeComponent(Instantiate(capacitance));
}
if (Input.GetKeyDown(KeyCode.L))
{
InitializeComponent(Instantiate(inductor));
}
if (Input.GetKeyDown(KeyCode.I))
{
GameObject newObject = Instantiate(intersection);
Intersection script = (Intersection)newObject.GetComponent <electronicComponent>();
newObject.transform.position = mousePos(0, Input.mousePosition);
script.create(this);
foreach (electronicComponent c in selectedList)
{
c.unselect();
}
selectedList.Clear();
newObject.GetComponent <electronicComponent>().select();
selectedList.Add(newObject.GetComponent <electronicComponent>());
reArrangeWireNets();
}
if (Input.GetKeyDown(KeyCode.X))
{
if (selectedList.Count == 2)
{
bool t = true;
foreach (electronicComponent c in selectedList)
{
if (c.n_emptyConnect() < 1)
{
t = false;
}
}
if (t)
{
GameObject newObject = Instantiate(wire);
newObject.GetComponent <electronicComponent>().create(this);
Wire wireScript = newObject.GetComponent <Wire>();
wireScript.addConnection(selectedList[0]);
wireScript.addConnection(selectedList[1]);
selectedList[0].addConnection(wireScript);
selectedList[1].addConnection(wireScript);
foreach (electronicComponent c in selectedList)
{
c.unselect();
}
selectedList.Clear();
newObject.GetComponent <electronicComponent>().select();
selectedList.Add(newObject.GetComponent <electronicComponent>());
reArrangeWireNets();
}
}
}
if (Input.GetKeyDown(KeyCode.V))
{
if (selectedList.Count == 2)
{
bool t = true;
foreach (electronicComponent c in selectedList)
{
if (c.GetType() != typeof(Wire))
{
t = false;
}
}
if (t)
{
GameObject newObject = Instantiate(voltmeter);
Voltmeter script = newObject.GetComponent <Voltmeter>();
script.create_(this, (Wire)selectedList[0], (Wire)selectedList[1]);
}
}
}
if (Input.GetKeyDown(KeyCode.A))
{
if (selectedList.Count == 1)
{
if (selectedList[0].GetType() != typeof(Wire))
{
GameObject newObject = Instantiate(ammeter);
Ammeter script = newObject.GetComponent <Ammeter>();
script.create_(this, selectedList[0]);
}
}
}
if (Input.GetKey(KeyCode.Escape))
{
foreach (WireNet c in FindObjectsOfType <WireNet>())
{
c.Reset();
}
foreach (Capacitance c in FindObjectsOfType <Capacitance>())
{
c.Reset();
}
}
#endregion
mouseLastPos = Input.mousePosition;
}
