// Create signal from samples repeated 100 times

float[] samples = new [] { 0.5f, 0.2f, -0.3f, 1.2f, 1.6f, -1.8f, 0.3f, -0.2f };

var s = new DiscreteSignal(8000, samples).Repeat(100);

var length = s.Length;
var duration = s.Duration;

var echoSignal = s + s.Delay(50);

var marginSignal = s.First(64).Concatenate(s.Last(64));

var repeatMiddle = s[400, 500].Repeat(10);

var mean = s.Samples.Average();
var sigma = s.Samples.Average(x => (x - mean) * (x - mean));

var normSignal = s - mean;
normSignal.Attenuate(sigma);

DiscreteSignal sinusoid = 
    new SineBuilder()
        .SetParameter("frequency", 500.0/*Hz*/)
        .SetParameter("phase", Math.PI / 6)
        .OfLength(1000)
        .SampledAt(44100/*Hz*/)
        .Build();

DiscreteSignal noise = 
    new RedNoiseBuilder()
        .SetParameter("min", -2.5)
        .SetParameter("max", 2.5)
        .OfLength(800)
        .SampledAt(44100)
        .DelayedBy(200)
        .Build();

DiscreteSignal noisy = 
    new SineBuilder()
        .SetParameter("min", -10.0)
        .SetParameter("max", 10.0)
        .SetParameter("freq", 1200.0/*Hz*/)
        .OfLength(1000)
        .SampledAt(44100)
        .SuperimposedWith(noise)
        .Build();

SignalBuilder lfo = 
    new TriangleWaveBuilder()
            .SetParameter("min", 100)
            .SetParameter("max", 1500)
            .SetParameter("frequency", 2.0/*Hz*/)
            .SampledAt(16000/*Hz*/);

//while (...)
{
    var sample = lfo.NextSample();
    //...
}

DiscreteSignal left, right;

// load

using (var stream = new FileStream("sample.wav", FileMode.Open))
{
    var waveFile = new WaveFile(stream);
    left = waveFile[Channels.Left];
    right = waveFile[Channels.Right];
}

// save

using (var stream = new FileStream("saved_mono.wav", FileMode.Create))
{
	var waveFile = new WaveFile(left);
	waveFile.SaveTo(stream);
}

using (var stream = new FileStream("saved_stereo.wav", FileMode.Create))
{
    var waveFile = new WaveFile(new [] { left, right });
    waveFile.SaveTo(stream);
}

// For each transform there's a corresponding transformer object.
// Each transformer object has Direct() and Inverse() methods.

// Complex FFT transformer:

var fft = new Fft(1024);

float[] real = signal.First(1024).Samples;
float[] imag = new float [1024];

// in-place FFT
fft.Direct(real, imag);

// ...do something with real and imaginary parts of the spectrum...

// in-place IFFT
fft.Inverse(real, imag);

// post-processed FFT:

var magnitudeSpectrum = 
    fft.MagnitudeSpectrum(signal[1000, 2024]);

var powerSpectrum = 
    fft.PowerSpectrum(signal.First(1024), normalize: false);

var logPowerSpectrum = 
    fft.PowerSpectrum(signal.Last(1024))
       .Samples
       .Select(s => Scale.ToDecibel(s))
       .ToArray();


// Short-Time Fourier Transform:

var stft = new Stft(1024, 256, WindowTypes.Hamming);
var timefreq = stft.Direct(signal);
var reconstructed = stft.Inverse(timefreq);

var spectrogram = stft.Spectrogram(signal);


// Cepstral transformer:

var ct = new CepstralTransform(24, fftSize: 512);
var cepstrum = ct.Direct(signal);

// convolution

var conv = Operation.Convolve(signal, kernel);
var xcorr = Operation.CrossCorrelate(signal1, signal2);

// block convolution

var filtered = Operation.BlockConvolve(signal, kernel, 4096, FilteringMethod.OverlapAdd);

// resampling

var resampled = Operation.Resample(signal, 22050);
var interpolated = Operation.Interpolate(signal, 3);
var decimated = Operation.Decimate(signal, 2);
var updown = Operation.ResampleUpDown(signal, 3, 2);

// time scale modification

var stretch = Operation.TimeStretch(signal, 0.7, TsmAlgorithm.PhaseVocoderPhaseLocking);
var cool = Operation.TimeStretch(signal, 16, TsmAlgorithm.PaulStretch);

// envelope following

var envelope = Operation.Envelope(signal);

// rectification

var halfRect = Operation.HalfRectify(signal);
var fullRect = Operation.FullRectify(signal);

// spectral subtraction

var clean = Operation.SpectralSubtract(signal, noise);

var maFilter = new MovingAverageFilter(7);
var smoothedSignal = maFilter.ApplyTo(signal);

var frequency = 800.0/*Hz*/;
var notchFilter = new BiQuad.NotchFilter(frequency / signal.SamplingRate);
var notchedSignal = notchFilter.ApplyTo(signal);


// filter analysis:

var filter = new IirFilter(new [] { 1, 0.5, 0.2 }, new [] { 1, -0.8, 0.3 });

var impulseResponse = filter.ImpulseResponse();
var magnitudeResponse = filter.FrequencyResponse().Magnitude;
var phaseResponse = filter.FrequencyResponse().Phase;

var transferFunction = lowPassFilter.Tf;

var b = transferFunction.Numerator;
var a = transferFunction.Denominator;
var zeros = transferFunction.Zeros;
var poles = transferFunction.Poles;

var gd = transferFunction.GroupDelay();
var pd = transferFunction.PhaseDelay();


// some filter design:

var lpFilter = DesignFilter.FirLp(345, 0.15f);

// HP filter can be obtained from LP with the same cutoff frequency:
var hpFilter = DesignFilter.LpToHp(lpFilter);

// and vice versa:
var lowpass  = DesignFilter.HpToLp(hpFilter);

// design BP filter
var bpFilter = DesignFilter.FirBp(123, 0.05f, 0.15f);

// design BR filter
var brFilter = DesignFilter.FirBr(201, 0.08f, 0.23f, WindowTypes.Kaiser);

var kernel = lowpass.Tf.Numerator;


// sequence of filters:

var cascade = filter * firFilter * notchFilter;
var filtered = cascade.ApplyTo(signal);

// equivalent to:

var filtered = filter.ApplyTo(signal);
filtered = firFilter.ApplyTo(filtered);
filtered = notchFilter.ApplyTo(filtered);


// parallel combination of filters:

var parallel = filter1 + filter2;
filtered = parallel.ApplyTo(signal);


// audio effects:

var pitchShift = new PitchShiftEffect(signal.SamplingRate, 1.2);
var wahwah = new WahwahEffect(signal.SamplingRate,, lfoFrequency: 2/*Hz*/);

var processed = wahwah.ApplyTo(pitchShift.ApplyTo(signal));

float[] output;

...

void NewChunkAvailable(float[] chunk)
{
    filter.Process(chunk, output);
}

var outputSample = filter.Process(sample);

// Overlap-Add / Overlap-Save

FirFilter filter = new FirFilter(kernel);

var blockConvolver = OlaBlockConvolver.FromFilter(filter, 4096);

// processing loop:
// while new input sample is available
{
    var outputSample = blockConvolver.Process(sample);
}

// or:
// while new input buffer is available
{
    blockConvolver.Process(input, output);
}

var sr = signal.SamplingRate;

var lpcExtractor = new LpcExtractor(sr, 16, frameSize: 0.032/*sec*/, hopSize: 0.015/*sec*/);
var lpcVectors = lpcExtractor.ComputeFrom(signal).Take(15);


var mfccExtractor = new MfccExtractor(sr, 13, filterbankSize: 24, preEmphasis: 0.95);
var mfccVectors = mfccExtractor.ParallelComputeFrom(signal);

// equivalent to:

var mfccExtractor = new MfccExtractor(sr, 13, filterbankSize: 24);
var preEmphasis = new PreEmphasisFilter(0.95);
var mfccVectors = mfccExtractor.ParallelComputeFrom(preEmphasis.ApplyTo(signal));


var tdExtractor = new TimeDomainFeaturesExtractor(sr, "all", frameDuration, hopDuration);
var spectralExtractor = new SpectralFeaturesExtractor(sr, "centroid, flatness, c1+c2+c3", 0.032, 0.015);

var vectors = FeaturePostProcessing.Join(
				tdExtractor.ParallelComputeFrom(signal), 
				spectralExtractor.ParallelComputeFrom(signal));

// each vector will contain 1) all time-domain features (energy, rms, entropy, zcr)
//                          2) specified spectral features


var pnccExtractor = new PnccExtractor(sr, 13);
var pnccVectors = pnccExtractor.ComputeFrom(signal, /*from*/1000, /*to*/10000 /*sample*/);
FeaturePostProcessing.NormalizeMean(pnccVectors);


// serialization

using (var csvFile = new FileStream("mfccs.csv", FileMode.Create))
{
    var serializer = new CsvFeatureSerializer(mfccVectors);
    await serializer.SerializeAsync(csvFile);
}

IAudioPlayer player = new MciAudioPlayer();

// play entire file
await player.PlayAsync("temp.wav");

// play file from 16000th sample to 32000th sample
await player.PlayAsync("temp.wav", 16000, 32000);


// ...in some event handler
player.Pause();

// ...in some event handler
player.Resume();

// ...in some event handler
player.Stop();


// recording

IAudioRecorder recorder = new MciAudioRecorder();

// ...in some event handler
recorder.StartRecording(16000);

// ...in some event handler
recorder.StopRecording("temp.wav");