/// <summary>
/// Pull the description string from a part/assembly in a View.
/// </summary>
/// <param name="v">A View object.</param>
/// <returns>A description string.</returns>
public static string get_description(SolidWorks.Interop.sldworks.View v)
{
ModelDoc2 md = (ModelDoc2)v.ReferencedDocument;
ConfigurationManager cfMgr = md.ConfigurationManager;
Configuration cf = cfMgr.ActiveConfiguration;
CustomPropertyManager gcpm = md.Extension.get_CustomPropertyManager(string.Empty);
CustomPropertyManager scpm;
string _value = "PART";
string _resValue = string.Empty;
bool wasResolved;
bool useCached = false;
if (cf != null)
{
scpm = cf.CustomPropertyManager;
}
else
{
scpm = gcpm;
}
int res;
res = gcpm.Get5("Description", useCached, out _value, out _resValue, out wasResolved);
if (_value == string.Empty)
{
res = scpm.Get5("Description", useCached, out _value, out _resValue, out wasResolved);
}
return(_value);
}
public void hidebomtable()
{
SldWorks swApp = default(SldWorks);
ModelDoc2 swModel = default(ModelDoc2);
DrawingDoc swDraw = default(DrawingDoc);
SolidWorks.Interop.sldworks.View swView = default(SolidWorks.Interop.sldworks.View);
TableAnnotation swTableAnn = default(TableAnnotation);
Annotation swAnn = default(Annotation);
object[] vTableAnns = null;
int i = 0;
//swApp = CreateObject("SldWorks.Application")
swApp = (SldWorks)Marshal.GetActiveObject("SldWorks.Application");
swModel = swApp.ActiveDoc;
swDraw = (DrawingDoc)swModel;
swView = swDraw.GetFirstView();
vTableAnns = swView.GetTableAnnotations();
//vTableAnns.Length
if ((vTableAnns == null) == false)
{
for (i = 0; i <= vTableAnns.Length - 1; i++)
{
swTableAnn = (TableAnnotation)vTableAnns[i];
if (swTableAnn.Type == (int)swTableAnnotationType_e.swTableAnnotation_BillOfMaterials)
{
//swTableAnn.MoveColumn(0, swTableItemInsertPosition_e.swTableItemInsertPosition_After, 1)
swAnn = swTableAnn.GetAnnotation();
swAnn.Select3(false, null);
swApp.RunCommand((int)swCommands_e.swCommands_Hide_Table, null);
}
}
}
}
public static void InsertBOM(SldWorks swApp)
{
ModelDoc2 md = (ModelDoc2)swApp.ActiveDoc;
DrawingDoc dd = (DrawingDoc)swApp.ActiveDoc;
ModelDocExtension ex = (ModelDocExtension)md.Extension;
int bom_type = (int)swBomType_e.swBomType_PartsOnly;
int bom_numbering = (int)swNumberingType_e.swNumberingType_Flat;
int bom_anchor = (int)swBOMConfigurationAnchorType_e.swBOMConfigurationAnchor_TopLeft;
SolidWorks.Interop.sldworks.View v = GetFirstView(swApp);
BomTableAnnotation bta = null;
TableAnnotation ta = null;
if (dd.ActivateView(v.Name))
{
bta = v.InsertBomTable4(
false,
Properties.Settings.Default.BOMLocationX, Properties.Settings.Default.BOMLocationY,
bom_anchor,
bom_type,
v.ReferencedConfiguration,
Properties.Settings.Default.BOMTemplatePath,
false,
bom_numbering,
false);
}
if (bta != null)
{
ta = (TableAnnotation)bta;
if (ta != null)
{
int deptcol = 0;
List <int> rowdpt = new List <int>();
System.Text.RegularExpressions.Regex r = new System.Text.RegularExpressions.Regex(BOMFilter[0]);
for (int i = 0; i < ta.ColumnCount; i++)
{
if (ta.Text[0, i].ToUpper() == @"DEPTID")
{
deptcol = i;
break;
}
}
for (int i = 0; i < ta.RowCount; i++)
{
if (!r.IsMatch(ta.Text[i, deptcol]))
{
rowdpt.Add(i);
}
}
foreach (int item in rowdpt)
{
ta.set_RowHidden(item, true);
}
}
}
}
public void InsertBom()
{
SldWorks swApp = default(SldWorks);
ModelDoc2 swModel = default(ModelDoc2);
SelectionMgr swSelMgr = default(SelectionMgr);
FeatureManager swFeatMgr = default(FeatureManager);
SolidWorks.Interop.sldworks.View swView;
BomTableAnnotation swBomAnn = default(BomTableAnnotation);
BomFeature swBomFeat = default(BomFeature);
long anchorType = 0;
long bomType = 0;
string configuration = null;
string tableTemplate = null;
object visible = null;
DrawingDoc swDraw;
Sheet swSheet = default(Sheet);
//swApp = DirectCast(Marshal.GetActiveObject("SldWorks.Application"), SldWorks)
swApp = (SldWorks)Marshal.GetActiveObject("SldWorks.Application");
swModel = swApp.ActiveDoc;
swFeatMgr = swModel.FeatureManager;
swDraw = (DrawingDoc)swModel;
swSheet = swDraw.GetCurrentSheet();
swModel.Extension.SetUserPreferenceString((int)swUserPreferenceStringValue_e.swDetailingLayer, (int)swUserPreferenceOption_e.swDetailingBillOfMaterial, "");
//ecли FALSE вставляются все конфигурации
swModel.Extension.SetUserPreferenceToggle((int)swUserPreferenceToggle_e.swOneConfigOnlyTopLevelBom, 0, false);
swModel.Extension.SetUserPreferenceToggle((int)swUserPreferenceToggle_e.swBomTableDontAddQTYNextToConfigName, 0, true);
swModel.Extension.SetUserPreferenceToggle((int)swUserPreferenceToggle_e.swDontCopyQTYColumnNameFromTemplate, 0, true);
//swDraw.SetUserPreferenceIntegerValue(swBomTableZeroQuantityDisplay, swZeroQuantityBlank);
//Select View
swModel.ClearSelection2(true);
swView = swDraw.GetCurrentSheet().GetViews()[0];
//Insert BOM Table
anchorType = (int)swBOMConfigurationAnchorType_e.swBOMConfigurationAnchor_TopLeft;
bomType = (int)swBomType_e.swBomType_TopLevelOnly;
swModel.ClearSelection2(true);
configuration = "";
tableTemplate = "C:\\Program Files\\SW-Complex\\Template.sldbomtbt";
swBomAnn = swView.InsertBomTable2(false, -0, -0, (int)anchorType, (int)bomType, configuration, tableTemplate);
swFeatMgr.UpdateFeatureTree();
swBomFeat = swBomAnn.BomFeature;
var Names = swBomFeat.GetConfigurations(false, visible);
visible = true;
swBomFeat.SetConfigurations(true, visible, Names);
}
//第一步,先得到一个视图下所有要重新排序的Note,这里一个视图一组,
//返回HashTable,Note---Point
private Hashtable GetAllNote(ModelDoc2 swModel, SolidWorks.Interop.sldworks.View swView, bool OnlySelected)
{
Hashtable htRet = new Hashtable();
//if (OnlySelected)//只选择选中的
//{
// SelectionMgr SelMgr = (SelectionMgr)swModel.SelectionManager;
// int Count = SelMgr.GetSelectedObjectCount2(0);//选中的个数
// for (int i = 1; i <= Count; i++)
// {
// try
// {
// object o = SelMgr.GetSelectedObject6(i, 0);//0:忽略当前的,-1:忽略全部
// Note not = (Note)o;
// double[] dbArr = (double[])not.GetTextPoint2();
// htRet.Add(not, dbArr);
// }
// catch
// { }
// }
//}
//else//所有的////////////////////////////////////////////////////////////////////////////
//{
// //遍历注释
// Note not = (Note)swView.GetFirstNote();
// while (not != null)
// {
// string txt = not.GetText();
// try
// {
// int a = Convert.ToInt32(txt);
// //如果不是数字,这一步会结束
// Annotation ann = (Annotation)not.GetAnnotation();
// object[] obArr = (object[])ann.GetAttachedEntities2();
// object oc = obArr[0];
// Entity ent = (Entity)oc;
// Component2 comp = (Component2)ent.GetComponent();
// //添加到哈希表
// htRet.Add(not, (double[])not.GetTextPoint2());
// }
// catch
// { }
// not = (Note)not.GetNext();
// }
//}
return(htRet);
}
private void TraverseFile(DirectoryInfo dir, string OldName, string NewName)
{
foreach (FileInfo fi in dir.GetFiles())
{
if (fi.Extension.ToLower() != ".drwdot" && fi.Extension.ToLower() != ".slddrw")
{
continue; //slddrt.
}
string str = fi.FullName;
ModelDoc2 swModel = (ModelDoc2)AllData.iSwApp.OpenDoc(str, (int)swDocumentTypes_e.swDocDRAWING);
if (swModel == null)
{
iErr++; continue;
}
DrawingDoc swDraw = (DrawingDoc)swModel;
if (swDraw == null)
{
iErr++; continue;
}
swDraw.EditTemplate();
SolidWorks.Interop.sldworks.View swView = (SolidWorks.Interop.sldworks.View)swDraw.GetFirstView();
Note swnote = (Note)swView.GetFirstNote();
while (swnote != null)
{
string s = swnote.GetText().ToString();
if (s == OldName)
{
swnote.SetText(NewName);
iOK++;
//这里需要保存
swDraw.EditSheet();
swModel.Save();
}
swnote = (Note)swnote.GetNext();
}
AllData.iSwApp.CloseDoc(swModel.GetTitle());
}
foreach (DirectoryInfo dirsub in dir.GetDirectories())
{
TraverseFile(dirsub, OldName, NewName);
}
}
public int LoadEnable()
{
try
{
int functionReturnValue = 0;
swModel = SwApp.ActiveDoc;
try
{
if (swModel.GetType() != (int)swDocumentTypes_e.swDocDRAWING)
{
functionReturnValue = 0;
}
else
{
_swDraw = (DrawingDoc)swModel;
swSheet = _swDraw.GetCurrentSheet();
swView = _swDraw.GetFirstView();
functionReturnValue = 1;
}
if (swSheet.CustomPropertyView == "По умолчанию" | swSheet.CustomPropertyView == "Default")
{
swView = swView.GetNextView();
// Получаем первый вид
}
swModel = swView.ReferencedDocument;
if (swModel.GetType() != (int)swDocumentTypes_e.swDocASSEMBLY)
{
functionReturnValue = 0;
}
}
catch
{
functionReturnValue = 0;
}
return(functionReturnValue);
}
catch (Exception ex)
{
MessageBox.Show(ex.Message);
throw;
}
}
//得到线的三点,和比例//对一个视图的数据初始化
private void GetViewThreePointAndScale(SolidWorks.Interop.sldworks.View swView)
{
double[] dbViewArr = (double[])swView.GetOutline(); //得到两个点坐标:左下角,右上角
this.dbArrLine[0] = dbViewArr[0]; //左上角
this.dbArrLine[1] = dbViewArr[3];
this.dbArrLine[2] = dbViewArr[2]; //右下角
this.dbArrLine[3] = dbViewArr[1];
this.dbArrLine[4] = (dbViewArr[0] + dbViewArr[2]) / 2; //中心点
this.dbArrLine[5] = (dbViewArr[3] + dbViewArr[1]) / 2;
//X长度//中心点到左上角
double x0 = this.dbArrLine[4] - this.dbArrLine[0];
double y0 = this.dbArrLine[5] - this.dbArrLine[1];
//左上角到中心点的距离,用来计算角度//三边计算角度
this.distAC = Math.Sqrt(x0 * x0 + y0 * y0);
this.scale = x0 / y0;//比例关系
}
private IEnumerable<Feature> HideUnusedComponents(View swView, bool dimOnlyNew)
{
var features = new List<Feature>();
try
{
var comp = swView.RootDrawingComponent;
if (comp.GetChildrenCount() == 0)
{
if (dimOnlyNew)
{
var rootComp = _swAdd.RootModel.IGetActiveConfiguration().IGetRootComponent2();
if (rootComp != null)
{
var outComponents = new LinkedList<Component2>();
if (_swAdd.GetComponents(rootComp, outComponents, true, false))
{
Component2 neededComp = (from outComponent in outComponents
let mod = outComponent.IGetModelDoc()
where mod != null
let name = Path.GetFileNameWithoutExtension(mod.GetPathName())
let drName = comp.Name.Substring(0, comp.Name.LastIndexOf('-'))
where name == drName
select outComponent).FirstOrDefault();
if (neededComp != null)
{
var mod = neededComp.IGetModelDoc();
var fm = mod.FeatureManager;
var oswFeat = (object[])fm.GetFeatures(true);
foreach (var ofeature in oswFeat)
{
var feature = (Feature)ofeature;
string name = feature.GetTypeName2();
if (name == "ICE" || name == "HoleWzd")
{
if (!feature.IsSuppressed())
{
feature.SetSuppression(0);
features.Add(feature);
}
}
}
}
}
}
}
}
else
foreach (var oSwComp in (object[])comp.GetChildren())
{
var swComp = (DrawingComponent) oSwComp;
if (swComp.Visible)
{
var mod = swComp.Component.IGetModelDoc();
if (mod != null)
{
if (dimOnlyNew)
{
var fm = mod.FeatureManager;
var oswFeat = (object[]) fm.GetFeatures(true);
foreach (var ofeature in oswFeat)
{
var feature = (Feature) ofeature;
string name1 = feature.GetTypeName2();
if (name1 == "ICE" || name1 == "HoleWzd")
{
if (!feature.IsSuppressed())
{
feature.SetSuppression(0);
features.Add(feature);
}
}
}
}
if (mod.CustomInfo2["", "Accessories"] == "Yes" || mod.CustomInfo2["","HideOnDraft"]=="Yes")
swComp.Visible = false;
}
}
}
}
catch { }
return features;
}
public SizeForDim(double xLeft, double yUp, double xRight, double yDown, double x, double y, double[] bound, View view)
{
XLeft = xLeft;
YUp = yUp;
XRight = xRight;
YDown = yDown;
X = x;
Y = y;
Bound = bound;
View = view;
}
public Ordinate GetVertexFromBlock(ModelDoc2 swModel, View drView, double vScaleRat, bool up)
{
Ordinate vertex = null;
var objSketchBlockDef = swModel.SketchManager.GetSketchBlockDefinitions();
if (objSketchBlockDef != null)
{
var objSketBlDefs = (object[]) objSketchBlockDef;
foreach (var objSketBlDef in objSketBlDefs)
{
var swSketBlDef = (SketchBlockDefinition) objSketBlDef;
//if ((Path.GetFileNameWithoutExtension(swSketBlDef.FileName) == ("DS" + drView.Name) && up) ||
//(Path.GetFileNameWithoutExtension(swSketBlDef.FileName) == ("DE" + drView.Name) && !up))
{
var objSketBlInsts = (object[]) swSketBlDef.GetInstances();
if (objSketBlInsts != null)
foreach (var objSketBlInst in objSketBlInsts)
{
var swSketBlInst = (SketchBlockInstance) objSketBlInst;
if ((swSketBlInst.Name.Contains("DS" + drView.Name) && up) ||
(swSketBlInst.Name.Contains("DE" + drView.Name) && !up))
{
var pos = (double[]) drView.Position;
var point = swSketBlInst.InstancePosition;
var dims = (double[]) point.ArrayData;
double y = dims[1]/vScaleRat;
double x = dims[0]/vScaleRat;
x = pos[0] + x;
y = pos[1] + y;
vertex = new Ordinate(x, y);
}
}
}
}
}
return vertex;
}
public FoundCoordinate(ISldWorks swApp, Entity ent, Ordinate vertex, double[] dimLineH, double[] dimLineV, BlockPosition side,View swView,bool doThroughHoles)
{
_swApp = swApp;
_swModel = swApp.IActiveDoc2;
_side = side;
_ent = ent;
_vertex = vertex;
_doThroughHoles = doThroughHoles;
_swSelData = _swModel.ISelectionManager.CreateSelectData();
_swView = swView;
_coordinate = FindCoord(dimLineH, dimLineV);
}
public void check()
{
int m = 0;
//swapp = CreateObject("SldWorks.Application")
swapp = (SldWorks)Marshal.GetActiveObject("SldWorks.Application");
swmodel = swapp.ActiveDoc;
// Проверка открытого документа
if (swmodel == null)
{
swapp.SendMsgToUser("Откройте чертеж");
return;
}
//Or swDocumentTypes_e.swDocASSEMBLY
if (swmodel.GetType() != (int)swDocumentTypes_e.swDocDRAWING)
{
swapp.SendMsgToUser("Откройте чертеж");
return;
}
if (string.IsNullOrEmpty(swmodel.GetPathName()))
{
swapp.SendMsgToUser("Сохраните чертеж!");
Close();
return;
}
swDraw = (DrawingDoc)swmodel;
// Получение первого листа
swSheet = swDraw.GetCurrentSheet();
strActiveSheetName = swSheet.GetName();
// Узнаем имя активного листа
vSheetNames = swDraw.GetSheetNames();
ok = swDraw.ActivateSheet(vSheetNames[0]);
swSheet = swDraw.GetCurrentSheet();
swView = swDraw.GetFirstView();
//m = 0
//Debug.Print(swSheet.CustomPropertyView);
if (swSheet.CustomPropertyView == "По умолчанию" | swSheet.CustomPropertyView == "Default")
{
swView = swView.GetNextView();
// Получаем первый вид
}
else
{
while (!(swView == null))
{
if (swView.GetName2() == swSheet.CustomPropertyView)
{
m = 1;
break;
}
swView = swView.GetNextView();
}
if (m == 0)
{
swView = swDraw.GetFirstView();
swView = swView.GetNextView();
swapp.SendMsgToUser("Не удалось определить вид из свойств листа. Ипользуется первый вид.");
}
}
if (swView == null)
{
swapp.SendMsgToUser("Отсутсвует модель!");
// Возвращение активного листа
ok = swDraw.ActivateSheet(strActiveSheetName);
return;
}
if (swView.ReferencedDocument == null)
{
swapp.SendMsgToUser("Отсутсвует модель!");
// Возвращение активного листа
ok = swDraw.ActivateSheet(strActiveSheetName);
return;
}
swmodel = swView.ReferencedDocument;
if (swmodel.GetType() != (int)swDocumentTypes_e.swDocASSEMBLY)
{
swapp.SendMsgToUser("Чертеж должен быть сборочным!");
// Возвращение активного листа
ok = swDraw.ActivateSheet(strActiveSheetName);
return;
}
}
public void SaveDrawingV2()
{
//This callback is for a utility to save an un-saved drawing of a part with a BPA part number into the correct Vault directory with the correct file name.
DrawingDoc swDraw = iSwApp.ActiveDoc;
SolidWorks.Interop.sldworks.View swView = swDraw.IGetFirstView();
swView = swView.GetNextView();
ModelDoc2 swDrawModel = swView.ReferencedDocument;
int errors = 0;
int warnings = 0;
String configName = swView.ReferencedConfiguration;
String drawingNumber = swDrawModel.GetCustomInfoValue(configName, "Drawing Number");
//MessageBox.Show("The drawing number is: " + drawingNumber);
if (drawingNumber == "" || drawingNumber == " ")
{
MessageBox.Show("Please fill out the drawing number field on the model's file data card before proceeding.", "Missing Drawing Number", MessageBoxButtons.OK, MessageBoxIcon.Stop);
return;
}
String modelPath = swDrawModel.GetPathName().ToString();
MessageBox.Show("The model's path is: " + modelPath);
if (modelPath == "" || modelPath == " ")
{
MessageBox.Show("Please save the model before proceeding", "Save the Model", MessageBoxButtons.OK, MessageBoxIcon.Stop);
return;
}
swDrawModel = iSwApp.ActiveDoc;
String swDrawPath = swDrawModel.GetPathName().ToString();
//MessageBox.Show("The drawing path is: " + swDrawPath);
if (swDrawPath != "")
{
MessageBox.Show("The drawing has already been saved as '" + swDrawPath + "' in the Vault.", "Drawng Saved", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
else
{
string[] pathDir = modelPath.Split('\\');
int pathDirLength = pathDir.Length;
string path = pathDir[0] + "\\" + pathDir[1] + "\\" + pathDir[2] + "\\" + pathDir[3] + "\\" + pathDir[4] + "\\";
string dwgPath = path + drawingNumber + ".SLDDRW";
string dialogText = "The drawing path is: \n" + dwgPath + "\nContinue?";
DialogResult result = MessageBox.Show(dialogText, "Save Drawing?", MessageBoxButtons.OKCancel, MessageBoxIcon.Question, MessageBoxDefaultButton.Button1);
if (result == DialogResult.OK)
{
ModelDoc2 Model = SwApp.ActiveDoc;
Boolean Save;
Save = Model.SaveAs4(dwgPath, 0, 1, errors, warnings);
}
}
//ModelDocExtension swModExt = default(ModelDocExtension);
//Return the filepath of the referenced model in the parent view in the active drawing document.
//string swModel = swView.GetReferencedModelName();
}
public void LoadDataGridConfig()
{
try
{
//SelectionMgr swSelMgr;
//Configuration swConfig; ;
string sConfigName;
object[] vConfNameArr;
//swapp = CreateObject("SldWorks.Application")
swapp = (SldWorks)Marshal.GetActiveObject("SldWorks.Application");
swmodel = swapp.ActiveDoc;
swDraw = (DrawingDoc)swmodel;
swSheet = swDraw.GetCurrentSheet();
strActiveSheetName = swSheet.GetName();
vSheetNames = swDraw.GetSheetNames();
swDraw.ActivateSheet(vSheetNames[0]);
swSheet = swDraw.GetCurrentSheet();
swView = swDraw.GetFirstView();
// Получаем параметры модели
if (swSheet.CustomPropertyView == "По умолчанию" | swSheet.CustomPropertyView == "Default")
{
swView = swView.GetNextView();
}
sConfigName = swView.ReferencedConfiguration;
swmodel = swView.ReferencedDocument;
swmodel.GetConfigurationByName(sConfigName);
vConfNameArr = swmodel.GetConfigurationNames();
// Конфигурация
for (var i = 0; i <= vConfNameArr.GetUpperBound(0); i++)
{
DataGridConfig.Rows.Add(ColChB.Selected, vConfNameArr[i]);
}
//Get customProperty from Assy
CustomPropertyManager swCustProp = default(CustomPropertyManager);
string valOut = "";
string Number = "";
string Description = "";
swCustProp = swmodel.Extension.CustomPropertyManager[""];
swCustProp.Get2("Обозначение", out valOut, out Number);
swCustProp.Get2("Наименование", out valOut, out Description);
addinform = new addincheckbox();
try
{
//Fill DataGriad
foreach (string line in System.IO.File.ReadAllLines("C:\\Program Files\\SW-Complex\\doc.txt"))
{
addinform.DGDoc.Rows.Add(addinform.DocChb.Selected, line);
}
}
catch (Exception ex)
{
//Interaction.MsgBox("Отсутствует SW-Complex или Doc.txt");
this.Close();
}
}
catch (Exception ex)
{
MessageBox.Show(ex.Message);
}
}
public void GetXMLfromBOM()
{
swapp = (SldWorks)Marshal.GetActiveObject("SldWorks.Application");
swmodel = swapp.ActiveDoc;
swModelDocExt = swmodel.Extension;
//создаем MemoryStream, в который будем писать XML
var myMemoryStream = new MemoryStream();
//создаем XmlTextWriter, указываем объект – myMemoryStream, в который будем писать XML, и кодировку
try
{
var myXml = new System.Xml.XmlTextWriter("C:\\Program Files\\SW-Complex\\SP-Temp.xml", System.Text.Encoding.UTF8);
swDraw = (DrawingDoc)swmodel;
vSheetNames = swDraw.GetSheetNames();
ok = swDraw.ActivateSheet(vSheetNames[0]);
swView = swDraw.GetFirstView();
// Получаем параметры модели
swView = swView.GetNextView();
swmodel = swView.ReferencedDocument;
//swSelMgr = swDraw.SelectionManager;
myXml.WriteStartDocument();
myXml.Formatting = System.Xml.Formatting.Indented;
//длина отступа
myXml.Indentation = 2;
vConfName = swmodel.GetConfigurationNames();
swapp = new SldWorks();
swmodel = swapp.ActiveDoc;
Feature swFeat = swmodel.FirstFeature();
while ((swFeat != null))
{
if (swFeat.GetTypeName() == "BomFeat")
{
swFeat.Select(true);
swBomFeature = swFeat.GetSpecificFeature2();
}
swFeat = swFeat.GetNextFeature();
}
//////////////////////////////////////////////////////
//
// GetPropertyBomTableFromDrawDoc
//
//////////////////////////////////////////////////////
object vConfigurations = null;
object vVisibility = null;
bool bGetVisible = false;
long lNumRow = 0;
long lNumColumn = 0;
int lRow = 0;
TableAnnotation swTableAnnotation = default(TableAnnotation);
ModelDoc2 swDocument = default(ModelDoc2);
AssemblyDoc swAssembly = default(AssemblyDoc);
int lStartRow = 0;
string strItemNumber = "";
string strPartNumber = "";
string strDescription = "";
var strDocumentName = swBomFeature.GetReferencedModelName();
swDocument = swapp.GetOpenDocumentByName(strDocumentName);
swAssembly = (AssemblyDoc)swDocument;
//swBOMTableAnnotation = swBomFeature.GetTableAnnotations(0)
var swBomTableAnnotation = (BomTableAnnotation)swBomFeature.GetTableAnnotations()[0];
swTableAnnotation = (TableAnnotation)swBomTableAnnotation;
lNumRow = swTableAnnotation.RowCount;
lNumColumn = swTableAnnotation.ColumnCount;
lStartRow = 1;
//If (Not (swTableAnnotation.TitleVisible = False)) Then
if (swTableAnnotation.TitleVisible == false)
{
lStartRow = 2;
}
bGetVisible = false;
vConfigurations = swBomFeature.GetConfigurations(bGetVisible, vVisibility);
//swTableAnnotation = swTableAnnotation;
///////////////////////////////////////////////////////////////////
swSheet = swDraw.GetCurrentSheet();
strActiveSheetName = swSheet.GetName();
vSheetNames = swDraw.GetSheetNames();
ok = swDraw.ActivateSheet(vSheetNames[0]);
swSheet = swDraw.GetCurrentSheet();
swView = swDraw.GetFirstView();
if (swSheet.CustomPropertyView == "По умолчанию" | swSheet.CustomPropertyView == "Default")
{
swView = swView.GetNextView();
}
// get custom property
var valout = ""; //Обозначение
var valout1 = ""; //Наименование
CustomPropertyManager swCustProp = default(CustomPropertyManager);
var resolvedValOut = "";
var resolvedValOut1 = "";
//string resolvedValOut3 = "";
//string resolvedValOut4 = "";
//string resolvedValOut5 = "";
swCustProp = swmodel.Extension.CustomPropertyManager[""];
swCustProp.Get2("Обозначение", out valout, out resolvedValOut);
swCustProp.Get2("Description", out valout1, out resolvedValOut1);
// переменные для колонок
int Jj = 0; // наименование
int aa = 0; // раздел
int oo = 0; // обозначение
int tt = 0; // формат
int yy = 0; //
int uu = 0; // Код материала
int ss = 0; // Примечание
string sRowStr = null; // наименовани
string sRowStr1 = null; // раздел
string sRowStr2 = null; // обозначение
string sRowStr3 = null; // формат
string sRowStr4 = null; // ERP code
string sRowStr5 = null; // Код материала
string sRowStr6 = null; // Примечание
// При выборе электромонтажа
string Complect = "";
if (addinform.ChkElectro1.Checked)
{
Complect = "МЭ";
}
else if (addinform.ChkElectro2.Checked)
{
Complect = "ТБ";
}
////////////////////////////////////////////////////////////
//
// XML
//
////////////////////////////////////////////////////////////
//создаем элементы
myXml.WriteStartElement("xml");
//
myXml.WriteStartElement("Item");
// имя пути основного чертежа
myXml.WriteStartElement("PathName");
//записываем строку
myXml.WriteString(swmodel.GetPathName());
myXml.WriteEndElement();
// Устанавливаем ДОК из формы добавление
myXml.WriteStartElement("doc");
//
myXml.WriteStartElement("Обозначение");
//записываем строку
myXml.WriteString(resolvedValOut + "CБ");
myXml.WriteEndElement();
//
myXml.WriteStartElement("Наименование");
myXml.WriteString("Сборочный чертеж");
myXml.WriteEndElement();
//
myXml.WriteEndElement(); //doc
//dynamic CheckedRows2 = (from Rows in addinform.DGDoc.Rows.Cast<DataGridViewRow>()where Convert.ToBoolean(Rows.Cells(0).Value) == true).ToList;
dynamic CheckedRows2 = (from Rows in addinform.DGDoc.Rows.Cast <DataGridViewRow>() where Convert.ToBoolean(Rows.Cells[0].Value.ToString()) select Rows).ToList();
System.Text.StringBuilder sb = new System.Text.StringBuilder();
foreach (DataGridViewRow row in CheckedRows2)
{
sb.AppendLine(row.Cells[1].Value.ToString());
sb.ToString();
//Оставляем первые две буквы для обозначения разделитель
var literal = row.Cells[1].Value.ToString();
var substring = literal.Substring(0, 2);
var literal2 = row.Cells[1].Value.ToString();
var substring2 = literal2.Substring(5);
myXml.WriteStartElement("doc");
///
myXml.WriteStartElement("Обозначение");
//записываем строку
myXml.WriteString(resolvedValOut + substring);
myXml.WriteEndElement();
///
myXml.WriteStartElement("Наименование");
myXml.WriteString(substring2);
myXml.WriteEndElement();
///
myXml.WriteEndElement();
//doc
}
//<------------- Elec
if (addinform.ChkElectro.Checked == true & addinform.ChkElectro1.Checked == false & addinform.ChkElectro2.Checked == false)
{
myXml.WriteStartElement("Elec");
//Elec
myXml.WriteString("Устанавливают при электромонтаже");
myXml.WriteEndElement();
//Elec
}
//<------------- ChkElectro1
if (addinform.ChkElectro.Checked == true & addinform.ChkElectro1.Checked == true)
{
myXml.WriteStartElement("Elec");
//Elec
myXml.WriteString("Устанавливают по " + resolvedValOut + Complect);
myXml.WriteEndElement();
//Elec
}
//<------------- ChkElectro2
if (addinform.ChkElectro.Checked == true & addinform.ChkElectro2.Checked == true)
{
myXml.WriteStartElement("Elec");
//Elec
myXml.WriteString("Устанавливают по " + resolvedValOut + Complect);
myXml.WriteEndElement();
//Elec
}
//
myXml.WriteStartElement("Обозначение");
//записываем строку
myXml.WriteString(resolvedValOut);
myXml.WriteEndElement();
///
myXml.WriteStartElement("Наименование");
myXml.WriteString(resolvedValOut1);
myXml.WriteEndElement();
//\reference
myXml.WriteStartElement("references");
// ВЫГРУЖАЕМ ВЫБРАННЫЕ КОНФИГУРАЦИИ
dynamic CheckedRows = (from Rows in DataGridConfig.Rows.Cast <DataGridViewRow>() where Convert.ToBoolean(Rows.Cells[0].Value.ToString()) select Rows).ToList();
System.Text.StringBuilder sb2 = new System.Text.StringBuilder();
foreach (DataGridViewRow row in CheckedRows)
{
sb2.AppendLine(row.Cells[1].Value.ToString());
swmodel = swView.ReferencedDocument;
var configuration = swView.ReferencedConfiguration;
var sConfigName = swView.ReferencedConfiguration;
Configuration swConfig = swmodel.GetConfigurationByName(sConfigName);
for (var i = 0; i <= vConfName.GetUpperBound(0); i++)
{
const string ucase = "";
if (vConfName[i] == row.Cells[1].Value.ToString())
{
configuration = vConfName[i];
}
}
swView.ReferencedConfiguration = sConfigName;
myXml.WriteStartElement("config");
myXml.WriteAttributeString("value", row.Cells[1].Value.ToString());
/////////////////////////////////////////////////////////////
//
// PART
//
/////////////////////////////////////////////////////////////
for (lRow = lStartRow; lRow <= (lNumRow - 1); lRow++)
{
if (swBomTableAnnotation.GetComponentsCount2((int)lRow, row.Cells[1].Value.ToString(), out strItemNumber, out strPartNumber) > 0)
{
myXml.WriteStartElement("part");
//PathNameComponent
string strModelPathName = null;
var vModelPathNames = swBomTableAnnotation.GetModelPathNames((int)lRow, out strItemNumber, out strPartNumber);
if (((vModelPathNames != null)))
{
myXml.WriteStartElement("PathNameComponent");
foreach (var vModelPathName_loopVariable in vModelPathNames)
{
var vModelPathName = vModelPathName_loopVariable;
strModelPathName = vModelPathName;
myXml.WriteString(strModelPathName);
}
myXml.WriteEndElement();
}
//'\ Row
myXml.WriteStartElement("Row");
myXml.WriteString(Convert.ToString(lRow - lStartRow + 1));
myXml.WriteEndElement();
vModelPathNames = swBomTableAnnotation.GetModelPathNames((int)lRow, out strItemNumber, out strPartNumber);
//\ ItemNum
myXml.WriteStartElement("ItemNum");
myXml.WriteString(strItemNumber);
myXml.WriteEndElement();
//\ раздел
aa = 3;
/// раздел
sRowStr1 = "";
sRowStr1 = sRowStr1 + swTableAnnotation.Text[lRow, aa];
myXml.WriteStartElement("Раздел");
myXml.WriteString(sRowStr1);
myXml.WriteEndElement();
//\ обозначение
oo = 1;
/// обозначение
sRowStr2 = "";
sRowStr2 = sRowStr2 + swTableAnnotation.Text[lRow, oo];
myXml.WriteStartElement("Обозначение");
myXml.WriteString(sRowStr2);
myXml.WriteEndElement();
//\ наименование
Jj = 2;
/// наименование
sRowStr = "";
sRowStr = sRowStr + swTableAnnotation.Text[lRow, Jj];
myXml.WriteStartElement("Наименование");
myXml.WriteString(sRowStr);
myXml.WriteEndElement();
//\
tt = 4;
/// формат
sRowStr3 = "";
sRowStr3 = sRowStr3 + swTableAnnotation.Text[lRow, tt];
myXml.WriteStartElement("Формат");
myXml.WriteString(sRowStr3);
myXml.WriteEndElement();
//\
yy = 5;
/// ERP code
sRowStr4 = "";
sRowStr4 = sRowStr4 + swTableAnnotation.Text[lRow, yy];
myXml.WriteStartElement("ERP_code");
myXml.WriteString(sRowStr4);
myXml.WriteEndElement();
//\
uu = 6;
/// Код материала
sRowStr5 = "";
sRowStr5 = sRowStr5 + swTableAnnotation.Text[lRow, uu];
myXml.WriteStartElement("Код_материала");
myXml.WriteString(sRowStr5);
myXml.WriteEndElement();
//\
ss = 7;
/// наименование
sRowStr6 = "";
sRowStr6 = sRowStr6 + swTableAnnotation.Text[lRow, ss];
myXml.WriteStartElement("Примечание");
myXml.WriteString(sRowStr6);
myXml.WriteEndElement();
//\
myXml.WriteStartElement("Количество");
//myXml.WriteString(swTableAnnotation.GetComponentsCount2(lRow, strConfiguration, strItemNumber, strPartNumber))
myXml.WriteString(Convert.ToString(swBomTableAnnotation.GetComponentsCount2(lRow, row.Cells[1].Value.ToString(), out strItemNumber, out strPartNumber)));
myXml.WriteEndElement();
myXml.WriteEndElement();
//config
}
}
myXml.WriteEndElement(); //part
}
myXml.WriteEndElement(); //references
//<~~~~~~~~~~~~~~~~~~~~~~~~~~~ Get the Total Number of Rows
Annotation swAnn = default(Annotation);
TableAnnotation swTable = default(TableAnnotation);
long nNumRow = 0;
swmodel = swapp.ActiveDoc;
swView = swDraw.GetFirstView();
swTable = swView.GetFirstTableAnnotation();
swAnn = swTable.GetAnnotation();
nNumRow = swTable.RowCount;
myXml.WriteStartElement("TotalRows");
myXml.WriteString(Convert.ToString(nNumRow));
myXml.WriteEndElement();
//end TotalRows
myXml.WriteEndElement();
//Item
myXml.WriteEndElement();
//элемент XML
//End If
//заносим данные в myMemoryStream
myXml.Flush();
myXml.Close();
}
catch (Exception ex)
{
MessageBox.Show(ex.Message);
throw;
}
}
private bool GetSelectedView(out View swView)
{
bool ret = false;
swView = null;
SelectionMgr swSelMgr = SwModel.ISelectionManager;
if (swSelMgr.GetSelectedObjectCount() == 1)
{
if (swSelMgr.GetSelectedObjectType3(1, 0) == (int)swSelectType_e.swSelDRAWINGVIEWS)
{
swView = (View)swSelMgr.GetSelectedObject6(1, 0);
ret = true;
}
}
return ret;
}
/// <summary>
/// 生成零件号
/// </summary>
private void CreatePartNumber()
{
ModelDoc2 swModel = (ModelDoc2)AllData.iSwApp.ActiveDoc;
if (swModel == null)
{
return;
}
DrawingDoc swDraw = (DrawingDoc)swModel;
if (swDraw == null)
{
return;
}
//序号为零件属性，还是项目号, 还是文字
int iTextContent = -1;
string strText = "";
if (this.rdoTemp1.Checked)
{
iTextContent = (int)swBalloonTextContent_e.swBalloonTextItemNumber;
strText = "";
}
else if (this.rdoTemp2.Checked)
{
iTextContent = (int)swBalloonTextContent_e.swBalloonTextCustomProperties;
strText = Interop.Office.Core.Properties.Settings.Default.CreateNbr_PPtName; //"序号";
}
else if (this.rdoTemp3.Checked)
{
iTextContent = (int)swBalloonTextContent_e.swBalloonTextCustom;
strText = "0";
}
else if (this.rdoTemp4.Checked)
{
iTextContent = (int)swBalloonTextContent_e.swBalloonTextQuantity;
strText = "0";
}
//以正方形分布
int iLayout = (int)swBalloonLayoutType_e.swDetailingBalloonLayout_Square;
//下划线
int iStyle = (int)swBalloonStyle_e.swBS_Underline;
//下划线长度
int iSize = (int)swBalloonFit_e.swBF_Tightest;
//如果用户没有选中一个视图，就选中所有的视图
SolidWorks.Interop.sldworks.View swView = (SolidWorks.Interop.sldworks.View)swDraw.ActiveDrawingView;
if (swView == null)//对所有的视图进行重排序
{
swModel.ClearSelection2(true);
swView = (SolidWorks.Interop.sldworks.View)swDraw.GetFirstView();
while (swView != null)
{
swModel.Extension.SelectByID2(swView.Name, "DRAWINGVIEW", 0, 0, 0, true, 0, null, 0);
swView = (SolidWorks.Interop.sldworks.View)swView.GetNextView();
}
}
//自动添加序号
swDraw.AutoBalloon3(iLayout, true, iStyle, iSize, iTextContent, strText, iTextContent, strText, "");
//Notes = Part.AutoBalloon3(1, True, 10, 2, 1, "", 2, "", "-无-")
//swDraw.AutoBalloon3(iLayout, true, iStyle, -1, iTextContent, "xh", iTextContent, "xh", "");
//swDraw.AutoBalloon3(1, true, 10, 2, 1, "", 2, "", "-无-");
//.AutoBalloon3(1, True, 10, 2, 1, "", 2, "", "-无-")
////SolidWorks2006
//swDraw.AutoBalloon2((int)swBalloonLayoutType_e.swDetailingBalloonLayout_Top, true);
}
private void ProcessHole(View swView, DrawingHole drwhole, string blkname)
{
var mpoint = (MathPoint)(_iSwApp.IGetMathUtility()).CreatePoint(
new[] { drwhole.Cx, drwhole.Cy, drwhole.Cz });
if (blkname != "")
{
SketchBlockDefinition swSbDef = SwModel.SketchManager.MakeSketchBlockFromFile(mpoint, blkname, false, 1,
0);
if (swSbDef == null)
{
var swBDefs = (object[])SwModel.SketchManager.GetSketchBlockDefinitions();
if (swBDefs != null)
{
foreach (var swTestSbDef in
swBDefs.Cast<SketchBlockDefinition>().Where(swTestSbDef => swTestSbDef.FileName == blkname))
{
swSbDef = swTestSbDef;
break;
}
}
}
if (swSbDef != null)
{
var swBInsts = (object[])swSbDef.GetInstances();
if (swBInsts != null)
{
foreach (object t in swBInsts)
{
var swSbInst = (SketchBlockInstance)t;
if (((Feature)swSbInst.GetSketch()).Name == ((Feature)swView.GetSketch()).Name)
{
swSbInst.Scale2 = drwhole.Radius * 2 * swView.ScaleDecimal * 1000;
}
}
}
}
}
drwhole.IsProcessed = true;
}
/// <summary>
/// 如果不是数字冲排序，而是重新指定文字，特别是一些复杂的组合，如【项目数X代号】
/// </summary>
private void SaidiResortOneView(SolidWorks.Interop.sldworks.View swView, ModelDoc2 swModel)
{
//101，$数量×$图号 ，$数量（$属性名）等等各种格式
string strText = this.cmbStartIndex.Text;
//是否需要进行赛迪处理-页码-页数的时候，如果页数=1不显示，否则显示页码
bool bSaidiCheck = false;
char[] carr = new char[] { '(', ')', '×', 'x', 'X', '-', '_', '=', '（', '）', '[', ']', ' ', '/', '"' };
string[] strArr = strText.Split(carr);
//执行完切割后，要去掉引号，因为下面还要加引号
strText = strText.Replace("\"", "");
foreach (string s in strArr)
{
if (s != "$项目数" && s != "$项目号" && s.Length > 1)
{
strText = strText.Replace(s, "$PRPMODEL:\"" + s.Trim(new char[] { '$' }) + "\"");//如"$项目数×$PRPMODEL:\"名称\"";
}
}
bool bXMS = (strText.IndexOf("$项目数") != -1);
bool bXMH = (strText.IndexOf("$项目号") != -1);
int iTextQuantity = (int)swDetailingNoteTextContent_e.swDetailingNoteTextQuantity; //数量
int iTextNumber = (int)swDetailingNoteTextContent_e.swDetailingNoteTextItemNumber; //项目号
int iTextProperty = (int)swDetailingNoteTextContent_e.swDetailingNoteTextCustomProperty; //属性
//遍历注释
Note not = (Note)swView.GetFirstNote();
while (not != null)
{
if (not.IsBomBalloon()) //只有符号这个条件才可以
{
Annotation ann = (Annotation)not.GetAnnotation(); //必须要有Annotation
if (ann == null)
{
goto ABC;
}
object[] obArr = (object[])ann.GetAttachedEntities2();//必须要有Entities
if (obArr == null || obArr.Length == 0)
{
goto ABC;
}
Entity ent = (Entity)obArr[0];
Component2 comp = (Component2)ent.GetComponent();
//看看是否有重复的，一个配置只允许标注一次，如果需要多次标注，只能用不同的配置。
string FullPath = comp.GetPathName() + comp.ReferencedConfiguration;
//先复制一份值
string thisTxt = strText;
//如果有项目数,读取项目数
if (bXMS)
{
//选中这个注释，然后设为项目数
swModel.Extension.SelectByID2(not.GetName() + "@" + swView.Name, "NOTE", 0, 0, 0, true, 0, null, 0);
not.SetBomBalloonText(iTextQuantity, "", iTextQuantity, "");
string txt = not.GetText();
if (txt.Length > 0)
{
thisTxt = thisTxt.Replace("$项目数", txt);
}
}
//如果有项目号，读取项目号
if (bXMH)
{
//选中这个注释，然后设为项目号
swModel.Extension.SelectByID2(not.GetName() + "@" + swView.Name, "NOTE", 0, 0, 0, true, 0, null, 0);
not.SetBomBalloonText(iTextNumber, "", iTextNumber, "");
string txt = not.GetText();
if (txt.Length > 0)
{
thisTxt = thisTxt.Replace("$项目号", txt);
}
}
//如果是赛迪，当页数>1时，加上-页码，否侧不加-页码
//先列出-页数-页码来，然后再去掉-1-1
if (bSaidiCheck)
{
//先设置页数属性链接
not.SetBomBalloonText(iTextProperty, "$PRPMODEL:\"页数\"", iTextProperty, "$PRPMODEL:\"页数\"");
string s = not.GetText();
if (s.Length > 0 && s.Length < 4 && s != "1" && s != "0")
{
thisTxt = thisTxt.Replace("-$PRPMODEL:\"页数\"", "");
}
else
{
thisTxt = thisTxt.Replace("-$PRPMODEL:\"页码\"-$PRPMODEL:\"页数\"", "");
}
}
//最后设置新的文本
not.SetBomBalloonText(iTextProperty, thisTxt, iTextProperty, thisTxt);
}
ABC:
not = (Note)not.GetNext();
}
}
/// <summary>
/// 对于一个视图进行重排序,返回序号已经排到哪了
/// </summary>
private int ReSortOneView(int abc, SolidWorks.Interop.sldworks.View swView, ModelDoc2 swModel)
{
//先得到视图的对角线的三点坐标和比例//初始化视图
this.GetViewThreePointAndScale(swView);
//排序用
ArrayList arSort = new ArrayList();
//保存数据
Hashtable ht = new Hashtable();
//保存数据
Hashtable ht2 = new Hashtable();
//是否有在右上方的//如果没有则为0,否则保在最上方的最大值,如果最大值<0.15,说明虽然有在上方的,但可以忽略,因为离左上角很进.
double dAtTopMaxValue = 0;
//遍历注释
Note not = (Note)swView.GetFirstNote();
while (not != null)
{
if (not.IsBomBalloon()) //只有符号这个条件才可以
{
Annotation ann = (Annotation)not.GetAnnotation(); //必须要有Annotation
if (ann == null)
{
goto ABC;
}
object[] obArr = (object[])ann.GetAttachedEntities2();//必须要有Entities
if (obArr == null || obArr.Length == 0)
{
goto ABC;
}
Entity ent = (Entity)obArr[0];
Component2 comp = (Component2)ent.GetComponent();
//看看是否有重复的，一个配置只允许标注一次，如果需要多次标注，只能用不同的配置。
string FullPath = comp.GetPathName() + comp.ReferencedConfiguration;
if (arCheckRepect.Contains(FullPath))
{
goto ABC;
}
else
{
arCheckRepect.Add(FullPath);
}
//string txt = not.GetText();
double[] dbArr = (double[])not.GetTextPoint2();
//计算角度
double dAngle = GetAngelByNotePoint(dbArr[0], dbArr[1]);
if (CheckUnderOrUpTheLine(dbArr[0], dbArr[1]) == true)//在上方//升序
{
if (dAtTopMaxValue < dAngle)
{
dAtTopMaxValue = dAngle; //保存这个角度//这个角度是上方角度的最大值
}
}
else//下方的//降序
{
dAngle = 15 - dAngle;//dAngle一般不会大于二
}
arSort.Add(dAngle); //排序
ht.Add(dAngle, not); //保存数据
ht2.Add(dAngle, comp); //防止再算一遍
}
ABC:
not = (Note)not.GetNext();
}
///////////////////////////////////////////////////////////////////////////////////////////////
arSort.Sort();//排序
if (dAtTopMaxValue < 0.15)
{
arSort.Reverse(); //如果上方没有,或靠近左上角的地方有一两个(Angle<0.15),下方的也不会按DESC排序
}
/////////////////////////////////////////////////////////////////////////////////////////////////
//序号为项目号，还是零件属性，还是文本
int iTextContent = -1;
string strText = "";
if (this.rdoTemp1.Checked)
{
iTextContent = (int)swDetailingNoteTextContent_e.swDetailingNoteTextItemNumber;
strText = "";
}
else if (this.rdoTemp2.Checked)
{
iTextContent = (int)swDetailingNoteTextContent_e.swDetailingNoteTextCustomProperty;
strText = "$PRPMODEL:\"序号\"";
}
else if (this.rdoTemp3.Checked)
{
iTextContent = (int)swDetailingNoteTextContent_e.swDetailingNoteTextCustom;
strText = "";
}
else if (this.rdoTemp4.Checked)
{
iTextContent = (int)swBalloonTextContent_e.swBalloonTextQuantity;
strText = "0";
}
//开始修改
for (int i = 0; i < arSort.Count; i++)
{
Note notsub = (Note)ht[arSort[i]];
Component2 comp = (Component2)ht2[arSort[i]];
//选中这个注释
swModel.Extension.SelectByID2(notsub.GetName() + "@" + swView.Name, "NOTE", 0, 0, 0, true, 0, null, 0);
if (this.rdoTemp2.Checked)
{
this.swm.SetAtrByCompAndAtrName(comp, "序号", abc);//设置属性,并保存到零件
}
else
{
strText = abc.ToString();//序号
}
//notsub.PropertyLinkedText = "$PRPMODEL:\"序号\"";//这样可能也可以
notsub.SetBomBalloonText(iTextContent, strText, iTextContent, strText);
//////////////////////////////////////////////////////////////////////
//检查看看是否正确,如果不正确,再设置，这里没起到任何作用
string txt = notsub.GetText();
if (txt != abc.ToString())
{
notsub.SetText(abc.ToString());
}
///////////////////////////////////////////////////////////////////////
abc++;
}
return(abc);
}
/// <summary>
/// 如果有一个视图为选中状态,则对这个视图进行重排序,
/// 否则,对一个图纸下的所有视图进行重排序
/// </summary>
private void ReSortAllView()
{
this.arCheckRepect.Clear();
if (this.rdoTemp1.Checked)
{
if (StringOperate.Alert("序号为项目号时，无法重排序，要继续吗？", "提示", MessageBoxButtons.YesNo, MessageBoxIcon.Question) != DialogResult.Yes)
{
return;
}
}
ModelDoc2 swModel = (ModelDoc2)AllData.iSwApp.ActiveDoc;
if (swModel == null)
{
return;
}
DrawingDoc swDraw = (DrawingDoc)swModel;
SelectionMgr SelMgr = (SelectionMgr)swModel.SelectionManager;
swModel.ClearSelection2(true);
//101，$数量×"序号"，$数量×"属性名"
string strTxt = this.cmbStartIndex.Text;
int abc = 1;
bool bText = false;
try
{
abc = Convert.ToInt16(this.cmbStartIndex.Text);//序号从一开始
}
catch
{
bText = true;
}
SolidWorks.Interop.sldworks.View swView = (SolidWorks.Interop.sldworks.View)swDraw.ActiveDrawingView;
if (swView == null)//对所有的视图进行重排序
{
swView = (SolidWorks.Interop.sldworks.View)swDraw.GetFirstView();
//遍历视图
while (swView != null)
{
swDraw.ActivateView(swView.Name);
if (bText)
{
SaidiResortOneView(swView, swModel);//对这个视图进行排序
}
else
{
abc = ReSortOneView(abc, swView, swModel);//对这个视图进行排序
}
//转到下一个视图
swView = (SolidWorks.Interop.sldworks.View)swView.GetNextView();
}
}
else//只对当前视图进行重排序
{
if (bText)
{
SaidiResortOneView(swView, swModel);//对这个视图进行排序
}
else
{
ReSortOneView(abc, swView, swModel);
}
}
//重建,以更新明细表
swModel.EditRebuild3();
this.arCheckRepect.Clear();
}
