public Main()
{
executeHostCall = new executeHostCommandDelegate(this.executeHostCommand);
repetierKey = Custom.BaseKey; // Registry.CurrentUser.CreateSubKey("SOFTWARE\\Repetier");
repetierKey.SetValue("installPath", Application.StartupPath);
if (Path.DirectorySeparatorChar != '\\' && IsRunningOnMac())
IsMac = true;
/*String[] parms = Environment.GetCommandLineArgs();
string lastcom = "";
foreach (string s in parms)
{
if (lastcom == "-home")
{
repetierKey.SetValue("installPath",s);
lastcom = "";
continue;
}
if (s == "-macosx") IsMac = true;
lastcom = s;
}*/
main = this;
SplashScreen.run();
trans = new Trans(Application.StartupPath + Path.DirectorySeparatorChar + "data" + Path.DirectorySeparatorChar + "translations");
SwitchButton.imageOffset = RegMemory.GetInt("onOffImageOffset", 0);
generator = new GCodeGenerator();
globalSettings = new GlobalSettings();
conn = new PrinterConnection();
printerSettings = new FormPrinterSettings();
printerModel = new PrinterModel();
conn.analyzer.start(true);
threeDSettings = new ThreeDSettings();
InitializeComponent();
tdSettings.DataSource = threeDSettings;
tdSettings_DataMemberChanged(null, null);
editor = new RepetierEditor();
editor.Dock = DockStyle.Fill;
tabGCode.Controls.Add(editor);
updateShowFilament();
RegMemory.RestoreWindowPos("mainWindow", this);
if (WindowState == FormWindowState.Maximized)
Application.DoEvents();
splitLog.SplitterDistance = RegMemory.GetInt("logSplitterDistance", splitLog.SplitterDistance);
splitInfoEdit.SplitterDistance = RegMemory.GetInt("infoEditSplitterDistance", Width-470);
if (IsMono)
{
if (!IsMac)
{
foreach (ToolStripItem m in menu.Items)
{
m.Text = m.Text.Replace("&", null);
}
}
if (IsMac)
{
/*Application.Events.Quit += delegate (object sender, ApplicationEventArgs e) {
Application.Quit ();
e.Handled = true;
};
ApplicationEvents.Reopen += delegate (object sender, ApplicationEventArgs e) {
WindowState = FormWindowState.Normal;
e.Handled = true;
};*/
MinimumSize = new Size(500, 640);
tab.MinimumSize = new Size(500, 500);
splitLog.Panel1MinSize = 520;
splitLog.Panel2MinSize = 100;
splitLog.IsSplitterFixed = true;
//splitContainerPrinterGraphic.SplitterDistance -= 52;
splitLog.SplitterDistance = splitLog.Height - 100;
}
}
slicerToolStripMenuItem.Visible = false;
splitLog.Panel2Collapsed = !RegMemory.GetBool("logShow", true);
splitPrinterId.Panel1Collapsed = !RegMemory.GetBool("printerIdShow", false);
conn.eventConnectionChange += OnPrinterConnectionChange;
conn.eventPrinterAction += OnPrinterAction;
conn.eventJobProgress += OnJobProgress;
objectPlacement = new STLComposer();
objectPlacement.Dock = DockStyle.Fill;
tabModel.Controls.Add(objectPlacement);
printPanel = new PrintPanel();
printPanel.Dock = DockStyle.Fill;
tabPrint.Controls.Add(printPanel);
printerSettings.formToCon();
logView = new LogView();
logView.Dock = DockStyle.Fill;
splitLog.Panel2.Controls.Add(logView);
skeinforge = new Skeinforge();
PrinterChanged(printerSettings.currentPrinterKey, true);
printerSettings.eventPrinterChanged += PrinterChanged;
// GCode print preview
threedview = new ThreeDControl();
threedview.Dock = DockStyle.Fill;
tabPage3DView.Controls.Add(threedview);
printPreview = new ThreeDView();
// printPreview.Dock = DockStyle.Fill;
// splitContainerPrinterGraphic.Panel2.Controls.Add(printPreview);
printPreview.SetEditor(false);
printPreview.autoupdateable = true;
printVisual = new GCodeVisual(conn.analyzer);
printVisual.liveView = true;
printPreview.models.AddLast(printVisual);
basicTitle = Text;
jobPreview = new ThreeDView();
// jobPreview.Dock = DockStyle.Fill;
// splitJob.Panel2.Controls.Add(jobPreview);
jobPreview.SetEditor(false);
jobPreview.models.AddLast(jobVisual);
editor.contentChangedEvent += JobPreview;
editor.commands = new Commands();
editor.commands.Read("default", "en");
UpdateHistory();
UpdateConnections();
Main.slic3r = new Slic3r();
slicer = new Slicer();
//toolShowLog_CheckedChanged(null, null);
updateShowFilament();
assign3DView();
history = new TemperatureHistory();
tempView = new TemperatureView();
tempView.Dock = DockStyle.Fill;
tabPageTemp.Controls.Add(tempView);
if (IsMono)
{
showWorkdirectoryToolStripMenuItem.Visible = false;
toolStrip.Height = 56;
}
new SoundConfig();
//stlComposer1.buttonSlice.Text = Trans.T1("L_SLICE_WITH", slicer.SlicerName);
// Customizations
if(Custom.GetBool("removeTestgenerator",false)) {
internalSlicingParameterToolStripMenuItem.Visible = false;
testCaseGeneratorToolStripMenuItem.Visible = false;
}
string titleAdd = Custom.GetString("titleAddition", "");
string titlePrefix = Custom.GetString("titlePrefix", "");
if (titleAdd.Length > 0 || titlePrefix.Length>0)
{
int p = basicTitle.IndexOf(' ');
basicTitle = titlePrefix+basicTitle.Substring(0, p) + titleAdd + basicTitle.Substring(p);
Text = basicTitle;
}
slicerPanel.UpdateSelection();
if (Custom.GetBool("removeUpdates", false))
checkForUpdatesToolStripMenuItem.Visible = false;
else
RHUpdater.checkForUpdates(true);
UpdateToolbarSize();
// Add languages
foreach (Translation t in trans.translations.Values)
{
ToolStripMenuItem item = new ToolStripMenuItem(t.language,null, languageSelected);
item.Tag = t;
languageToolStripMenuItem.DropDownItems.Add(item);
}
languageChanged += translate;
translate();
if (Custom.GetBool("removeSkeinforge", false))
{
Main.slicer.ActiveSlicer = Slicer.SlicerID.Slic3r;
}
if (Custom.GetBool("extraSupportButton", false))
{
supportToolStripMenuItem.Text = Custom.GetString("extraSupportText", "Support");
}
else
{
toolStripAskSeperator.Visible = false;
supportToolStripMenuItem.Visible = false;
}
if (Custom.GetString("extraLink1Title", "").Length>0)
{
extraUrl1ToolStripMenuItem.Text = Custom.GetString("extraLink1Title", "");
toolStripAskSeperator.Visible = true;
}
else extraUrl1ToolStripMenuItem.Visible = false;
if (Custom.GetString("extraLink2Title", "").Length > 0)
{
extraUrl2ToolStripMenuItem.Text = Custom.GetString("extraLink2Title", "");
toolStripAskSeperator.Visible = true;
}
else extraUrl2ToolStripMenuItem.Visible = false;
if (Custom.GetString("extraLink3Title", "").Length > 0)
{
extraUrl3ToolStripMenuItem.Text = Custom.GetString("extraLink3Title", "");
toolStripAskSeperator.Visible = true;
}
else extraUrl3ToolStripMenuItem.Visible = false;
if (Custom.GetString("extraLink4Title", "").Length > 0)
{
extraUrl4ToolStripMenuItem.Text = Custom.GetString("extraLink4Title", "");
toolStripAskSeperator.Visible = true;
}
else extraUrl4ToolStripMenuItem.Visible = false;
if (Custom.GetString("extraLink5Title", "").Length > 0)
{
extraUrl5ToolStripMenuItem.Text = Custom.GetString("extraLink5Title", "");
toolStripAskSeperator.Visible = true;
}
else extraUrl5ToolStripMenuItem.Visible = false;
string supportImage = Custom.GetString("extraSupportToolbarImage", "");
if (supportImage.Length > 0 && File.Exists(Application.StartupPath + Path.DirectorySeparatorChar + supportImage))
{
toolStripButtonSupport.Image = Image.FromFile(Application.StartupPath + Path.DirectorySeparatorChar + Custom.GetString("extraSupportToolbarImage", ""));
toolStripButtonSupport.Text = Custom.GetString("extraSupportText", "Support");
}
else
{
toolStripButtonSupport.Visible = false;
}
toolAction.Text = Trans.T("L_IDLE");
toolConnection.Text = Trans.T("L_DISCONNECTED");
updateTravelMoves();
printerIdLabel.Text = printerSettings.comboPrinter.Text;
this.AllowDrop = true;
this.DragEnter += new DragEventHandler(Form1_DragEnter);
this.DragDrop += new DragEventHandler(Form1_DragDrop);
extensions.ExtensionManager.Initalize();
if (conn.connector != null)
conn.connector.Activate();
//TestTopoTriangle triTests = new TestTopoTriangle();
//triTests.RunTests();
//everything done. Now look at command line
ProcessCommandLine();
snapshotToolStripMenuItem.Visible = false;
setImportUnits(RegMemory.GetDouble("importScaleFactor", importScaleFactor));
}
public Main()
{
executeHostCall = new executeHostCommandDelegate(this.executeHostCommand);
repetierKey = Custom.BaseKey; // Registry.CurrentUser.CreateSubKey("SOFTWARE\\Repetier");
repetierKey.SetValue("installPath", Application.StartupPath);
if (Path.DirectorySeparatorChar != '\\' && IsRunningOnMac())
IsMac = true;
/*String[] parms = Environment.GetCommandLineArgs();
string lastcom = "";
foreach (string s in parms)
{
if (lastcom == "-home")
{
repetierKey.SetValue("installPath",s);
lastcom = "";
continue;
}
if (s == "-macosx") IsMac = true;
lastcom = s;
}*/
main = this;
trans = new Trans(Application.StartupPath + Path.DirectorySeparatorChar + "data" + Path.DirectorySeparatorChar + "translations");
generator = new GCodeGenerator();
globalSettings = new GlobalSettings();
conn = new PrinterConnection();
printerSettings = new FormPrinterSettings();
conn.analyzer.start();
threeDSettings = new ThreeDSettings();
InitializeComponent();
editor = new RepetierEditor();
editor.Dock = DockStyle.Fill;
tabGCode.Controls.Add(editor);
updateShowFilament();
RegMemory.RestoreWindowPos("mainWindow", this);
if (WindowState == FormWindowState.Maximized)
Application.DoEvents();
splitLog.SplitterDistance = RegMemory.GetInt("logSplitterDistance", splitLog.SplitterDistance);
splitInfoEdit.SplitterDistance = RegMemory.GetInt("infoEditSplitterDistance", Width-470);
if (IsMono)
{
if (!IsMac)
{
foreach (ToolStripItem m in menu.Items)
{
m.Text = m.Text.Replace("&", null);
}
}
if (IsMac)
{
/*Application.Events.Quit += delegate (object sender, ApplicationEventArgs e) {
Application.Quit ();
e.Handled = true;
};
ApplicationEvents.Reopen += delegate (object sender, ApplicationEventArgs e) {
WindowState = FormWindowState.Normal;
e.Handled = true;
};*/
MinimumSize = new Size(500, 640);
tab.MinimumSize = new Size(500, 500);
splitLog.Panel1MinSize = 520;
splitLog.Panel2MinSize = 100;
splitLog.IsSplitterFixed = true;
//splitContainerPrinterGraphic.SplitterDistance -= 52;
splitLog.SplitterDistance = splitLog.Height - 100;
}
}
slicerToolStripMenuItem.Visible = false;
splitLog.Panel2Collapsed = !RegMemory.GetBool("logShow", true);
conn.eventConnectionChange += OnPrinterConnectionChange;
conn.eventPrinterAction += OnPrinterAction;
conn.eventJobProgress += OnJobProgress;
stlComposer1 = new STLComposer();
stlComposer1.Dock = DockStyle.Fill;
tabModel.Controls.Add(stlComposer1);
printPanel = new PrintPanel();
printPanel.Dock = DockStyle.Fill;
tabPrint.Controls.Add(printPanel);
printerSettings.formToCon();
logView = new LogView();
logView.Dock = DockStyle.Fill;
splitLog.Panel2.Controls.Add(logView);
skeinforge = new Skeinforge();
PrinterChanged(printerSettings.currentPrinterKey, true);
printerSettings.eventPrinterChanged += PrinterChanged;
// GCode print preview
threedview = new ThreeDControl();
threedview.Dock = DockStyle.Fill;
tabPage3DView.Controls.Add(threedview);
printPreview = new ThreeDView();
// printPreview.Dock = DockStyle.Fill;
// splitContainerPrinterGraphic.Panel2.Controls.Add(printPreview);
printPreview.SetEditor(false);
printPreview.autoupdateable = true;
printVisual = new GCodeVisual(conn.analyzer);
printVisual.liveView = true;
printPreview.models.AddLast(printVisual);
basicTitle = Text;
jobPreview = new ThreeDView();
// jobPreview.Dock = DockStyle.Fill;
// splitJob.Panel2.Controls.Add(jobPreview);
jobPreview.SetEditor(false);
jobPreview.models.AddLast(jobVisual);
editor.contentChangedEvent += JobPreview;
editor.commands = new Commands();
editor.commands.Read("default", "en");
UpdateHistory();
UpdateConnections();
Main.slic3r = new Slic3r();
slicer = new Slicer();
//toolShowLog_CheckedChanged(null, null);
updateShowFilament();
assign3DView();
history = new TemperatureHistory();
tempView = new TemperatureView();
tempView.Dock = DockStyle.Fill;
tabPageTemp.Controls.Add(tempView);
if (IsMono)
showWorkdirectoryToolStripMenuItem.Visible = false;
new SoundConfig();
stlComposer1.buttonSlice.Text = Trans.T1("L_SLICE_WITH", slicer.SlicerName);
// Customizations
if(Custom.GetBool("removeTestgenerator",false)) {
internalSlicingParameterToolStripMenuItem.Visible = false;
testCaseGeneratorToolStripMenuItem.Visible = false;
}
string titleAdd = Custom.GetString("titleAddition", "");
if (titleAdd.Length > 0)
{
int p = basicTitle.IndexOf(' ');
basicTitle = basicTitle.Substring(0, p) + titleAdd + basicTitle.Substring(p);
Text = basicTitle;
}
slicerPanel.UpdateSelection();
if (Custom.GetBool("removeUpdates", false))
checkForUpdatesToolStripMenuItem.Visible = false;
else
RHUpdater.checkForUpdates(true);
UpdateToolbarSize();
// Add languages
foreach (Translation t in trans.translations.Values)
{
ToolStripMenuItem item = new ToolStripMenuItem(t.language,null, languageSelected);
item.Tag = t;
languageToolStripMenuItem.DropDownItems.Add(item);
}
languageChanged += translate;
translate();
toolAction.Text = Trans.T("L_IDLE");
toolConnection.Text = Trans.T("L_DISCONNECTED");
}
