private void InitAudioStream()
{
// The number of buffers to queue into the source.
const int NUM_BUFFERS = 4;
// Generate the source.
IntPtr audioPtr = IntPtr.Zero;
do
{
audioPtr = TheoraPlay.THEORAPLAY_getAudio(Video.theoraDecoder);
} while (audioPtr == IntPtr.Zero);
TheoraPlay.THEORAPLAY_AudioPacket packet = TheoraPlay.getAudioPacket(audioPtr);
audioStream = new DynamicSoundEffectInstance(
packet.freq,
(AudioChannels)packet.channels
);
audioStream.BufferNeeded += OnBufferRequest;
UpdateVolume();
// Fill and queue the buffers.
for (int i = 0; i < NUM_BUFFERS; i += 1)
{
if (!StreamAudio())
{
break;
}
}
}
public void Dispose()
{
// Stop and unassign the decoder.
if (theoraDecoder != IntPtr.Zero)
{
TheoraPlay.THEORAPLAY_stopDecode(theoraDecoder);
theoraDecoder = IntPtr.Zero;
}
// Free and unassign the video stream.
if (videoStream != IntPtr.Zero)
{
TheoraPlay.THEORAPLAY_freeVideo(videoStream);
videoStream = IntPtr.Zero;
}
// Free and unassign the audio stream.
if (audioStream != IntPtr.Zero)
{
TheoraPlay.THEORAPLAY_freeAudio(audioStream);
audioStream = IntPtr.Zero;
}
IsDisposed = true;
}
public void Stop()
{
checkDisposed();
// Check the player state before attempting anything.
if (State == MediaState.Stopped)
{
return;
}
// Update the player state.
State = MediaState.Stopped;
// Wait for the player to end if it's still going.
System.Console.Write("Signaled Theora player to stop, waiting...");
timer.Stop();
timer.Reset();
if (audioStream != null)
{
audioStream.Stop();
audioStream.Dispose();
audioStream = null;
}
if (previousFrame != IntPtr.Zero)
{
TheoraPlay.THEORAPLAY_freeVideo(previousFrame);
}
Video.AttachedToPlayer = false;
Video.Dispose();
System.Console.WriteLine(" Done!");
}
public void Stop()
{
checkDisposed();
// Check the player state before attempting anything.
if (State == MediaState.Stopped)
{
return;
}
// Update the player state.
State = MediaState.Stopped;
// Wait for the player to end if it's still going.
if (!audioDecoderThread.IsAlive)
{
return;
}
Log.Editor.Write("Signaled Theora player to stop, waiting...");
timer.Stop();
timer.Reset();
audioDecoderThread.Join();
if (previousFrame != IntPtr.Zero)
{
TheoraPlay.THEORAPLAY_freeVideo(previousFrame);
}
Video.Dispose();
Log.Editor.Write("Theora player stopped!");
}
private void DecodeAudio()
{
const int bufferSize = 4096 * 2;
while (State != MediaState.Stopped && _theoraVideo != null)
{
var theoraDecoder = _theoraVideo.TheoraDecoder;
while (State != MediaState.Stopped && TheoraPlay.THEORAPLAY_availableAudio(theoraDecoder) == 0)
{
continue;
}
var data = new List <float>();
TheoraPlay.THEORAPLAY_AudioPacket currentAudio;
while (data.Count < bufferSize && TheoraPlay.THEORAPLAY_availableAudio(theoraDecoder) > 0)
{
var audioPtr = TheoraPlay.THEORAPLAY_getAudio(theoraDecoder);
currentAudio = TheoraPlay.getAudioPacket(audioPtr);
data.AddRange(TheoraPlay.getSamples(currentAudio.samples, currentAudio.frames * currentAudio.channels));
TheoraPlay.THEORAPLAY_freeAudio(audioPtr);
}
if (State == MediaState.Playing)
{
_fmodTheoraStream.Stream(data.ToArray());
}
}
}
public void InitializeVideo(string fileName)
{
// set finished to true before we start so that anyone polling on this flag afterwards won't get stuck in a loop in the case
// where initialization fails.
IsFinished = true;
// Initialize the decoder.
try
{
_theoraDecoder = TheoraPlay.THEORAPLAY_startDecodeFile(
fileName,
30, // Arbitrarily 1 seconds in a 30fps movie.
//#if !VIDEOPLAYER_OPENGL
// TheoraPlay.THEORAPLAY_VideoFormat.THEORAPLAY_VIDFMT_RGBA
//#else
TheoraPlay.THEORAPLAY_VideoFormat.THEORAPLAY_VIDFMT_IYUV
//#endif
);
var counter = 0;
// Wait until the decoder is ready.
while (TheoraPlay.THEORAPLAY_isInitialized(_theoraDecoder) == 0 && counter < 100)
{
Thread.Sleep(10);
counter++;
}
if (counter >= 100)
{
Log.Editor.WriteError("Could not initialize {0}. Operation timed out sorry", fileName);
return;
}
// Initialize the video stream pointer and get our first frame.
if (TheoraPlay.THEORAPLAY_hasVideoStream(_theoraDecoder) != 0)
{
while (_videoStream == IntPtr.Zero)
{
_videoStream = TheoraPlay.THEORAPLAY_getVideo(_theoraDecoder);
Thread.Sleep(10);
}
var frame = GetVideoFrame(_videoStream);
// We get the FramesPerSecond from the first frame.
FramesPerSecond = (float)frame.fps;
Width = (int)frame.width;
Height = (int)frame.height;
IsFinished = false;
}
_disposed = false;
}
catch (BadImageFormatException exception)
{
Log.Editor.WriteError("There was a problem initializing Theoraplay possibly running on x64, we only support x86 for the moment.{1} {0} {1} {2}", exception.Message, Environment.NewLine, exception.StackTrace);
}
catch (Exception exception)
{
Log.Editor.WriteError("There was a problem initializing video with Theoraplay. {1} {0} {1} {2}", exception.Message, Environment.NewLine, exception.StackTrace);
}
}
private bool StreamAudio(int buffer)
{
// The size of our abstracted buffer.
const int BUFFER_SIZE = 4096 * 2;
// Store our abstracted buffer into here.
List <float> data = new List <float>();
// Be sure we have an audio stream first!
if (Video.audioStream == IntPtr.Zero)
{
return(false); // NOPE
}
// Add to the buffer from the decoder until it's large enough.
while (data.Count < BUFFER_SIZE && State != MediaState.Stopped)
{
data.AddRange(
TheoraPlay.getSamples(
currentAudio.samples,
currentAudio.frames * currentAudio.channels
)
);
// We've copied the audio, so free this.
TheoraPlay.THEORAPLAY_freeAudio(Video.audioStream);
do
{
Video.audioStream = TheoraPlay.THEORAPLAY_getAudio(Video.theoraDecoder);
if (State == MediaState.Stopped)
{
// Screw it, just bail out ASAP.
return(false);
}
} while (Video.audioStream == IntPtr.Zero);
currentAudio = TheoraPlay.getAudioPacket(Video.audioStream);
if ((BUFFER_SIZE - data.Count) < 4096)
{
break;
}
}
// If we actually got data, buffer it into OpenAL.
if (data.Count > 0)
{
AL.BufferData(
buffer,
(currentAudio.channels == 2) ? ALFormat.StereoFloat32Ext : ALFormat.MonoFloat32Ext,
data.ToArray(),
data.Count * 2 * currentAudio.channels, // Dear OpenAL: WTF?! Love, flibit
currentAudio.freq
);
return(true);
}
return(false);
}
/// <summary>
/// This method is to override some default behaviour in TheoraPlay-CS that we don't want for Android. Probably a better solution
/// would be to update TheoraPlay-CS, but I'm not 100% sure what the change should be as it appears to vary by platform.
/// </summary>
/// <param name="videoStream"></param>
/// <returns></returns>
private static unsafe TheoraPlay.THEORAPLAY_VideoFrame GetVideoFrame(IntPtr videoStream)
{
#if __ANDROID__
var framePtr = (TheoraPlay.THEORAPLAY_VideoFrame *)videoStream;
return(*framePtr);
#else
return(TheoraPlay.getVideoFrame(videoStream));
#endif
}
internal void Initialize()
{
if (!IsDisposed)
{
Dispose(); // We need to start from the beginning, don't we? :P
}
// Initialize the decoder.
theoraDecoder = TheoraPlay.THEORAPLAY_startDecodeFile(
_fileName,
150, // Arbitrarily 5 seconds in a 30fps movie.
#if VIDEOPLAYER_OPENGL
TheoraPlay.THEORAPLAY_VideoFormat.THEORAPLAY_VIDFMT_IYUV
#else
// Use the TheoraPlay software converter.
TheoraPlay.THEORAPLAY_VideoFormat.THEORAPLAY_VIDFMT_RGBA
#endif
);
// Wait until the decoder is ready.
while (TheoraPlay.THEORAPLAY_isInitialized(theoraDecoder) == 0)
{
Thread.Sleep(10);
}
// Initialize the audio stream pointer and get our first packet.
if (TheoraPlay.THEORAPLAY_hasAudioStream(theoraDecoder) != 0)
{
while (audioStream == IntPtr.Zero)
{
audioStream = TheoraPlay.THEORAPLAY_getAudio(theoraDecoder);
Thread.Sleep(10);
}
}
// Initialize the video stream pointer and get our first frame.
if (TheoraPlay.THEORAPLAY_hasVideoStream(theoraDecoder) != 0)
{
while (videoStream == IntPtr.Zero)
{
videoStream = TheoraPlay.THEORAPLAY_getVideo(theoraDecoder);
Thread.Sleep(10);
}
TheoraPlay.THEORAPLAY_VideoFrame frame = TheoraPlay.getVideoFrame(videoStream);
// We get the FramesPerSecond from the first frame.
FramesPerSecond = (float)frame.fps;
Width = (int)frame.width;
Height = (int)frame.height;
}
IsDisposed = false;
}
private bool StreamAudio(int buffer)
{
// The size of our abstracted buffer.
const int BUFFER_SIZE = 4096 * 2;
// Store our abstracted buffer into here.
List <float> data = new List <float>();
// We'll store this here, so alBufferData can use it too.
TheoraPlay.THEORAPLAY_AudioPacket currentAudio;
currentAudio.channels = 0;
currentAudio.freq = 0;
// Add to the buffer from the decoder until it's large enough.
while (
State != MediaState.Stopped &&
TheoraPlay.THEORAPLAY_availableAudio(Video.TheoraDecoder) == 0
)
{
;
}
while (
data.Count < BUFFER_SIZE &&
State != MediaState.Stopped &&
TheoraPlay.THEORAPLAY_availableAudio(Video.TheoraDecoder) > 0
)
{
IntPtr audioPtr = TheoraPlay.THEORAPLAY_getAudio(Video.TheoraDecoder);
currentAudio = TheoraPlay.getAudioPacket(audioPtr);
data.AddRange(
TheoraPlay.getSamples(
currentAudio.samples,
currentAudio.frames * currentAudio.channels
)
);
TheoraPlay.THEORAPLAY_freeAudio(audioPtr);
}
// If we actually got data, buffer it into OpenAL.
if (data.Count > 0)
{
AL.BufferData(
buffer,
(currentAudio.channels == 2) ? ALFormat.StereoFloat32Ext : ALFormat.MonoFloat32Ext,
data.ToArray(),
data.Count * 2 * currentAudio.channels, // Dear OpenAL: WTF?! Love, flibit
currentAudio.freq
);
return(true);
}
return(false);
}
private bool StreamAudio()
{
// The size of our abstracted buffer.
const int BUFFER_SIZE = 4096 * 2;
// Store our abstracted buffer into here.
List <float> data = new List <float>();
// We'll store this here, so alBufferData can use it too.
TheoraPlay.THEORAPLAY_AudioPacket currentAudio;
// There might be an initial period of silence, so forcibly push through.
while (audioStream.State == SoundState.Stopped &&
TheoraPlay.THEORAPLAY_availableAudio(Video.theoraDecoder) == 0)
{
;
}
// Add to the buffer from the decoder until it's large enough.
while (data.Count < BUFFER_SIZE)
{
IntPtr audioPtr = TheoraPlay.THEORAPLAY_getAudio(Video.theoraDecoder);
if (audioPtr == IntPtr.Zero)
{
// FIXME: THEORAPLAY_availableAudio has rounding issues! -flibit
break;
}
currentAudio = TheoraPlay.getAudioPacket(audioPtr);
data.AddRange(
TheoraPlay.getSamples(
currentAudio.samples,
currentAudio.frames * currentAudio.channels
)
);
TheoraPlay.THEORAPLAY_freeAudio(audioPtr);
}
// If we actually got data, queue it!
if (data.Count > 0)
{
audioStream.SubmitFloatBufferEXT(data.ToArray());
}
else if (TheoraPlay.THEORAPLAY_isDecoding(Video.theoraDecoder) == 0)
{
// Okay, we ran out. No need for this!
audioStream.BufferNeeded -= OnBufferRequest;
return(false);
}
return(true);
}
private void InitializeTheoraStream()
{
// Start the video if it hasn't been yet.
if (Video.IsDisposed)
{
Video.Initialize();
}
// Grab the first bit of audio. We're trying to start the decoding ASAP.
if (TheoraPlay.THEORAPLAY_hasAudioStream(Video.theoraDecoder) != 0)
{
// Generate the source.
IntPtr audioPtr = IntPtr.Zero;
do
{
// The decoder miiight not be ready yet.
audioPtr = TheoraPlay.THEORAPLAY_getAudio(Video.theoraDecoder);
} while (audioPtr == IntPtr.Zero);
TheoraPlay.THEORAPLAY_AudioPacket packet = TheoraPlay.getAudioPacket(audioPtr);
audioStream = new DynamicSoundEffectInstance(
packet.freq,
(AudioChannels)packet.channels
);
audioStream.BufferNeeded += OnBufferRequest;
UpdateVolume();
// Fill and queue the buffers.
for (int i = 0; i < 4; i += 1)
{
if (!StreamAudio())
{
break;
}
}
}
// Grab the first bit of video.
if (TheoraPlay.THEORAPLAY_hasVideoStream(Video.theoraDecoder) != 0)
{
currentVideo = TheoraPlay.getVideoFrame(Video.videoStream);
previousFrame = Video.videoStream;
do
{
// The decoder miiight not be ready yet.
Video.videoStream = TheoraPlay.THEORAPLAY_getVideo(Video.theoraDecoder);
} while (Video.videoStream == IntPtr.Zero);
nextVideo = TheoraPlay.getVideoFrame(Video.videoStream);
}
}
private bool StreamAudio()
{
// The size of our abstracted buffer.
const int BUFFER_SIZE = 4096 * 2;
// Store our abstracted buffer into here.
List <float> data = new List <float>();
// We'll store this here, so alBufferData can use it too.
TheoraPlay.THEORAPLAY_AudioPacket currentAudio;
currentAudio.channels = 0;
currentAudio.freq = 0;
// There might be an initial period of silence, so forcibly push through.
while (audioStream.State == SoundState.Stopped &&
TheoraPlay.THEORAPLAY_availableAudio(Video.theoraDecoder) == 0)
{
;
}
// Add to the buffer from the decoder until it's large enough.
while (data.Count < BUFFER_SIZE &&
TheoraPlay.THEORAPLAY_availableAudio(Video.theoraDecoder) > 0)
{
IntPtr audioPtr = TheoraPlay.THEORAPLAY_getAudio(Video.theoraDecoder);
currentAudio = TheoraPlay.getAudioPacket(audioPtr);
data.AddRange(
TheoraPlay.getSamples(
currentAudio.samples,
currentAudio.frames * currentAudio.channels
)
);
TheoraPlay.THEORAPLAY_freeAudio(audioPtr);
}
// If we actually got data, buffer it into OpenAL.
if (data.Count > 0)
{
audioStream.SubmitFloatBuffer(
data.ToArray(),
currentAudio.channels,
currentAudio.freq
);
return(true);
}
return(false);
}
public void UpdateVideo(float elapsedFrameTime)
{
while (_currentVideo.playms <= elapsedFrameTime && TheoraPlay.THEORAPLAY_availableVideo(_theoraDecoder) != 0)
{
_currentVideo = _nextVideo;
var nextFrame = TheoraPlay.THEORAPLAY_getVideo(_theoraDecoder);
if (nextFrame != IntPtr.Zero)
{
TheoraPlay.THEORAPLAY_freeVideo(_previousFrame);
_previousFrame = _videoStream;
_videoStream = nextFrame;
_nextVideo = GetVideoFrame(_videoStream);
}
}
IsFinished = TheoraPlay.THEORAPLAY_isDecoding(_theoraDecoder) == 0;
}
internal void Initialize()
{
if (!IsDisposed)
{
Dispose(); // We need to start from the beginning, don't we? :P
}
// Initialize the decoder.
theoraDecoder = TheoraPlay.THEORAPLAY_startDecodeFile(
fileName,
150, // Max frames to buffer. Arbitrarily set 5 seconds, assuming 30fps.
TheoraPlay.THEORAPLAY_VideoFormat.THEORAPLAY_VIDFMT_IYUV
);
// Wait until the decoder is ready.
while (TheoraPlay.THEORAPLAY_isInitialized(theoraDecoder) == 0)
{
Thread.Sleep(10);
}
// Initialize the video stream pointer and get our first frame.
if (TheoraPlay.THEORAPLAY_hasVideoStream(theoraDecoder) != 0)
{
while (videoStream == IntPtr.Zero)
{
videoStream = TheoraPlay.THEORAPLAY_getVideo(theoraDecoder);
Thread.Sleep(10);
}
TheoraPlay.THEORAPLAY_VideoFrame frame = TheoraPlay.getVideoFrame(videoStream);
// We get the FramesPerSecond from the first frame.
FramesPerSecond = (float)frame.fps;
Width = (int)frame.width;
Height = (int)frame.height;
}
IsDisposed = false;
}
public void Terminate()
{
// Stop and unassign the decoder.
if (_theoraDecoder != IntPtr.Zero)
{
TheoraPlay.THEORAPLAY_stopDecode(_theoraDecoder);
_theoraDecoder = IntPtr.Zero;
}
// Free and unassign the video stream.
if (_videoStream != IntPtr.Zero)
{
TheoraPlay.THEORAPLAY_freeVideo(_videoStream);
_videoStream = IntPtr.Zero;
}
_currentVideo = new TheoraPlay.THEORAPLAY_VideoFrame();
_nextVideo = new TheoraPlay.THEORAPLAY_VideoFrame();
TheoraPlay.THEORAPLAY_freeVideo(_previousFrame);
_previousFrame = IntPtr.Zero;
_videoStream = IntPtr.Zero;
_disposed = true;
}
internal void Dispose()
{
if (AttachedToPlayer)
{
return; // NOPE. VideoPlayer will do the honors.
}
// Stop and unassign the decoder.
if (theoraDecoder != IntPtr.Zero)
{
TheoraPlay.THEORAPLAY_stopDecode(theoraDecoder);
theoraDecoder = IntPtr.Zero;
}
// Free and unassign the video stream.
if (videoStream != IntPtr.Zero)
{
TheoraPlay.THEORAPLAY_freeVideo(videoStream);
videoStream = IntPtr.Zero;
}
IsDisposed = true;
}
private void DecodeAudio()
{
const int bufferSize = 4096 * 2;
while (State != MediaState.Stopped && _theoraVideo != null)
{
var theoraDecoder = _theoraVideo.TheoraDecoder;
while (State != MediaState.Stopped && TheoraPlay.THEORAPLAY_availableAudio(theoraDecoder) == 0)
{
// don't use all of the cpu while waiting for data
Thread.Sleep(1);
// if the game object has somehow been disposed with the state being set to stopped, then the thread will never
// exit, so check for that explicitly here
if (GameObj != null && GameObj.Disposed)
{
return;
}
}
var data = new List <float>();
TheoraPlay.THEORAPLAY_AudioPacket currentAudio;
while (data.Count < bufferSize && TheoraPlay.THEORAPLAY_availableAudio(theoraDecoder) > 0)
{
var audioPtr = TheoraPlay.THEORAPLAY_getAudio(theoraDecoder);
currentAudio = TheoraPlay.getAudioPacket(audioPtr);
data.AddRange(TheoraPlay.getSamples(currentAudio.samples, currentAudio.frames * currentAudio.channels));
TheoraPlay.THEORAPLAY_freeAudio(audioPtr);
}
if (State == MediaState.Playing)
{
_fmodTheoraStream.Stream(data.ToArray());
}
}
}
public void Play(Video video)
{
checkDisposed();
// We need to assign this regardless of what happens next.
Video = video;
video.AttachedToPlayer = true;
// FIXME: This is a part of the Duration hack!
Video.Duration = TimeSpan.MaxValue;
// Check the player state before attempting anything.
if (State != MediaState.Stopped)
{
return;
}
// Update the player state now, for the thread we're about to make.
State = MediaState.Playing;
// Start the video if it hasn't been yet.
if (Video.IsDisposed)
{
video.Initialize();
}
// Grab the first bit of audio. We're trying to start the decoding ASAP.
if (TheoraPlay.THEORAPLAY_hasAudioStream(Video.theoraDecoder) != 0)
{
InitAudioStream();
}
// Grab the first bit of video, set up the texture.
if (TheoraPlay.THEORAPLAY_hasVideoStream(Video.theoraDecoder) != 0)
{
currentVideo = TheoraPlay.getVideoFrame(Video.videoStream);
previousFrame = Video.videoStream;
do
{
// The decoder miiight not be ready yet.
Video.videoStream = TheoraPlay.THEORAPLAY_getVideo(Video.theoraDecoder);
} while (Video.videoStream == IntPtr.Zero);
nextVideo = TheoraPlay.getVideoFrame(Video.videoStream);
// The VideoPlayer will use the GraphicsDevice that is set now.
if (currentDevice != Video.GraphicsDevice)
{
GL_dispose();
currentDevice = Video.GraphicsDevice;
GL_initialize();
}
RenderTargetBinding overlap = videoTexture[0];
videoTexture[0] = new RenderTargetBinding(
new RenderTarget2D(
currentDevice,
(int)currentVideo.width,
(int)currentVideo.height,
false,
SurfaceFormat.Color,
DepthFormat.None,
0,
RenderTargetUsage.PreserveContents
)
);
if (overlap.RenderTarget != null)
{
overlap.RenderTarget.Dispose();
}
GL_setupTextures(
(int)currentVideo.width,
(int)currentVideo.height
);
}
// Initialize the thread!
FNAPlatform.Log("Starting Theora player...");
timer.Start();
if (audioStream != null)
{
audioStream.Play();
}
FNAPlatform.Log("Started!");
}
public Texture2D GetTexture()
{
checkDisposed();
// Be sure we can even get something from TheoraPlay...
if (State == MediaState.Stopped ||
Video.theoraDecoder == IntPtr.Zero ||
previousFrame == IntPtr.Zero ||
Video.videoStream == IntPtr.Zero ||
TheoraPlay.THEORAPLAY_isInitialized(Video.theoraDecoder) == 0)
{
return(videoTexture); // Screw it, give them the old one.
}
// Assign this locally, or else the thread will ruin your face.
frameLocked = true;
#if VIDEOPLAYER_OPENGL
// Set up an environment to muck about in.
GL_pushState();
// Bind our shader program.
GL.UseProgram(shaderProgram);
// Set uniform values.
GL.Uniform1(
GL.GetUniformLocation(shaderProgram, "samp0"),
0
);
GL.Uniform1(
GL.GetUniformLocation(shaderProgram, "samp1"),
1
);
GL.Uniform1(
GL.GetUniformLocation(shaderProgram, "samp2"),
2
);
// Set up the vertex pointers/arrays.
GL.VertexAttribPointer(
0,
2,
VertexAttribPointerType.Float,
false,
2 * sizeof(float),
vert_pos
);
GL.VertexAttribPointer(
1,
2,
VertexAttribPointerType.Float,
false,
2 * sizeof(float),
vert_tex
);
GL.EnableVertexAttribArray(0);
GL.EnableVertexAttribArray(1);
// Bind our target framebuffer.
GL.BindFramebuffer(FramebufferTarget.Framebuffer, rgbaFramebuffer);
// Prepare YUV GL textures with our current frame data
GL.ActiveTexture(TextureUnit.Texture0);
GL.BindTexture(TextureTarget.Texture2D, yuvTextures[0]);
GL.TexSubImage2D(
TextureTarget.Texture2D,
0,
0,
0,
(int)currentVideo.width,
(int)currentVideo.height,
PixelFormat.Luminance,
PixelType.UnsignedByte,
currentVideo.pixels
);
GL.ActiveTexture(TextureUnit.Texture1);
GL.BindTexture(TextureTarget.Texture2D, yuvTextures[1]);
GL.TexSubImage2D(
TextureTarget.Texture2D,
0,
0,
0,
(int)currentVideo.width / 2,
(int)currentVideo.height / 2,
PixelFormat.Luminance,
PixelType.UnsignedByte,
new IntPtr(
currentVideo.pixels.ToInt64() +
(currentVideo.width * currentVideo.height)
)
);
GL.ActiveTexture(TextureUnit.Texture2);
GL.BindTexture(TextureTarget.Texture2D, yuvTextures[2]);
GL.TexSubImage2D(
TextureTarget.Texture2D,
0,
0,
0,
(int)currentVideo.width / 2,
(int)currentVideo.height / 2,
PixelFormat.Luminance,
PixelType.UnsignedByte,
new IntPtr(
currentVideo.pixels.ToInt64() +
(currentVideo.width * currentVideo.height) +
(currentVideo.width / 2 * currentVideo.height / 2)
)
);
// Flip the viewport, because loldirectx
GL.Viewport(
0,
0,
(int)currentVideo.width,
(int)currentVideo.height
);
// Draw the YUV textures to the framebuffer with our shader.
GL.DrawArrays(BeginMode.TriangleStrip, 0, 4);
// Clean up after ourselves.
GL_popState();
#else
// Just copy it to an array, since it's RGBA anyway.
try
{
byte[] theoraPixels = TheoraPlay.getPixels(
currentVideo.pixels,
(int)currentVideo.width * (int)currentVideo.height * 4
);
// TexImage2D.
videoTexture.SetData <byte>(theoraPixels);
}
catch (Exception e)
{
System.Console.WriteLine(
"WARNING: THEORA FRAME COPY FAILED: " +
e.Message
);
frameLocked = false;
return(videoTexture); // Hope this still has something in it...
}
#endif
// Release the lock on the frame, we're done.
frameLocked = false;
return(videoTexture);
}
public void Play(OgvComponent video)
{
checkDisposed();
// We need to assign this regardless of what happens next.
Video = video;
// FIXME: This is a part of the Duration hack!
Video.Duration = TimeSpan.MaxValue;
// Check the player state before attempting anything.
if (State != MediaState.Stopped)
{
return;
}
// In rare cases, the thread might still be going. Wait until it's done.
if (audioDecoderThread != null && audioDecoderThread.IsAlive)
{
Stop();
}
// Create new Thread instances in case we use this player multiple times.
audioDecoderThread = new Thread(new ThreadStart(this.DecodeAudio));
// Update the player state now, for the thread we're about to make.
State = MediaState.Playing;
// Start the video if it hasn't been yet.
if (Video.IsDisposed)
{
video.Initialize();
}
// Grab the first bit of audio. We're trying to start the decoding ASAP.
if (TheoraPlay.THEORAPLAY_hasAudioStream(Video.TheoraDecoder) != 0)
{
audioDecoderThread.Start();
}
else
{
audioStarted = true; // Welp.
}
// Grab the first bit of video, set up the texture.
if (TheoraPlay.THEORAPLAY_hasVideoStream(Video.TheoraDecoder) != 0)
{
currentVideo = TheoraPlay.getVideoFrame(Video.VideoStream);
previousFrame = Video.VideoStream;
do
{
// The decoder miiight not be ready yet.
Video.VideoStream = TheoraPlay.THEORAPLAY_getVideo(Video.TheoraDecoder);
} while (Video.VideoStream == IntPtr.Zero);
nextVideo = TheoraPlay.getVideoFrame(Video.VideoStream);
Texture overlap = videoTexture;
videoTexture = new Texture(
// Game.Instance.GraphicsDevice,
// (int)currentVideo.width,
// (int)currentVideo.height,
// false,
// SurfaceFormat.Color
);
overlap.Dispose();
#if VIDEOPLAYER_OPENGL
GL_setupTargets(
(int)currentVideo.width,
(int)currentVideo.height
);
#endif
}
// Initialize the thread!
Log.Editor.Write("Starting Theora player...");
while (!audioStarted)
{
;
}
timer.Start();
if (audioSourceIndex != -1)
{
AL.SourcePlay(audioSourceIndex);
}
Log.Editor.Write(" Done starting Theora player!");
}
public Texture GetTexture()
{
checkDisposed();
// Be sure we can even get something from TheoraPlay...
if (State == MediaState.Stopped ||
Video.TheoraDecoder == IntPtr.Zero ||
TheoraPlay.THEORAPLAY_isInitialized(Video.TheoraDecoder) == 0 ||
TheoraPlay.THEORAPLAY_hasVideoStream(Video.TheoraDecoder) == 0)
{
return(videoTexture); // Screw it, give them the old one.
}
// Get the latest video frames.
bool missedFrame = false;
while (nextVideo.playms <= timer.ElapsedMilliseconds && !missedFrame)
{
currentVideo = nextVideo;
IntPtr nextFrame = TheoraPlay.THEORAPLAY_getVideo(Video.TheoraDecoder);
if (nextFrame != IntPtr.Zero)
{
TheoraPlay.THEORAPLAY_freeVideo(previousFrame);
previousFrame = Video.VideoStream;
Video.VideoStream = nextFrame;
nextVideo = TheoraPlay.getVideoFrame(Video.VideoStream);
missedFrame = false;
}
else
{
// Don't mind me, just ignoring that complete failure above!
missedFrame = true;
}
if (TheoraPlay.THEORAPLAY_isDecoding(Video.TheoraDecoder) == 0)
{
// FIXME: This is part of the Duration hack!
Video.Duration = new TimeSpan(0, 0, 0, 0, (int)currentVideo.playms);
// Stop and reset the timer. If we're looping, the loop will start it again.
timer.Stop();
timer.Reset();
// If looping, go back to the start. Otherwise, we'll be exiting.
if (IsLooped && State == MediaState.Playing)
{
// Wait for the audio thread to end.
State = MediaState.Stopped;
if (audioDecoderThread.ThreadState != System.Threading.ThreadState.Unstarted && audioDecoderThread.IsAlive == true)
{
audioDecoderThread.Join();
}
// Now we pretend we're playing again.
State = MediaState.Playing;
// Free everything and start over.
TheoraPlay.THEORAPLAY_freeVideo(previousFrame);
previousFrame = IntPtr.Zero;
Video.Dispose();
Video.Initialize();
// Grab the initial audio again.
if (TheoraPlay.THEORAPLAY_hasAudioStream(Video.TheoraDecoder) != 0)
{
audioDecoderThread = new Thread(new ThreadStart(DecodeAudio));
audioDecoderThread.Start();
}
else
{
audioStarted = true; // Welp.
}
// Grab the initial video again.
if (TheoraPlay.THEORAPLAY_hasVideoStream(Video.TheoraDecoder) != 0)
{
currentVideo = TheoraPlay.getVideoFrame(Video.VideoStream);
previousFrame = Video.VideoStream;
do
{
// The decoder miiight not be ready yet.
Video.VideoStream = TheoraPlay.THEORAPLAY_getVideo(Video.TheoraDecoder);
} while (Video.VideoStream == IntPtr.Zero);
nextVideo = TheoraPlay.getVideoFrame(Video.VideoStream);
}
// FIXME: Maybe use an actual thread synchronization technique.
while (!audioStarted)
{
;
}
// Start! Again!
timer.Start();
if (audioSourceIndex != -1)
{
AL.SourcePlay(audioSourceIndex);
}
}
else
{
// Stop everything, clean up. We out.
State = MediaState.Stopped;
if (audioDecoderThread.ThreadState != System.Threading.ThreadState.Unstarted && audioDecoderThread.IsAlive == true)
{
audioDecoderThread.Join();
}
TheoraPlay.THEORAPLAY_freeVideo(previousFrame);
Video.Dispose();
// We're done, so give them the last frame.
return(videoTexture);
}
}
}
#if VIDEOPLAYER_OPENGL
// Set up an environment to muck about in.
GL_pushState();
// Bind our shader program.
GL.UseProgram(shaderProgram);
// Set uniform values.
GL.Uniform1(
GL.GetUniformLocation(shaderProgram, "samp0"),
0
);
GL.Uniform1(
GL.GetUniformLocation(shaderProgram, "samp1"),
1
);
GL.Uniform1(
GL.GetUniformLocation(shaderProgram, "samp2"),
2
);
// Set up the vertex pointers/arrays.
GL.VertexAttribPointer(
0,
2,
VertexAttribPointerType.Float,
false,
2 * sizeof(float),
vert_pos
);
GL.VertexAttribPointer(
1,
2,
VertexAttribPointerType.Float,
false,
2 * sizeof(float),
vert_tex
);
GL.EnableVertexAttribArray(0);
GL.EnableVertexAttribArray(1);
// Bind our target framebuffer.
GL.BindFramebuffer(FramebufferTarget.Framebuffer, rgbaFramebuffer);
// Prepare YUV GL textures with our current frame data
GL.ActiveTexture(TextureUnit.Texture0);
GL.BindTexture(TextureTarget.Texture2D, yuvTextures[0]);
GL.TexSubImage2D(
TextureTarget.Texture2D,
0,
0,
0,
(int)currentVideo.width,
(int)currentVideo.height,
PixelFormat.Luminance,
PixelType.UnsignedByte,
currentVideo.pixels
);
GL.ActiveTexture(TextureUnit.Texture1);
GL.BindTexture(TextureTarget.Texture2D, yuvTextures[1]);
GL.TexSubImage2D(
TextureTarget.Texture2D,
0,
0,
0,
(int)currentVideo.width / 2,
(int)currentVideo.height / 2,
PixelFormat.Luminance,
PixelType.UnsignedByte,
new IntPtr(
currentVideo.pixels.ToInt64() +
(currentVideo.width * currentVideo.height)
)
);
GL.ActiveTexture(TextureUnit.Texture2);
GL.BindTexture(TextureTarget.Texture2D, yuvTextures[2]);
GL.TexSubImage2D(
TextureTarget.Texture2D,
0,
0,
0,
(int)currentVideo.width / 2,
(int)currentVideo.height / 2,
PixelFormat.Luminance,
PixelType.UnsignedByte,
new IntPtr(
currentVideo.pixels.ToInt64() +
(currentVideo.width * currentVideo.height) +
(currentVideo.width / 2 * currentVideo.height / 2)
)
);
// Flip the viewport, because loldirectx
GL.Viewport(
0,
0,
(int)currentVideo.width,
(int)currentVideo.height
);
// Draw the YUV textures to the framebuffer with our shader.
GL.DrawArrays(BeginMode.TriangleStrip, 0, 4);
// Clean up after ourselves.
GL_popState();
#else
// Just copy it to an array, since it's RGBA anyway.
try
{
byte[] theoraPixels = TheoraPlay.getPixels(
currentVideo.pixels,
(int)currentVideo.width * (int)currentVideo.height * 4
);
// TexImage2D.
videoTexture.SetData <byte>(theoraPixels);
}
catch (Exception e)
{
System.Console.WriteLine(
"WARNING: THEORA FRAME COPY FAILED: " +
e.Message
);
frameLocked = false;
return(videoTexture); // Hope this still has something in it...
}
#endif
return(videoTexture);
}
private void RunVideo()
{
// FIXME: Maybe use an actual thread synchronization technique.
while (!audioStarted && State != MediaState.Stopped)
{
;
}
while (State != MediaState.Stopped)
{
// Someone needs to look at their memory management...
if (Game.Instance == null)
{
System.Console.WriteLine("Game exited before video player! Halting...");
State = MediaState.Stopped;
}
// Sleep when paused, update the video state when playing.
if (State == MediaState.Paused)
{
// Pause the OpenAL source.
if (AL.GetSourceState(audioSourceIndex) == ALSourceState.Playing)
{
AL.SourcePause(audioSourceIndex);
}
// Stop the timer in here so we know when we really stopped.
if (timer.IsRunning)
{
timer.Stop();
}
// Arbitrarily 1 frame in a 30fps movie.
Thread.Sleep(33);
}
else
{
// Start the timer, whether we're starting or unpausing.
if (!timer.IsRunning)
{
timer.Start();
}
// If we're getting here, we should be playing the audio...
if (TheoraPlay.THEORAPLAY_hasAudioStream(Video.theoraDecoder) != 0)
{
if (AL.GetSourceState(audioSourceIndex) != ALSourceState.Playing)
{
AL.SourcePlay(audioSourceIndex);
}
}
// Get the next video from from the decoder, if a stream exists.
if (TheoraPlay.THEORAPLAY_hasVideoStream(Video.theoraDecoder) != 0)
{
// Only step when it's time to do so.
if (nextVideo.playms <= timer.ElapsedMilliseconds)
{
// Wait until GetTexture() is done.
// FIXME: Maybe use an actual thread synchronization technique.
while (frameLocked)
{
;
}
// Assign the new currentVideo, free the old one.
currentVideo = nextVideo;
// Get the next frame ready, free the old one.
IntPtr oldestFrame = previousFrame;
previousFrame = Video.videoStream;
Video.videoStream = TheoraPlay.THEORAPLAY_getVideo(Video.theoraDecoder);
if (Video.videoStream != IntPtr.Zero)
{
// Assign next frame, if it exists.
nextVideo = TheoraPlay.getVideoFrame(Video.videoStream);
// Then free the _really_ old frame.
TheoraPlay.THEORAPLAY_freeVideo(oldestFrame);
}
}
}
// If we're done decoding, we hit the end.
if (TheoraPlay.THEORAPLAY_isDecoding(Video.theoraDecoder) == 0)
{
// FIXME: This is a part of the Duration hack!
Video.Duration = new TimeSpan(0, 0, 0, 0, (int)currentVideo.playms);
// Stop and reset the timer.
// If we're looping, the loop will start it again.
timer.Stop();
timer.Reset();
// If looping, go back to the start. Otherwise, we'll be exiting.
if (IsLooped && State == MediaState.Playing)
{
// Wait for the audio thread to end.
State = MediaState.Stopped;
audioDecoderThread.Join();
// Now we pretend we're playing again.
State = MediaState.Playing;
// Free everything and start over.
TheoraPlay.THEORAPLAY_freeVideo(previousFrame);
previousFrame = IntPtr.Zero;
Video.Dispose();
Video.Initialize();
// Grab the initial audio again.
if (TheoraPlay.THEORAPLAY_hasAudioStream(Video.theoraDecoder) != 0)
{
currentAudio = TheoraPlay.getAudioPacket(Video.audioStream);
audioDecoderThread = new Thread(new ThreadStart(DecodeAudio));
audioDecoderThread.Start();
}
else
{
audioStarted = true; // Welp.
}
// Grab the initial video again.
if (TheoraPlay.THEORAPLAY_hasVideoStream(Video.theoraDecoder) != 0)
{
currentVideo = TheoraPlay.getVideoFrame(Video.videoStream);
previousFrame = Video.videoStream;
do
{
// The decoder miiight not be ready yet.
Video.videoStream = TheoraPlay.THEORAPLAY_getVideo(Video.theoraDecoder);
} while (Video.videoStream == IntPtr.Zero);
nextVideo = TheoraPlay.getVideoFrame(Video.videoStream);
}
// FIXME: Maybe use an actual thread synchronization technique.
while (!audioStarted && State != MediaState.Stopped)
{
;
}
}
else
{
State = MediaState.Stopped;
}
}
}
}
// Reset the video timer.
timer.Stop();
timer.Reset();
// Stop the decoding, we don't need it anymore.
audioDecoderThread.Join();
// We're desperately trying to keep this until the very end.
TheoraPlay.THEORAPLAY_freeVideo(previousFrame);
// We're not playing any video anymore.
Video.Dispose();
}
public void Play(Video video)
{
checkDisposed();
// We need to assign this regardless of what happens next.
Video = video;
video.AttachedToPlayer = true;
// FIXME: This is a part of the Duration hack!
Video.Duration = TimeSpan.MaxValue;
// Check the player state before attempting anything.
if (State != MediaState.Stopped)
{
return;
}
// Update the player state now, for the thread we're about to make.
State = MediaState.Playing;
// Start the video if it hasn't been yet.
if (Video.IsDisposed)
{
video.Initialize();
}
// Grab the first bit of audio. We're trying to start the decoding ASAP.
if (TheoraPlay.THEORAPLAY_hasAudioStream(Video.theoraDecoder) != 0)
{
InitAudioStream();
}
// Grab the first bit of video, set up the texture.
if (TheoraPlay.THEORAPLAY_hasVideoStream(Video.theoraDecoder) != 0)
{
currentVideo = TheoraPlay.getVideoFrame(Video.videoStream);
previousFrame = Video.videoStream;
do
{
// The decoder miiight not be ready yet.
Video.videoStream = TheoraPlay.THEORAPLAY_getVideo(Video.theoraDecoder);
} while (Video.videoStream == IntPtr.Zero);
nextVideo = TheoraPlay.getVideoFrame(Video.videoStream);
Texture2D overlap = videoTexture;
videoTexture = new Texture2D(
currentDevice,
(int)currentVideo.width,
(int)currentVideo.height,
false,
SurfaceFormat.Color
);
overlap.Dispose();
#if VIDEOPLAYER_OPENGL
GL_setupTargets(
(int)currentVideo.width,
(int)currentVideo.height
);
#endif
}
// Initialize the thread!
System.Console.Write("Starting Theora player...");
timer.Start();
if (audioStream != null)
{
audioStream.Play();
}
System.Console.WriteLine(" Done!");
}
public Texture2D GetTexture()
{
checkDisposed();
// Be sure we can even get something from TheoraPlay...
if (State == MediaState.Stopped ||
Video.theoraDecoder == IntPtr.Zero ||
TheoraPlay.THEORAPLAY_isInitialized(Video.theoraDecoder) == 0 ||
TheoraPlay.THEORAPLAY_hasVideoStream(Video.theoraDecoder) == 0)
{
return(videoTexture); // Screw it, give them the old one.
}
// Get the latest video frames.
bool missedFrame = false;
while (nextVideo.playms <= timer.ElapsedMilliseconds && !missedFrame)
{
currentVideo = nextVideo;
IntPtr nextFrame = TheoraPlay.THEORAPLAY_getVideo(Video.theoraDecoder);
if (nextFrame != IntPtr.Zero)
{
TheoraPlay.THEORAPLAY_freeVideo(previousFrame);
previousFrame = Video.videoStream;
Video.videoStream = nextFrame;
nextVideo = TheoraPlay.getVideoFrame(Video.videoStream);
missedFrame = false;
}
else
{
// Don't mind me, just ignoring that complete failure above!
missedFrame = true;
}
if (TheoraPlay.THEORAPLAY_isDecoding(Video.theoraDecoder) == 0)
{
// FIXME: This is part of the Duration hack!
Video.Duration = new TimeSpan(0, 0, 0, 0, (int)currentVideo.playms);
// Stop and reset the timer. If we're looping, the loop will start it again.
timer.Stop();
timer.Reset();
// If looping, go back to the start. Otherwise, we'll be exiting.
if (IsLooped && State == MediaState.Playing)
{
// Kill the audio, no matter what.
if (audioStream != null)
{
audioStream.Stop();
audioStream.Dispose();
audioStream = null;
}
// Free everything and start over.
TheoraPlay.THEORAPLAY_freeVideo(previousFrame);
previousFrame = IntPtr.Zero;
Video.AttachedToPlayer = false;
Video.Dispose();
Video.AttachedToPlayer = true;
Video.Initialize();
// Grab the initial audio again.
if (TheoraPlay.THEORAPLAY_hasAudioStream(Video.theoraDecoder) != 0)
{
InitAudioStream();
}
// Grab the initial video again.
if (TheoraPlay.THEORAPLAY_hasVideoStream(Video.theoraDecoder) != 0)
{
currentVideo = TheoraPlay.getVideoFrame(Video.videoStream);
previousFrame = Video.videoStream;
do
{
// The decoder miiight not be ready yet.
Video.videoStream = TheoraPlay.THEORAPLAY_getVideo(Video.theoraDecoder);
} while (Video.videoStream == IntPtr.Zero);
nextVideo = TheoraPlay.getVideoFrame(Video.videoStream);
}
// Start! Again!
timer.Start();
if (audioStream != null)
{
audioStream.Play();
}
}
else
{
// Stop everything, clean up. We out.
State = MediaState.Stopped;
if (audioStream != null)
{
audioStream.Stop();
audioStream.Dispose();
audioStream = null;
}
TheoraPlay.THEORAPLAY_freeVideo(previousFrame);
Video.AttachedToPlayer = false;
Video.Dispose();
// We're done, so give them the last frame.
return(videoTexture);
}
}
}
#if VIDEOPLAYER_OPENGL
// Set up an environment to muck about in.
GL_pushState();
// Bind our shader program.
currentDevice.GLDevice.glUseProgram(shaderProgram);
// We're using client-side arrays like CAVEMEN
currentDevice.GLDevice.BindVertexBuffer(OpenGLDevice.OpenGLVertexBuffer.NullBuffer);
// Set up the vertex pointers/arrays.
currentDevice.GLDevice.AttributeEnabled[0] = true;
currentDevice.GLDevice.AttributeEnabled[1] = true;
for (int i = 2; i < currentDevice.GLDevice.AttributeEnabled.Length; i += 1)
{
currentDevice.GLDevice.AttributeEnabled[i] = false;
}
currentDevice.GLDevice.FlushGLVertexAttributes();
currentDevice.GLDevice.VertexAttribPointer(
0,
2,
VertexElementFormat.Single,
false,
2 * sizeof(float),
vertPosPtr
);
currentDevice.GLDevice.VertexAttribPointer(
1,
2,
VertexElementFormat.Single,
false,
2 * sizeof(float),
vertTexPtr
);
// Bind our target framebuffer.
currentDevice.GLDevice.BindDrawFramebuffer(rgbaFramebuffer);
// Prepare YUV GL textures with our current frame data
currentDevice.GLDevice.glActiveTexture(
OpenGLDevice.GLenum.GL_TEXTURE0
);
currentDevice.GLDevice.glBindTexture(
OpenGLDevice.GLenum.GL_TEXTURE_2D,
yuvTextures[0]
);
currentDevice.GLDevice.glTexSubImage2D(
OpenGLDevice.GLenum.GL_TEXTURE_2D,
0,
0,
0,
(int)currentVideo.width,
(int)currentVideo.height,
OpenGLDevice.GLenum.GL_LUMINANCE,
OpenGLDevice.GLenum.GL_UNSIGNED_BYTE,
currentVideo.pixels
);
currentDevice.GLDevice.glActiveTexture(
OpenGLDevice.GLenum.GL_TEXTURE0 + 1
);
currentDevice.GLDevice.glBindTexture(
OpenGLDevice.GLenum.GL_TEXTURE_2D,
yuvTextures[1]
);
currentDevice.GLDevice.glTexSubImage2D(
OpenGLDevice.GLenum.GL_TEXTURE_2D,
0,
0,
0,
(int)(currentVideo.width / 2),
(int)(currentVideo.height / 2),
OpenGLDevice.GLenum.GL_LUMINANCE,
OpenGLDevice.GLenum.GL_UNSIGNED_BYTE,
new IntPtr(
currentVideo.pixels.ToInt64() +
(currentVideo.width * currentVideo.height)
)
);
currentDevice.GLDevice.glActiveTexture(
OpenGLDevice.GLenum.GL_TEXTURE0 + 2
);
currentDevice.GLDevice.glBindTexture(
OpenGLDevice.GLenum.GL_TEXTURE_2D,
yuvTextures[2]
);
currentDevice.GLDevice.glTexSubImage2D(
OpenGLDevice.GLenum.GL_TEXTURE_2D,
0,
0,
0,
(int)(currentVideo.width / 2),
(int)(currentVideo.height / 2),
OpenGLDevice.GLenum.GL_LUMINANCE,
OpenGLDevice.GLenum.GL_UNSIGNED_BYTE,
new IntPtr(
currentVideo.pixels.ToInt64() +
(currentVideo.width * currentVideo.height) +
(currentVideo.width / 2 * currentVideo.height / 2)
)
);
// Flip the viewport, because loldirectx
currentDevice.GLDevice.glViewport(
0,
0,
(int)currentVideo.width,
(int)currentVideo.height
);
// Draw the YUV textures to the framebuffer with our shader.
currentDevice.GLDevice.glDrawArrays(
OpenGLDevice.GLenum.GL_TRIANGLE_STRIP,
0,
4
);
// Clean up after ourselves.
GL_popState();
#else
// Just copy it to an array, since it's RGBA anyway.
try
{
byte[] theoraPixels = TheoraPlay.getPixels(
currentVideo.pixels,
(int)currentVideo.width * (int)currentVideo.height * 4
);
// TexImage2D.
videoTexture.SetData <byte>(theoraPixels);
}
catch (Exception e)
{
// I hope we've still got something in videoTexture!
System.Console.WriteLine(
"WARNING: THEORA FRAME COPY FAILED: " +
e.Message
);
}
#endif
return(videoTexture);
}
public Texture2D GetTexture()
{
checkDisposed();
// Be sure we can even get something from TheoraPlay...
if (State == MediaState.Stopped ||
Video.theoraDecoder == IntPtr.Zero ||
TheoraPlay.THEORAPLAY_isInitialized(Video.theoraDecoder) == 0 ||
TheoraPlay.THEORAPLAY_hasVideoStream(Video.theoraDecoder) == 0)
{
// Screw it, give them the old one.
return(videoTexture[0].RenderTarget as Texture2D);
}
// Get the latest video frames.
bool missedFrame = false;
while (nextVideo.playms <= timer.ElapsedMilliseconds && !missedFrame)
{
currentVideo = nextVideo;
IntPtr nextFrame = TheoraPlay.THEORAPLAY_getVideo(Video.theoraDecoder);
if (nextFrame != IntPtr.Zero)
{
TheoraPlay.THEORAPLAY_freeVideo(previousFrame);
previousFrame = Video.videoStream;
Video.videoStream = nextFrame;
nextVideo = TheoraPlay.getVideoFrame(Video.videoStream);
missedFrame = false;
}
else
{
// Don't mind me, just ignoring that complete failure above!
missedFrame = true;
}
if (TheoraPlay.THEORAPLAY_isDecoding(Video.theoraDecoder) == 0)
{
// FIXME: This is part of the Duration hack!
Video.Duration = new TimeSpan(0, 0, 0, 0, (int)currentVideo.playms);
// Stop and reset the timer. If we're looping, the loop will start it again.
timer.Stop();
timer.Reset();
// If looping, go back to the start. Otherwise, we'll be exiting.
if (IsLooped && State == MediaState.Playing)
{
// Kill the audio, no matter what.
if (audioStream != null)
{
audioStream.Stop();
audioStream.Dispose();
audioStream = null;
}
// Free everything and start over.
TheoraPlay.THEORAPLAY_freeVideo(previousFrame);
previousFrame = IntPtr.Zero;
Video.AttachedToPlayer = false;
Video.Dispose();
Video.AttachedToPlayer = true;
Video.Initialize();
// Grab the initial audio again.
if (TheoraPlay.THEORAPLAY_hasAudioStream(Video.theoraDecoder) != 0)
{
InitAudioStream();
}
// Grab the initial video again.
if (TheoraPlay.THEORAPLAY_hasVideoStream(Video.theoraDecoder) != 0)
{
currentVideo = TheoraPlay.getVideoFrame(Video.videoStream);
previousFrame = Video.videoStream;
do
{
// The decoder miiight not be ready yet.
Video.videoStream = TheoraPlay.THEORAPLAY_getVideo(Video.theoraDecoder);
} while (Video.videoStream == IntPtr.Zero);
nextVideo = TheoraPlay.getVideoFrame(Video.videoStream);
}
// Start! Again!
timer.Start();
if (audioStream != null)
{
audioStream.Play();
}
}
else
{
// Stop everything, clean up. We out.
State = MediaState.Stopped;
if (audioStream != null)
{
audioStream.Stop();
audioStream.Dispose();
audioStream = null;
}
TheoraPlay.THEORAPLAY_freeVideo(previousFrame);
Video.AttachedToPlayer = false;
Video.Dispose();
// We're done, so give them the last frame.
return(videoTexture[0].RenderTarget as Texture2D);
}
}
}
// Set up an environment to muck about in.
GL_pushState();
// Prepare YUV GL textures with our current frame data
currentDevice.GLDevice.SetTextureData2DPointer(
yuvTextures[0],
currentVideo.pixels
);
currentDevice.GLDevice.SetTextureData2DPointer(
yuvTextures[1],
new IntPtr(
currentVideo.pixels.ToInt64() +
(currentVideo.width * currentVideo.height)
)
);
currentDevice.GLDevice.SetTextureData2DPointer(
yuvTextures[2],
new IntPtr(
currentVideo.pixels.ToInt64() +
(currentVideo.width * currentVideo.height) +
(currentVideo.width / 2 * currentVideo.height / 2)
)
);
// Draw the YUV textures to the framebuffer with our shader.
currentDevice.DrawPrimitives(
PrimitiveType.TriangleStrip,
0,
2
);
// Clean up after ourselves.
GL_popState();
// Finally.
return(videoTexture[0].RenderTarget as Texture2D);
}
public void Play(Video video)
{
checkDisposed();
// We need to assign this regardless of what happens next.
Video = video;
Video.AttachedToPlayer = true;
// FIXME: This is a part of the Duration hack!
if (Video.needsDurationHack)
{
Video.Duration = TimeSpan.MaxValue;
}
// Check the player state before attempting anything.
if (State != MediaState.Stopped)
{
return;
}
// Update the player state now, before initializing
State = MediaState.Playing;
// Hook up the decoder to this player
InitializeTheoraStream();
// Set up the texture data
if (TheoraPlay.THEORAPLAY_hasVideoStream(Video.theoraDecoder) != 0)
{
// The VideoPlayer will use the GraphicsDevice that is set now.
if (currentDevice != Video.GraphicsDevice)
{
GL_dispose();
currentDevice = Video.GraphicsDevice;
GL_initialize();
}
RenderTargetBinding overlap = videoTexture[0];
videoTexture[0] = new RenderTargetBinding(
new RenderTarget2D(
currentDevice,
(int)currentVideo.width,
(int)currentVideo.height,
false,
SurfaceFormat.Color,
DepthFormat.None,
0,
RenderTargetUsage.PreserveContents
)
);
if (overlap.RenderTarget != null)
{
overlap.RenderTarget.Dispose();
}
GL_setupTextures(
(int)currentVideo.width,
(int)currentVideo.height
);
}
// The player can finally start now!
FNALoggerEXT.LogInfo("Starting Theora player...");
timer.Start();
if (audioStream != null)
{
audioStream.Play();
}
FNALoggerEXT.LogInfo("Started!");
}
public Texture2D GetTexture()
{
checkDisposed();
if (Video == null)
{
throw new InvalidOperationException();
}
// Be sure we can even get something from TheoraPlay...
if (State == MediaState.Stopped ||
Video.theoraDecoder == IntPtr.Zero ||
TheoraPlay.THEORAPLAY_isInitialized(Video.theoraDecoder) == 0 ||
TheoraPlay.THEORAPLAY_hasVideoStream(Video.theoraDecoder) == 0)
{
// Screw it, give them the old one.
return(videoTexture[0].RenderTarget as Texture2D);
}
// Get the latest video frames.
bool hasFrames = true;
while (nextVideo.playms <= timer.ElapsedMilliseconds && hasFrames)
{
currentVideo = nextVideo;
hasFrames = TheoraPlay.THEORAPLAY_availableVideo(Video.theoraDecoder) > 0;
if (hasFrames)
{
IntPtr nextFrame = TheoraPlay.THEORAPLAY_getVideo(Video.theoraDecoder);
TheoraPlay.THEORAPLAY_freeVideo(previousFrame);
previousFrame = Video.videoStream;
Video.videoStream = nextFrame;
nextVideo = TheoraPlay.getVideoFrame(Video.videoStream);
}
}
// Check for the end...
if (TheoraPlay.THEORAPLAY_isDecoding(Video.theoraDecoder) == 0)
{
// FIXME: This is part of the Duration hack!
if (Video.needsDurationHack)
{
Video.Duration = new TimeSpan(0, 0, 0, 0, (int)currentVideo.playms);
}
// Stop and reset the timer. If we're looping, the loop will start it again.
timer.Stop();
timer.Reset();
// Kill whatever audio/video we've got
if (audioStream != null)
{
audioStream.Stop();
audioStream.Dispose();
audioStream = null;
}
TheoraPlay.THEORAPLAY_freeVideo(previousFrame);
Video.AttachedToPlayer = false;
Video.Dispose();
// If looping, go back to the start. Otherwise, we'll be exiting.
if (IsLooped && State == MediaState.Playing)
{
// Starting over!
Video.AttachedToPlayer = true;
InitializeTheoraStream();
// Start! Again!
timer.Start();
if (audioStream != null)
{
audioStream.Play();
}
}
else
{
// We out, give them the last frame.
State = MediaState.Stopped;
return(videoTexture[0].RenderTarget as Texture2D);
}
}
// Set up an environment to muck about in.
GL_pushState();
// Prepare YUV GL textures with our current frame data
currentDevice.GLDevice.SetTextureData2DPointer(
yuvTextures[0],
currentVideo.pixels
);
currentDevice.GLDevice.SetTextureData2DPointer(
yuvTextures[1],
new IntPtr(
currentVideo.pixels.ToInt64() +
(currentVideo.width * currentVideo.height)
)
);
currentDevice.GLDevice.SetTextureData2DPointer(
yuvTextures[2],
new IntPtr(
currentVideo.pixels.ToInt64() +
(currentVideo.width * currentVideo.height) +
(currentVideo.width / 2 * currentVideo.height / 2)
)
);
// Draw the YUV textures to the framebuffer with our shader.
currentDevice.DrawPrimitives(
PrimitiveType.TriangleStrip,
0,
2
);
// Clean up after ourselves.
GL_popState();
// Finally.
return(videoTexture[0].RenderTarget as Texture2D);
}