private static double[] GetScaleValues(Inventor.Sheet CurrentSheet)
{
double [] ScaleValues;
string[] DrawingScales;
dynamic[] DynamScales;
Inventor.DrawingDocument DrawingDocument = (Inventor.DrawingDocument)CurrentSheet.Parent;
Inventor.DrawingStandardStyle DrawingStandardStyle = DrawingDocument.StylesManager.ActiveStandardStyle;
DynamScales = DrawingStandardStyle.PresetScales;
DrawingScales = new string[DynamScales.Length];
ScaleValues = new double[DynamScales.Length];
DrawingScales = DrawingStandardStyle.PresetScales;
DynamScales = null;
int i = 0;
foreach (string ScaleString in DrawingScales)
{
double ScalingValue = 1;
double ScalerValue = 1;
if (ScaleString != null)
{
int Delimitor = ScaleString.IndexOf(":");
ScalingValue = Convert.ToDouble(ScaleString.Substring(0, Delimitor));
ScalerValue = Convert.ToDouble(ScaleString.Substring(Delimitor + 1, ScaleString.Length - (Delimitor + 1)));
}
ScaleValues[i] = ScalingValue / ScalerValue;
i++;
}
return(ScaleValues);
}
// Create flat pattern drawing view API Sample
//Description
//This sample demonstrates the creation of a flat pattern base view in a drawing.
//Open a drawing document and run the sample.
public void AddFlatPatternDrawingView()
{
// Set a reference to the drawing document.
// This assumes a drawing document is active.
Inventor.DrawingDocument oDrawDoc = (Inventor.DrawingDocument)mInvApplication.ActiveDocument;
//Set a reference to the active sheet.
Inventor.Sheet oSheet = (Inventor.Sheet)oDrawDoc.ActiveSheet;
// Create a new NameValueMap object
Inventor.NameValueMap oBaseViewOptions = (Inventor.NameValueMap)mInvApplication.TransientObjects.CreateNameValueMap();
// Set the options to use when creating the base view.
oBaseViewOptions.Add("SheetMetalFoldedModel", false);
// Open the sheet metal document invisibly
Inventor._Document oModel = (Inventor._Document)mInvApplication.Documents.Open(@"C:\temp\SheetMetal.ipt", false);
// Create the placement point object.
Inventor.Point2d oPoint = default(Inventor.Point2d);
oPoint = mInvApplication.TransientGeometry.CreatePoint2d(25, 25);
// Create a base view.
Inventor.DrawingView oBaseView = (Inventor.DrawingView)oSheet.DrawingViews
.AddBaseView(oModel, oPoint, 1, Inventor.ViewOrientationTypeEnum.kDefaultViewOrientation,
Inventor.DrawingViewStyleEnum.kHiddenLineRemovedDrawingViewStyle, "", Type.Missing, oBaseViewOptions);
// Release reference of the invisibly open model
oModel.ReleaseReference();
}
private static void SetViewScale(Inventor.Sheet CurrentSheet, ref Inventor.DrawingView DrawingView)
{
double DrawingTitelBlockHeight = 5;
if (CurrentSheet.Size == Inventor.DrawingSheetSizeEnum.kA4DrawingSheetSize)
{
DrawingTitelBlockHeight = 5;
}
else if (CurrentSheet.Size == Inventor.DrawingSheetSizeEnum.kA3DrawingSheetSize)
{
DrawingTitelBlockHeight = 5;
}
double TargetViewGapWidth = 2;
double TargetViewGapHeight = 3;
double TargetViewWidth = CurrentSheet.Width - (2 * TargetViewGapWidth);
double TargetViewHeight = CurrentSheet.Height - ((2 * TargetViewGapHeight) + DrawingTitelBlockHeight);
double SheetWidth = CurrentSheet.Width;
double SheetHeight = CurrentSheet.Height;
double[] ViewCenter = new double[2];
string[] DrawingScales;
dynamic[] DynamScales;
Inventor.DrawingDocument DrawingDocument = (Inventor.DrawingDocument)CurrentSheet.Parent;
Inventor.DrawingStandardStyle DrawingStandardStyle = DrawingDocument.StylesManager.ActiveStandardStyle;
DynamScales = DrawingStandardStyle.PresetScales;
DrawingScales = new string[DynamScales.Length];
DrawingScales = DrawingStandardStyle.PresetScales;
DynamScales = null;
foreach (string ScaleString in DrawingScales)
{
double ScalingValue = 1;
double ScalerValue = 1;
double Scale = 0;
if (ScaleString != null)
{
int Delimitor = ScaleString.IndexOf(":");
ScalingValue = Convert.ToDouble(ScaleString.Substring(0, Delimitor));
ScalerValue = Convert.ToDouble(ScaleString.Substring(Delimitor + 1, ScaleString.Length - (Delimitor + 1)));
}
Scale = ScalingValue / ScalerValue;
}
for (int i = 0; i < 50; i++)
{
DrawingView.Scale = TargetViewWidth / DrawingView.Width * DrawingView.Scale;
if (DrawingView.Height > TargetViewHeight)
{
DrawingView.Scale = TargetViewHeight / DrawingView.Height * DrawingView.Scale;
}
}
}
private static Inventor.Point2d GetDrawingCenterPoint(Inventor.Sheet CurrentSheet, Inventor.TransientGeometry TransientGeometry)
{
Inventor.Point2d Point2d = null;
double DrawingTitelBlockHeight = 5;
if (CurrentSheet.Size == Inventor.DrawingSheetSizeEnum.kA4DrawingSheetSize)
{
DrawingTitelBlockHeight = 5;
}
else if (CurrentSheet.Size == Inventor.DrawingSheetSizeEnum.kA3DrawingSheetSize)
{
DrawingTitelBlockHeight = 5;
}
double[] ViewCenter = new double[2];
double SheetWidth = CurrentSheet.Width;
double SheetHeight = CurrentSheet.Height;
ViewCenter[0] = SheetWidth / 2;
ViewCenter[1] = (SheetHeight + DrawingTitelBlockHeight) / 2;
Point2d = TransientGeometry.CreatePoint2d(ViewCenter[0], ViewCenter[1]);
return(Point2d);
}
// Adding Representation views API Sample
//Description
//This sample demonstrates how to create a base view by specifying various representations.
//Before running this sample, make sure that the file
// C:\TempReps.iam exists (or change the path in the sample).
// The file must contain a level of detail representation named MyLODRep,
// a positional representation named MyPositionalRep and a design view representation named MyDesignViewRep.
public void AddBaseViewWithRepresentations()
{
// Set a reference to the drawing document.
// This assumes a drawing document is active.
Inventor.DrawingDocument oDrawDoc = (Inventor.DrawingDocument)mInvApplication.ActiveDocument;
//Set a reference to the active sheet.
Inventor.Sheet oSheet = (Inventor.Sheet)oDrawDoc.ActiveSheet;
// Create a new NameValueMap object
Inventor.NameValueMap oBaseViewOptions = (Inventor.NameValueMap)mInvApplication.TransientObjects.CreateNameValueMap();
// Set the representations to use when creating the base view.
oBaseViewOptions.Add("PositionalRepresentation", "MyPositionalRep");
oBaseViewOptions.Add("DesignViewRepresentation", "MyDesignViewRep");
oBaseViewOptions.Add("DesignViewAssociative", true);
// Open the model document (corresponding to the "MyLODRep" representation).
string strFullDocumentName = null;
strFullDocumentName = mInvApplication.FileManager.GetFullDocumentName(@"C:\tempreps.iam", "MyLODRep");
Inventor._Document oModel = (Inventor._Document)mInvApplication.Documents.Open(strFullDocumentName, false);
// Create the placement point object.
Inventor.Point2d oPoint = default(Inventor.Point2d);
oPoint = mInvApplication.TransientGeometry.CreatePoint2d(25, 25);
// Create a base view.
Inventor.DrawingView oBaseView = (Inventor.DrawingView)oSheet.DrawingViews.
AddBaseView(oModel, oPoint, 2, Inventor.ViewOrientationTypeEnum.kIsoTopLeftViewOrientation,
Inventor.DrawingViewStyleEnum.kHiddenLineRemovedDrawingViewStyle, "", Type.Missing, oBaseViewOptions);
// Release reference of the invisibly open model
oModel.ReleaseReference();
}
public void CreateOrdinateDimensions()
{
// Set a reference to the drawing document.
// This assumes a drawing document is active.
Inventor.DrawingDocument oDrawDoc = (Inventor.DrawingDocument)mInvApplication.ActiveDocument;
// Set a reference to the active sheet.
Inventor.Sheet oActiveSheet = (Inventor.Sheet)oDrawDoc.ActiveSheet;
// Set a reference to the drawing curve segment.
// This assumes that a linear drawing curve is selected.
Inventor.DrawingCurveSegment oDrawingCurveSegment = (Inventor.DrawingCurveSegment)oDrawDoc.SelectSet[1];
// Set a reference to the drawing curve.
Inventor.DrawingCurve oDrawingCurve = default(Inventor.DrawingCurve);
oDrawingCurve = oDrawingCurveSegment.Parent;
if (!(oDrawingCurve.CurveType == Inventor.CurveTypeEnum.kLineSegmentCurve))
{
//MessageBox.Show("A linear curve should be selected for this sample.");
return;
}
// Create point intents to anchor the dimension to.
Inventor.GeometryIntent oDimIntent1 = default(Inventor.GeometryIntent);
oDimIntent1 = oActiveSheet.CreateGeometryIntent(oDrawingCurve, Inventor.PointIntentEnum.kStartPointIntent);
Inventor.GeometryIntent oDimIntent2 = default(Inventor.GeometryIntent);
oDimIntent2 = oActiveSheet.CreateGeometryIntent(oDrawingCurve, Inventor.PointIntentEnum.kEndPointIntent);
// Set a reference to the view to which the curve belongs.
Inventor.DrawingView oDrawingView = default(Inventor.DrawingView);
oDrawingView = oDrawingCurve.Parent;
// If origin indicator has not been already created, create it first.
if (!oDrawingView.HasOriginIndicator)
{
// The indicator will be located at the start point of the selected curve.
oDrawingView.CreateOriginIndicator(oDimIntent1);
}
// Set a reference to the ordinate dimensions collection.
Inventor.OrdinateDimensions oOrdinateDimensions = default(Inventor.OrdinateDimensions);
oOrdinateDimensions = oActiveSheet.DrawingDimensions.OrdinateDimensions;
// Create the x-axis vector
Inventor.Vector2d oXAxis = default(Inventor.Vector2d);
oXAxis = mInvApplication.TransientGeometry.CreateVector2d(1, 0);
Inventor.Vector2d oCurveVector = default(Inventor.Vector2d);
oCurveVector = oDrawingCurve.StartPoint.VectorTo(oDrawingCurve.EndPoint);
Inventor.Point2d oTextOrigin1 = default(Inventor.Point2d);
Inventor.Point2d oTextOrigin2 = default(Inventor.Point2d);
Inventor.DimensionTypeEnum DimType = default(Inventor.DimensionTypeEnum);
if (oCurveVector.IsParallelTo(oXAxis))
{
// Selected curve is horizontal
DimType = Inventor.DimensionTypeEnum.kVerticalDimensionType;
// Set the text points for the 2 dimensions.
oTextOrigin1 = mInvApplication.TransientGeometry.CreatePoint2d(oDrawingCurve.StartPoint.X, oDrawingView.Top + 5);
oTextOrigin2 = mInvApplication.TransientGeometry.CreatePoint2d(oDrawingCurve.EndPoint.X, oDrawingView.Top + 5);
}
else
{
// Selected curve is vertical or at an angle.
DimType = Inventor.DimensionTypeEnum.kHorizontalDimensionType;
// Set the text points for the 2 dimensions.
oTextOrigin1 = mInvApplication.TransientGeometry.CreatePoint2d(oDrawingView.Left - 5, oDrawingCurve.StartPoint.Y);
oTextOrigin2 = mInvApplication.TransientGeometry.CreatePoint2d(oDrawingView.Left - 5, oDrawingCurve.EndPoint.Y);
}
// Create the first ordinate dimension.
Inventor.OrdinateDimension oOrdinateDimension1 = default(Inventor.OrdinateDimension);
oOrdinateDimension1 = oOrdinateDimensions.Add(oDimIntent1, oTextOrigin1, DimType);
// Create the second ordinate dimension.
Inventor.OrdinateDimension oOrdinateDimension2 = default(Inventor.OrdinateDimension);
oOrdinateDimension2 = oOrdinateDimensions.Add(oDimIntent2, oTextOrigin2, DimType);
}
// Add detail drawing view API Sample
//Description
//This sample demonstrates the creation of a detail drawing view with an attach point.
//Before running this sample, select a drawing view in the active drawing.
public void CreateDetailView()
{
// Set a reference to the drawing document.
// This assumes a drawing document is active.
Inventor.DrawingDocument oDrawDoc = (Inventor.DrawingDocument)mInvApplication.ActiveDocument;
//Set a reference to the active sheet.
Inventor.Sheet oSheet = (Inventor.Sheet)oDrawDoc.ActiveSheet;
Inventor.DrawingView oDrawingView = default(Inventor.DrawingView);
// Check to make sure a drawing view is selected.
try
{
// Set a reference to the selected drawing. This assumes
// that the selected view is not a draft view.
oDrawingView = (Inventor.DrawingView)oDrawDoc.SelectSet[1];
}
catch
{
//MessageBox.Show("A drawing view must be selected.");
return;
}
// Set a reference to the center of the base view.
Inventor.Point2d oPoint = (Inventor.Point2d)oDrawingView.Center;
// Translate point by a distance = 2 * width of the view
// This will be the placement point of the detail view.
oPoint.X = oPoint.X + 2 * oDrawingView.Width;
// Set corner one of rectangular fence as
// the left-bottom corner of the base view.
Inventor.Point2d oCornerOne = (Inventor.Point2d)oDrawingView.Center;
oCornerOne.X = oCornerOne.X - oDrawingView.Width / 2;
oCornerOne.Y = oCornerOne.Y - oDrawingView.Height / 2;
// Set corner two of rectangular fence as
// the center of the base view.
Inventor.Point2d oCornerTwo = (Inventor.Point2d)oDrawingView.Center;
// Get any linear curve from the base view
Inventor.DrawingCurve oCurveToUse = null;
foreach (Inventor.DrawingCurve oCurve in oDrawingView.DrawingCurves)
{
if (oCurve.CurveType == Inventor.CurveTypeEnum.kLineSegmentCurve)
{
oCurveToUse = oCurve;
break;
}
}
// Create an intent object
Inventor.GeometryIntent oAttachPoint = (Inventor.GeometryIntent)oSheet.
CreateGeometryIntent(oCurveToUse, Inventor.PointIntentEnum.kStartPointIntent);
// Create the detail view
Inventor.DetailDrawingView oDetailView = (Inventor.DetailDrawingView)oSheet.DrawingViews.
AddDetailView(oDrawingView, oPoint, Inventor.DrawingViewStyleEnum.kFromBaseDrawingViewStyle,
false, oCornerOne, oCornerTwo, oAttachPoint, 2);
}
private void CreateDrawingDocument(out Inventor.DrawingDocument DrawingDocument, out Inventor.Sheet Sheet)
{
DrawingDocument = mInvApplication.Documents.Add(Inventor.DocumentTypeEnum.kDrawingDocumentObject, SelectedTemplateFilePath, true) as Inventor.DrawingDocument;
Sheet = DrawingDocument.Sheets[1];
}
private static Inventor.DrawingView AddDocumentBaseView(Inventor._Document Document, Inventor.Sheet Sheet, Inventor.TransientGeometry TransientGeometry, Inventor.NameValueMap BaseViewOptions)
{
double ViewWidth = 17;
Inventor.DrawingView DrawingView = Sheet.DrawingViews.AddBaseView(Document as Inventor._Document, GetDrawingCenterPoint(Sheet, TransientGeometry), 0.2, Inventor.ViewOrientationTypeEnum.kDefaultViewOrientation, Inventor.DrawingViewStyleEnum.kHiddenLineRemovedDrawingViewStyle, "", null, BaseViewOptions);
DrawingView.Scale = ViewWidth / DrawingView.Width * DrawingView.Scale;
return(DrawingView);
}
private static Inventor.DrawingView AddDocumentBaseView(Inventor._Document Document, Inventor.Sheet Sheet, Inventor.TransientGeometry TransientGeometry, Inventor.Camera Camera)
{
double ViewWidth = 17;
Inventor.DrawingView DrawingView = Sheet.DrawingViews.AddBaseView(Document as Inventor._Document, GetDrawingCenterPoint(Sheet, TransientGeometry), 0.2, Inventor.ViewOrientationTypeEnum.kArbitraryViewOrientation, Inventor.DrawingViewStyleEnum.kHiddenLineRemovedDrawingViewStyle, "", Camera, null);
DrawingView.Scale = ViewWidth / DrawingView.Width * DrawingView.Scale;
SetViewScale(Sheet, ref DrawingView);
return(DrawingView);
}