public void Copy(Source_QueryParms from)
{
// Val parm
this.TagGroupSelected = from.TagGroupSelected;
this.TagGroupSession = from.TagGroupSession;
this.TagGroupTarget = from.TagGroupTarget;
if (from.SingulationAlgorithm == SingulationAlgorithm.FIXEDQ)
{
this.nativeSingulationParms = new rfid.Structures.FixedQParms( );
this.sourceParameters = new Source_SingulationParametersFixedQ
(
(rfid.Structures.FixedQParms) this.nativeSingulationParms
);
(( Source_SingulationParametersFixedQ )this.sourceParameters).Copy
(
( Source_SingulationParametersFixedQ )from.SingulationAlgorithmParameters
);
}
else if (from.SingulationAlgorithm == SingulationAlgorithm.DYNAMICQ)
{
this.nativeSingulationParms = new rfid.Structures.DynamicQParms( );
this.sourceParameters = new Source_SingulationParametersDynamicQ
(
(rfid.Structures.DynamicQParms) this.nativeSingulationParms
);
(( Source_SingulationParametersDynamicQ )this.sourceParameters).Copy
(
( Source_SingulationParametersDynamicQ )from.SingulationAlgorithmParameters
);
}
else
{
Console.WriteLine("ERR : Algorithm.Copy( Source_QueryParms from )");
}
}
// Grabs the values on board for the specified algorithm but leaves
// board in original state - warning - MANY POINTS OF FAILURE - you
// have been warned.
public rfid.Constants.Result loadForAlgorithm(
rfid.Linkage transport,
UInt32 readerHandle,
rfid.Constants.SingulationAlgorithm algorithm
)
{
// Need to do lower level register manipulation for this one...
UInt32 reg_0x0901 = 0;
Result result = Result.OK;
try
{
// Set the algo on the board ~ maintaining all other fields
result = transport.API_ConfigReadRegister
(
( UInt16 ) 0x0901, ref reg_0x0901
);
if ( rfid.Constants.Result.OK != result )
{
throw new Exception( result.ToString( ) );
}
result = transport.API_ConfigWriteRegister
(
( UInt16 ) 0x0901, ( reg_0x0901 & 0xFFFFFFC0 ) | ( UInt32 ) algorithm
);
if ( rfid.Constants.Result.OK != result )
{
throw new Exception( result.ToString( ) );
}
// Set for the algo register bank on the board
result = transport.API_ConfigWriteRegister
(
( UInt16 ) 0x0902, ( UInt32 ) algorithm
);
if ( rfid.Constants.Result.OK != result )
{
throw new Exception( result.ToString( ) );
}
result = this.load( transport, readerHandle );
if ( rfid.Constants.Result.OK != result )
{
throw new Exception( result.ToString( ) );
}
// Restore algo bank reg to original value
result = transport.API_ConfigWriteRegister
(
( UInt16 ) 0x0901, reg_0x0901
);
if ( rfid.Constants.Result.OK != result )
{
throw new Exception( result.ToString( ) );
}
}
catch ( Exception )
{
// NOP - let fall thru to result check & msg display
}
// If we did ok, our source for the underlying singulation
// parameters must also now be changed here AND grabbed at
// the gui level ...
if ( Result.OK == result )
{
switch( algorithm )
{
case SingulationAlgorithm.FIXEDQ:
{
sourceParameters = new Source_SingulationParametersFixedQ
(
( rfid.Structures.FixedQParms ) this.nativeSingulationParms
);
}
break;
case SingulationAlgorithm.DYNAMICQ:
{
sourceParameters = new Source_SingulationParametersDynamicQ
(
( rfid.Structures.DynamicQParms ) this.nativeSingulationParms
);
}
break;
default:
Console.WriteLine( "ERR : Algorithm.Copy( Source_QueryParms from )" );
break;
};
}
return result;
}
// This load for basic grab current fields on board
public rfid.Constants.Result load(
rfid.Linkage transport,
UInt32 readerHandle
)
{
Result result;
result = transport.API_l8K6CGetQueryTagGroup( ref this.nativeTagGroup);
if (Result.OK != result)
{
return result;
}
SingulationAlgorithm algorithm = SingulationAlgorithm.UNKNOWN;
result = transport.API_l8K6CGetCurrentSingulationAlgorithm(ref algorithm);
if (Result.OK != result)
{
return result;
}
switch (algorithm)
{
case SingulationAlgorithm.FIXEDQ:
{
this.nativeSingulationParms = new FixedQParms();
}
break;
case SingulationAlgorithm.DYNAMICQ:
{
this.nativeSingulationParms = new DynamicQParms();
}
break;
//case SingulationAlgorithm.DYNAMICQ_ADJUST:
// {
// }
// break;
//case SingulationAlgorithm.DYNAMICQ_THRESHOLD:
// {
// }
// break;
default:
{
return Result.DRIVER_MISMATCH;
}
}
result = transport.API_l8K6CGetSingulationAlgorithmParameters
(
algorithm,
ref this.nativeSingulationParms
);
if ( Result.OK == result )
{
Type algoType = this.nativeSingulationParms.GetType();
if (algoType == typeof(rfid.Structures.FixedQParms))
{
this.sourceParameters = new Source_SingulationParametersFixedQ
(
( rfid.Structures.FixedQParms ) this.nativeSingulationParms
);
}
else if (algoType == typeof(rfid.Structures.DynamicQParms))
{
this.sourceParameters = new Source_SingulationParametersDynamicQ
(
( rfid.Structures.DynamicQParms ) this.nativeSingulationParms
);
}
else
{
System.Windows.Forms.MessageBox.Show( "ERR : Algorithm.Copy( Source_QueryParms from )" );
Console.WriteLine( "ERR : Algorithm.Copy( Source_QueryParms from )" );
}
}
return result;
}
public void Copy( Source_QueryParms from )
{
// Val parm
this.TagGroupSelected = from.TagGroupSelected;
this.TagGroupSession = from.TagGroupSession;
this.TagGroupTarget = from.TagGroupTarget;
if (from.SingulationAlgorithm == SingulationAlgorithm.FIXEDQ)
{
this.nativeSingulationParms = new rfid.Structures.FixedQParms( );
this.sourceParameters = new Source_SingulationParametersFixedQ
(
( rfid.Structures.FixedQParms ) this.nativeSingulationParms
);
( ( Source_SingulationParametersFixedQ ) this.sourceParameters ).Copy
(
( Source_SingulationParametersFixedQ ) from.SingulationAlgorithmParameters
);
}
else if (from.SingulationAlgorithm == SingulationAlgorithm.DYNAMICQ)
{
this.nativeSingulationParms = new rfid.Structures.DynamicQParms( );
this.sourceParameters = new Source_SingulationParametersDynamicQ
(
( rfid.Structures.DynamicQParms ) this.nativeSingulationParms
);
( ( Source_SingulationParametersDynamicQ ) this.sourceParameters ).Copy
(
( Source_SingulationParametersDynamicQ ) from.SingulationAlgorithmParameters
);
}
else
{
Console.WriteLine( "ERR : Algorithm.Copy( Source_QueryParms from )" );
}
}
// Grabs the values on board for the specified algorithm but leaves
// board in original state - warning - MANY POINTS OF FAILURE - you
// have been warned.
public rfid.Constants.Result loadForAlgorithm
(
rfid.Linkage transport,
UInt32 readerHandle,
rfid.Constants.SingulationAlgorithm algorithm
)
{
// Need to do lower level register manipulation for this one...
UInt32 reg_0x0901 = 0;
Result result = Result.OK;
try
{
// Set the algo on the board ~ maintaining all other fields
result = transport.API_ConfigReadRegister
(
( UInt16 )0x0901, ref reg_0x0901
);
if (rfid.Constants.Result.OK != result)
{
throw new Exception(result.ToString( ));
}
result = transport.API_ConfigWriteRegister
(
( UInt16 )0x0901, (reg_0x0901 & 0xFFFFFFC0) | ( UInt32 )algorithm
);
if (rfid.Constants.Result.OK != result)
{
throw new Exception(result.ToString( ));
}
// Set for the algo register bank on the board
result = transport.API_ConfigWriteRegister
(
( UInt16 )0x0902, ( UInt32 )algorithm
);
if (rfid.Constants.Result.OK != result)
{
throw new Exception(result.ToString( ));
}
result = this.load(transport, readerHandle);
if (rfid.Constants.Result.OK != result)
{
throw new Exception(result.ToString( ));
}
// Restore algo bank reg to original value
result = transport.API_ConfigWriteRegister
(
( UInt16 )0x0901, reg_0x0901
);
if (rfid.Constants.Result.OK != result)
{
throw new Exception(result.ToString( ));
}
}
catch (Exception)
{
// NOP - let fall thru to result check & msg display
}
// If we did ok, our source for the underlying singulation
// parameters must also now be changed here AND grabbed at
// the gui level ...
if (Result.OK == result)
{
switch (algorithm)
{
case SingulationAlgorithm.FIXEDQ:
{
sourceParameters = new Source_SingulationParametersFixedQ
(
(rfid.Structures.FixedQParms) this.nativeSingulationParms
);
}
break;
case SingulationAlgorithm.DYNAMICQ:
{
sourceParameters = new Source_SingulationParametersDynamicQ
(
(rfid.Structures.DynamicQParms) this.nativeSingulationParms
);
}
break;
default:
Console.WriteLine("ERR : Algorithm.Copy( Source_QueryParms from )");
break;
}
;
}
return(result);
}
// This load for basic grab current fields on board
public rfid.Constants.Result load
(
rfid.Linkage transport,
UInt32 readerHandle
)
{
Result result;
result = transport.API_l8K6CGetQueryTagGroup(ref this.nativeTagGroup);
if (Result.OK != result)
{
return(result);
}
SingulationAlgorithm algorithm = SingulationAlgorithm.UNKNOWN;
result = transport.API_l8K6CGetCurrentSingulationAlgorithm(ref algorithm);
if (Result.OK != result)
{
return(result);
}
switch (algorithm)
{
case SingulationAlgorithm.FIXEDQ:
{
this.nativeSingulationParms = new FixedQParms();
}
break;
case SingulationAlgorithm.DYNAMICQ:
{
this.nativeSingulationParms = new DynamicQParms();
}
break;
//case SingulationAlgorithm.DYNAMICQ_ADJUST:
// {
// }
// break;
//case SingulationAlgorithm.DYNAMICQ_THRESHOLD:
// {
// }
// break;
default:
{
return(Result.DRIVER_MISMATCH);
}
}
result = transport.API_l8K6CGetSingulationAlgorithmParameters
(
algorithm,
ref this.nativeSingulationParms
);
if (Result.OK == result)
{
Type algoType = this.nativeSingulationParms.GetType();
if (algoType == typeof(rfid.Structures.FixedQParms))
{
this.sourceParameters = new Source_SingulationParametersFixedQ
(
(rfid.Structures.FixedQParms) this.nativeSingulationParms
);
}
else if (algoType == typeof(rfid.Structures.DynamicQParms))
{
this.sourceParameters = new Source_SingulationParametersDynamicQ
(
(rfid.Structures.DynamicQParms) this.nativeSingulationParms
);
}
else
{
System.Windows.Forms.MessageBox.Show("ERR : Algorithm.Copy( Source_QueryParms from )");
Console.WriteLine("ERR : Algorithm.Copy( Source_QueryParms from )");
}
}
return(result);
}