/// <summary>
/// Sets this input to reflect the provided data object.
/// </summary>
/// <param name="data">Data.</param>
virtual protected void SetInputData(StandardInputData data)
{
enableController = data.enableController;
enableKeyboard = data.enableKeyboard;
horizontalAxisName = data.horizontalAxisName;
reverseHorizontalAxis = data.reverseHorizontalAxis;
digitalHorizontalThreshold = data.digitalHorizontalThreshold;
verticalAxisName = data.verticalAxisName;
reverseVerticalAxis = data.reverseVerticalAxis;
digitalVerticalThreshold = data.digitalVerticalThreshold;
altHorizontalAxisName = data.altHorizontalAxisName;
reverseAltHorizontalAxis = data.reverseAltHorizontalAxis;
digitalAltHorizontalThreshold = data.digitalAltHorizontalThreshold;
altVerticalAxisName = data.altVerticalAxisName;
reverseAltVerticalAxis = data.reverseAltVerticalAxis;
digitalAltVerticalThreshold = data.digitalAltVerticalThreshold;
right = data.right;
left = data.left;
up = data.up;
down = data.down;
jump = data.jump;
run = data.run;
pause = data.pause;
actionButtons = new KeyCode[data.actionButtons.Length];
for (int i = 0; i < data.actionButtons.Length; i++)
{
actionButtons[i] = data.actionButtons[i];
}
}
public static void SaveToFile(string fullPath, StandardInputData data)
{
if (fullPath.Length != 0)
{
using (StreamWriter writer = new StreamWriter(fullPath))
{
XmlSerializer serializer = new XmlSerializer(typeof(StandardInputData));
serializer.Serialize(writer, data);
}
}
else
{
Debug.LogError("Tried to save an input file but no input path was specified.");
}
}
/// <summary>
/// Loads input data from file.
/// </summary>
/// <returns>The loaded data or null if data not loaded.</returns>
/// <param name="fullPath">Full path.</param>
public static StandardInputData LoadFromFile(string fullPath)
{
if (fullPath.Length != 0)
{
using (StreamReader reader = new StreamReader(fullPath))
{
XmlSerializer serializer = new XmlSerializer(typeof(StandardInputData));
StandardInputData inputData = (StandardInputData)serializer.Deserialize(reader);
return(inputData);
}
}
else
{
Debug.LogError("Tried to load an input file but the file path was empty");
}
return(null);
}
/// <summary>
/// Loads input data from Unity resource folder
/// </summary>
/// <returns>The loaded data or null if data not loaded.</returns>
/// <param name="resourceName">Resource name.</param>
public static StandardInputData LoadFromResource(string resourceName)
{
TextAsset asset = Resources.Load(resourceName) as TextAsset;
if (asset != null)
{
using (Stream stream = new MemoryStream(asset.bytes)){
XmlSerializer serializer = new XmlSerializer(typeof(StandardInputData));
StandardInputData inputData = (StandardInputData)serializer.Deserialize(stream);
return(inputData);
}
}
else
{
Debug.LogError("Tried to load an input file but the resource named " + resourceName + " was not found:");
}
return(null);
}
/// <summary>
/// Sets this input to reflect the provided data object.
/// </summary>
/// <param name="data">Data.</param>
virtual public StandardInputData GetInputData()
{
StandardInputData data = new StandardInputData();
data.enableController = enableController;
data.enableKeyboard = enableKeyboard;
data.horizontalAxisName = horizontalAxisName;
data.reverseHorizontalAxis = reverseHorizontalAxis;
data.digitalHorizontalThreshold = digitalHorizontalThreshold;
data.verticalAxisName = verticalAxisName;
data.reverseVerticalAxis = reverseVerticalAxis;
data.digitalVerticalThreshold = digitalVerticalThreshold;
data.altHorizontalAxisName = altHorizontalAxisName;
data.reverseAltHorizontalAxis = reverseAltHorizontalAxis;
data.digitalAltHorizontalThreshold = digitalAltHorizontalThreshold;
data.altVerticalAxisName = altVerticalAxisName;
data.reverseAltVerticalAxis = reverseAltVerticalAxis;
data.digitalAltVerticalThreshold = digitalAltVerticalThreshold;
data.right = right;
data.left = left;
data.up = up;
data.down = down;
data.jump = jump;
data.run = run;
data.pause = pause;
// Assume there are always 8 action buttons (no harm if they aren't used). If we don't do this
// saving data with less buttons can cause issues which aren't immediately obvious.
data.actionButtons = new KeyCode[8];
for (int i = 0; i < data.actionButtons.Length; i++)
{
if (i < actionButtons.Length)
{
data.actionButtons[i] = actionButtons[i];
}
else
{
data.actionButtons[i] = KeyCode.None;
}
}
return(data);
}
/// <summary>
/// Saves the input data.
/// </summary>
/// <returns><c>true</c>, if input data was saved, <c>false</c> otherwise.</returns>
/// <param name="dataName">Data name.</param>
virtual public bool SaveInputData(string dataName)
{
string prefsName = SavedPreferencePrefix + dataName;
System.Xml.Serialization.XmlSerializer serializer = new System.Xml.Serialization.XmlSerializer(typeof(StandardInputData));
StandardInputData dataToSave = GetInputData();
try
{
using (var stream = new StringWriter()) {
serializer.Serialize(stream, dataToSave);
PlayerPrefs.SetString(prefsName, stream.ToString());
}
}
catch (System.IO.IOException e)
{
Debug.LogError("Error saving input data:" + e.Message);
return(false);
}
return(true);
}
/// <summary>
/// Loads the provided input data.
/// </summary>
/// <param name="data">Data to load.</param>
override public void LoadInputData(StandardInputData data)
{
SetInputData(data);
}
/// <summary>
/// Loads the provided input data.
/// </summary>
/// <param name="data">Data to load.</param>
override public void LoadInputData(StandardInputData data)
{
Debug.LogError("UnityInput does not allow for in game control configuration.");
}
public override void LoadInputData(StandardInputData data)
{
Debug.LogWarning("You can't configure a disabled input");
}
/// <summary>
/// Loads the input data for the given data name.
/// </summary>
/// <param name="dataName">Data to load.</param>
/// <param name="data">Data.</param>
override public void LoadInputData(StandardInputData data)
{
Debug.LogWarning("BufferedInput should not be updated directly, update the underlying input implementation.");
}
public static void SaveToFile(string fullPath, StandardInputData data)
{
if (fullPath.Length != 0) {
using (StreamWriter writer = new StreamWriter(fullPath))
{
XmlSerializer serializer = new XmlSerializer(typeof(StandardInputData));
serializer.Serialize(writer, data);
}
}
else
{
Debug.LogError ("Tried to save an input file but no input path was specified.");
}
}
/// <summary>
/// Sets this input to reflect the provided data object.
/// </summary>
/// <param name="data">Data.</param>
public virtual StandardInputData GetInputData()
{
StandardInputData data = new StandardInputData ();
data.enableController = enableController;
data.enableKeyboard = enableKeyboard;
data.horizontalAxisName = horizontalAxisName;
data.reverseHorizontalAxis = reverseHorizontalAxis;
data.digitalHorizontalThreshold = digitalHorizontalThreshold;
data.verticalAxisName = verticalAxisName;
data.reverseVerticalAxis = reverseVerticalAxis;
data.digitalVerticalThreshold = digitalVerticalThreshold;
data.altHorizontalAxisName = altHorizontalAxisName;
data.reverseAltHorizontalAxis = reverseAltHorizontalAxis;
data.digitalAltHorizontalThreshold = digitalAltHorizontalThreshold;
data.altVerticalAxisName = altVerticalAxisName;
data.reverseAltVerticalAxis = reverseAltVerticalAxis;
data.digitalAltVerticalThreshold = digitalAltVerticalThreshold;
data.right = right;
data.left = left;
data.up = up;
data.down = down;
data.jump = jump;
data.run = run;
data.pause = pause;
// Assume there are always 8 action buttons (no harm if they aren't used). If we don't do this
// saving data with less buttons can cause issues which aren't immediately obvious.
data.actionButtons = new KeyCode[8];
for (int i = 0; i < data.actionButtons.Length; i++)
{
if (i < actionButtons.Length) data.actionButtons[i] = actionButtons[i];
else data.actionButtons[i] = KeyCode.None;
}
return data;
}
/// <summary>
/// Loads the input data for the given data name. NOT AVAILABLE in MultiInput.
/// </summary>
/// <returns>true</returns>
/// <c>false</c>
/// <param name="dataName">Data to load.</param>
/// <param name="data">Data.</param>
public override void LoadInputData(StandardInputData data)
{
Debug.LogWarning("You cannot configure a MultiInput directly. Call this method on the wrapped inputs.");
}
/// <summary> /// Loads the provided input data. /// </summary> /// <param name="data">Data to load.</param> abstract public void LoadInputData(StandardInputData data);
/// <summary>
/// Loads the provided input data.
/// </summary>
/// <param name="data">Data to load.</param>
public override void LoadInputData(StandardInputData data)
{
Debug.LogError ("UnityInput does not allow for in game control configuration.");
}
/// <summary>
/// Loads the input data for the given data name.
/// </summary>
/// <param name="dataName">Data to load.</param>
/// <param name="data">Data.</param>
public override void LoadInputData(StandardInputData data)
{
Debug.LogWarning ("BufferedInput should not be updated directly, update the underlying input implementation.");
}
/// <summary>
/// Loads the provided input data.
/// </summary>
/// <param name="data">Data to load.</param>
public override void LoadInputData(StandardInputData data)
{
SetInputData (data);
}
/// <summary>
/// Sets this input to reflect the provided data object.
/// </summary>
/// <param name="data">Data.</param>
protected virtual void SetInputData(StandardInputData data)
{
enableController = data.enableController;
enableKeyboard = data.enableKeyboard;
horizontalAxisName = data.horizontalAxisName;
reverseHorizontalAxis = data.reverseHorizontalAxis;
digitalHorizontalThreshold = data.digitalHorizontalThreshold;
verticalAxisName = data.verticalAxisName;
reverseVerticalAxis = data.reverseVerticalAxis;
digitalVerticalThreshold = data.digitalVerticalThreshold;
altHorizontalAxisName = data.altHorizontalAxisName;
reverseAltHorizontalAxis = data.reverseAltHorizontalAxis;
digitalAltHorizontalThreshold = data.digitalAltHorizontalThreshold;
altVerticalAxisName = data.altVerticalAxisName;
reverseAltVerticalAxis = data.reverseAltVerticalAxis;
digitalAltVerticalThreshold = data.digitalAltVerticalThreshold;
right = data.right;
left = data.left;
up = data.up;
down = data.down;
jump = data.jump;
run = data.run;
pause = data.pause;
actionButtons = new KeyCode[data.actionButtons.Length];
for (int i = 0; i < data.actionButtons.Length; i++) actionButtons[i] = data.actionButtons[i];
}
/// <summary>
/// Draw the inspector GUI.
/// </summary>
public override void OnInspectorGUI()
{
myTarget = (StandardInput)target;
// Arguments to load
string newDataToLoad = EditorGUILayout.TextField(new GUIContent("Data To Load", "Data identifier for the inputs, should match the identifier in the configurable controls UI."), myTarget.dataToLoad);
if (myTarget.dataToLoad != newDataToLoad)
{
myTarget.dataToLoad = newDataToLoad;
EditorUtility.SetDirty(target);
}
GUILayout.BeginHorizontal();
if (GUILayout.Button("Load from File"))
{
string path = EditorUtility.OpenFilePanel("Load Input Settings", "", "xml");
if (path.Length > 0)
{
StandardInputData data = StandardInputData.LoadFromFile(path);
if (data != null)
{
myTarget.LoadInputData(data);
EditorUtility.SetDirty(target);
}
}
}
if (GUILayout.Button("Save to File"))
{
string path = EditorUtility.SaveFilePanel("Save Input Settings", "", "CustomInput", "xml");
if (path.Length > 0)
{
StandardInputData data = myTarget.GetInputData();
StandardInputData.SaveToFile(path, data);
}
}
GUILayout.EndHorizontal();
GUILayout.BeginHorizontal();
if (GUILayout.Button("Load from Preferencess"))
{
UIInputOverlay overlay = (UIInputOverlay)FindObjectOfType(typeof(UIInputOverlay));
if (overlay != null)
{
overlay.Show((Input)target);
}
myTarget.LoadInputData(myTarget.dataToLoad);
}
if (GUILayout.Button("Clear Preferencess"))
{
string prefsName = StandardInput.SavedPreferencePrefix + myTarget.dataToLoad;
PlayerPrefs.DeleteKey(prefsName);
}
GUILayout.EndHorizontal();
EditorGUILayout.HelpBox("Note that the defaults below are only applied if no PlayerPreference data has been set.", MessageType.Info);
// Defaults
showDefaults = EditorGUILayout.Foldout(showDefaults, "Default Controls");
if (showDefaults)
{
// GUILayout.Label("Controls", EditorStyles.boldLabel);
DrawDefaultInspector();
}
}
/// <summary> /// Loads the provided input data. /// </summary> /// <param name="data">Data to load.</param> public abstract void LoadInputData(StandardInputData data);
