/// <summary> /// Get the hook orient of the top rebar /// </summary> /// <param name="geomInfo">the rebar geometry support information</param> /// <param name="location">the location of top rebar</param> /// <returns>the hook orient of the top hook</returns> private RebarHookOrientation GetTopHookOrient(RebarGeometry geomInfo, TopRebarLocation location) { // Top center rebar doesn't need hook. if (TopRebarLocation.Center == location) { throw new Exception("Center top rebar doesn't have any hook."); } // Get the hook direction, rebar normal and rebar line Autodesk.Revit.DB.XYZ hookVec = m_geometry.GetDownDirection(); Autodesk.Revit.DB.XYZ normal = geomInfo.Normal; Line rebarLine = geomInfo.Curves[0] as Line; // get the top start hook orient if (TopRebarLocation.Start == location) { Autodesk.Revit.DB.XYZ curveVec = GeomUtil.SubXYZ(rebarLine.get_EndPoint(1), rebarLine.get_EndPoint(0)); return(GeomUtil.GetHookOrient(curveVec, normal, hookVec)); } else // get the top end hook orient { Autodesk.Revit.DB.XYZ curveVec = GeomUtil.SubXYZ(rebarLine.get_EndPoint(0), rebarLine.get_EndPoint(1)); return(GeomUtil.GetHookOrient(curveVec, normal, hookVec)); } }
/// <summary> /// Create the rebar at the top of beam, according to the top rebar location /// </summary> /// <param name="location">location of rebar which need to be created</param> /// <returns>the created rebar, return null if the creation is unsuccessful</returns> private Rebar FillTopBar(TopRebarLocation location) { //get the geometry information of the rebar RebarGeometry geomInfo = m_geometry.GetTopRebar(location); RebarHookType startHookType = null; //the start hook type of the rebar RebarHookType endHookType = null; // the end hook type of the rebar RebarBarType rebarType = null; // the rebar type RebarHookOrientation startOrient = RebarHookOrientation.Right; // the start hook orient RebarHookOrientation endOrient = RebarHookOrientation.Left; // the end hook orient // decide the rebar type, hook type and hook orient according to location switch (location) { case TopRebarLocation.Start: startHookType = m_topHookType; // start hook type rebarType = m_topEndType; // rebar type startOrient = GetTopHookOrient(geomInfo, location); // start hook orient break; case TopRebarLocation.Center: rebarType = m_topCenterType; // rebar type break; case TopRebarLocation.End: endHookType = m_topHookType; // end hook type rebarType = m_topEndType; // rebar type endOrient = GetTopHookOrient(geomInfo, location); // end hook orient break; } // create the rebar return(PlaceRebars(rebarType, startHookType, endHookType, geomInfo, startOrient, endOrient)); }
/// <summary> /// Create the transverse rebars, according to the location of transverse rebars /// </summary> /// <param name="location">location of rebar which need to be created</param> /// <returns>the created rebar, return null if the creation is unsuccessful</returns> public Rebar FillTransverseBar(TransverseRebarLocation location) { // Get the geometry information which support rebar creation RebarGeometry geomInfo = new RebarGeometry(); switch (location) { case TransverseRebarLocation.Start: // start transverse rebar case TransverseRebarLocation.End: // end transverse rebar geomInfo = m_geometry.GetTransverseRebar(location, m_transverseEndSpacing); break; case TransverseRebarLocation.Center:// center transverse rebar geomInfo = m_geometry.GetTransverseRebar(location, m_transverseCenterSpacing); break; } RebarHookOrientation startHook = RebarHookOrientation.Right; RebarHookOrientation endHook = RebarHookOrientation.Left; if (!GeomUtil.IsInRightDir(geomInfo.Normal)) { startHook = RebarHookOrientation.Left; endHook = RebarHookOrientation.Right; } // create the rebar return(PlaceRebars(m_transverseType, m_transverseHookType, m_transverseHookType, geomInfo, startHook, endHook)); }
/// <summary> /// Create the transverse rebars, according to the transverse rebar location /// </summary> /// <param name="location">location of rebar which need to be created</param> /// <returns>the created rebar, return null if the creation is unsuccessful</returns> public Rebar FillTransverseBar(TransverseRebarLocation location) { // Get the geometry information which support rebar creation RebarGeometry geomInfo = new RebarGeometry(); RebarBarType barType = null; switch (location) { case TransverseRebarLocation.Start: // start transverse rebar case TransverseRebarLocation.End: // end transverse rebar geomInfo = m_geometry.GetTransverseRebar(location, m_transverseEndSpacing); barType = m_transverseEndType; break; case TransverseRebarLocation.Center:// center transverse rebar geomInfo = m_geometry.GetTransverseRebar(location, m_transverseCenterSpacing); barType = m_transverseCenterType; break; default: break; } // create the rebar return(PlaceRebars(barType, m_transverseHookType, m_transverseHookType, geomInfo, RebarHookOrientation.Right, RebarHookOrientation.Left)); }
/// <summary> /// Create the rebar at the bottom of beam /// </summary> /// <returns>true if the creation is successful, otherwise false</returns> public bool FillBottomBars() { // get the geometry information of the bottom rebar RebarGeometry geomInfo = m_geometry.GetBottomRebar(); // create the rebar Rebar rebar = PlaceRebars(m_bottomType, null, null, geomInfo, RebarHookOrientation.Left, RebarHookOrientation.Left); return(null != rebar); }
/// <summary> /// A wrap fuction which used to create the reinforcement. /// </summary> /// <param name="rebarType">The element of RebarBarType</param> /// <param name="startHook">The element of start RebarHookType</param> /// <param name="endHook">The element of end RebarHookType</param> /// <param name="geomInfo">The goemetry information of the rebar</param> /// <param name="startOrient">An Integer defines the orientation of the start hook</param> /// <param name="endOrient">An Integer defines the orientation of the end hook</param> /// <returns></returns> protected Rebar PlaceRebars(RebarBarType rebarType, RebarHookType startHook, RebarHookType endHook, RebarGeometry geomInfo, RebarHookOrientation startOrient, RebarHookOrientation endOrient) { Autodesk.Revit.DB.XYZ normal = geomInfo.Normal; // the direction of rebar distribution IList <Curve> curves = geomInfo.Curves; // the shape of the rebar curves // Invoke the NewRebar() method to create rebar Rebar createdRebar = Rebar.CreateFromCurves(m_revitDoc, Autodesk.Revit.DB.Structure.RebarStyle.Standard, rebarType, startHook, endHook, m_hostObject, normal, curves, startOrient, endOrient, false, true); if (null == createdRebar) // Assert the creation is successful { return(null); } // Change the rebar number and spacing properties to the user wanted SetRebarSpaceAndNumber(createdRebar, geomInfo.RebarNumber, geomInfo.RebarSpacing); return(createdRebar); }
/// <summary> /// Create the vertical rebar according the location /// </summary> /// <param name="location">location of rebar which need to be created</param> /// <returns>the created rebar, return null if the creation is unsuccessful</returns> public Rebar FillVerticalBar(VerticalRebarLocation location) { //calculate the rebar number in different location int rebarNubmer = m_verticalRebarNumber / 4; switch (location) { case VerticalRebarLocation.East: // the east vertical rebar if (0 < m_verticalRebarNumber % 4) { rebarNubmer++; } break; case VerticalRebarLocation.North: // the north vertical rebar if (2 < m_verticalRebarNumber % 4) { rebarNubmer++; } break; case VerticalRebarLocation.West: // the west vertical rebar if (1 < m_verticalRebarNumber % 4) { rebarNubmer++; } break; case VerticalRebarLocation.South: // the south vertical rebar break; } // get the geometry information for rebar creation RebarGeometry geomInfo = m_geometry.GetVerticalRebar(location, rebarNubmer); // create the rebar return(PlaceRebars(m_verticalType, null, null, geomInfo, RebarHookOrientation.Left, RebarHookOrientation.Left)); }