/// <summary>
/// Scan an isolated token in the following "default" context :
/// - insideDataDivision = true
/// - decimalPointIsComma = false
/// - withDebuggingMode = false
/// - encodingForAlphanumericLiterals = IBM 1147
/// - default compiler options
/// </summary>
public static Token ScanIsolatedTokenInDefaultContext(string tokenText, out Diagnostic error)
{
TokensLine tempTokensLine = TokensLine.CreateVirtualLineForInsertedToken(0, tokenText);
tempTokensLine.InitializeScanState(new MultilineScanState(true, false, false, IBMCodePages.GetDotNetEncodingFromIBMCCSID(1147)));
Scanner tempScanner = new Scanner(tokenText, 0, tokenText.Length - 1, tempTokensLine, new TypeCobolOptions());
Token candidateToken = tempScanner.GetNextToken();
if(tempTokensLine.ScannerDiagnostics.Count > 0)
{
error = tempTokensLine.ScannerDiagnostics[0];
}
else
{
error = null;
}
return candidateToken;
}
/// <summary>
/// Incremental preprocessing of a set of tokens lines changes
/// </summary>
internal static IList<DocumentChange<IProcessedTokensLine>> ProcessTokensLinesChanges(TextSourceInfo textSourceInfo, ISearchableReadOnlyList<ProcessedTokensLine> documentLines, IList<DocumentChange<ITokensLine>> tokensLinesChanges, PrepareDocumentLineForUpdate prepareDocumentLineForUpdate, TypeCobolOptions compilerOptions, IProcessedTokensDocumentProvider processedTokensDocumentProvider)
{
// Collect all changes applied to the processed tokens lines during the incremental scan
IList<DocumentChange<IProcessedTokensLine>> processedTokensLinesChanges = new List<DocumentChange<IProcessedTokensLine>>();
// There are 2 reasons to a preprocess a tokens line after a change :
// 1. A tokens line changed : these lines were already reset during the previous steps
// 2. If a tokens line that changed was involved in the parsing of a multiline compiler directive, the whole group of lines must be parsed again
// Then, if a new COPY directive was parsed : the CompilationDocument to include must be prepared
// --- PREPARATION PHASE : reset all processed tokens lines which were involved in a multiline compiler directive where at least one line changed ---
// Iterate over all tokens changes detected by the ScannerStep :
// refresh all the adjacent lines participating in a ContinuationTokensGroup
if (tokensLinesChanges != null)
{
int lastLineIndexReset = -1;
foreach (DocumentChange<ITokensLine> tokensChange in tokensLinesChanges)
{
processedTokensLinesChanges.Add(new DocumentChange<IProcessedTokensLine>(tokensChange.Type, tokensChange.LineIndex, (IProcessedTokensLine)tokensChange.NewLine));
if (tokensChange.LineIndex > lastLineIndexReset)
{
lastLineIndexReset = CheckIfAdjacentLinesNeedRefresh(tokensChange.Type, tokensChange.LineIndex, documentLines, prepareDocumentLineForUpdate, processedTokensLinesChanges, lastLineIndexReset);
}
}
}
// --- COMPILER DIRECTIVES PHASE : Find and parse all compiler directives ---
// Init. Prepare a compiler directive parser
// Create a token iterator on top of tokens lines
TokensLinesIterator tokensIterator = new TokensLinesIterator(
textSourceInfo.Name,
documentLines,
null,
Token.CHANNEL_SourceTokens);
// Crate an Antlr compatible token source on top a the token iterator
TokensLinesTokenSource tokenSource = new TokensLinesTokenSource(
textSourceInfo.Name,
tokensIterator);
// Init a compiler directive parser
CommonTokenStream tokenStream = new TokensLinesTokenStream(tokenSource, Token.CHANNEL_SourceTokens);
CobolCompilerDirectivesParser directivesParser = new CobolCompilerDirectivesParser(tokenStream);
IAntlrErrorStrategy compilerDirectiveErrorStrategy = new CompilerDirectiveErrorStrategy();
directivesParser.ErrorHandler = compilerDirectiveErrorStrategy;
// Register all parse errors in a list in memory
DiagnosticSyntaxErrorListener errorListener = new DiagnosticSyntaxErrorListener();
directivesParser.RemoveErrorListeners();
directivesParser.AddErrorListener(errorListener);
// Prepare to analyze the parse tree
ParseTreeWalker walker = new ParseTreeWalker();
CompilerDirectiveBuilder directiveBuilder = new CompilerDirectiveBuilder();
// 1. Iterate over all compiler directive starting tokens found in the lines which were updated
foreach (Token compilerDirectiveStartingToken in documentLines
.Where(line => line.PreprocessingState == ProcessedTokensLine.PreprocessorState.NeedsCompilerDirectiveParsing)
.SelectMany(line => line.SourceTokens)
.Where(token => token.TokenFamily == TokenFamily.CompilerDirectiveStartingKeyword))
{
// 2. Reset the compiler directive parser state
// Reset tokens iterator position before parsing
// -> seek just before the compiler directive starting token
tokensIterator.SeekToToken(compilerDirectiveStartingToken);
tokensIterator.PreviousToken();
// Special case : for efficiency reasons, in EXEC SQL INCLUDE directives
// only the third token INCLUDE is recognized as a compiler directive
// starting keyword by the scanner. In this case, we must rewind the
// iterator two tokens backwards to start parsing just before the EXEC token.
if (compilerDirectiveStartingToken.TokenType == TokenType.EXEC_SQL_INCLUDE)
{
tokensIterator.PreviousToken();
tokensIterator.PreviousToken();
}
// Reset Antlr BufferedTokenStream position
tokenStream.SetTokenSource(tokenSource);
// Reset parsing error diagnostics
compilerDirectiveErrorStrategy.Reset(directivesParser);
errorListener.Diagnostics.Clear();
// 3. Try to parse a compiler directive starting with the current token
CobolCompilerDirectivesParser.CompilerDirectingStatementContext directiveParseTree = directivesParser.compilerDirectingStatement();
// 4. Visit the parse tree to build a first class object representing the compiler directive
walker.Walk(directiveBuilder, directiveParseTree);
CompilerDirective compilerDirective = directiveBuilder.CompilerDirective;
bool errorFoundWhileParsingDirective = errorListener.Diagnostics.Count > 0 || directiveBuilder.Diagnostics.Count > 0;
// 5. Get all tokens consumed while parsing the compiler directive
// and partition them line by line
Token startToken = (Token)directiveParseTree.Start;
Token stopToken = (Token)directiveParseTree.Stop;
if (stopToken == null) stopToken = startToken;
MultilineTokensGroupSelection tokensSelection = tokensIterator.SelectAllTokensBetween(startToken, stopToken);
if (compilerDirective != null)
{
// 6. Replace all matched tokens by :
// - a CompilerDirectiveToken on the first line
ProcessedTokensLine firstProcessedTokensLine = documentLines[tokensSelection.FirstLineIndex];
if (tokensSelection.SelectedTokensOnSeveralLines.Length == 1)
{
firstProcessedTokensLine.InsertCompilerDirectiveTokenOnFirstLine(
tokensSelection.TokensOnFirstLineBeforeStartToken,
compilerDirective, errorFoundWhileParsingDirective,
tokensSelection.SelectedTokensOnSeveralLines[0],
tokensSelection.TokensOnLastLineAfterStopToken, false);
}
else
{
TokensGroup continuedTokensGroup = firstProcessedTokensLine.InsertCompilerDirectiveTokenOnFirstLine(
tokensSelection.TokensOnFirstLineBeforeStartToken,
compilerDirective, errorFoundWhileParsingDirective,
tokensSelection.SelectedTokensOnSeveralLines[0],
null, true);
// - a ContinuationTokensGroup on the following lines
int selectionLineIndex = 1;
int lastLineIndex = tokensSelection.FirstLineIndex + tokensSelection.SelectedTokensOnSeveralLines.Length - 1;
for (int nextLineIndex = tokensSelection.FirstLineIndex + 1; nextLineIndex <= lastLineIndex; nextLineIndex++, selectionLineIndex++)
{
IList<Token> compilerDirectiveTokensOnNextLine = tokensSelection.SelectedTokensOnSeveralLines[selectionLineIndex];
if (compilerDirectiveTokensOnNextLine.Count > 0)
{
ProcessedTokensLine nextProcessedTokensLine = documentLines[nextLineIndex];
if (nextLineIndex != lastLineIndex)
{
continuedTokensGroup = nextProcessedTokensLine.InsertCompilerDirectiveTokenOnNextLine(
continuedTokensGroup,
compilerDirectiveTokensOnNextLine,
null, true);
}
else
{
continuedTokensGroup = nextProcessedTokensLine.InsertCompilerDirectiveTokenOnNextLine(
continuedTokensGroup,
compilerDirectiveTokensOnNextLine,
tokensSelection.TokensOnLastLineAfterStopToken, false);
}
}
}
}
}
// 7. Register compiler directive parse errors
if (errorFoundWhileParsingDirective)
{
ProcessedTokensLine compilerDirectiveLine = documentLines[tokensSelection.FirstLineIndex];
foreach (ParserDiagnostic parserDiag in errorListener.Diagnostics)
{
compilerDirectiveLine.AddDiagnostic(parserDiag);
}
foreach (Diagnostic directiveDiag in directiveBuilder.Diagnostics)
{
compilerDirectiveLine.AddDiagnostic(directiveDiag);
}
}
}
// 8. Advance the state off all ProcessedTokensLines :
// NeedsCompilerDirectiveParsing => NeedsCopyDirectiveProcessing if it contains a COPY directive
IList<ProcessedTokensLine> parsedLinesWithCopyDirectives = null;
// NeedsCompilerDirectiveParsing => Ready otherwise
foreach (ProcessedTokensLine parsedLine in documentLines
.Where(line => line.PreprocessingState == ProcessedTokensLine.PreprocessorState.NeedsCompilerDirectiveParsing))
{
if (parsedLine.ImportedDocuments != null)
{
if(parsedLinesWithCopyDirectives == null)
{
parsedLinesWithCopyDirectives = new List<ProcessedTokensLine>();
}
parsedLine.PreprocessingState = ProcessedTokensLine.PreprocessorState.NeedsCopyDirectiveProcessing;
parsedLinesWithCopyDirectives.Add(parsedLine);
}
else
{
parsedLine.PreprocessingState = ProcessedTokensLine.PreprocessorState.Ready;
}
}
// --- COPY IMPORT PHASE : Process COPY (REPLACING) directives ---
// 1. Iterate over all updated lines containing a new COPY directive
if (parsedLinesWithCopyDirectives != null)
{
foreach (ProcessedTokensLine tokensLineWithCopyDirective in parsedLinesWithCopyDirectives)
{
// Iterate over all COPY directives found on one updated line
foreach (CopyDirective copyDirective in tokensLineWithCopyDirective.ImportedDocuments.Keys.ToArray<CopyDirective>())
{
try
{
// Load (or retrieve in cache) the document referenced by the COPY directive
ProcessedTokensDocument importedDocumentSource = processedTokensDocumentProvider.GetProcessedTokensDocument(copyDirective.LibraryName, copyDirective.TextName);
// Store it on the current line after appying the REPLACING directive
ImportedTokensDocument importedDocument = new ImportedTokensDocument(copyDirective, importedDocumentSource);
tokensLineWithCopyDirective.ImportedDocuments[copyDirective] = importedDocument;
}
catch (Exception e)
{
// Text name refenced by COPY directive was not found
// => register a preprocessor error on this line
Token failedDirectiveToken = tokensLineWithCopyDirective.TokensWithCompilerDirectives
.Where(token => token.TokenType == TokenType.CopyImportDirective && ((CompilerDirectiveToken)token).CompilerDirective == copyDirective)
.First();
Diagnostic diag = new Diagnostic(
MessageCode.FailedToLoadTextDocumentReferencedByCopyDirective,
failedDirectiveToken.Column, failedDirectiveToken.EndColumn,
e.Message);
tokensLineWithCopyDirective.AddDiagnostic(diag);
}
}
// Advance processing status of the line
tokensLineWithCopyDirective.PreprocessingState = ProcessedTokensLine.PreprocessorState.Ready;
}
}
// --- REPLACE PHASE : REPLACE directives are implemented in ReplaceTokensLinesIterator ---
/* Algorithm :
*
* one REPLACE directive can express several replacement operations
* one replacement operation can be of several types (distinguished for optimization purposes)
* - SimpleTokenReplace : one source token / zero or one replacement token
* - PartialWordReplace : one pure partial word / zero or one replacement token
* - SimpleToMultipleTokenReplace : one source token / several replacement tokens
* - MultipleTokenReplace : one first + several following source tokens / zero to many replacement tokens
*
* an iterator maintains a current set of replacement operations
*
* if nextToken is replace directive
* the current set of replacement operations is updated
* else
* nextToken is compared to each replacement operation in turn
* if single -> single source token operation : return replacement token
* if single -> multiple operation : setup a secondary iterator with the list of replacement tokens
* if multiple -> multiple operation
* snapshot of the underlying iterator
* try to match all of the following source tokens
* if failure : restore snapshot and try next operation
* if success : setup a secondary iterator
*
* token comparison sourceToken / replacementCandidate :
* 1. Compare Token type
* 2. If same token type and for families
* AlphanumericLiteral
* NumericLiteral
* SyntaxLiteral
* Symbol
* => compare also Token text
*
* PartialCobolWord replacement :
* p535 : The COPY statement with REPLACING phrase can be used to replace parts of words.
* By inserting a dummy operand delimited by colons into the program text,
* the compiler will replace the dummy operand with the required text.
* Example 3 shows how this is used with the dummy operand :TAG:.
* The colons serve as separators and make TAG a stand-alone operand.
*/
return processedTokensLinesChanges;
}
private string ToJSON(int a, Diagnostic d)
{
var b = new StringBuilder("{");
newline(b, a+1, "");
kv(b, "ColumnStart", ""+d.ColumnStart);
newline(b, a+1, ",");
kv(b, "ColumnEnd", ""+d.ColumnEnd);
newline(b, a+1, ",");
kv(b, "Message", ""+"\""+d.Message+"\"");
newline(b, a+1, ",");
kv(b, "Code", ""+"\""+d.Info.Code+"\"");
newline(b, a+1, ",");
kv(b, "Severity", ""+"\""+d.Info.Severity+"\"");
newline(b, a+1, ",");
kv(b, "Category", ""+"\""+d.Info.Category+"\"");
newline(b, a, "");
return b.Append("}").ToString();
}
/// <summary>
/// Lazy initialization of diagnostics list
/// </summary>
internal void AddParserDiagnostic(Diagnostic diag)
{
// Lazy list instantiation
if (ParserDiagnostics == null)
{
ParserDiagnostics = new List<Diagnostic>();
}
ParserDiagnostics.Add(diag);
}
public override void EnterControlCblOption(CobolCompilerDirectivesParser.ControlCblOptionContext context)
{
string option = null;
TryGetUserDefinedWord(context.enumeratedValue1().UserDefinedWord(), ref option);
if (option != null)
{
ControlCblDirective.ControlCblOption optionValue;
if(Enum.TryParse<ControlCblDirective.ControlCblOption>(option, out optionValue))
{
((ControlCblDirective)CompilerDirective).OptionsList.Add(optionValue);
}
else
{
Token errorToken = ParseTreeUtils.GetTokenFromTerminalNode(context.enumeratedValue1().UserDefinedWord());
Diagnostic diag = new Diagnostic(
MessageCode.InvalidControlCblCompilerStatementOption,
errorToken.Column, errorToken.EndColumn,
option);
Diagnostics.Add(diag);
}
}
}
public override void EnterInsertCompilerStatement(CobolCompilerDirectivesParser.InsertCompilerStatementContext context)
{
InsertDirective insertDirective = new InsertDirective();
CompilerDirective = insertDirective;
if (context.sequenceNumber() != null && context.sequenceNumber().IntegerLiteral() != null)
{
insertDirective.SequenceNumber = (int)ParseTreeUtils.GetIntegerLiteral(context.sequenceNumber().IntegerLiteral());
if (insertDirective.SequenceNumber < 0) {
Token errorToken = ParseTreeUtils.GetTokenFromTerminalNode(context.sequenceNumber().IntegerLiteral());
Diagnostic error = new Diagnostic(
MessageCode.InvalidNumericLiteralFormat,
errorToken.Column, errorToken.EndColumn,
"TODO");
Diagnostics.Add(error);//TODO proper diagnostic error
}
}
}
