protected void Page_Load(object sender, EventArgs e)
{
user = new eUser(UserArea);
user.Check();
model = new eModel(ModelID, user);
Action = new eAction();
Action.Actioning += new eActionHandler(Action_Actioning);
Action.Listen();
}
protected void Page_Load(object sender, EventArgs e)
{
allids = getParentIDS(pid);
user = new eUser("System");
model = new eModel(ModelID, user);
Action = new eAction(user);
Action.Actioning += new eActionHandler(Action_Actioning);
Action.Listen();
}
protected void Page_Load(object sender, EventArgs e)
{
if (Request.QueryString["area"] != null)
{
UserArea = Request.QueryString["area"].ToString();
}
eUser user = new eUser(UserArea);
eModel model = new eModel(ModelID, user);
LitBody.Text = model.getListHTML();
}
protected void Page_Load(object sender, EventArgs e)
{
user = new eUser("Mobile");
user.Check();
model = new eModel(ModelID, user);
model.Mode = "mobile";
switch (model.Action.Value)
{
case "":
LitBody.Text = model.getListHTML();
break;
case "add":
LitBody.Text = model.getAddHTML();
break;
case "edit":
LitBody.Text = model.getEditHTML();
break;
case "copy":
LitBody.Text = model.getEditHTML();
break;
case "view":
LitBody.Text = model.getViewHTML();
break;
case "save":
model.Save();
break;
case "del":
model.Delete();
break;
case "addsub":
eBase.Write(model.getAddHTML());
eBase.End();
break;
case "viewsub":
eBase.Write(model.getViewHTML());
eBase.End();
break;
}
}
/// <summary>
/// This method will parse Spectrum Analyzer configuration and model string read from data file and will update current configuration to match that.
/// Note: for this to work the device must be disconnected, you cannot change runtime parameters if a device is connected
/// Rather than parsing, a better way since the begining would have been to store each and everyone of the parameters separately in the file but,
/// given that was not the case and to keep backward compatibility with files, we keep the string human readable format
/// and parse it here for machine usability.
/// </summary>
private void UpdateOfflineConfigurationParameters_Analyzer(string sConfigurationString, string sModel)
{
if (PortConnected)
return; //we do this only if device is offline
if (!String.IsNullOrEmpty(sConfigurationString))
{
string sValues = sConfigurationString.Replace(" - ", "@").ToLower(); //get a reliable separator field
sValues = sValues.Replace("from file:", "");
sValues = sValues.Replace("mhz", "");
sValues = sValues.Replace("khz", "");
sValues = sValues.Replace("dbm", "");
sValues = sValues.Replace("start:", "");
sValues = sValues.Replace("stop:", "");
sValues = sValues.Replace("center:", "");
sValues = sValues.Replace("span:", "");
sValues = sValues.Replace("sweep step:", "");
sValues = sValues.Replace("rbw:", "");
sValues = sValues.Replace("amp offset:", "");
sValues = sValues.Replace(" ", "");
string[] arrValues = sValues.Split('@');
//note, we do not use many of these fiels because already came from sweep data in binary format
m_fRBWKHZ = 0.0f;
m_fOffset_dB = 0.0f;
if (arrValues.Length >= 6)
{
if (arrValues.Length >= 6)
m_fRBWKHZ = Convert.ToDouble(arrValues[5]);
if (arrValues.Length >= 7)
m_fOffset_dB = (float)Convert.ToDouble(arrValues[6]);
}
}
if (!String.IsNullOrEmpty(sModel))
{
string sValues = sModel.Replace(" - ", "@").ToLower(); //get a reliable separator field
sValues = sValues.Replace("-", "@");
sValues = sValues.Replace("from file:", "");
sValues = sValues.Replace("expansion module:", "");
sValues = sValues.Replace("client v", "");
sValues = sValues.Replace("firmware v", "");
sValues = sValues.Replace("model:", "");
sValues = sValues.Replace("active range:", "");
sValues = sValues.Replace("mhz", "");
sValues = sValues.Replace("no expansion module found",eModel.MODEL_NONE.ToString().ToLower());
sValues = sValues.Replace(" ", "");
string[] arrValues = sValues.Split('@');
m_sRFExplorerFirmware = "";
m_eMainBoardModel = eModel.MODEL_NONE;
m_eExpansionBoardModel= eModel.MODEL_NONE;
m_eActiveModel = eModel.MODEL_NONE;
m_bExpansionBoardActive = false;
if (arrValues.Length > 2)
{
//Update model enumerators from text
string sModelMainBoard = arrValues[2];
string sModelExpansion = arrValues[3];
m_bExpansionBoardActive = false;
//First determine what is the active board
if (sModelExpansion.Contains(_ACTIVE.ToLower()))
{
m_bExpansionBoardActive = true;
}
sModelMainBoard = sModelMainBoard.Replace(_ACTIVE.ToLower(), "");
sModelExpansion = sModelExpansion.Replace(_ACTIVE.ToLower(), "");
//Now get each board model
m_eMainBoardModel = GetModelEnumFromText(sModelMainBoard);
m_eExpansionBoardModel = GetModelEnumFromText(sModelExpansion);
if (m_bExpansionBoardActive)
{
m_eActiveModel = m_eExpansionBoardModel;
}
else
{
m_eActiveModel = m_eMainBoardModel;
}
//Get firmware
m_sRFExplorerFirmware = arrValues[1];
//Get max min frequency
MinFreqMHZ = Convert.ToDouble(arrValues[4]);
MaxFreqMHZ = Convert.ToDouble(arrValues[5]);
MaxSpanMHZ = 0.0; //Unknown span, not saved in file format
}
}
}
/// <summary>
/// Returns a human readable and normalized identifier text for the model specified in the enum
/// </summary>
/// <param name="model">RFExplorer model</param>
/// <returns>model text identifier such as 433M or WSUB1G</returns>
public static string GetModelTextFromEnum(eModel model)
{
return arrModels[(int)model];
}
public bool ProcessReceivedString(bool bProcessAllEvents, out string sReceivedString)
{
bool bDraw = false;
sReceivedString = "";
try
{
do
{
bool bWrongFormat = false;
object objNew = null;
long nCount = 0;
try
{
Monitor.Enter(m_arrReceivedData);
nCount = m_arrReceivedData.Count;
if (nCount == 0)
break;
objNew = m_arrReceivedData.Dequeue();
}
catch (Exception obEx)
{
ReportLog("m_arrReceivedStrings processing: " + obEx.ToString());
}
finally
{
Monitor.Exit(m_arrReceivedData);
}
if (objNew.GetType() == typeof(RFEConfiguration))
{
RFEConfiguration objConfiguration = (RFEConfiguration)objNew;
ReportLog("Received configuration: " + objConfiguration.sLineString);
if (m_arrSpectrumAnalyzerEmbeddedCalibrationOffsetDB == null)
{
//request internal calibration data, if available
SendCommand("Cq");
}
if (IsGenerator())
{
//signal generator
RFGenStartFrequencyMHZ = objConfiguration.fStartMHZ;
RFGenStepFrequencyMHZ = objConfiguration.fStepMHZ;
RFGenCWFrequencyMHZ = objConfiguration.fRFEGenCWFreqMHZ;
RFGenSweepSteps = objConfiguration.nFreqSpectrumSteps;
RFGenStopFrequencyMHZ = RFGenStartFrequencyMHZ + RFGenSweepSteps * RFGenStepFrequencyMHZ;
RFGenPowerON = objConfiguration.bRFEGenPowerON;
RFGenPowerLevel = objConfiguration.nRFEGenPowerLevel;
RFGenHighPowerSwitch = objConfiguration.bRFEGenHighPowerSwitch;
MaxFreqMHZ = 6000;
MinFreqMHZ = 23.438;
RFGenStepWaitMS = objConfiguration.nRFEGenSweepWaitMS;
OnReceivedConfigurationData(new EventArgs());
}
else
{
//spectrum analyzer
if ((Math.Abs(StartFrequencyMHZ - objConfiguration.fStartMHZ) >= 0.001) || (Math.Abs(StepFrequencyMHZ - objConfiguration.fStepMHZ) >= 0.001))
{
StartFrequencyMHZ = objConfiguration.fStartMHZ;
StepFrequencyMHZ = objConfiguration.fStepMHZ;
ReportLog("New Freq range - buffer cleared.");
}
AmplitudeTopDBM = objConfiguration.fAmplitudeTopDBM;
AmplitudeBottomDBM = objConfiguration.fAmplitudeBottomDBM;
FreqSpectrumSteps = objConfiguration.nFreqSpectrumSteps;
m_bExpansionBoardActive = objConfiguration.bExpansionBoardActive;
if (m_bExpansionBoardActive)
{
m_eActiveModel = m_eExpansionBoardModel;
if (ExpansionBoardModel == RFECommunicator.eModel.MODEL_WSUB3G)
{
//If it is a MODEL_WSUB3G, make sure we use the MAX HOLD mode to account for proper DSP
Thread.Sleep(500);
if (m_bUseMaxHold)
{
ReportLog("Updated remote mode to Max Hold for reliable DSP calculations with fast signals");
SendCommand_SetMaxHold();
}
else
{
ReportLog("Remote mode is not Max Hold, some fast signals may not be detected");
SendCommand_Realtime();
}
}
}
else
{
m_eActiveModel = m_eMainBoardModel;
}
m_eMode = objConfiguration.eMode;
MinFreqMHZ = objConfiguration.fMinFreqMHZ;
MaxFreqMHZ = objConfiguration.fMaxFreqMHZ;
MaxSpanMHZ = objConfiguration.fMaxSpanMHZ;
m_fRBWKHZ = objConfiguration.fRBWKHZ;
m_fOffset_dB = objConfiguration.fOffset_dB;
if ((m_eActiveModel == eModel.MODEL_2400) || (m_eActiveModel == eModel.MODEL_6G))
{
MinSpanMHZ = 2.0;
}
else
{
MinSpanMHZ = 0.112;
}
if (objConfiguration.nFreqSpectrumSteps == 13)
{
m_eMode = RFECommunicator.eMode.MODE_WIFI_ANALYZER;
}
else
{
m_eMode = RFECommunicator.eMode.MODE_SPECTRUM_ANALYZER;
}
OnReceivedConfigurationData(new EventArgs());
}
}
else if (objNew.GetType() == typeof(RFESweepData))
{
if (m_eMode == eMode.MODE_TRACKING)
{
if (m_bTrackingNormalizing)
{
if (m_SweepTrackingNormalizedContainer == null)
m_SweepTrackingNormalizedContainer = new RFESweepDataCollection(3,true);
RFESweepData objSweep=(RFESweepData)objNew;
m_SweepTrackingNormalizedContainer.Add(objSweep);
bool bWrongData=objSweep.GetAmplitudeDBM(objSweep.GetMinStep())<=MIN_AMPLITUDE_TRACKING_NORMALIZE;
if (bWrongData || ((m_nAutoStopSNATrackingCounter != 0) && (m_SweepTrackingNormalizedContainer.Count >= m_nAutoStopSNATrackingCounter)))
{
StopTracking();
if (bWrongData)
//invalid data, end so it can be restarted
m_SweepTrackingNormalized = objSweep;
else
//if all samples collected, end and get average among them
m_SweepTrackingNormalized = m_SweepTrackingNormalizedContainer.GetAverage(0, m_SweepTrackingNormalizedContainer.Count - 1);
OnUpdateDataTrakingNormalization(new EventArgs());
}
}
else
{
RFESweepData objSweep = (RFESweepData)objNew;
m_TrackingDataContainer.Add(objSweep);
bDraw = true;
OnUpdateDataTraking(new EventArgs());
if ((m_nAutoStopSNATrackingCounter != 0) && (m_nTrackingPass > m_nAutoStopSNATrackingCounter))
{
StopTracking();
}
}
}
else
{
if (!HoldMode)
{
RFESweepData objSweep = (RFESweepData)objNew;
m_SweepDataContainer.Add(objSweep);
bDraw = true;
if (m_SweepDataContainer.IsFull())
{
HoldMode = true;
OnUpdateFeedMode(new EventArgs());
ReportLog("RAM Buffer is full.");
}
m_sSweepInfoText = "Captured:" + objSweep.CaptureTime.ToString("yyyy-MM-dd HH:mm:ss\\.fff");
TimeSpan objSpan = new TimeSpan();
objSpan = objSweep.CaptureTime - m_LastCaptureTime;
if (objSpan.TotalSeconds < 60)
{
//if time between captures is less than 60 seconds, we can assume we are getting realtime data
//and therefore can provide average sweep/seconds information, otherwise we were in hold or something
//and data could not be used for these calculations.
m_nAverageSweepSpeedIterator++;
m_spanAverageSpeedAcumulator += (objSweep.CaptureTime - m_LastCaptureTime);
if (m_fAverageSweepTime > 0.0)
{
m_sSweepInfoText += "\nSweep time: " + m_fAverageSweepTime.ToString("0.000") + " seconds - Avg Sweeps/second: " + (1.0 / m_fAverageSweepTime).ToString("0.0");
}
if (m_nAverageSweepSpeedIterator >= 10)
{
m_fAverageSweepTime = m_spanAverageSpeedAcumulator.TotalSeconds / m_nAverageSweepSpeedIterator;
m_nAverageSweepSpeedIterator = 0;
m_spanAverageSpeedAcumulator = m_LastCaptureTime - m_LastCaptureTime; //set it to zero and start average all over again
}
}
m_LastCaptureTime = objSweep.CaptureTime;
OnUpdateData(new EventArgs());
}
else
{
//if in hold mode, we just record last time came here to make sure we start from most reliable point in time
m_LastCaptureTime = DateTime.Now;
}
}
}
else if (objNew.GetType() == typeof(RFEScreenData))
{
if ((CaptureRemoteScreen) && (m_ScreenDataContainer.IsFull() == false))
{
RFEScreenData objScreen = (RFEScreenData)objNew;
objScreen.Model = ActiveModel;
m_ScreenDataContainer.Add(objScreen);
ScreenIndex = (UInt16)m_ScreenDataContainer.UpperBound;
OnUpdateRemoteScreen(new EventArgs());
}
else
{
//receiving Screen Dump data but it was intended to be disabled, resend a disable command now
SendCommand("D0");
}
}
else
{
//received a string, so use it along to parse parameters
string sLine = (string)objNew;
sReceivedString = sLine;
if ((sLine.Length > 3) && (sLine.Substring(0, 4) == _Acknowldedge))
{
m_bAcknowledge = true;
}
else if ((sLine.Length > 16) && (sLine.Substring(0, 3) == "#Sn"))
{
m_sSerialNumber = sLine.Substring(3, 16);
ReportLog("Device serial number: " + SerialNumber);
}
else if((sLine.Length > 2) && (sLine.Substring(0, 2) == "$q"))
{
//calibration data
UInt16 nSize=Convert.ToUInt16(sLine[2]);
if (IsGenerator())
{
//signal generator uses a different approach for storing absolute amplitude value offset over an ideal -30dBm response
if ((m_arrSignalGeneratorEmbeddedCalibrationActual30DBM == null) || (m_arrSignalGeneratorEmbeddedCalibrationActual30DBM.Length != nSize))
{
m_arrSignalGeneratorEmbeddedCalibrationActual30DBM = new double[nSize];
for (int nInd = 0; nInd < nSize; nInd++)
{
m_arrSignalGeneratorEmbeddedCalibrationActual30DBM[nInd] = -30.0;
}
//Values using 10*delta from the value delivered when compared with 30dBm.
//For instance if value delivered for a frequency is -28.5dBm, that is a +1.5dB difference
//therefore a 1.5*10=15 value. If the value delivered is -33.2 that is a -3.2dB difference
//therefore a -32 value.
string sData = "Embedded calibration Signal Generator data received:";
for (int nInd = 0; nInd < nSize; nInd++)
{
m_arrSignalGeneratorEmbeddedCalibrationActual30DBM[nInd] = -30.0 + Convert.ToInt16(sLine[nInd + 3]) / 10.0;
sData += m_arrSignalGeneratorEmbeddedCalibrationActual30DBM[nInd].ToString();
if (nInd < nSize - 1)
sData += ",";
}
ReportLog(sData);
}
}
else
{
if ((m_arrSpectrumAnalyzerEmbeddedCalibrationOffsetDB == null) || (m_arrSpectrumAnalyzerEmbeddedCalibrationOffsetDB.Length != nSize))
{
m_arrSpectrumAnalyzerEmbeddedCalibrationOffsetDB = new float[nSize];
for (int nInd = 0; nInd < nSize; nInd++)
{
m_arrSpectrumAnalyzerEmbeddedCalibrationOffsetDB[nInd] = 0.0f;
}
}
if (m_eActiveModel == eModel.MODEL_6G)
{
string sData = "Embedded calibration Spectrum Analyzer data received:";
for (int nInd = POS_EMBEDDED_CALIBRATED_6G; nInd < nSize; nInd++)
{
int nVal = Convert.ToInt32(sLine[nInd + 3]);
if (nVal > 127)
nVal = -(256 - nVal); //get the right sign
m_arrSpectrumAnalyzerEmbeddedCalibrationOffsetDB[nInd] = nVal / 2.0f; //split by two to get dB
sData += m_arrSpectrumAnalyzerEmbeddedCalibrationOffsetDB[nInd].ToString();
if (nInd < nSize - 1)
sData += ",";
}
ReportLog(sData);
}
}
}
else if ((sLine.Length > 18) && (sLine.Substring(0, 18) == _ResetString))
{
//RF Explorer device was reset for some reason, reconfigure client based on new configuration
OnDeviceResetEvent(new EventArgs());
}
else if ((sLine.Length > 5) && sLine.Substring(0, 6) == "#C2-M:")
{
ReportLog("Received RF Explorer device model info:" + sLine);
m_eMainBoardModel = (eModel)Convert.ToUInt16(sLine.Substring(6, 3));
m_eExpansionBoardModel = (eModel)Convert.ToUInt16(sLine.Substring(10, 3));
m_sRFExplorerFirmware = (sLine.Substring(14, 5));
OnReceivedDeviceModel(new EventArgs());
}
else if ((sLine.Length > 5) && sLine.Substring(0, 6) == "#C3-M:")
{
ReportLog("Received RF Explorer Generator device info:" + sLine);
m_eMainBoardModel = (eModel)Convert.ToUInt16(sLine.Substring(6, 3));
m_eExpansionBoardModel = (eModel)Convert.ToUInt16(sLine.Substring(10, 3));
m_sRFExplorerFirmware = (sLine.Substring(14, 5));
OnReceivedDeviceModel(new EventArgs());
}
else if ((sLine.Length > 2) && sLine.Substring(0, 3) == "#K1")
{
ReportLog("RF Explorer is now in TRACKING mode.");
m_eMode = eMode.MODE_TRACKING;
}
else if ((sLine.Length > 2) && sLine.Substring(0, 3) == "#K0")
{
ReportLog("RF Explorer is now in ANALYZER mode.");
m_eMode = eMode.MODE_SPECTRUM_ANALYZER;
}
else if ((sLine.Length > 2) && (sLine.Substring(0, 2) == "$S") && (StartFrequencyMHZ > 0.1))
{
bWrongFormat = true;
}
#if SUPPORT_EXPERIMENTAL
else if ((sLine.Length > 2) && sLine.Substring(0, 2) == "$R")
{
if (!HoldMode && m_nRAWSnifferIndex < m_nTotalBufferSize)
{
if (m_arrRAWSnifferData == null)
{
//don't allocate memory for this object before actually required as most users may not need this
m_arrRAWSnifferData = new string[m_nTotalBufferSize];
}
m_nRAWSnifferIndex++;
if (m_nRAWSnifferIndex >= m_nTotalBufferSize)
{
m_nRAWSnifferIndex = m_nTotalBufferSize;
HoldMode = true;
UpdateFeedMode();
ReportLog("Buffer is full.");
}
else
{
m_arrRAWSnifferData[m_nRAWSnifferIndex] = sLine;
}
m_nMaxRAWSnifferIndex = m_nRAWSnifferIndex;
DrawRAWDecoder();
}
}
#endif
else if ((sLine.Length > 5) && (sLine.Substring(0, 6) == "#C2-F:"))
{
bWrongFormat = true; //parsed on the thread
}
else if ((sLine.Length > 5) && (sLine.Substring(0, 6) == "#C1-F:"))
{
bWrongFormat = true; //obsolete firmware
}
else
{
ReportLog(sLine); //report any line we don't understand - it is likely a human readable message
}
if (bWrongFormat)
{
ReportLog("Received unexpected data from RFExplorer device:" + sLine);
ReportLog("Please update your RF Explorer to a recent firmware version and");
ReportLog("make sure you are using the latest version of RF Explorer for Windows.");
ReportLog("Visit http://www.rf-explorer/download for latest firmware updates.");
OnWrongFormatData(new EventArgs());
}
}
} while (bProcessAllEvents && (m_arrReceivedData.Count > 0));
}
catch (Exception obEx)
{
ReportLog("ProcessReceivedString: " + sReceivedString + Environment.NewLine + obEx.ToString());
}
return bDraw;
}
protected void Page_Load(object sender, EventArgs e)
{
string auth = "";
if (1 == 1)
{
if (Request.Headers["auth"] == null)
{
eJson ErrJson = new eJson();
ErrJson.Add("errcode", "1");
ErrJson.Add("message", "未携带eToKen");
eBase.WriteJson(ErrJson);
}
auth = Request.Headers["auth"].ToString();
#region 日志
if (1 == 1)
{
eTable etb = new eTable("a_eke_sysErrors");
etb.Fields.Add("Message", "auth");
etb.Fields.Add("StackTrace", auth);
etb.Add();
}
#endregion
}
else
{
auth = "06841095ADDB705B76053D24C19BF707ED46C19D50CD552953B29A5B52A40AAD35CD1D9B25C640205D2767CA2C4A97F0A2B98CC48242454E00040655734261D6BFBE7CED29CA8AF766721AEA61ED411113CA840E5959FBCC0002BAB64731467E8705BAB1267CE992C2785DAE905F84C8B54C352C3D87C5D20D2C09DE7DC3F542E2AC6A66D8D1021E4E58051851C86871";
}
eToken token = new eToken(auth);
eUser user = new eUser(token);
eModel model = new eModel(ModelID, user);
model.Ajax = true;
model.Mode = "WebAPI";
switch (model.Action.Value)
{
case "":
model.WebAPIList();
break;
case "edit":
model.WebAPIEdit();
break;
case "view":
model.WebAPIView();
break;
case "save":
model.WebAPISave();
break;
case "del":
model.WebAPIDelete();
break;
}
eBase.End();
}
protected void Page_Load(object sender, EventArgs e)
{
eUser user = new eUser(UserArea);
model = new eModel(ModelID, user);
//model.Ajax = true; //默认为false
switch (model.Action.Value)
{
case "delmore": //批量删除
string ids = eParameters.QueryString("ids");
ids = "'" + ids.Replace(",", "','") + "'";
eTable etb = new eTable(model.eForm.TableName, user);
etb.Where.Add(model.eForm.primaryKey + " in (" + ids + ")");
etb.DeleteTrue();
Response.Redirect(Request.UrlReferrer.PathAndQuery, true);
break;
case "":
LitBody.Text = model.getListHTML();
break;
case "add":
LitBody.Text = model.getAddHTML();
break;
case "edit":
LitBody.Text = model.getEditHTML();
break;
case "copy":
LitBody.Text = model.getEditHTML();
break;
case "view":
LitBody.Text = model.getViewHTML();
break;
case "print":
eBase.Write(model.getPrintHTML());
eBase.End();
break;
case "save":
model.Save();
break;
case "del":
model.Delete();
break;
case "addsub":
eBase.Write(model.getAddHTML());
eBase.End();
break;
case "viewsub":
eBase.Write(model.getViewHTML());
eBase.End();
break;
case "export":
model.ExportExcel();
break;
case "getrole":
string roleid = eParameters.QueryString("roleid");
DataTable rolePower = eBase.getUserPowerDefault(roleid, "", "");
eJson json = new eJson(rolePower);
json.Convert = true;
eBase.Write(json.ToString());
Response.End();
break;
}
}
protected void Page_Load(object sender, EventArgs e)
{
if (Request.QueryString["ajaxget"] != null)
{
Ajaxget = Convert.ToBoolean(Request.QueryString["ajaxget"]);
}
eUser user = new eUser(UserArea);
model = new eModel(ModelID, user);
//model.Ajax = true; //默认为false
switch (model.Action.Value)
{
case "":
LitBody.Text = model.getListHTML();
break;
case "add":
LitBody.Text = model.getAddHTML();
break;
case "edit":
LitBody.Text = model.getEditHTML();
break;
case "copy":
LitBody.Text = model.getEditHTML();
break;
case "view":
LitBody.Text = model.getViewHTML();
break;
case "print":
eBase.Write(model.getPrintHTML());
eBase.End();
break;
case "save":
model.Save();
break;
case "del":
model.Delete();
break;
case "addsub":
eBase.Write(model.getAddHTML());
eBase.End();
break;
case "viewsub":
eBase.Write(model.getViewHTML());
eBase.End();
break;
case "export":
model.ExportExcel();
break;
case "getrole":
string roleid = eParameters.QueryString("roleid");
DataTable rolePower = eBase.getUserPowerDefault(roleid, "", "");
eJson json = new eJson(rolePower);
json.Convert = true;
eBase.Write(json.ToString());
Response.End();
break;
}
}
