// this method adds constraints singly and does not assume that they form a contour
// If you are trying to add a "series" or edges (or "contour"), use AddHole instead.
public bool AddConstraints(List <TriangulationConstraint> constraints)
{
if (constraints == null || constraints.Count < 1)
{
return(false);
}
bool bOK = true;
foreach (TriangulationConstraint tc in constraints)
{
if (ConstrainPointToBounds(tc.P) || ConstrainPointToBounds(tc.Q))
{
tc.CalculateContraintCode();
}
TriangulationConstraint tcTmp = null;
if (!mConstraintMap.TryGetValue(tc.ConstraintCode, out tcTmp))
{
tcTmp = tc;
bOK = AddConstraint(tcTmp) && bOK;
}
}
return(bOK);
}
public ConstrainedPointSet(List<TriangulationPoint> bounds, int[] indices)
: base(bounds)
{
AddBoundaryConstraints ();
List<TriangulationConstraint> l = new List<TriangulationConstraint> ();
for (int i = 0; i < indices.Length; i += 2) {
TriangulationConstraint tc = new TriangulationConstraint (bounds [i], bounds [i + 1]);
l.Add (tc);
}
AddConstraints (l);
}
public ConstrainedPointSet(List <TriangulationPoint> bounds, int[] indices)
: base(bounds)
{
AddBoundaryConstraints();
List <TriangulationConstraint> l = new List <TriangulationConstraint>();
for (int i = 0; i < indices.Length; i += 2)
{
TriangulationConstraint tc = new TriangulationConstraint(bounds[i], bounds[i + 1]);
l.Add(tc);
}
AddConstraints(l);
}
public override void Prepare(TriangulationContext tcx)
{
if (!Initialize())
{
return;
}
base.Prepare(tcx);
Dictionary <uint, TriangulationConstraint> .Enumerator it = mConstraintMap.GetEnumerator();
while (it.MoveNext())
{
TriangulationConstraint tc = it.Current.Value;
tcx.NewConstraint(tc.P, tc.Q);
}
}
public bool AddConstraint(TriangulationConstraint tc)
{
if (tc == null || tc.P == null || tc.Q == null)
{
return(false);
}
// If we already have this constraint, then there's nothing to do. Since we already have
// a valid constraint in the map with the same ConstraintCode, then we're guaranteed that
// the points are also valid (and have the same coordinates as the ones being passed in with
// this constrain). Return true to indicate that we successfully "added" the constraint
if (mConstraintMap.ContainsKey(tc.ConstraintCode))
{
return(true);
}
// Make sure the constraint is not using points that are duplicates of ones already stored
// If it is, replace the Constraint Points with the points already stored.
TriangulationPoint p;
if (TryGetPoint(tc.P.X, tc.P.Y, out p))
{
tc.P = p;
}
else
{
Add(tc.P);
}
if (TryGetPoint(tc.Q.X, tc.Q.Y, out p))
{
tc.Q = p;
}
else
{
Add(tc.Q);
}
mConstraintMap.Add(tc.ConstraintCode, tc);
return(true);
}
protected void AddBoundaryConstraints()
{
TriangulationPoint ptLL = null;
TriangulationPoint ptLR = null;
TriangulationPoint ptUR = null;
TriangulationPoint ptUL = null;
if (!TryGetPoint(MinX, MinY, out ptLL))
{
ptLL = new TriangulationPoint(MinX, MinY);
Add(ptLL);
}
if (!TryGetPoint(MaxX, MinY, out ptLR))
{
ptLR = new TriangulationPoint(MaxX, MinY);
Add(ptLR);
}
if (!TryGetPoint(MaxX, MaxY, out ptUR))
{
ptUR = new TriangulationPoint(MaxX, MaxY);
Add(ptUR);
}
if (!TryGetPoint(MinX, MaxY, out ptUL))
{
ptUL = new TriangulationPoint(MinX, MaxY);
Add(ptUL);
}
TriangulationConstraint tcLLtoLR = new TriangulationConstraint(ptLL, ptLR);
AddConstraint(tcLLtoLR);
TriangulationConstraint tcLRtoUR = new TriangulationConstraint(ptLR, ptUR);
AddConstraint(tcLRtoUR);
TriangulationConstraint tcURtoUL = new TriangulationConstraint(ptUR, ptUL);
AddConstraint(tcURtoUL);
TriangulationConstraint tcULtoLL = new TriangulationConstraint(ptUL, ptLL);
AddConstraint(tcULtoLL);
}
public void CalculateContraintCode()
{
mContraintCode = TriangulationConstraint.CalculateContraintCode(P, Q);
}
protected void AddBoundaryConstraints()
{
TriangulationPoint ptLL = null;
TriangulationPoint ptLR = null;
TriangulationPoint ptUR = null;
TriangulationPoint ptUL = null;
if (!TryGetPoint(MinX, MinY, out ptLL))
{
ptLL = new TriangulationPoint(MinX, MinY);
Add(ptLL);
}
if (!TryGetPoint(MaxX, MinY, out ptLR))
{
ptLR = new TriangulationPoint(MaxX, MinY);
Add(ptLR);
}
if (!TryGetPoint(MaxX, MaxY, out ptUR))
{
ptUR = new TriangulationPoint(MaxX, MaxY);
Add(ptUR);
}
if (!TryGetPoint(MinX, MaxY, out ptUL))
{
ptUL = new TriangulationPoint(MinX, MaxY);
Add(ptUL);
}
TriangulationConstraint tcLLtoLR = new TriangulationConstraint(ptLL, ptLR);
AddConstraint(tcLLtoLR);
TriangulationConstraint tcLRtoUR = new TriangulationConstraint(ptLR, ptUR);
AddConstraint(tcLRtoUR);
TriangulationConstraint tcURtoUL = new TriangulationConstraint(ptUR, ptUL);
AddConstraint(tcURtoUL);
TriangulationConstraint tcULtoLL = new TriangulationConstraint(ptUL, ptLL);
AddConstraint(tcULtoLL);
}
public bool TryGetConstraint(uint constraintCode, out TriangulationConstraint tc)
{
return mConstraintMap.TryGetValue(constraintCode, out tc);
}
public bool AddConstraint(TriangulationConstraint tc)
{
if (tc == null || tc.P == null || tc.Q == null)
{
return false;
}
// If we already have this constraint, then there's nothing to do. Since we already have
// a valid constraint in the map with the same ConstraintCode, then we're guaranteed that
// the points are also valid (and have the same coordinates as the ones being passed in with
// this constrain). Return true to indicate that we successfully "added" the constraint
if (mConstraintMap.ContainsKey(tc.ConstraintCode))
{
return true;
}
// Make sure the constraint is not using points that are duplicates of ones already stored
// If it is, replace the Constraint Points with the points already stored.
TriangulationPoint p;
if (TryGetPoint(tc.P.X, tc.P.Y, out p))
{
tc.P = p;
}
else
{
Add(tc.P);
}
if (TryGetPoint(tc.Q.X, tc.Q.Y, out p))
{
tc.Q = p;
}
else
{
Add(tc.Q);
}
mConstraintMap.Add(tc.ConstraintCode, tc);
return true;
}
// Assumes that points being passed in the list are connected and form a polygon.
// Note that some error checking is done for robustness, but for the most part,
// we have to rely on the user to feed us "correct" data
public bool AddHole(List<TriangulationPoint> points, string name)
{
if (points == null)
{
return false;
}
//// split our self-intersection sections into their own lists
List<Contour> pts = new List<Contour>();
int listIdx = 0;
{
Contour c = new Contour(this, points, WindingOrderType.Unknown);
pts.Add(c);
// only constrain the points if we actually HAVE a bounding rect
if (mPoints.Count > 1)
{
// constrain the points to bounding rect
int numPoints = pts[listIdx].Count;
for (int i = 0; i < numPoints; ++i)
{
ConstrainPointToBounds(pts[listIdx][i]);
}
}
}
while (listIdx < pts.Count)
{
// simple sanity checking - remove duplicate coincident points before
// we check the polygon: fast, simple algorithm that eliminate lots of problems
// that only more expensive checks will find
pts[listIdx].RemoveDuplicateNeighborPoints();
pts[listIdx].WindingOrder = Point2DList.WindingOrderType.Default;
bool bListOK = true;
Point2DList.PolygonError err = pts[listIdx].CheckPolygon();
while (bListOK && err != PolygonError.None)
{
if ((err & PolygonError.NotEnoughVertices) == PolygonError.NotEnoughVertices)
{
bListOK = false;
continue;
}
if ((err & PolygonError.NotSimple) == PolygonError.NotSimple)
{
// split the polygons, remove the current list and add the resulting list to the end
//List<Point2DList> l = TriangulationUtil.SplitSelfIntersectingPolygon(pts[listIdx], pts[listIdx].Epsilon);
List<Point2DList> l = PolygonUtil.SplitComplexPolygon(pts[listIdx], pts[listIdx].Epsilon);
pts.RemoveAt(listIdx);
foreach (Point2DList newList in l)
{
Contour c = new Contour(this);
c.AddRange(newList);
pts.Add(c);
}
err = pts[listIdx].CheckPolygon();
continue;
}
if ((err & PolygonError.Degenerate) == PolygonError.Degenerate)
{
pts[listIdx].Simplify(this.Epsilon);
err = pts[listIdx].CheckPolygon();
continue;
//err &= ~(PolygonError.Degenerate);
//if (pts[listIdx].Count < 3)
//{
// err |= PolygonError.NotEnoughVertices;
// bListOK = false;
// continue;
//}
}
if ((err & PolygonError.AreaTooSmall) == PolygonError.AreaTooSmall ||
(err & PolygonError.SidesTooCloseToParallel) == PolygonError.SidesTooCloseToParallel ||
(err & PolygonError.TooThin) == PolygonError.TooThin ||
(err & PolygonError.Unknown) == PolygonError.Unknown)
{
bListOK = false;
continue;
}
// non-convex polygons are ok
//if ((err & PolygonError.NotConvex) == PolygonError.NotConvex)
//{
//}
}
if (!bListOK && pts[listIdx].Count != 2)
{
pts.RemoveAt(listIdx);
}
else
{
++listIdx;
}
}
bool bOK = true;
listIdx = 0;
while (listIdx < pts.Count)
{
int numPoints = pts[listIdx].Count;
if (numPoints < 2)
{
// should not be possible by this point...
++listIdx;
bOK = false;
continue;
}
else if (numPoints == 2)
{
uint constraintCode = TriangulationConstraint.CalculateContraintCode(pts[listIdx][0], pts[listIdx][1]);
TriangulationConstraint tc = null;
if (!mConstraintMap.TryGetValue(constraintCode, out tc))
{
tc = new TriangulationConstraint(pts[listIdx][0], pts[listIdx][1]);
AddConstraint(tc);
}
}
else
{
Contour ph = new Contour(this, pts[listIdx], Point2DList.WindingOrderType.Unknown);
ph.WindingOrder = Point2DList.WindingOrderType.Default;
ph.Name = name + ":" + listIdx.ToString();
mHoles.Add(ph);
}
++listIdx;
}
return bOK;
}
public static void InitializeHoles(List <Contour> holes, ITriangulatable parent, ConstrainedPointSet cps)
{
int numHoles = holes.Count;
int holeIdx = 0;
// pass 1 - remove duplicates
while (holeIdx < numHoles)
{
int hole2Idx = holeIdx + 1;
while (hole2Idx < numHoles)
{
bool bSamePolygon = PolygonUtil.PolygonsAreSame2D(holes[holeIdx], holes[hole2Idx]);
if (bSamePolygon)
{
// remove one of them
holes.RemoveAt(hole2Idx);
--numHoles;
}
else
{
++hole2Idx;
}
}
++holeIdx;
}
// pass 2: Intersections and Containment
holeIdx = 0;
while (holeIdx < numHoles)
{
bool bIncrementHoleIdx = true;
int hole2Idx = holeIdx + 1;
while (hole2Idx < numHoles)
{
if (PolygonUtil.PolygonContainsPolygon(holes[holeIdx], holes[holeIdx].Bounds, holes[hole2Idx], holes[hole2Idx].Bounds, false))
{
holes[holeIdx].AddHole(holes[hole2Idx]);
holes.RemoveAt(hole2Idx);
--numHoles;
}
else if (PolygonUtil.PolygonContainsPolygon(holes[hole2Idx], holes[hole2Idx].Bounds, holes[holeIdx], holes[holeIdx].Bounds, false))
{
holes[hole2Idx].AddHole(holes[holeIdx]);
holes.RemoveAt(holeIdx);
--numHoles;
bIncrementHoleIdx = false;
break;
}
else
{
bool bIntersect = PolygonUtil.PolygonsIntersect2D(holes[holeIdx], holes[holeIdx].Bounds, holes[hole2Idx], holes[hole2Idx].Bounds);
if (bIntersect)
{
// this is actually an error condition
// fix by merging hole1 and hole2 into hole1 (including the holes inside hole2!) and delete hole2
// Then, because hole1 is now changed, restart it's check.
PolygonOperationContext ctx = new PolygonOperationContext();
if (!ctx.Init(PolygonUtil.PolyOperation.Union | PolygonUtil.PolyOperation.Intersect, holes[holeIdx], holes[hole2Idx]))
{
if (ctx.mError == PolygonUtil.PolyUnionError.Poly1InsidePoly2)
{
holes[hole2Idx].AddHole(holes[holeIdx]);
holes.RemoveAt(holeIdx);
--numHoles;
bIncrementHoleIdx = false;
break;
}
else
{
throw new Exception("PolygonOperationContext.Init had an error during initialization");
}
}
PolygonUtil.PolyUnionError pue = PolygonUtil.PolygonOperation(ctx);
if (pue == PolygonUtil.PolyUnionError.None)
{
Point2DList union = ctx.Union;
Point2DList intersection = ctx.Intersect;
// create a new contour for the union
Contour c = new Contour(parent);
c.AddRange(union);
c.Name = "(" + holes[holeIdx].Name + " UNION " + holes[hole2Idx].Name + ")";
c.WindingOrder = Point2DList.WindingOrderType.Default;
// add children from both of the merged contours
int numChildHoles = holes[holeIdx].GetNumHoles();
for (int i = 0; i < numChildHoles; ++i)
{
c.AddHole(holes[holeIdx].GetHole(i));
}
numChildHoles = holes[hole2Idx].GetNumHoles();
for (int i = 0; i < numChildHoles; ++i)
{
c.AddHole(holes[hole2Idx].GetHole(i));
}
// make sure we preserve the contours of the intersection
Contour cInt = new Contour(c);
cInt.AddRange(intersection);
cInt.Name = "(" + holes[holeIdx].Name + " INTERSECT " + holes[hole2Idx].Name + ")";
cInt.WindingOrder = Point2DList.WindingOrderType.Default;
c.AddHole(cInt);
// replace the current contour with the merged contour
holes[holeIdx] = c;
// toss the second contour
holes.RemoveAt(hole2Idx);
--numHoles;
// current hole is "examined", so move to the next one
hole2Idx = holeIdx + 1;
}
else
{
throw new Exception("PolygonOperation had an error!");
}
}
else
{
++hole2Idx;
}
}
}
if (bIncrementHoleIdx)
{
++holeIdx;
}
}
numHoles = holes.Count;
holeIdx = 0;
while (holeIdx < numHoles)
{
int numPoints = holes[holeIdx].Count;
for (int i = 0; i < numPoints; ++i)
{
int j = holes[holeIdx].NextIndex(i);
uint constraintCode = TriangulationConstraint.CalculateContraintCode(holes[holeIdx][i], holes[holeIdx][j]);
TriangulationConstraint tc = null;
if (!cps.TryGetConstraint(constraintCode, out tc))
{
tc = new TriangulationConstraint(holes[holeIdx][i], holes[holeIdx][j]);
cps.AddConstraint(tc);
}
// replace the points in the holes with valid points
if (holes[holeIdx][i].VertexCode == tc.P.VertexCode)
{
holes[holeIdx][i] = tc.P;
}
else if (holes[holeIdx][j].VertexCode == tc.P.VertexCode)
{
holes[holeIdx][j] = tc.P;
}
if (holes[holeIdx][i].VertexCode == tc.Q.VertexCode)
{
holes[holeIdx][i] = tc.Q;
}
else if (holes[holeIdx][j].VertexCode == tc.Q.VertexCode)
{
holes[holeIdx][j] = tc.Q;
}
}
++holeIdx;
}
}
public bool TryGetConstraint(uint constraintCode, out TriangulationConstraint tc)
{
return(mConstraintMap.TryGetValue(constraintCode, out tc));
}
// Assumes that points being passed in the list are connected and form a polygon.
// Note that some error checking is done for robustness, but for the most part,
// we have to rely on the user to feed us "correct" data
public bool AddHole(List <TriangulationPoint> points, string name)
{
if (points == null)
{
return(false);
}
//// split our self-intersection sections into their own lists
List <Contour> pts = new List <Contour>();
int listIdx = 0;
{
Contour c = new Contour(this, points, WindingOrderType.Unknown);
pts.Add(c);
// only constrain the points if we actually HAVE a bounding rect
if (mPoints.Count > 1)
{
// constrain the points to bounding rect
int numPoints = pts[listIdx].Count;
for (int i = 0; i < numPoints; ++i)
{
ConstrainPointToBounds(pts[listIdx][i]);
}
}
}
while (listIdx < pts.Count)
{
// simple sanity checking - remove duplicate coincident points before
// we check the polygon: fast, simple algorithm that eliminate lots of problems
// that only more expensive checks will find
pts[listIdx].RemoveDuplicateNeighborPoints();
pts[listIdx].WindingOrder = Point2DList.WindingOrderType.Default;
bool bListOK = true;
Point2DList.PolygonError err = pts[listIdx].CheckPolygon();
while (bListOK && err != PolygonError.None)
{
if ((err & PolygonError.NotEnoughVertices) == PolygonError.NotEnoughVertices)
{
bListOK = false;
continue;
}
if ((err & PolygonError.NotSimple) == PolygonError.NotSimple)
{
// split the polygons, remove the current list and add the resulting list to the end
//List<Point2DList> l = TriangulationUtil.SplitSelfIntersectingPolygon(pts[listIdx], pts[listIdx].Epsilon);
List <Point2DList> l = PolygonUtil.SplitComplexPolygon(pts[listIdx], pts[listIdx].Epsilon);
pts.RemoveAt(listIdx);
foreach (Point2DList newList in l)
{
Contour c = new Contour(this);
c.AddRange(newList);
pts.Add(c);
}
err = pts[listIdx].CheckPolygon();
continue;
}
if ((err & PolygonError.Degenerate) == PolygonError.Degenerate)
{
pts[listIdx].Simplify(this.Epsilon);
err = pts[listIdx].CheckPolygon();
continue;
//err &= ~(PolygonError.Degenerate);
//if (pts[listIdx].Count < 3)
//{
// err |= PolygonError.NotEnoughVertices;
// bListOK = false;
// continue;
//}
}
if ((err & PolygonError.AreaTooSmall) == PolygonError.AreaTooSmall ||
(err & PolygonError.SidesTooCloseToParallel) == PolygonError.SidesTooCloseToParallel ||
(err & PolygonError.TooThin) == PolygonError.TooThin ||
(err & PolygonError.Unknown) == PolygonError.Unknown)
{
bListOK = false;
continue;
}
// non-convex polygons are ok
//if ((err & PolygonError.NotConvex) == PolygonError.NotConvex)
//{
//}
}
if (!bListOK && pts[listIdx].Count != 2)
{
pts.RemoveAt(listIdx);
}
else
{
++listIdx;
}
}
bool bOK = true;
listIdx = 0;
while (listIdx < pts.Count)
{
int numPoints = pts[listIdx].Count;
if (numPoints < 2)
{
// should not be possible by this point...
++listIdx;
bOK = false;
continue;
}
else if (numPoints == 2)
{
uint constraintCode = TriangulationConstraint.CalculateContraintCode(pts[listIdx][0], pts[listIdx][1]);
TriangulationConstraint tc = null;
if (!mConstraintMap.TryGetValue(constraintCode, out tc))
{
tc = new TriangulationConstraint(pts[listIdx][0], pts[listIdx][1]);
AddConstraint(tc);
}
}
else
{
Contour ph = new Contour(this, pts[listIdx], Point2DList.WindingOrderType.Unknown);
ph.WindingOrder = Point2DList.WindingOrderType.Default;
ph.Name = name + ":" + listIdx.ToString();
mHoles.Add(ph);
}
++listIdx;
}
return(bOK);
}
