private void DisposeDirectXHook()
{
if (_directXHook != null)
{
try
{
_interface.Message(MessageType.Debug, "Disposing of hooks...");
}
catch (RemotingException)
{
} // Ignore channel remoting errors
// Dispose of the hooks so they are removed
_directXHook.Dispose();
_directXHook = null;
}
}
private bool InitialiseDirectXHook(CaptureConfig config)
{
Direct3DVersion version = config.Direct3DVersion;
List <Direct3DVersion> loadedVersions = new List <Direct3DVersion>();
bool isX64Process = EasyHook.RemoteHooking.IsX64Process(EasyHook.RemoteHooking.GetCurrentProcessId());
_interface.Message(MessageType.Information, "Remote process is a {0}-bit process.", isX64Process ? "64" : "32");
try
{
if (version == Direct3DVersion.AutoDetect)
{
// Attempt to determine the correct version based on loaded module.
// In most cases this will work fine, however it is perfectly ok for an application to use a D3D10 device along with D3D11 devices
// so the version might matched might not be the one you want to use
IntPtr d3D9Loaded = IntPtr.Zero;
IntPtr d3D10Loaded = IntPtr.Zero;
IntPtr d3D10_1Loaded = IntPtr.Zero;
IntPtr d3D11Loaded = IntPtr.Zero;
IntPtr d3D11_1Loaded = IntPtr.Zero;
int delayTime = 100;
int retryCount = 0;
while (d3D9Loaded == IntPtr.Zero && d3D10Loaded == IntPtr.Zero && d3D10_1Loaded == IntPtr.Zero && d3D11Loaded == IntPtr.Zero && d3D11_1Loaded == IntPtr.Zero)
{
retryCount++;
d3D9Loaded = NativeMethods.GetModuleHandle("d3d9.dll");
d3D10Loaded = NativeMethods.GetModuleHandle("d3d10.dll");
d3D10_1Loaded = NativeMethods.GetModuleHandle("d3d10_1.dll");
d3D11Loaded = NativeMethods.GetModuleHandle("d3d11.dll");
d3D11_1Loaded = NativeMethods.GetModuleHandle("d3d11_1.dll");
System.Threading.Thread.Sleep(delayTime);
if (retryCount * delayTime > 5000)
{
_interface.Message(MessageType.Error, "Unsupported Direct3D version, or Direct3D DLL not loaded within 5 seconds.");
return(false);
}
}
version = Direct3DVersion.Unknown;
if (d3D11_1Loaded != IntPtr.Zero)
{
_interface.Message(MessageType.Debug, "Autodetect found Direct3D 11.1");
version = Direct3DVersion.Direct3D11_1;
loadedVersions.Add(version);
}
if (d3D11Loaded != IntPtr.Zero)
{
_interface.Message(MessageType.Debug, "Autodetect found Direct3D 11");
version = Direct3DVersion.Direct3D11;
loadedVersions.Add(version);
}
if (d3D10_1Loaded != IntPtr.Zero)
{
_interface.Message(MessageType.Debug, "Autodetect found Direct3D 10.1");
version = Direct3DVersion.Direct3D10_1;
loadedVersions.Add(version);
}
if (d3D10Loaded != IntPtr.Zero)
{
_interface.Message(MessageType.Debug, "Autodetect found Direct3D 10");
version = Direct3DVersion.Direct3D10;
loadedVersions.Add(version);
}
if (d3D9Loaded != IntPtr.Zero)
{
_interface.Message(MessageType.Debug, "Autodetect found Direct3D 9");
version = Direct3DVersion.Direct3D9;
loadedVersions.Add(version);
}
}
foreach (var dxVersion in loadedVersions)
{
version = dxVersion;
switch (version)
{
case Direct3DVersion.Direct3D9:
_directXHook = new DXHookD3D9(_interface);
break;
case Direct3DVersion.Direct3D10:
_directXHook = new DXHookD3D10(_interface);
break;
case Direct3DVersion.Direct3D10_1:
_directXHook = new DXHookD3D10_1(_interface);
break;
case Direct3DVersion.Direct3D11:
_directXHook = new DXHookD3D11(_interface);
break;
//case Direct3DVersion.Direct3D11_1:
// _directXHook = new DXHookD3D11_1(_interface);
// return;
default:
_interface.Message(MessageType.Error, "Unsupported Direct3D version: {0}", version);
return(false);
}
_directXHook.Config = config;
_directXHook.Hook();
_directXHooks.Add(_directXHook);
}
return(true);
}
catch (Exception e)
{
// Notify the host/server application about this error
_interface.Message(MessageType.Error, "Error in InitialiseHook: {0}", e.ToString());
return(false);
}
}
private bool InitialiseDirectXHook(CaptureConfig config)
{
Direct3DVersion version = config.Direct3DVersion;
List<Direct3DVersion> loadedVersions = new List<Direct3DVersion>();
bool isX64Process = EasyHook.RemoteHooking.IsX64Process(EasyHook.RemoteHooking.GetCurrentProcessId());
_interface.Message(MessageType.Information, "Remote process is a {0}-bit process.", isX64Process ? "64" : "32");
try
{
if (version == Direct3DVersion.AutoDetect)
{
// Attempt to determine the correct version based on loaded module.
// In most cases this will work fine, however it is perfectly ok for an application to use a D3D10 device along with D3D11 devices
// so the version might matched might not be the one you want to use
IntPtr d3D9Loaded = IntPtr.Zero;
IntPtr d3D10Loaded = IntPtr.Zero;
IntPtr d3D10_1Loaded = IntPtr.Zero;
IntPtr d3D11Loaded = IntPtr.Zero;
IntPtr d3D11_1Loaded = IntPtr.Zero;
int delayTime = 100;
int retryCount = 0;
while (d3D9Loaded == IntPtr.Zero && d3D10Loaded == IntPtr.Zero && d3D10_1Loaded == IntPtr.Zero && d3D11Loaded == IntPtr.Zero && d3D11_1Loaded == IntPtr.Zero)
{
retryCount++;
d3D9Loaded = NativeMethods.GetModuleHandle("d3d9.dll");
d3D10Loaded = NativeMethods.GetModuleHandle("d3d10.dll");
d3D10_1Loaded = NativeMethods.GetModuleHandle("d3d10_1.dll");
d3D11Loaded = NativeMethods.GetModuleHandle("d3d11.dll");
d3D11_1Loaded = NativeMethods.GetModuleHandle("d3d11_1.dll");
System.Threading.Thread.Sleep(delayTime);
if (retryCount * delayTime > 5000)
{
_interface.Message(MessageType.Error, "Unsupported Direct3D version, or Direct3D DLL not loaded within 5 seconds.");
return false;
}
}
version = Direct3DVersion.Unknown;
if (d3D11_1Loaded != IntPtr.Zero)
{
_interface.Message(MessageType.Debug, "Autodetect found Direct3D 11.1");
version = Direct3DVersion.Direct3D11_1;
loadedVersions.Add(version);
}
if (d3D11Loaded != IntPtr.Zero)
{
_interface.Message(MessageType.Debug, "Autodetect found Direct3D 11");
version = Direct3DVersion.Direct3D11;
loadedVersions.Add(version);
}
if (d3D10_1Loaded != IntPtr.Zero)
{
_interface.Message(MessageType.Debug, "Autodetect found Direct3D 10.1");
version = Direct3DVersion.Direct3D10_1;
loadedVersions.Add(version);
}
if (d3D10Loaded != IntPtr.Zero)
{
_interface.Message(MessageType.Debug, "Autodetect found Direct3D 10");
version = Direct3DVersion.Direct3D10;
loadedVersions.Add(version);
}
if (d3D9Loaded != IntPtr.Zero)
{
_interface.Message(MessageType.Debug, "Autodetect found Direct3D 9");
version = Direct3DVersion.Direct3D9;
loadedVersions.Add(version);
}
}
foreach (var dxVersion in loadedVersions)
{
version = dxVersion;
switch (version)
{
case Direct3DVersion.Direct3D9:
_directXHook = new DXHookD3D9(_interface);
break;
case Direct3DVersion.Direct3D10:
_directXHook = new DXHookD3D10(_interface);
break;
case Direct3DVersion.Direct3D10_1:
_directXHook = new DXHookD3D10_1(_interface);
break;
case Direct3DVersion.Direct3D11:
_directXHook = new DXHookD3D11(_interface);
break;
//case Direct3DVersion.Direct3D11_1:
// _directXHook = new DXHookD3D11_1(_interface);
// return;
default:
_interface.Message(MessageType.Error, "Unsupported Direct3D version: {0}", version);
return false;
}
_directXHook.Config = config;
_directXHook.Hook();
_directXHooks.Add(_directXHook);
}
return true;
}
catch (Exception e)
{
// Notify the host/server application about this error
_interface.Message(MessageType.Error, "Error in InitialiseHook: {0}", e.ToString());
return false;
}
}
/// <summary>
/// Called by EasyHook to begin any hooking etc in the target process
/// </summary>
/// <param name="InContext"></param>
/// <param name="channelName"></param>
/// <param name="strVersion">Direct3DVersion passed as a string so that GAC registration is not required</param>
/// <param name="showOverlay">Whether or not to show an overlay</param>
public void Run(
RemoteHooking.IContext InContext,
String channelName,
String strVersion,
bool showOverlay)
{
Direct3DVersion version = (Direct3DVersion)Enum.Parse(typeof(Direct3DVersion), strVersion);
// NOTE: We are now already running within the target process
try
{
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), "DLL Injection succeeded");
bool isX64Process = RemoteHooking.IsX64Process(RemoteHooking.GetCurrentProcessId());
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), "64-bit Process: " + isX64Process.ToString());
if (version == Direct3DVersion.AutoDetect)
{
// Attempt to determine the correct version based on loaded module.
// In most cases this will work fine, however it is perfectly ok for an application to use a D3D10 device along with D3D11 devices
// so the version might matched might not be the one you want to use
IntPtr d3D9Loaded = IntPtr.Zero;
IntPtr d3D10Loaded = IntPtr.Zero;
IntPtr d3D10_1Loaded = IntPtr.Zero;
IntPtr d3D11Loaded = IntPtr.Zero;
IntPtr d3D11_1Loaded = IntPtr.Zero;
int delayTime = 100;
int retryCount = 0;
while (d3D9Loaded == IntPtr.Zero && d3D10Loaded == IntPtr.Zero && d3D10_1Loaded == IntPtr.Zero && d3D11Loaded == IntPtr.Zero && d3D11_1Loaded == IntPtr.Zero)
{
retryCount++;
d3D9Loaded = GetModuleHandle("d3d9.dll");
d3D10Loaded = GetModuleHandle("d3d10.dll");
d3D10_1Loaded = GetModuleHandle("d3d10_1.dll");
d3D11Loaded = GetModuleHandle("d3d11.dll");
d3D11_1Loaded = GetModuleHandle("d3d11_1.dll");
Thread.Sleep(delayTime);
if (retryCount * delayTime > 5000)
{
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), "Unsupported Direct3DVersion, or Direct3D DLL not loaded within 5 seconds.");
return;
}
}
version = Direct3DVersion.Unknown;
if (d3D11_1Loaded != IntPtr.Zero)
{
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), "Autodetect found Direct3D 11.1");
version = Direct3DVersion.Direct3D11_1;
}
else if (d3D11Loaded != IntPtr.Zero)
{
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), "Autodetect found Direct3D 11");
version = Direct3DVersion.Direct3D11;
}
else if (d3D10_1Loaded != IntPtr.Zero)
{
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), "Autodetect found Direct3D 10.1");
version = Direct3DVersion.Direct3D10_1;
}
else if (d3D10Loaded != IntPtr.Zero)
{
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), "Autodetect found Direct3D 10");
version = Direct3DVersion.Direct3D10;
}
else if (d3D9Loaded != IntPtr.Zero)
{
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), "Autodetect found Direct3D 9");
version = Direct3DVersion.Direct3D9;
}
}
switch (version)
{
case Direct3DVersion.Direct3D9:
_directXHook = new DXHookD3D9(_interface);
break;
case Direct3DVersion.Direct3D10:
_directXHook = new DXHookD3D10(_interface);
break;
case Direct3DVersion.Direct3D10_1:
_directXHook = new DXHookD3D10_1(_interface);
break;
case Direct3DVersion.Direct3D11:
_directXHook = new DXHookD3D11(_interface);
break;
default:
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), "Unsupported Direct3DVersion");
break;
}
_directXHook.ShowOverlay = showOverlay;
_directXHook.Hook();
}
catch (Exception e)
{
/*
* We should notify our host process about this error...
*/
//_interface.ReportError(RemoteHooking.GetCurrentProcessId(), e);
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), "Exception during device creation and hooking: \r\n" + e.Message);
while (_interface.Ping(RemoteHooking.GetCurrentProcessId()))
{
Thread.Sleep(100);
}
return;
}
// Wait for host process termination...
try
{
// When not using GAC there can be issues with remoting assemblies resolving correctly
// this is a workaround that ensures that the current assembly is correctly associated
AppDomain currentDomain = AppDomain.CurrentDomain;
currentDomain.AssemblyResolve += (sender, args) =>
{
return(this.GetType().Assembly.FullName == args.Name ? this.GetType().Assembly : null);
};
while (_interface.Ping(RemoteHooking.GetCurrentProcessId()))
{
Thread.Sleep(10);
ScreenshotRequest request = _interface.GetScreenshotRequest(RemoteHooking.GetCurrentProcessId());
if (request != null)
{
_directXHook.Request = request;
}
}
}
catch
{
// .NET Remoting will raise an exception if host is unreachable
}
finally
{
try
{
_directXHook.Cleanup();
}
catch
{
}
}
}
/// <summary>
/// Called by EasyHook to begin any hooking etc in the target process
/// </summary>
/// <param name="InContext"></param>
/// <param name="channelName"></param>
/// <param name="strVersion">Direct3DVersion passed as a string so that GAC registration is not required</param>
/// <param name="showOverlay">Whether or not to show an overlay</param>
public void Run(
RemoteHooking.IContext InContext,
String channelName,
String strVersion,
bool showOverlay)
{
Direct3DVersion version = (Direct3DVersion)Enum.Parse(typeof(Direct3DVersion), strVersion);
// NOTE: We are now already running within the target process
try
{
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), "DLL Injection succeeded");
bool isX64Process = RemoteHooking.IsX64Process(RemoteHooking.GetCurrentProcessId());
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), "64-bit Process: " + isX64Process.ToString());
if (version == Direct3DVersion.AutoDetect)
{
// Attempt to determine the correct version based on loaded module.
// In most cases this will work fine, however it is perfectly ok for an application to use a D3D10 device along with D3D11 devices
// so the version might matched might not be the one you want to use
IntPtr d3D9Loaded = IntPtr.Zero;
IntPtr d3D10Loaded = IntPtr.Zero;
IntPtr d3D10_1Loaded = IntPtr.Zero;
IntPtr d3D11Loaded = IntPtr.Zero;
IntPtr d3D11_1Loaded = IntPtr.Zero;
int delayTime = 100;
int retryCount = 0;
while (d3D9Loaded == IntPtr.Zero && d3D10Loaded == IntPtr.Zero && d3D10_1Loaded == IntPtr.Zero && d3D11Loaded == IntPtr.Zero && d3D11_1Loaded == IntPtr.Zero)
{
retryCount++;
d3D9Loaded = GetModuleHandle("d3d9.dll");
d3D10Loaded = GetModuleHandle("d3d10.dll");
d3D10_1Loaded = GetModuleHandle("d3d10_1.dll");
d3D11Loaded = GetModuleHandle("d3d11.dll");
d3D11_1Loaded = GetModuleHandle("d3d11_1.dll");
Thread.Sleep(delayTime);
if (retryCount * delayTime > 5000)
{
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), "Unsupported Direct3DVersion, or Direct3D DLL not loaded within 5 seconds.");
return;
}
}
version = Direct3DVersion.Unknown;
if (d3D11_1Loaded != IntPtr.Zero)
{
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), "Autodetect found Direct3D 11.1");
version = Direct3DVersion.Direct3D11_1;
}
else if (d3D11Loaded != IntPtr.Zero)
{
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), "Autodetect found Direct3D 11");
version = Direct3DVersion.Direct3D11;
}
else if (d3D10_1Loaded != IntPtr.Zero)
{
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), "Autodetect found Direct3D 10.1");
version = Direct3DVersion.Direct3D10_1;
}
else if (d3D10Loaded != IntPtr.Zero)
{
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), "Autodetect found Direct3D 10");
version = Direct3DVersion.Direct3D10;
}
else if (d3D9Loaded != IntPtr.Zero)
{
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), "Autodetect found Direct3D 9");
version = Direct3DVersion.Direct3D9;
}
}
switch (version)
{
case Direct3DVersion.Direct3D9:
_directXHook = new DXHookD3D9(_interface);
break;
case Direct3DVersion.Direct3D10:
_directXHook = new DXHookD3D10(_interface);
break;
case Direct3DVersion.Direct3D10_1:
_directXHook = new DXHookD3D10_1(_interface);
break;
case Direct3DVersion.Direct3D11:
_directXHook = new DXHookD3D11(_interface);
break;
//case Direct3DVersion.Direct3D11_1:
// _directXHook = new DXHookD3D11_1(_interface);
// return;
default:
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), "Unsupported Direct3DVersion");
Thread.Sleep(100); // Sleep long enough for the message to be received
return;
}
_directXHook.ShowOverlay = showOverlay;
_directXHook.Hook();
}
catch (Exception e)
{
/*
We should notify our host process about this error...
*/
_interface.ReportError(RemoteHooking.GetCurrentProcessId(), e);
return;
}
// Wait for host process termination...
try
{
// When not using GAC there can be issues with remoting assemblies resolving correctly
// this is a workaround that ensures that the current assembly is correctly associated
AppDomain currentDomain = AppDomain.CurrentDomain;
currentDomain.AssemblyResolve += (sender, args) =>
{
return this.GetType().Assembly.FullName == args.Name ? this.GetType().Assembly : null;
};
while (_interface.Ping(RemoteHooking.GetCurrentProcessId()))
{
try
{
//ObjRef req = _interface.GetScreenshotRequestMarshalTest(RemoteHooking.GetCurrentProcessId());
ScreenshotRequest request = _interface.GetScreenshotRequest(RemoteHooking.GetCurrentProcessId());
//ScreenshotRequest request = null;
if (request != null)
{
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), String.Format("Request received by remote process ({0})", request.RequestId));
_directXHook.Request = request;
}
Thread.Sleep(5);
}
catch (Exception e)
{
try
{
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), String.Format("Exception occured ({0})", e.Message));
}
catch
{
}
}
}
}
catch
{
// .NET Remoting will raise an exception if host is unreachable
}
finally
{
try
{
_directXHook.Cleanup();
}
catch
{
}
}
}
private void DisposeDirectXHook()
{
if (_directXHook != null)
{
try
{
_interface.Message(MessageType.Debug, "Disposing of hooks...");
}
catch (RemotingException)
{
} // Ignore channel remoting errors
// Dispose of the hooks so they are removed
_directXHook.Dispose();
_directXHook = null;
}
}
/// <summary>
/// Called by EasyHook to begin any hooking etc in the target process
/// </summary>
/// <param name="InContext"></param>
/// <param name="channelName"></param>
/// <param name="strVersion">Direct3DVersion passed as a string so that GAC registration is not required</param>
/// <param name="showOverlay">Whether or not to show an overlay</param>
public void Run(RemoteHooking.IContext InContext, String channelName, String strVersion, bool showOverlay)
{
Direct3DVersion version = (Direct3DVersion)Enum.Parse(typeof(Direct3DVersion), strVersion);
// NOTE: We are now already running within the target process
try
{
v = strVersion;
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), "DLL Injection succeeded");
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), DateTime.Now.ToString() + ":" + DateTime.Now.Millisecond.ToString());
bool isX64Process = RemoteHooking.IsX64Process(RemoteHooking.GetCurrentProcessId());
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), "64-bit Process: " + isX64Process.ToString());
if (version == Direct3DVersion.Di) {
_directXHookDI = new DXHookDi(_interface); _directXHookDI.Hook();
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), "DI Initialized");
}
if (version == Direct3DVersion.AutoDetect || version == Direct3DVersion.Di)
{
// Attempt to determine the correct version based on loaded module.
// In most cases this will work fine, however it is perfectly ok for an application to use a D3D10 device along with D3D11 devices
// so the version might matched might not be the one you want to use
IntPtr ddLoaded = IntPtr.Zero;
IntPtr oglLoaded = IntPtr.Zero;
IntPtr gdiLoaded = IntPtr.Zero;
IntPtr d3D9Loaded = IntPtr.Zero;
IntPtr d3D10Loaded = IntPtr.Zero;
IntPtr d3D10_1Loaded = IntPtr.Zero;
IntPtr d3D11Loaded = IntPtr.Zero;
IntPtr d3D11_1Loaded = IntPtr.Zero;
int delayTime = 100;
int retryCount = 0;
while (ddLoaded == IntPtr.Zero && d3D9Loaded == IntPtr.Zero && d3D10Loaded == IntPtr.Zero && d3D10_1Loaded == IntPtr.Zero && d3D11Loaded == IntPtr.Zero && d3D11_1Loaded == IntPtr.Zero)
{
retryCount++;
ddLoaded = GetModuleHandle("ddraw.dll");
oglLoaded = GetModuleHandle("opengl32.dll");
gdiLoaded = GetModuleHandle("gdi32.dll");
d3D9Loaded = GetModuleHandle("d3d9.dll");
d3D10Loaded = GetModuleHandle("d3d10.dll");
d3D10_1Loaded = GetModuleHandle("d3d10_1.dll");
d3D11Loaded = GetModuleHandle("d3d11.dll");
d3D11_1Loaded = GetModuleHandle("d3d11_1.dll");
Thread.Sleep(delayTime);
if (retryCount * delayTime > 5000)
{
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), "Unsupported Direct3DVersion, or Direct3D DLL not loaded within 5 seconds.");
return;
}
}
version = Direct3DVersion.Unknown;
if (d3D11_1Loaded != IntPtr.Zero)
{
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), "Autodetect found Direct3D 11.1");
version = Direct3DVersion.Direct3D11_1;
}
else if (d3D11Loaded != IntPtr.Zero)
{
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), "Autodetect found Direct3D 11");
version = Direct3DVersion.Direct3D11;
_directXHook = new DXHookD3D11(_interface);
}
else if (d3D10_1Loaded != IntPtr.Zero)
{
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), "Autodetect found Direct3D 10.1");
version = Direct3DVersion.Direct3D10_1;
_directXHook = new DXHookD3D10_1(_interface);
}
else if (d3D10Loaded != IntPtr.Zero)
{
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), "Autodetect found Direct3D 10");
version = Direct3DVersion.Direct3D10;
_directXHook = new DXHookD3D10(_interface);
}
else if (d3D9Loaded != IntPtr.Zero)
{
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), "Autodetect found Direct3D 9");
version = Direct3DVersion.Direct3D9;
_directXHook = new DXHookD3D9(_interface);
}
else if (oglLoaded != IntPtr.Zero && gdiLoaded != IntPtr.Zero)
{
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), "Autodetect found OPENGL+GDI");
version = Direct3DVersion.OGL;
_directXHook = new DXHookOGL(_interface);
}
else if (ddLoaded != IntPtr.Zero)
{
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), "Autodetect found DDRAW");
version = Direct3DVersion.DDraw;
_directXHook = new DXHookDD(_interface);
}
//else {_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), "Unsupported Direct3DVersion");}
}
_directXHook.ShowOverlay = showOverlay;
_directXHook.Hook();
}
catch (Exception e)
{
/*
We should notify our host process about this error...
*/
//_interface.ReportError(RemoteHooking.GetCurrentProcessId(), e);
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(),"Exception during device creation and hooking: \r\n" + e.Message);
while (_interface.Ping(RemoteHooking.GetCurrentProcessId())) {Thread.Sleep(100);}
return;
}
// Wait for host process termination...
try
{
// When not using GAC there can be issues with remoting assemblies resolving correctly
// this is a workaround that ensures that the current assembly is correctly associated
AppDomain currentDomain = AppDomain.CurrentDomain;
currentDomain.AssemblyResolve += (sender, args) =>
{
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), "Searching: " + args.Name);
return this.GetType().Assembly.FullName == args.Name ? this.GetType().Assembly : null;
};
while (_interface.Ping(RemoteHooking.GetCurrentProcessId()))
{
Thread.Sleep(10);
ScreenshotRequest request = _interface.GetScreenshotRequest(RemoteHooking.GetCurrentProcessId());
byte[] updateimg = _interface.GetUpdateRequest(RemoteHooking.GetCurrentProcessId());
if (request != null)
{
_directXHook.Request = request;
}
if (updateimg != null)
{
_directXHook.idxhookUpdateimg = updateimg;
if (_directXHookDI != null) _directXHookDI.idxhookUpdateimg = updateimg;
}
}
}
catch
{
// .NET Remoting will raise an exception if host is unreachable
}
finally
{
try
{
_directXHook.Cleanup();
}
catch
{
}
}
}
/// <summary>
/// Called by EasyHook to begin any hooking etc in the target process
/// </summary>
/// <param name="InContext"></param>
/// <param name="InArg1"></param>
public void Run(
RemoteHooking.IContext InContext,
String channelName,
Direct3DVersion version,
int VertexMode)
{
// NOTE: We are now already running within the target process
try
{
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), "DLL Injection succeeded");
bool isX64Process = RemoteHooking.IsX64Process(RemoteHooking.GetCurrentProcessId());
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), "64-bit Process: " + isX64Process.ToString());
switch (version)
{
case Direct3DVersion.Direct3D9:
_directXHook = new DXHookD3D9(_interface, VertexMode);
break;
case Direct3DVersion.Direct3D10:
_directXHook = new DXHookD3D10(_interface);
break;
//case Direct3DVersion.Direct3D10_1:
// _directXHook = new DXHookD3D10(_interface);
// break;
case Direct3DVersion.Direct3D11:
_directXHook = new DXHookD3D11(_interface);
break;
default:
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), "Unsupported Direct3DVersion");
break;
}
_directXHook.Hook();
}
catch (Exception e)
{
/*
We should notify our host process about this error...
*/
_interface.ReportError(RemoteHooking.GetCurrentProcessId(), e);
return;
}
// Wait for host process termination...
try
{
while (_interface.Ping(RemoteHooking.GetCurrentProcessId()))
{
Thread.Sleep(10);
ScreenshotRequest request = _interface.GetScreenshotRequest(RemoteHooking.GetCurrentProcessId());
if (request != null)
{
_directXHook.Request = request;
}
}
}
catch
{
// .NET Remoting will raise an exception if host is unreachable
}
finally
{
try
{
_directXHook.Cleanup();
}
catch
{
}
}
}
/// <summary>
/// Called by EasyHook to begin any hooking etc in the target process
/// </summary>
/// <param name="InContext"></param>
/// <param name="InArg1"></param>
public void Run(
RemoteHooking.IContext InContext,
String channelName,
Direct3DVersion version,
int VertexMode)
{
// NOTE: We are now already running within the target process
try
{
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), "DLL Injection succeeded");
bool isX64Process = RemoteHooking.IsX64Process(RemoteHooking.GetCurrentProcessId());
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), "64-bit Process: " + isX64Process.ToString());
switch (version)
{
case Direct3DVersion.Direct3D9:
_directXHook = new DXHookD3D9(_interface, VertexMode);
break;
case Direct3DVersion.Direct3D10:
_directXHook = new DXHookD3D10(_interface);
break;
//case Direct3DVersion.Direct3D10_1:
// _directXHook = new DXHookD3D10(_interface);
// break;
case Direct3DVersion.Direct3D11:
_directXHook = new DXHookD3D11(_interface);
break;
default:
_interface.OnDebugMessage(RemoteHooking.GetCurrentProcessId(), "Unsupported Direct3DVersion");
break;
}
_directXHook.Hook();
}
catch (Exception e)
{
/*
* We should notify our host process about this error...
*/
_interface.ReportError(RemoteHooking.GetCurrentProcessId(), e);
return;
}
// Wait for host process termination...
try
{
while (_interface.Ping(RemoteHooking.GetCurrentProcessId()))
{
Thread.Sleep(10);
ScreenshotRequest request = _interface.GetScreenshotRequest(RemoteHooking.GetCurrentProcessId());
if (request != null)
{
_directXHook.Request = request;
}
}
}
catch
{
// .NET Remoting will raise an exception if host is unreachable
}
finally
{
try
{
_directXHook.Cleanup();
}
catch
{
}
}
}
