A package manager for making Quest il2cpp mods and libraries. Commonly acronymized as QPM or qpm

• package: An application with a single configuration. Can contain dependencies and has some metadata. Must have an id and a version (which must be SemVer).
• dependency: A dependency to another package. Must have an id and a version range (SemVer range).
• sharedDir: A folder that is exposed to other packages
• externDir: A folder that is used for installing dependencies

Note: You can use qpm, qpm -?, qpm --help, or qpm -h to view a list of commands.

qpm package create "PACKAGE ID" "PACKAGE VERSION"

Creates a package with id: PACKAGE ID and version: PACKAGE VERSION (which must be valid SemVer).

This will create a qpm.json folder in your current directory. This is your package configuration file and holds your package.

This will also perform some modifications to your .vscode/c_cpp_properties.json, bmbfmod.json, and Android.mk files, assuming they exist.

A common use case with qpm is to add a dependency to a package.

You must first have a valid qpm.json file within your current working directory, then you may call:

qpm dependency add "ID" -v "VERSION RANGE"

Which creates a dependency with id: ID and version range: VERSION RANGE. If -v is not specified, version range defaults to * (latest available version)

This is primarily a command used to ensure the package's collected dependencies match what you expect.

qpm collect

Should print out a listing of dependencies that it resolved. This command does not modify your package at all.

This is primarily a command used to ensure the package's collected dependencies are collapsible into something you expect.

qpm collapse

Should print out a listing of dependencies similar to Collapse Dependencies, but with identical IDs combined.

After adding one or more dependencies, you must perform a restore to properly obtain them. Dependencies that are added to your package must be resolved in order to ensure a proper build.

Dependencies are resolved using an external domain, qpackages.com. For more information on how to interface with this package index, see the publishing section.

qpm restore

Which restores all dependencies listed in your package from the package index.

Restore follows the following process:

1. Collects all dependencies
2. Collapses these dependencies
3. Iterates over the collected dependencies, obtaining a .so (if needed) for each one.
4. Iterates over the collapsed dependencies, obtaining header information (if needed) for each one.
5. Places all restored dependencies into qpm.shared.json (which is used for publishing)

During steps 3 and 4, QPM will modify your Android.mk, if it exists, backing it up to Android.mk.backup first.

At this point, you should be able to build!

There are several steps required in order to ensure your package is fit to be published on qpackages.com.

Firstly, you must perform a qpm restore (see Restoring Dependencies)

After, you must ensure you either have the headersOnly additional property set to true, or you specify soLink and/or debugSoLink.

Then, the url must be set to either a github repository (ex: https://github.com/sc2ad/QuestPackageManager) or will be interpretted as a direct download.

The download specified by this link MUST have a qpm.json file that matches the version specified in your qpm.shared.json that you plan on publishing.

After you have ensured that all of the above is true, you can call:

qpm publish

However, due to the nature of QPM, it is possible to publish invalid packages to QPM, which will cause people trouble. For this reason, please message Sc2ad#8836 before publishing a package to QPM.

qpm package edit-extra Can be used to add extra data to the additionalData property, without manual JSON edits to qpm.json and qpm.shared.json.

qpm properties-list Can be used to list all supported properties in additionalData, as well as what types they are supported in.

A full list will be available on the wiki, once I get around to making it.

Full documentation for each command will be fully available on the wiki (once I get around to making it). A subset of this information can be found by doing qpm --help.

qpm.shared.json, Android.mk.backup, and extern should never be added to a git project!

You should explicitly add:

qpm.shared.json
extern/
*.backup

to your .gitignore.

As easy as:

qpm dependency add "<DEPENDENCY ID>" -v "<NEW DEPENDENCY VERSION>"

followed by:

qpm restore

QPM caches all restored dependencies to: <QPM WORKING DIRECTORY>/QPM_Temp/

You can forcibly clear the QPM cache by calling:

qpm cache clear

QPM was built with Beat Saber Quest development in mind. This does not mean it does not work on other games, or for other platforms, but it makes Beat Saber development very easy.

In order to get started, it is recommended you have a VSCode project open, with existing .vscode/c_cpp_properties.json, ./Android.mk, and ./bmbfmod.json files.

NOTE: Using the bsqm template may cause issues, since you will need to delete your extern folder and your .gitmodules file before continuing!

Then, you should start by creating your QPM package. This can be done by calling:

qpm package create <YOUR MOD ID> <YOUR VERSION>

After this, you should add a dependency to beatsaber-hook. It is good practice to specify an encompassing version range for your dependencies, so ^x.y.z where x.y.z is the latest beatsaber-hook version.

This can be found by checking the latest published package by visiting this link: https://qpackages.com/beatsaber-hook/.

Once you know the version range you would like, call:

qpm dependency add "beatsaber-hook" -v "<VERSION RANGE>"

In most cases, this would be all we need to do before calling a qpm restore and building our mod. SADLY, beatsaber-hook has an issue which requires us to take one additional step. We need to edit qpm.json and edit the dependency from:

"dependencies": [
    {
        "id": "beatsaber-hook",
        "versionRange": "<VERSION RANGE>",
        "additionalData": {}
    }
]

to:

"dependencies": [
    {
        "id": "beatsaber-hook",
        "versionRange": "<VERSION RANGE>",
        "additionalData": {
            "extraFiles": [
                "src/inline-hook"
            ]
        }
    }
]

NOW we can perform a:

qpm restore

Finally, we just need to add a few lines to our Android.mk and we will be all set!

For your main module's LOCAL_CFLAGS or LOCAL_CPP_FLAGS, add the following flag: -isystem"./extern/libil2cpp/il2cpp/libil2cpp". This adds libil2cpp from your extern folder.

For the beatsaber-hook_x_y_z module's LOCAL_EXPORT_C_FLAGS, add the following flags: -DNEED_UNSAFE_CSHARP -DUNITY_2019

Add to your main module the following (assuming you have wildcard defined):

LOCAL_SRC_FILES += $(call rwildcard,extern/beatsaber-hook/src/inline-hook,*.cpp)
LOCAL_SRC_FILES += $(call rwildcard,extern/beatsaber-hook/src/inline-hook,*.c)

For intellisense, add ${workspaceFolder}/extern/libil2cpp/il2cpp/libil2cpp to your .vscode/c_cpp_properties.json's includePath.

Now you should be all set to build! (You won't need to make these modifications the next time you perform a qpm restore)

Coming soon, QPM will allow for plugins to allow for modifications of additional files, or perform additional actions for all commands. QPM will also allow plugins to add commands as well.