public int CompareTo(object c)
{
ISectData c1 = this;
ISectData c2 = (ISectData)c;
double d1 = (c1.origin.x - c1.intersect.x) * (c1.origin.x - c1.intersect.x) +
(c1.origin.y - c1.intersect.y) * (c1.origin.y - c1.intersect.y) +
(c1.origin.z - c1.intersect.z) * (c1.origin.z - c1.intersect.z);
double d2 = (c2.origin.x - c2.intersect.x) * (c2.origin.x - c2.intersect.x) +
(c2.origin.y - c2.intersect.y) * (c2.origin.y - c2.intersect.y) +
(c2.origin.z - c2.intersect.z) * (c2.origin.z - c2.intersect.z);
if (d1 > d2)
{
return(1);
}
if (d1 < d2)
{
return(-1);
}
else
{
return(0);
}
}
/// <summary>
/// This functiuon positions the base at the location 'intersect'
/// The idir is the direction that was used to intersect
/// </summary>
/// <param name="intersect"></param>
/// <param name="idir"></param>
/// <param name="inorm"></param>
public void PositionBottom(ISectData dat)
{
// the bottom could be a tip or base
// need to orient the bottom and position it.
Point3d center;
// for a base support, just slide it around
if (m_subtype == eSubType.eBase)
{
center = Centroid(); // get the centroid of the selected portion of the object
MinMax mm = CalcMinMaxRange(s1i, s4i);
float dist = (float)((mm.m_max - mm.m_min) / 2);
Translate(
(float)(dat.intersect.x - center.x),
(float)(dat.intersect.y - center.y),
(float)(dat.intersect.z - center.z + dist));
}
else if (m_subtype == eSubType.eIntra) // bottom tip
{
// for a base tip, find the angle and angle it in
Vector3d isectnorm = new Vector3d();
//save the polygon intersection normal
isectnorm.x = dat.poly.m_normal.x;
isectnorm.y = dat.poly.m_normal.y;
isectnorm.z = dat.poly.m_normal.z;
isectnorm.Normalize();
if (isectnorm.z < 0)
{
isectnorm.z *= -1.0f;
}
// limit the z down to 45 degrees
if (isectnorm.z < .75)
{
isectnorm.z = .75f;
}
// re-genrate the points on the bottom of the foot
ReGenSegmentPoints(mSC.htrad, mSC.cdivs, s1i, 0, true); // bottom of foot is the tip radius
Matrix3D tMat = new Matrix3D();
Vector3d vup = new Vector3d(0, 1, 0);
Vector3d dir = new Vector3d(isectnorm.x, isectnorm.y, isectnorm.z);
dir.Normalize();
//direction should be upward at this point.
//create a matrix transform
tMat.LookAt(dir, vup);
//transform the si1-s2i points to look at the vector
TransformRange(tMat, s1i, s2i);
//move the range of points to be touching the intersection point
STranslateRange(dat.intersect.x, dat.intersect.y, dat.intersect.z, s1i, s2i);
//now, get the center of s4i to s5i
Point3d cnt = CalcCentroid(s2i, s4i);
//translate to 0,0,0
STranslateRange(-cnt.x, -cnt.y, -cnt.z, s2i, s4i);
//reset the points,
ReGenSegmentPoints(mSC.hbrad, mSC.cdivs, s2i, 0, false); // top of foot
ReGenSegmentPoints(mSC.hbrad, mSC.cdivs, s3i, 0, false); // top of foot
Point3d newp = new Point3d();
newp.x = dat.intersect.x + (isectnorm.x * 2);
newp.y = dat.intersect.y + (isectnorm.y * 2);
newp.z = dat.intersect.z + (isectnorm.z * 2);
STranslateRange(newp.x,newp.y,newp.z, s2i, s4i);
Update();
}
//Update();
}
public void MoveFromTip(ISectData dat)
{
Point3d center;
center = Centroid(); // get the centroid of the selected portion of the object
Vector3d isectnorm = new Vector3d();
//save the polygon intersection normal
isectnorm.x = dat.poly.m_normal.x;
isectnorm.y = dat.poly.m_normal.y;
isectnorm.z = dat.poly.m_normal.z;
MinMax mm = CalcMinMaxRange(s4i, m_lstpoints.Count);
float dist = (float)((mm.m_max - mm.m_min) );
ResetTip();
Matrix3D tMat = new Matrix3D();
Vector3d vup = new Vector3d(0,1,0);
//always make sure the z is heading downward
if (isectnorm.z > 0)
{
isectnorm.z *= -1.0f;
}
// limit the z down to 45 degrees
if (isectnorm.z > -.75)
{
isectnorm.z = -.75f;
}
//reverse the direction to get the reflection
Vector3d dir = new Vector3d(-isectnorm.x, -isectnorm.y, -isectnorm.z);
dir.Normalize();
//create a matrix transform
tMat.LookAt(dir, vup);
Transform(tMat);
Translate(
(float)(dat.intersect.x),
(float)(dat.intersect.y),
(float)(dat.intersect.z));
//now, get the center of s4i to s5i
Point3d cnt = CalcCentroid(s4i, s5i);
//translate to 0
TranslateRange(-cnt.x, -cnt.y, -cnt.z, s4i, s5i);
//reset the points,
ReGenSegmentPoints(mSC.hbrad, mSC.cdivs, s4i, 0, false); // bottom of head
//move back
TranslateRange(cnt.x, cnt.y, cnt.z, s4i, s5i);
Update();
//
}
