public async Task CreateInMemoryImport() {
if (_unloadCancellationToken.IsCancellationRequested) {
return;
}
using (var access = await _projectLockService.WriteLockAsync(_unloadCancellationToken)) {
// A bit odd but we have to "check it out" prior to creating it to avoid some of the validations in chk CPS
await access.CheckoutAsync(_inMemoryImportFullPath);
// Now either open or create the in-memory file. Normally Create will happen, but in
// a scenario where your project had previously failed to load for some reason, need to TryOpen
// to avoid a new reason for a project load failure
_inMemoryImport = ProjectRootElement.TryOpen(_inMemoryImportFullPath, access.ProjectCollection);
if (_inMemoryImport != null) {
// The file already exists. Scrape it out so we don’t add duplicate items.
_inMemoryImport.RemoveAllChildren();
} else {
// The project didn’t already exist, so create it, and then mark the evaluated project dirty
// so that MSBuild will notice. This step isn’t necessary if the project was already in memory.
_inMemoryImport = CreateEmptyMsBuildProject(_inMemoryImportFullPath, access.ProjectCollection);
// Note that we actually need to mark every project evaluation dirty that is already loaded.
await ReevaluateLoadedConfiguredProjects(_unloadCancellationToken, access);
}
_filesItemGroup = _inMemoryImport.AddItemGroup();
_directoriesItemGroup = _inMemoryImport.AddItemGroup();
_temporaryAddedItemGroup = _inMemoryImport.AddItemGroup();
}
}
internal static void generateFiles(Project p, PGOptions opts1, ProjectItemGroupElement pige)
{
Dictionary<string, string> tmp = new Dictionary<string, string>();
WinDataProvider wdp = new WinDataProvider(WIN_NAME, opts1.projectNamespace, opts1.xamlType == XamlWindowType.RegularWindow);
AppDataProvider apd = new AppDataProvider(wdp.fileName, opts1.projectNamespace);
HomeDataProvider hdp = null;
string tmp2;
XamlFileGenerator.generateFile(apd, opts1);
XamlFileGenerator.generateFile(wdp, opts1);
if (opts1.xamlType == XamlWindowType.NavigationWindow) {
hdp = new HomeDataProvider(wdp.homePage, opts1.projectNamespace);
XamlFileGenerator.generateFile(hdp, opts1);
generatePageAndModel(pige, hdp);
}
if (!string.IsNullOrEmpty(tmp2 = wdp.viewModelName) && File.Exists(tmp2)) {
generateCompile(pige, tmp2);
}
generateApp(pige, apd);
generatePage(pige, wdp);
if (opts1.xamlPages.Count > 0) {
GeneralPage gp;
foreach (string aPageName in opts1.xamlPages) {
gp = new GeneralPage(aPageName, opts1.projectNamespace);
XamlFileGenerator.generateFile(gp, opts1);
generatePageAndModel(pige, gp);
}
}
}
static void generateDependentCompile(ProjectItemGroupElement pige, string fname, string depName)
{
IDictionary<string, string> tmp = new Dictionary<string, string>();
if (!string.IsNullOrEmpty(depName))
tmp.Add("DependentUpon", Path.GetFileName(depName));
tmp.Add("SubType", "Code");
generateCompile(pige, fname, tmp);
}
internal ProjectItemGroupTaskInstance (ProjectItemGroupElement xml)
{
condition = xml.Condition;
condition_location = xml.ConditionLocation;
//this.FullPath = fullPath;
location = xml.Location;
Items = xml.Items.Select (item => new ProjectItemGroupTaskItemInstance (item)).ToArray ();
}
void GenerateCompileIncludes (ProjectItemGroupElement itemGroup)
{
foreach (var include in new[] { "Test.cs", "Test2.cs", "Test3.cs" }) {
itemGroup.AddItem ("Compile", ProjectCollection.Escape (include),
new[] { new KeyValuePair<string, string> ("SubType", "Code") });
}
foreach (var resource in new[] { "Test.resx", "Test2.resx", "Test3.resx" }) {
itemGroup.AddItem ("EmbeddedResource", ProjectCollection.Escape (resource),
new[] { new KeyValuePair<string, string> ("LogicalName", "Name.Space.Test") });
}
}
internal static void generateMainFiles(Project p, PGOptions opts, ProjectItemGroupElement pige2)
{
switch (opts.projectType) {
case ProjectType.WindowsForm: generateForms(pige2, opts); break;
case ProjectType.ConsoleApp: generateMain(pige2, opts); break;
case ProjectType.ClassLibrary: generateLib(pige2, opts); break;
case ProjectType.XamlApp: generateXaml(pige2, opts); break;
default:
throw new InvalidOperationException("unhandled " + opts.projectType.GetType().Name + ": " + opts.projectType);
}
}
void GenerateReferences (ProjectItemGroupElement itemGroup)
{
foreach (var reference in new[] { "Test.dll", "Test2.dll", "Test3.dll" }) {
var name = Path.GetFileNameWithoutExtension (reference);
itemGroup.AddItem ("Reference", name, new[] {
new KeyValuePair<string, string> ("Name", name),
new KeyValuePair<string, string> ("HintPath",
ProjectCollection.Escape (reference)) });
}
foreach (var reference in new[] { "mscorlib", "System", "System.Xml" }) {
itemGroup.AddItem ("Reference", reference);
}
}
static void generateApp(ProjectItemGroupElement pige, IXamlFileGenerationData ixfgd)
{
#if true
generateNode(pige, ixfgd.xamlName, "Generator", "ApplicationDefinition");
#else
IDictionary<string, string> tmp = new Dictionary<string, string>();
tmp.Add("Generator", "MSBuild:Compile");
tmp.Add("SubType", "Generator");
pige.AddItem("ApplicationDefinition", ixfgd.xamlName, tmp);
Debug.Print("Adding: " + ixfgd.xamlName);
#endif
generateDependentCompile(pige, ixfgd.codeBehindName, ixfgd.xamlName);
}
static void addProjCfg(ProjectItemGroupElement v1, string cfg, string plat)
{
ProjectItemElement pie = v1.AddItem("ProjectConfiguration", cfg + "|" + plat);
pie.AddMetadata("Configuration", cfg);
pie.AddMetadata("Platform", plat);
}
static void fakeC(ProjectItemGroupElement pige)
{
pige.AddItem("ClCompile", "fake.c");
}
/// <summary>
/// Initialize a parented ProjectItemElement instance
/// </summary>
internal ProjectItemElement(XmlElementWithLocation xmlElement, ProjectItemGroupElement parent, ProjectRootElement containingProject)
: base(xmlElement, parent, containingProject)
{
ErrorUtilities.VerifyThrowArgumentNull(parent, nameof(parent));
}
internal ProjectItemElement LookupItem(ProjectItemGroupElement parent, string name, string condition = null) {
ProjectItemElement property = null;
var label = Pivots.GetExpressionLabel(condition);
name = name.Replace(".", "_");
if(string.IsNullOrEmpty(condition)) {
property = parent.Items.FirstOrDefault(each => name == each.ItemType && string.IsNullOrEmpty(each.Condition));
if(property != null) {
return property;
}
return parent.AddItem(name, "UNUSED");
}
var conditionExpression = Pivots.GetMSBuildCondition(Name, condition);
property = parent.Items.FirstOrDefault(each => name == each.ItemType && each.Condition == conditionExpression);
if(property != null) {
return property;
}
property = parent.AddItem(name, "UNUSED");
property.Label = label;
property.Condition = conditionExpression;
return property;
}
private void RemoveItem(ProjectItemGroupElement parent, Dictionary<string, ProjectItemElement> items, string path) {
ProjectItemElement item;
if (!items.TryGetValue(path, out item)) {
return;
}
parent.RemoveChild(item);
items.Remove(path);
}
/// <summary>
/// Processes the <Service> element, and add an appropriate reference
/// items to the startupServicesItemGroup.
/// </summary>
/// <owner>RGoel</owner>
private void ProcessServiceElement
(
XmlElementWithLocation serviceElement,
ProjectItemGroupElement startupServicesItemGroup
)
{
// Make sure this is the <Service> element.
error.VerifyThrow((serviceElement != null) &&
(serviceElement.Name == VSProjectElements.service),
"Expected <Service> element.");
// Make sure the caller has already created an ProjectItemGroupElement for us to
// put the new items in.
error.VerifyThrow(startupServicesItemGroup != null, "Received null ProjectItemGroupElement");
// Get the required "ID" attribute.
string id = serviceElement.GetAttribute(VSProjectAttributes.id);
ProjectErrorUtilities.VerifyThrowInvalidProject((id != null) && (id.Length > 0), serviceElement.Location,
"MissingAttribute", VSProjectAttributes.id, VSProjectElements.service);
// Remove the "ID" attribute, so it doesn't show up in our loop later.
serviceElement.RemoveAttribute(VSProjectAttributes.id);
// The <Service> element gets converted to XMake as an item of type "Service".
// The "ID" attribute becomes the "Include" for the new item. For
// example,
// -----------------------------------------------------------------------
// Everett format:
// ===============
// <Service ID = "ABCD1234-78F4-4F98-AFD6-720DA6E648A2" />
// -----------------------------------------------------------------------
// XMake format:
// =============
// <Service Include="ABCD1234-78F4-4F98-AFD6-720DA6E648A2" />
// -----------------------------------------------------------------------
startupServicesItemGroup.AddItem(XMakeProjectStrings.service, ProjectCollection.Escape(id));
// There should be no other attributes on the <Service> element (besides
// "ID" which we already took care of). But loop through them
// anyway, so we can emit a useful error message.
foreach (XmlAttributeWithLocation serviceAttribute in serviceElement.Attributes)
{
ProjectErrorUtilities.VerifyThrowInvalidProject(false, serviceAttribute.Location, "UnrecognizedAttribute",
serviceAttribute.Name, VSProjectElements.service);
}
// There should be no children of the <Service> element.
ProjectXmlUtilities.VerifyThrowProjectNoChildElements(serviceElement);
}
/// <summary>
/// Parse a ProjectItemElement
/// </summary>
private ProjectItemElement ParseProjectItemElement(XmlElementWithLocation element, ProjectItemGroupElement parent)
{
ProjectXmlUtilities.VerifyThrowProjectAttributes(element, s_validAttributesOnItem);
bool belowTarget = parent.Parent is ProjectTargetElement;
string itemType = element.Name;
string include = element.GetAttribute(XMakeAttributes.include);
string exclude = element.GetAttribute(XMakeAttributes.exclude);
string remove = element.GetAttribute(XMakeAttributes.remove);
string update = element.GetAttribute(XMakeAttributes.update);
var exclusiveItemOperation = "";
int exclusiveAttributeCount = 0;
if (element.HasAttribute(XMakeAttributes.include))
{
exclusiveAttributeCount++;
exclusiveItemOperation = XMakeAttributes.include;
}
if (element.HasAttribute(XMakeAttributes.remove))
{
exclusiveAttributeCount++;
exclusiveItemOperation = XMakeAttributes.remove;
}
if (element.HasAttribute(XMakeAttributes.update))
{
exclusiveAttributeCount++;
exclusiveItemOperation = XMakeAttributes.update;
}
// At most one of the include, remove, or update attributes may be specified
if (exclusiveAttributeCount > 1)
{
XmlAttributeWithLocation errorAttribute = remove.Length > 0 ? (XmlAttributeWithLocation)element.Attributes[XMakeAttributes.remove] : (XmlAttributeWithLocation)element.Attributes[XMakeAttributes.update];
ProjectErrorUtilities.ThrowInvalidProject(errorAttribute.Location, "InvalidAttributeExclusive");
}
// Include, remove, or update must be present unless inside a target
ProjectErrorUtilities.VerifyThrowInvalidProject(exclusiveAttributeCount == 1 || belowTarget, element.Location, "MissingRequiredAttribute", exclusiveItemOperation, itemType);
// Exclude must be missing, unless Include exists
ProjectXmlUtilities.VerifyThrowProjectInvalidAttribute(exclude.Length == 0 || include.Length > 0, (XmlAttributeWithLocation)element.Attributes[XMakeAttributes.exclude]);
// If we have an Include attribute at all, it must have non-zero length
ProjectErrorUtilities.VerifyThrowInvalidProject(include.Length > 0 || element.Attributes[XMakeAttributes.include] == null, element.Location, "MissingRequiredAttribute", XMakeAttributes.include, itemType);
// If we have a Remove attribute at all, it must have non-zero length
ProjectErrorUtilities.VerifyThrowInvalidProject(remove.Length > 0 || element.Attributes[XMakeAttributes.remove] == null, element.Location, "MissingRequiredAttribute", XMakeAttributes.remove, itemType);
// If we have an Update attribute at all, it must have non-zero length
ProjectErrorUtilities.VerifyThrowInvalidProject(update.Length > 0 || element.Attributes[XMakeAttributes.update] == null, element.Location, "MissingRequiredAttribute", XMakeAttributes.update, itemType);
XmlUtilities.VerifyThrowProjectValidElementName(element);
ProjectErrorUtilities.VerifyThrowInvalidProject(XMakeElements.IllegalItemPropertyNames[itemType] == null, element.Location, "CannotModifyReservedItem", itemType);
ProjectItemElement item = new ProjectItemElement(element, parent, _project);
foreach (XmlElementWithLocation childElement in ProjectXmlUtilities.GetVerifyThrowProjectChildElements(element))
{
ProjectMetadataElement metadatum = ParseProjectMetadataElement(childElement, item);
item.AppendParentedChildNoChecks(metadatum);
}
return item;
}
private Task RemoveItems(ProjectItemGroupElement parent, Dictionary<string, ProjectItemElement> items, string directoryName, ProjectWriteLockReleaser access) {
return RemoveItems(parent, items, items.Keys.Where(f => f.StartsWithIgnoreCase(directoryName)).ToList(), access);
}
/// <summary>
/// Given an element corresponding to a .NET Assembly reference, create the appropriate element in the new project
/// </summary>
/// <param name="referenceElement"></param>
/// <param name="referencesItemGroup"></param>
/// <param name="referenceName"></param>
/// <returns></returns>
private ProjectItemElement ConvertAssemblyReference(XmlElementWithLocation referenceElement, ProjectItemGroupElement referencesItemGroup, string referenceName)
{
ProjectItemElement newReferenceItem;
// This is a regular .NET assembly reference.
// This gets added as a new XMake item of type "Reference". The "Include"
// attribute is the assembly name, and all the other attributes remain
// the same. For example,
// -----------------------------------------------------------------------
// Everett format:
// ===============
// <Reference
// Name = "System.Xml"
// AssemblyName = "System.Xml"
// HintPath = "..\..\binaries\x86chk\bin\i386\System.Xml.dll"
// />
// -----------------------------------------------------------------------
// XMake format:
// =============
// <Reference Include="System.Xml">
// <Name>System.Xml</Name>
// <HintPath>..\..\binaries\x86chk\bin\i386\System.Xml.dll</HintPath>
// </Reference>
// -----------------------------------------------------------------------
// Get the "AssemblyName" attribute. If not found, just use the value from the
// "Name" attribute. This is what the project loading code does in VS.
string assemblyName = referenceElement.GetAttribute(VSProjectAttributes.assemblyName);
if ((assemblyName == null) || (assemblyName.Length == 0))
{
assemblyName = referenceName;
}
else
{
// Remove the "AssemblyName" attribute so we don't add it again at
// the end.
referenceElement.RemoveAttribute(VSProjectAttributes.assemblyName);
}
// MyType should only be added when System.Windows.Forms is present. If this
// reference is seen, then set a flag so we can later add MyType.
if (0 == String.Compare("System.Windows.Forms", assemblyName, StringComparison.OrdinalIgnoreCase))
{
hasWindowsFormsReference = true;
}
// Remove hint paths that we think are to RTM or Everett framework assemblies
string hintPath = referenceElement.GetAttribute(VSProjectAttributes.hintPath);
if (hintPath != null)
{
hintPath = hintPath.ToUpper(CultureInfo.InvariantCulture);
if (hintPath.IndexOf(LegacyFrameworkPaths.RTMFrameworkPath, StringComparison.Ordinal) != -1 ||
hintPath.IndexOf(LegacyFrameworkPaths.EverettFrameworkPath, StringComparison.Ordinal) != -1 ||
hintPath.IndexOf(LegacyFrameworkPaths.JSharpRTMFrameworkPath, StringComparison.Ordinal) != -1)
{
referenceElement.RemoveAttribute(VSProjectAttributes.hintPath);
}
}
newReferenceItem = referencesItemGroup.AddItem(XMakeProjectStrings.reference, ProjectCollection.Escape(assemblyName));
return newReferenceItem;
}
/// <summary>
/// Parse a ProjectItemElement
/// </summary>
private ProjectItemElement ParseProjectItemElement(XmlElementWithLocation element, ProjectItemGroupElement parent)
{
ProjectXmlUtilities.VerifyThrowProjectAttributes(element, s_validAttributesOnItem);
bool belowTarget = parent.Parent is ProjectTargetElement;
string itemType = element.Name;
string include = element.GetAttribute(XMakeAttributes.include);
string exclude = element.GetAttribute(XMakeAttributes.exclude);
string remove = element.GetAttribute(XMakeAttributes.remove);
// Remove must be missing, unless inside a target and Include is missing
ProjectXmlUtilities.VerifyThrowProjectInvalidAttribute((remove.Length == 0 || (belowTarget && include.Length == 0)), (XmlAttributeWithLocation)element.Attributes[XMakeAttributes.remove]);
// Include must be present, unless inside a target
ProjectErrorUtilities.VerifyThrowInvalidProject(include.Length > 0 || belowTarget, element.Location, "MissingRequiredAttribute", XMakeAttributes.include, itemType);
// Exclude must be missing, unless Include exists
ProjectXmlUtilities.VerifyThrowProjectInvalidAttribute(exclude.Length == 0 || include.Length > 0, (XmlAttributeWithLocation)element.Attributes[XMakeAttributes.exclude]);
// If we have an Include attribute at all, it must have non-zero length
ProjectErrorUtilities.VerifyThrowInvalidProject(include.Length > 0 || element.Attributes[XMakeAttributes.include] == null, element.Location, "MissingRequiredAttribute", XMakeAttributes.include, itemType);
XmlUtilities.VerifyThrowProjectValidElementName(element);
ProjectErrorUtilities.VerifyThrowInvalidProject(XMakeElements.IllegalItemPropertyNames[itemType] == null, element.Location, "CannotModifyReservedItem", itemType);
ProjectItemElement item = new ProjectItemElement(element, parent, _project);
foreach (XmlElementWithLocation childElement in ProjectXmlUtilities.GetVerifyThrowProjectChildElements(element))
{
ProjectMetadataElement metadatum = ParseProjectMetadataElement(childElement, item);
item.AppendParentedChildNoChecks(metadatum);
}
return(item);
}
static void generatePageAndModel(ProjectItemGroupElement pige, IXamlFileGenerationData hdp)
{
generatePage(pige, hdp);
generateCompile(pige, hdp.viewModelName);
}
static void generatePage(ProjectItemGroupElement pige, IXamlFileGenerationData ixfgd)
{
// string genType = "Designer";
// string itemType = "Page";
generateNode(pige, ixfgd.xamlName, "Designer", "Page");
generateDependentCompile(pige, ixfgd.codeBehindName, ixfgd.xamlName);
}
/// <summary>
/// Initialize a parented ProjectItemElement instance
/// </summary>
internal ProjectItemElement(XmlElementWithLocation xmlElement, ProjectItemGroupElement parent, ProjectRootElement containingProject)
: base(xmlElement, parent, containingProject)
{
ErrorUtilities.VerifyThrowArgumentNull(parent, "parent");
}
static void fakeH(ProjectItemGroupElement pige)
{
pige.AddItem("ClInclude", "fake.h");
}
/// <summary>
/// Given an element corresponding to a P2P reference, create the appropriate element in the new project
/// </summary>
/// <param name="referenceElement"></param>
/// <param name="referencesItemGroup"></param>
/// <param name="referenceName"></param>
/// <param name="referencedProjectGuid"></param>
/// <returns></returns>
private ProjectItemElement ConvertProjectToProjectReference(XmlElementWithLocation referenceElement, ProjectItemGroupElement referencesItemGroup, string referenceName, ref string referencedProjectGuid)
{
ProjectItemElement newReferenceItem;
// This is a project-to-project reference.
// This gets added as a new XMake item of type "ProjectReference".
// The "Include" attribute should be the relative path from the
// current project to the referenced project file. For example,
// -----------------------------------------------------------------------
// Everett format:
// ===============
// <Reference
// Name = "XMakeTasks"
// Project = "{44342961-78F4-4F98-AFD6-720DA6E648A2}"
// Package = "{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}"
// />
// -----------------------------------------------------------------------
// XMake format:
// =============
// <ProjectReference Include = "..\XMakeTasks\XMakeTasks.csproj">
// <Name>XMakeTasks</Name>
// <Project>{44342961-78F4-4F98-AFD6-720DA6E648A2}</Project>
// <Package>{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}</Package>
// </ProjectReference>
// -----------------------------------------------------------------------
// Apparently, sometimes project reference guids contain additional goo with relative project path.
// Just strip it off. The project system does the same thing, and by doing this early we make
// sure that we have the correct guid attribute in the project file and ResolveNonMSBuildReferences
// does not complain about invalid characters there which causes all the references to fail to resolve.
int barIndex = referencedProjectGuid.IndexOf('|');
if (barIndex != -1)
{
referencedProjectGuid = referencedProjectGuid.Remove(barIndex);
referenceElement.SetAttribute(VSProjectAttributes.project, referencedProjectGuid);
}
string pathToReferencedProject = this.GetRelativePathToReferencedProject(referencedProjectGuid);
if (pathToReferencedProject != null)
{
// For VSD Projects, we want to transform all Everett ( .csdproj & .vbdproj ) project 2 project references into
// Whidbey ( .csproj & .vbproj ) references.
if (0 == String.Compare(Path.GetExtension(pathToReferencedProject),
XMakeProjectStrings.csdprojFileExtension,
StringComparison.OrdinalIgnoreCase))
{
pathToReferencedProject = Path.ChangeExtension(pathToReferencedProject, XMakeProjectStrings.csprojFileExtension);
}
else if (0 == String.Compare(Path.GetExtension(pathToReferencedProject),
XMakeProjectStrings.vbdprojFileExtension,
StringComparison.OrdinalIgnoreCase))
{
pathToReferencedProject = Path.ChangeExtension(pathToReferencedProject, XMakeProjectStrings.vbprojFileExtension);
}
}
// Add a new item to XMake of type "ProjectReference". If we were able to find
// the relative path to the project, use it for the "Include", otherwise just use
// the project name.
string value = (pathToReferencedProject != null) ? pathToReferencedProject : referenceName;
newReferenceItem = referencesItemGroup.AddItem(XMakeProjectStrings.projectReference, ProjectCollection.Escape(value));
return newReferenceItem;
}
static void fakeNone(ProjectItemGroupElement pige)
{
pige.AddItem("None", "fake.txt");
}
/// <summary>
/// Processes the <File> element, and adds an appropriate item to the
/// filesItemGroup.
/// </summary>
/// <owner>RGoel</owner>
private void ProcessFileElement
(
XmlElementWithLocation fileElement,
ProjectItemGroupElement filesItemGroup
)
{
// Make sure this is the <File> element.
error.VerifyThrow((fileElement != null) &&
(fileElement.Name == VSProjectElements.file),
"Expected <File> element.");
// Make sure the caller has already created an ProjectItemGroupElement for us to
// put the new items in.
error.VerifyThrow(filesItemGroup != null, "Received null ProjectItemGroupElement");
// Get the required "RelPath" attribute.
string relPath = fileElement.GetAttribute(VSProjectAttributes.relPath);
ProjectErrorUtilities.VerifyThrowInvalidProject((relPath != null) && (relPath.Length > 0),
fileElement.Location, "MissingAttribute", VSProjectAttributes.relPath, VSProjectElements.file);
// Remove the "RelPath" attribute, so we don't end up adding it twice.
fileElement.RemoveAttribute(VSProjectAttributes.relPath);
// Get the "Link" attribute. This is for linked items only.
string linkPath = fileElement.GetAttribute(VSProjectAttributes.link);
// Remove the "Link" attribute, so we don't end up adding it twice.
fileElement.RemoveAttribute(VSProjectAttributes.link);
// Get the "BuildAction" attribute. If it doesn't exist, figure out
// what the build action is based on the file extension. This is
// what the project loading code does in VS.
string buildAction = fileElement.GetAttribute(VSProjectAttributes.buildAction);
if ((buildAction == null) || (buildAction.Length == 0))
{
buildAction = VSProjectAttributes.buildActionNone;
}
// Remove the "BuildAction" attribute, so we don't end up adding it twice.
fileElement.RemoveAttribute(VSProjectAttributes.buildAction);
ProjectItemElement newFileItem;
// Bug Whidbey #248965. If a .resx file is completely empty, do not include a reference
// to it in the upgraded project file.
if (!
(0 == String.Compare(Path.GetExtension(relPath), ".resx", StringComparison.OrdinalIgnoreCase)
&& IsFilePresentButEmpty(relPath, linkPath))
)
{
// Add the new item to XMake.
if ((linkPath == null) || (linkPath.Length == 0))
{
// Normal item.
// The <File> element gets converted to XMake as a new item, where
// the item type is the BuildAction, and the "Include" contains
// the relative path to the item. For
// example,
// -----------------------------------------------------------------------
// Everett format:
// ===============
// <File
// RelPath = "Properties\PropertyGroupCollection.cs"
// SubType = "Code"
// BuildAction = "Compile"
// />
// -----------------------------------------------------------------------
// XMake format:
// =============
// <Compile Include = "Properties\PropertyGroupCollection.cs">
// <SubType>Code</SubType>
// </Compile>
// -----------------------------------------------------------------------
newFileItem = filesItemGroup.AddItem(buildAction, ProjectCollection.Escape(relPath));
}
else
{
// Linked item.
// The <File> element gets converted to XMake as a new item, where
// the item type is the BuildAction, the "Include" contains
// the physical relative path to the item, and the non-XMake "Link"
// attribute contains the project-relative path for item (for display
// purposes in the Solution Explorer). For example,
// -----------------------------------------------------------------------
// Everett format:
// ===============
// <File
// RelPath = "Properties\PropertyGroupCollection.cs"
// Link = "c:\Rajeev\External\PropertyGroupCollection.cs"
// SubType = "Code"
// BuildAction = "Compile"
// />
// -----------------------------------------------------------------------
// XMake format:
// =============
// <Compile Include = "c:\Rajeev\External\PropertyGroupCollection.cs">
// <Link>Properties\PropertyGroupCollection.cs</Link>
// <SubType>Code</SubType>
// </Compile>
// -----------------------------------------------------------------------
newFileItem = filesItemGroup.AddItem(buildAction, ProjectCollection.Escape(linkPath));
newFileItem.AddMetadata(XMakeProjectStrings.link, ProjectCollection.Escape(relPath));
}
// Add all the rest of the attributes on the <File> element to the new
// XMake item.
foreach (XmlAttribute fileAttribute in fileElement.Attributes)
{
newFileItem.AddMetadata(fileAttribute.Name, ProjectCollection.Escape(fileAttribute.Value));
}
// If this is a VSD(devices) project and we're dealing with a content file,
// mark it to copy if newer.
if ( ( ( ( this.language == VSProjectElements.ECSharp ) ||
( this.language == VSProjectElements.EVisualBasic ) ) ) &&
( 0 == String.Compare ( buildAction, XMakeProjectStrings.content, StringComparison.OrdinalIgnoreCase ) ) )
{
newFileItem.AddMetadata ( XMakeProjectStrings.copytooutput,
XMakeProjectStrings.preservenewest );
}
}
else
{
string warning = ResourceUtilities.FormatString(
AssemblyResources.GetString("EmptyResxRemoved"),
relPath);
conversionWarnings.Add(warning);
}
// There should be no children of the <File> element.
ProjectXmlUtilities.VerifyThrowProjectNoChildElements(fileElement);
}
private async Task RemoveItems(ProjectItemGroupElement parent, Dictionary<string, ProjectItemElement> items, IReadOnlyCollection<string> itemsToRemove, ProjectWriteLockReleaser access) {
await access.CheckoutAsync(itemsToRemove);
foreach (var path in itemsToRemove) {
RemoveItem(parent, items, path);
}
}
static void generateNode(ProjectItemGroupElement pige, string fname, string genType, string itemType)
{
IDictionary<string, string> tmp = new Dictionary<string, string>();
tmp.Add("Generator", "MSBuild:Compile");
tmp.Add("SubType", genType);
pige.AddItem(itemType, fname, tmp);
Debug.Print("Adding: " + fname);
}
/// <summary>
/// Processes the <Import> element, and add an appropriate reference
/// items to the importsItemGroup.
/// </summary>
/// <owner>RGoel</owner>
private void ProcessImportElement
(
XmlElementWithLocation importElement,
ProjectItemGroupElement importsItemGroup
)
{
// Make sure this is the <Import> element.
error.VerifyThrow((importElement != null) &&
(importElement.Name == VSProjectElements.import),
"Expected <Import> element.");
// Make sure the caller has already created an ProjectItemGroupElement for us to
// put the new items in.
error.VerifyThrow(importsItemGroup != null, "Received null ProjectItemGroupElement");
// Get the required "Namespace" attribute.
string importNamespace = importElement.GetAttribute(VSProjectAttributes.importNamespace);
ProjectErrorUtilities.VerifyThrowInvalidProject((importNamespace != null) && (importNamespace.Length > 0),
importElement.Location, "MissingAttribute", VSProjectAttributes.importNamespace, VSProjectElements.import);
// Remove the "Namespace" attribute, so it doesn't show up in our loop later.
importElement.RemoveAttribute(VSProjectAttributes.importNamespace);
// The <Import> element gets converted to XMake as an item of type "Import".
// The "Namespace" attribute becomes the "Include" for the new item. For
// example,
// -----------------------------------------------------------------------
// Everett format:
// ===============
// <Import Namespace = "System.Collections" />
// -----------------------------------------------------------------------
// XMake format:
// =============
// <Import Include="System.Collections" />
// -----------------------------------------------------------------------
importsItemGroup.AddItem(XMakeProjectStrings.import, ProjectCollection.Escape(importNamespace));
// There should be no other attributes on the <Import> element (besides
// "Namespace" which we already took care of). But loop through them
// anyway, so we can emit a useful error message.
foreach (XmlAttributeWithLocation importAttribute in importElement.Attributes)
{
ProjectErrorUtilities.VerifyThrowInvalidProject(false, importAttribute.Location, "UnrecognizedAttribute",
importAttribute.Name, VSProjectElements.import);
}
// There should be no children of the <Import> element.
ProjectXmlUtilities.VerifyThrowProjectNoChildElements(importElement);
}
/// <summary>
/// Processes the <Folder> element, and adds an appropriate item to the
/// filesItemGroup.
/// </summary>
/// <owner>RGoel</owner>
private void ProcessFolderElement
(
XmlElementWithLocation folderElement,
ProjectItemGroupElement filesItemGroup
)
{
// Make sure this is the <Folder> element.
error.VerifyThrow((folderElement != null) &&
(folderElement.Name == VSProjectElements.folder),
"Expected <Folder> element.");
// Make sure the caller has already created an ProjectItemGroupElement for us to
// put the new items in.
error.VerifyThrow(filesItemGroup != null, "Received null ProjectItemGroupElement");
// Get the required "RelPath" attribute.
string relPath = folderElement.GetAttribute(VSProjectAttributes.relPath);
ProjectErrorUtilities.VerifyThrowInvalidProject((relPath != null) && (relPath.Length > 0),
folderElement.Location, "MissingAttribute", VSProjectAttributes.relPath, VSProjectElements.folder);
// Remove the "RelPath" attribute, so we don't end up adding it twice.
folderElement.RemoveAttribute(VSProjectAttributes.relPath);
// We need to find out what type of folder this is -- a web references
// folder, a web reference URL, or just an empty project folder.
// See if there's a "WebReferences" attribute on the <Folder> element. If so,
// and the value is set to "True", then it's a web reference folder.
string webReferences = folderElement.GetAttribute(VSProjectAttributes.webReferences);
// Remove the "WebReferences" attribute, so we don't end up adding it twice.
folderElement.RemoveAttribute(VSProjectAttributes.webReferences);
// See if there's a "WebReferenceURL" attribute. If so, it's a web reference
// URL.
string webReferenceUrl = folderElement.GetAttribute(VSProjectAttributes.webReferenceUrl);
// Remove the "WebReferenceURL" attribute, so we don't end up adding it twice.
folderElement.RemoveAttribute(VSProjectAttributes.webReferenceUrl);
ProjectItemElement newFolderItem;
if ((webReferences != null) && (0 == String.Compare(webReferences, "true", StringComparison.OrdinalIgnoreCase)))
{
// This is a web reference folder.
// The <Folder> element gets converted to XMake as an item of type
// "WebReferences". The "Include" will contain the relative path.
// For example,
// -----------------------------------------------------------------------
// Everett format:
// ===============
// <Folder
// RelPath = "Web References\"
// WebReferences = "TRUE"
// />
// -----------------------------------------------------------------------
// XMake format:
// =============
// <WebReferences Include = "Web References\" />
// -----------------------------------------------------------------------
newFolderItem = filesItemGroup.AddItem(XMakeProjectStrings.webReferences,
ProjectCollection.Escape(relPath));
}
else if ((webReferenceUrl != null) && (webReferenceUrl.Length > 0))
{
// This is an actual web reference URL.
// The <Folder> element gets converted to XMake as an item of type
// "WebReferenceURL". The "Include" will contain the URL.
// For example,
// -----------------------------------------------------------------------
// Everett format:
// ===============
// <Folder
// RelPath = "Web References\mobileakipman\"
// WebReferenceUrl = "http://mobileakipman/HelloName/service1.asmx"
// UrlBehavior = "Static"
// />
// -----------------------------------------------------------------------
// XMake format:
// =============
// <WebReferenceUrl Include="http://mobileakipman/HelloName/service1.asmx">
// <RelPath>Web References\mobileakipman\</RelPath>
// <UrlBehavior>Static</UrlBehavior>
// </WebReferenceUrl>
// -----------------------------------------------------------------------
newFolderItem = filesItemGroup.AddItem(XMakeProjectStrings.webReferenceUrl,
ProjectCollection.Escape(webReferenceUrl));
newFolderItem.AddMetadata(XMakeProjectStrings.relPath, ProjectCollection.Escape(relPath));
// Whidbey projects have some new properties to control the behavior of the
// proxy generation. For projects migrated from Everett, we want to force
// the proxy generation to mimic the Everett behavior, so that people's projects
// still work the same as they did in Everett. (These properties did not
// exist in Everett.) See spec at:
// http://devdiv/SpecTool/Documents/Whidbey/VSCore/Solution%20Project%20Build/FeatureSpecs/Project-WebReferences.doc
if (!this.newWebReferencePropertiesAdded)
{
this.globalPropertyGroup.AddProperty(XMakeProjectStrings.webRefEnableProperties,
(this.language == VSProjectElements.visualJSharp) ? "false" : "true");
this.globalPropertyGroup.AddProperty(XMakeProjectStrings.webRefEnableSqlTypes, "false");
this.globalPropertyGroup.AddProperty(XMakeProjectStrings.webRefEnableLegacyEventing, "true");
this.newWebReferencePropertiesAdded = true;
}
}
else
{
// This is just a project folder that happens not to have any files in it.
// The <Folder> element gets converted to XMake as an item of type "Folder".
// However, we do need to remove the trailing backslash, because XMake
// interprets that as a recursion (bug # 58591). For example,
// -----------------------------------------------------------------------
// Everett format:
// ===============
// <Folder
// RelPath = "MyEmptyProjectFolder\"
// />
// -----------------------------------------------------------------------
// XMake format:
// =============
// <Folder Include="MyEmptyProjectFolder" />
// -----------------------------------------------------------------------
// Remove the trailing backslash. XMake interprets trailing backslashes
// as a recursive wildcard. This will be fixed in M2 -- bug # 58591
if (relPath.EndsWith("\\", StringComparison.Ordinal))
{
relPath = relPath.Remove(relPath.Length - 1, 1);
}
newFolderItem = filesItemGroup.AddItem(XMakeProjectStrings.folder,
ProjectCollection.Escape(relPath));
}
// Add all the rest of the attributes on the <Folder> element to the new
// XMake item.
foreach (XmlAttribute folderAttribute in folderElement.Attributes)
{
newFolderItem.AddMetadata(folderAttribute.Name, ProjectCollection.Escape(folderAttribute.Value));
}
// There should be no children of the <Folder> element.
ProjectXmlUtilities.VerifyThrowProjectNoChildElements(folderElement);
}
/// <summary>
/// Parse a ProjectItemGroupElement
/// </summary>
private ProjectItemGroupElement ParseProjectItemGroupElement(XmlElementWithLocation element, ProjectElementContainer parent)
{
ProjectXmlUtilities.VerifyThrowProjectAttributes(element, s_validAttributesOnlyConditionAndLabel);
ProjectItemGroupElement itemGroup = new ProjectItemGroupElement(element, parent, _project);
foreach (XmlElementWithLocation childElement in ProjectXmlUtilities.GetVerifyThrowProjectChildElements(element))
{
ProjectItemElement item = ParseProjectItemElement(childElement, itemGroup);
itemGroup.AppendParentedChildNoChecks(item);
}
return itemGroup;
}
static void generateCompile(ProjectItemGroupElement pige, string tmp2)
{
generateCompile(pige, tmp2, null);
}
/// <summary>
/// Parse a ProjectItemElement
/// </summary>
private ProjectItemElement ParseProjectItemElement(XmlElementWithLocation element, ProjectItemGroupElement parent)
{
bool belowTarget = parent.Parent is ProjectTargetElement;
string itemType = element.Name;
string include = element.GetAttribute(XMakeAttributes.include);
string exclude = element.GetAttribute(XMakeAttributes.exclude);
string remove = element.GetAttribute(XMakeAttributes.remove);
string update = element.GetAttribute(XMakeAttributes.update);
var exclusiveItemOperation = "";
int exclusiveAttributeCount = 0;
if (element.HasAttribute(XMakeAttributes.include))
{
exclusiveAttributeCount++;
exclusiveItemOperation = XMakeAttributes.include;
}
if (element.HasAttribute(XMakeAttributes.remove))
{
exclusiveAttributeCount++;
exclusiveItemOperation = XMakeAttributes.remove;
}
if (element.HasAttribute(XMakeAttributes.update))
{
exclusiveAttributeCount++;
exclusiveItemOperation = XMakeAttributes.update;
}
// At most one of the include, remove, or update attributes may be specified
if (exclusiveAttributeCount > 1)
{
XmlAttributeWithLocation errorAttribute = remove.Length > 0 ? (XmlAttributeWithLocation)element.Attributes[XMakeAttributes.remove] : (XmlAttributeWithLocation)element.Attributes[XMakeAttributes.update];
ProjectErrorUtilities.ThrowInvalidProject(errorAttribute.Location, "InvalidAttributeExclusive");
}
// Include, remove, or update must be present unless inside a target
ProjectErrorUtilities.VerifyThrowInvalidProject(exclusiveAttributeCount == 1 || belowTarget, element.Location, "IncludeRemoveOrUpdate", exclusiveItemOperation, itemType);
// Exclude must be missing, unless Include exists
ProjectXmlUtilities.VerifyThrowProjectInvalidAttribute(exclude.Length == 0 || include.Length > 0, (XmlAttributeWithLocation)element.Attributes[XMakeAttributes.exclude]);
// If we have an Include attribute at all, it must have non-zero length
ProjectErrorUtilities.VerifyThrowInvalidProject(include.Length > 0 || element.Attributes[XMakeAttributes.include] == null, element.Location, "MissingRequiredAttribute", XMakeAttributes.include, itemType);
// If we have a Remove attribute at all, it must have non-zero length
ProjectErrorUtilities.VerifyThrowInvalidProject(remove.Length > 0 || element.Attributes[XMakeAttributes.remove] == null, element.Location, "MissingRequiredAttribute", XMakeAttributes.remove, itemType);
// If we have an Update attribute at all, it must have non-zero length
ProjectErrorUtilities.VerifyThrowInvalidProject(update.Length > 0 || element.Attributes[XMakeAttributes.update] == null, element.Location, "MissingRequiredAttribute", XMakeAttributes.update, itemType);
XmlUtilities.VerifyThrowProjectValidElementName(element);
ProjectErrorUtilities.VerifyThrowInvalidProject(XMakeElements.IllegalItemPropertyNames[itemType] == null, element.Location, "CannotModifyReservedItem", itemType);
ProjectItemElement item = new ProjectItemElement(element, parent, _project);
foreach (XmlAttributeWithLocation attribute in element.Attributes)
{
bool isKnownAttribute;
bool isValidMetadataNameInAttribute;
CheckMetadataAsAttributeName(attribute.Name, out isKnownAttribute, out isValidMetadataNameInAttribute);
if (!isKnownAttribute && !isValidMetadataNameInAttribute)
{
ProjectXmlUtilities.ThrowProjectInvalidAttribute(attribute);
}
else if (isValidMetadataNameInAttribute)
{
ProjectMetadataElement metadatum = _project.CreateMetadataElement(attribute.Name, attribute.Value);
metadatum.ExpressedAsAttribute = true;
metadatum.Parent = item;
item.AppendParentedChildNoChecks(metadatum);
}
}
foreach (XmlElementWithLocation childElement in ProjectXmlUtilities.GetVerifyThrowProjectChildElements(element))
{
ProjectMetadataElement metadatum = ParseProjectMetadataElement(childElement, item);
item.AppendParentedChildNoChecks(metadatum);
}
return(item);
}
static void generateCompile(ProjectItemGroupElement pige, string tmp2, IDictionary<string, string> tmp)
{
pige.AddItem("Compile", tmp2, tmp);
Debug.Print("Adding: " + tmp2);
}
