public bool OpenDevice()
{
m_adamSocket = new AdamSocket(m_adamType);
m_adamSocket.SetTimeout(m_iTimeout[0], m_iTimeout[1], m_iTimeout[2]);
if (m_adamSocket.Connect(m_szIP, protoType, portNum))
{
if (!m_adamSocket.Configuration().GetSlotInfo(out m_szSlots))
{
this.StatusBar_IO.Text = "GetSlotInfo() Failed! ";
return(false);
}
}
return(true);
}
/// <summary>
/// Used for change I/O module
/// </summary>
/// <returns></returns>
public bool FreeResource()
{
if (m_bStartFlag)
{
m_bStartFlag = false;
this.tabControl1.Enabled = false;
this.tabControl1.Visible = false;
timer1.Enabled = false;
m_adamSocket.Configuration().SYS_SetLocateModule(m_idxID, 0);
m_adamSocket.Disconnect();
m_adamSocket = null;
}
return(true);
}
/// <summary>
/// Refresh I/O modules of this controller and show controller information
/// </summary>
/// <param name="e"></param>
private void AfterSelect_CouplerDevice(TreeNode e)
{
TreeNode adamNode;
m_adamModbusSocket = new AdamSocket(adamType);
m_adamModbusSocket.SetTimeout(m_iTimeout[0], m_iTimeout[1], m_iTimeout[2]);
if (m_adamModbusSocket.Connect(m_szIP, protoType, portNum))
{
if (m_adamModbusSocket.RefreshIOInfo())
{
Thread waitThread = new Thread(ShowWaitMsg);
waitThread.Start();
m_adamModbusSocket.Configuration().GetSlotInfo(out m_szSlotInfo);
//
treeView1.BeginUpdate();
e.Nodes.Clear();
for (int iCnt = 0; iCnt < m_szSlotInfo.Length; iCnt++)
{
if (m_szSlotInfo[iCnt] != null)
{
adamNode = new TreeNode(m_szSlotInfo[iCnt] + "(S" + iCnt.ToString() + ")");
adamNode.Tag = (byte)iCnt;
e.Nodes.Add(adamNode);
}
}
e.ExpandAll();
treeView1.EndUpdate();
m_adamModbusSocket.GetDSPFWVer(ref m_sDSPFWVer);
m_adamModbusSocket.Disconnect();
}
}
else
{
MessageBox.Show("Connection error ( Err : " + m_adamModbusSocket.LastError.ToString() + " ). Please check the network setting.", "Error");
m_adamModbusSocket.Disconnect();
m_adamModbusSocket = null;
return;
}
RefreshConfiguration();
m_adamModbusSocket = null;
}
private bool GetSerialComPortTcpPortMapping(int i_intSlotId, out int[] o_tcpPortMappingAry)
{
AdamSocket adamSocket = new AdamSocket(AdamType.Apax5070);
bool bRet = false;
o_tcpPortMappingAry = new int[4];
if (adamSocket.Connect(m_szIP, ProtocolType.Udp, ASCII_CMD_UDP_PORT))
{
adamSocket.SetTimeout(m_iTimeout[0], m_iTimeout[1], m_iTimeout[2]);
bRet = adamSocket.Configuration().GetModuleCOMTcpPortMapping(i_intSlotId, out o_tcpPortMappingAry);
}
else
{
//MessageBox.Show("Failed to connect module!", "Error", MessageBoxButtons.OK, MessageBoxIcon.Error, MessageBoxDefaultButton.Button1);
bRet = false;
}
adamSocket.Disconnect();
adamSocket = null;
return(bRet);
}
public AdamRetriever(int sensorNum)
{
sensorStatus = "false";
sensorNumber = sensorNum;
m_bStart = false; // the action stops at the beginning
m_szIP = "192.168.10.10"; // modbus slave IP address
m_iPort = 502; // modbus TCP port is 502
adamModbus = new AdamSocket();
adamModbus.SetTimeout(1000, 1000, 1000); // set timeout for TCP
adamUDP = new AdamSocket();
adamUDP.SetTimeout(1000, 1000, 1000); // set timeout for UDP
m_Adam6000Type = Adam6000Type.Adam6015; // the sample is for ADAM-6015
adamUDP.Connect(AdamType.Adam6000, m_szIP, ProtocolType.Udp);
if (adamUDP.Configuration().GetFirmwareVer(out m_szFwVersion))
{
m_DeviceFwVer = int.Parse(m_szFwVersion.Trim().Substring(0, 1));
}
adamUDP.Disconnect();
m_iAiTotal = AnalogInput.GetChannelTotal(m_Adam6000Type);
m_iDoTotal = DigitalOutput.GetChannelTotal(m_Adam6000Type);
//txtModule.Text = m_Adam6000Type.ToString();
m_bChEnabled = new bool[m_iAiTotal];
//firmware version
//fwversion.Text = m_DeviceFwVer.ToString();
if (m_DeviceFwVer > m_Adam6000NewerFwVer)
{
m_usRange = new ushort[m_iAiTotal];
}
// start the retrieving datas and save to db;
startRetrieving();
}
private void buttonStart_Click(object sender, EventArgs e)
{
if (m_bStart) // was started
{
panelDIO.Enabled = false;
m_bStart = false;
timer1.Enabled = false;
adamSocket.Disconnect();
buttonStart.Text = "Start";
}
else
{
adamSocket.SetTimeout(1000, 1000, 1000);
if (adamSocket.Connect(m_szIP, ProtocolType.Udp, m_Port))
{
// *******************************************
adamSocket.AdamSeriesType = AdamType.Adam4000; // you have to set this properity to make the command working properly
// *******************************************
m_iCount = 0; // reset the reading counter
// get module config
if (!adamSocket.Configuration(m_iAddr).GetModuleConfig(out m_adamConfig))
{
adamSocket.Disconnect();
MessageBox.Show("Failed to get module config!", "Error");
return;
}
//
panelDIO.Enabled = true;
timer1.Enabled = true; // enable timer
buttonStart.Text = "Stop";
m_bStart = true; // starting flag
}
else
{
MessageBox.Show("Failed to connect!", "Error");
}
}
}
/// <summary>
/// Init APAX controller information
/// </summary>
/// <returns></returns>
public bool RefreshConfiguration()
{
//Query device information and network informations
if (AdamSocket.GetAdamDeviceList("255.255.255.255", 2000, out m_adamList_Group))
{
for (int i = 0; i < m_adamList_Group.Count; i++)
{
m_adamObject = (AdamInformation)m_adamList_Group[i];
string tmpIP = string.Format("{0}.{1}.{2}.{3}", m_adamObject.IP[0], m_adamObject.IP[1], m_adamObject.IP[2], m_adamObject.IP[3]);
if (string.Compare(m_szIP, tmpIP) == 0)
{
break;
}
}
}
else
{
MessageBox.Show("Get module information failed!", "Error");
return(true);
}
//APAX Coupler Information
this.labModuleName.Text = "APAX-PAC";
this.txtFwVer.Text = string.Format("{0:X2}.{1:X2}", m_adamObject.FwVer[0], m_adamObject.FwVer[1]); //Firmware Version
if (m_sDSPFWVer != "")
{
this.txtFwVer2.Text = m_sDSPFWVer.Substring(0, 4).Insert(2, "."); //Kernel Firmware Version
}
if (adamType == AdamType.Apax5070)
{
if (m_adamModbusSocket.Connect(adamType, m_szIP, ProtocolType.Udp)) //FPGA Firmware Version (Should use udp to get FPGA version)
{
uint o_dwVer;
if (m_adamModbusSocket.Configuration().GetFpgaVersion(out o_dwVer))
{
this.txtFpgaFwVer.Text = o_dwVer.ToString("X4").Insert(2, ".");
}
}
if ((Array.IndexOf(m_szSlotInfo, APAX_5090_STR) == -1) || (m_adamObject.HardwareType[0] == 0x01 && m_adamObject.HardwareType[1] == 0x01))
{
if (tabControl1.TabPages.Contains(tabSerial))
{
tabControl1.TabPages.RemoveAt(tabControl1.TabPages.Count - 1);
}
}
else
{
if (!tabControl1.TabPages.Contains(tabSerial))
{
tabControl1.TabPages.Add(tabSerial);
}
m_listIndexOfApax5090 = new List <int>();
for (int idx = 0; idx < m_szSlotInfo.Length; idx++)
{
if ((m_szSlotInfo[idx] != null) && (m_szSlotInfo[idx].IndexOf(APAX_5090_STR) > -1))
{
m_listIndexOfApax5090.Add(idx);
}
}
m_iApax5090TcpPorVals = new int[AdamControl.APAX_MaxSlot][];
RefreshSerialModulesComPortSetting();
}
}
else
{
if (m_adamModbusSocket.Connect(m_szIP, ProtocolType.Udp, portNum)) //FPGA Firmware Version (Should use udp to get FPGA version)
{
uint o_dwVer;
if (m_adamModbusSocket.Configuration().GetFpgaVersion(out o_dwVer))
{
this.txtFpgaFwVer.Text = o_dwVer.ToString("X4").Insert(2, ".");
}
}
}
m_adamModbusSocket.Disconnect();
txtDeviceName.Text = m_adamObject.DeviceName;
txtDeviceDesc.Text = m_adamObject.Description;
RefreshCurrentModuleInfo(); //Current modules information
//Network information
txtMacAddress.Text = string.Format("{0:X02}-{1:X02}-{2:X02}-{3:X02}-{4:X02}-{5:X02}", //MAC address
m_adamObject.Mac[0], m_adamObject.Mac[1],
m_adamObject.Mac[2], m_adamObject.Mac[3],
m_adamObject.Mac[4], m_adamObject.Mac[5]);
txtIPAddress.Text = string.Format("{0}.{1}.{2}.{3}", //IP address
m_adamObject.IP[0], m_adamObject.IP[1], m_adamObject.IP[2], m_adamObject.IP[3]);
txtSubnetAddress.Text = string.Format("{0}.{1}.{2}.{3}", //subnet mask
m_adamObject.Subnet[0], m_adamObject.Subnet[1], m_adamObject.Subnet[2], m_adamObject.Subnet[3]);
txtDefaultGateway.Text = string.Format("{0}.{1}.{2}.{3}", //default gateway
m_adamObject.Gateway[0], m_adamObject.Gateway[1], m_adamObject.Gateway[2], m_adamObject.Gateway[3]);
numHostIdle.Text = m_adamObject.HostIdleTime.ToString();
// Refresh Modbus address mapping
RefreshModbusAddressSetting();
// Refresh FSV settings
RefreshFSVSettingInfo();
return(true);
}
private ushort[] m_usRange; //for newer version
public Form1()
{
InitializeComponent();
m_bStart = false; // the action stops at the beginning
m_szIP = "172.18.3.222"; // modbus slave IP address
m_iPort = 502; // modbus TCP port is 502
adamModbus = new AdamSocket();
adamModbus.SetTimeout(1000, 1000, 1000); // set timeout for TCP
adamUDP = new AdamSocket();
adamUDP.SetTimeout(1000, 1000, 1000); // set timeout for UDP
m_Adam6000Type = Adam6000Type.Adam6015; // the sample is for ADAM-6015
//m_Adam6000Type = Adam6000Type.Adam6017; // the sample is for ADAM-6017
//m_Adam6000Type = Adam6000Type.Adam6018; // the sample is for ADAM-6018
adamUDP.Connect(AdamType.Adam6000, m_szIP, ProtocolType.Udp);
if (adamUDP.Configuration().GetFirmwareVer(out m_szFwVersion))
{
m_DeviceFwVer = int.Parse(m_szFwVersion.Trim().Substring(0, 1));
}
adamUDP.Disconnect();
m_iAiTotal = AnalogInput.GetChannelTotal(m_Adam6000Type);
m_iDoTotal = DigitalOutput.GetChannelTotal(m_Adam6000Type);
txtModule.Text = m_Adam6000Type.ToString();
m_bChEnabled = new bool[m_iAiTotal];
if (m_DeviceFwVer < m_Adam6000NewerFwVer)
{
m_byRange = new byte[m_iAiTotal];
}
else
{
//for newer version Adam6017
m_usRange = new ushort[m_iAiTotal];
}
// arrange channel text box
if (m_Adam6000Type == Adam6000Type.Adam6015)
{
// Channel
chkboxCh7.Visible = false;
txtAIValue7.Visible = false;
// DO
panelDO.Visible = false;
}
else if (m_Adam6000Type == Adam6000Type.Adam6017)
{
// DO
btnCh2.Visible = false;
txtCh2.Visible = false;
btnCh3.Visible = false;
txtCh3.Visible = false;
btnCh4.Visible = false;
txtCh4.Visible = false;
btnCh5.Visible = false;
txtCh5.Visible = false;
btnCh6.Visible = false;
txtCh6.Visible = false;
btnCh7.Visible = false;
txtCh7.Visible = false;
}
else //Adam6018
{
;
}
}