private void MouseDblClkProc_XayDungLuoiLoMin(int hWnd, int Button, int Flags, int Xwin, int Ywin, double Xdrw, double Ydrw)
{
int hBlockModel = Lcad.PropGetHandle(hDrw, Lcad.LC_PROP_DRW_BLOCK_MODEL);
if (mgCircles == null)
{
mgCircles = new ManageCircle();
}
else
{
Lcad.LayerClear(layerLoMin, hBlockModel);
Lcad.LayerClear(layerLuoiKichThuoc, hBlockModel);
mgCircles = new ManageCircle();
}
int hEntCircle = Lcad.BlockAddCircle(hBlockModel, Xdrw, Ydrw, banKinh, false);
Lcad.PropPutInt(hEntCircle, Lcad.LC_PROP_ENT_KEY, keyCircle);
Lcad.PropPutStr(hEntCircle, Lcad.LC_PROP_ENT_LAYER, "LoMin");
Lcad.BlockUnselect(hBlockModel);
//tạo danh sách cột đầu tiên
List<Circle> listCotDau = new List<Circle>();
Circle root = new Circle(hEntCircle);
listCotDau.Add(root);
//tạo cột đầu tiên từ điểm gốc (số điểm trong cột ứng với số hàng trừ đi điểm gốc)
for (int i = 0; i < soHang - 1; i++)
{
int newHEnt = Lcad.BlockAddClone(hBlockModel, listCotDau[i].GetHandle());
Lcad.PropPutInt(newHEnt, Lcad.LC_PROP_ENT_KEY, keyCircle);
Lcad.BlockSelectEnt(hBlockModel, newHEnt, true);
Lcad.BlockSelMove(hBlockModel, 0, khoangCachHang, false, true);
Lcad.BlockUnselect(hBlockModel);
listCotDau.Add(new Circle(newHEnt));
}
mgCircles.AddListCircle(listCotDau);
//thêm các cột còn lại (ứng với số cột trừ đi cột đầu)
for (int i = 0; i < soCot - 1; i++)
{
List<Circle> listCotGanNhat = new List<Circle>();
List<Circle> listCotMoi = new List<Circle>();
if (khoangCachCot > 0)
{
listCotGanNhat = mgCircles.GetListCirleOfLastColumn();
}
else
{
listCotGanNhat = mgCircles.GetListCirleOfFirstColumn();
}
foreach (var circle in listCotGanNhat)
{
int newHEnt = Lcad.BlockAddClone(hBlockModel, circle.GetHandle());
Lcad.PropPutInt(newHEnt, Lcad.LC_PROP_ENT_KEY, keyCircle);
Lcad.BlockSelectEnt(hBlockModel, newHEnt, true);
Lcad.BlockSelMove(hBlockModel, khoangCachCot, 0, false, true);
Lcad.BlockUnselect(hBlockModel);
listCotMoi.Add(new Circle(newHEnt));
}
mgCircles.AddListCircle(listCotMoi);
}
//hiển thị lưới kích thước
if (this.banVeChinh.HienKhoangCach)
{
DungLuoiKichThuoc();
}
//load lại
//MessageBox.Show("hang" + soHang + "\ncot" + soCot + "\nkc hang" + khoangCachHang + "\nkc cot" + khoangCachCot + "\nX" + Xdrw + "\nY" + Ydrw);
Lcad.DrwRegenViews(hDrw, 0);
Lcad.WndExeCommand(hWnd, Lcad.LC_CMD_ZOOM_EXT, 0);
Lcad.OnEventMouseDblClk(_EventMouseDbclick_LoMin);
LuuHoChieu(this.hoChieuChinh.MaHoChieu); //ăn gian...
BS_LiteCAD.ShowNotifyAutoHide(elementHost1, "Xây dựng lưới lỗ khoan - hoàn thành");
}
//hiện thông báo
//private void ShowNotifyAutoHide(String text)
//{
// UserControl_Notify note = new UserControl_Notify(text);
// elementHost1.Child = note;
// note.ShowNotifyAutoHide();
//}
//lấy danh sách lỗ khoan trên bản vẽ
private void GetCirlcesFromAutocadFile()
{
int hBlockModel = Lcad.PropGetHandle(hDrw, Lcad.LC_PROP_DRW_BLOCK_MODEL);
int hEnt = Lcad.BlockGetFirstEnt(hBlockModel);
List<Circle> listCircles = new List<Circle>();
while (hEnt != 0)
{
int entType = Lcad.PropGetInt(hEnt, Lcad.LC_PROP_ENT_TYPE);
if (!Lcad.PropGetBool(hEnt, Lcad.LC_PROP_ENT_DELETED)) //kiểm tra xem ent bị xóa hay không
{
if (entType == Lcad.LC_ENT_CIRCLE)
{
listCircles.Add(new Circle(hEnt));
}
//cách khác (dùng key, vì cái gì đấy mà ko lấy được LC_PROP_ENT_TYPE) - do thư viện....
else
{
int _key = Lcad.PropGetInt(hEnt, Lcad.LC_PROP_ENT_KEY);
if (_key == keyCircle)
{
listCircles.Add(new Circle(hEnt));
}
}
}
hEnt = Lcad.BlockGetNextEnt(hBlockModel, hEnt);
}
mgCircles = new ManageCircle();
mgCircles.AddListCircle(listCircles);
}
private void loadFile_FormMoBanVeDatabase(String idHoChieu)
{
this.hoChieuChinh = BS_HoChieu.HoChieu(idHoChieu);
this.banVeChinh = BS_BanVe.BanVe(this.hoChieuChinh.MaBanVe);
List<LoKhoan> danhSachLoKhoan = BS_LoKhoan.DanhSachLoKhoan(idHoChieu);
List<Circle> danhSachCircle = new List<Circle>();
mgCircles = new ManageCircle();
//dựng bản vẽ mới
//this.banVeChinh.HienKhoangCach = false;
this.Text = "Bản vẽ: [" + this.banVeChinh.TenBanVe + "]";
Lcad.DrwLoad(hDrw, BS_Template.ChonTemplate(this.banVeChinh.Template).DuongDan, this.Handle, hWnd);
layerLoMin = Lcad.DrwAddLayer(hDrw, "LoMin", "cyan", 0, Lcad.LC_LWEIGHT_DEFAULT);
layerLuoiKichThuoc = Lcad.DrwAddLayer(hDrw, "LuoiKichThuoc", "foreground", 0, Lcad.LC_LWEIGHT_DEFAULT);
int hBlockModel = Lcad.PropGetHandle(hDrw, Lcad.LC_PROP_DRW_BLOCK_MODEL);
foreach (LoKhoan value in danhSachLoKhoan)
{
int hEntCircle = Lcad.BlockAddCircle(hBlockModel, value.ToaDoX, value.ToaDoY, value.BanKinh, false);
Lcad.PropPutInt(hEntCircle, Lcad.LC_PROP_ENT_ID, int.Parse(value.MaLoKhoan));
Lcad.PropPutInt(hEntCircle, Lcad.LC_PROP_ENT_KEY, keyCircle);
Lcad.PropPutStr(hEntCircle, Lcad.LC_PROP_ENT_LAYER, "LoMin");
danhSachCircle.Add(new Circle(hEntCircle));
}
mgCircles.AddListCircle(danhSachCircle);
if (banVeChinh.HienKhoangCach)
{
Lcad.LayerClear(layerLuoiKichThuoc, hBlockModel);
DungLuoiKichThuoc();
}
//vẽ lại hình
Lcad.DrwRegenViews(hDrw, 0);
Lcad.WndExeCommand(hWnd, Lcad.LC_CMD_ZOOM_EXT, 0);
BS_LiteCAD.ShowNotifyAutoHide(elementHost1, this.banVeChinh.TenBanVe + " - đã mở");
//mở form dựng lưới lỗ khoan
if(mgCircles.GetListCircles().Count == 0)
{
FormXayDungLoKhoan fm = new FormXayDungLoKhoan();
fm.MyGetData = new FormXayDungLoKhoan.GetData(loadFile_FormXayDungLoKhoan);
fm.Show();
}
}
private void barButtonItem_Move_ItemClick(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
{
//select toàn bộ lỗ khoan
int hBlockModel = Lcad.PropGetHandle(hDrw, Lcad.LC_PROP_DRW_BLOCK_MODEL);
int hEnt = Lcad.BlockGetFirstEnt(hBlockModel);
List<Circle> listCircles = new List<Circle>();
while (hEnt != 0)
{
int entType = Lcad.PropGetInt(hEnt, Lcad.LC_PROP_ENT_TYPE);
if (!Lcad.PropGetBool(hEnt, Lcad.LC_PROP_ENT_DELETED)) //kiểm tra xem ent bị xóa hay không
{
if (entType == Lcad.LC_ENT_CIRCLE)
{
Lcad.BlockSelectEnt(hBlockModel, hEnt, true);
}
//cách khác (dùng key, vì cái gì đấy mà ko lấy được LC_PROP_ENT_TYPE) - do thư viện....
else
{
int _key = Lcad.PropGetInt(hEnt, Lcad.LC_PROP_ENT_KEY);
if (_key == keyCircle)
{
Lcad.BlockSelectEnt(hBlockModel, hEnt, true);
}
}
}
hEnt = Lcad.BlockGetNextEnt(hBlockModel, hEnt);
}
//chạy hàm move
bool flag = Lcad.WndExeCommand(hWnd, Lcad.LC_CMD_MOVE, 0);
if (flag)
{
mgCircles = new ManageCircle();
GetCirlcesFromAutocadFile();
if (this.banVeChinh.HienKhoangCach)
{
DungLuoiKichThuoc();
}
}
}
private void loadFile_FormBanVeMoi(String idHoChieu)
{
this.hoChieuChinh = BS_HoChieu.HoChieu(idHoChieu);
this.banVeChinh = BS_BanVe.BanVe(this.hoChieuChinh.MaBanVe);
mgCircles = new ManageCircle();
//dựng bản vẽ mới
this.Text = "Hộ chiếu: [" + this.hoChieuChinh.TenHoChieu + "]";
Lcad.DrwLoad(hDrw, BS_Template.ChonTemplate(this.banVeChinh.Template).DuongDan, this.Handle, hWnd);
layerLoMin = Lcad.DrwAddLayer(hDrw, "LoMin", "cyan", 0, Lcad.LC_LWEIGHT_DEFAULT);
layerLuoiKichThuoc = Lcad.DrwAddLayer(hDrw, "LuoiKichThuoc", "foreground", 0, Lcad.LC_LWEIGHT_DEFAULT);
//vẽ lại hình
Lcad.DrwRegenViews(hDrw, 0);
Lcad.WndExeCommand(hWnd, Lcad.LC_CMD_ZOOM_EXT, 0);
//mở form dựng lưới lỗ khoan
if (mgCircles.GetListCircles().Count == 0)
{
FormXayDungLoKhoan fm = new FormXayDungLoKhoan();
fm.MyGetData = new FormXayDungLoKhoan.GetData(loadFile_FormXayDungLoKhoan);
fm.Show();
}
}
private void barButtonItem_DauSongSong_ItemClick(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
{
ManageCircle temp = new ManageCircle();
temp = mgCircles;
List<Circle> firstCollum = temp.GetListCirleOfFirstColumn();
List<Circle> lastCollum = temp.GetListCirleOfLastColumn();
int rowNumber = temp.GetRowCount();
double sumY1 = 0, sumY2 = 0;
double x1 = 0, y1 = 0, x2 = 0, y2 = 0;
foreach (Circle c in firstCollum)
{
x1 = c.GetX();
sumY1 += c.GetY();
}
foreach (Circle c in lastCollum)
{
x2 = c.GetX();
sumY2 += c.GetY();
}
y1 = y2 = sumY1 / rowNumber;
x1 = x1 - banVeChinh.DeltaX;
x2 = x2 + banVeChinh.DeltaX;
foreach(Circle c in firstCollum)
{
DrawLine(c.GetX(), c.GetY(), x1, y1);
}
foreach (Circle c in lastCollum)
{
DrawLine(c.GetX(), c.GetY(), x2, y2);
}
int lineIndex = 1;
do
{
List<Circle> currentRow = temp.GetListCircleRow(lineIndex);
for (int i = 0; i < currentRow.Count - 1; i++)
{
DrawLine_X(currentRow[i], currentRow[i + 1]);
}
lineIndex++;
//temp.RemoveListCircles(currentRow);
}
while (lineIndex <= temp.GetRowCount());
Lcad.DrwRegenViews(hDrw, 0);
Lcad.WndExeCommand(hWnd, Lcad.LC_CMD_ZOOM_EXT, 0);
}
private void barButtonItem_DauNoiTiep_ItemClick(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
{
ManageCircle temp = new ManageCircle();
temp = mgCircles;
int lineIndex = 1;
do
{
List<Circle> currentRow = temp.GetListCircleRow(lineIndex);
for (int i = 0; i < currentRow.Count - 1; i++)
{
DrawLine_X(currentRow[i], currentRow[i + 1]);
}
if(lineIndex % 2 != 0)
{
List<Circle> currentCollum = temp.GetListCirleOfLastColumn();
if(currentCollum.Count > 1)
{
DrawLine_Y(currentCollum[0], currentCollum[1]);
}
}
else
{
List<Circle> currentCollum = temp.GetListCirleOfFirstColumn();
if (currentCollum.Count > 1)
{
DrawLine_Y(currentCollum[0], currentCollum[1]);
}
}
//temp.RemoveListCircles(currentRow);
lineIndex++;
}
while (lineIndex <= temp.GetRowCount());
Lcad.DrwRegenViews(hDrw, 0);
Lcad.WndExeCommand(hWnd, Lcad.LC_CMD_ZOOM_EXT, 0);
}
private void MouseDblClkProc_XayDungLuoiLoMin(int hWnd, int Button, int Flags, int Xwin, int Ywin, double Xdrw, double Ydrw)
{
if (mgCircles == null)
{
mgCircles = new ManageCircle();
}
int hModelBlock = Lcad.PropGetHandle(hDrw, Lcad.LC_PROP_DRW_BLOCK_MODEL);
double r = 0.5;
int hEntCircle = Lcad.BlockAddCircle(hModelBlock, Xdrw, Ydrw, r, false);
Lcad.BlockUnselect(hModelBlock);
// Add a column of new Circles
List<Circle> listCotDau = new List<Circle>();
Circle root = new Circle(hEntCircle);
listCotDau.Add(root);
//Them hang
//khoangCachHang = khoangCachHang * -1;
for (int i = 0; i < soHang - 1; i++)
{
int newHEnt = Lcad.BlockAddClone(hModelBlock, listCotDau[i].GetHandle());
Lcad.BlockSelectEnt(hModelBlock, newHEnt, true);
Lcad.BlockSelMove(hModelBlock, 0, khoangCachHang, false, true);
Lcad.BlockUnselect(hModelBlock);
listCotDau.Add(new Circle(newHEnt));
}
mgCircles.AddListCircle(listCotDau);
//Them cot
for (int i = 0; i < soCot - 1; i++)
{
List<Circle> listCotGanNhat = new List<Circle>();
List<Circle> listCotMoi = new List<Circle>();
if (khoangCachCot > 0)
{
listCotGanNhat = mgCircles.GetListCirleOfLastColumn();
}
else
{
listCotGanNhat = mgCircles.GetListCirleOfFirstColumn();
}
foreach (var circle in listCotGanNhat)
{
int newHEnt = Lcad.BlockAddClone(hModelBlock, circle.GetHandle());
Lcad.BlockSelectEnt(hModelBlock, newHEnt, true);
Lcad.BlockSelMove(hModelBlock, khoangCachCot, 0, false, true);
Lcad.BlockUnselect(hModelBlock);
listCotMoi.Add(new Circle(newHEnt));
}
mgCircles.AddListCircle(listCotMoi);
}
MessageBox.Show("hang" + soHang + "\ncot" + soCot + "\nkc hang" + khoangCachHang + "\nkc cot" + khoangCachCot + "\nX" + Xdrw + "\nY" + Ydrw);
Lcad.DrwRegenViews(hDrw, 0);
Lcad.WndExeCommand(hWnd, Lcad.LC_CMD_ZOOM_EXT, 0);
Lcad.OnEventMouseDblClk(_EventMouseDbclick_LoMin);
}
private void LoadFile_FormStart(String id, String path)
{
if (id.Equals("-1"))
{
mgCircles = new ManageCircle();
this.Text = path;
this.nameOfBlock = 1;
Lcad.DrwLoad(hDrw, path, this.Handle, hWnd);
Lcad.DrwRegenViews(hDrw, 0);
Lcad.WndExeCommand(hWnd, Lcad.LC_CMD_ZOOM_EXT, 0);
}
else
{
//lấy danh sách lỗ khoan
List<LoKhoan> danhSachLoKhoan = BS_LoKhoan.DanhSachLoKhoan(id);
this.Text = path;
this.nameOfBlock = 1;
Lcad.DrwLoad(hDrw, path, this.Handle, hWnd);
int hBlockModel = Lcad.PropGetHandle(hDrw, Lcad.LC_PROP_DRW_BLOCK_MODEL);
foreach (LoKhoan value in danhSachLoKhoan)
{
int maLK = int.Parse(value.MaLoKhoan);
int x = int.Parse(value.ToaDoX.ToString());
int y = int.Parse(value.ToaDoY.ToString());
double r = value.BanKinh;
int hEntCircle = Lcad.BlockAddCircle(hBlockModel, x, y, r, false);
Lcad.PropPutInt(hEntCircle, Lcad.LC_PROP_ENT_ID, maLK);
}
Lcad.DrwRegenViews(hDrw, 0);
Lcad.WndExeCommand(hWnd, Lcad.LC_CMD_ZOOM_EXT, 0);
//getCircleFromAutocadFile();
}
}
