| public FindMinSeparation ( int &indexA, int &indexB, float t ) : float | ||
| indexA | int | |
| indexB | int | |
| t | float | |
| Résultat | float | |
/// <summary>
/// Compute the upper bound on time before two shapes penetrate. Time is represented as
/// a fraction between [0,tMax]. This uses a swept separating axis and may miss some intermediate,
/// non-tunneling collision. If you change the time interval, you should call this function
/// again.
/// Note: use Distance() to compute the contact point and normal at the time of impact.
/// </summary>
/// <param name="output">The output.</param>
/// <param name="input">The input.</param>
public static void CalculateTimeOfImpact(out TOIOutput output, ref TOIInput input)
{
++TOICalls;
output = new TOIOutput();
output.State = TOIOutputState.Unknown;
output.T = input.TMax;
Sweep sweepA = input.SweepA;
Sweep sweepB = input.SweepB;
// Large rotations can make the root finder fail, so we normalize the
// sweep angles.
sweepA.Normalize();
sweepB.Normalize();
float tMax = input.TMax;
float totalRadius = input.ProxyA.Radius + input.ProxyB.Radius;
float target = Math.Max(Settings.LinearSlop, totalRadius - 3.0f * Settings.LinearSlop);
const float tolerance = 0.25f * Settings.LinearSlop;
Debug.Assert(target > tolerance);
float t1 = 0.0f;
const int k_maxIterations = 20;
int iter = 0;
// Prepare input for distance query.
SimplexCache cache;
DistanceInput distanceInput;
distanceInput.ProxyA = input.ProxyA;
distanceInput.ProxyB = input.ProxyB;
distanceInput.UseRadii = false;
// The outer loop progressively attempts to compute new separating axes.
// This loop terminates when an axis is repeated (no progress is made).
for (;;)
{
Transform xfA, xfB;
sweepA.GetTransform(out xfA, t1);
sweepB.GetTransform(out xfB, t1);
// Get the distance between shapes. We can also use the results
// to get a separating axis.
distanceInput.TransformA = xfA;
distanceInput.TransformB = xfB;
DistanceOutput distanceOutput;
Distance.ComputeDistance(out distanceOutput, out cache, ref distanceInput);
// If the shapes are overlapped, we give up on continuous collision.
if (distanceOutput.Distance <= 0.0f)
{
// Failure!
output.State = TOIOutputState.Overlapped;
output.T = 0.0f;
break;
}
if (distanceOutput.Distance < target + tolerance)
{
// Victory!
output.State = TOIOutputState.Touching;
output.T = t1;
break;
}
SeparationFunction fcn = new SeparationFunction(ref cache, ref input.ProxyA, ref sweepA,
ref input.ProxyB, ref sweepB, t1);
// Compute the TOI on the separating axis. We do this by successively
// resolving the deepest point. This loop is bounded by the number of vertices.
bool done = false;
float t2 = tMax;
int pushBackIter = 0;
for (;;)
{
// Find the deepest point at t2. Store the witness point indices.
int indexA, indexB;
float s2 = fcn.FindMinSeparation(out indexA, out indexB, t2);
// Is the final configuration separated?
if (s2 > target + tolerance)
{
// Victory!
output.State = TOIOutputState.Seperated;
output.T = tMax;
done = true;
break;
}
// Has the separation reached tolerance?
if (s2 > target - tolerance)
{
// Advance the sweeps
t1 = t2;
break;
}
// Compute the initial separation of the witness points.
float s1 = fcn.Evaluate(indexA, indexB, t1);
// Check for initial overlap. This might happen if the root finder
// runs out of iterations.
if (s1 < target - tolerance)
{
output.State = TOIOutputState.Failed;
output.T = t1;
done = true;
break;
}
// Check for touching
if (s1 <= target + tolerance)
{
// Victory! t1 should hold the TOI (could be 0.0).
output.State = TOIOutputState.Touching;
output.T = t1;
done = true;
break;
}
// Compute 1D root of: f(x) - target = 0
int rootIterCount = 0;
float a1 = t1, a2 = t2;
for (;;)
{
// Use a mix of the secant rule and bisection.
float t;
if ((rootIterCount & 1) != 0)
{
// Secant rule to improve convergence.
t = a1 + (target - s1) * (a2 - a1) / (s2 - s1);
}
else
{
// Bisection to guarantee progress.
t = 0.5f * (a1 + a2);
}
float s = fcn.Evaluate(indexA, indexB, t);
if (Math.Abs(s - target) < tolerance)
{
// t2 holds a tentative value for t1
t2 = t;
break;
}
// Ensure we continue to bracket the root.
if (s > target)
{
a1 = t;
s1 = s;
}
else
{
a2 = t;
s2 = s;
}
++rootIterCount;
++TOIRootIters;
if (rootIterCount == 50)
{
break;
}
}
TOIMaxRootIters = Math.Max(TOIMaxRootIters, rootIterCount);
++pushBackIter;
if (pushBackIter == Settings.MaxPolygonVertices)
{
break;
}
}
++iter;
++TOIIters;
if (done)
{
break;
}
if (iter == k_maxIterations)
{
// Root finder got stuck. Semi-victory.
output.State = TOIOutputState.Failed;
output.T = t1;
break;
}
}
TOIMaxIters = Math.Max(TOIMaxIters, iter);
}
/// <summary>
/// Compute the upper bound on time before two shapes penetrate. Time is represented as
/// a fraction between [0,tMax]. This uses a swept separating axis and may miss some intermediate,
/// non-tunneling collision. If you change the time interval, you should call this function
/// again.
/// Note: use Distance() to compute the contact point and normal at the time of impact.
/// </summary>
/// <param name="output">The output.</param>
/// <param name="input">The input.</param>
public static void CalculateTimeOfImpact(out TOIOutput output, ref TOIInput input)
{
++TOICalls;
output = new TOIOutput();
output.State = TOIOutputState.Unknown;
output.T = input.TMax;
Sweep sweepA = input.SweepA;
Sweep sweepB = input.SweepB;
// Large rotations can make the root finder fail, so we normalize the
// sweep angles.
sweepA.Normalize();
sweepB.Normalize();
float tMax = input.TMax;
float totalRadius = input.ProxyA.Radius + input.ProxyB.Radius;
float target = Math.Max(Settings.LinearSlop, totalRadius - 3.0f*Settings.LinearSlop);
const float tolerance = 0.25f*Settings.LinearSlop;
Debug.Assert(target > tolerance);
float t1 = 0.0f;
const int k_maxIterations = 20;
int iter = 0;
// Prepare input for distance query.
SimplexCache cache;
DistanceInput distanceInput;
distanceInput.ProxyA = input.ProxyA;
distanceInput.ProxyB = input.ProxyB;
distanceInput.UseRadii = false;
// The outer loop progressively attempts to compute new separating axes.
// This loop terminates when an axis is repeated (no progress is made).
for (;;)
{
Transform xfA, xfB;
sweepA.GetTransform(out xfA, t1);
sweepB.GetTransform(out xfB, t1);
// Get the distance between shapes. We can also use the results
// to get a separating axis.
distanceInput.TransformA = xfA;
distanceInput.TransformB = xfB;
DistanceOutput distanceOutput;
Distance.ComputeDistance(out distanceOutput, out cache, ref distanceInput);
// If the shapes are overlapped, we give up on continuous collision.
if (distanceOutput.Distance <= 0.0f)
{
// Failure!
output.State = TOIOutputState.Overlapped;
output.T = 0.0f;
break;
}
if (distanceOutput.Distance < target + tolerance)
{
// Victory!
output.State = TOIOutputState.Touching;
output.T = t1;
break;
}
SeparationFunction fcn = new SeparationFunction(ref cache, ref input.ProxyA, ref sweepA,
ref input.ProxyB, ref sweepB, t1);
// Compute the TOI on the separating axis. We do this by successively
// resolving the deepest point. This loop is bounded by the number of vertices.
bool done = false;
float t2 = tMax;
int pushBackIter = 0;
for (;;)
{
// Find the deepest point at t2. Store the witness point indices.
int indexA, indexB;
float s2 = fcn.FindMinSeparation(out indexA, out indexB, t2);
// Is the final configuration separated?
if (s2 > target + tolerance)
{
// Victory!
output.State = TOIOutputState.Seperated;
output.T = tMax;
done = true;
break;
}
// Has the separation reached tolerance?
if (s2 > target - tolerance)
{
// Advance the sweeps
t1 = t2;
break;
}
// Compute the initial separation of the witness points.
float s1 = fcn.Evaluate(indexA, indexB, t1);
// Check for initial overlap. This might happen if the root finder
// runs out of iterations.
if (s1 < target - tolerance)
{
output.State = TOIOutputState.Failed;
output.T = t1;
done = true;
break;
}
// Check for touching
if (s1 <= target + tolerance)
{
// Victory! t1 should hold the TOI (could be 0.0).
output.State = TOIOutputState.Touching;
output.T = t1;
done = true;
break;
}
// Compute 1D root of: f(x) - target = 0
int rootIterCount = 0;
float a1 = t1, a2 = t2;
for (;;)
{
// Use a mix of the secant rule and bisection.
float t;
if ((rootIterCount & 1) != 0)
{
// Secant rule to improve convergence.
t = a1 + (target - s1)*(a2 - a1)/(s2 - s1);
}
else
{
// Bisection to guarantee progress.
t = 0.5f*(a1 + a2);
}
float s = fcn.Evaluate(indexA, indexB, t);
if (Math.Abs(s - target) < tolerance)
{
// t2 holds a tentative value for t1
t2 = t;
break;
}
// Ensure we continue to bracket the root.
if (s > target)
{
a1 = t;
s1 = s;
}
else
{
a2 = t;
s2 = s;
}
++rootIterCount;
++TOIRootIters;
if (rootIterCount == 50)
{
break;
}
}
TOIMaxRootIters = Math.Max(TOIMaxRootIters, rootIterCount);
++pushBackIter;
if (pushBackIter == Settings.MaxPolygonVertices)
{
break;
}
}
++iter;
++TOIIters;
if (done)
{
break;
}
if (iter == k_maxIterations)
{
// Root finder got stuck. Semi-victory.
output.State = TOIOutputState.Failed;
output.T = t1;
break;
}
}
TOIMaxIters = Math.Max(TOIMaxIters, iter);
}