Fixed positioning of menu in Editor (it was too low)
updated versioning for 1.2.2
Fixed null ref when F is pressed and no part is selected
Fixed (the right way) the no offset tool for local/absolute offsets
Fixed issue where NoOffsetLimits was not working upon entry into editor
Added ability to disable Fine Adjust window
Added window showing angle snaps, clickin on button will set that value
Added code to toggle no offset limit to settings window
Fixed code for toggling the no offset Limit
Added automatic updating of AssemblyVersion, from the .version file, displayed in the Settings window
Removed extra set of configs for the Reflection offsets
Fixed bug with local offset vs absolute offset; Code was not using the local setting, was always using the absolute setting
Fixed menu Show Tweakables, for when Advanced tweakables is enabled, to show at the right height
Fixed resizing of menu
Added AnglesnapModIsToggle, if enabled, hitting the Mod-C (for Windows,ALT-C) will switch between 1 and the last setting
Added CycleSymmetryModeModIsToggle , if enabled, hitting the Mod-X (for Windows, ALT-X) will switch between 1 and the last setting
Reordered the settings windows, now all keystroke settings are on the Settings 2 window
Commented out old code blocks: SymmetryModeCycle & AngleSnapCycle, which were replaced by Boop's code in Update()
Updated for 1.2.1
Fixed menu height to adjust depending on whether mass tweakables is on or off - Menu
needs to be redisplayed by moving the mouse over the toolbar for height to be adjusted, only applies when Advanced
Tweakables is off
Changed "No Show Autostruts" to "Hide Autostruts" text on buttons
MasterSnap now can be turned off by clicking anywhere not on a part. Previously, had to click on another part
Added Autostrut and Rigidity buttons, thanks @Boop:
All Rigid
Disable Rigid
Toggle Rigid
No Autostruts
AS Grandparent
AS Heaviest
AS Root
Show Autostruts
Added No Offset Limit Toggle
Added ability to disable the SelectRoot functionality, so you can use the stock SelectRoot to change the root on a shadow assembly
Added Master Snap mode. This allows you to snap parts to any random part, not just the parent. This works for both horizontal and vertical snapping. The part selected as the master will be highlighted
Snapping is shown visually via a smooth movement of the part from the original location to the destination
Fixed bug with no offset limit preventing swap between local and absolute coordinates
Added ability to disable internal reroot, so that you can use the stock reroot to reroot shadow part assemblies
Boop's changes for more robust symmetry and angle snap cycling (thanks Boop and Fwiffo).
Updated values for KSP 1.1.3
center horizontally on z-axis with shift+H. (thanks OliverPA77)
Fixed Fine Adjustments window (inability to close it or change the values)
Now saves both angle snap value and whether it was on/off after exiting editor session
Fixed issue with fine adjust translation wouldn't work if snap was on
Fixed rotation gizmo to not angle snap when anglesnap is off
Replaced code which did FindObjectsOftype with GizmoEvents class for performance improvement
Updated FineAdjustments window to detect which gizmo is active
Added 1/4 second delay in hiding menu
Added UI scaling code to position of EEX menu
Fixed accidently disabling the ability to change the anglesnap on/off by clicking the sprite
Removed old code from the FineAdjust Update function which was causing an exception
Reduced height of popup menu
Fixed bug where clicking on the symmetry sprite (the one which changes the angle snap degrees) when the angle was zero
would not allow surface attachments to anything other than the +z axis:
"I can place the battery only on the +z axis of the structure. I cannot place it on -z, +x, -x"
Removed performance issue when Fine Adjustments window was shown
Reduced performance impact when fine adjustments are being done
Added code from Fwiffo to fix bug where changing the angle snap while in rotate mode would not affect the rotate gizmo
Added code from Fwiffo for Rapid Zoom
Note: Code from Fwiffo was modified to use the Reflection offsets rather than names to maintain compatibility with Linux & OSX
Fixed bug where going into the rotate gizmo the first time without changing the snap would have a rotation snap of 15 when it should have been zero
NEW FEATURE: Fine Adjust
Fine Adjust window added
New config window for fine adjust keys
When Fine Adjust window is open, keys will do fine adjustments depending on which gizmo is selected:
Default keys: arrow keys + rightShift & rightControl
Added code so that typing in text fields will be ignored by mod
Added compatility for 1.1.2
Added back 1.1.0 compatiblity
Added check for compatibility with specific KSP versions, currently 1.1.0 & 1.1.1
Fixed offsets to eliminate nullrefs
Updated for 1.1.1
Includes submods: Strip Symmetry No Offset Limits SelectRoot2Behaviour
- Allows custom levels of radial symmetry beyond the stock limitations.
- Horizontally and vertically center parts.
- Re-Align placed struts and fuel lines between parts
- Adds radial/angle snapping at 1°,5°,15°,22.5°,30°,45°,60°, and 90°. Angles are customizable.
- Toggle part clipping (From the cheat options)
- Toggle radial and node attachment of parts
- Reset hangar camera view
- Customize hotkeys
- CKAN & KSP-AVC versioning support
- Rapid zoom mode when using keys to zoom (when using stock zoom mode)
- Place the part, then once the part is placed, hover over the part with your mouse and press the Vertical or Horizontal snap hotkey.
- For vertical snap, part will center itself on the part lengthwise in the SPH
- Hold down "left control" and select the "master" part.
- Hover the cursor over the child part and press "v" for vertical snap or "h" for a horizontal snap. This will snap the child part to the master part's vertical or horizontal position.
- Click on an empty space to turn off Master Snap.
- This should prove to be very useful for VTOLs where you can't apply engines in symmetry.
- Place the strut, then hover over the base/start of the strut (the first end placed) with the mouse, and press the hotkey.
- Strut/FL start and end with be snapped to the closest of either the middle, quarter, or end of the part, aligned directly between the two parts.
- Mod/Alt-U will reposition the strut/FL directly between the parts, but only level out the strut from the start/parent part.
- Zoom in / out more rapidly by double-tapping the zoom in / out hotkey. i.e. If you just hold down the "zoom in" hotkey, it works like normal. But if you double-tap-hold, it zooms in at 5x the speed. Releasing the hotkey sets zoom back to normal
- V - Vertically center a part. Place the part, hover over it with the mouse, and press the hotkey.
- H - Horizontally center the part. Place the part, hover over it with the mouse, and press the hotkey.
- U - Place the strut, then hover over the base/start of the strut (the first end placed) with the mouse, and press the hotkey.
- Mod/Alt-U - Strut will be aligned level with its starting position
- X, Shift+X - Increase/Decrease symmetry level (Based on KSP's key map)
- Alt+X - Reset symmetry level (Based on KSP's key map)
- C, Shift+C - Increase/Decrease angle snap (Based on KSP's key map)
- Alt+C - Reset angle snap (Based on KSP's key map)
- T - Attachment mode: Toggle between surface and node attachment modes for all parts, and when a part is selected, will toggle surface attachment even when that part's config usually does not allow it.
- Alt+Z - Toggle part clipping (CAUTION: This is a cheat option)
- Space - When no part is selected, resets camera pitch and heading (straight ahead and level)
- Note in very rare circumstances the symmetry and angle snap keybindings might be lost. This would only occur if another mod triggers the game to save its settings while in the VAB/SPH, and the game subsequently crashes or is killed before exiting the building. If it happens, you can easily restore the keybindings (X and C by default) in the game's settings menu.
- R - Toggle symmetry mode from SPH to VAB style (mirror to radial).
- Alt + Shift + Left Click on the part and symmetry will be stripped from it ***On Linux, the keys are: Left-Alt Left-Shift Left-Click
- The offset tool now does not have any limits. Nothing needs to be done, this just works
- This simplifies the select root functionality. No need to click the same part multiple times.
- 4 - Activates the stock code, or click on the select-root icon Click on the part you want to be the new root. It will be made root AND will be selected, so you need to position the ship and click to drop it
In this version there is also a still-incomplete feature: A part-zoom/part camera orbit - the numpad . key will focus and orbit the camera around the part under the mouse. hitting numpad . again with no part under the mouse will reset the camera back to normal. Currently in the focus mode dragging parts gets skewed so it is only good for viewing the part from another perspective, and not editing or moving parts.
###Installation In your KSP GameData folder, delete any existing EditorExtensions folder. Download the zip file to your KSP GameData folder and unzip.
Released under MIT license. Source available at GitHub: https://github.com/MachXXV/EditorExtensions