protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
Point3d basePt;
Result rc = RhinoGet.GetPoint("Start of line", false, out basePt);
if (rc != Result.Success)
{
return(rc);
}
GetPoint gp = new GetPoint();
gp.SetCommandPrompt("End of line");
gp.SetBasePoint(basePt, true);
gp.DrawLineFromPoint(basePt, true);
gp.DynamicDraw += new EventHandler <GetPointDrawEventArgs>(gp_DynamicDraw);
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
Point3d endPt = gp.Point();
Rhino.Geometry.Vector3d vector = endPt - basePt;
if (vector.Length > doc.ModelAbsoluteTolerance)
{
Line line = new Line(basePt, endPt);
doc.Objects.AddLine(line);
doc.Views.Redraw();
}
return(Result.Success);
}
public static Result GetAngle(RhinoDoc doc)
{
var gp = new GetPoint();
gp.SetCommandPrompt("Base point");
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
var base_point = gp.Point();
gp.SetCommandPrompt("First reference point");
gp.DrawLineFromPoint(base_point, true);
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
var first_point = gp.Point();
double angle_radians;
var rc = RhinoGet.GetAngle("Second reference point", base_point, first_point, 0, out angle_radians);
if (rc == Result.Success)
{
RhinoApp.WriteLine("Angle = {0} degrees", RhinoMath.ToDegrees(angle_radians));
}
return(rc);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
Point3d base_pt;
var rc = RhinoGet.GetPoint("Start of line", false, out base_pt);
if (rc != Result.Success)
{
return(rc);
}
var gp = new GetPoint();
gp.SetCommandPrompt("End of line");
gp.SetBasePoint(base_pt, true);
gp.DrawLineFromPoint(base_pt, true);
gp.DynamicDraw += gp_DynamicDraw;
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
var end_pt = gp.Point();
var vector = end_pt - base_pt;
if (vector.Length > doc.ModelAbsoluteTolerance)
{
var line = new Line(base_pt, end_pt);
doc.Objects.AddLine(line);
doc.Views.Redraw();
}
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
var go = new GetObject();
go.SetCommandPrompt("Select grips to move");
go.GeometryFilter = ObjectType.Grip;
go.EnablePreSelect(true, true);
go.GetMultiple(1, 0);
if (go.CommandResult() != Result.Success)
{
return(go.CommandResult());
}
var gp = new GetPoint();
gp.SetCommandPrompt("Point to move from");
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
var from = gp.Point();
gp.SetCommandPrompt("Point to move to");
gp.SetBasePoint(from, true);
gp.DrawLineFromPoint(from, true);
gp.Get();
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
var to = gp.Point();
var dir = to - from;
if (dir.IsTiny(doc.ModelAbsoluteTolerance))
{
return(Result.Nothing);
}
var xform = Transform.Translation(dir);
var helper = new SampleCsGripHelper(doc);
helper.AddGripObjects(go);
helper.TransformAndUpdate(xform);
doc.Views.Redraw();
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
ObjRef objref;
var rc = RhinoGet.GetOneObject("Select object to move", false, ObjectType.AnyObject, out objref);
if (rc != Result.Success)
{
return(rc);
}
if (null == objref)
{
return(Result.Failure);
}
Point3d first_point;
rc = RhinoGet.GetPoint("Point to move from", false, out first_point);
if (rc != Result.Success)
{
return(rc);
}
var gp = new GetPoint();
gp.SetCommandPrompt("Point to move to");
gp.SetBasePoint(first_point, true);
gp.DrawLineFromPoint(first_point, true);
gp.Get();
rc = gp.CommandResult();
if (rc != Result.Success)
{
return(rc);
}
var second_point = gp.Point();
var dir = second_point - first_point;
if (dir.Length > RhinoMath.ZeroTolerance)
{
var xform = Transform.Translation(dir);
doc.Objects.Transform(objref, xform, true);
doc.Views.Redraw();
}
return(rc);
}
protected override Result RunCommand(Rhino.RhinoDoc doc, RunMode mode)
{
#if IncludeSample
// TODO: start here modifying the behaviour of your command.
// ---
RhinoApp.WriteLine("The {0} command will add a line right now.", EnglishName);
Point3d pt0;
using (GetPoint getPointAction = new GetPoint())
{
getPointAction.SetCommandPrompt("Please select the start point");
if (getPointAction.Get() != GetResult.Point)
{
RhinoApp.WriteLine("No start point was selected.");
return(getPointAction.CommandResult());
}
pt0 = getPointAction.Point();
}
Point3d pt1;
using (GetPoint getPointAction = new GetPoint())
{
getPointAction.SetCommandPrompt("Please select the end point");
getPointAction.SetBasePoint(pt0, true);
getPointAction.DrawLineFromPoint(pt0, true);
if (getPointAction.Get() != GetResult.Point)
{
RhinoApp.WriteLine("No end point was selected.");
return(getPointAction.CommandResult());
}
pt1 = getPointAction.Point();
}
doc.Objects.AddLine(pt0, pt1);
doc.Views.Redraw();
RhinoApp.WriteLine("The {0} command added one line to the document.", EnglishName);
return(Result.Success);
#else
// TODO: start here modifying the behaviour of your command.
return(Result.Success);
#endif
}
protected override Result RunCommand(Rhino.RhinoDoc doc, RunMode mode)
{
// TODO: start here modifying the behaviour of your command.
// ---
RhinoApp.WriteLine("The {0} command will add a line right now.", EnglishName);
Point3d pt0;
using (GetPoint getPointAction = new GetPoint())
{
getPointAction.SetCommandPrompt("Please select the start point");
if (getPointAction.Get() != GetResult.Point)
{
RhinoApp.WriteLine("No start point was selected.");
return(getPointAction.CommandResult());
}
pt0 = getPointAction.Point();
}
Point3d pt1;
using (GetPoint getPointAction = new GetPoint())
{
getPointAction.SetCommandPrompt("Please select the end point");
getPointAction.SetBasePoint(pt0, true);
getPointAction.DrawLineFromPoint(pt0, true);
if (getPointAction.Get() != GetResult.Point)
{
RhinoApp.WriteLine("No end point was selected.");
return(getPointAction.CommandResult());
}
pt1 = getPointAction.Point();
}
Rhino.Geometry.Line line1 = new Line(pt0, pt1);
doc.Objects.AddLine(line1);
doc.Views.Redraw();
RhinoApp.WriteLine("The {0} command added one line to the document.", EnglishName);
RhinoApp.WriteLine("The distance between the two points is {0} {1}.", line1.Length, doc.ModelUnitSystem.ToString().ToLower());
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
ObjRef[] obj_refs;
var rc = RhinoGet.GetMultipleObjects("Select points to move", false, ObjectType.Point, out obj_refs);
if (rc != Result.Success || obj_refs == null)
{
return(rc);
}
var gp = new GetPoint();
gp.SetCommandPrompt("Point to move from");
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
var start_point = gp.Point();
gp.SetCommandPrompt("Point to move to");
gp.SetBasePoint(start_point, false);
gp.DrawLineFromPoint(start_point, true);
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
var end_point = gp.Point();
var xform = Transform.Translation(end_point - start_point);
foreach (var obj_ref in obj_refs)
{
doc.Objects.Transform(obj_ref, xform, true);
}
doc.Views.Redraw();
return(Result.Success);
}
public static Result Ortho(RhinoDoc doc)
{
var gp = new GetPoint();
gp.SetCommandPrompt("Start of line");
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
var start_point = gp.Point();
var original_ortho = ModelAidSettings.Ortho;
if (!original_ortho)
{
ModelAidSettings.Ortho = true;
}
gp.SetCommandPrompt("End of line");
gp.SetBasePoint(start_point, false);
gp.DrawLineFromPoint(start_point, true);
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
var end_point = gp.Point();
if (ModelAidSettings.Ortho != original_ortho)
{
ModelAidSettings.Ortho = original_ortho;
}
doc.Objects.AddLine(start_point, end_point);
doc.Views.Redraw();
return(Result.Success);
}
private static Result GetTolerance(ref double tolerance)
{
var gp = new GetPoint();
gp.SetCommandPrompt("Tolerance");
gp.SetDefaultNumber(tolerance);
gp.AcceptNumber(true, false);
for (; ;)
{
var res = gp.Get();
if (res == GetResult.Number)
{
var d = gp.Number();
if (d < 0.0)
{
RhinoApp.WriteLine("Tolerance must be greater than 0.");
}
else
{
tolerance = d;
return(Result.Success);
}
}
if (res != GetResult.Point)
{
return(Result.Cancel);
}
break;
}
var base_point = gp.Point();
gp.SetBasePoint(base_point, true);
gp.DrawLineFromPoint(base_point, true);
gp.DynamicDrawColor = Rhino.ApplicationSettings.AppearanceSettings.TrackingColor;
for (; ;)
{
var res = gp.Get();
if (res == GetResult.Number)
{
var d = gp.Number();
if (d < 0.0)
{
RhinoApp.WriteLine("Tolerance must be greater than 0.");
}
else
{
tolerance = d;
return(Result.Success);
}
}
if (res != GetResult.Point)
{
return(Result.Cancel);
}
break;
}
tolerance = base_point.DistanceTo(gp.Point());
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
var go = new GetObject();
go.SetCommandPrompt("Select curve to intersect");
go.GeometryFilter = ObjectType.Curve;
go.Get();
if (go.CommandResult() != Result.Success)
{
return(go.CommandResult());
}
var curve = go.Object(0).Curve();
if (null == curve)
{
return(Result.Failure);
}
var gp = new GetPoint();
gp.SetCommandPrompt("First point of infinite intersecting line");
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
var from = gp.Point();
gp.SetCommandPrompt("Second point of infinite intersecting line");
gp.SetBasePoint(from, true);
gp.DrawLineFromPoint(from, true);
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
var line = new Rhino.Geometry.Line(from, gp.Point());
if (!line.IsValid || line.Length < Rhino.RhinoMath.SqrtEpsilon)
{
return(Result.Nothing);
}
var ccx = IntersectCurveLine(curve, line, doc.ModelAbsoluteTolerance, doc.ModelAbsoluteTolerance);
if (null != ccx)
{
foreach (var x in ccx)
{
if (x.IsPoint)
{
doc.Objects.AddPoint(x.PointA);
}
}
doc.Views.Redraw();
}
return(Result.Success);
}
public static Result ContourCurves(RhinoDoc doc)
{
var filter = ObjectType.Surface | ObjectType.PolysrfFilter | ObjectType.Mesh;
ObjRef[] obj_refs;
var rc = RhinoGet.GetMultipleObjects("Select objects to contour", false, filter, out obj_refs);
if (rc != Result.Success)
{
return(rc);
}
var gp = new GetPoint();
gp.SetCommandPrompt("Contour plane base point");
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
var base_point = gp.Point();
gp.DrawLineFromPoint(base_point, true);
gp.SetCommandPrompt("Direction perpendicular to contour planes");
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
var end_point = gp.Point();
if (base_point.DistanceTo(end_point) < RhinoMath.ZeroTolerance)
{
return(Result.Nothing);
}
double distance = 1.0;
rc = RhinoGet.GetNumber("Distance between contours", false, ref distance);
if (rc != Result.Success)
{
return(rc);
}
var interval = Math.Abs(distance);
Curve[] curves = null;
foreach (var obj_ref in obj_refs)
{
var geometry = obj_ref.Geometry();
if (geometry == null)
{
return(Result.Failure);
}
if (geometry is Brep)
{
curves = Brep.CreateContourCurves(geometry as Brep, base_point, end_point, interval);
}
else
{
curves = Mesh.CreateContourCurves(geometry as Mesh, base_point, end_point, interval);
}
foreach (var curve in curves)
{
var curve_object_id = doc.Objects.AddCurve(curve);
doc.Objects.Select(curve_object_id);
}
}
if (curves != null)
{
doc.Views.Redraw();
}
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
//pick objects to expand
Rhino.Input.Custom.GetObject go = new Rhino.Input.Custom.GetObject();
go.SetCommandPrompt("Select objects to expand");
go.GroupSelect = true;
go.SubObjectSelect = false;
go.EnableClearObjectsOnEntry(false);
go.EnableUnselectObjectsOnExit(false);
go.DeselectAllBeforePostSelect = false;
go.GetMultiple(1, 0);
//Compute center
Point3d centersAdd = new Point3d();
for (int i = 0; i < go.ObjectCount; i++)
{
BoundingBox bbObj = go.Object(i).Geometry().GetBoundingBox(true);
Point3d bbObjCenter = bbObj.Center;
centers.Add(bbObjCenter);
centersAdd += bbObjCenter;
Rhino.DocObjects.ObjRef objref = go.Object(i);
// get selected surface object
Rhino.DocObjects.RhinoObject obj = objref.Object();
goList.Add(obj);
}
Point3d allCenter = centersAdd / centers.Count;
//pick center
GetPoint gp = new GetPoint();
gp.SetCommandPrompt("Basepoint. Press Enter for automatic.");
gp.AcceptNothing(true);
var resgp = gp.Get();
if (resgp == GetResult.Nothing)
{
scaleCenter = allCenter;
}
else
{
scaleCenter = gp.Point();
}
//Expansion factor
GetPoint gp2 = new GetPoint();
gp2.SetCommandPrompt("Expansion factor or first reference point <" + factor + ">");
gp2.DrawLineFromPoint(scaleCenter, true);
gp2.AcceptNumber(true, true);
GetResult gr = gp2.Get();
Rhino.Display.RhinoView view = gp2.View();
plane2D = view.ActiveViewport.ConstructionPlane();
if (gr == GetResult.Number)
{
factor = gp2.Number();
}
if (gr == GetResult.Point)
{
scaleRefPoint = gp2.Point();
Line line1 = new Line(scaleCenter, scaleRefPoint);
Guid tempLine = doc.Objects.AddLine(line1);
Guid tempPoint = doc.Objects.AddPoint(scaleRefPoint);
if (scaleCenter == gp2.Point())
{
return(Rhino.Commands.Result.Cancel);
}
GetPoint gp3 = new GetPoint();
gp3.SetCommandPrompt("Secondt reference point");
gp3.AddOptionList("ScaleDimension", dimensions, 0);
gp3.DrawLineFromPoint(scaleCenter, true);
gp3.DynamicDraw += RefObjDraw;
while (true)
{
GetResult res = gp3.Get();
if (res == GetResult.Option)
{
dimensionIndex = gp3.Option().CurrentListOptionIndex;
continue;
}
else if (res == GetResult.Point)
{
Point3d scaleRefPoint2 = gp3.Point();
factor = (scaleCenter.DistanceTo(scaleRefPoint2)) / (scaleCenter.DistanceTo(scaleRefPoint));
doc.Objects.Delete(tempLine, true);
doc.Objects.Delete(tempPoint, true);
}
break;
}
}
RhinoApp.WriteLine("Expantion factor: " + factor);
//Compute translation
//Translate 3d
if (dimensionIndex == 0)
{
for (int i = 0; i < go.ObjectCount; i++)
{
Vector3d vec = (centers[i] - scaleCenter) * (factor - 1);
var xform = Transform.Translation(vec);
doc.Objects.Transform(go.Object(i), xform, true);
}
}
//Translate 2d
else if (dimensionIndex == 1)
{
for (int i = 0; i < go.ObjectCount; i++)
{
Rhino.Geometry.Vector3d vec = (centers[i] - scaleCenter) * (factor - 1);
Vector3d planeNormal = plane2D.Normal;
if (planeNormal[0] != 0)
{
vec.X = 0;
}
else if (planeNormal[1] != 0)
{
vec.Y = 0;
}
else if (planeNormal[2] != 0)
{
vec.Z = 0;
}
var xform = Rhino.Geometry.Transform.Translation(vec);
doc.Objects.Transform(go.Object(i), xform, true);
}
}
//Translate 1d
else if (dimensionIndex == 2)
{
for (int i = 0; i < go.ObjectCount; i++)
{
Vector3d vecEach = (centers[i] - scaleCenter);
double vecEachLength = vecEach.Length * (factor - 1);
Vector3d vec = (scaleRefPoint - scaleCenter);
double angleVec = Vector3d.VectorAngle(vecEach, vec);
int pol = 1;
if (angleVec > 1.57)
{
pol = -1;
}
vec.Unitize();
vec = vec * vecEachLength * pol;
var xform = Transform.Translation(vec);
doc.Objects.Transform(go.Object(i), xform, true);
}
}
goList = new List <Object>();
centers = new List <Point3d>();
dimensionIndex = 0;
plane2D = new Plane();
doc.Views.Redraw();
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
if (m_draw_conduit != null)
{
RhinoApp.WriteLine("Turn off existing arrowhead conduit");
m_draw_conduit.Enabled = false;
m_draw_conduit = null;
}
else
{
// get arrow head size
var go = new GetOption();
go.SetCommandPrompt("ArrowHead length in screen size (pixels) or world size (percentage of arrow length)?");
go.AddOption("screen");
go.AddOption("world");
go.Get();
if (go.CommandResult() != Result.Success)
{
return(go.CommandResult());
}
int screen_size = 0;
double world_size = 0.0;
if (go.Option().EnglishName == "screen")
{
var gi = new GetInteger();
gi.SetLowerLimit(0, true);
gi.SetCommandPrompt("Length of arrow head in pixels");
gi.Get();
if (gi.CommandResult() != Result.Success)
{
return(gi.CommandResult());
}
screen_size = gi.Number();
}
else
{
var gi = new GetInteger();
gi.SetLowerLimit(0, true);
gi.SetUpperLimit(100, false);
gi.SetCommandPrompt("Length of arrow head in percentage of total arrow length");
gi.Get();
if (gi.CommandResult() != Result.Success)
{
return(gi.CommandResult());
}
world_size = gi.Number() / 100.0;
}
// get arrow start and end points
var gp = new GetPoint();
gp.SetCommandPrompt("Start of line");
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
var start_point = gp.Point();
gp.SetCommandPrompt("End of line");
gp.SetBasePoint(start_point, false);
gp.DrawLineFromPoint(start_point, true);
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
var end_point = gp.Point();
var v = end_point - start_point;
if (v.IsTiny(Rhino.RhinoMath.ZeroTolerance))
{
return(Result.Nothing);
}
var line = new Line(start_point, end_point);
m_draw_conduit = new DrawArrowHeadsConduit(line, screen_size, world_size);
// toggle conduit on/off
m_draw_conduit.Enabled = true;
RhinoApp.WriteLine("Draw arrowheads conduit enabled.");
}
doc.Views.Redraw();
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
var myTypes = ObjectType.AnyObject ^ ObjectType.BrepLoop;
//pick objects to expand
Rhino.Input.Custom.GetObject go = new Rhino.Input.Custom.GetObject();
go.SetCommandPrompt("Select objects to scale");
go.GeometryFilter = myTypes;
//go.GroupSelect = true;
go.SubObjectSelect = true;
//go.EnableClearObjectsOnEntry(false);
//go.EnableUnselectObjectsOnExit(false);
//go.DeselectAllBeforePostSelect = false;
go.GetMultiple(1, 0);
//Compute center
Point3d centersAdd = new Point3d();
for (int i = 0; i < go.ObjectCount; i++)
{
BoundingBox bbObj = go.Object(i).Geometry().GetBoundingBox(true);
Point3d bbObjCenter = bbObj.Center;
centers.Add(bbObjCenter);
centersAdd += bbObjCenter;
Rhino.DocObjects.ObjRef objref = go.Object(i);
// get selected surface object
Rhino.DocObjects.RhinoObject obj = objref.Object();
dynRef.Add(objref);
}
Point3d allCenter = centersAdd / centers.Count;
//pick center
GetPoint gp = new GetPoint();
gp.SetCommandPrompt("Basepoint. Press Enter for automatic.");
gp.AcceptNothing(true);
var resgp = gp.Get();
if (resgp == GetResult.Nothing)
{
scaleCenter = allCenter;
}
else
{
scaleCenter = gp.Point();
}
Rhino.Display.RhinoView view = gp.View();
plane2D = view.ActiveViewport.ConstructionPlane();
//Expansion factor
GetPoint gp2 = new GetPoint();
gp2.SetCommandPrompt("Scale factor or first reference point <" + factor + ">");
gp2.DrawLineFromPoint(scaleCenter, true);
gp2.AcceptNumber(true, true);
GetResult gr = gp2.Get();
if (gr == GetResult.Number)
{
factor = gp2.Number();
}
if (gr == GetResult.Point)
{
scaleRefPoint = gp2.Point();
Line line1 = new Line(scaleCenter, scaleRefPoint);
Guid tempLine = doc.Objects.AddLine(line1);
Guid tempPoint = doc.Objects.AddPoint(scaleRefPoint);
if (scaleCenter == gp2.Point())
{
return(Rhino.Commands.Result.Cancel);
}
GetPoint gp3 = new GetPoint();
gp3.SetCommandPrompt("Secondt reference point");
gp3.AddOptionList("ScaleDimension", dimensions, 0);
gp3.DrawLineFromPoint(scaleCenter, true);
gp3.DynamicDraw += RefObjDraw;
while (true)
{
GetResult res = gp3.Get();
if (res == GetResult.Option)
{
dimensionIndex = gp3.Option().CurrentListOptionIndex;
continue;
}
else if (res == GetResult.Point)
{
Point3d scaleRefPoint2 = gp3.Point();
factor = (scaleCenter.DistanceTo(scaleRefPoint2)) / (scaleCenter.DistanceTo(scaleRefPoint));
doc.Objects.Delete(tempLine, true);
doc.Objects.Delete(tempPoint, true);
}
break;
}
}
RhinoApp.WriteLine("Scale factor: " + factor);
//Compute translation
//Translate 3d
if (dimensionIndex == 0)
{
for (int i = 0; i < go.ObjectCount; i++)
{
var xform = Transform.Scale(centers[i], factor);
var objref = go.Object(i);
var brep = objref.Brep();
var index = objref.GeometryComponentIndex.Index;
if (index > 0)
{
brep.TransformComponent(new[] { objref.GeometryComponentIndex }, xform, doc.ModelAbsoluteTolerance, 0, true);
doc.Objects.Replace(objref.ObjectId, brep);
}
else
{
doc.Objects.Transform(go.Object(i), xform, true);
}
}
}
//Translate 2d
else if (dimensionIndex == 1)
{
for (int i = 0; i < go.ObjectCount; i++)
{
plane2D.Origin = centers[i];
var xform = Rhino.Geometry.Transform.Scale(plane2D, factor, factor, 1);
var objref = go.Object(i);
var brep = objref.Brep();
var index = objref.GeometryComponentIndex.Index;
if (index > 0)
{
brep.TransformComponent(new[] { objref.GeometryComponentIndex }, xform, doc.ModelAbsoluteTolerance, 0, true);
doc.Objects.Replace(objref.ObjectId, brep);
}
else
{
doc.Objects.Transform(go.Object(i), xform, true);
}
}
}
//Translate 1d
else if (dimensionIndex == 2)
{
for (int i = 0; i < go.ObjectCount; i++)
{
Vector3d vec = (scaleRefPoint - scaleCenter);
Plane scalePlane = new Plane(centers[i], vec);
var xform = Transform.Scale(scalePlane, 1, 1, factor);
var objref = go.Object(i);
var brep = objref.Brep();
var index = objref.GeometryComponentIndex.Index;
if (index > 0)
{
brep.TransformComponent(new[] { objref.GeometryComponentIndex }, xform, doc.ModelAbsoluteTolerance, 0, true);
doc.Objects.Replace(objref.ObjectId, brep);
}
else
{
doc.Objects.Transform(go.Object(i), xform, true);
}
}
}
centers = new List <Point3d>();
dimensionIndex = 0;
plane2D = new Plane();
dynRef = new List <Rhino.DocObjects.ObjRef>();
doc.Views.Redraw();
return(Result.Success);
}