/// <summary>
/// Writes a card, then reads it back and compares fields.
/// </summary>
public static void CycleStandard21(vCard card)
{
if (card == null)
throw new ArgumentNullException("cycle");
// Create a memory stream to hold the contents of the card.
MemoryStream stream = new MemoryStream();
StreamWriter textWriter = new StreamWriter(stream);
// Create a standard vCard writer and export the
// card data to the stream.
vCardStandardWriter writer = new vCardStandardWriter();
writer.Write(card, textWriter);
textWriter.Flush();
// Reset the stream (back to its beginning), then
// create a stream reader capable of reading text
// lines from the stream.
stream.Seek(0, SeekOrigin.Begin);
StreamReader streamReader = new StreamReader(stream);
vCardStandardReader standardReader = new vCardStandardReader();
vCard reloaded = standardReader.Read(streamReader);
Equals(card, reloaded);
}
public void CycleXPlanWithPhoto()
{
vCard card = new vCard(
new StreamReader(new MemoryStream(SampleCards.XPalmWithPhoto)));
Helper.CycleStandard(card);
}
public void ReadWriteProperty_Department()
{
vCard card = new vCard();
card.Department = "DOD";
Assert.AreEqual(
"DOD",
card.Department,
"The Department property is not working.");
}
/// <summary>
/// Writes the vCard to the specified filename.
/// </summary>
public virtual void Write(vCard card, string filename)
{
if (card == null)
throw new ArgumentNullException("card");
using (StreamWriter output = new StreamWriter(filename))
{
Write(card, output);
}
}
public void ReadWriteProperty_AdditionalNames()
{
// Make sure .AdditionalNames reads/writes
vCard card = new vCard();
card.AdditionalNames = "John";
Assert.AreEqual(
"John",
card.AdditionalNames,
"The AdditionalNames property is not working.");
}
public void CycleRfcAuthors()
{
using (StreamReader reader = new StreamReader(
new MemoryStream(SampleCards.RfcAuthors)))
{
vCard card1 = new vCard(reader);
vCard card2 = new vCard(reader);
Helper.CycleStandard(card1);
Helper.CycleStandard(card2);
}
}
public void ParseRfcAuthors()
{
using (StreamReader reader = new StreamReader(
new MemoryStream(SampleCards.RfcAuthors)))
{
vCard card1 = new vCard(reader);
vCard card2 = new vCard(reader);
_parseCard1(card1);
_parseCard2(card2);
}
}
public void ReadWriteProperty_BirthDate()
{
vCard card = new vCard();
card.BirthDate = DateTime.Parse("04/04/04");
Assert.AreEqual(
DateTime.Parse("04/04/04"),
card.BirthDate.Value,
"The BirthDate property was not set.");
card.BirthDate = null;
Assert.IsNull(
card.BirthDate,
"The BirthDate property was not set to null.");
}
/// <summary>
/// Executed when the Submit button is clicked.
/// </summary>
protected void SubmitButton_Click(object sender, EventArgs e)
{
vCard card = new vCard();
// Simple properties
card.AdditionalNames = AdditionalNames.Text;
card.FamilyName = FamilyName.Text;
card.GivenName = GivenName.Text;
card.NamePrefix = NamePrefix.Text;
card.NameSuffix = NameSuffix.Text;
card.Organization = Organization.Text;
card.Role = Role.Text;
card.Title = Title.Text;
// ---------------------------------------------------------------
// Email Addresses
// ---------------------------------------------------------------
// A vCard supports any number of email addresses.
if (!string.IsNullOrEmpty(WorkEmail.Text))
{
card.EmailAddresses.Add(
new vCardEmailAddress(WorkEmail.Text));
}
// ---------------------------------------------------------------
// Notes
// ---------------------------------------------------------------
// The vCard specification allows for multiple notes, although
// most applications seem to support a maximum of one note.
if (Note.Text.Length > 0)
{
card.Notes.Add(new vCardNote(Note.Text));
}
// ---------------------------------------------------------------
// Phones
// ---------------------------------------------------------------
//
// A vCard supports any number of telephones. Each telephone can
// have a different type (such as a video phone or a fax) and a
// purpose (e.g. a home number or a work number).
if (!string.IsNullOrEmpty(WorkPhone.Text))
{
card.Phones.Add(
new vCardPhone(WorkPhone.Text, vCardPhoneType.WorkVoice));
}
if (!string.IsNullOrEmpty(WorkFax.Text))
{
card.Phones.Add(
new vCardPhone(WorkFax.Text, vCardPhoneType.WorkFax));
}
// ---------------------------------------------------------------
// Web Sites
// ---------------------------------------------------------------
if (WorkWebSite.Text.Length > 0)
{
card.WebSites.Add(
new vCardWebSite(WorkWebSite.Text, vCardWebSiteType.Work));
}
// ---------------------------------------------------------------
// Nicknames
// ---------------------------------------------------------------
string[] nicklist = Nicknames.Text.Split(new char[] { ',' });
foreach (string nick in nicklist)
{
if (nick.Length > 0)
card.Nicknames.Add(nick);
}
// The vCard object has been populated. The rest of
// the code generates the vCard file format and exports
// it to the response stream.
Response.ContentType = "text/x-vcard";
// The "content-disposition" is a special HTTP header
// that tells the web browser how to interpreted the
// output. In this case, the browser is informed the
// content should be treated as an attachment with
// a default filename. This should cause the browser
// to display a dialog box to save the vCard (instead
// of displaying the vCard as inline text).
Response.AppendHeader(
"content-disposition", "attachment;filename=vCard.vcf");
vCardStandardWriter writer = new vCardStandardWriter();
writer.EmbedInternetImages = false;
writer.EmbedLocalImages = true;
writer.Options = vCardStandardWriterOptions.IgnoreCommas;
writer.Write(card, Response.Output);
Response.End();
}
/// <summary>
/// Builds the REV property.
/// </summary>
private void BuildProperties_REV(
vCardPropertyCollection properties,
vCard card)
{
if (card.RevisionDate.HasValue)
{
vCardProperty property =
new vCardProperty("REV", card.RevisionDate.Value.ToString());
properties.Add(property);
}
}
private void BuildProperties_PHOTO(
vCardPropertyCollection properties,
vCard card)
{
foreach(vCardPhoto photo in card.Photos)
{
if (photo.Url == null)
{
// This photo does not have a URL associated
// with it. Therefore a property can be
// generated only if the image data is loaded.
// Otherwise there is not enough information.
if (photo.IsLoaded)
{
properties.Add(
new vCardProperty("PHOTO", photo.GetBytes()));
}
}
else
{
// This photo has a URL associated with it. The
// PHOTO property can either be linked as an image
// or embedded, if desired.
bool doEmbedded =
photo.Url.IsFile ? this.embedLocalImages : this.embedInternetImages;
if(doEmbedded)
{
// According to the settings of the card writer,
// this linked image should be embedded into the
// vCard data. Attempt to fetch the data.
try
{
photo.Fetch();
}
catch
{
// An error was encountered. The image can
// still be written as a link, however.
doEmbedded = false;
}
}
// At this point, doEmbedded is true only if (a) the
// writer was configured to embed the image, and (b)
// the image was successfully downloaded.
if(doEmbedded)
{
properties.Add(
new vCardProperty("PHOTO", photo.GetBytes()));
}
else
{
vCardProperty uriPhotoProperty =
new vCardProperty("PHOTO");
// Set the VALUE property to indicate that
// the data for the photo is a URI.
uriPhotoProperty.Subproperties.Add("VALUE", "URI");
uriPhotoProperty.Value = photo.Url.ToString();
properties.Add(uriPhotoProperty);
}
}
}
}
/// <summary>
/// Builds the NOTE property.
/// </summary>
private void BuildProperties_NOTE(
vCardPropertyCollection properties,
vCard card)
{
foreach (vCardNote note in card.Notes)
{
if (!string.IsNullOrEmpty(note.Text))
{
vCardProperty property = new vCardProperty();
property.Name = "NOTE";
property.Value = note.Text;
if (!string.IsNullOrEmpty(note.Language))
{
property.Subproperties.Add("language", note.Language);
}
property.Subproperties.Add("ENCODING", "QUOTED-PRINTABLE");
properties.Add(property);
}
}
}
private void BuildProperties_NAME(
vCardPropertyCollection properties,
vCard card)
{
if (!string.IsNullOrEmpty(card.DisplayName))
{
vCardProperty property =
new vCardProperty("NAME", card.DisplayName);
properties.Add(property);
}
}
/// <summary>
/// Builds the BDAY property.
/// </summary>
private void BuildProperties_BDAY(
vCardPropertyCollection properties,
vCard card)
{
// The BDAY property indicates the birthdate
// of the person. The output format here is based on
// Microsoft Outlook, which writes the date as YYYMMDD.
if (card.BirthDate.HasValue)
{
vCardProperty property =
new vCardProperty("BDAY", card.BirthDate.Value);
properties.Add(property);
}
}
/// <summary>
/// Builds ADR properties.
/// </summary>
private void BuildProperties_ADR(
vCardPropertyCollection properties,
vCard card)
{
foreach (vCardDeliveryAddress address in card.DeliveryAddresses)
{
// Do not generate a postal address (ADR) property
// if the entire address is blank.
if (
(!string.IsNullOrEmpty(address.City)) ||
(!string.IsNullOrEmpty(address.Country)) ||
(!string.IsNullOrEmpty(address.PostalCode)) ||
(!string.IsNullOrEmpty(address.Region)) ||
(!string.IsNullOrEmpty(address.Street)))
{
// The ADR property contains the following
// subvalues in order. All are required:
//
// - Post office box
// - Extended address
// - Street address
// - Locality (e.g. city)
// - Region (e.g. province or state)
// - Postal code (e.g. ZIP code)
// - Country name
vCardValueCollection values = new vCardValueCollection(';');
values.Add(string.Empty);
values.Add(string.Empty);
values.Add(address.Street);
values.Add(address.City);
values.Add(address.Region);
values.Add(address.PostalCode);
values.Add(address.Country);
vCardProperty property =
new vCardProperty("ADR", values);
if (address.IsDomestic)
property.Subproperties.Add("DOM");
if (address.IsInternational)
property.Subproperties.Add("INTL");
if (address.IsParcel)
property.Subproperties.Add("PARCEL");
if (address.IsPostal)
property.Subproperties.Add("POSTAL");
if (address.IsHome)
property.Subproperties.Add("HOME");
if (address.IsWork)
property.Subproperties.Add("WORK");
properties.Add(property);
}
}
}
/// <summary>
/// Builds the MAILER property.
/// </summary>
private void BuildProperties_MAILER(
vCardPropertyCollection properties,
vCard card)
{
// The MAILER property indicates the software that
// generated the vCard. See section 2.4.3 of the
// vCard 2.1 specification. Support is not widespread.
if (!string.IsNullOrEmpty(card.Mailer))
{
vCardProperty property =
new vCardProperty("MAILER", card.Mailer);
properties.Add(property);
}
}
private void BuildProperties_N(
vCardPropertyCollection properties,
vCard card)
{
// The property has the following components: Family Name,
// Given Name, Additional Names, Name Prefix, and Name
// Suffix. Example:
//
// N:Pinch;David
// N:Pinch;David;John
//
// The N property is required (see section 3.1.2 of RFC 2426).
vCardValueCollection values = new vCardValueCollection(';');
values.Add(card.FamilyName);
values.Add(card.GivenName);
values.Add(card.AdditionalNames);
values.Add(card.NamePrefix);
values.Add(card.NameSuffix);
vCardProperty property = new vCardProperty("N", values);
properties.Add(property);
}
private void BuildProperties_CATEGORIES(
vCardPropertyCollection properties,
vCard card)
{
if (card.Categories.Count > 0)
{
vCardValueCollection values = new vCardValueCollection(',');
foreach (string category in card.Categories)
{
if (!string.IsNullOrEmpty(category))
values.Add(category);
}
properties.Add(
new vCardProperty("CATEGORIES", values));
}
}
/// <summary>
/// Builds the NICKNAME property.
/// </summary>
private void BuildProperties_NICKNAME(
vCardPropertyCollection properties,
vCard card)
{
// The NICKNAME property specifies the familiar name
// of the person, such as Jim. This is defined in
// section 3.1.3 of RFC 2426. Multiple names can
// be listed, separated by commas.
if (card.Nicknames.Count > 0)
{
// A NICKNAME property is a comma-separated
// list of values. Create a value list and
// add the nicknames collection to it.
vCardValueCollection values = new vCardValueCollection(',');
values.Add(card.Nicknames);
// Create the new properties with each name separated
// by a comma.
vCardProperty property =
new vCardProperty("NICKNAME", values);
properties.Add(property);
}
}
private void BuildProperties_CLASS(
vCardPropertyCollection properties,
vCard card)
{
vCardProperty property = new vCardProperty("CLASS");
switch (card.AccessClassification)
{
case vCardAccessClassification.Unknown:
// No value is written.
return;
case vCardAccessClassification.Confidential:
property.Value = "CONFIDENTIAL";
break;
case vCardAccessClassification.Private:
property.Value = "PRIVATE";
break;
case vCardAccessClassification.Public:
property.Value = "PUBLIC";
break;
default:
throw new NotSupportedException();
}
properties.Add(property);
}
/// <summary>
/// Builds the ORG property.
/// </summary>
private void BuildProperties_ORG(
vCardPropertyCollection properties,
vCard card)
{
// The ORG property specifies the name of the
// person's company or organization. Example:
//
// ORG:FairMetric LLC
if (!string.IsNullOrEmpty(card.Organization))
{
vCardProperty property =
new vCardProperty("ORG", card.Organization);
properties.Add(property);
}
}
/// <summary>
/// Builds EMAIL properties.
/// </summary>
private void BuildProperties_EMAIL(
vCardPropertyCollection properties,
vCard card)
{
// The EMAIL property contains an electronic
// mail address for the purpose. A vCard may contain
// as many email addresses as needed. The format also
// supports various vendors, such as CompuServe addresses
// and Internet SMTP addresses.
//
// EMAIL;INTERNET:[email protected]
foreach (vCardEmailAddress emailAddress in card.EmailAddresses)
{
vCardProperty property = new vCardProperty();
property.Name = "EMAIL";
property.Value = emailAddress.Address;
if (emailAddress.IsPreferred)
{
property.Subproperties.Add("PREF");
}
switch (emailAddress.EmailType)
{
case vCardEmailAddressType.Internet:
property.Subproperties.Add("INTERNET");
break;
case vCardEmailAddressType.AOL:
property.Subproperties.Add("AOL");
break;
case vCardEmailAddressType.AppleLink:
property.Subproperties.Add("AppleLink");
break;
case vCardEmailAddressType.AttMail:
property.Subproperties.Add("ATTMail");
break;
case vCardEmailAddressType.CompuServe:
property.Subproperties.Add("CIS");
break;
case vCardEmailAddressType.eWorld:
property.Subproperties.Add("eWorld");
break;
case vCardEmailAddressType.IBMMail:
property.Subproperties.Add("IBMMail");
break;
case vCardEmailAddressType.MCIMail:
property.Subproperties.Add("MCIMail");
break;
case vCardEmailAddressType.PowerShare:
property.Subproperties.Add("POWERSHARE");
break;
case vCardEmailAddressType.Prodigy:
property.Subproperties.Add("PRODIGY");
break;
case vCardEmailAddressType.Telex:
property.Subproperties.Add("TLX");
break;
case vCardEmailAddressType.X400:
property.Subproperties.Add("X400");
break;
default:
property.Subproperties.Add("INTERNET");
break;
}
properties.Add(property);
}
}
/// <summary>
/// Builds PRODID properties.
/// </summary>
private void BuildProperties_PRODID(
vCardPropertyCollection properties,
vCard card)
{
if (!string.IsNullOrEmpty(card.ProductId))
{
vCardProperty property = new vCardProperty();
property.Name = "PRODID";
property.Value = card.ProductId;
properties.Add(property);
}
}
private void BuildProperties_FN(
vCardPropertyCollection properties,
vCard card)
{
// The FN property indicates the formatted
// name of the person. This can be something
// like "John Smith".
if (!string.IsNullOrEmpty(card.FormattedName))
{
vCardProperty property =
new vCardProperty("FN", card.FormattedName);
properties.Add(property);
}
}
/// <summary>
/// Builds the ROLE property.
/// </summary>
private void BuildProperties_ROLE(
vCardPropertyCollection properties,
vCard card)
{
// The ROLE property identifies the role of
// the person at his/her organization.
if (!string.IsNullOrEmpty(card.Role))
{
vCardProperty property =
new vCardProperty("ROLE", card.Role);
properties.Add(property);
}
}
/// <summary>
/// Builds the GEO property.
/// </summary>
private void BuildProperties_GEO(
vCardPropertyCollection properties,
vCard card)
{
// The GEO properties contains the latitude and
// longitude of the person or company of the vCard.
if (card.Latitude.HasValue && card.Longitude.HasValue)
{
vCardProperty property = new vCardProperty();
property.Name = "GEO";
property.Value =
card.Latitude.ToString() + ";" + card.Longitude.ToString();
properties.Add(property);
}
}
// The following functions export a vCard and then re-read it back
// as a new vCard. All fields and collections are compared to ensure
// the full fidelity of the export/import process.
#region [ CycleStandard ]
public static void CycleStandard(vCard card)
{
CycleStandard21(card);
}
/// <summary>
/// Builds KEY properties.
/// </summary>
private void BuildProperties_KEY(
vCardPropertyCollection properties,
vCard card)
{
// A KEY field contains an embedded security certificate.
foreach (vCardCertificate certificate in card.Certificates)
{
vCardProperty property = new vCardProperty();
property.Name = "KEY";
property.Value = certificate.Data;
property.Subproperties.Add(certificate.KeyType);
properties.Add(property);
}
}
// The following functions compare two vCard-related objects.
#region [ Equals(vCard) ]
public static void Equals(vCard c1, vCard c2)
{
// Start by comparing the base fields.
Assert.AreEqual(
c1.AdditionalNames,
c2.AdditionalNames,
"AdditionalNames does not match.");
Assert.AreEqual(
c1.BirthDate,
c2.BirthDate,
"BirthDate does not match.");
Assert.AreEqual(
c1.DisplayName,
c2.DisplayName,
"DisplayName does not match.");
Assert.AreEqual(
c1.FamilyName,
c2.FamilyName,
"FamilyName does not match.");
Assert.AreEqual(
c1.FormattedName,
c2.FormattedName,
"FormattedName does not match.");
Assert.AreEqual(
c1.Gender,
c2.Gender,
"Gender does not match.");
Assert.AreEqual(
c1.GivenName,
c2.GivenName,
"GivenName does not match.");
Assert.AreEqual(
c1.Mailer,
c2.Mailer,
"Mailer does not match.");
Assert.AreEqual(
c1.NamePrefix,
c2.NamePrefix,
"NamePrefix does not match.");
Assert.AreEqual(
c1.NameSuffix,
c2.NameSuffix,
"NameSuffix does not match.");
Assert.AreEqual(
c1.Organization,
c2.Organization,
"Organization does not match.");
Assert.AreEqual(
c1.ProductId,
c2.ProductId,
"ProductId does not match.");
Assert.AreEqual(
c1.RevisionDate,
c2.RevisionDate,
"RevisionDate does not match.");
Assert.AreEqual(
c1.Role,
c2.Role,
"Role does not match.");
Assert.AreEqual(
c1.TimeZone,
c2.TimeZone,
"TimeZone does not match.");
Assert.AreEqual(
c1.Title,
c2.Title,
"Title does not match.");
Assert.AreEqual(
c1.ToString(),
c2.ToString(),
"ToString() does not match.");
Assert.AreEqual(
c1.UniqueId,
c2.UniqueId,
"UniqueId does not match.");
// Compare collections
Equals(
c1.Categories,
c2.Categories);
Equals(
c1.DeliveryAddresses,
c2.DeliveryAddresses);
Equals(
c1.DeliveryLabels,
c2.DeliveryLabels);
Equals(
c1.EmailAddresses,
c2.EmailAddresses);
Equals(
c1.Nicknames,
c2.Nicknames);
Equals(
c1.Notes,
c2.Notes);
Equals(
c1.Phones,
c2.Phones);
Equals(
c1.Photos,
c2.Photos);
Equals(
c1.Sources,
c2.Sources);
Equals(
c1.WebSites,
c2.WebSites);
}
private void BuildProperties_LABEL(
vCardPropertyCollection properties,
vCard card)
{
foreach (vCardDeliveryLabel label in card.DeliveryLabels)
{
if (label.Text.Length > 0)
{
vCardProperty property = new vCardProperty("LABEL", label.Text);
if (label.IsDomestic)
property.Subproperties.Add("DOM");
if(label.IsInternational)
property.Subproperties.Add("INTL");
if(label.IsParcel)
property.Subproperties.Add("PARCEL");
if(label.IsPostal)
property.Subproperties.Add("POSTAL");
if(label.IsHome)
property.Subproperties.Add("HOME");
if(label.IsWork)
property.Subproperties.Add("WORK");
// Give a hint to use QUOTED-PRINTABLE.
property.Subproperties.Add("ENCODING", "QUOTED-PRINTABLE");
properties.Add(property);
}
}
}
