示例#1
0
        public static List <InterpolatedPoint> interp(Point3d p, Point3d p1, Point3d p2, Point3d p3)
        {
            List <InterpolatedPoint> ps = new List <InterpolatedPoint>();

            p1 = new Point3d(p.X + (p1.X - p.X) / 4, p.Y + (p1.Y - p.Y) / 4, p.Z + (p1.Z - p.Z) / 4);

            p2 = new Point3d(p.X + (p2.X - p.X) / 4, p.Y + (p2.Y - p.Y) / 4, p.Z + (p2.Z - p.Z) / 4);

            p3 = new Point3d(p.X + (p3.X - p.X) / 4, p.Y + (p3.Y - p.Y) / 4, p.Z + (p3.Z - p.Z) / 4);

            //pl.Sort(new My.Point3dComparer());
            //Point3d p1 = pl[0], p2 = pl[1], p3 = pl[2];
            Autodesk.AutoCAD.Geometry.Plane    plane1  = new Autodesk.AutoCAD.Geometry.Plane(p1, p2, p3);
            Autodesk.AutoCAD.Geometry.Matrix3d prjMat1 = Autodesk.AutoCAD.Geometry.Matrix3d.Projection(plane1, plane1.Normal);

            Point3d prjP = p.TransformBy(prjMat1);

            Autodesk.AutoCAD.Geometry.Vector3d direction = new Autodesk.AutoCAD.Geometry.Vector3d(p.X - prjP.X, p.Y - prjP.Y, p.Z - prjP.Z);

            Point3d tp = p1.TransformBy(Autodesk.AutoCAD.Geometry.Matrix3d.Displacement(direction * 1 / 3));

            ps.Add(new InterpolatedPoint(direction.Length, new Point(tp.X, tp.Y, tp.Z)));
            tp = p2.TransformBy(Autodesk.AutoCAD.Geometry.Matrix3d.Displacement(direction * 1 / 3));
            ps.Add(new InterpolatedPoint(direction.Length, new Point(tp.X, tp.Y, tp.Z)));
            tp = p3.TransformBy(Autodesk.AutoCAD.Geometry.Matrix3d.Displacement(direction * 1 / 3));
            ps.Add(new InterpolatedPoint(direction.Length, new Point(tp.X, tp.Y, tp.Z)));

            return(ps);
        }
示例#2
0
 public static void Transform(List <Edge> el, Autodesk.AutoCAD.Geometry.Matrix3d matrix)
 {
     for (int i = 0; i < el.Count; i++)
     {
         Transform(el[i], matrix);
     }
 }
示例#3
0
 public static void Transform(ngeometry.VectorGeometry.Point p, Autodesk.AutoCAD.Geometry.Matrix3d matrix)
 {
     Autodesk.AutoCAD.Geometry.Point3d p3d = new Point3d(p.X, p.Y, p.Z);
     Autodesk.AutoCAD.Geometry.Point3d r   = p3d.TransformBy(matrix);
     p.X = r.X;
     p.Y = r.Y;
     p.Z = r.Z;
 }
示例#4
0
        public static void Transform(Edge e, Autodesk.AutoCAD.Geometry.Matrix3d matrix)
        {
            /*Point3d p1 = pl[0], p2 = pl[1], p3 = pl[2];
             * Autodesk.AutoCAD.Geometry.Plane plane1 = new Autodesk.AutoCAD.Geometry.Plane(p1, p2, p3);
             * Autodesk.AutoCAD.Geometry.Matrix3d prjMat1 = Autodesk.AutoCAD.Geometry.Matrix3d.Projection(plane1, plane1.Normal);*/

            Transform(e.StartPoint, matrix);
            Transform(e.EndPoint, matrix);
            //Point3d prjP = p.TransformBy(prjMat1);
        }
示例#5
0
        public static CoordinateSystem GetCeometricUcs()
        {
            Editor editor = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Editor;

            Autodesk.AutoCAD.Geometry.Matrix3d currentUserCoordinateSystem = editor.CurrentUserCoordinateSystem;
            Point3d origin = currentUserCoordinateSystem.CoordinateSystem3d.Origin;

            Autodesk.AutoCAD.Geometry.Vector3d xaxis       = currentUserCoordinateSystem.CoordinateSystem3d.Xaxis;
            Autodesk.AutoCAD.Geometry.Vector3d yaxis       = currentUserCoordinateSystem.CoordinateSystem3d.Yaxis;
            Autodesk.AutoCAD.Geometry.Vector3d zaxis       = currentUserCoordinateSystem.CoordinateSystem3d.Zaxis;
            ngeometry.VectorGeometry.Point     originPoint = new ngeometry.VectorGeometry.Point(origin.X, origin.Y, origin.Z);
            ngeometry.VectorGeometry.Vector3d  e           = new ngeometry.VectorGeometry.Vector3d(xaxis.X, xaxis.Y, xaxis.Z);
            ngeometry.VectorGeometry.Vector3d  e2          = new ngeometry.VectorGeometry.Vector3d(yaxis.X, yaxis.Y, yaxis.Z);
            ngeometry.VectorGeometry.Vector3d  e3          = new ngeometry.VectorGeometry.Vector3d(zaxis.X, zaxis.Y, zaxis.Z);
            return(new ngeometry.VectorGeometry.CoordinateSystem(originPoint, e, e2, e3));
        }
        private Region method_2(SubDMeshHandler subDMeshHandler_0, int int_0)
        {
            Region result;

            try
            {
                using (DBObjectCollection dBObjectCollection = new DBObjectCollection())
                {
                    using (Face face = new Face(new Point3d(subDMeshHandler_0.Vertices[subDMeshHandler_0.FaceVertexIndex1[int_0]].X, subDMeshHandler_0.Vertices[subDMeshHandler_0.FaceVertexIndex1[int_0]].Y, subDMeshHandler_0.Vertices[subDMeshHandler_0.FaceVertexIndex1[int_0]].Z), new Point3d(subDMeshHandler_0.Vertices[subDMeshHandler_0.FaceVertexIndex2[int_0]].X, subDMeshHandler_0.Vertices[subDMeshHandler_0.FaceVertexIndex2[int_0]].Y, subDMeshHandler_0.Vertices[subDMeshHandler_0.FaceVertexIndex2[int_0]].Z), new Point3d(subDMeshHandler_0.Vertices[subDMeshHandler_0.FaceVertexIndex3[int_0]].X, subDMeshHandler_0.Vertices[subDMeshHandler_0.FaceVertexIndex3[int_0]].Y, subDMeshHandler_0.Vertices[subDMeshHandler_0.FaceVertexIndex3[int_0]].Z), false, false, false, false))
                    {
                        dBObjectCollection.Add(face);
                        Region region = Region.CreateFromCurves(dBObjectCollection)[0] as Region;
                        result = region;
                    }
                }
            }
            catch (System.Exception ex)
            {
                for (double num = 0.001; num <= 1000.0; num *= 10.0)
                {
                    try
                    {
                        using (DBObjectCollection dBObjectCollection2 = new DBObjectCollection())
                        {
                            using (Face face2 = new Face(new Point3d(subDMeshHandler_0.Vertices[subDMeshHandler_0.FaceVertexIndex1[int_0]].X, subDMeshHandler_0.Vertices[subDMeshHandler_0.FaceVertexIndex1[int_0]].Y, subDMeshHandler_0.Vertices[subDMeshHandler_0.FaceVertexIndex1[int_0]].Z), new Point3d(subDMeshHandler_0.Vertices[subDMeshHandler_0.FaceVertexIndex2[int_0]].X, subDMeshHandler_0.Vertices[subDMeshHandler_0.FaceVertexIndex2[int_0]].Y, subDMeshHandler_0.Vertices[subDMeshHandler_0.FaceVertexIndex2[int_0]].Z), new Point3d(subDMeshHandler_0.Vertices[subDMeshHandler_0.FaceVertexIndex3[int_0]].X, subDMeshHandler_0.Vertices[subDMeshHandler_0.FaceVertexIndex3[int_0]].Y, subDMeshHandler_0.Vertices[subDMeshHandler_0.FaceVertexIndex3[int_0]].Z), false, false, false, false))
                            {
                                Autodesk.AutoCAD.Geometry.Matrix3d matrix3d  = Autodesk.AutoCAD.Geometry.Matrix3d.Scaling(num, new Point3d(0.0, 0.0, 0.0));
                                Autodesk.AutoCAD.Geometry.Matrix3d matrix3d2 = Autodesk.AutoCAD.Geometry.Matrix3d.Scaling(1.0 / num, new Point3d(0.0, 0.0, 0.0));
                                face2.TransformBy(matrix3d);
                                dBObjectCollection2.Add(face2);
                                Region region2 = Region.CreateFromCurves(dBObjectCollection2)[0] as Region;
                                region2.TransformBy(matrix3d2);
                                result = region2;
                                return(result);
                            }
                        }
                    }
                    catch (System.Exception ex111)
                    {
                    }
                }
                result = null;
            }
            return(result);
        }
示例#7
0
        public static PointSet __interp(Point3d p, List <LineSegment3d> ll)
        {
            if (ll.Count < 3)
            {
                return(null);
            }
            PointSet       ps = new PointSet();
            List <Point3d> pl = new List <Point3d>();
            Point3d        ortherP;

            for (int i = 0; i < ll.Count; i++)
            {
                if (p == ll[0].EndPoint)
                {
                    ortherP = ll[0].StartPoint;
                }
                else
                {
                    ortherP = ll[i].EndPoint;
                }
                Point3d tp = new Point3d(p.X + (ortherP.X - p.X) / 3, p.Y + (ortherP.Y - p.Y) / 3, p.Z + (ortherP.Z - p.Z) / 3);
                pl.Add(tp);
            }
            Point3d p1 = pl[0], p2 = pl[1], p3 = pl[2];

            Autodesk.AutoCAD.Geometry.Plane    plane1  = new Autodesk.AutoCAD.Geometry.Plane(p1, p2, p3);
            Autodesk.AutoCAD.Geometry.Matrix3d prjMat1 = Autodesk.AutoCAD.Geometry.Matrix3d.Projection(plane1, plane1.Normal);


            Point3d prjP = p.TransformBy(prjMat1);

            Autodesk.AutoCAD.Geometry.Vector3d direction = new Autodesk.AutoCAD.Geometry.Vector3d(p.X - prjP.X, p.Y - prjP.Y, p.Z - prjP.Z);
            for (int i = 0; i < pl.Count; i++)
            {
                //double d = p.DistanceTo(prjP);
                ;
                Point3d tp = pl[i].TransformBy(Autodesk.AutoCAD.Geometry.Matrix3d.Displacement(direction * 2 / 3));
                ps.Add(new Point(tp.X, tp.Y, tp.Z));
            }

            return(ps);
        }
示例#8
0
        internal static ProjectClass getMovement(Point3d p, Point3d p1, Point3d p2, Point3d p3)
        {
            List <InterpolatedPoint> ps = new List <InterpolatedPoint>();

            //p1 = new Point3d(p.X + (p1.X - p.X) / 4, p.Y + (p1.Y - p.Y) / 4, p.Z + (p1.Z - p.Z) / 4);

            //p2 = new Point3d(p.X + (p2.X - p.X) / 4, p.Y + (p2.Y - p.Y) / 4, p.Z + (p2.Z - p.Z) / 4);

            //p3= new Point3d(p.X + (p3.X - p.X) /4, p.Y + (p3.Y - p.Y) / 4, p.Z + (p3.Z - p.Z) / 4);

            //pl.Sort(new My.Point3dComparer());
            //Point3d p1 = pl[0], p2 = pl[1], p3 = pl[2];
            Autodesk.AutoCAD.Geometry.Plane    plane1  = new Autodesk.AutoCAD.Geometry.Plane(p1, p2, p3);
            Autodesk.AutoCAD.Geometry.Matrix3d prjMat1 = Autodesk.AutoCAD.Geometry.Matrix3d.Projection(plane1, plane1.Normal);

            Point3d prjP = p.TransformBy(prjMat1);

            Autodesk.AutoCAD.Geometry.Vector3d direction = new Autodesk.AutoCAD.Geometry.Vector3d(p.X - prjP.X, p.Y - prjP.Y, p.Z - prjP.Z);
            List <Point3d> pl = new List <Point3d>();

            pl.Add(p1); pl.Add(p2); pl.Add(p3);
            return(new ProjectClass(plane1, prjMat1, direction, pl));
        }
示例#9
0
 internal ProjectClass(Autodesk.AutoCAD.Geometry.Plane p, Autodesk.AutoCAD.Geometry.Matrix3d m, Autodesk.AutoCAD.Geometry.Vector3d d, List <Point3d> pl)
 {
     plane = p; prjMat = m; direction = d; points = pl;
 }
示例#10
0
        private void method_0(ObjectId[] objectId_0, ProgressMeter progressMeter_0, CoordinateSystem coordinateSystem_0)
        {
            Database       workingDatabase = HostApplicationServices.WorkingDatabase;
            Editor         editor          = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Editor;
            List <Solid3d> list            = new List <Solid3d>();
            double         epsilon         = Convert.ToDouble(CMD_FacesToSolid.string_2);
            bool           flag            = true;

            if (CMD_FacesToSolid.string_0 == "N")
            {
                flag = false;
            }
            DBManager.SetEpsilon();
            List <Triangle> list2 = Conversions.ToCeometricAcDbTriangleList(objectId_0);

            if (!Conversions.IsWCS(coordinateSystem_0))
            {
                Triangle.TransformCoordinates(list2, CoordinateSystem.Global(), coordinateSystem_0);
            }
            list2.Sort(new Triangle.CompareMinX());
            int    num  = 0;
            double num2 = -1.7976931348623157E+308;
            double num3 = -1.7976931348623157E+308;
            double num4 = 1.7976931348623157E+308;
            double num5 = 1.7976931348623157E+308;

            for (int i = list2.Count - 1; i >= 0; i--)
            {
                if (list2[i].NormalVector.IsOrthogonalTo(new ngeometry.VectorGeometry.Vector3d(0.0, 0.0, 1.0)))
                {
                    list2.RemoveAt(i);
                    num++;
                }
                else
                {
                    double minimumX = list2[i].MinimumX;
                    if (minimumX < num4)
                    {
                        num4 = minimumX;
                    }
                    double maximumX = list2[i].MaximumX;
                    if (maximumX > num2)
                    {
                        num2 = maximumX;
                    }
                    double minimumY = list2[i].MinimumY;
                    if (minimumY < num5)
                    {
                        num5 = minimumY;
                    }
                    double maximumY = list2[i].MaximumY;
                    if (maximumY > num3)
                    {
                        num3 = maximumY;
                    }
                }
            }
            ngeometry.VectorGeometry.Vector3d vector3d = new ngeometry.VectorGeometry.Vector3d(0.5 * (num4 + num2), 0.5 * (num5 + num3), 0.0);
            double num6 = 0.5 * Math.Max(Math.Abs(num2 - num4), Math.Abs(num3 - num5));
            double num7 = Math.Ceiling(100000.0 / num6);

            for (int j = 0; j < list2.Count; j++)
            {
                list2[j] = list2[j].Move(-1.0 * vector3d);
            }
            SubDMeshHandler subDMeshHandler = new SubDMeshHandler(list2);

            subDMeshHandler.BuildDataStructure(false);
            int k = 2147483647;

            while (k > 0)
            {
                this.messageFilter_0.CheckMessageFilter();
                k    = subDMeshHandler.HealXY(epsilon);
                num += k;
            }
            editor.WriteMessage("\nDegenerate projections healed: " + num);
            Autodesk.AutoCAD.Geometry.Matrix3d matrix3d  = Autodesk.AutoCAD.Geometry.Matrix3d.Scaling(num7, new Point3d(0.0, 0.0, 0.0));
            Autodesk.AutoCAD.Geometry.Matrix3d matrix3d2 = Autodesk.AutoCAD.Geometry.Matrix3d.Scaling(1.0 / num7, new Point3d(0.0, 0.0, 0.0));
            Autodesk.AutoCAD.Geometry.Matrix3d matrix3d3 = Autodesk.AutoCAD.Geometry.Matrix3d.Displacement(new Autodesk.AutoCAD.Geometry.Vector3d(vector3d.X, vector3d.Y, 0.0));
            progressMeter_0 = new ProgressMeter();
            progressMeter_0.SetLimit(objectId_0.Length);
            progressMeter_0.Start("Extruding objects");
            int num8 = 0;
            int num9 = 0;

            for (int l = 0; l < subDMeshHandler.FaceVertexIndex1.Count; l++)
            {
                try
                {
                    progressMeter_0.MeterProgress();
                    this.messageFilter_0.CheckMessageFilter((long)l, 1000);
                }
                catch (System.Exception ex)
                {
                    for (int m = 0; m < list.Count; m++)
                    {
                        list[m].Dispose();
                    }
                    progressMeter_0.Stop();
                    throw;
                }
                try
                {
                    Face   face = new Face(new Point3d(subDMeshHandler.Vertices[subDMeshHandler.FaceVertexIndex1[l]].X, subDMeshHandler.Vertices[subDMeshHandler.FaceVertexIndex1[l]].Y, subDMeshHandler.Vertices[subDMeshHandler.FaceVertexIndex1[l]].Z), new Point3d(subDMeshHandler.Vertices[subDMeshHandler.FaceVertexIndex2[l]].X, subDMeshHandler.Vertices[subDMeshHandler.FaceVertexIndex2[l]].Y, subDMeshHandler.Vertices[subDMeshHandler.FaceVertexIndex2[l]].Z), new Point3d(subDMeshHandler.Vertices[subDMeshHandler.FaceVertexIndex3[l]].X, subDMeshHandler.Vertices[subDMeshHandler.FaceVertexIndex3[l]].Y, subDMeshHandler.Vertices[subDMeshHandler.FaceVertexIndex3[l]].Z), false, false, false, false);
                    double z    = face.GetVertexAt(0).Z;
                    double z2   = face.GetVertexAt(1).Z;
                    double z3   = face.GetVertexAt(2).Z;
                    short  num10;
                    if (CMD_FacesToSolid.double_0 < 0.0)
                    {
                        if (z <= z2 && z <= z3)
                        {
                            num10 = 0;
                        }
                        else if (z2 <= z && z2 <= z3)
                        {
                            num10 = 1;
                        }
                        else
                        {
                            num10 = 2;
                        }
                    }
                    else if (z >= z2 && z >= z3)
                    {
                        num10 = 0;
                    }
                    else if (z2 >= z && z2 >= z3)
                    {
                        num10 = 1;
                    }
                    else
                    {
                        num10 = 2;
                    }
                    Point3d vertexAt = face.GetVertexAt(num10);
                    Point3d point3d  = new Point3d(vertexAt.X, vertexAt.Y, vertexAt.Z + CMD_FacesToSolid.double_0);
                    //point3d..ctor(vertexAt.X, vertexAt.Y, vertexAt.Z + CMD_FacesToSolid.double_0);
                    Autodesk.AutoCAD.DatabaseServices.Line line = new Autodesk.AutoCAD.DatabaseServices.Line(vertexAt, point3d);
                    Region region = this.method_2(subDMeshHandler, l);
                    if (region == null)
                    {
                        num8++;
                    }
                    else
                    {
                        region.TransformBy(matrix3d);
                        line.TransformBy(matrix3d);
                        try
                        {
                            Solid3d solid3d = new Solid3d();
                            solid3d.ExtrudeAlongPath(region, line, 0.0);
                            solid3d.SetPropertiesFrom(face);
                            list.Add(solid3d);
                        }
                        catch (System.Exception ex)
                        {
                            num9++;
                        }
                        line.Dispose();
                        region.Dispose();
                    }
                }
                catch (System.Exception ex)
                {
                }
            }
            editor.WriteMessage("\nNumber of failed projections: " + num8.ToString());
            editor.WriteMessage("\nNumber of failed extrusions : " + num8.ToString());
            progressMeter_0.Stop();
            if (flag && list.Count > 1)
            {
                progressMeter_0 = new ProgressMeter();
                int limit = (int)Math.Ceiling(Math.Log((double)list.Count) / Math.Log(2.0));
                progressMeter_0.SetLimit(limit);
                progressMeter_0.Start("Building solid");
                this.method_1(ref list, ref progressMeter_0);
            }
            using (Transaction transaction = workingDatabase.TransactionManager.StartTransaction())
            {
                BlockTable       blockTable       = (BlockTable)transaction.GetObject(workingDatabase.BlockTableId, (OpenMode)1);
                BlockTableRecord blockTableRecord = (BlockTableRecord)transaction.GetObject(blockTable[BlockTableRecord.ModelSpace], (OpenMode)1);
                for (int n = 0; n < list.Count; n++)
                {
                    list[n].TransformBy(matrix3d2);
                    list[n].TransformBy(matrix3d3);
                    CoordinateTransformator coordinateTransformator = new CoordinateTransformator(coordinateSystem_0, CoordinateSystem.Global());
                    if (!coordinateTransformator.bool_0)
                    {
                        list[n].TransformBy(coordinateTransformator.ToAcadTransformation());
                    }
                    blockTableRecord.AppendEntity(list[n]);
                    transaction.AddNewlyCreatedDBObject(list[n], true);
                }
                transaction.Commit();
            }
            progressMeter_0.Stop();
        }
示例#11
0
        private void method_0(ObjectId[] objectId_0, ref ProgressMeter progressMeter_0, CoordinateSystem coordinateSystem_0)
        {
            Database      workingDatabase = HostApplicationServices.WorkingDatabase;
            Editor        editor          = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Editor;
            List <Region> list            = new List <Region>();
            double        epsilon         = Convert.ToDouble(CMD_Silhouette.string_1);

            DBManager.SetEpsilon();
            List <Triangle> list2 = Conversions.ToCeometricAcDbTriangleList(objectId_0);

            if (!Conversions.IsWCS(coordinateSystem_0))
            {
                Triangle.TransformCoordinates(list2, CoordinateSystem.Global(), coordinateSystem_0);
            }
            list2.Sort(new Triangle.CompareMinX());
            int    num  = 0;
            double num2 = -1.7976931348623157E+308;
            double num3 = -1.7976931348623157E+308;
            double num4 = 1.7976931348623157E+308;
            double num5 = 1.7976931348623157E+308;

            for (int i = list2.Count - 1; i >= 0; i--)
            {
                if (list2[i].NormalVector.IsOrthogonalTo(new ngeometry.VectorGeometry.Vector3d(0.0, 0.0, 1.0)))
                {
                    list2.RemoveAt(i);
                    num++;
                }
                else
                {
                    Global.SuspendEpsilon(0.0, 0.0);
                    list2[i].Vertex1.Z = 0.0;
                    list2[i].Vertex2.Z = 0.0;
                    list2[i].Vertex3.Z = 0.0;
                    Global.ResumeEpsilon();
                    double minimumX = list2[i].MinimumX;
                    if (minimumX < num4)
                    {
                        num4 = minimumX;
                    }
                    double maximumX = list2[i].MaximumX;
                    if (maximumX > num2)
                    {
                        num2 = maximumX;
                    }
                    double minimumY = list2[i].MinimumY;
                    if (minimumY < num5)
                    {
                        num5 = minimumY;
                    }
                    double maximumY = list2[i].MaximumY;
                    if (maximumY > num3)
                    {
                        num3 = maximumY;
                    }
                }
            }
            ngeometry.VectorGeometry.Vector3d vector3d = new ngeometry.VectorGeometry.Vector3d(0.5 * (num4 + num2), 0.5 * (num5 + num3), 0.0);
            double num6 = 0.5 * Math.Max(Math.Abs(num2 - num4), Math.Abs(num3 - num5));
            double num7 = Math.Ceiling(100000.0 / num6);

            for (int j = 0; j < list2.Count; j++)
            {
                list2[j] = list2[j].Move(-1.0 * vector3d);
            }
            SubDMeshHandler subDMeshHandler = new SubDMeshHandler(list2);

            subDMeshHandler.BuildDataStructure(false);
            int k = 2147483647;

            while (k > 0)
            {
                this.messageFilter_0.CheckMessageFilter();
                k    = subDMeshHandler.Heal(epsilon);
                num += k;
            }
            editor.WriteMessage("\nDegenerate projections healed: " + num);
            Autodesk.AutoCAD.Geometry.Matrix3d matrix3d  = Autodesk.AutoCAD.Geometry.Matrix3d.Scaling(num7, new Point3d(0.0, 0.0, 0.0));
            Autodesk.AutoCAD.Geometry.Matrix3d matrix3d2 = Autodesk.AutoCAD.Geometry.Matrix3d.Scaling(1.0 / num7, new Point3d(0.0, 0.0, 0.0));
            Autodesk.AutoCAD.Geometry.Matrix3d matrix3d3 = Autodesk.AutoCAD.Geometry.Matrix3d.Displacement(new Autodesk.AutoCAD.Geometry.Vector3d(vector3d.X, vector3d.Y, 0.0));
            progressMeter_0 = new ProgressMeter();
            progressMeter_0.SetLimit(subDMeshHandler.FaceVertexIndex1.Count);
            progressMeter_0.Start("Generating projections");
            int num8 = 0;

            for (int l = 0; l < subDMeshHandler.FaceVertexIndex1.Count; l++)
            {
                try
                {
                    progressMeter_0.MeterProgress();
                    this.messageFilter_0.CheckMessageFilter((long)l, 1000);
                }
                catch (System.Exception ex)
                {
                    for (int m = 0; m < list.Count; m++)
                    {
                        list[m].Dispose();
                    }
                    progressMeter_0.Stop();
                    throw;
                }
                Region region = this.method_2(subDMeshHandler, l);
                if (region == null)
                {
                    num8++;
                }
                else
                {
                    region.TransformBy(matrix3d);
                    list.Add(region);
                }
            }
            editor.WriteMessage("\nNumber of failed projections: " + num8.ToString());
            progressMeter_0.Stop();
            progressMeter_0 = new ProgressMeter();
            int limit = (int)Math.Ceiling(Math.Log((double)list.Count) / Math.Log(2.0));

            progressMeter_0.SetLimit(limit);
            progressMeter_0.Start("Computing silhouette");
            if (list.Count > 1)
            {
                this.method_1(ref list, ref progressMeter_0);
            }
            list[0].TransformBy(matrix3d2);
            list[0].TransformBy(matrix3d3);
            CoordinateTransformator coordinateTransformator = new CoordinateTransformator(coordinateSystem_0, CoordinateSystem.Global());

            if (!coordinateTransformator.bool_0)
            {
                list[0].TransformBy(coordinateTransformator.ToAcadTransformation());
            }
            using (Transaction transaction = workingDatabase.TransactionManager.StartTransaction())
            {
                BlockTable       blockTable       = (BlockTable)transaction.GetObject(workingDatabase.BlockTableId, (OpenMode)1);
                BlockTableRecord blockTableRecord = (BlockTableRecord)transaction.GetObject(blockTable[BlockTableRecord.ModelSpace], (OpenMode)1);
                blockTableRecord.AppendEntity(list[0]);
                transaction.AddNewlyCreatedDBObject(list[0], true);
                transaction.Commit();
            }
            progressMeter_0.Stop();
        }