public override byte[] GetEncoding()
{
try
{
MemoryStream outputStream = new MemoryStream();
BinaryWriter binaryWriter = new BinaryWriter(new BufferedStream(outputStream));
MessagesEncodingUtil.WriteMessageType(binaryWriter, this);
if (PeerAddress.PrivateEndPoint == null)
MessagesEncodingUtil.WriteString(binaryWriter, "null");
else
MessagesEncodingUtil.WriteString(binaryWriter, PeerAddress.PrivateEndPoint.ToString());
if (PeerAddress.PublicEndPoint == null)
MessagesEncodingUtil.WriteString(binaryWriter, "null");
else
MessagesEncodingUtil.WriteString(binaryWriter, PeerAddress.PublicEndPoint.ToString());
binaryWriter.Flush();
byte[] buffer = outputStream.ToArray();
if (buffer.Length <= EncodingConstants.MAX_MESSAGE_LENGTH)
return outputStream.ToArray();
else
throw new BinaryEncodingException();
}
catch (Exception)
{
throw new BinaryEncodingException("Decode");
}
}
public byte[] Encrypt(byte[] block)
{
ICryptoTransform enc = null;
Aes.Mode = CipherMode.CBC;
Aes.Key = key;
Aes.GenerateIV();
Console.WriteLine("Key: {0} IV: {1}", CNetwork.ByteArrayToString(Aes.Key), CNetwork.ByteArrayToString(Aes.IV));
CryptoStream cstream = null;
MemoryStream mem = null;
byte[] toEncrypt = null;
try
{
cstream = null;
mem = new MemoryStream();
toEncrypt = block;
enc = Aes.CreateEncryptor();
cstream = new CryptoStream(mem, enc, CryptoStreamMode.Write);
cstream.Write(toEncrypt, 0, toEncrypt.Length);
}
finally
{
if (cstream != null)
Aes.Clear();
cstream.Close();
}
Console.WriteLine(CNetwork.ByteArrayToString(mem.ToArray()));
return mem.ToArray();
}
public static byte[] nextToken(Stream input, byte[] delimiter)
{
int nextByte;
//If the stream has already ended, return null
if ((nextByte = input.ReadByte()) == -1)
return null;
MemoryStream tokenBuffer = new MemoryStream();
do
{
tokenBuffer.WriteByte((byte)nextByte);
byte[] currentToken = tokenBuffer.ToArray();
if (endsWith(currentToken, delimiter))
{
int tokenLength = currentToken.Length - delimiter.Length;
byte[] token = new byte[tokenLength];
Array.Copy(currentToken, 0, token, 0, tokenLength);
return token;
}
}
while ((nextByte = input.ReadByte()) != -1);
return tokenBuffer.ToArray();
}
public override async Task WriteQueryToStream(Stream stream, ILogger logger, Spec.Query query, CancellationToken cancellationToken)
{
using (var memoryBuffer = new MemoryStream(1024))
using (var streamWriter = new StreamWriter(memoryBuffer, utf8Encoding))
{
WriteQuery(new JsonWriter(streamWriter), query);
streamWriter.Flush();
var data = memoryBuffer.ToArray();
memoryBuffer.Seek(0, SeekOrigin.Begin);
if (logger.InformationEnabled())
{
string dataStr = Encoding.UTF8.GetString(data);
logger.Information("JSON query: {0}", dataStr);
}
var tokenHeader = BitConverter.GetBytes(query.token);
if (!BitConverter.IsLittleEndian)
Array.Reverse(tokenHeader, 0, tokenHeader.Length);
memoryBuffer.Write(tokenHeader, 0, tokenHeader.Length);
var lengthHeader = BitConverter.GetBytes(data.Length);
if (!BitConverter.IsLittleEndian)
Array.Reverse(lengthHeader, 0, lengthHeader.Length);
memoryBuffer.Write(lengthHeader, 0, lengthHeader.Length);
memoryBuffer.Write(data, 0, data.Length);
logger.Debug("Writing packet, {0} bytes", data.Length);
data = memoryBuffer.ToArray();
await stream.WriteAsync(data, 0, data.Length, cancellationToken);
}
}
public void Download(byte[] data, int bufferSize, DownloadSegmentPositions[] segmentPositionInfos)
{
BeforeDownload();
DownloadStream inputStream = new DownloadStream(data);
IList<ISegmentDownloadTask> segmentDownloadTasks = new List<ISegmentDownloadTask>(segmentPositionInfos.Length);
IList<DownloadStream> downloadStreams = new List<DownloadStream>(segmentPositionInfos.Length);
MemoryStream outputStream = new MemoryStream();
for (int i = 0; i < segmentPositionInfos.Length; i++)
{
DownloadSegmentPositions segmentPosition = segmentPositionInfos[i];
byte[] dataPart = data.Skip((int) segmentPosition.StartPosition).Take((int)(segmentPosition.EndPosition - segmentPosition.StartPosition + 1)).ToArray();
DownloadStream downloadStream = new DownloadStream(dataPart);
segmentDownloadTasks.Add(CreateSegmentDownloadTask(bufferSize, CreateSegmentDownloader(downloadStream, segmentPosition), CreateSegmentWriter(outputStream)));
downloadStreams.Add(downloadStream);
}
SegmentDownloadManager segmentDownloadManager = new SegmentDownloadManager(new SegmentDownloadTaskCollection(segmentDownloadTasks));
segmentDownloadManager.Start();
segmentDownloadManager.Finish(true);
AfterDownload();
long totalDownloads = downloadStreams.Sum(x => x.TotalDownloads);
Assert.AreEqual(data.Length, totalDownloads);
Assert.AreEqual(inputStream.ToArray().Take(data.Length).ToArray(), outputStream.ToArray().Take(data.Length).ToArray());
Assert.AreEqual(inputStream.ToArray(), outputStream.ToArray());
}
public static String hashAndEncode(byte[] password, int hashalg, byte[] salt, int icount, byte[] challenge)
{
byte[] hash;
if (hashalg == 0)
{
hash = sha1(password);
}
else
{
hash = HashPasswordV2(hashalg, salt, icount, password);
}
if (challenge.Length > 0)
{
var ms = new MemoryStream();
ms.Write(challenge, 0, challenge.Length);
ms.Write(hash, 0, hash.Length);
if (hashalg == 0)
hash = sha1(ms.ToArray());
else
{
hash = HashPasswordV2(hashalg, salt, icount, ms.ToArray());
}
}
return hexEncode(hash);
}
public void ExtractSnippet(string fileName, string pattern, string expectedFile)
{
// Run the extraction
ISnippetExtractor snippetExtractor;
if (!this.extractorCache.TryGetValue(fileName, out snippetExtractor))
{
snippetExtractor = new XmlSnippetExtractor(this.SourceDirectories);
this.extractorCache[fileName] = snippetExtractor;
}
Projbook.Core.Model.Snippet snippet = snippetExtractor.Extract(fileName, pattern);
// Load the expected file content
MemoryStream memoryStream = new MemoryStream();
using (var fileReader = new StreamReader(new FileStream(Path.GetFullPath(Path.Combine("Resources", "Expected", expectedFile)), FileMode.Open)))
using (var fileWriter = new StreamWriter(memoryStream))
{
fileWriter.Write(fileReader.ReadToEnd());
}
Console.WriteLine(System.Text.Encoding.UTF8.GetString(memoryStream.ToArray()).Replace("\r\n", Environment.NewLine));
Console.WriteLine(snippet.Content.Replace("\r\n", Environment.NewLine));
// Assert
Assert.AreEqual(
System.Text.Encoding.UTF8.GetString(memoryStream.ToArray()).Replace("\r\n", Environment.NewLine),
snippet.Content.Replace("\r\n", Environment.NewLine));
}
public static IObservable<byte[]> MinimumBuffer(this IObservable<byte[]> input, int minimumBufSize)
{
return Observable.Create<byte[]>(observer =>
{
MemoryStream memStream = new MemoryStream();
return input.Subscribe(
bytes =>
{
memStream.Write(bytes, 0, bytes.Length);
if (memStream.Length >= minimumBufSize)
{
Debug.Assert(memStream.Position == memStream.Length);
observer.OnNext(memStream.ToArray());
memStream.SetLength(0);// truncate the stream
memStream.Position = 0;
}
},
observer.OnError,
() =>
{
if (memStream.Length > 0)
observer.OnNext(memStream.ToArray());
observer.OnCompleted();
}
);
});
}
public static async Task<Stream> CompressAsync(CompressionType type, Stream original)
{
using (var ms = new MemoryStream())
{
Stream compressedStream = null;
if (type == CompressionType.deflate)
{
compressedStream = new DeflateStream(ms, CompressionMode.Compress);
}
else if (type == CompressionType.gzip)
{
compressedStream = new GZipStream(ms, CompressionMode.Compress);
}
if (type != CompressionType.none)
{
using (compressedStream)
{
await original.CopyToAsync(compressedStream);
}
//NOTE: If we just try to return the ms instance, it will simply not work
// a new stream needs to be returned that contains the compressed bytes.
// I've tried every combo and this appears to be the only thing that works.
byte[] output = ms.ToArray();
return new MemoryStream(ms.ToArray());
}
//not compressed
return original;
}
}
/// <summary>
/// Convert the Webstreamlogo (Online or Default) to byte[]
/// </summary>
public static byte[] ImageFromLogo(string path)
{
var ms = new MemoryStream();
try
{
var imageRequest = (HttpWebRequest)WebRequest.Create(path);
imageRequest.Credentials = CredentialCache.DefaultCredentials;
using (var imageReponse = (HttpWebResponse)imageRequest.GetResponse())
{
using (var imageStream = imageReponse.GetResponseStream())
{
if (imageStream != null) Image.FromStream(imageStream).Save(ms, ImageFormat.Png);
}
}
}
catch (Exception)
{
var s = ServiceRegistration.Get<IPathManager>().GetPath(@"<PLUGINS>\Webradio\Skin\default\images\DefaultLogo.png");
Image.FromFile(s).Save(ms, ImageFormat.Png);
return ms.ToArray();
throw;
}
return ms.ToArray();
}
public void ServerPackageRepositoryReadsDerivedData()
{
// Arrange
var mockProjectSystem = new Mock<MockProjectSystem>() { CallBase = true };
var package = new PackageBuilder() { Id = "Test", Version = new System.Version("1.0"), Description = "Description" };
var mockFile = new Mock<IPackageFile>();
mockFile.Setup(m => m.Path).Returns("foo");
mockFile.Setup(m => m.GetStream()).Returns(new MemoryStream());
package.Files.Add(mockFile.Object);
package.Authors.Add("Test Author");
var memoryStream = new MemoryStream();
package.Save(memoryStream);
memoryStream.Seek(0, SeekOrigin.Begin);
mockProjectSystem.Object.AddFile("foo.nupkg");
mockProjectSystem.Setup(c => c.OpenFile(It.IsAny<string>())).Returns(() => new MemoryStream(memoryStream.ToArray()));
var serverRepository = new ServerPackageRepository(new DefaultPackagePathResolver(mockProjectSystem.Object), mockProjectSystem.Object);
serverRepository.HashProvider = GetHashProvider();
// Act
var packages = serverRepository.GetPackagesWithDerivedData();
// Assert
byte[] data = memoryStream.ToArray();
Assert.AreEqual(data.Length, packages.Single().PackageSize);
CollectionAssert.AreEquivalent(data.Select(Invert).ToArray(), Convert.FromBase64String(packages.Single().PackageHash));
Assert.AreEqual(data.Length, packages.Single().PackageSize);
}
public void Run()
{
var registerer = new MessageRegisterer();
registerer.AddMessageTypes(typeof(IPerformSingleTaskOnComputersMessage), typeof(IInstallAssemblyMessage));
var implementations = new MessageInterfaceImplementations(new DefaultMessageInterfaceImplementationFactory(), registerer);
var factory = new MessageFactory(implementations, new MessageDefinitionFactory());
var assembly = factory.Create<IInstallAssemblyMessage>(m =>
{
m.ArtifactId = Guid.Empty;
m.AssemblyFilename = "Jacob.exe";
});
var message = factory.Create<IPerformSingleTaskOnComputersMessage>(m =>
{
m.OperationId = Guid.NewGuid();
m.Title = "Nothing";
m.Message = assembly;
m.ComputerNames = new string[0];
m.Birthday = DateTime.UtcNow;
});
var formatter = new XmlTransportMessageBodyFormatter(registerer, new MtaMessageMapper(implementations, factory, registerer));
formatter.Initialize();
using (var stream = new MemoryStream())
{
formatter.Serialize(new IMessage[] { message }, stream);
Console.WriteLine(Encoding.ASCII.GetString(stream.ToArray()));
using (var reading = new MemoryStream(stream.ToArray()))
{
var read = formatter.Deserialize(reading);
}
}
}
private static void TestByte( Byte value )
{
var output = new MemoryStream();
Packer.Create( output ).Pack( value );
Assert.AreEqual( value, Unpacking.UnpackByte( new MemoryStream( output.ToArray() ) ) );
Assert.AreEqual( value, Unpacking.UnpackByte( output.ToArray() ).Value );
}
/// <summary>
/// Send information about this CityServer to the LoginServer...
/// </summary>
/// <param name="Client">The client connected to the LoginServer.</param>
public static void SendServerInfo(NetworkClient Client)
{
PacketStream Packet = new PacketStream(0x64, 0);
Packet.WriteByte(0x64);
MemoryStream PacketBody = new MemoryStream();
BinaryWriter PacketWriter = new BinaryWriter(PacketBody);
PacketWriter.Write((string)GlobalSettings.Default.CityName);
PacketWriter.Write((string)GlobalSettings.Default.CityDescription);
PacketWriter.Write((string)Settings.BINDING.Address.ToString());
PacketWriter.Write((int)Settings.BINDING.Port);
PacketWriter.Write((byte)1); //CityInfoStatus.OK
PacketWriter.Write((ulong)GlobalSettings.Default.CityThumbnail);
PacketWriter.Write((string)GlobalSettings.Default.ServerID);
PacketWriter.Write((ulong)GlobalSettings.Default.Map);
PacketWriter.Flush();
Packet.WriteUInt16((ushort)(PacketBody.ToArray().Length + PacketHeaders.UNENCRYPTED));
Packet.Write(PacketBody.ToArray(), 0, (int)PacketWriter.BaseStream.Length);
Packet.Flush();
PacketWriter.Close();
Client.Send(Packet.ToArray());
}
public void NewToOld()
{
var oldSub = new Subscription("the message", new Uri("http://bob/phil"));
IList<Subscription> oldSubs = new List<Subscription>();
oldSubs.Add(oldSub);
using (var newStream = new MemoryStream())
{
NewWriter.Serialize(newStream, oldSubs);
newStream.Position = 0;
using (var oldStream = new MemoryStream())
{
using (var str = File.OpenRead(_pathToFile))
{
var buff = new byte[str.Length];
str.Read(buff, 0, buff.Length);
oldStream.Write(buff, 0, buff.Length);
}
if (File.Exists(".\\my_msg_2.txt")) File.Delete(".\\my_msg_2.txt");
using (var fs = File.OpenWrite(".\\my_msg_2.txt"))
{
fs.Write(newStream.ToArray(), 0, newStream.ToArray().Length);
}
StreamAssert.AreEqual(oldStream, newStream);
}
}
}
public override byte[] GetEncoding()
{
try
{
MemoryStream outputStream = new MemoryStream();
BinaryWriter binaryWriter = new BinaryWriter(new BufferedStream(outputStream));
MessagesEncodingUtil.WriteMessageType(binaryWriter, this);
MessagesEncodingUtil.WriteInt(binaryWriter, ByteArray.Length);
MessagesEncodingUtil.WriteByteArray(binaryWriter, ByteArray);
binaryWriter.Flush();
byte[] buffer = outputStream.ToArray();
if (buffer.Length <= EncodingConstants.MAX_MESSAGE_LENGTH)
return outputStream.ToArray();
else
throw new BinaryEncodingException();
}
catch (Exception)
{
throw new BinaryEncodingException("Decode");
}
}
public void We_should_go_through_the_list_quickly()
{
DerivedObject obj = new DerivedObject("Chris", "Patterson", "Pimp");
DerivedObject obj2 = new DerivedObject("Joe", "Blow", "Daddy");
//IObjectFormatter fomatter = new XmlObjectFormatter();
MemoryStream mstream = new MemoryStream();
using(IObjectFormatter formatter = new BEncodeObjectFormatter(mstream))
using(IObjectSerializer serializer = new BasicObjectSerializer(formatter))
{
serializer.Serialize(formatter, obj);
serializer.Serialize(formatter, obj2);
}
Debug.WriteLine("DATA: " + Encoding.UTF8.GetString(mstream.ToArray()));
MemoryStream mdecode = new MemoryStream(mstream.ToArray());
using(BDecode decoder = new BDecode(mdecode))
{
object newObj = decoder.Read(TimeSpan.FromSeconds(200));
Assert.That(newObj, Is.Not.Null);
Assert.That(newObj, Is.TypeOf(typeof(DerivedObject)), "Invalid Type Received");
object newObj2 = decoder.Read(TimeSpan.FromSeconds(200));
Assert.That(newObj2, Is.Not.Null);
Assert.That(newObj2, Is.TypeOf(typeof(DerivedObject)), "Invalid Type Received");
}
}
public void NewToOld()
{
var oldMsg = new OldCacheUpdateRequest(new Uri("http://bob/phil"));
var oldold = Factory.ConvertToOldCacheUpdateRequest(oldMsg);
using (var newStream = new MemoryStream())
{
PlainFormatter.Serialize(newStream, oldold);
newStream.Position = 0;
using (var oldStream = new MemoryStream())
{
using (var str = File.OpenRead(_pathToFile))
{
var buff = new byte[str.Length];
str.Read(buff, 0, buff.Length);
oldStream.Write(buff, 0, buff.Length);
}
var newFileName = ".\\new-{0}.txt".FormatWith(oldMsg.GetType().Name);
if (File.Exists(newFileName)) File.Delete(newFileName);
using (var fs = File.OpenWrite(newFileName))
{
fs.Write(newStream.ToArray(), 0, newStream.ToArray().Length);
}
StreamAssert.AreEqual(oldStream, newStream);
}
}
}
public static SteamPacket CreatePacket(byte[] rawData)
{
SteamPacket packet;
SteamPacketTypes packetType = (SteamPacketTypes)rawData[0];
MemoryStream byteStream = new MemoryStream(rawData.Length - 1);
byteStream.Write(rawData, 1, rawData.Length - 1);
switch(packetType)
{
case SteamPacketTypes.S2C_CHALLENGE:
packet = new ChallengeResponsePacket(byteStream.ToArray());
break;
case SteamPacketTypes.S2A_INFO2:
packet = new SourceServerInfoResponsePacket(byteStream.ToArray());
break;
case SteamPacketTypes.S2A_RULES:
packet = new ServerRulesResponsePacket(byteStream.ToArray());
break;
case SteamPacketTypes.S2A_PLAYER:
packet = new PlayersResponsePacket(byteStream.ToArray());
break;
default:
packet = new SteamPacket(packetType, byteStream.ToArray());
break;
}
return packet;
}
public string DecryptString(string Value)
{
ICryptoTransform ct;
MemoryStream ms;
CryptoStream cs;
Byte[] byt = new byte[64];
try
{
ct = mCSP.CreateDecryptor(mCSP.Key, mCSP.IV);
byt = Convert.FromBase64String(Value);
ms = new MemoryStream();
cs = new CryptoStream(ms, ct, CryptoStreamMode.Write);
cs.Write(byt, 0, byt.Length);
cs.FlushFinalBlock();
cs.Close();
string test = Encoding.UTF8.GetString(ms.ToArray());
return Encoding.UTF8.GetString(ms.ToArray());
}
catch (Exception ex)
{
throw (new Exception("An error occurred while decrypting string", ex));
}
}
// ---------------------------------------------------------------------------
public void Write(Stream stream) {
using (ZipFile zip = new ZipFile()) {
// Use previous examples to create PDF files
MovieLinks1 m = new MovieLinks1();
byte[] pdfM = Utility.PdfBytes(m);
LinkActions l = new LinkActions();
byte[] pdfL = l.CreatePdf();
// Create readers.
PdfReader[] readers = {
new PdfReader(pdfL),
new PdfReader(pdfM)
};
// step 1
//Document document = new Document();
// step 2
using (var ms = new MemoryStream()) {
// step 1
using (Document document = new Document()) {
using (PdfCopy copy = new PdfCopy(document, ms)) {
// step 3
document.Open();
// step 4
int n;
// copy the pages of the different PDFs into one document
for (int i = 0; i < readers.Length; i++) {
readers[i].ConsolidateNamedDestinations();
n = readers[i].NumberOfPages;
for (int page = 0; page < n; ) {
copy.AddPage(copy.GetImportedPage(readers[i], ++page));
}
}
// Add named destination
copy.AddNamedDestinations(
// from the second document
SimpleNamedDestination.GetNamedDestination(readers[1], false),
// using the page count of the first document as offset
readers[0].NumberOfPages
);
}
zip.AddEntry(RESULT1, ms.ToArray());
}
// Create a reader
PdfReader reader = new PdfReader(ms.ToArray());
// Convert the remote destinations into local destinations
reader.MakeRemoteNamedDestinationsLocal();
using (MemoryStream ms2 = new MemoryStream()) {
// Create a new PDF containing the local destinations
using (PdfStamper stamper = new PdfStamper(reader, ms2)) {
}
zip.AddEntry(RESULT2, ms2.ToArray());
}
}
zip.AddEntry(Utility.ResultFileName(m.ToString() + ".pdf"), pdfM);
zip.AddEntry(Utility.ResultFileName(l.ToString() + ".pdf"), pdfL);
zip.Save(stream);
}
}
public ITestResult Perform()
{
byte[] testIv = { 1, 2, 3, 4, 5, 6, 7, 8 };
Asn1Encodable[] values =
{
new Cast5CbcParameters(testIv, 128),
new NetscapeCertType(NetscapeCertType.Smime),
new VerisignCzagExtension(new DerIA5String("hello")),
#if INCLUDE_IDEA
new IdeaCbcPar(testIv),
#endif
new NetscapeRevocationUrl(new DerIA5String("http://test"))
};
#if INCLUDE_IDEA
byte[] data = Base64.Decode("MA4ECAECAwQFBgcIAgIAgAMCBSAWBWhlbGxvMAoECAECAwQFBgcIFgtodHRwOi8vdGVzdA==");
#else
byte[] data = Base64.Decode("MA4ECAECAwQFBgcIAgIAgAMCBSAWBWhlbGxvFgtodHRwOi8vdGVzdA==");
#endif
try
{
MemoryStream bOut = new MemoryStream();
Asn1OutputStream aOut = new Asn1OutputStream(bOut);
for (int i = 0; i != values.Length; i++)
{
aOut.WriteObject(values[i]);
}
if (!Arrays.AreEqual(bOut.ToArray(), data))
{
return new SimpleTestResult(false, Name + ": Failed data check");
}
Asn1InputStream aIn = new Asn1InputStream(bOut.ToArray());
for (int i = 0; i != values.Length; i++)
{
Asn1Object o = aIn.ReadObject();
if (!values[i].Equals(o))
{
return new SimpleTestResult(false, Name + ": Failed equality test for " + o);
}
if (o.GetHashCode() != values[i].GetHashCode())
{
return new SimpleTestResult(false, Name + ": Failed hashCode test for " + o);
}
}
return new SimpleTestResult(true, Name + ": Okay");
}
catch (Exception e)
{
return new SimpleTestResult(false, Name + ": Failed - exception " + e.ToString(), e);
}
}
public string Receive()
{
int ib = 0x00;
MemoryStream ms = new MemoryStream();
for (; _stream.ReadByte() != 0x0B; ) ;
while (true) {
if (ib == 0x1C) {
ib = _stream.ReadByte();
if (ib == 0x0D)
break;
ms.WriteByte(0x1C);
ms.WriteByte((byte)ib);
}
else {
ib = _stream.ReadByte();
if (ib != 0x1C)
ms.WriteByte((byte)ib);
}
}
if (_version3) {
_stream.Write(ACK, 0, ACK.Length);
_stream.Flush();
}
#if SILVERLIGHT
return Encoding.UTF8.GetString(ms.ToArray(), 0, (int)ms.Length);
#else
return Encoding.ASCII.GetString(ms.ToArray());
#endif
}
public static String Cryption(string text, string password, bool boolCrypt)
{
byte[] utf8_Salt = new byte[] { 0x26, 0x19, 0x81, 0x4E, 0xA0, 0x6D, 0x95, 0x34, 0x26, 0x75, 0x64, 0x05, 0xF6 };
PasswordDeriveBytes i_Pass = new PasswordDeriveBytes(password, utf8_Salt);
Rijndael i_Alg = Rijndael.Create();
i_Alg.Key = i_Pass.GetBytes(32);
i_Alg.IV = i_Pass.GetBytes(16);
ICryptoTransform i_Trans = (boolCrypt) ? i_Alg.CreateEncryptor() : i_Alg.CreateDecryptor();
MemoryStream i_Mem = new MemoryStream();
CryptoStream i_Crypt = new CryptoStream(i_Mem, i_Trans, CryptoStreamMode.Write);
byte[] utf8_Data;
if (boolCrypt) utf8_Data = Encoding.Unicode.GetBytes(text);
else utf8_Data = Convert.FromBase64String(text);
try
{
i_Crypt.Write(utf8_Data, 0, utf8_Data.Length);
i_Crypt.Close();
}
catch { return null; }
if (boolCrypt) return Convert.ToBase64String(i_Mem.ToArray());
else return Encoding.Unicode.GetString(i_Mem.ToArray());
}
public async Task<string> Request(string data)
{
var oWebRequest =
(HttpWebRequest) WebRequest.Create("http://" + _ipEndPoint.Address + ":" + _ipEndPoint.Port);
oWebRequest.Method = "POST";
oWebRequest.ContentType = "text/plain";
var stream = oWebRequest.GetRequestStream();
var dataToSend = Encoding.UTF8.GetBytes(data);
stream.Write(dataToSend, 0, dataToSend.Length);
var oWebResponse = await oWebRequest.GetResponseAsync();
var receiveStream = oWebResponse.GetResponseStream();
try
{
if (receiveStream == null)
throw new Exception("ReceiveStream == null");
var ms = new MemoryStream();
receiveStream.CopyTo(ms);
var array = ms.ToArray();
if (array.Length > 0)
return Encoding.UTF8.GetString(ms.ToArray());
}
catch (Exception)
{
return string.Empty;
}
return string.Empty;
}
public static void VerifyAndSave(this Image image, string filename, Action<Stream> save = null)
{
var directory = Path.GetDirectoryName(filename);
if (!Directory.Exists(directory)) Directory.CreateDirectory(directory);
var ms = new MemoryStream();
if (save != null)
save(ms);
else
image.SaveAsPng(ms);
if (File.Exists(filename))
{
try
{
Assert.Equal(ms.ToArray(), File.ReadAllBytes(filename));
}
catch
{
var actualName = Path.Combine(
Path.GetDirectoryName(filename),
$"{ Path.GetFileNameWithoutExtension(filename) }.actual{ Path.GetExtension(filename) }");
File.WriteAllBytes(actualName, ms.ToArray());
throw;
}
}
else
{
File.WriteAllBytes(filename, ms.ToArray());
}
}
public string Decrypt(string encryptStr)
{
byte[] bKey = Encoding.UTF8.GetBytes(PrivateKey);
byte[] bIV = Encoding.UTF8.GetBytes(IV);
byte[] byteArray = Convert.FromBase64String(encryptStr);
string decrypt = null;
#if !NET451
var aes = System.Security.Cryptography.Aes.Create();
#else
var aes = Rijndael.Create();
#endif
try
{
using (MemoryStream mStream = new MemoryStream())
{
using (CryptoStream cStream = new CryptoStream(mStream, aes.CreateDecryptor(bKey, bIV), CryptoStreamMode.Write))
{
cStream.Write(byteArray, 0, byteArray.Length);
cStream.FlushFinalBlock();
decrypt = Encoding.UTF8.GetString(mStream.ToArray(), 0, mStream.ToArray().Count());
}
}
}
catch { }
#if NET451
aes.Clear();
#endif
return decrypt;
}
/// <summary>
/// Serializes this <see cref="Token"/> instance as a string that can be
/// included as part of a return_to variable in a querystring.
/// This string is cryptographically signed to protect against tampering.
/// </summary>
public string Serialize(INonceStore store) {
using (MemoryStream dataStream = new MemoryStream()) {
if (!persistSignature(store)) {
Debug.Assert(!persistNonce(Endpoint, store), "Without a signature, a nonce is meaningless.");
dataStream.WriteByte(0); // there will be NO signature.
StreamWriter writer = new StreamWriter(dataStream);
Endpoint.Serialize(writer);
writer.Flush();
return Convert.ToBase64String(dataStream.ToArray());
} else {
using (HashAlgorithm shaHash = createHashAlgorithm(store))
using (CryptoStream shaStream = new CryptoStream(dataStream, shaHash, CryptoStreamMode.Write)) {
StreamWriter writer = new StreamWriter(shaStream);
Endpoint.Serialize(writer);
if (persistNonce(Endpoint, store))
writer.WriteLine(Nonce.Code);
writer.Flush();
shaStream.Flush();
shaStream.FlushFinalBlock();
byte[] hash = shaHash.Hash;
byte[] data = new byte[1 + hash.Length + dataStream.Length];
data[0] = 1; // there is a signature
Buffer.BlockCopy(hash, 0, data, 1, hash.Length);
Buffer.BlockCopy(dataStream.ToArray(), 0, data, 1 + hash.Length, (int)dataStream.Length);
return Convert.ToBase64String(data);
}
}
}
}
public object Search(queryrequest xml)
{
SemWeb.Query.Query query = null;
string q = string.Empty;
try
{
query = new SparqlEngine(new StringReader(xml.query));
}
catch (QueryFormatException ex)
{
var malformed = new malformedquery();
malformed.faultdetails = ex.Message;
return malformed;
}
// Load the data from sql server
SemWeb.Stores.SQLStore store;
string connstr = ConfigurationManager.ConnectionStrings["SemWebDB"].ConnectionString;
DebugLogging.Log(connstr);
store = (SemWeb.Stores.SQLStore)SemWeb.Store.CreateForInput(connstr);
//Create a Sink for the results to be writen once the query is run.
MemoryStream ms = new MemoryStream();
XmlTextWriter writer = new XmlTextWriter(ms, System.Text.Encoding.UTF8);
QueryResultSink sink = new SparqlXmlQuerySink(writer);
try
{
// Run the query.
query.Run(store, sink);
}
catch (Exception ex)
{
// Run the query.
query.Run(store, sink);
DebugLogging.Log("Run the query a second time");
DebugLogging.Log(ex.Message);
}
//flush the writer then load the memory stream
writer.Flush();
ms.Seek(0, SeekOrigin.Begin);
//Write the memory stream out to the response.
ASCIIEncoding ascii = new ASCIIEncoding();
DebugLogging.Log(ascii.GetString(ms.ToArray()).Replace("???", ""));
writer.Close();
DebugLogging.Log("End of Processing");
return SerializeXML.DeserializeObject(ascii.GetString(ms.ToArray()).Replace("???", ""), typeof(sparql)) as sparql;
}
public void TestNil()
{
var output = new MemoryStream();
Packer.Create( output ).PackNull();
Assert.AreEqual( null, Unpacking.UnpackNull( new MemoryStream( output.ToArray() ) ) );
Assert.AreEqual( null, Unpacking.UnpackNull( output.ToArray() ).Value );
}
/// <summary>
/// Create model.
///
/// Uploads training files to customize a translation model. You can customize a model with a forced glossary or
/// with a parallel corpus:
/// * Use a *forced glossary* to force certain terms and phrases to be translated in a specific way. You can
/// upload only a single forced glossary file for a model. The size of a forced glossary file for a custom model
/// is limited to 10 MB.
/// * Use a *parallel corpus* when you want your custom model to learn from general translation patterns in
/// parallel sentences in your samples. What your model learns from a parallel corpus can improve translation
/// results for input text that the model has not been trained on. You can upload multiple parallel corpora
/// files with a request. To successfully train with parallel corpora, the corpora files must contain a
/// cumulative total of at least 5000 parallel sentences. The cumulative size of all uploaded corpus files for a
/// custom model is limited to 250 MB.
///
/// Depending on the type of customization and the size of the uploaded files, training time can range from
/// minutes for a glossary to several hours for a large parallel corpus. To create a model that is customized
/// with a parallel corpus and a forced glossary, customize the model with a parallel corpus first and then
/// customize the resulting model with a forced glossary.
///
/// You can create a maximum of 10 custom models per language pair. For more information about customizing a
/// translation model, including the formatting and character restrictions for data files, see [Customizing your
/// model](https://cloud.ibm.com/docs/language-translator?topic=language-translator-customizing).
///
/// #### Supported file formats
///
/// You can provide your training data for customization in the following document formats:
/// * **TMX** (`.tmx`) - Translation Memory eXchange (TMX) is an XML specification for the exchange of
/// translation memories.
/// * **XLIFF** (`.xliff`) - XML Localization Interchange File Format (XLIFF) is an XML specification for the
/// exchange of translation memories.
/// * **CSV** (`.csv`) - Comma-separated values (CSV) file with two columns for aligned sentences and phrases.
/// The first row contains the language code.
/// * **TSV** (`.tsv` or `.tab`) - Tab-separated values (TSV) file with two columns for aligned sentences and
/// phrases. The first row contains the language code.
/// * **JSON** (`.json`) - Custom JSON format for specifying aligned sentences and phrases.
/// * **Microsoft Excel** (`.xls` or `.xlsx`) - Excel file with the first two columns for aligned sentences and
/// phrases. The first row contains the language code.
///
/// You must encode all text data in UTF-8 format. For more information, see [Supported document formats for
/// training
/// data](https://cloud.ibm.com/docs/language-translator?topic=language-translator-customizing#supported-document-formats-for-training-data).
///
///
/// #### Specifying file formats
///
/// You can indicate the format of a file by including the file extension with the file name. Use the file
/// extensions shown in **Supported file formats**.
///
/// Alternatively, you can omit the file extension and specify one of the following `content-type`
/// specifications for the file:
/// * **TMX** - `application/x-tmx+xml`
/// * **XLIFF** - `application/xliff+xml`
/// * **CSV** - `text/csv`
/// * **TSV** - `text/tab-separated-values`
/// * **JSON** - `application/json`
/// * **Microsoft Excel** - `application/vnd.openxmlformats-officedocument.spreadsheetml.sheet`
///
/// For example, with `curl`, use the following `content-type` specification to indicate the format of a CSV
/// file named **glossary**:
///
/// `--form "forced_glossary=@glossary;type=text/csv"`.
/// </summary>
/// <param name="baseModelId">The ID of the translation model to use as the base for customization. To see
/// available models and IDs, use the `List models` method. Most models that are provided with the service are
/// customizable. In addition, all models that you create with parallel corpora customization can be further
/// customized with a forced glossary.</param>
/// <param name="forcedGlossary">A file with forced glossary terms for the source and target languages. The
/// customizations in the file completely overwrite the domain translation data, including high frequency or
/// high confidence phrase translations.
///
/// You can upload only one glossary file for a custom model, and the glossary can have a maximum size of 10 MB.
/// A forced glossary must contain single words or short phrases. For more information, see **Supported file
/// formats** in the method description.
///
/// *With `curl`, use `--form forced_glossary=@{filename}`.*. (optional)</param>
/// <param name="parallelCorpus">A file with parallel sentences for the source and target languages. You can
/// upload multiple parallel corpus files in one request by repeating the parameter. All uploaded parallel
/// corpus files combined must contain at least 5000 parallel sentences to train successfully. You can provide a
/// maximum of 500,000 parallel sentences across all corpora.
///
/// A single entry in a corpus file can contain a maximum of 80 words. All corpora files for a custom model can
/// have a cumulative maximum size of 250 MB. For more information, see **Supported file formats** in the method
/// description.
///
/// *With `curl`, use `--form parallel_corpus=@{filename}`.*. (optional)</param>
/// <param name="name">An optional model name that you can use to identify the model. Valid characters are
/// letters, numbers, dashes, underscores, spaces, and apostrophes. The maximum length of the name is 32
/// characters. (optional)</param>
/// <returns><see cref="TranslationModel" />TranslationModel</returns>
public DetailedResponse <TranslationModel> CreateModel(string baseModelId, System.IO.MemoryStream forcedGlossary = null, System.IO.MemoryStream parallelCorpus = null, string name = null)
{
if (string.IsNullOrEmpty(baseModelId))
{
throw new ArgumentNullException("`baseModelId` is required for `CreateModel`");
}
if (string.IsNullOrEmpty(VersionDate))
{
throw new ArgumentNullException("versionDate cannot be null.");
}
DetailedResponse <TranslationModel> result = null;
try
{
var formData = new MultipartFormDataContent();
if (forcedGlossary != null)
{
var forcedGlossaryContent = new ByteArrayContent(forcedGlossary.ToArray());
System.Net.Http.Headers.MediaTypeHeaderValue contentType;
System.Net.Http.Headers.MediaTypeHeaderValue.TryParse("application/octet-stream", out contentType);
forcedGlossaryContent.Headers.ContentType = contentType;
formData.Add(forcedGlossaryContent, "forced_glossary", "filename");
}
if (parallelCorpus != null)
{
var parallelCorpusContent = new ByteArrayContent(parallelCorpus.ToArray());
System.Net.Http.Headers.MediaTypeHeaderValue contentType;
System.Net.Http.Headers.MediaTypeHeaderValue.TryParse("application/octet-stream", out contentType);
parallelCorpusContent.Headers.ContentType = contentType;
formData.Add(parallelCorpusContent, "parallel_corpus", "filename");
}
IClient client = this.Client;
SetAuthentication();
var restRequest = client.PostAsync($"{this.Endpoint}/v3/models");
restRequest.WithArgument("version", VersionDate);
restRequest.WithHeader("Accept", "application/json");
if (!string.IsNullOrEmpty(baseModelId))
{
restRequest.WithArgument("base_model_id", baseModelId);
}
if (!string.IsNullOrEmpty(name))
{
restRequest.WithArgument("name", name);
}
restRequest.WithBodyContent(formData);
restRequest.WithHeaders(Common.GetSdkHeaders("language_translator", "v3", "CreateModel"));
restRequest.WithHeaders(customRequestHeaders);
ClearCustomRequestHeaders();
result = restRequest.As <TranslationModel>().Result;
if (result == null)
{
result = new DetailedResponse <TranslationModel>();
}
}
catch (AggregateException ae)
{
throw ae.Flatten();
}
return(result);
}
protected void Page_Load(object sender, System.EventArgs e)
{
try
{
base.Response.Cache.SetCacheability(System.Web.HttpCacheability.NoCache);
string text = Globals.CreateVerifyCode(4);
int num = 45;
int num2 = text.Length * 20;
System.Drawing.Bitmap bitmap = new System.Drawing.Bitmap(num2 - 3, 40);
System.Drawing.Graphics graphics = System.Drawing.Graphics.FromImage(bitmap);
graphics.Clear(System.Drawing.Color.AliceBlue);
graphics.DrawRectangle(new System.Drawing.Pen(System.Drawing.Color.Gray, 0f), 0, 0, bitmap.Width - 1, bitmap.Height - 3);
System.Random random = new System.Random();
System.Drawing.Pen pen = new System.Drawing.Pen(System.Drawing.Color.LightGray, 0f);
for (int i = 0; i < 50; i++)
{
int x = random.Next(0, bitmap.Width);
int y = random.Next(0, bitmap.Height);
graphics.DrawRectangle(pen, x, y, 1, 1);
}
char[] array = text.ToCharArray();
System.Drawing.StringFormat stringFormat = new System.Drawing.StringFormat(System.Drawing.StringFormatFlags.NoClip);
stringFormat.Alignment = System.Drawing.StringAlignment.Center;
stringFormat.LineAlignment = System.Drawing.StringAlignment.Center;
System.Drawing.Color[] array2 = new System.Drawing.Color[]
{
System.Drawing.Color.Black,
System.Drawing.Color.Red,
System.Drawing.Color.DarkBlue,
System.Drawing.Color.Green,
System.Drawing.Color.Brown,
System.Drawing.Color.DarkCyan,
System.Drawing.Color.Purple,
System.Drawing.Color.DarkGreen
};
for (int j = 0; j < array.Length; j++)
{
int num3 = random.Next(7);
random.Next(4);
System.Drawing.Font font = new System.Drawing.Font("Microsoft Sans Serif", 17f, System.Drawing.FontStyle.Bold);
System.Drawing.Brush brush = new System.Drawing.SolidBrush(array2[num3]);
System.Drawing.Point point = new System.Drawing.Point(14, 11);
float num4 = (float)random.Next(-num, num);
graphics.TranslateTransform((float)point.X, (float)point.Y);
graphics.RotateTransform(num4);
graphics.DrawString(array[j].ToString(), font, brush, 1f, 10f, stringFormat);
graphics.RotateTransform(-num4);
graphics.TranslateTransform(2f, (float)(-(float)point.Y));
}
System.IO.MemoryStream memoryStream = new System.IO.MemoryStream();
bitmap.Save(memoryStream, System.Drawing.Imaging.ImageFormat.Gif);
base.Response.ClearContent();
base.Response.ContentType = "image/gif";
base.Response.BinaryWrite(memoryStream.ToArray());
graphics.Dispose();
bitmap.Dispose();
}
catch
{
}
}
public void DownloadPDFFormat()
{
log4net.ILog logger = log4net.LogManager.GetLogger("File");
try
{
Document pdfReport = new Document(PageSize.A4, 100, 91, 100, 93);
System.IO.MemoryStream msReport = new System.IO.MemoryStream();
PdfWriter writer = PdfWriter.GetInstance(pdfReport, msReport);
pdfReport.Open();
DBConnectionHandler1 db = new DBConnectionHandler1();
SqlConnection cn = db.getconnection();
cn.Open();
SqlCommand cmd = new SqlCommand("select * from UploadLogo", cn);
SqlDataReader dr = cmd.ExecuteReader();
if (dr.Read())
{
if (dr.GetString(1).ToString() != "")
{
iTextSharp.text.Image image1 = iTextSharp.text.Image.GetInstance(@dr.GetString(1).ToString().Trim());
image1.SetAbsolutePosition(70, 100);
PdfContentByte by = writer.DirectContent;
PdfTemplate tp = by.CreateTemplate(170, 190);
tp.AddImage(image1);
by.AddTemplate(tp, 175, 660);
cn.Close();
dr.Close();
}
}
string datetime = string.Empty;
datetime = Convert.ToString(System.DateTime.Now);
string str = string.Empty;
if (txtitemno.Text != "")
{
str = (" Model_No. : " + txtitemno.Text);
}
if (ddlStatus.Text != "")
{
str = (" LostStatus : " + ddlStatus.Text);
}
if (ddllocation.Text != "")
{
str = (" Location : " + ddllocation.Text);
}
//if (txtfoundby.Text != "")
// str = (" Found By : " + txtfoundby.Text);
if (txtsignoutby.Text != "")
{
str = (" IssuedTo_Name : " + txtsignoutby.Text);
}
if (txtsigninby.Text != "")
{
str = (" IssuedBy_Name : " + txtsigninby.Text);
}
if (txtdatefrom.Text != "" && txtdateto.Text != "")
{
str = (" Date From :" + txtdatefrom.Text + " To :" + txtdateto.Text);
}
Phrase headerPhrase = new Phrase(" Item Report ", FontFactory.GetFont("Garamond", 14));
headerPhrase.Add(" Generated On : ");
headerPhrase.Add(datetime);
//headerPhrase.Add(" Searching Parameter : ");
//headerPhrase.Add(str);
HeaderFooter header = new HeaderFooter(headerPhrase, false);
header.Border = Rectangle.NO_BORDER;
header.Alignment = Element.ALIGN_CENTER;
header.Alignment = Element.ALIGN_BOTTOM;
pdfReport.Header = header;
pdfReport.Add(headerPhrase);
// Creates the Table
PdfPTable ptData = new PdfPTable(gvItemTable1.Columns.Count - 1);
ptData.SpacingBefore = 8;
ptData.DefaultCell.Padding = 1;
float[] headerwidths = new float[gvItemTable1.Columns.Count - 1]; // percentage
headerwidths[0] = 3.2F;
headerwidths[1] = 3.2F;
headerwidths[2] = 3.2F;
headerwidths[3] = 3.2F;
headerwidths[4] = 3.2F;
headerwidths[5] = 3.2F;
// headerwidths[6] = 3.2F;
// headerwidths[7] = 3.2F;
//headerwidths[8] = 3.2F;
ptData.SetWidths(headerwidths);
ptData.WidthPercentage = 100;
ptData.DefaultCell.HorizontalAlignment = Element.ALIGN_JUSTIFIED;
ptData.DefaultCell.VerticalAlignment = Element.ALIGN_MIDDLE;
//Insert the Table Headers
for (int intK = 0; intK < gvItemTable1.Columns.Count - 1; intK++)
{
PdfPCell cell = new PdfPCell();
cell.BorderWidth = 0.001f;
cell.BackgroundColor = new Color(200, 200, 200);
cell.BorderColor = new Color(100, 100, 100);
if (gvItemTable1.Columns[intK + 1].HeaderText.ToString() != "")
{
cell.Phrase = new Phrase(gvItemTable1.Columns[intK + 1].HeaderText.ToString(), FontFactory.GetFont("TIMES_ROMAN", BaseFont.WINANSI, 7, Font.BOLD));
ptData.AddCell(cell);
}
}
ptData.HeaderRows = 1; // this is the end of the table header
//Insert the Table Data
for (int intJ = 0; intJ < gvItemTable1.Items.Count; intJ++)
{
for (int intK = 0; intK < gvItemTable1.Columns.Count - 1; intK++)
{
PdfPCell cell = new PdfPCell();
cell.BorderWidth = 0.001f;
cell.BorderColor = new Color(100, 100, 100);
cell.BackgroundColor = new Color(250, 250, 250);
if (gvItemTable1.Items[intJ].Cells[intK + 3].Text.ToString() != "")
{
cell.Phrase = new Phrase(gvItemTable1.Items[intJ].Cells[intK + 3].Text.ToString(), FontFactory.GetFont("TIMES_ROMAN", BaseFont.WINANSI, 6));
ptData.AddCell(cell);
}
else
{
cell.Phrase = new Phrase("", FontFactory.GetFont("TIMES_ROMAN", BaseFont.WINANSI, 6));
ptData.AddCell(cell);
}
}
}
//Insert the Table
pdfReport.Add(ptData);
//Closes the Report and writes to Memory Stream
pdfReport.Close();
//Writes the Memory Stream Data to Response Object
Response.Clear();
Response.AddHeader("content-disposition", string.Format("attachment;filename=InventoryReport.pdf"));
Response.Charset = "";
Response.ContentType = "application/pdf";
Response.BinaryWrite(msReport.ToArray());
Response.End();
}
catch (Exception ex)
{
logger.Info(ex.Message);
}
}
static public int LzmaBenchmark(Int32 numIterations, UInt32 dictionarySize)
{
if (numIterations <= 0)
{
return(0);
}
if (dictionarySize < (1 << 18))
{
System.Console.WriteLine("\nError: dictionary size for benchmark must be >= 19 (512 KB)");
return(1);
}
System.Console.Write("\n Compressing Decompressing\n\n");
Compression.LZMA.Encoder encoder = new Compression.LZMA.Encoder();
Compression.LZMA.Decoder decoder = new Compression.LZMA.Decoder();
CoderPropID[] propIDs =
{
CoderPropID.DictionarySize,
};
object[] properties =
{
(Int32)(dictionarySize),
};
UInt32 kBufferSize = dictionarySize + kAdditionalSize;
UInt32 kCompressedBufferSize = (kBufferSize / 2) + kCompressedAdditionalSize;
encoder.SetCoderProperties(propIDs, properties);
System.IO.MemoryStream propStream = new System.IO.MemoryStream();
encoder.WriteCoderProperties(propStream);
byte[] propArray = propStream.ToArray();
CBenchRandomGenerator rg = new CBenchRandomGenerator();
rg.Set(kBufferSize);
rg.Generate();
CRC crc = new CRC();
crc.Init();
crc.Update(rg.Buffer, 0, rg.BufferSize);
CProgressInfo progressInfo = new CProgressInfo();
progressInfo.ApprovedStart = dictionarySize;
UInt64 totalBenchSize = 0;
UInt64 totalEncodeTime = 0;
UInt64 totalDecodeTime = 0;
UInt64 totalCompressedSize = 0;
MemoryStream inStream = new MemoryStream(rg.Buffer, 0, (int)rg.BufferSize);
MemoryStream compressedStream = new MemoryStream((int)kCompressedBufferSize);
CrcOutStream crcOutStream = new CrcOutStream();
for (Int32 i = 0; i < numIterations; i++)
{
progressInfo.Init();
inStream.Seek(0, SeekOrigin.Begin);
compressedStream.Seek(0, SeekOrigin.Begin);
encoder.Code(inStream, compressedStream, -1, -1, progressInfo);
TimeSpan sp2 = DateTime.UtcNow - progressInfo.Time;
UInt64 encodeTime = (UInt64)sp2.Ticks;
long compressedSize = compressedStream.Position;
if (progressInfo.InSize == 0)
{
throw (new Exception("Internal ERROR 1282"));
}
UInt64 decodeTime = 0;
for (int j = 0; j < 2; j++)
{
compressedStream.Seek(0, SeekOrigin.Begin);
crcOutStream.Init();
decoder.SetDecoderProperties(propArray);
UInt64 outSize = kBufferSize;
System.DateTime startTime = DateTime.UtcNow;
decoder.Code(compressedStream, crcOutStream, 0, (Int64)outSize, null);
TimeSpan sp = (DateTime.UtcNow - startTime);
decodeTime = (ulong)sp.Ticks;
if (crcOutStream.GetDigest() != crc.GetDigest())
{
throw (new Exception("CRC Error"));
}
}
UInt64 benchSize = kBufferSize - (UInt64)progressInfo.InSize;
PrintResults(dictionarySize, encodeTime, benchSize, false, 0);
System.Console.Write(" ");
PrintResults(dictionarySize, decodeTime, kBufferSize, true, (ulong)compressedSize);
System.Console.WriteLine();
totalBenchSize += benchSize;
totalEncodeTime += encodeTime;
totalDecodeTime += decodeTime;
totalCompressedSize += (ulong)compressedSize;
}
System.Console.WriteLine("---------------------------------------------------");
PrintResults(dictionarySize, totalEncodeTime, totalBenchSize, false, 0);
System.Console.Write(" ");
PrintResults(dictionarySize, totalDecodeTime,
kBufferSize * (UInt64)numIterations, true, totalCompressedSize);
System.Console.WriteLine(" Average");
return(0);
}
private void SavePic(BitmapSource bitmap)
{
TestingData.ProfilePhoto = new BitmapImage();
JpegBitmapEncoder encoder = new JpegBitmapEncoder();
encoder.Frames.Add(BitmapFrame.Create(bitmap));
encoder.QualityLevel = 100;
//HACK
TestingData.SubjectCode = "11";
var PICTURE_FILENAME = string.Format("{0}.jpg", TestingData.sheet._id);
//var PICTURE_FILENAME = "";
string serverPath = @"C:\PCTest\pic\";
var picPath = System.IO.Path.Combine(serverPath, PICTURE_FILENAME);
if (!Directory.Exists(serverPath))
{
Directory.CreateDirectory(serverPath);
}
using (var fstream = new System.IO.FileStream(picPath, FileMode.Create))
{
encoder.Save(fstream);
fstream.Flush();
fstream.Close();
fstream.Dispose();
webcam.Stop();
_isCameraOn = false;
}
var profileBitmap = BitmapFromSource(bitmap);
ProfilePhoto = profileBitmap;
TestingData.ProfilePhoto = new BitmapImage();
Uri uri = new Uri(picPath, UriKind.RelativeOrAbsolute);
TestingData.ProfilePhoto.BeginInit();
TestingData.ProfilePhoto.UriSource = uri;
TestingData.ProfilePhoto.CacheOption = BitmapCacheOption.OnLoad;
TestingData.ProfilePhoto.EndInit();
//save image to server
byte[] bit = new byte[0];
using (var stream = new System.IO.MemoryStream())
{
JpegBitmapEncoder encoder2 = new JpegBitmapEncoder();
encoder2.Frames.Add(BitmapFrame.Create(bitmap));
encoder2.QualityLevel = 100;
encoder2.Save(stream);
bit = stream.ToArray();
OnsiteServices svc = new OnsiteServices();
PicRequest picre = new PicRequest
{
FileName = PICTURE_FILENAME,
bytes = bit
};
svc.SavePic(picre);
stream.Flush();
stream.Close();
stream.Dispose();
}
}
public SCARFSurveyAnswerModels SCARFSurveyPost([FromBody] SCARFSurveyAnswerModels SCARFSurveyModel)
{
SCARFSurveyAnswerModels OnjSCARFSurvey = new SCARFSurveyAnswerModels();
try
{
if (String.IsNullOrEmpty(SCARFSurveyModel.WorkDayId.Trim()))
{
SCARFSurveyModel.IsErrrorMsg = true;
SCARFSurveyModel.Message = "WorkDay Id is Required";
}
else if (String.IsNullOrEmpty(SCARFSurveyModel.LearnerName.Trim()))
{
SCARFSurveyModel.IsErrrorMsg = true;
SCARFSurveyModel.Message = "Learner Name is Required";
}
else if (String.IsNullOrEmpty(SCARFSurveyModel.managerName.Trim()))
{
SCARFSurveyModel.IsErrrorMsg = true;
SCARFSurveyModel.Message = "Manager Name is Required";
}
else if (String.IsNullOrEmpty(SCARFSurveyModel.managerEmailID.Trim()))
{
SCARFSurveyModel.IsErrrorMsg = true;
SCARFSurveyModel.Message = "Manager Email Address is Required";
}
else if (SCARFSurveyModel.StatusText.Length > 300)
{
SCARFSurveyModel.IsErrrorMsg = true;
SCARFSurveyModel.Message = "StatusText length exceeded.";
}
else if (SCARFSurveyModel.CertaintyText.Length > 300)
{
SCARFSurveyModel.IsErrrorMsg = true;
SCARFSurveyModel.Message = "CertaintyText length exceeded.";
}
else if (SCARFSurveyModel.AutonomyText.Length > 300)
{
SCARFSurveyModel.IsErrrorMsg = true;
SCARFSurveyModel.Message = "AutonomyText length exceeded.";
}
else if (SCARFSurveyModel.RelatednessText.Length > 300)
{
SCARFSurveyModel.IsErrrorMsg = true;
SCARFSurveyModel.Message = "RelatednessText length exceeded.";
}
else if (SCARFSurveyModel.FairnessText.Length > 300)
{
SCARFSurveyModel.IsErrrorMsg = true;
SCARFSurveyModel.Message = "FairnessText length exceeded.";
}
if (SCARFSurveyModel.IsErrrorMsg == false)
{
SCARFSurveyModel.SCARFSurveyId = 0;
OnjSCARFSurvey.WorkDayId = SCARFSurveyModel.WorkDayId;
OnjSCARFSurvey.LearnerName = SCARFSurveyModel.LearnerName;
OnjSCARFSurvey.managerName = SCARFSurveyModel.managerName;
OnjSCARFSurvey.managerEmailID = SCARFSurveyModel.managerEmailID;
OnjSCARFSurvey.Status = SCARFSurveyModel.Status;
OnjSCARFSurvey.StatusText = SCARFSurveyModel.StatusText;
OnjSCARFSurvey.Certainty = SCARFSurveyModel.Certainty;
OnjSCARFSurvey.CertaintyText = SCARFSurveyModel.CertaintyText;
OnjSCARFSurvey.Autonomy = SCARFSurveyModel.Autonomy;
OnjSCARFSurvey.AutonomyText = SCARFSurveyModel.AutonomyText;
OnjSCARFSurvey.Relatedness = SCARFSurveyModel.Relatedness;
OnjSCARFSurvey.RelatednessText = SCARFSurveyModel.RelatednessText;
OnjSCARFSurvey.Fairness = SCARFSurveyModel.Fairness;
OnjSCARFSurvey.FairnessText = SCARFSurveyModel.FairnessText;
int result = BCBSDataAccess.SaveDataSCARFSurvey(OnjSCARFSurvey);
Util.LogInfo("Post", "After dsave call :" + result);
if (result > 0)
{
SCARFSurveyModel.SCARFSurveyId = result;
SCARFSurveyModel.IsErrrorMsg = false;
SCARFSurveyModel.Message = "Sucess";
var model = BCBSDataAccess.GetSCARFSurveyDataForPDF(SCARFSurveyModel.SCARFSurveyId);
if (model != null)
{
model.managerName = OnjSCARFSurvey.managerName;
string html = RenderViewToString("SCARFSurveyAnswer", "~/views/Shared/_SCARFSurveyAnswerPDF.cshtml", model);
model.ReportDate = model.ReportDate;
byte[] buffer = Render(html);
using (MemoryStream stream = new System.IO.MemoryStream())
{
Document pdfDoc = new Document(PageSize.A4, 20f, 20f, 20f, 20f);
PdfWriter writer = PdfWriter.GetInstance(pdfDoc, stream);
writer.CloseStream = false;
pdfDoc.Open();
StringReader sr = new StringReader(html);
XMLWorkerHelper.GetInstance().ParseXHtml(writer, pdfDoc, sr);
pdfDoc.Close();
buffer = stream.ToArray();
Attachment AttachmentMemoryStream = new Attachment(new MemoryStream(buffer), "SCARFSurveyAnswer" + SCARFSurveyModel.SCARFSurveyId + ".PDF");
//File Write in Folder With Out Mail
//string FilePathandName = @"C:\Logs\" + "SCARFSurveyAnswer" + SCARFSurveyModel.SCARFSurveyId + ".PDF";
//File.WriteAllBytes(FilePathandName, buffer);
#region Mail Sending
var subject = ConfigurationManager.AppSettings["MailSubject"] + model.LearnerName;
var physicalPath = Util.ResolveFileName(@"Template\EmailTemplate.txt");
var content = File.ReadAllText(physicalPath);
string emailContent = content.Replace("@LearnerName", model.LearnerName).Replace("@ManagerName", model.managerName);
Util.SendMail(OnjSCARFSurvey.managerEmailID, subject, emailContent, AttachmentMemoryStream);
}
#endregion
}
SCARFSurveyModel.WorkDayId = "";
SCARFSurveyModel.LearnerName = "";
SCARFSurveyModel.managerName = "";
SCARFSurveyModel.managerEmailID = "";
SCARFSurveyModel.Status = "";
SCARFSurveyModel.StatusText = "";
SCARFSurveyModel.Certainty = "";
SCARFSurveyModel.CertaintyText = "";
SCARFSurveyModel.Autonomy = "";
SCARFSurveyModel.AutonomyText = "";
SCARFSurveyModel.Relatedness = "";
SCARFSurveyModel.RelatednessText = "";
SCARFSurveyModel.Fairness = "";
SCARFSurveyModel.FairnessText = "";
}
else if (result == -1)
{
SCARFSurveyModel.SCARFSurveyId = 0;
SCARFSurveyModel.IsErrrorMsg = true;
SCARFSurveyModel.Message = "Duplicate WorkDayId";
SCARFSurveyModel.WorkDayId = "";
SCARFSurveyModel.LearnerName = "";
SCARFSurveyModel.managerName = "";
SCARFSurveyModel.managerEmailID = "";
SCARFSurveyModel.Status = "";
SCARFSurveyModel.StatusText = "";
SCARFSurveyModel.Certainty = "";
SCARFSurveyModel.CertaintyText = "";
SCARFSurveyModel.Autonomy = "";
SCARFSurveyModel.AutonomyText = "";
SCARFSurveyModel.Relatedness = "";
SCARFSurveyModel.RelatednessText = "";
SCARFSurveyModel.Fairness = "";
}
else
{
SCARFSurveyModel.SCARFSurveyId = 0;
SCARFSurveyModel.IsErrrorMsg = true;
SCARFSurveyModel.Message = "Fail";
}
SCARFSurveyModel.WorkDayId = OnjSCARFSurvey.WorkDayId;
SCARFSurveyModel.managerName = OnjSCARFSurvey.managerName;
SCARFSurveyModel.LearnerName = OnjSCARFSurvey.LearnerName;
SCARFSurveyModel.managerEmailID = OnjSCARFSurvey.managerEmailID;
SCARFSurveyModel.Status = OnjSCARFSurvey.Status;
SCARFSurveyModel.StatusText = OnjSCARFSurvey.StatusText;
SCARFSurveyModel.Certainty = OnjSCARFSurvey.Certainty;
SCARFSurveyModel.CertaintyText = OnjSCARFSurvey.CertaintyText;
SCARFSurveyModel.Autonomy = OnjSCARFSurvey.Autonomy;
SCARFSurveyModel.AutonomyText = OnjSCARFSurvey.AutonomyText;
SCARFSurveyModel.Relatedness = OnjSCARFSurvey.Relatedness;
SCARFSurveyModel.RelatednessText = OnjSCARFSurvey.RelatednessText;
SCARFSurveyModel.Fairness = OnjSCARFSurvey.Fairness;
SCARFSurveyModel.FairnessText = OnjSCARFSurvey.FairnessText;
SCARFSurveyModel.ReportDate = OnjSCARFSurvey.ReportDate;
}
}
catch (Exception ex)
{
string DetailsMessageError = null;
if (ex.InnerException != null)
{
DetailsMessageError = ex.InnerException.Message + " " + ex.StackTrace;
}
else
{
DetailsMessageError = ex.StackTrace;
}
Util.LoggError(new System.Diagnostics.StackFrame(0).GetMethod().Name,
ex.Message, DetailsMessageError);
SCARFSurveyModel.IsErrrorMsg = true;
SCARFSurveyModel.Message = "Exception block: " + DetailsMessageError;
}
return(SCARFSurveyModel);
}
public Texture FetchNew()
{
if (CachedTexture != null)
{
return(CachedTexture);
}
var texInfo = FetchTexInfo();
if (texInfo == null)
{
return(null);
}
int height = texInfo.Texture?.Header?.Height ?? 0;
int width = texInfo.Texture?.Header?.Width ?? 0;
int dxgiFormat = texInfo.Texture?.Header?.DXGIFormat ?? 0;
int mipmapCount = texInfo.Texture?.Mipmaps ?? 0;
uint fourCC = FourCCDX10;
int arraySize = texInfo.Texture?.Header?.TextureCount ?? 1;
if (arraySize < 1)
{
arraySize = 1;
}
DDS ppDdsHeader_ForDebug = null;
bool hasFullCubeDDSCaps2 = false;
int dataStartOffset = 0;
var br = new BinaryReaderEx(false, texInfo.DDSBytes);
bool hasHeader = br.ReadASCII(4) == "DDS ";
int blockSize = !hasHeader?GetBlockSize(texInfo.Texture.Format) : -1;
if (hasHeader)
{
DDS header = new DDS(texInfo.DDSBytes);
height = header.dwHeight;
width = header.dwWidth;
mipmapCount = header.dwMipMapCount;
fourCC = BitConverter.ToUInt32(Encoding.ASCII.GetBytes(header.ddspf.dwFourCC), 0);
if ((header.dwCaps2 & FullCubeDDSCaps2) == FullCubeDDSCaps2)
{
hasFullCubeDDSCaps2 = true;
}
if (header.header10 != null)
{
arraySize = (int)header.header10.arraySize;
dxgiFormat = (int)header.header10.dxgiFormat;
}
dataStartOffset = header.DataOffset;
ppDdsHeader_ForDebug = header;
}
else
{
if (texInfo.Platform == TPF.TPFPlatform.PS4)
{
switch (texInfo.Texture.Format)
{
case 0:
case 1:
case 25:
case 103:
case 108:
case 109:
fourCC = FourCCDX10; //DX10
break;
case 5:
case 100:
case 102:
case 106:
case 107:
case 110:
fourCC = FourCCDX10; //DX10
break;
case 22:
fourCC = 0x71;
break;
case 105:
fourCC = 0;
break;
}
}
else if (texInfo.Platform == TPF.TPFPlatform.PS3)
{
switch (texInfo.Texture.Format)
{
case 0:
case 1:
fourCC = 0x31545844;
break;
case 5:
fourCC = 0x35545844;
break;
case 9:
case 10:
fourCC = 0;
break;
}
}
if (mipmapCount == 0)
{
// something Hork came up with :fatcat:
mipmapCount = (int)(1 + Math.Floor(Math.Log(Math.Max(width, height), 2)));
}
dataStartOffset = 0;
}
SurfaceFormat surfaceFormat;
if (fourCC == FourCCDX10)
{
// See if there are DX9 textures
int fmt = dxgiFormat;
if (fmt == 70 || fmt == 71 || fmt == 72)
{
surfaceFormat = SurfaceFormat.Dxt1;
}
else if (fmt == 73 || fmt == 74 || fmt == 75)
{
surfaceFormat = SurfaceFormat.Dxt3;
}
else if (fmt == 76 || fmt == 77 || fmt == 78)
{
surfaceFormat = SurfaceFormat.Dxt5;
}
else if (fmt == 79 || fmt == 80 || fmt == 81)
{
surfaceFormat = SurfaceFormat.ATI1;
}
else if (fmt == 82 || fmt == 83 || fmt == 84)
{
surfaceFormat = SurfaceFormat.ATI2;
}
else if (fmt == 95)
{
surfaceFormat = SurfaceFormat.BC6HUF16;
}
else if (fmt == 96)
{
surfaceFormat = SurfaceFormat.BC6HSF16;
}
else if (fmt == 94)
{
surfaceFormat = SurfaceFormat.BC6HTypeless;
}
else if (fmt == 97 || fmt == 98 || fmt == 99)
{
surfaceFormat = SurfaceFormat.BC7;
}
else
{
// No DX10 texture support in monogame yet
Console.WriteLine($"Unable to load {TexName} because it uses DX10+ exclusive texture type.");
CachedTexture = Main.DEFAULT_TEXTURE_MISSING_CUBE;
TPFReference = null;
return((TextureCube)CachedTexture);
}
}
else
{
surfaceFormat = GetSurfaceFormatFromString(System.Text.Encoding.ASCII.GetString(BitConverter.GetBytes(fourCC)));
}
bool mipmaps = mipmapCount > 0;
// apply memes
if (texInfo.Platform == TPF.TPFPlatform.PC || texInfo.Platform == TPF.TPFPlatform.PS3)
{
width = IsCompressedFormat(surfaceFormat) ? ((width + 3) & ~0x3) : width;
height = IsCompressedFormat(surfaceFormat) ? ((height + 3) & ~0x3) : height;
mipmaps = true;
}
else if (texInfo.Platform == TPF.TPFPlatform.PS4)
{
width = (int)(Math.Ceiling(width / 4f) * 4f);
height = (int)(Math.Ceiling(height / 4f) * 4f);
}
//else if (texInfo.Platform == TPF.TPFPlatform.PS3)
//{
// throw new NotImplementedException();
//}
else
{
throw new NotImplementedException();
}
Texture tex = null;
int paddedWidth = 0;
int paddedHeight = 0;
int paddedSize = 0;
int copyOffset = dataStartOffset;
bool isCubeMap = (texInfo.Texture?.Type == TPF.TexType.Cubemap) || arraySize >= 6 || hasFullCubeDDSCaps2;
if (isCubeMap)
{
tex = new TextureCube(GFX.Device, width, true, surfaceFormat);
}
else
{
tex = new Texture2D(GFX.Device, width, height,
mipmapCount > 1,
surfaceFormat,
arraySize);
}
if (texInfo.Platform == TPF.TPFPlatform.PC || texInfo.Platform == TPF.TPFPlatform.PS3)
{
for (int i = 0; i < arraySize; i++)
{
for (int j = 0; j < mipmapCount; j++)
{
var mipInfo = GetMipInfo(surfaceFormat, width, height, j, isCubeMap);
paddedSize = mipInfo.ByteCount;
//if (surfaceFormat == SurfaceFormat.Dxt1 || surfaceFormat == SurfaceFormat.Dxt1SRgb)
// paddedSize /= 2;
//if (GameDataManager.GameType == GameDataManager.GameTypes.DS1R && surfaceFormat == SurfaceFormat.Dxt1)
// paddedSize /= 2;
if (isCubeMap)
{
((TextureCube)tex).SetData((CubeMapFace)i, j, null, br.GetBytes(copyOffset, paddedSize), 0, paddedSize);
}
else
{
try
{
((Texture2D)tex).SetData(j, i, null, br.GetBytes(copyOffset, paddedSize), 0, paddedSize);
}
catch (ArgumentException)
{
try
{
((Texture2D)tex).SetData(j, i, null, br.GetBytes(copyOffset, paddedSize / 2), 0, paddedSize);
}
catch
{
}
}
}
copyOffset += paddedSize;
}
}
}
else if (texInfo.Platform == TPF.TPFPlatform.PS4)
{
if (isCubeMap)
{
throw new NotImplementedException();
//for (int i = 0; i < arraySize; i++)
//{
// int currentWidth = width;
// int currentHeight = height;
// void SetPaddedSize_PS4(int w, int h)
// {
// if (isCubeMap)
// {
// if (texInfo.Texture.Format == 22)
// {
// paddedWidth = (int)(Math.Ceiling(w / 8f) * 8f);
// paddedHeight = (int)(Math.Ceiling(h / 8f) * 8f);
// paddedSize = paddedWidth * paddedHeight * blockSize;
// }
// else
// {
// paddedWidth = (int)(Math.Ceiling(w / 32f) * 32f);
// paddedHeight = (int)(Math.Ceiling(h / 32f) * 32f);
// paddedSize = (int)(Math.Ceiling(paddedWidth / 4f) * Math.Ceiling(paddedHeight / 4f) * blockSize);
// }
// }
// else
// {
// if (texInfo.Texture.Format == 105)
// {
// paddedWidth = w;
// paddedHeight = h;
// paddedSize = paddedWidth * paddedHeight * blockSize;
// }
// else
// {
// paddedWidth = (int)(Math.Ceiling(w / 32f) * 32f);
// paddedHeight = (int)(Math.Ceiling(h / 32f) * 32f);
// paddedSize = (int)(Math.Ceiling(paddedWidth / 4f) * Math.Ceiling(paddedHeight / 4f) * blockSize);
// }
// }
// }
// SetPaddedSize_PS4(currentWidth, currentHeight);
// copyOffset = dataStartOffset + paddedSize * i;
// for (int j = 0; j < mipmapCount; j++)
// {
// if (j > 0)
// {
// SetPaddedSize_PS4(currentWidth, currentHeight);
// copyOffset += paddedSize * i;
// }
// var deswizzler = new DDSDeswizzler(texInfo.Texture.Format, br.GetBytes(copyOffset, paddedSize), blockSize);
// byte[] deswizzledMipMap = null;
// deswizzler.CreateOutput();
// deswizzler.DDSWidth = paddedWidth;
// deswizzler.DeswizzleDDSBytesPS4(currentWidth, currentHeight);
// deswizzledMipMap = deswizzler.OutputBytes;
// var finalBytes = (deswizzledMipMap ?? deswizzler.InputBytes);
// using (var tempMemStream = new System.IO.MemoryStream(finalBytes.Length))
// {
// var tempWriter = new BinaryWriter(tempMemStream);
// if (texInfo.Texture.Format == 22)
// {
// for (int h = 0; h < currentHeight; h++)
// {
// tempWriter.Write(finalBytes, h * paddedWidth * blockSize, currentWidth * blockSize);
// }
// }
// else
// {
// for (int h = 0; h < (int)Math.Ceiling(currentHeight / 4f); h++)
// {
// tempWriter.Write(finalBytes, (int)(h * Math.Ceiling(paddedWidth / 4f) * blockSize), (int)(Math.Ceiling(currentWidth / 4f) * blockSize));
// }
// }
// if (isCubeMap)
// {
// ((TextureCube)tex).SetData((CubeMapFace)j, i, null, tempMemStream.ToArray(), 0, finalBytes.Length);
// }
// else
// {
// ((Texture2D)tex).SetData(j, i, null, tempMemStream.ToArray(), 0, finalBytes.Length);
// }
// }
// copyOffset += (arraySize - i) * paddedSize + paddedSize * 2;
// if (currentWidth > 1)
// currentWidth /= 2;
// if (currentHeight > 1)
// currentHeight /= 2;
// }
//}
}
else
{
int currentWidth = width;
int currentHeight = height;
for (int j = 0; j < mipmapCount; j++)
{
if (texInfo.Texture.Format == 105)
{
paddedWidth = currentWidth;
paddedHeight = currentHeight;
paddedSize = paddedWidth * paddedHeight * blockSize;
}
else
{
paddedWidth = (int)(Math.Ceiling(currentWidth / 32f) * 32f);
paddedHeight = (int)(Math.Ceiling(currentHeight / 32f) * 32f);
paddedSize = (int)(Math.Ceiling(paddedWidth / 4f) * Math.Ceiling(paddedHeight / 4f) * blockSize);
}
var deswizzler = new DDSDeswizzler(texInfo.Texture.Format, br.GetBytes(copyOffset, paddedSize), blockSize);
byte[] deswizzledMipMap = null;
deswizzler.CreateOutput();
deswizzler.DDSWidth = paddedWidth;
deswizzler.DeswizzleDDSBytesPS4(currentWidth, currentHeight);
deswizzledMipMap = deswizzler.OutputBytes;
var finalBytes = (deswizzledMipMap ?? deswizzler.InputBytes);
using (var tempMemStream = new System.IO.MemoryStream())
{
var tempWriter = new BinaryWriter(tempMemStream);
if (texInfo.Texture.Format == 105)
{
tempWriter.Write(finalBytes);
}
else
{
for (int h = 0; h < (int)Math.Ceiling(currentHeight / 4f); h++)
{
tempWriter.Write(finalBytes, (int)(h * Math.Ceiling(paddedWidth / 4f) * blockSize), (int)(Math.Ceiling(currentWidth / 4f) * blockSize));
}
}
((Texture2D)tex).SetData(j, 0, null, tempMemStream.ToArray(), 0, (int)tempMemStream.Length);
}
copyOffset += paddedSize;
if (currentWidth > 1)
{
currentWidth /= 2;
}
if (currentHeight > 1)
{
currentHeight /= 2;
}
}
}
}
CachedTexture?.Dispose();
CachedTexture = tex;
return(CachedTexture);
}
/// <summary>
/// 插入到excel的cell
/// </summary>
/// <param name="fileName">excel文件名</param>
/// <param name="dst">目标 (行，列，值)</param>
/// <param name="sheetName">默认sheetName,可以不写</param>
public static void WriteToExcelCell(string fileName, List <Tuple <int, int, object, string> > customCell, string sheetName = "sheet1")
{
NPOI.HSSF.UserModel.HSSFWorkbook book = new NPOI.HSSF.UserModel.HSSFWorkbook();
NPOI.SS.UserModel.ISheet sheet = book.CreateSheet(sheetName);
foreach (var item in customCell)
{
int r = item.Item1;
int c = item.Item2;
object content = item.Item3;
NPOI.SS.UserModel.IRow row = null;
if (sheet.GetRow(r) == null)
{
row = sheet.CreateRow(r);
}
else
{
row = sheet.GetRow(r);
}
NPOI.SS.UserModel.ICell cell = row.CreateCell(c);
cell.SetCellValue(content.ToString());
string objType = item.Item4.ToString();
#region 类型转换
try
{
switch (objType)
{
case "System.String": //字符串类型
cell.SetCellValue(content.ToString());
break;
case "System.DateTime": //日期类型
DateTime dateV;
DateTime.TryParse(content.ToString(), out dateV);
string strtime = dateV.ToString("yyyy-MM-dd HH:mm:ss");
if (strtime.Substring(11, 8) == "00:00:00")
{
strtime = dateV.ToString("yyyy-MM-dd");
}
cell.SetCellValue(strtime);
break;
case "System.Boolean": //布尔型
bool boolV = false;
bool.TryParse(content.ToString(), out boolV);
cell.SetCellValue(boolV);
break;
case "System.Int16": //整型
cell.SetCellValue(Convert.ToInt16(content));
break;
case "System.Int32":
cell.SetCellValue(Convert.ToInt32(content));
break;
case "System.Int64":
cell.SetCellValue(Convert.ToInt64(content));
break;
case "System.Byte":
cell.SetCellValue(Convert.ToInt32(content));
break;
case "System.Decimal": //浮点型
cell.SetCellValue(Convert.ToDouble(content));
break;
case "System.Double":
cell.SetCellValue(Convert.ToDouble(content));
break;
case "System.DBNull": //空值处理
cell.SetCellValue("");
break;
default:
cell.SetCellValue(content.ToString());
break;
}
}
catch
{
cell.SetCellValue(content.ToString());
}
#endregion
}
// 写入到客户端
System.IO.MemoryStream ms = new System.IO.MemoryStream();
book.Write(ms);
byte[] b = ms.ToArray();
File.WriteAllBytes(fileName, b);
book = null;
ms.Close();
ms.Dispose();
}
/// <summary>
/// 创建随机码图片
/// </summary>
/// <param name="randomcode">随机码</param>
protected void CreateImage(string randomcode)
{
int randAngle = 45; //随机转动角度
int mapwidth = (int)(randomcode.Length * 16);
Bitmap map = new Bitmap(mapwidth, 28); //创建图片背景，设置其长宽
Graphics graph = Graphics.FromImage(map);
graph.Clear(Color.AliceBlue);
graph.DrawRectangle(new Pen(Color.Black, 0), 0, 0, map.Width - 1, map.Height - 1); //画一个边框
Random rand = new Random();
// 生成背景噪点
Pen blackPen = new Pen(Color.LightGray, 0);
for (int i = 0; i < 50; i++)
{
int x = rand.Next(0, map.Width);
int y = rand.Next(0, map.Height);
graph.DrawRectangle(blackPen, x, y, 1, 1);
}
//验证码旋转，防止机器识别
char[] chars = randomcode.ToCharArray(); //拆散字符串成单字符数组
//文字距中
StringFormat format = new StringFormat(StringFormatFlags.NoClip);
format.Alignment = StringAlignment.Center;
format.LineAlignment = StringAlignment.Center;
// 定义随机颜色列表
Color[] c = { Color.Black, Color.Red, Color.DarkBlue, Color.Green, Color.Orange, Color.Brown, Color.DarkCyan, Color.Purple };
// 定义随机字体字体
string[] font = { "Verdana", "Microsoft Sans Serif", "Comic Sans MS", "Arial", "宋体" };
for (int i = 0; i < chars.Length; i++)
{
int cindex = rand.Next(7);
int findex = rand.Next(5);
Font f = new System.Drawing.Font(font[findex], 16, System.Drawing.FontStyle.Bold); // 字体样式(参数2为字体大小)
Brush b = new System.Drawing.SolidBrush(c[cindex]);
Point dot = new Point(11, 11); // 括号内数值越大，字符间距越大
float angle = rand.Next(0, randAngle); // 转动的度数，如果将0改为-randAngle，那么旋转角度为-45度～45度
graph.TranslateTransform(dot.X, dot.Y);
graph.RotateTransform(angle);
graph.DrawString(chars[i].ToString(), f, b, 2, 6, format); // 第4、5个参数控制左、上间距
graph.RotateTransform(-angle);
graph.TranslateTransform(2, -dot.Y);
}
//生成图片
System.IO.MemoryStream ms = new System.IO.MemoryStream();
map.Save(ms, System.Drawing.Imaging.ImageFormat.Gif);
Response.ClearContent();
Response.ContentType = "image/gif";
Response.BinaryWrite(ms.ToArray());
graph.Dispose();
map.Dispose();
}
static public byte[] Create(HttpPostedFileBase FileUploader)
{
if (FileUploader == null)
{
return(null);
}
if (!FileUploader.ContentType.StartsWith("image"))
{
return(null);
}
var _Bytes = new byte[FileUploader.ContentLength];
FileUploader.InputStream.Read(_Bytes, 0, FileUploader.ContentLength);
using (var ms = new MemoryStream(_Bytes))
{
Bitmap imgIn = new Bitmap(ms);
double y = imgIn.Height;
double x = imgIn.Width;
int height = 100;
int width = 200;
int Radius = 100;
double factor = 1;
if (width > 0)
{
factor = width / x;
}
else if (height > 0)
{
factor = height / y;
}
System.IO.MemoryStream outStream = new System.IO.MemoryStream();
Bitmap imgOut = new Bitmap((int)(x * factor), (int)(y * factor));
imgOut.SetResolution(72, 72);
Graphics g = Graphics.FromImage(imgOut);
g.DrawImage(imgIn, new Rectangle(0, 0, (int)(factor * x), (int)(factor * y)), new Rectangle(0, 0, (int)x, (int)y), GraphicsUnit.Pixel);
Brush brush = new System.Drawing.SolidBrush(Color.Transparent);
for (int i = 0; i < 4; i++)
{
Point[] CornerUpLeft = new Point[3];
CornerUpLeft[0].X = 0;
CornerUpLeft[0].Y = 0;
CornerUpLeft[1].X = Radius;
CornerUpLeft[1].Y = 0;
CornerUpLeft[2].X = 0;
CornerUpLeft[2].Y = Radius;
System.Drawing.Drawing2D.GraphicsPath pathCornerUpLeft =
new System.Drawing.Drawing2D.GraphicsPath();
pathCornerUpLeft.AddArc(CornerUpLeft[0].X, CornerUpLeft[0].Y,
Radius, Radius, 180, 90);
pathCornerUpLeft.AddLine(CornerUpLeft[0].X, CornerUpLeft[0].Y,
CornerUpLeft[1].X, CornerUpLeft[1].Y);
pathCornerUpLeft.AddLine(CornerUpLeft[0].X, CornerUpLeft[0].Y,
CornerUpLeft[2].X, CornerUpLeft[2].Y);
g.FillPath(brush, pathCornerUpLeft);
pathCornerUpLeft.Dispose();
imgOut.RotateFlip(RotateFlipType.Rotate90FlipNone);
}
imgOut.Save(outStream, ImageFormat.Png);
return(outStream.ToArray());
}
}
/// <summary>
/// Compare two documents.
///
/// Compares two input documents. Documents must be in the same format.
/// </summary>
/// <param name="file1">The first document to compare.</param>
/// <param name="file2">The second document to compare.</param>
/// <param name="file1ContentType">The content type of file1. (optional)</param>
/// <param name="file2ContentType">The content type of file2. (optional)</param>
/// <param name="file1Label">A text label for the first document. (optional, default to file_1)</param>
/// <param name="file2Label">A text label for the second document. (optional, default to file_2)</param>
/// <param name="model">The analysis model to be used by the service. For the **Element classification** and
/// **Compare two documents** methods, the default is `contracts`. For the **Extract tables** method, the
/// default is `tables`. These defaults apply to the standalone methods as well as to the methods' use in
/// batch-processing requests. (optional)</param>
/// <returns><see cref="CompareReturn" />CompareReturn</returns>
public DetailedResponse <CompareReturn> CompareDocuments(System.IO.MemoryStream file1, System.IO.MemoryStream file2, string file1ContentType = null, string file2ContentType = null, string file1Label = null, string file2Label = null, string model = null)
{
if (file1 == null)
{
throw new ArgumentNullException("`file1` is required for `CompareDocuments`");
}
if (file2 == null)
{
throw new ArgumentNullException("`file2` is required for `CompareDocuments`");
}
if (string.IsNullOrEmpty(VersionDate))
{
throw new ArgumentNullException("versionDate cannot be null.");
}
DetailedResponse <CompareReturn> result = null;
try
{
var formData = new MultipartFormDataContent();
if (file1 != null)
{
var file1Content = new ByteArrayContent(file1.ToArray());
System.Net.Http.Headers.MediaTypeHeaderValue contentType;
System.Net.Http.Headers.MediaTypeHeaderValue.TryParse(file1ContentType, out contentType);
file1Content.Headers.ContentType = contentType;
formData.Add(file1Content, "file_1", "filename");
}
if (file2 != null)
{
var file2Content = new ByteArrayContent(file2.ToArray());
System.Net.Http.Headers.MediaTypeHeaderValue contentType;
System.Net.Http.Headers.MediaTypeHeaderValue.TryParse(file2ContentType, out contentType);
file2Content.Headers.ContentType = contentType;
formData.Add(file2Content, "file_2", "filename");
}
IClient client = this.Client;
SetAuthentication();
var restRequest = client.PostAsync($"{this.Endpoint}/v1/comparison");
restRequest.WithArgument("version", VersionDate);
restRequest.WithHeader("Accept", "application/json");
if (!string.IsNullOrEmpty(file1Label))
{
restRequest.WithArgument("file_1_label", file1Label);
}
if (!string.IsNullOrEmpty(file2Label))
{
restRequest.WithArgument("file_2_label", file2Label);
}
if (!string.IsNullOrEmpty(model))
{
restRequest.WithArgument("model", model);
}
restRequest.WithBodyContent(formData);
restRequest.WithHeaders(Common.GetSdkHeaders("compare-comply", "v1", "CompareDocuments"));
restRequest.WithHeaders(customRequestHeaders);
ClearCustomRequestHeaders();
result = restRequest.As <CompareReturn>().Result;
if (result == null)
{
result = new DetailedResponse <CompareReturn>();
}
}
catch (AggregateException ae)
{
throw ae.Flatten();
}
return(result);
}
/// <summary>
/// Submit a batch-processing request.
///
/// Run Compare and Comply methods over a collection of input documents.
///
/// **Important:** Batch processing requires the use of the [IBM Cloud Object Storage
/// service](https://cloud.ibm.com/docs/services/cloud-object-storage?topic=cloud-object-storage-about#about-ibm-cloud-object-storage).
/// The use of IBM Cloud Object Storage with Compare and Comply is discussed at [Using batch
/// processing](https://cloud.ibm.com/docs/services/compare-comply?topic=compare-comply-batching#before-you-batch).
/// </summary>
/// <param name="function">The Compare and Comply method to run across the submitted input documents.</param>
/// <param name="inputCredentialsFile">A JSON file containing the input Cloud Object Storage credentials. At a
/// minimum, the credentials must enable `READ` permissions on the bucket defined by the `input_bucket_name`
/// parameter.</param>
/// <param name="inputBucketLocation">The geographical location of the Cloud Object Storage input bucket as
/// listed on the **Endpoint** tab of your Cloud Object Storage instance; for example, `us-geo`, `eu-geo`, or
/// `ap-geo`.</param>
/// <param name="inputBucketName">The name of the Cloud Object Storage input bucket.</param>
/// <param name="outputCredentialsFile">A JSON file that lists the Cloud Object Storage output credentials. At a
/// minimum, the credentials must enable `READ` and `WRITE` permissions on the bucket defined by the
/// `output_bucket_name` parameter.</param>
/// <param name="outputBucketLocation">The geographical location of the Cloud Object Storage output bucket as
/// listed on the **Endpoint** tab of your Cloud Object Storage instance; for example, `us-geo`, `eu-geo`, or
/// `ap-geo`.</param>
/// <param name="outputBucketName">The name of the Cloud Object Storage output bucket.</param>
/// <param name="model">The analysis model to be used by the service. For the **Element classification** and
/// **Compare two documents** methods, the default is `contracts`. For the **Extract tables** method, the
/// default is `tables`. These defaults apply to the standalone methods as well as to the methods' use in
/// batch-processing requests. (optional)</param>
/// <returns><see cref="BatchStatus" />BatchStatus</returns>
public DetailedResponse <BatchStatus> CreateBatch(string function, System.IO.MemoryStream inputCredentialsFile, string inputBucketLocation, string inputBucketName, System.IO.MemoryStream outputCredentialsFile, string outputBucketLocation, string outputBucketName, string model = null)
{
if (string.IsNullOrEmpty(function))
{
throw new ArgumentNullException("`function` is required for `CreateBatch`");
}
if (inputCredentialsFile == null)
{
throw new ArgumentNullException("`inputCredentialsFile` is required for `CreateBatch`");
}
if (string.IsNullOrEmpty(inputBucketLocation))
{
throw new ArgumentNullException("`inputBucketLocation` is required for `CreateBatch`");
}
if (string.IsNullOrEmpty(inputBucketName))
{
throw new ArgumentNullException("`inputBucketName` is required for `CreateBatch`");
}
if (outputCredentialsFile == null)
{
throw new ArgumentNullException("`outputCredentialsFile` is required for `CreateBatch`");
}
if (string.IsNullOrEmpty(outputBucketLocation))
{
throw new ArgumentNullException("`outputBucketLocation` is required for `CreateBatch`");
}
if (string.IsNullOrEmpty(outputBucketName))
{
throw new ArgumentNullException("`outputBucketName` is required for `CreateBatch`");
}
if (string.IsNullOrEmpty(VersionDate))
{
throw new ArgumentNullException("versionDate cannot be null.");
}
DetailedResponse <BatchStatus> result = null;
try
{
var formData = new MultipartFormDataContent();
if (inputCredentialsFile != null)
{
var inputCredentialsFileContent = new ByteArrayContent(inputCredentialsFile.ToArray());
System.Net.Http.Headers.MediaTypeHeaderValue contentType;
System.Net.Http.Headers.MediaTypeHeaderValue.TryParse("application/json", out contentType);
inputCredentialsFileContent.Headers.ContentType = contentType;
formData.Add(inputCredentialsFileContent, "input_credentials_file", "filename");
}
if (inputBucketLocation != null)
{
var inputBucketLocationContent = new StringContent(inputBucketLocation, Encoding.UTF8, HttpMediaType.TEXT_PLAIN);
inputBucketLocationContent.Headers.ContentType = null;
formData.Add(inputBucketLocationContent, "input_bucket_location");
}
if (inputBucketName != null)
{
var inputBucketNameContent = new StringContent(inputBucketName, Encoding.UTF8, HttpMediaType.TEXT_PLAIN);
inputBucketNameContent.Headers.ContentType = null;
formData.Add(inputBucketNameContent, "input_bucket_name");
}
if (outputCredentialsFile != null)
{
var outputCredentialsFileContent = new ByteArrayContent(outputCredentialsFile.ToArray());
System.Net.Http.Headers.MediaTypeHeaderValue contentType;
System.Net.Http.Headers.MediaTypeHeaderValue.TryParse("application/json", out contentType);
outputCredentialsFileContent.Headers.ContentType = contentType;
formData.Add(outputCredentialsFileContent, "output_credentials_file", "filename");
}
if (outputBucketLocation != null)
{
var outputBucketLocationContent = new StringContent(outputBucketLocation, Encoding.UTF8, HttpMediaType.TEXT_PLAIN);
outputBucketLocationContent.Headers.ContentType = null;
formData.Add(outputBucketLocationContent, "output_bucket_location");
}
if (outputBucketName != null)
{
var outputBucketNameContent = new StringContent(outputBucketName, Encoding.UTF8, HttpMediaType.TEXT_PLAIN);
outputBucketNameContent.Headers.ContentType = null;
formData.Add(outputBucketNameContent, "output_bucket_name");
}
IClient client = this.Client;
SetAuthentication();
var restRequest = client.PostAsync($"{this.Endpoint}/v1/batches");
restRequest.WithArgument("version", VersionDate);
restRequest.WithHeader("Accept", "application/json");
if (!string.IsNullOrEmpty(function))
{
restRequest.WithArgument("function", function);
}
if (!string.IsNullOrEmpty(model))
{
restRequest.WithArgument("model", model);
}
restRequest.WithBodyContent(formData);
restRequest.WithHeaders(Common.GetSdkHeaders("compare-comply", "v1", "CreateBatch"));
restRequest.WithHeaders(customRequestHeaders);
ClearCustomRequestHeaders();
result = restRequest.As <BatchStatus>().Result;
if (result == null)
{
result = new DetailedResponse <BatchStatus>();
}
}
catch (AggregateException ae)
{
throw ae.Flatten();
}
return(result);
}
/*Performing AES encryption of a sting or file at a path provided using a key also provided to the metode.
* The first step is to check the key and insure that the value provided is
* not less than 16 charters in lenght. As the text box the key is taken from
* will not allow the user to input more than 16 charters there is no need to
* check if the user has entered more than 16 charters.
* The next step will be for the string of plain text or the the data read from the file
* and key to be convered to ascii.
* Next the memory stream that will store our result is inisalised for use as well
* as the crypto stream that will perform the encryption using the symmetrical algorthm
* object that has been created with the type of encryption as well as the key
* and padding type. After this it is required for this system that the result
* be converted to Hex before it can be output in a text box for the user. If
* the data is not converted to Hex then the data will be compramised when it
* is output in the text box because not all ascii values when convered back
* to a string can be displayed in a text box. This will corupt the data and
* result in errors when trying to decrypt the corupted data.
* If the file encryption is used the data will be writen back to the file
* and a result message will be displaied to the user.*/
private string performRIJNDAELEncryption(string s, string k, byte[] iv)
{
if (k.Length < keySizebit / 8)
{
MessageBox.Show("Please insure your Key is " + keySizebit / 8 + " charters long");
return("");
}
if (iv.Length < 16)
{
MessageBox.Show("Please insure your IV is 16 charters long");
return("");
}
else
{
desObj.IV = iv;
}
//Switch used to check the type of data being encrypted, data can be a text string or a path to a file.
switch (dataTypeForEncrypt)
{
case Data_Type.TEXT:
plainbytes = Encoding.ASCII.GetBytes(s);
break;
case Data_Type.FILE:
path = s;
if (copyFile)
{
copy_File(path); /*This Will create a copy of the file you wish to encrypt so that you do not loose your data if you
* have had an issue with the encryption or have lost your key.*/
}
try
{
plainbytes = File.ReadAllBytes(path); /*Reads the data as bytes to an array from the file of the path
* provided.*/
}
catch (Exception ex)
{
MessageBox.Show("Please enter a valid file path or insure the path is pointing to the correct file.\n" + ex.Message);
return("");
}
break;
}
//Stores the key provided as Ascii values.
desObj.Key = Encoding.ASCII.GetBytes(k);
System.IO.MemoryStream ms = new System.IO.MemoryStream();
CryptoStream cs = new CryptoStream(ms, desObj.CreateEncryptor(), CryptoStreamMode.Write);
cs.Write(plainbytes, 0, plainbytes.Length);
cs.Close();
chipherBytes = ms.ToArray();
ms.Close();
//Switch used to check the type of data being encrypted, data can be a text string or a path to a file.
switch (dataTypeForEncrypt)
{
case Data_Type.TEXT:
s = ByteArrayToString(chipherBytes); //Converts the bytes result to a string and returns it as the result.
break;
case Data_Type.FILE:
File.WriteAllBytes(path, chipherBytes);
s = getFileNameFromPath(path) + " File encrypted.\n"; //shows to the user that there file has been encrypted.
break;
}
return(s);
}
/*Performs AES decryption to an encrypted string or file at a given path using the key that is
* passed to the method. It will first check that the key the user has passed meets the requirements of the algorithim,
* using the AES encryption will require the use of a key that is 16 charters in lenght.
* If the user enters a key that is less than 16 charters in lenght they will given an error message
* shown as a message box requesting that they increase the key size. The metode will also return
* an empty string and not perform the decription.
* Due to an issue with text boxes displaying ascii values that cannot be displayed that would simply
* show as "?", this would effectavly corrupt the encrypted string. To avoide this I convert the encrypted
* data to HEX and out put it as a string. This means that during the decryption of the data I must convert
* the data back to ascii in order to perform the decryption. To pervent this from happening as well as
* using a Hex value I also use a try catch to catch the exception throuwn and create a message box that
* will give information on the error instead of crashing the program. If the user is decrypting a file
* the result will be writen back to the file as well as a message to the user of the result.*/
private string performRIJNDAELDecryption(string s, string k, byte[] iv)
{
if (k.Length < keySizebit / 8)
{
MessageBox.Show("Please insure your Key is " + keySizebit / 8 + " charters long");
return("");
}
if (iv.Length < 16)
{
MessageBox.Show("Please insure your IV is 16 charters long");
return("");
}
else
{
desObj.IV = iv;
}
//Switch used to check the type of data being decrypted, data can be a text string or a path to a file.
switch (dataTypeForEncrypt)
{
case Data_Type.TEXT:
chipherBytes = StringToByteArray(s);
break;
case Data_Type.FILE:
path = s;
try
{
chipherBytes = File.ReadAllBytes(path); /*Reads the data as bytes to an array from the file of the path
* provided.*/
}
catch (Exception ex)
{
MessageBox.Show("Please enter a valid file path or insure the path is pointing to the correct file.\n" + ex.Message);
return("");
}
break;
}
try
{
//Stores the key provided as Ascii values.
desObj.Key = Encoding.ASCII.GetBytes(k);
System.IO.MemoryStream ms = new System.IO.MemoryStream(chipherBytes); //creates a memory stream to store the result.
using (CryptoStream cs = new CryptoStream(ms, desObj.CreateDecryptor(), CryptoStreamMode.Read))
{
cs.Read(chipherBytes, 0, chipherBytes.Length);
plainbytes = ms.ToArray();
cs.Close();
ms.Close();
}
}
catch (Exception e)
{
MessageBox.Show("ln:181" + e.ToString());
}
//Switch used to check the type of data being decrypted, data can be a text string or a path to a file.
switch (dataTypeForEncrypt)
{
case Data_Type.TEXT:
s = Encoding.ASCII.GetString(plainbytes); //Converts the bytes result to a string and returns it as the result.
break;
case Data_Type.FILE:
File.WriteAllBytes(path, plainbytes);
s = getFileNameFromPath(path) + " File decrypted.\n"; //shows to the user that there file has been decrypted.
break;
}
return(s);
}
/// <summary>
/// Update a classifier.
///
/// Update a custom classifier by adding new positive or negative classes or by adding new images to existing
/// classes. You must supply at least one set of positive or negative examples. For details, see [Updating
/// custom
/// classifiers](https://cloud.ibm.com/docs/services/visual-recognition?topic=visual-recognition-customizing#updating-custom-classifiers).
///
/// Encode all names in UTF-8 if they contain non-ASCII characters (.zip and image file names, and classifier
/// and class names). The service assumes UTF-8 encoding if it encounters non-ASCII characters.
///
/// **Tips about retraining:**
///
/// - You can't update the classifier if the **X-Watson-Learning-Opt-Out** header parameter was set to `true`
/// when the classifier was created. Training images are not stored in that case. Instead, create another
/// classifier. For more information, see [Data collection](#data-collection).
///
/// - Don't make retraining calls on a classifier until the status is ready. When you submit retraining requests
/// in parallel, the last request overwrites the previous requests. The `retrained` property shows the last time
/// the classifier retraining finished.
/// </summary>
/// <param name="classifierId">The ID of the classifier.</param>
/// <param name="positiveExamples">A dictionary that contains the value for each classname. The value is a .zip
/// file of images that depict the visual subject of a class in the classifier. The positive examples create or
/// update classes in the classifier. You can include more than one positive example file in a call.
///
/// Specify the parameter name by appending `_positive_examples` to the class name. For example,
/// `goldenretriever_positive_examples` creates the class `goldenretriever`.
///
/// Include at least 10 images in .jpg or .png format. The minimum recommended image resolution is 32X32 pixels.
/// The maximum number of images is 10,000 images or 100 MB per .zip file.
///
/// Encode special characters in the file name in UTF-8. (optional)</param>
/// <param name="negativeExamples">A .zip file of images that do not depict the visual subject of any of the
/// classes of the new classifier. Must contain a minimum of 10 images.
///
/// Encode special characters in the file name in UTF-8. (optional)</param>
/// <param name="negativeExamplesFilename">The filename for negativeExamples. (optional)</param>
/// <returns><see cref="Classifier" />Classifier</returns>
public DetailedResponse <Classifier> UpdateClassifier(string classifierId, Dictionary <string, System.IO.MemoryStream> positiveExamples = null, System.IO.MemoryStream negativeExamples = null, string negativeExamplesFilename = null)
{
if (string.IsNullOrEmpty(classifierId))
{
throw new ArgumentNullException("`classifierId` is required for `UpdateClassifier`");
}
else
{
classifierId = Uri.EscapeDataString(classifierId);
}
if (string.IsNullOrEmpty(VersionDate))
{
throw new ArgumentNullException("versionDate cannot be null.");
}
DetailedResponse <Classifier> result = null;
try
{
var formData = new MultipartFormDataContent();
if (positiveExamples != null && positiveExamples.Count > 0)
{
foreach (KeyValuePair <string, System.IO.MemoryStream> entry in positiveExamples)
{
var partName = string.Format("{0}_positive_examples", entry.Key);
var partContent = new ByteArrayContent(entry.Value.ToArray());
System.Net.Http.Headers.MediaTypeHeaderValue contentType;
System.Net.Http.Headers.MediaTypeHeaderValue.TryParse("application/octet-stream", out contentType);
partContent.Headers.ContentType = contentType;
formData.Add(partContent, partName, entry.Key + ".zip");
}
}
if (negativeExamples != null)
{
var negativeExamplesContent = new ByteArrayContent(negativeExamples.ToArray());
System.Net.Http.Headers.MediaTypeHeaderValue contentType;
System.Net.Http.Headers.MediaTypeHeaderValue.TryParse("application/octet-stream", out contentType);
negativeExamplesContent.Headers.ContentType = contentType;
formData.Add(negativeExamplesContent, "negative_examples", negativeExamplesFilename);
}
IClient client = this.Client;
SetAuthentication();
var restRequest = client.PostAsync($"{this.Endpoint}/v3/classifiers/{classifierId}");
restRequest.WithArgument("version", VersionDate);
restRequest.WithHeader("Accept", "application/json");
restRequest.WithBodyContent(formData);
restRequest.WithHeaders(Common.GetSdkHeaders("watson_vision_combined", "v3", "UpdateClassifier"));
restRequest.WithHeaders(customRequestHeaders);
ClearCustomRequestHeaders();
result = restRequest.As <Classifier>().Result;
if (result == null)
{
result = new DetailedResponse <Classifier>();
}
}
catch (AggregateException ae)
{
throw ae.Flatten();
}
return(result);
}
/// <summary>
/// Classify images.
///
/// Classify images with built-in or custom classifiers.
/// </summary>
/// <param name="imagesFile">An image file (.gif, .jpg, .png, .tif) or .zip file with images. Maximum image size
/// is 10 MB. Include no more than 20 images and limit the .zip file to 100 MB. Encode the image and .zip file
/// names in UTF-8 if they contain non-ASCII characters. The service assumes UTF-8 encoding if it encounters
/// non-ASCII characters.
///
/// You can also include an image with the **url** parameter. (optional)</param>
/// <param name="imagesFilename">The filename for imagesFile. (optional)</param>
/// <param name="imagesFileContentType">The content type of imagesFile. (optional)</param>
/// <param name="url">The URL of an image (.gif, .jpg, .png, .tif) to analyze. The minimum recommended pixel
/// density is 32X32 pixels, but the service tends to perform better with images that are at least 224 x 224
/// pixels. The maximum image size is 10 MB.
///
/// You can also include images with the **images_file** parameter. (optional)</param>
/// <param name="threshold">The minimum score a class must have to be displayed in the response. Set the
/// threshold to `0.0` to return all identified classes. (optional)</param>
/// <param name="owners">The categories of classifiers to apply. The **classifier_ids** parameter overrides
/// **owners**, so make sure that **classifier_ids** is empty.
/// - Use `IBM` to classify against the `default` general classifier. You get the same result if both
/// **classifier_ids** and **owners** parameters are empty.
/// - Use `me` to classify against all your custom classifiers. However, for better performance use
/// **classifier_ids** to specify the specific custom classifiers to apply.
/// - Use both `IBM` and `me` to analyze the image against both classifier categories. (optional)</param>
/// <param name="classifierIds">Which classifiers to apply. Overrides the **owners** parameter. You can specify
/// both custom and built-in classifier IDs. The built-in `default` classifier is used if both
/// **classifier_ids** and **owners** parameters are empty.
///
/// The following built-in classifier IDs require no training:
/// - `default`: Returns classes from thousands of general tags.
/// - `food`: Enhances specificity and accuracy for images of food items.
/// - `explicit`: Evaluates whether the image might be pornographic. (optional)</param>
/// <param name="acceptLanguage">The desired language of parts of the response. See the response for details.
/// (optional, default to en)</param>
/// <returns><see cref="ClassifiedImages" />ClassifiedImages</returns>
public DetailedResponse <ClassifiedImages> Classify(System.IO.MemoryStream imagesFile = null, string imagesFilename = null, string imagesFileContentType = null, string url = null, float?threshold = null, List <string> owners = null, List <string> classifierIds = null, string acceptLanguage = null)
{
if (string.IsNullOrEmpty(VersionDate))
{
throw new ArgumentNullException("versionDate cannot be null.");
}
DetailedResponse <ClassifiedImages> result = null;
try
{
var formData = new MultipartFormDataContent();
if (imagesFile != null)
{
var imagesFileContent = new ByteArrayContent(imagesFile.ToArray());
System.Net.Http.Headers.MediaTypeHeaderValue contentType;
System.Net.Http.Headers.MediaTypeHeaderValue.TryParse(imagesFileContentType, out contentType);
imagesFileContent.Headers.ContentType = contentType;
formData.Add(imagesFileContent, "images_file", imagesFilename);
}
if (url != null)
{
var urlContent = new StringContent(url, Encoding.UTF8, HttpMediaType.TEXT_PLAIN);
urlContent.Headers.ContentType = null;
formData.Add(urlContent, "url");
}
if (threshold != null)
{
var thresholdContent = new StringContent(threshold.ToString(), Encoding.UTF8, HttpMediaType.TEXT_PLAIN);
thresholdContent.Headers.ContentType = null;
formData.Add(thresholdContent, "threshold");
}
if (owners != null)
{
var ownersContent = new StringContent(string.Join(", ", owners.ToArray()), Encoding.UTF8, HttpMediaType.TEXT_PLAIN);
ownersContent.Headers.ContentType = null;
formData.Add(ownersContent, "owners");
}
if (classifierIds != null)
{
var classifierIdsContent = new StringContent(string.Join(", ", classifierIds.ToArray()), Encoding.UTF8, HttpMediaType.TEXT_PLAIN);
classifierIdsContent.Headers.ContentType = null;
formData.Add(classifierIdsContent, "classifier_ids");
}
IClient client = this.Client;
SetAuthentication();
var restRequest = client.PostAsync($"{this.Endpoint}/v3/classify");
restRequest.WithArgument("version", VersionDate);
restRequest.WithHeader("Accept", "application/json");
if (!string.IsNullOrEmpty(acceptLanguage))
{
restRequest.WithHeader("Accept-Language", acceptLanguage);
}
restRequest.WithBodyContent(formData);
restRequest.WithHeaders(Common.GetSdkHeaders("watson_vision_combined", "v3", "Classify"));
restRequest.WithHeaders(customRequestHeaders);
ClearCustomRequestHeaders();
result = restRequest.As <ClassifiedImages>().Result;
if (result == null)
{
result = new DetailedResponse <ClassifiedImages>();
}
}
catch (AggregateException ae)
{
throw ae.Flatten();
}
return(result);
}
public byte[] ImageToByteArray(Image image)
{
System.IO.MemoryStream ms = new System.IO.MemoryStream();
image.Save(ms, System.Drawing.Imaging.ImageFormat.Jpeg);
return(ms.ToArray());
}
/// <summary>
/// Creates the file "etape.xml" and inserts the first step to it.
/// </summary>
/// <param name="expert">The object holding the data.</param>
/// <returns></returns>
private static bool FirstAdd(Etape etape)
{
try
{
XmlWriterSettings wSettings = new XmlWriterSettings();
wSettings.Indent = true;
System.IO.MemoryStream ms = new System.IO.MemoryStream();
XmlWriter xw = XmlWriter.Create(ms, wSettings);// Write Declaration
xw.WriteStartDocument();
// Write the root node
xw.WriteStartElement("Etapes");
xw.WriteStartElement("etape");
xw.WriteStartAttribute("id");
xw.WriteString("0");
xw.WriteEndAttribute();
//----------------
xw.WriteStartElement("libelle");
xw.WriteString(etape.getName());
xw.WriteEndElement();
//-----------------
xw.WriteStartElement("description");
xw.WriteString(etape.getDescription());
xw.WriteEndElement();
//-----------------
xw.WriteStartElement("objets");
//System.Windows.Forms.MessageBox.Show("Step.Objects.Count: " + etape.getObjectList().Count, "XMLStep.FirstAdd");
for (int i = 0; i < etape.getObjectList().Count; i++)
{
Object3d obj = etape.getObjectList()[i];
xw.WriteStartElement("objet");//<objet>
xw.WriteStartAttribute("id");
xw.WriteString(obj.getId().ToString());
xw.WriteEndAttribute();
xw.WriteStartAttribute("nb");
xw.WriteString(i.ToString());
xw.WriteEndAttribute();
xw.WriteStartElement("position");//<position>
//Transform axis
float X, Y, Z;
X = obj.getPosition().X;
Y = obj.getPosition().Y;
Z = obj.getPosition().Z;
Helper.TransformAxis(ref X, ref Y, ref Z, Transformation.Translation, true);
xw.WriteStartAttribute("x");
xw.WriteString((X / translateFactor).ToString());
xw.WriteEndAttribute();
xw.WriteStartAttribute("y");
xw.WriteString((Y / translateFactor).ToString());
xw.WriteEndAttribute();
xw.WriteStartAttribute("z");
xw.WriteString((zFactor * Z / translateFactor).ToString());
xw.WriteEndAttribute();
xw.WriteEndElement(); //</position>
xw.WriteStartElement("rotation"); //<rotation>
//Transform axis
X = obj.getRotation().X;
Y = obj.getRotation().Y;
Z = obj.getRotation().Z;
Helper.TransformAxis(ref X, ref Y, ref Z, Transformation.Rotation, true);
float angleRad = Helper.DegreesToRadians(Constante.stableAngle);
Vector3 v = Vector3.Multiply(obj.getRotation(), 1 / angleRad);
Vector3 N = Helper.Normalize(v);
//System.Windows.Forms.MessageBox.Show("obj/angle: " + v.ToString() + "\nNorm: " + v1.ToString());
angleRad = angleRad / (N.X / v.X);
//angle = Helper.RadiansToDegrees(angleRad);
angle = Constante.stableAngle;
xw.WriteStartAttribute("angle");
if (obj.getRotation().X + obj.getRotation().Y + obj.getRotation().Z == 0)
{
xw.WriteString((0).ToString());
}
else
{
xw.WriteString((angle).ToString());
}
xw.WriteEndAttribute();
xw.WriteStartAttribute("x");
xw.WriteString((Helper.RadiansToDegrees(X) / angle).ToString());
xw.WriteEndAttribute();
xw.WriteStartAttribute("y");
xw.WriteString((Helper.RadiansToDegrees(Y) / angle).ToString());
xw.WriteEndAttribute();
xw.WriteStartAttribute("z");
xw.WriteString((Helper.RadiansToDegrees(Z) / angle).ToString());
xw.WriteEndAttribute();
xw.WriteEndElement(); //</rotation>
xw.WriteStartElement("scale"); //<scale>
xw.WriteStartAttribute("x");
xw.WriteString((obj.getScale().X *scaleFactor).ToString());
xw.WriteEndAttribute();
xw.WriteStartAttribute("y");
xw.WriteString((obj.getScale().Y *scaleFactor).ToString());
xw.WriteEndAttribute();
xw.WriteStartAttribute("z");
xw.WriteString((obj.getScale().Z *scaleFactor).ToString());
xw.WriteEndAttribute();
xw.WriteEndElement(); //</scale>
xw.WriteEndElement(); //</objet>
}
xw.WriteEndElement();
xw.WriteStartElement("procedure");
xw.WriteString(etape.getprocedure().getId().ToString());
xw.WriteEndElement();
//-----------------
xw.WriteEndElement();
xw.WriteStartElement("MaxID");
xw.WriteString("0");
xw.WriteEndElement();
// Close the document
xw.WriteEndDocument();
// Flush the write
xw.Flush();
Byte[] buffer = new Byte[ms.Length];
buffer = ms.ToArray();
string xmlOutput = System.Text.Encoding.UTF8.GetString(buffer);
//File.WriteAllText((Stream)Helper.service.LoadFile("etape.xml", xmlOutput);
Helper.service.CreateXmlFile("etape.xml", xmlOutput);
}
catch (System.IO.FileNotFoundException x) { }
catch (Exception x) { System.Windows.Forms.MessageBox.Show(x.ToString()); }
return(true);
}
public FileResult Export()
{
using (MemoryStream stream = new System.IO.MemoryStream())
{
var listaprod = SessionHelper.GetObjectFromJson <List <Producto> >(HttpContext.Session, "ProductList");
//Initialize the PDF document object.
using (Document pdfDoc = new Document(PageSize.A4, 10f, 10f, 10f, 10f))
{
PdfWriter writer = PdfWriter.GetInstance(pdfDoc, stream);
pdfDoc.Open();
//Add the Image file to the PDF document object.
iTextSharp.text.Font _standardFont = new iTextSharp.text.Font(iTextSharp.text.Font.FontFamily.HELVETICA, 8, iTextSharp.text.Font.NORMAL, BaseColor.BLACK);
// Escribimos el encabezamiento en el documento
pdfDoc.Add(new Paragraph("Lista de Productos"));
pdfDoc.Add(Chunk.NEWLINE);
// Creamos una tabla que contendrá el nombre, apellido y país
// de nuestros visitante.
PdfPTable tblPrueba = new PdfPTable(7);
tblPrueba.WidthPercentage = 100;
// Configuramos el título de las columnas de la tabla
PdfPCell clId = new PdfPCell(new Phrase("Id", _standardFont));
clId.BorderWidth = 0;
clId.BorderWidthBottom = 0.75f;
clId.BackgroundColor = BaseColor.CYAN;
clId.Border = 1;
clId.HorizontalAlignment = 1;
PdfPCell clMarca = new PdfPCell(new Phrase("Marca", _standardFont));
clMarca.BorderWidth = 0;
clMarca.BorderWidthBottom = 0.75f;
clMarca.BackgroundColor = BaseColor.CYAN;
clMarca.Border = 1;
clMarca.HorizontalAlignment = 1;
PdfPCell clCantidad = new PdfPCell(new Phrase("Cantidad", _standardFont));
clCantidad.BorderWidth = 0;
clCantidad.BorderWidthBottom = 0.75f;
clCantidad.BackgroundColor = BaseColor.CYAN;
clCantidad.Border = 1;
clCantidad.HorizontalAlignment = 1;
PdfPCell clMedida = new PdfPCell(new Phrase("Medida", _standardFont));
clMedida.BorderWidth = 0;
clMedida.BorderWidthBottom = 0.75f;
clMedida.BackgroundColor = BaseColor.CYAN;
clMedida.Border = 1;
clMedida.HorizontalAlignment = 1;
PdfPCell clUnitario = new PdfPCell(new Phrase("Unitario", _standardFont));
clUnitario.BorderWidth = 0;
clUnitario.BorderWidthBottom = 0.75f;
clUnitario.BackgroundColor = BaseColor.CYAN;
clUnitario.Border = 1;
clUnitario.HorizontalAlignment = 1;
PdfPCell clBulto = new PdfPCell(new Phrase("Bulto", _standardFont));
clBulto.BorderWidth = 0;
clBulto.BorderWidthBottom = 0.75f;
clBulto.BackgroundColor = BaseColor.CYAN;
clBulto.Border = 0;
clBulto.HorizontalAlignment = 1;
PdfPCell clEtiqueta = new PdfPCell(new Phrase("Etiqueta", _standardFont));
clEtiqueta.BorderWidth = 0;
clEtiqueta.BorderWidthBottom = 0.75f;
clEtiqueta.BackgroundColor = BaseColor.CYAN;
clEtiqueta.Border = 0;
clEtiqueta.HorizontalAlignment = 1;
// Añadimos las celdas a la tabla
tblPrueba.AddCell(clId);
tblPrueba.AddCell(clMarca);
tblPrueba.AddCell(clCantidad);
tblPrueba.AddCell(clMedida);
tblPrueba.AddCell(clUnitario);
tblPrueba.AddCell(clBulto);
tblPrueba.AddCell(clEtiqueta);
// var listaprod = ViewBag.ProductosDB;
foreach (var item in listaprod)
{
// Llenamos la tabla con información
clId = new PdfPCell(new Phrase(item.ProdId.ToString(), _standardFont));
clId.HorizontalAlignment = 1;
clMarca = new PdfPCell(new Phrase(item.ProdMarca, _standardFont));
clMarca.HorizontalAlignment = 1;
clCantidad = new PdfPCell(new Phrase(item.ProdCantidad.ToString(), _standardFont));
clCantidad.HorizontalAlignment = 1;
clMedida = new PdfPCell(new Phrase(item.ProdMedida.ToString(), _standardFont));
clMedida.HorizontalAlignment = 1;
clUnitario = new PdfPCell(new Phrase(item.ProdUnitario.ToString(), _standardFont));
clUnitario.HorizontalAlignment = 1;
clBulto = new PdfPCell(new Phrase(item.PrdoBulto.ToString(), _standardFont));
clBulto.HorizontalAlignment = 1;
clEtiqueta = new PdfPCell(new Phrase(item.ProdEtiqueta.ToString(), _standardFont));
clEtiqueta.HorizontalAlignment = 1;
// Añadimos las celdas a la tabla
tblPrueba.AddCell(clId);
tblPrueba.AddCell(clMarca);
tblPrueba.AddCell(clCantidad);
tblPrueba.AddCell(clMedida);
tblPrueba.AddCell(clUnitario);
tblPrueba.AddCell(clBulto);
tblPrueba.AddCell(clEtiqueta);
}
pdfDoc.Add(tblPrueba);
pdfDoc.Close();
writer.Close();
//Download the PDF file.
return(File(stream.ToArray(), "application/pdf", "PdfExportList.pdf"));
}
}
}
/// <summary>
/// Translate document.
///
/// Submit a document for translation. You can submit the document contents in the `file` parameter, or you can
/// reference a previously submitted document by document ID.
/// </summary>
/// <param name="file">The source file to translate.
///
/// [Supported file
/// types](https://cloud.ibm.com/docs/services/language-translator?topic=language-translator-document-translator-tutorial#supported-file-formats)
///
/// Maximum file size: **20 MB**.</param>
/// <param name="filename">The filename for file.</param>
/// <param name="fileContentType">The content type of file. (optional)</param>
/// <param name="modelId">The model to use for translation. `model_id` or both `source` and `target` are
/// required. (optional)</param>
/// <param name="source">Language code that specifies the language of the source document. (optional)</param>
/// <param name="target">Language code that specifies the target language for translation. (optional)</param>
/// <param name="documentId">To use a previously submitted document as the source for a new translation, enter
/// the `document_id` of the document. (optional)</param>
/// <returns><see cref="DocumentStatus" />DocumentStatus</returns>
public DetailedResponse <DocumentStatus> TranslateDocument(System.IO.MemoryStream file, string filename, string fileContentType = null, string modelId = null, string source = null, string target = null, string documentId = null)
{
if (file == null)
{
throw new ArgumentNullException("`file` is required for `TranslateDocument`");
}
if (string.IsNullOrEmpty(filename))
{
throw new ArgumentNullException("`filename` is required for `TranslateDocument`");
}
if (string.IsNullOrEmpty(VersionDate))
{
throw new ArgumentNullException("versionDate cannot be null.");
}
DetailedResponse <DocumentStatus> result = null;
try
{
var formData = new MultipartFormDataContent();
if (file != null)
{
var fileContent = new ByteArrayContent(file.ToArray());
System.Net.Http.Headers.MediaTypeHeaderValue contentType;
System.Net.Http.Headers.MediaTypeHeaderValue.TryParse(fileContentType, out contentType);
fileContent.Headers.ContentType = contentType;
formData.Add(fileContent, "file", filename);
}
if (modelId != null)
{
var modelIdContent = new StringContent(modelId, Encoding.UTF8, HttpMediaType.TEXT_PLAIN);
modelIdContent.Headers.ContentType = null;
formData.Add(modelIdContent, "model_id");
}
if (source != null)
{
var sourceContent = new StringContent(source, Encoding.UTF8, HttpMediaType.TEXT_PLAIN);
sourceContent.Headers.ContentType = null;
formData.Add(sourceContent, "source");
}
if (target != null)
{
var targetContent = new StringContent(target, Encoding.UTF8, HttpMediaType.TEXT_PLAIN);
targetContent.Headers.ContentType = null;
formData.Add(targetContent, "target");
}
if (documentId != null)
{
var documentIdContent = new StringContent(documentId, Encoding.UTF8, HttpMediaType.TEXT_PLAIN);
documentIdContent.Headers.ContentType = null;
formData.Add(documentIdContent, "document_id");
}
IClient client = this.Client;
SetAuthentication();
var restRequest = client.PostAsync($"{this.Endpoint}/v3/documents");
restRequest.WithArgument("version", VersionDate);
restRequest.WithHeader("Accept", "application/json");
restRequest.WithBodyContent(formData);
restRequest.WithHeaders(Common.GetSdkHeaders("language_translator", "v3", "TranslateDocument"));
restRequest.WithHeaders(customRequestHeaders);
ClearCustomRequestHeaders();
result = restRequest.As <DocumentStatus>().Result;
if (result == null)
{
result = new DetailedResponse <DocumentStatus>();
}
}
catch (AggregateException ae)
{
throw ae.Flatten();
}
return(result);
}
protected void SetandoRel(string formato = null)
{
//Report da stimulsoft
Stimulsoft.Report.StiReport Report = new Stimulsoft.Report.StiReport();
//Stimulsoft.Report.Web.web.StiWebDesigner st1 = new Stimulsoft.Report.Web.StiWebDesigner();
//Stimulsoft.Report.Web.StiWebDesigner st1 = new Stimulsoft.Report.Web.StiWebDesigner();
//Stimulsoft.Report.Web.StiWebDesigner st1 = new Stimulsoft.Report.Web.StiWebDesigner();
if (Convert.ToString(Request.QueryString["Rel"]) == "frmZurel")
{
Report.Load(Server.MapPath(@"~/Relatorio/STF/folhafrequencia.mrt"));
Report.Compile();
Report["DiasMes"] = TotalDiasMes.ToString();
Report["DiasCumpridos"] = TotalDiasCumprido.ToString();
Report["TotalHorasMes"] = TotalHoraMes.ToString();
Report["HorasCumpridas"] = HorasCumpridas;
Report["HorasRealizadas"] = HorasRealizadas;
}
else if (Convert.ToString(Request.QueryString["Rel"]) == "frmZuxa")
{
Report.Load(Server.MapPath(@"~/Relatorio/STF/EspelhoPonto.mrt"));
Report.Compile();
Report["DiasMes"] = TotalDiasMes.ToString();
Report["DiasCumpridos"] = TotalDiasCumprido.ToString();
Report["TotalHorasMes"] = TotalHoraMes.ToString();
Report["HorasCumpridas"] = HorasCumpridas.ToString();
}
else if (Convert.ToString(Request.QueryString["Rel"]) == "frmsitu")
{
Report.Load(Server.MapPath(@"~/Relatorio/STF/situacaousuario.mrt"));
}
else if (Convert.ToString(Request.QueryString["Rel"]) == "frmbco")
{
Report.Load(Server.MapPath(@"~/Relatorio/STF/totalhorasdiarias.mrt"));
Report.Compile();
//Report["Teste"] = 932;
}
else if (Convert.ToString(Request.QueryString["Rel"]) == "frmbcoHoraMes")
{
Report.Load(Server.MapPath(@"~/Relatorio/STF/bancoHoraMes.mrt"));
}
else if (Convert.ToString(Request.QueryString["Rel"]) == "frmRelacDia")
{
Report.Load(Server.MapPath(@"~/Relatorio/STF/relacaopontoDia.mrt"));
Report.Compile();
Report["DTInicio"] = INICIO;
Report["DTFim"] = FIM;
}
else if (Convert.ToString(Request.QueryString["Rel"]) == "frmLocalRegistro")
{
Report.Load(Server.MapPath(@"~/Relatorio/STF/LocalRegistro.mrt"));
Report.Compile();
Report["DTInicio"] = INICIO;
Report["DTFim"] = FIM;
}
else if (Convert.ToString(Request.QueryString["Rel"]) == "frmMotivoFalta")
{
Report.Load(Server.MapPath(@"~/Relatorio/STF/RelacaoMotivoFalta.mrt"));
Report.Compile();
Report["DTInicio"] = INICIO;
Report["DTFim"] = FIM;
}
else if (Convert.ToString(Request.QueryString["Rel"]) == "frmfca")
{
Report.Load(Server.MapPath(@"~/Relatorio/STF/FichaCadastral.mrt"));
Report.Compile();
}
else if (Convert.ToString(Request.QueryString["Rel"]) == "frmfi")
{
Report.Load(Server.MapPath(@"~/Relatorio/STF/FichaCadastral.mrt"));
Report.Compile();
}
else if (Convert.ToString(Request.QueryString["Rel"]) == "frmdesc")
{
Report.Load(Server.MapPath(@"~/Relatorio/STF/RelRelacaoRegistroPeriodo.mrt"));
Report.Compile();
Report["DTInicio"] = INICIO;
Report["DTFim"] = FIM;
}
else if (Convert.ToString(Request.QueryString["Rel"]) == "frmfaltaInjust")
{
if (RelUtilizado == 0)
{
Report.Load(Server.MapPath(@"~/Relatorio/STF/RelDataInjustificada.mrt"));
}
else
{
Report.Load(Server.MapPath(@"~/Relatorio/STF/RelRegistroAusente.mrt"));
}
//o Outro Aqui
Report.Compile();
Report["DTInicio"] = INICIO;
Report["DTFim"] = FIM;
}
else if (Convert.ToString(Request.QueryString["Rel"]) == "frmAuditRel")
{
Report.Load(Server.MapPath(@"~/Relatorio/STF/RelatorioAuditoriaJustificativa.mrt"));
Report.Compile();
Report["DTInicio"] = INICIO;
Report["DTFim"] = FIM;
}
Report.RegData("DatasetPontoFrequencia", ds);
Report.Render();
System.IO.MemoryStream memStream = new System.IO.MemoryStream();
HttpContext.Current.Response.ClearContent();
HttpContext.Current.Response.ClearHeaders();
HttpContext.Current.Response.ContentType = "application/pdf";
HttpContext.Current.Response.AddHeader("Pontoweb.pdf", "");
Stimulsoft.Report.Export.StiPdfExportService Export = new Stimulsoft.Report.Export.StiPdfExportService();
Export.ExportPdf(Report, memStream, Stimulsoft.Report.StiPagesRange.All, 100, 100, false, false, true, true,
"", "", Stimulsoft.Report.Export.StiUserAccessPrivileges.All, Stimulsoft.Report.Export.StiPdfEncryptionKeyLength.Bit40, false);
Response.ContentType = "application/pdf";
Response.AddHeader("content-disposition", "inline; filename=Pontoweb.pdf");
Response.BinaryWrite(memStream.ToArray());
}
private void btnPDF_CiktiAl_Click(object sender, EventArgs e)
{
if (dgvOdaDemirbaslari.RowCount > 0)
{
using (SaveFileDialog sfd = new SaveFileDialog()
{
Filter = "PDF file|*.pdf", ValidateNames = true
})
{
if (sfd.ShowDialog() == DialogResult.OK)
{
iTextSharp.text.Document doc = new iTextSharp.text.Document(PageSize.A4);
try
{
System.IO.MemoryStream ms = new System.IO.MemoryStream();
PdfWriter.GetInstance(doc, new FileStream(sfd.FileName, FileMode.Create));
iTextSharp.text.pdf.PdfWriter writer = iTextSharp.text.pdf.PdfWriter.GetInstance(doc, ms);
doc.Open();
BaseFont text = BaseFont.CreateFont("Helvetica", "Cp1254", iTextSharp.text.pdf.BaseFont.NOT_EMBEDDED);
iTextSharp.text.Font f = new iTextSharp.text.Font(text, 16f, 1, BaseColor.RED);
Chunk c = new Chunk();
c.Font = f;
doc.Add(c);
Paragraph heading = new Paragraph("FLAMİNGO STOK TAKİP SİSTEMİ \n\n\n", f);
heading.Alignment = Element.ALIGN_CENTER;
doc.Add(heading);
BaseFont text1 = BaseFont.CreateFont("Helvetica", "Cp1254", iTextSharp.text.pdf.BaseFont.NOT_EMBEDDED);
iTextSharp.text.Font f1 = new iTextSharp.text.Font(text1, 12f, 0, BaseColor.BLACK);
Chunk c1 = new Chunk();
c1.Font = f1;
doc.Add(c1);
Paragraph p1 = new Paragraph(pdfBilgiGoster, f1);
doc.Add(p1);
Paragraph p2 = new Paragraph(" ");
doc.Add(p2);
BaseFont text2 = BaseFont.CreateFont("Helvetica", "Cp1254", iTextSharp.text.pdf.BaseFont.NOT_EMBEDDED);
iTextSharp.text.Font f2 = new iTextSharp.text.Font(text2, 10f, 1, BaseColor.BLACK);
Chunk c2 = new Chunk();
c2.Font = f2;
doc.Add(c2);
PdfPTable table = new PdfPTable(dgvOdaDemirbaslari.Columns.Count);
for (int j = 0; j < dgvOdaDemirbaslari.Columns.Count; j++)
{
table.AddCell(new Phrase(dgvOdaDemirbaslari.Columns[j].HeaderText, f2));
}
table.HeaderRows = 1;
BaseFont text3 = BaseFont.CreateFont("Helvetica", "Cp1254", iTextSharp.text.pdf.BaseFont.NOT_EMBEDDED);
iTextSharp.text.Font f3 = new iTextSharp.text.Font(text3, 10f, 0, BaseColor.BLACK);
Chunk c3 = new Chunk();
c3.Font = f3;
doc.Add(c3);
for (int i = 0; i < dgvOdaDemirbaslari.Rows.Count; i++)
{
for (int k = 0; k < dgvOdaDemirbaslari.Columns.Count; k++)
{
if (dgvOdaDemirbaslari[k, i].Value != null)
{
table.AddCell(new Phrase(dgvOdaDemirbaslari[k, i].Value.ToString(), f3));
}
}
}
doc.Add(table);
byte[] belge = ms.ToArray();
string[] belgeAdi = sfd.FileName.Split('\\');
string gercekBelgeAdi = belgeAdi[belgeAdi.Length - 1];
belgeAdi = gercekBelgeAdi.Split('.');
gercekBelgeAdi = belgeAdi[0];
tblBelgeler Belge = new tblBelgeler();
Belge.BelgeAdi = gercekBelgeAdi;
Belge.BelgeOlusturulmaTarihi = DateTime.Now.Date;
Belge.KullaniciID = FormGirisYap.kullaniciID;
Belge.BelgeYolu = sfd.FileName;
Entities.tblBelgeler.Add(Belge);
Entities.SaveChanges();
}
catch (Exception ex)
{
MessageBox.Show(ex.Message, "Mesaj", MessageBoxButtons.OK, MessageBoxIcon.Error);
}
finally
{
doc.Close();
}
}
}
}
else
{
MessageBox.Show("PDF dökümanı oluşturmak için listeleme yapınız!", "Oda Arama", MessageBoxButtons.OK, MessageBoxIcon.Warning);
}
}
public void DownloadPDFFormat()
{
log4net.ILog logger = log4net.LogManager.GetLogger("File");
try
{
Document pdfReport = new Document(PageSize.A4, 25, 25, 40, 25);
System.IO.MemoryStream msReport = new System.IO.MemoryStream();
PdfWriter writer = PdfWriter.GetInstance(pdfReport, msReport);
pdfReport.Open();
string datetime = string.Empty;
datetime = Convert.ToString(System.DateTime.Now);
string str = string.Empty;
if (ddllocation.Text != "")
{
str = (" Location : " + ddllocation.Text);
}
//Create Heading
Phrase headerPhrase = new Phrase("Monthly Roster Report ", FontFactory.GetFont("Garamond", 14));
headerPhrase.Add(" Generated On : ");
headerPhrase.Add(datetime);
headerPhrase.Add(" Searching Parameter : ");
headerPhrase.Add(str);
//Create Heading
// Phrase headerPhrase = new Phrase("Contractor Report", FontFactory.GetFont("TIMES_ROMAN", 16));
HeaderFooter header = new HeaderFooter(headerPhrase, false);
header.Border = Rectangle.NO_BORDER;
header.Alignment = Element.ALIGN_CENTER;
header.Alignment = Element.ALIGN_BOTTOM;
pdfReport.Header = header;
pdfReport.Add(headerPhrase);
// Creates the Table
PdfPTable ptData = new PdfPTable(gvItemTable.Columns.Count);
ptData.SpacingBefore = 8;
ptData.DefaultCell.Padding = 1;
float[] headerwidths = new float[gvItemTable.Columns.Count]; // percentage
headerwidths[0] = 4.2F;
headerwidths[1] = 4.2F;
headerwidths[2] = 4.2F;
headerwidths[3] = 4.2F;
//headerwidths[4] = 4.2F;
//headerwidths[5] = 4.2F;
//headerwidths[6] = 4.2F;
//headerwidths[7] = 4.2F;
////headerwidths[8] = 3.2F;
////headerwidths[9] = 3.2F;
ptData.SetWidths(headerwidths);
ptData.WidthPercentage = 100;
ptData.DefaultCell.HorizontalAlignment = Element.ALIGN_JUSTIFIED;
ptData.DefaultCell.VerticalAlignment = Element.ALIGN_MIDDLE;
//Insert the Table Headers
for (int intK = 0; intK < gvItemTable.Columns.Count; intK++)
{
PdfPCell cell = new PdfPCell();
cell.BorderWidth = 0.001f;
cell.BackgroundColor = new Color(200, 200, 200);
cell.BorderColor = new Color(100, 100, 100);
cell.Phrase = new Phrase(gvItemTable.Columns[intK].HeaderText.ToString(), FontFactory.GetFont("TIMES_ROMAN", BaseFont.WINANSI, 7, Font.BOLD));
ptData.AddCell(cell);
}
ptData.HeaderRows = 1; // this is the end of the table header
//Insert the Table Data
for (int intJ = 0; intJ < gvItemTable.Rows.Count; intJ++)
{
for (int intK = 0; intK < gvItemTable.Columns.Count; intK++)
{
PdfPCell cell = new PdfPCell();
cell.BorderWidth = 0.001f;
cell.BorderColor = new Color(100, 100, 100);
cell.BackgroundColor = new Color(250, 250, 250);
if (gvItemTable.Rows[intJ].Cells[intK].Text.ToString() != " ")
{
cell.Phrase = new Phrase(gvItemTable.Rows[intJ].Cells[intK].Text.ToString(), FontFactory.GetFont("TIMES_ROMAN", BaseFont.WINANSI, 6));
}
else
{
cell.Phrase = new Phrase("", FontFactory.GetFont("TIMES_ROMAN", BaseFont.WINANSI, 6));
}
ptData.AddCell(cell);
}
}
//Insert the Table
pdfReport.Add(ptData);
//Closes the Report and writes to Memory Stream
pdfReport.Close();
//Writes the Memory Stream Data to Response Object
Response.Clear();
// Response.AddHeader("content-disposition", string.Format("attachment;filename=" + ConfigurationManager.AppSettings["TxnInfoPdfFile"]));
Response.AddHeader("content-disposition", string.Format("attachment;filename=testpfd.pdf"));
Response.Charset = "";
Response.ContentType = "application/pdf";
Response.BinaryWrite(msReport.ToArray());
Response.End();
}
catch (Exception ex)
{
logger.Info(ex.Message);
}
}
private FastString GetHtmlParagraph(HtmlTextRenderer renderer)
{
FastString sb = new FastString();
foreach (HtmlTextRenderer.Paragraph paragraph in renderer.Paragraphs)
{
foreach (HtmlTextRenderer.Line line in paragraph.Lines)
{
if (sb == null)
{
sb = new FastString();
}
sb.Append("<span style=\"");
sb.Append("display:block;");
if (line.Top + line.Height > renderer.DisplayRect.Bottom)
{
sb.Append("height:").Append(Math.Max(renderer.DisplayRect.Bottom - line.Top, 0).ToString(HtmlTextRenderer.CultureInfo)).Append("px;");
}
else
{
//sb.Append("height:").Append(line.Height.ToString(HtmlTextRenderer.CultureInfo)).Append("px;");
if (line.LineSpacing > 0)
{
sb.Append("margin-bottom:").Append(line.LineSpacing.ToString(HtmlTextRenderer.CultureInfo)).Append("px;");
}
}
sb.Append("overflow:hidden;");
sb.Append("line-height:").Append(line.Height.ToString(HtmlTextRenderer.CultureInfo)).Append("px;");
if (line.HorzAlign == HorzAlign.Justify)
{
sb.Append("text-align-last:justify;");
}
else
{
sb.Append("white-space:pre;");
}
sb.Append("\">");
HtmlTextRenderer.StyleDescriptor styleDesc = null;
foreach (HtmlTextRenderer.Word word in line.Words)
{
foreach (HtmlTextRenderer.Run run in word.Runs)
{
if (!run.Style.FullEquals(styleDesc))
{
if (styleDesc != null)
{
styleDesc.ToHtml(sb, true);
}
styleDesc = run.Style;
styleDesc.ToHtml(sb, false);
}
if (run is HtmlTextRenderer.RunText)
{
HtmlTextRenderer.RunText runText = run as HtmlTextRenderer.RunText;
foreach (char ch in runText.Text)
{
switch (ch)
{
case '"':
sb.Append(""");
break;
case '&':
sb.Append("&");
break;
case '<':
sb.Append("<");
break;
case '>':
sb.Append(">");
break;
case '\t':
sb.Append("	");
break;
default:
sb.Append(ch);
break;
}
}
}
else if (run is HtmlTextRenderer.RunImage)
{
HtmlTextRenderer.RunImage runImage = run as HtmlTextRenderer.RunImage;
using (System.IO.MemoryStream ms = new System.IO.MemoryStream())
{
try
{
float w, h;
using (Bitmap bmp = runImage.GetBitmap(out w, out h))
{
bmp.Save(ms, System.Drawing.Imaging.ImageFormat.Png);
}
ms.Flush();
sb.Append("<img src=\"data:image/png;base64,").Append(Convert.ToBase64String(ms.ToArray()))
.Append("\" width=\"").Append(w.ToString(HtmlTextRenderer.CultureInfo)).Append("\" height=\"").Append(h.ToString(HtmlTextRenderer.CultureInfo)).Append("\"/>");
}
catch (Exception /*e*/)
{
}
}
}
//run.ToHtml(sb, true);
}
}
if (styleDesc != null)
{
styleDesc.ToHtml(sb, true);
}
else
{
sb.Append("<br/>");
}
sb.Append("</span>");
}
}
return(sb);
}
public static byte[] GenerateExcel(this IEnumerable <Car> cars, string password, string imagePath)
{
int count = 0;
int line = 2;
int col = 0;
FileInfo fileInfo = new FileInfo(@"C:\Excel.xlsx");
ExcelPackage xlPackage = new ExcelPackage(fileInfo);
xlPackage.Workbook.Protection.SetPassword(password);
var sheet = xlPackage.Workbook.Worksheets[DateTime.Now.ToString("yyyyMMdd")];
if (sheet == null)
{
sheet = xlPackage.Workbook.Worksheets.Add(DateTime.Now.ToString("yyyyMMdd"));
}
Bitmap bitmap = new Bitmap(imagePath);
if (bitmap != null)
{
int Height = 100;
int Width = 50;
ExcelPicture pic = sheet.Drawings.AddPicture("Sample", bitmap);
pic.SetPosition(0, 0, 0, 0);
pic.SetSize(Height, Width);
}
var cells = sheet.Cells;
//title
cells[4, 1].Value = "Cars";
#region WriteToExcel
line = 6;
foreach (Car car in cars)
{
count = 0;
col = 0;
cells[line, ++col].Value = car.Brand;
cells[line, ++col].Value = car.Model;
cells[line, ++col].Value = car.VIN;
cells[line, ++col].Value = car.Showroom?.Name;
line++;
}
#endregion
#region WriteHeaderToExcel
count = 1;
cells[5, count++].Value = "Brand";
cells[5, count++].Value = "Name";
cells[5, count++].Value = "VIN";
cells[5, count++].Value = "Showroom";
#endregion
//style
using (var range = cells[1, 1, 5, count])
{
range.Style.Font.Bold = true;
}
xlPackage.Encryption.Password = password; //set password for Excel File
System.IO.MemoryStream output = new System.IO.MemoryStream(xlPackage.GetAsByteArray());
return(output.ToArray());
}
public static object ExportToExcel(string model, string data, string title)
{
using (System.IO.MemoryStream stream = new System.IO.MemoryStream())
{
/* Create the worksheet. */
SpreadsheetDocument spreadsheet = Excel.CreateWorkbook(stream);
Excel.AddBasicStyles(spreadsheet);
Excel.AddAdditionalStyles(spreadsheet);
Excel.AddWorksheet(spreadsheet, title);
Worksheet worksheet = spreadsheet.WorkbookPart.WorksheetParts.First().Worksheet;
/* Get the information needed for the worksheet */
var modelObject = JsonConvert.DeserializeObject <dynamic>(model);
var dataObject = JsonConvert.DeserializeObject <dynamic>(data);
/* Add the column titles to the worksheet. */
// For each column...
for (int mdx = 0; mdx < modelObject.Count; mdx++)
{
// If the column has a title, use it. Otherwise, use the field name.
Excel.SetColumnHeadingValue(spreadsheet, worksheet, Convert.ToUInt32(mdx + 1),
(modelObject[mdx].title == null || modelObject[mdx].title == " ")
? modelObject[mdx].field.ToString()
: modelObject[mdx].title.ToString(),
false, false);
// Is there are column width defined?
Excel.SetColumnWidth(worksheet, mdx + 1, modelObject[mdx].width != null
? int.Parse(LeadingInteger.Match(modelObject[mdx].width.ToString()).Value) / 4
: 25);
}
/* Add the data to the worksheet. */
// For each row of data...
for (int idx = 0; idx < dataObject.Count; idx++)
{
// For each column...
for (int mdx = 0; mdx < modelObject.Count; mdx++)
{
// Set the field value in the spreadsheet for the current row and column.
Excel.SetCellValue(spreadsheet, worksheet, Convert.ToUInt32(mdx + 1), Convert.ToUInt32(idx + 2),
dataObject[idx][modelObject[mdx].field.ToString()].ToString(),
false, false);
}
}
/* Save the worksheet and store it in Session using the spreadsheet title. */
worksheet.Save();
spreadsheet.Close();
byte[] file = stream.ToArray();
HttpContext.Current.Session[title] = file;
}
return(new { success = true });
}
/// <summary>
/// Use this method to write XMP data to a new PDF
/// </summary>
/// <param name="writer"></param>
protected void CreateXmpMetadata(iTextSharp.text.pdf.PdfWriter writer, string title, List <string> subjects = null)
{
if (subjects == null)
{
subjects = new List <string>();
}
// Set up the buffer to hold the XMP metadata
byte[] buffer = new byte[65536];
System.IO.MemoryStream ms = new System.IO.MemoryStream(buffer, true);
try
{
// XMP supports a number of different schemas, which are made available by iTextSharp.
// Here, the Dublin Core schema is chosen.
iTextSharp.text.xml.xmp.XmpSchema dc = new iTextSharp.text.xml.xmp.DublinCoreSchema();
// Add Dublin Core attributes
iTextSharp.text.xml.xmp.LangAlt ttl = new iTextSharp.text.xml.xmp.LangAlt();
ttl.Add("x-default", title);
dc.SetProperty(iTextSharp.text.xml.xmp.DublinCoreSchema.TITLE, ttl);
// Dublin Core allows multiple authors, so we create an XmpArray to hold the values
iTextSharp.text.xml.xmp.XmpArray author = new iTextSharp.text.xml.xmp.XmpArray(iTextSharp.text.xml.xmp.XmpArray.ORDERED);
author.Add("Lietuva 2.0");
dc.SetProperty(iTextSharp.text.xml.xmp.DublinCoreSchema.CREATOR, author);
// Multiple subjects are also possible, so another XmpArray is used
iTextSharp.text.xml.xmp.XmpArray subject = new iTextSharp.text.xml.xmp.XmpArray(iTextSharp.text.xml.xmp.XmpArray.UNORDERED);
foreach (var sbj in subjects)
{
subject.Add(sbj);
}
dc.SetProperty(iTextSharp.text.xml.xmp.DublinCoreSchema.SUBJECT, subject);
// Create an XmpWriter using the MemoryStream defined earlier
iTextSharp.text.xml.xmp.XmpWriter xmp = new iTextSharp.text.xml.xmp.XmpWriter(ms);
xmp.AddRdfDescription(dc); // Add the completed metadata definition to the XmpWriter
xmp.Close(); // This flushes the XMP metadata into the buffer
//---------------------------------------------------------------------------------
// Shrink the buffer to the correct size (discard empty elements of the byte array)
int bufsize = buffer.Length;
int bufcount = 0;
foreach (byte b in buffer)
{
if (b == 0)
{
break;
}
bufcount++;
}
System.IO.MemoryStream ms2 = new System.IO.MemoryStream(buffer, 0, bufcount);
buffer = ms2.ToArray();
//---------------------------------------------------------------------------------
// Add all of the XMP metadata to the PDF doc that we're building
writer.XmpMetadata = buffer;
}
catch (Exception ex)
{
throw ex;
}
finally
{
ms.Close();
ms.Dispose();
}
}
private void CreateCheckCodeImage(string strCheckCode)
{
if (strCheckCode == null || strCheckCode.Trim() == String.Empty)
{
return;
}
System.Drawing.Bitmap image = new System.Drawing.Bitmap((int)Math.Ceiling((strCheckCode.Length * 12.5)), 22);
Graphics g = Graphics.FromImage(image);
try
{
//生成随机生成器
Random random = new Random();
//清空图片背景色
g.Clear(Color.Azure);
////画图片的背景噪音线
//for (int i = 0; i < 25; i++)
//{
// int x1 = random.Next(image.Width);
// int x2 = random.Next(image.Width);
// int y1 = random.Next(image.Height);
// int y2 = random.Next(image.Height);
// g.DrawLine(new Pen(Color.Silver), x1, y1, x2, y2);
//}
Font font = new System.Drawing.Font("Arial", 12, (System.Drawing.FontStyle.Bold | System.Drawing.FontStyle.Italic));
System.Drawing.Drawing2D.LinearGradientBrush brush = new System.Drawing.Drawing2D.LinearGradientBrush(new Rectangle(0, 0, image.Width, image.Height), Color.Blue, Color.DarkRed, 1.2f, true);
g.DrawString(strCheckCode, font, brush, 2, 2);
////画图片的前景噪音点
//for (int i = 0; i < 100; i++)
//{
// int x = random.Next(image.Width);
// int y = random.Next(image.Height);
// image.SetPixel(x, y, Color.FromArgb(random.Next()));
//}
//画图片的边框线
g.DrawRectangle(new Pen(Color.Silver), 0, 0, image.Width - 1, image.Height - 1);
System.IO.MemoryStream ms = new System.IO.MemoryStream();
image.Save(ms, System.Drawing.Imaging.ImageFormat.Gif);
Response.ClearContent();
Response.ContentType = "image/Gif";
Response.BinaryWrite(ms.ToArray());
}
finally
{
g.Dispose();
image.Dispose();
}
}
void ExecuteWithAbi(string supportedAbis, string apkInputPath, string apkOutputPath)
{
ArchiveFileList files = new ArchiveFileList();
if (apkInputPath != null)
{
File.Copy(apkInputPath, apkOutputPath + "new", overwrite: true);
}
using (var apk = new ZipArchiveEx(apkOutputPath + "new", apkInputPath != null ? FileMode.Open : FileMode.Create)) {
apk.Archive.AddEntry("NOTICE",
Assembly.GetExecutingAssembly().GetManifestResourceStream("NOTICE.txt"));
// Add classes.dx
apk.Archive.AddFiles(DalvikClasses, useFileDirectories: false);
if (EmbedAssemblies && !BundleAssemblies)
{
AddAssemblies(apk);
}
AddEnvironment(apk);
AddRuntimeLibraries(apk, supportedAbis);
apk.Flush();
AddNativeLibraries(files, supportedAbis);
apk.Flush();
AddAdditionalNativeLibraries(files, supportedAbis);
apk.Flush();
AddNativeLibrariesFromAssemblies(apk, supportedAbis);
apk.Flush();
foreach (ITaskItem typemap in TypeMappings)
{
apk.Archive.AddFile(typemap.ItemSpec, Path.GetFileName(typemap.ItemSpec), compressionMethod: CompressionMethod.Store);
}
int count = 0;
foreach (var file in files)
{
var item = Path.Combine(file.Item2, Path.GetFileName(file.Item1))
.Replace(Path.DirectorySeparatorChar, '/');
if (apk.Archive.ContainsEntry(item))
{
Log.LogWarning(null, "XA4301", null, file.Item1, 0, 0, 0, 0, "Apk already contains the item {0}; ignoring.", item);
continue;
}
apk.Archive.AddFile(file.Item1, item);
count++;
if (count == ZipArchiveEx.ZipFlushLimit)
{
apk.Flush();
count = 0;
}
}
if (_Debug)
{
AddGdbservers(apk, files, supportedAbis, debugServer);
}
var jarFiles = (JavaSourceFiles != null) ? JavaSourceFiles.Where(f => f.ItemSpec.EndsWith(".jar")) : null;
if (jarFiles != null && JavaLibraries != null)
{
jarFiles = jarFiles.Concat(JavaLibraries);
}
else if (JavaLibraries != null)
{
jarFiles = JavaLibraries;
}
var libraryProjectJars = MonoAndroidHelper.ExpandFiles(LibraryProjectJars)
.Where(jar => !MonoAndroidHelper.IsEmbeddedReferenceJar(jar));
var jarFilePaths = libraryProjectJars.Concat(jarFiles != null ? jarFiles.Select(j => j.ItemSpec) : Enumerable.Empty <string> ());
jarFilePaths = MonoAndroidHelper.DistinctFilesByContent(jarFilePaths);
count = 0;
foreach (var jarFile in jarFilePaths)
{
using (var jar = ZipArchive.Open(File.OpenRead(jarFile))) {
foreach (var jarItem in jar.Where(ze => !ze.IsDirectory && !ze.FullName.StartsWith("META-INF") && !ze.FullName.EndsWith(".class") && !ze.FullName.EndsWith(".java") && !ze.FullName.EndsWith("MANIFEST.MF")))
{
byte [] data;
using (var d = new System.IO.MemoryStream()) {
jarItem.Extract(d);
data = d.ToArray();
}
if (apk.Archive.Any(e => e.FullName == jarItem.FullName))
{
Log.LogMessage("Warning: failed to add jar entry {0} from {1}: the same file already exists in the apk", jarItem.FullName, Path.GetFileName(jarFile));
}
else
{
apk.Archive.AddEntry(data, jarItem.FullName);
}
}
}
count++;
if (count == ZipArchiveEx.ZipFlushLimit)
{
apk.Flush();
count = 0;
}
}
if (StubApplicationDataFile != null && File.Exists(StubApplicationDataFile))
{
apk.Archive.AddFile(StubApplicationDataFile, Path.GetFileName(StubApplicationDataFile));
}
}
MonoAndroidHelper.CopyIfZipChanged(apkOutputPath + "new", apkOutputPath);
File.Delete(apkOutputPath + "new");
}
public static byte[] GenerateExcel(this IEnumerable <Showroom> showrooms, string password, string imagePath)
{
int count = 0;
int line = 2;
int col = 0;
FileInfo fileInfo = new FileInfo(@"C:\Excel.xlsx");
ExcelPackage xlPackage = new ExcelPackage(fileInfo);
xlPackage.Workbook.Protection.SetPassword(password);
var sheet = xlPackage.Workbook.Worksheets[DateTime.Now.ToString("yyyyMMdd")];
if (sheet == null)
{
sheet = xlPackage.Workbook.Worksheets.Add(DateTime.Now.ToString("yyyyMMdd"));
}
Bitmap bitmap = new Bitmap(imagePath);
if (bitmap != null)
{
int Height = 100;
int Width = 50;
ExcelPicture pic = sheet.Drawings.AddPicture("Sample", bitmap);
pic.SetPosition(0, 0, 0, 0);
pic.SetSize(Height, Width);
}
var cells = sheet.Cells;
//title
cells[4, 1].Value = "Showrooms";
int maxCarsFinal = 0;
#region SetMaxForFields
foreach (Showroom showroom in showrooms)
{
int k = 0;
if (showroom.Cars != null)
{
if (maxCarsFinal < showroom.Cars.Count)
{
maxCarsFinal = showroom.Cars.Count;
}
}
k++;
}
#endregion
#region WriteToExcel
line = 6;
foreach (Showroom showroom in showrooms)
{
col = 0;
count = 0;
cells[line, ++col].Value = showroom.Name;
if (showroom.Cars != null)
{
foreach (var car in showroom.Cars)
{
count++;
string displayValue = "Brand: " + car.Brand + ", Model:" + car.Model + ", VIN: " + car.VIN;
cells[line, col + count].Value = displayValue;
}
}
line++;
}
#endregion
count = 1;
#region WriteHeaderToExcel
cells[5, count++].Value = "Name";
for (int j = 0; j < maxCarsFinal; j++)
{
cells[5, count++].Value = "Car " + (j + 1);
}
#endregion
//style
using (var range = cells[1, 1, 5, count])
{
range.Style.Font.Bold = true;
}
xlPackage.Encryption.Password = password; //set password for Excel File
System.IO.MemoryStream output = new System.IO.MemoryStream(xlPackage.GetAsByteArray());
return(output.ToArray());
}
