public double ExtruderTemperature(int extruderIndex)
{
if (extruderIndex == 0)
{
return(printerSettings.GetValue <double>(SettingsKey.temperature));
}
else
{
// Check if there is a material override for this extruder
// Otherwise, use the SettingsLayers that is bound to this extruder
if (extruderIndex < printerSettings.MaterialSettingsKeys.Count)
{
string materialKey = printerSettings.MaterialSettingsKeys[extruderIndex];
PrinterSettingsLayer layer = printerSettings.GetMaterialLayer(materialKey);
if (layer != null)
{
string result = "0";
if (layer.TryGetValue(SettingsKey.temperature, out result))
{
double value = 0;
if (double.TryParse(result, out value))
{
return(value);
}
}
}
}
// else return the normal settings cascade
return(printerSettings.GetValue <double>(SettingsKey.temperature));
}
}
public void SetValue(string settingsKey, string settingsValue, PrinterSettingsLayer layer = null)
{
// Stash user overrides if a non-user override is being set
if (layer != null && layer != UserLayer)
{
StashUserOverride(layer, settingsKey);
}
else
{
// Remove any staged/conflicting user override, making this the new and active user override
if (StagedUserSettings.ContainsKey(settingsKey))
{
StagedUserSettings.Remove(settingsKey);
}
}
var persistenceLayer = layer ?? UserLayer;
// If the setting exists and is set to the requested value, exit without setting or saving
string existingValue;
if (persistenceLayer.TryGetValue(settingsKey, out existingValue) && existingValue == settingsValue)
{
return;
}
// Otherwise, set and save
persistenceLayer[settingsKey] = settingsValue;
Save();
ActiveSliceSettings.OnSettingChanged(settingsKey);
}
public string ExtruderTemperature(int extruderIndex)
{
if (extruderIndex >= printerSettings.MaterialSettingsKeys.Count)
{
// MaterialSettingsKeys is empty or lacks a value for the given extruder index
//
// If extruder index zero was requested, return the layer cascade temperature value, otherwise null
return((extruderIndex == 0) ? printerSettings.GetValue("temperature") : null);
}
string materialKey = printerSettings.MaterialSettingsKeys[extruderIndex];
if (extruderIndex == 0 && (string.IsNullOrEmpty(materialKey) || printerSettings.UserLayer.ContainsKey("temperature")))
{
// In the case where a user override exists or MaterialSettingsKeys is populated with multiple extruder
// positions but position 0 is empty and thus unassigned, use layer cascade to resolve temp
return(printerSettings.GetValue("temperature"));
}
// Otherwise, use the SettingsLayers that is bound to this extruder
PrinterSettingsLayer layer = printerSettings.GetMaterialLayer(materialKey);
string result = "0";
layer?.TryGetValue("temperature", out result);
return(result);
}
public void firstLayerSpeedEqualsAcceptableValue(PrinterSettings settings, PrinterSettingsLayer layer, string sourceFile)
{
string firstLayerSpeedString;
if (!layer.TryGetValue(SettingsKey.first_layer_speed, out firstLayerSpeedString))
{
return;
}
double firstLayerSpeed;
if (firstLayerSpeedString.Contains("%"))
{
string infillSpeedString = settings.GetValue("infill_speed");
double infillSpeed = double.Parse(infillSpeedString);
firstLayerSpeedString = firstLayerSpeedString.Replace("%", "");
double FirstLayerSpeedPercent = double.Parse(firstLayerSpeedString);
firstLayerSpeed = FirstLayerSpeedPercent * infillSpeed / 100.0;
}
else
{
firstLayerSpeed = double.Parse(firstLayerSpeedString);
}
Assert.Greater(firstLayerSpeed, 5, "Unexpected firstLayerSpeedEqualsAcceptableValue value: " + sourceFile);
}
private void RestoreUserOverride(PrinterSettingsLayer settingsLayer, string settingsKey)
{
string stagedUserOverride;
if (StagedUserSettings.TryGetValue(settingsKey, out stagedUserOverride))
{
StagedUserSettings.Remove(settingsKey);
UserLayer[settingsKey] = stagedUserOverride;
}
}
internal void ClearValue(string sliceSetting, PrinterSettingsLayer layer = null)
{
var persistenceLayer = layer ?? UserLayer;
if (persistenceLayer.ContainsKey(sliceSetting))
{
persistenceLayer.Remove(sliceSetting);
Save();
}
}
/// <summary>
/// Move conflicting user overrides to the temporary staging area, allowing presets values to take effect
/// </summary>
private void StashUserOverride(PrinterSettingsLayer settingsLayer, string settingsKey)
{
string userOverride;
if (this.UserLayer.TryGetValue(settingsKey, out userOverride))
{
this.UserLayer.Remove(settingsKey);
this.StagedUserSettings.Add(settingsKey, userOverride);
}
}
/// <summary>
/// Move conflicting user overrides to the temporary staging area, allowing presets values to take effect
/// </summary>
public void DeactivateConflictingUserOverrides(PrinterSettingsLayer settingsLayer)
{
if (settingsLayer == null)
{
return;
}
foreach (var settingsKey in settingsLayer.Keys)
{
StashUserOverride(settingsLayer, settingsKey);
}
}
public SettingsContext(PrinterConfig printer, IEnumerable <PrinterSettingsLayer> layerCascade, NamedSettingsLayers viewFilter)
{
this.printer = printer;
this.layerCascade = layerCascade;
this.ViewFilter = viewFilter;
// When editing presets, LayerCascade contains a filtered list of settings layers. If the list is null we're in the primarySettingsView
this.IsPrimarySettingsView = layerCascade == null;
// The last layer of the layerFilters is the target persistence
this.persistenceLayer = layerCascade?.First() ?? printer.Settings.UserLayer;
}
public void CopyFrom(PrinterSettings printerSettings)
{
this.OemLayer = printerSettings.OemLayer;
this.MaterialLayers = printerSettings.MaterialLayers;
this.QualityLayers = printerSettings.QualityLayers;
this.UserLayer = printerSettings.UserLayer;
this.ID = printerSettings.ID;
this.QualityLayer = GetQualityLayer(printerSettings.ActiveQualityKey);
this.MaterialLayer = GetMaterialLayer(printerSettings.ActiveMaterialKey);
this.StagedUserSettings = printerSettings.StagedUserSettings;
this.Macros = printerSettings.Macros;
}
internal static void ImportFromExisting(string settingsFilePath)
{
if (string.IsNullOrEmpty(settingsFilePath) || !File.Exists(settingsFilePath))
{
return;
}
var printerInfo = new PrinterInfo
{
Name = Path.GetFileNameWithoutExtension(settingsFilePath),
ID = Guid.NewGuid().ToString()
};
string importType = Path.GetExtension(settingsFilePath).ToLower();
switch (importType)
{
case ".printer":
var profile = ProfileManager.LoadProfileFromDisk(settingsFilePath);
profile.ID = printerInfo.ID;
// TODO: Resolve name conflicts
profile.SetName(printerInfo.Name);
Instance.Profiles.Add(printerInfo);
profile.SaveChanges();
break;
case ".ini":
var settingsToImport = PrinterSettingsLayer.LoadFromIni(settingsFilePath);
var layeredProfile = new PrinterSettings()
{
ID = printerInfo.ID,
OemLayer = settingsToImport
};
// TODO: Resolve name conflicts
layeredProfile.UserLayer[SettingsKey.printer_name.ToString()] = printerInfo.Name;
Instance.Profiles.Add(printerInfo);
layeredProfile.Save();
break;
}
ProfileManager.Instance.Save();
}
private GuiWidget CreateSliceSettingsWidget(PrinterSettingsLayer persistenceLayer)
{
var layerCascade = new List <PrinterSettingsLayer>
{
persistenceLayer,
ActiveSliceSettings.Instance.OemLayer,
ActiveSliceSettings.Instance.BaseLayer
};
return(new SliceSettingsWidget(layerCascade, presetsContext.LayerType)
{
ShowControlBar = false
});
}
private GuiWidget CreateSliceSettingsWidget(PrinterSettingsLayer persistenceLayer)
{
var layerCascade = new List <PrinterSettingsLayer>
{
persistenceLayer,
ActiveSliceSettings.Instance.OemLayer,
ActiveSliceSettings.Instance.BaseLayer
};
var settingsWidget = new SliceSettingsWidget(layerCascade, presetsContext.LayerType);
settingsWidget.settingsControlBar.Visible = false;
return(settingsWidget);
}
internal void SetValue(string settingsKey, string settingsValue, PrinterSettingsLayer layer = null)
{
var persistenceLayer = layer ?? UserLayer;
// If the setting exists and is set the requested value, exit without setting or saving
string existingValue;
if (persistenceLayer.TryGetValue(settingsKey, out existingValue) && existingValue == settingsValue)
{
return;
}
// Otherwise, set and save
persistenceLayer[settingsKey] = settingsValue;
Save();
}
public void Merge(PrinterSettingsLayer destinationLayer, PrinterSettings settingsToImport, List <PrinterSettingsLayer> rawSourceFilter, bool setLayerName)
{
HashSet <string> skipKeys = new HashSet <string>
{
"layer_id",
};
if (!setLayerName)
{
skipKeys.Add(SettingsKey.layer_name);
}
var destinationFilter = new List <PrinterSettingsLayer>
{
OemLayer,
BaseLayer,
destinationLayer,
}.Where(layer => layer != null);
var sourceFilter = rawSourceFilter.Where(layer => layer != null);
foreach (var keyName in PrinterSettings.KnownSettings)
{
if (settingsToImport.Contains(keyName))
{
// Compare the value to import to the layer cascade value and only set if different
string currentValue = this.GetValue(keyName, destinationFilter).Trim();
string importValue = settingsToImport.GetValue(keyName, sourceFilter).Trim();
if (!string.IsNullOrEmpty(importValue) &&
currentValue != keyName &&
!skipKeys.Contains(keyName))
{
destinationLayer[keyName] = importValue;
}
}
}
if (setLayerName)
{
destinationLayer[SettingsKey.layer_name] = settingsToImport.GetValue(SettingsKey.layer_name, sourceFilter);
}
this.Save();
ApplicationController.Instance.ReloadAdvancedControlsPanel();
}
private GuiWidget CreateSliceSettingsWidget(PrinterConfig printer, PrinterSettingsLayer persistenceLayer)
{
var settingsContext = new SettingsContext(
printer,
new List <PrinterSettingsLayer>
{
persistenceLayer,
printer.Settings.OemLayer,
printer.Settings.BaseLayer
},
presetsContext.LayerType);
return(new SliceSettingsWidget(printer, settingsContext, theme)
{
ShowControlBar = false
});
}
private GuiWidget CreateSliceSettingsWidget(PrinterConfig printer, PrinterSettingsLayer persistenceLayer)
{
var settingsContext = new SettingsContext(
printer,
new List <PrinterSettingsLayer>
{
persistenceLayer,
ActiveSliceSettings.Instance.OemLayer,
ActiveSliceSettings.Instance.BaseLayer
},
presetsContext.LayerType);
return(new SliceSettingsWidget(printer, settingsContext, ApplicationController.Instance.Theme)
{
ShowControlBar = false
});
}
public static PrinterSettingsLayer LoadFromIni(TextReader reader)
{
var layer = new PrinterSettingsLayer();
string line;
while ((line = reader.ReadLine()) != null)
{
var segments = line.Split('=');
if (!line.StartsWith("#") && !string.IsNullOrEmpty(line))
{
string key = segments[0].Trim();
layer[key] = segments[1].Trim();
}
}
return(layer);
}
internal void ClearValue(string settingsKey, PrinterSettingsLayer layer = null)
{
var persistenceLayer = layer ?? UserLayer;
if (persistenceLayer.ContainsKey(settingsKey))
{
persistenceLayer.Remove(settingsKey);
// Restore user overrides if a non-user override is being cleared
if (layer != null && layer != UserLayer)
{
RestoreUserOverride(layer, settingsKey);
}
Save();
ActiveSliceSettings.OnSettingChanged(settingsKey);
}
}
public void CopyFrom(PrinterSettings printerSettings)
{
//this.OemLayer.Clear();
//foreach(var kvp in printerSettings.OemLayer)
//{
// this.OemLayer.Add(kvp.Key, kvp.Value);
//}
this.OemLayer = printerSettings.OemLayer;
this.MaterialLayers = printerSettings.MaterialLayers;
this.QualityLayers = printerSettings.QualityLayers;
this.UserLayer = printerSettings.UserLayer;
this.ActiveMaterialKey = printerSettings.ActiveMaterialKey;
this.ActiveQualityKey = printerSettings.ActiveQualityKey;
this.QualityLayer = GetQualityLayer(ActiveQualityKey);
this.MaterialLayer = GetMaterialLayer(ActiveMaterialKey);
}
public static PrinterSettingsLayer LoadFromIni(string filePath)
{
var settings = from line in File.ReadAllLines(filePath)
let segments = line.Split('=')
where !line.StartsWith("#") && !string.IsNullOrEmpty(line) && segments.Length == 2
select new
{
Key = segments[0].Trim(),
Value = segments[1].Trim()
};
var layer = new PrinterSettingsLayer();
foreach (var setting in settings)
{
layer[setting.Key] = setting.Value;
}
return(layer);
}
public void SetValue(string settingsKey, string settingsValue, PrinterSettingsLayer layer = null)
{
var persistenceLayer = layer ?? UserLayer;
if (settingsKey == SettingsKey.active_theme_name)
{
// also save it to the user settings so we can load it first thing on startup before a profile is loaded.
UserSettings.Instance.set(UserSettingsKey.ActiveThemeName, settingsValue);
}
// If the setting exists and is set the requested value, exit without setting or saving
string existingValue;
if (persistenceLayer.TryGetValue(settingsKey, out existingValue) && existingValue == settingsValue)
{
return;
}
// Otherwise, set and save
persistenceLayer[settingsKey] = settingsValue;
Save();
}
public void ClearValue(string settingsKey, PrinterSettingsLayer layer = null)
{
var persistenceLayer = layer ?? UserLayer;
if (persistenceLayer.ContainsKey(settingsKey))
{
persistenceLayer.Remove(settingsKey);
// Restore user overrides if a non-user override is being cleared
if (layer != null && layer != UserLayer)
{
RestoreUserOverride(layer, settingsKey);
}
if (PrinterSettings.SettingsData.TryGetValue(settingsKey, out SliceSettingData settingData))
{
if (settingData.DataEditType == SliceSettingData.DataEditTypes.CHECK_BOX)
{
string checkedKey = this.GetValue <bool>(settingsKey) ? "OnValue" : "OffValue";
// Linked settings should be updated in all cases (user clicked checkbox, user clicked clear)
foreach (var setSettingsData in settingData.SetSettingsOnChange)
{
if (setSettingsData.TryGetValue(checkedKey, out string targetValue))
{
if (this.GetValue(setSettingsData["TargetSetting"]) != targetValue)
{
this.SetValue(setSettingsData["TargetSetting"], targetValue);
}
}
}
}
}
this.OnSettingChanged(settingsKey);
}
}
private void MenuItem_Selected(object sender, EventArgs e)
{
// When a preset is selected store the current values of all known settings to compare against after applying the preset
Dictionary <string, string> settingBeforeChange = new Dictionary <string, string>();
foreach (var keyName in PrinterSettings.KnownSettings)
{
settingBeforeChange.Add(keyName, printer.Settings.GetValue(keyName));
}
var activeSettings = printer.Settings;
MenuItem item = (MenuItem)sender;
PrinterSettingsLayer prevSelection = null;
PrinterSettingsLayer nextSelection = null;
if (layerType == NamedSettingsLayers.Material)
{
if (extruderIndex == 0)
{
if (activeSettings.ActiveMaterialKey != item.Value)
{
// Restore deactivated user overrides by iterating the Material preset we're coming off of
activeSettings.RestoreConflictingUserOverrides(activeSettings.MaterialLayer);
activeSettings.ActiveMaterialKey = item.Value;
// Deactivate conflicting user overrides by iterating the Material preset we've just switched to
activeSettings.DeactivateConflictingUserOverrides(activeSettings.MaterialLayer);
}
}
else // set the temperature for the given extruder
{
var selectedMaterial = activeSettings.MaterialLayers.Where(l => l.LayerID == item.Value).FirstOrDefault();
if (selectedMaterial != null)
{
// first check if the material has an explicit temperature for T1
if (selectedMaterial.TryGetValue(SettingsKey.temperature1, out string temperature1))
{
activeSettings.SetValue(SettingsKey.temperature1, temperature1);
}
else
{
selectedMaterial.TryGetValue(SettingsKey.temperature, out string temperature);
activeSettings.SetValue(SettingsKey.temperature1, temperature);
}
}
else
{
activeSettings.SetValue(SettingsKey.temperature1, printer.Settings.GetValue(SettingsKey.temperature));
}
}
}
else if (layerType == NamedSettingsLayers.Quality)
{
if (activeSettings.ActiveQualityKey != item.Value)
{
prevSelection = activeSettings.QualityLayer;
// Restore deactivated user overrides by iterating the Quality preset we're coming off of
activeSettings.RestoreConflictingUserOverrides(activeSettings.QualityLayer);
activeSettings.ActiveQualityKey = item.Value;
nextSelection = activeSettings.QualityLayer;
// Deactivate conflicting user overrides by iterating the Quality preset we've just switched to
activeSettings.DeactivateConflictingUserOverrides(activeSettings.QualityLayer);
}
}
// Ensure that activated or deactivated user overrides are always persisted to disk
activeSettings.Save();
UiThread.RunOnIdle(() =>
{
var settingsToUpdate = new HashSet <string>();
foreach (var keyName in PrinterSettings.KnownSettings)
{
if (settingBeforeChange[keyName] != printer.Settings.GetValue(keyName))
{
settingsToUpdate.Add(keyName);
}
}
if (prevSelection != null)
{
foreach (var kvp in prevSelection)
{
settingsToUpdate.Add(kvp.Key);
}
}
if (nextSelection != null)
{
foreach (var kvp in nextSelection)
{
settingsToUpdate.Add(kvp.Key);
}
}
foreach (var keyName in settingsToUpdate)
{
printer.Settings.OnSettingChanged(keyName);
}
});
editButton.Enabled = item.Text != defaultMenuItemText;
}
public static PrinterSettingsLayer LoadFromIni(TextReader reader)
{
var layer = new PrinterSettingsLayer();
string line;
while ((line = reader.ReadLine()) != null)
{
var segments = line.Split('=');
if (!line.StartsWith("#") && !string.IsNullOrEmpty(line))
{
string key = segments[0].Trim();
layer[key] = segments[1].Trim();
}
}
return layer;
}
public PresetsContext(ObservableCollection <PrinterSettingsLayer> settingsLayers, PrinterSettingsLayer activeLayer)
{
this.PersistenceLayer = activeLayer;
this.PresetLayers = settingsLayers;
}
private static void AddComMenuItems(SliceSettingData settingData, PrinterSettingsLayer persistenceLayer, SettingsRow settingsRow, DropDownList selectableOptions)
{
selectableOptions.MenuItems.Clear();
string machineSpecificComPortValue = ActiveSliceSettings.Instance.Helpers.ComPort();
foreach (string listItem in FrostedSerialPort.GetPortNames())
{
MenuItem newItem = selectableOptions.AddItem(listItem);
if (newItem.Text == machineSpecificComPortValue)
{
selectableOptions.SelectedLabel = machineSpecificComPortValue;
}
newItem.Selected += (sender, e) =>
{
MenuItem menuItem = ((MenuItem)sender);
// Directly set the ComPort
if (persistenceLayer == null)
{
ActiveSliceSettings.Instance.Helpers.SetComPort(menuItem.Text);
}
else
{
ActiveSliceSettings.Instance.Helpers.SetComPort(menuItem.Text, persistenceLayer);
}
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
}
}
public void SetComPort(string port, PrinterSettingsLayer layer)
{
printerSettings.SetValue($"{Environment.MachineName}_com_port", port, layer);
}
private static void SaveCommaSeparatedIndexSetting(int extruderIndexLocal, List<PrinterSettingsLayer> layerCascade, string slicerConfigName, string newSingleValue, PrinterSettingsLayer persistenceLayer)
{
string[] settings = GetActiveValue(slicerConfigName, layerCascade).Split(',');
if (settings.Length > extruderIndexLocal)
{
settings[extruderIndexLocal] = newSingleValue;
}
else
{
string[] newSettings = new string[extruderIndexLocal + 1];
for (int i = 0; i < extruderIndexLocal + 1; i++)
{
newSettings[i] = "";
if (i < settings.Length)
{
newSettings[i] = settings[i];
}
else if (i == extruderIndexLocal)
{
newSettings[i] = newSingleValue;
}
}
settings = newSettings;
}
string newValue = string.Join(",", settings);
ActiveSliceSettings.Instance.SetValue(slicerConfigName, newValue, persistenceLayer);
}
public PresetsContext(ObservableCollection<PrinterSettingsLayer> settingsLayers, PrinterSettingsLayer activeLayer)
{
this.PersistenceLayer = activeLayer;
this.PresetLayers = settingsLayers;
}
public void testBottomSolidLayersOneMM(PrinterSettingsLayer layer, string sourceFile)
{
string settingValue;
if (!layer.TryGetValue("bottom_solid_layers", out settingValue))
{
return;
}
Assert.AreEqual("1mm", settingValue, "bottom_solid_layers should be 1mm: " + sourceFile);
}
public void testFirstLayerBedTemperatureNotInStartGcode(PrinterSettingsLayer layer, string sourceFile)
{
string settingValue;
if (!layer.TryGetValue("start_gcode", out settingValue))
{
return;
}
Assert.False(settingValue.Contains("first_layer_bed_temperature"), "start_gcode should not contain first_layer_bed_temperature: " + sourceFile);
}
public void maxFanSpeedNotGreaterThanOneHundred(PrinterSettingsLayer layer, string sourceFile)
{
string settingValue;
if (!layer.TryGetValue("max_fan_speed", out settingValue))
{
return;
}
Assert.LessOrEqual(int.Parse(settingValue), 100, "max_fan_speed should be less than or equal to 100: " + sourceFile);
}
public void noCurlyBracketsInEndGcode(PrinterSettingsLayer layer, string sourceFile)
{
string settingValue;
if (!layer.TryGetValue("end_gcode", out settingValue))
{
return;
}
Assert.False(settingValue.Contains("{"), "end_gcode should not contain braces: " + sourceFile);
}
public void firstLayerExtrusionWidthAcceptableValue(PrinterSettings printerSettings, PrinterSettingsLayer layer, string sourceFile)
{
string firstLayerExtrusionWidth;
if (!layer.TryGetValue(SettingsKey.first_layer_extrusion_width, out firstLayerExtrusionWidth))
{
return;
}
float convertedFirstLayerExtrusionWidth;
string nozzleDiameter = printerSettings.GetValue(SettingsKey.nozzle_diameter);
float acceptableValue = float.Parse(nozzleDiameter) * 4;
if (firstLayerExtrusionWidth.Contains("%"))
{
string reformatFirstLayerExtrusionWidth = firstLayerExtrusionWidth.Replace("%", " ");
convertedFirstLayerExtrusionWidth = float.Parse(reformatFirstLayerExtrusionWidth) / 100;
}
else
{
convertedFirstLayerExtrusionWidth = float.Parse(firstLayerExtrusionWidth);
}
Assert.LessOrEqual(convertedFirstLayerExtrusionWidth, acceptableValue, "Unexpected firstLayerExtrusionWidthAcceptableValue value: " + sourceFile);
}
internal static bool ImportFromExisting(string settingsFilePath)
{
if (string.IsNullOrEmpty(settingsFilePath) || !File.Exists(settingsFilePath))
{
return(false);
}
var printerInfo = new PrinterInfo
{
Name = Path.GetFileNameWithoutExtension(settingsFilePath),
ID = Guid.NewGuid().ToString()
};
bool importSuccessful = false;
string importType = Path.GetExtension(settingsFilePath).ToLower();
switch (importType)
{
case ProfileManager.ProfileExtension:
var profile = PrinterSettings.LoadFile(settingsFilePath);
profile.ID = printerInfo.ID;
profile.ClearValue(SettingsKey.device_token);
printerInfo.DeviceToken = "";
// TODO: Resolve name conflicts
profile.Helpers.SetName(printerInfo.Name);
Instance.Profiles.Add(printerInfo);
profile.Save();
importSuccessful = true;
break;
case ".ini":
//Scope variables
{
var settingsToImport = PrinterSettingsLayer.LoadFromIni(settingsFilePath);
var layeredProfile = new PrinterSettings()
{
ID = printerInfo.ID,
};
bool containsValidSetting = false;
var activeSettings = layeredProfile;
foreach (var item in settingsToImport)
{
if (activeSettings.Contains(item.Key))
{
containsValidSetting = true;
string currentValue = activeSettings.GetValue(item.Key).Trim();
// Compare the value to import to the layer cascade value and only set if different
if (currentValue != item.Value)
{
activeSettings.OemLayer[item.Key] = item.Value;
}
}
}
if (containsValidSetting)
{
// TODO: Resolve name conflicts
layeredProfile.UserLayer[SettingsKey.printer_name] = printerInfo.Name;
layeredProfile.ClearValue(SettingsKey.device_token);
printerInfo.DeviceToken = "";
Instance.Profiles.Add(printerInfo);
layeredProfile.Save();
importSuccessful = true;
}
}
break;
}
return(importSuccessful);
}
internal static bool ImportFromExisting(string settingsFilePath)
{
if (string.IsNullOrEmpty(settingsFilePath) || !File.Exists(settingsFilePath))
{
return(false);
}
string fileName = Path.GetFileNameWithoutExtension(settingsFilePath);
var existingPrinterNames = Instance.ActiveProfiles.Select(p => p.Name);
var printerInfo = new PrinterInfo
{
Name = agg_basics.GetNonCollidingName(existingPrinterNames, fileName),
ID = Guid.NewGuid().ToString(),
Make = "Other",
Model = "Other",
};
bool importSuccessful = false;
string importType = Path.GetExtension(settingsFilePath).ToLower();
switch (importType)
{
case ProfileManager.ProfileExtension:
// Add the Settings as a profile before performing any actions on it to ensure file paths resolve
{
Instance.Profiles.Add(printerInfo);
var printerSettings = PrinterSettings.LoadFile(settingsFilePath);
printerSettings.ID = printerInfo.ID;
printerSettings.ClearValue(SettingsKey.device_token);
printerInfo.DeviceToken = "";
// TODO: Resolve name conflicts
printerSettings.Helpers.SetName(printerInfo.Name);
if (printerSettings.OemLayer.ContainsKey(SettingsKey.make))
{
printerInfo.Make = printerSettings.OemLayer[SettingsKey.make];
}
if (printerSettings.OemLayer.ContainsKey(SettingsKey.model))
{
printerInfo.Model = printerSettings.OemLayer[SettingsKey.model] ?? "Other";
}
printerSettings.Save();
importSuccessful = true;
}
break;
case ".ini":
//Scope variables
{
var settingsToImport = PrinterSettingsLayer.LoadFromIni(settingsFilePath);
var printerSettings = new PrinterSettings()
{
ID = printerInfo.ID,
};
bool containsValidSetting = false;
printerSettings.OemLayer = new PrinterSettingsLayer();
printerSettings.OemLayer[SettingsKey.make] = "Other";
printerSettings.OemLayer[SettingsKey.model] = "Other";
foreach (var item in settingsToImport)
{
if (printerSettings.Contains(item.Key))
{
containsValidSetting = true;
string currentValue = printerSettings.GetValue(item.Key).Trim();
// Compare the value to import to the layer cascade value and only set if different
if (currentValue != item.Value)
{
printerSettings.OemLayer[item.Key] = item.Value;
}
}
}
if (containsValidSetting)
{
printerSettings.UserLayer[SettingsKey.printer_name] = printerInfo.Name;
printerSettings.ClearValue(SettingsKey.device_token);
printerInfo.DeviceToken = "";
printerInfo.Make = printerSettings.OemLayer[SettingsKey.make] ?? "Other";
printerInfo.Model = printerSettings.OemLayer[SettingsKey.model] ?? "Other";
Instance.Profiles.Add(printerInfo);
printerSettings.Helpers.SetName(printerInfo.Name);
printerSettings.Save();
importSuccessful = true;
}
}
break;
}
return(importSuccessful);
}
public SliceSettingsWidget(List<PrinterSettingsLayer> layerCascade = null, NamedSettingsLayers viewFilter = NamedSettingsLayers.All)
{
this.layerCascade = layerCascade;
this.viewFilter = viewFilter;
// The last layer of the layerFilters is the target persistence layer
persistenceLayer = layerCascade?.First() ?? ActiveSliceSettings.Instance.UserLayer;
textImageButtonFactory = new TextImageButtonFactory();
textImageButtonFactory.normalFillColor = RGBA_Bytes.Transparent;
textImageButtonFactory.FixedHeight = 15 * GuiWidget.DeviceScale;
textImageButtonFactory.fontSize = 8;
textImageButtonFactory.borderWidth = 1;
textImageButtonFactory.normalBorderColor = new RGBA_Bytes(ActiveTheme.Instance.PrimaryTextColor, 200);
textImageButtonFactory.hoverBorderColor = new RGBA_Bytes(ActiveTheme.Instance.PrimaryTextColor, 200);
this.textImageButtonFactory.disabledTextColor = RGBA_Bytes.Gray;
this.textImageButtonFactory.hoverTextColor = ActiveTheme.Instance.PrimaryTextColor;
this.textImageButtonFactory.normalTextColor = ActiveTheme.Instance.SecondaryTextColor;
this.textImageButtonFactory.pressedTextColor = ActiveTheme.Instance.PrimaryTextColor;
buttonFactory.FixedHeight = 20 * GuiWidget.DeviceScale;
buttonFactory.fontSize = 10;
buttonFactory.normalFillColor = RGBA_Bytes.White;
buttonFactory.normalTextColor = RGBA_Bytes.DarkGray;
FlowLayoutWidget pageTopToBottomLayout = new FlowLayoutWidget(FlowDirection.TopToBottom, vAnchor: Agg.UI.VAnchor.ParentTop);
pageTopToBottomLayout.AnchorAll();
pageTopToBottomLayout.Padding = new BorderDouble(3, 0);
this.AddChild(pageTopToBottomLayout);
settingsControlBar = new SettingsControlBar()
{
HAnchor = HAnchor.ParentLeftRight,
BackgroundColor = ActiveTheme.Instance.TransparentDarkOverlay,
Padding = new BorderDouble(8, 12, 8, 8)
};
pageTopToBottomLayout.AddChild(settingsControlBar);
noConnectionMessageContainer = new AltGroupBox(new TextWidget("No Printer Selected".Localize(), pointSize: 18, textColor: ActiveTheme.Instance.SecondaryAccentColor));
noConnectionMessageContainer.Margin = new BorderDouble(top: 10);
noConnectionMessageContainer.BorderColor = ActiveTheme.Instance.PrimaryTextColor;
noConnectionMessageContainer.HAnchor = Agg.UI.HAnchor.ParentLeftRight;
noConnectionMessageContainer.Height = 90;
string noConnectionString = "No printer is currently selected. Please select a printer to edit slice settings.".Localize();
noConnectionString += "\n\n" + "NOTE: You need to select a printer, but do not need to connect to it.".Localize();
TextWidget noConnectionMessage = new TextWidget(noConnectionString, pointSize: 10);
noConnectionMessage.Margin = new BorderDouble(5);
noConnectionMessage.TextColor = ActiveTheme.Instance.PrimaryTextColor;
noConnectionMessage.VAnchor = VAnchor.ParentCenter;
noConnectionMessageContainer.AddChild(noConnectionMessage);
pageTopToBottomLayout.AddChild(noConnectionMessageContainer);
topCategoryTabs = new TabControl();
topCategoryTabs.TabBar.BorderColor = ActiveTheme.Instance.PrimaryTextColor;
topCategoryTabs.Margin = new BorderDouble(top: 8);
topCategoryTabs.AnchorAll();
sliceSettingsDetailControl = new SliceSettingsDetailControl(layerCascade);
List<TabBar> sideTabBarsListForLayout = new List<TabBar>();
for (int topCategoryIndex = 0; topCategoryIndex < SliceSettingsOrganizer.Instance.UserLevels[UserLevel].CategoriesList.Count; topCategoryIndex++)
{
OrganizerCategory category = SliceSettingsOrganizer.Instance.UserLevels[UserLevel].CategoriesList[topCategoryIndex];
string categoryPageLabel = category.Name.Localize();
TabPage categoryPage = new TabPage(categoryPageLabel);
SimpleTextTabWidget textTabWidget = new SimpleTextTabWidget(categoryPage, category.Name + " Tab", 16,
ActiveTheme.Instance.TabLabelSelected, new RGBA_Bytes(), ActiveTheme.Instance.TabLabelUnselected, new RGBA_Bytes());
categoryPage.AnchorAll();
topCategoryTabs.AddTab(textTabWidget);
TabControl sideTabs = CreateSideTabsAndPages(category);
sideTabBarsListForLayout.Add(sideTabs.TabBar);
categoryPage.AddChild(sideTabs);
}
topCategoryTabs.TabBar.AddChild(new HorizontalSpacer());
topCategoryTabs.TabBar.AddChild(sliceSettingsDetailControl);
if (sliceSettingsDetailControl.SelectedValue == "Advanced" && ActiveSliceSettings.Instance.Helpers.ActiveSliceEngineType() == SlicingEngineTypes.Slic3r)
{
TabPage extraSettingsPage = new TabPage("Other");
SimpleTextTabWidget extraSettingsTextTabWidget = new SimpleTextTabWidget(extraSettingsPage, "Other Tab", 16,
ActiveTheme.Instance.TabLabelSelected, new RGBA_Bytes(), ActiveTheme.Instance.TabLabelUnselected, new RGBA_Bytes());
extraSettingsPage.AnchorAll();
int count;
TabControl extraSettingsSideTabs = CreateExtraSettingsSideTabsAndPages(topCategoryTabs, out count);
if (count > 0)
{
topCategoryTabs.AddTab(extraSettingsTextTabWidget);
sideTabBarsListForLayout.Add(extraSettingsSideTabs.TabBar);
extraSettingsPage.AddChild(extraSettingsSideTabs);
}
}
double sideTabBarsMinimumWidth = 0;
foreach (TabBar tabBar in sideTabBarsListForLayout)
{
sideTabBarsMinimumWidth = Math.Max(sideTabBarsMinimumWidth, tabBar.Width);
}
foreach (TabBar tabBar in sideTabBarsListForLayout)
{
tabBar.MinimumSize = new Vector2(sideTabBarsMinimumWidth, tabBar.MinimumSize.y);
}
// check if there is only one left side tab. If so hide the left tabs and expand the content.
foreach(var tabList in sideTabBarsListForLayout)
{
if(tabList.CountVisibleChildren() == 1)
{
tabList.MinimumSize = new Vector2(0, 0);
tabList.Width = 0;
}
}
pageTopToBottomLayout.AddChild(topCategoryTabs);
AddHandlers();
SetVisibleControls();
// Make sure we are on the right tab when we create this view
{
string settingsName = "SliceSettingsWidget_CurrentTab";
string selectedTab = UserSettings.Instance.get(settingsName);
topCategoryTabs.SelectTab(selectedTab);
topCategoryTabs.TabBar.TabIndexChanged += (object sender, EventArgs e) =>
{
string selectedTabName = topCategoryTabs.TabBar.SelectedTabName;
if (!string.IsNullOrEmpty(selectedTabName))
{
if (layerCascade == null)
{
UserSettings.Instance.set(settingsName, selectedTabName);
}
}
};
}
this.AnchorAll();
}
public void firstLayerHeightLessThanNozzleDiameter(PrinterSettings printerSettings, PrinterSettingsLayer layer, string sourceFile)
{
string firstLayerHeight;
if (!layer.TryGetValue(SettingsKey.first_layer_height, out firstLayerHeight))
{
return;
}
float convertedFirstLayerHeightValue;
if (firstLayerHeight.Contains("%"))
{
string reFormatLayerHeight = firstLayerHeight.Replace("%", " ");
convertedFirstLayerHeightValue = float.Parse(reFormatLayerHeight) / 100;
}
else
{
convertedFirstLayerHeightValue = float.Parse(firstLayerHeight);
}
string nozzleDiameter = printerSettings.GetValue(SettingsKey.nozzle_diameter);
Assert.LessOrEqual(convertedFirstLayerHeightValue, float.Parse(nozzleDiameter), "Unexpected firstLayerHeightLessThanNozzleDiameter value: " + sourceFile);
}
private static GuiWidget CreateSettingInfoUIControls(SliceSettingData settingData, List<PrinterSettingsLayer> layerCascade, PrinterSettingsLayer persistenceLayer,
NamedSettingsLayers viewFilter,
int extruderIndex, out bool addControl, ref int tabIndexForItem)
{
addControl = true;
GuiWidget container = new GuiWidget();
string sliceSettingValue = GetActiveValue(settingData.SlicerConfigName, layerCascade);
GuiWidget nameArea = new GuiWidget(HAnchor.ParentLeftRight, VAnchor.FitToChildren | VAnchor.ParentCenter);
var dataArea = new FlowLayoutWidget();
GuiWidget unitsArea = new GuiWidget(HAnchor.AbsolutePosition, VAnchor.FitToChildren | VAnchor.ParentCenter)
{
Width = settingData.ShowAsOverride ? 50 * GuiWidget.DeviceScale : 5,
};
GuiWidget restoreArea = new GuiWidget(HAnchor.AbsolutePosition, VAnchor.FitToChildren | VAnchor.ParentCenter)
{
Width = settingData.ShowAsOverride ? 30 * GuiWidget.DeviceScale : 0,
};
var settingsRow = new SettingsRow(layerCascade)
{
SettingsKey = settingData.SlicerConfigName,
SettingsValue = sliceSettingValue,
};
settingsRow.AddChild(nameArea);
settingsRow.AddChild(dataArea);
settingsRow.AddChild(unitsArea);
settingsRow.AddChild(restoreArea);
settingsRow.Name = settingData.SlicerConfigName + " Edit Field";
if (!PrinterSettings.KnownSettings.Contains(settingData.SlicerConfigName))
{
// the setting we think we are adding is not in the known settings it may have been deprecated
TextWidget settingName = new TextWidget(String.Format("Setting '{0}' not found in known settings", settingData.SlicerConfigName));
settingName.TextColor = ActiveTheme.Instance.PrimaryTextColor;
//settingName.MinimumSize = new Vector2(minSettingNameWidth, settingName.MinimumSize.y);
nameArea.AddChild(settingName);
nameArea.BackgroundColor = RGBA_Bytes.Red;
}
else
{
int intEditWidth = (int)(60 * GuiWidget.DeviceScale + .5);
int doubleEditWidth = (int)(60 * GuiWidget.DeviceScale + .5);
int vectorXYEditWidth = (int)(60 * GuiWidget.DeviceScale + .5);
int multiLineEditHeight = (int)(120 * GuiWidget.DeviceScale + .5);
if (settingData.DataEditType != SliceSettingData.DataEditTypes.MULTI_LINE_TEXT)
{
var nameHolder = new GuiWidget(HAnchor.ParentLeftRight, VAnchor.FitToChildren | VAnchor.ParentCenter)
{
Padding = new BorderDouble(0, 0, 5, 0),
HAnchor = HAnchor.ParentLeftRight,
};
nameHolder.AddChild(new WrappedTextWidget(settingData.PresentationName.Localize(), pointSize: 10, textColor: ActiveTheme.Instance.PrimaryTextColor));
nameArea.AddChild(nameHolder);
}
switch (settingData.DataEditType)
{
case SliceSettingData.DataEditTypes.INT:
{
FlowLayoutWidget content = new FlowLayoutWidget();
int currentValue;
int.TryParse(sliceSettingValue, out currentValue);
var intEditWidget = new MHNumberEdit(currentValue, pixelWidth: intEditWidth, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
SelectAllOnFocus = true,
Name = settingData.PresentationName + " Edit",
};
intEditWidget.ActuallNumberEdit.EditComplete += (sender, e) =>
{
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, ((NumberEdit)sender).Value.ToString(), persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
content.AddChild(intEditWidget);
unitsArea.AddChild(GetExtraSettingsWidget(settingData));
if (settingData.QuickMenuSettings.Count > 0)
{
dataArea.AddChild(CreateQuickMenu(settingData, persistenceLayer, content, intEditWidget.ActuallNumberEdit.InternalTextEditWidget, layerCascade));
}
else
{
dataArea.AddChild(content);
}
settingsRow.ValueChanged = (text) =>
{
intEditWidget.Text = text;
};
}
break;
case SliceSettingData.DataEditTypes.DOUBLE:
{
double currentValue;
double.TryParse(sliceSettingValue, out currentValue);
var doubleEditWidget = new MHNumberEdit(currentValue, allowNegatives: true, allowDecimals: true, pixelWidth: doubleEditWidth, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
SelectAllOnFocus = true
};
doubleEditWidget.ActuallNumberEdit.EditComplete += (sender, e) =>
{
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, ((NumberEdit)sender).Value.ToString(), persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
dataArea.AddChild(doubleEditWidget);
unitsArea.AddChild(GetExtraSettingsWidget(settingData));
settingsRow.ValueChanged = (text) =>
{
double currentValue2 = 0;
double.TryParse(text, out currentValue2);
doubleEditWidget.ActuallNumberEdit.Value = currentValue2;
};
}
break;
case SliceSettingData.DataEditTypes.POSITIVE_DOUBLE:
{
const string multiValuesAreDiffernt = "-";
FlowLayoutWidget content = new FlowLayoutWidget();
var doubleEditWidget = new MHNumberEdit(0, allowDecimals: true, pixelWidth: doubleEditWidth, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
Name = settingData.PresentationName + " Textbox",
SelectAllOnFocus = true
};
double currentValue;
bool ChangesMultipleOtherSettings = settingData.SetSettingsOnChange.Count > 0;
if (ChangesMultipleOtherSettings)
{
bool allTheSame = true;
string setting = GetActiveValue(settingData.SetSettingsOnChange[0], layerCascade);
for (int i = 1; i < settingData.SetSettingsOnChange.Count; i++)
{
string nextSetting = GetActiveValue(settingData.SetSettingsOnChange[i], layerCascade);
if (setting != nextSetting)
{
allTheSame = false;
break;
}
}
if (allTheSame && setting.EndsWith("mm"))
{
double.TryParse(setting.Substring(0, setting.Length - 2), out currentValue);
doubleEditWidget.ActuallNumberEdit.Value = currentValue;
}
else
{
doubleEditWidget.ActuallNumberEdit.InternalNumberEdit.Text = multiValuesAreDiffernt;
}
}
else // just set the setting normally
{
double.TryParse(sliceSettingValue, out currentValue);
doubleEditWidget.ActuallNumberEdit.Value = currentValue;
}
doubleEditWidget.ActuallNumberEdit.InternalTextEditWidget.MarkAsStartingState();
doubleEditWidget.ActuallNumberEdit.EditComplete += (sender, e) =>
{
NumberEdit numberEdit = (NumberEdit)sender;
// If this setting sets other settings, then do that.
if (ChangesMultipleOtherSettings
&& numberEdit.Text != multiValuesAreDiffernt)
{
foreach (string setting in settingData.SetSettingsOnChange)
{
ActiveSliceSettings.Instance.SetValue(setting, numberEdit.Value.ToString() + "mm", persistenceLayer);
}
}
// also always save to the local setting
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, numberEdit.Value.ToString(), persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
content.AddChild(doubleEditWidget);
unitsArea.AddChild(GetExtraSettingsWidget(settingData));
if (settingData.QuickMenuSettings.Count > 0)
{
dataArea.AddChild(CreateQuickMenu(settingData, persistenceLayer, content, doubleEditWidget.ActuallNumberEdit.InternalTextEditWidget, layerCascade));
}
else
{
dataArea.AddChild(content);
}
settingsRow.ValueChanged = (text) =>
{
double currentValue2 = 0;
double.TryParse(text, out currentValue2);
doubleEditWidget.ActuallNumberEdit.Value = currentValue2;
};
}
break;
case SliceSettingData.DataEditTypes.OFFSET:
{
double currentValue;
double.TryParse(sliceSettingValue, out currentValue);
var doubleEditWidget = new MHNumberEdit(currentValue, allowDecimals: true, allowNegatives: true, pixelWidth: doubleEditWidth, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
SelectAllOnFocus = true
};
doubleEditWidget.ActuallNumberEdit.EditComplete += (sender, e) =>
{
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, ((NumberEdit)sender).Value.ToString(), persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
dataArea.AddChild(doubleEditWidget);
unitsArea.AddChild(GetExtraSettingsWidget(settingData));
settingsRow.ValueChanged = (text) =>
{
double currentValue2;
double.TryParse(text, out currentValue2);
doubleEditWidget.ActuallNumberEdit.Value = currentValue2;
};
}
break;
case SliceSettingData.DataEditTypes.DOUBLE_OR_PERCENT:
{
FlowLayoutWidget content = new FlowLayoutWidget();
var stringEdit = new MHTextEditWidget(sliceSettingValue, pixelWidth: doubleEditWidth - 2, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
SelectAllOnFocus = true
};
stringEdit.ActualTextEditWidget.EditComplete += (sender, e) =>
{
var textEditWidget = (TextEditWidget)sender;
string text = textEditWidget.Text.Trim();
bool isPercent = text.Contains("%");
if (isPercent)
{
text = text.Substring(0, text.IndexOf("%"));
}
double result;
double.TryParse(text, out result);
text = result.ToString();
if (isPercent)
{
text += "%";
}
textEditWidget.Text = text;
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, textEditWidget.Text, persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
stringEdit.ActualTextEditWidget.InternalTextEditWidget.AllSelected += (sender, e) =>
{
// select everything up to the % (if present)
InternalTextEditWidget textEditWidget = (InternalTextEditWidget)sender;
int percentIndex = textEditWidget.Text.IndexOf("%");
if (percentIndex != -1)
{
textEditWidget.SetSelection(0, percentIndex - 1);
}
};
content.AddChild(stringEdit);
unitsArea.AddChild(GetExtraSettingsWidget(settingData));
if (settingData.QuickMenuSettings.Count > 0)
{
dataArea.AddChild(CreateQuickMenu(settingData, persistenceLayer, content, stringEdit.ActualTextEditWidget.InternalTextEditWidget, layerCascade));
}
else
{
dataArea.AddChild(content);
}
settingsRow.ValueChanged = (text) =>
{
stringEdit.Text = text;
};
}
break;
case SliceSettingData.DataEditTypes.INT_OR_MM:
{
FlowLayoutWidget content = new FlowLayoutWidget();
var stringEdit = new MHTextEditWidget(sliceSettingValue, pixelWidth: doubleEditWidth - 2, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
SelectAllOnFocus = true
};
string startingText = stringEdit.Text;
stringEdit.ActualTextEditWidget.EditComplete += (sender, e) =>
{
TextEditWidget textEditWidget = (TextEditWidget)sender;
// only validate when we lose focus
if (!textEditWidget.ContainsFocus)
{
string text = textEditWidget.Text;
text = text.Trim();
bool isMm = text.Contains("mm");
if (isMm)
{
text = text.Substring(0, text.IndexOf("mm"));
}
double result;
double.TryParse(text, out result);
text = result.ToString();
if (isMm)
{
text += "mm";
}
else
{
result = (int)result;
text = result.ToString();
}
textEditWidget.Text = text;
startingText = stringEdit.Text;
}
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, textEditWidget.Text, persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
// make sure we are still looking for the final validation before saving.
if (textEditWidget.ContainsFocus)
{
UiThread.RunOnIdle(() =>
{
string currentText = textEditWidget.Text;
int cursorIndex = textEditWidget.InternalTextEditWidget.CharIndexToInsertBefore;
textEditWidget.Text = startingText;
textEditWidget.InternalTextEditWidget.MarkAsStartingState();
textEditWidget.Text = currentText;
textEditWidget.InternalTextEditWidget.CharIndexToInsertBefore = cursorIndex;
});
}
};
stringEdit.ActualTextEditWidget.InternalTextEditWidget.AllSelected += (sender, e) =>
{
// select everything up to the mm (if present)
InternalTextEditWidget textEditWidget = (InternalTextEditWidget)sender;
int mMIndex = textEditWidget.Text.IndexOf("mm");
if (mMIndex != -1)
{
textEditWidget.SetSelection(0, mMIndex - 1);
}
};
content.AddChild(stringEdit);
unitsArea.AddChild(GetExtraSettingsWidget(settingData));
if (settingData.QuickMenuSettings.Count > 0)
{
dataArea.AddChild(CreateQuickMenu(settingData, persistenceLayer, content, stringEdit.ActualTextEditWidget.InternalTextEditWidget, layerCascade));
}
else
{
dataArea.AddChild(content);
}
settingsRow.ValueChanged = (text) =>
{
stringEdit.Text = text;
};
}
break;
case SliceSettingData.DataEditTypes.CHECK_BOX:
{
var checkBoxWidget = new CheckBox("")
{
Name = settingData.PresentationName + " Checkbox",
ToolTipText = settingData.HelpText,
VAnchor = Agg.UI.VAnchor.ParentBottom,
TextColor = ActiveTheme.Instance.PrimaryTextColor,
Checked = sliceSettingValue == "1"
};
checkBoxWidget.Click += (sender, e) =>
{
bool isChecked = ((CheckBox)sender).Checked;
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, isChecked ? "1" : "0", persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
dataArea.AddChild(checkBoxWidget);
settingsRow.ValueChanged = (text) =>
{
checkBoxWidget.Checked = text == "1";
};
}
break;
case SliceSettingData.DataEditTypes.STRING:
{
var stringEdit = new MHTextEditWidget(sliceSettingValue, pixelWidth: settingData.ShowAsOverride ? 120 : 200, tabIndex: tabIndexForItem++)
{
Name = settingData.PresentationName + " Edit",
};
stringEdit.ToolTipText = settingData.HelpText;
stringEdit.ActualTextEditWidget.EditComplete += (sender, e) =>
{
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, ((TextEditWidget)sender).Text, persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
dataArea.AddChild(stringEdit);
settingsRow.ValueChanged = (text) =>
{
stringEdit.Text = text;
};
}
break;
case SliceSettingData.DataEditTypes.MULTI_LINE_TEXT:
{
string convertedNewLines = sliceSettingValue.Replace("\\n", "\n");
var stringEdit = new MHTextEditWidget(convertedNewLines, pixelWidth: 320, pixelHeight: multiLineEditHeight, multiLine: true, tabIndex: tabIndexForItem++, typeFace: ApplicationController.MonoSpacedTypeFace)
{
HAnchor = HAnchor.ParentLeftRight,
};
stringEdit.ActualTextEditWidget.EditComplete += (sender, e) =>
{
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, ((TextEditWidget)sender).Text.Replace("\n", "\\n"), persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
nameArea.HAnchor = HAnchor.AbsolutePosition;
nameArea.Width = 0;
dataArea.AddChild(stringEdit);
dataArea.HAnchor = HAnchor.ParentLeftRight;
settingsRow.ValueChanged = (text) =>
{
stringEdit.Text = text.Replace("\\n", "\n");
};
}
break;
case SliceSettingData.DataEditTypes.COM_PORT:
{
#if __ANDROID__
addControl = false;
#endif
// The COM_PORT control is unique in its approach to the SlicerConfigName. It uses "com_port" settings name to
// bind to a context that will place it in the SliceSetting view but it binds its values to a machine
// specific dictionary key that is not exposed in the UI. At runtime we lookup and store to '<machinename>_com_port'
// ensuring that a single printer can be shared across different devices and we'll select the correct com port in each case
var selectableOptions = new DropDownList("None", maxHeight: 200)
{
ToolTipText = settingData.HelpText,
Margin = new BorderDouble(),
Name = "Com Port Dropdown"
};
selectableOptions.Click += (s, e) =>
{
AddComMenuItems(settingData, persistenceLayer, settingsRow, selectableOptions);
};
AddComMenuItems(settingData, persistenceLayer, settingsRow, selectableOptions);
dataArea.AddChild(selectableOptions);
settingsRow.ValueChanged = (text) =>
{
// Lookup the machine specific comport value rather than the passed in text value
selectableOptions.SelectedLabel = ActiveSliceSettings.Instance.Helpers.ComPort();
};
}
break;
case SliceSettingData.DataEditTypes.LIST:
{
var selectableOptions = new DropDownList("None", maxHeight: 200)
{
ToolTipText = settingData.HelpText,
Margin = new BorderDouble()
};
foreach (string listItem in settingData.ExtraSettings.Split(','))
{
MenuItem newItem = selectableOptions.AddItem(listItem);
if (newItem.Text == sliceSettingValue)
{
selectableOptions.SelectedLabel = sliceSettingValue;
}
newItem.Selected += (sender, e) =>
{
MenuItem menuItem = ((MenuItem)sender);
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, menuItem.Text, persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
}
dataArea.AddChild(selectableOptions);
settingsRow.ValueChanged = (text) =>
{
selectableOptions.SelectedLabel = text;
};
}
break;
case SliceSettingData.DataEditTypes.HARDWARE_PRESENT:
{
var checkBoxWidget = new CheckBox("")
{
Name = settingData.PresentationName + " Checkbox",
ToolTipText = settingData.HelpText,
VAnchor = Agg.UI.VAnchor.ParentBottom,
TextColor = ActiveTheme.Instance.PrimaryTextColor,
Checked = sliceSettingValue == "1"
};
checkBoxWidget.Click += (sender, e) =>
{
bool isChecked = ((CheckBox)sender).Checked;
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, isChecked ? "1" : "0", persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
dataArea.AddChild(checkBoxWidget);
settingsRow.ValueChanged = (text) =>
{
checkBoxWidget.Checked = text == "1";
};
}
break;
case SliceSettingData.DataEditTypes.VECTOR2:
{
string[] xyValueStrings = sliceSettingValue.Split(',');
if (xyValueStrings.Length != 2)
{
xyValueStrings = new string[] { "0", "0" };
}
double currentXValue;
double.TryParse(xyValueStrings[0], out currentXValue);
var xEditWidget = new MHNumberEdit(currentXValue, allowDecimals: true, pixelWidth: vectorXYEditWidth, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
SelectAllOnFocus = true
};
double currentYValue;
double.TryParse(xyValueStrings[1], out currentYValue);
var yEditWidget = new MHNumberEdit(currentYValue, allowDecimals: true, pixelWidth: vectorXYEditWidth, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
SelectAllOnFocus = true,
Margin = new BorderDouble(20, 0, 0, 0),
};
xEditWidget.ActuallNumberEdit.EditComplete += (sender, e) =>
{
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, xEditWidget.ActuallNumberEdit.Value.ToString() + "," + yEditWidget.ActuallNumberEdit.Value.ToString(), persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
dataArea.AddChild(xEditWidget);
dataArea.AddChild(new TextWidget("X", pointSize: 10, textColor: ActiveTheme.Instance.PrimaryTextColor)
{
VAnchor = VAnchor.ParentCenter,
Margin = new BorderDouble(5, 0),
});
yEditWidget.ActuallNumberEdit.EditComplete += (sender, e) =>
{
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, xEditWidget.ActuallNumberEdit.Value.ToString() + "," + yEditWidget.ActuallNumberEdit.Value.ToString(), persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
dataArea.AddChild(yEditWidget);
var yLabel = new GuiWidget(HAnchor.ParentLeftRight, VAnchor.FitToChildren | VAnchor.ParentCenter)
{
Padding = new BorderDouble(5, 0),
HAnchor = HAnchor.ParentLeftRight,
};
yLabel.AddChild(new WrappedTextWidget("Y", pointSize: 9, textColor: ActiveTheme.Instance.PrimaryTextColor));
unitsArea.AddChild(yLabel);
settingsRow.ValueChanged = (text) =>
{
double currentValue2;
string[] xyValueStrings2 = text.Split(',');
if (xyValueStrings2.Length != 2)
{
xyValueStrings2 = new string[] { "0", "0" };
}
double.TryParse(xyValueStrings2[0], out currentValue2);
xEditWidget.ActuallNumberEdit.Value = currentValue2;
double.TryParse(xyValueStrings2[1], out currentValue2);
yEditWidget.ActuallNumberEdit.Value = currentValue2;
};
}
break;
case SliceSettingData.DataEditTypes.OFFSET2:
{
Vector2 offset = ActiveSliceSettings.Instance.Helpers.ExtruderOffset(extruderIndex);
var xEditWidget = new MHNumberEdit(offset.x, allowDecimals: true, allowNegatives: true, pixelWidth: vectorXYEditWidth, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
SelectAllOnFocus = true,
};
var yEditWidget = new MHNumberEdit(offset.y, allowDecimals: true, allowNegatives: true, pixelWidth: vectorXYEditWidth, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
SelectAllOnFocus = true,
Margin = new BorderDouble(20, 0, 0, 0),
};
xEditWidget.ActuallNumberEdit.EditComplete += (sender, e) =>
{
int extruderIndexLocal = extruderIndex;
SaveCommaSeparatedIndexSetting(extruderIndexLocal, layerCascade, settingData.SlicerConfigName, xEditWidget.ActuallNumberEdit.Value.ToString() + "x" + yEditWidget.ActuallNumberEdit.Value.ToString(), persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
dataArea.AddChild(xEditWidget);
dataArea.AddChild(new TextWidget("X", pointSize: 10, textColor: ActiveTheme.Instance.PrimaryTextColor)
{
VAnchor = VAnchor.ParentCenter,
Margin = new BorderDouble(5, 0),
});
yEditWidget.ActuallNumberEdit.EditComplete += (sender, e) =>
{
int extruderIndexLocal = extruderIndex;
SaveCommaSeparatedIndexSetting(extruderIndexLocal, layerCascade, settingData.SlicerConfigName, xEditWidget.ActuallNumberEdit.Value.ToString() + "x" + yEditWidget.ActuallNumberEdit.Value.ToString(), persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
dataArea.AddChild(yEditWidget);
var yLabel = new GuiWidget(HAnchor.ParentLeftRight, VAnchor.FitToChildren | VAnchor.ParentCenter)
{
Padding = new BorderDouble(5, 0),
HAnchor = HAnchor.ParentLeftRight,
};
yLabel.AddChild(new WrappedTextWidget("Y", pointSize: 9, textColor: ActiveTheme.Instance.PrimaryTextColor));
unitsArea.AddChild(yLabel);
settingsRow.ValueChanged = (text) =>
{
Vector2 offset2 = ActiveSliceSettings.Instance.Helpers.ExtruderOffset(extruderIndex);
xEditWidget.ActuallNumberEdit.Value = offset2.x;
yEditWidget.ActuallNumberEdit.Value = offset2.y;
};
}
break;
default:
var missingSetting = new TextWidget(String.Format("Missing the setting for '{0}'.", settingData.DataEditType.ToString()))
{
TextColor = ActiveTheme.Instance.PrimaryTextColor,
BackgroundColor = RGBA_Bytes.Red
};
dataArea.AddChild(missingSetting);
break;
}
}
container.HAnchor = HAnchor.ParentLeftRight;
container.VAnchor = VAnchor.FitToChildren;
Button restoreButton = null;
if (settingData.ShowAsOverride)
{
restoreButton = new Button(new ButtonViewStates(new ImageWidget(restoreNormal), new ImageWidget(restoreHover), new ImageWidget(restorePressed), new ImageWidget(restoreNormal)))
{
Name = "Restore " + settingData.SlicerConfigName,
VAnchor = VAnchor.ParentCenter,
Margin = new BorderDouble(0, 0, 5, 0),
ToolTipText = "Restore Default".Localize()
};
restoreButton.Click += (sender, e) =>
{
// Revert the user override
if (persistenceLayer == null)
{
ActiveSliceSettings.Instance.ClearValue(settingData.SlicerConfigName);
}
else
{
ActiveSliceSettings.Instance.ClearValue(settingData.SlicerConfigName, persistenceLayer);
}
settingsRow.RefreshValue(layerCascade);
OnSettingsChanged(settingData);
};
restoreArea.AddChild(restoreButton);
}
container.AddChild(settingsRow);
// Define the UpdateStyle implementation
settingsRow.UpdateStyle = () =>
{
if (persistenceLayer.ContainsKey(settingData.SlicerConfigName))
{
switch (viewFilter)
{
case NamedSettingsLayers.All:
if (settingData.ShowAsOverride)
{
settingsRow.BackgroundColor = userSettingBackgroundColor;
}
break;
case NamedSettingsLayers.Material:
settingsRow.BackgroundColor = materialSettingBackgroundColor;
break;
case NamedSettingsLayers.Quality:
settingsRow.BackgroundColor = qualitySettingBackgroundColor;
break;
}
if(restoreButton != null) restoreButton.Visible = true;
}
else if (layerCascade == null)
{
if (ActiveSliceSettings.Instance.SettingExistsInLayer(settingData.SlicerConfigName, NamedSettingsLayers.Material))
{
settingsRow.BackgroundColor = materialSettingBackgroundColor;
}
else if (ActiveSliceSettings.Instance.SettingExistsInLayer(settingData.SlicerConfigName, NamedSettingsLayers.Quality))
{
settingsRow.BackgroundColor = qualitySettingBackgroundColor;
}
else
{
settingsRow.BackgroundColor = RGBA_Bytes.Transparent;
}
if (restoreButton != null) restoreButton.Visible = false;
}
else
{
if (restoreButton != null) restoreButton.Visible = false;
settingsRow.BackgroundColor = RGBA_Bytes.Transparent;
}
};
// Invoke the UpdateStyle implementation
settingsRow.UpdateStyle();
return container;
}
private DropDownList CreateDropdown()
{
var dropDownList = new DropDownList(defaultMenuItemText, maxHeight: 300, useLeftIcons: true)
{
HAnchor = HAnchor.ParentLeftRight,
MenuItemsPadding = new BorderDouble(10, 4, 10, 6),
};
dropDownList.Margin = new BorderDouble(0, 3);
dropDownList.MinimumSize = new Vector2(dropDownList.LocalBounds.Width, dropDownList.LocalBounds.Height);
MenuItem defaultMenuItem = dropDownList.AddItem(defaultMenuItemText, "");
defaultMenuItem.Selected += MenuItem_Selected;
var listSource = (layerType == NamedSettingsLayers.Material) ? ActiveSliceSettings.Instance.MaterialLayers : ActiveSliceSettings.Instance.QualityLayers;
foreach (var layer in listSource)
{
MenuItem menuItem = dropDownList.AddItem(layer.Name, layer.LayerID);
menuItem.Selected += MenuItem_Selected;
}
MenuItem addNewPreset = dropDownList.AddItem(StaticData.Instance.LoadIcon("icon_plus.png", 32, 32), "Add New Setting...", "new");
addNewPreset.Selected += (s, e) =>
{
var newLayer = new PrinterSettingsLayer();
if (layerType == NamedSettingsLayers.Quality)
{
newLayer.Name = "Quality" + ActiveSliceSettings.Instance.QualityLayers.Count;
ActiveSliceSettings.Instance.QualityLayers.Add(newLayer);
ActiveSliceSettings.Instance.ActiveQualityKey = newLayer.LayerID;
}
else
{
newLayer.Name = "Material" + ActiveSliceSettings.Instance.MaterialLayers.Count;
ActiveSliceSettings.Instance.MaterialLayers.Add(newLayer);
ActiveSliceSettings.Instance.SetMaterialPreset(this.extruderIndex, newLayer.LayerID);
}
RebuildDropDownList();
editButton.ClickButton(new MouseEventArgs(MouseButtons.Left, 1, 0, 0, 0));
};
try
{
string settingsKey;
if (layerType == NamedSettingsLayers.Material)
{
settingsKey = ActiveSliceSettings.Instance.GetMaterialPresetKey(extruderIndex);
ActiveSliceSettings.Instance.MaterialLayers.CollectionChanged += SettingsLayers_CollectionChanged;
dropDownList.Closed += (s1, e1) =>
{
ActiveSliceSettings.Instance.MaterialLayers.CollectionChanged -= SettingsLayers_CollectionChanged;
};
}
else
{
settingsKey = ActiveSliceSettings.Instance.ActiveQualityKey;
ActiveSliceSettings.Instance.QualityLayers.CollectionChanged += SettingsLayers_CollectionChanged;
dropDownList.Closed += (s1, e1) =>
{
ActiveSliceSettings.Instance.QualityLayers.CollectionChanged -= SettingsLayers_CollectionChanged;
};
}
if (!string.IsNullOrEmpty(settingsKey))
{
dropDownList.SelectedValue = settingsKey;
}
}
catch (Exception ex)
{
GuiWidget.BreakInDebugger(ex.Message);
}
return dropDownList;
}
private GuiWidget CreateSliceSettingsWidget(PrinterSettingsLayer persistenceLayer)
{
var layerCascade = new List<PrinterSettingsLayer>
{
persistenceLayer,
ActiveSliceSettings.Instance.OemLayer,
ActiveSliceSettings.Instance.BaseLayer
};
var settingsWidget = new SliceSettingsWidget(layerCascade, presetsContext.LayerType);
settingsWidget.settingsControlBar.Visible = false;
return settingsWidget;
}
public SelectPartsOfPrinterToImport(string settingsFilePath, PrinterSettingsLayer destinationLayer, string sectionName = null) :
base(unlocalizedTextForTitle: "Import Wizard")
{
this.isMergeIntoUserLayer = destinationLayer == ActiveSliceSettings.Instance.UserLayer;
this.destinationLayer = destinationLayer;
this.sectionName = sectionName;
// TODO: Need to handle load failures for import attempts
settingsToImport = PrinterSettings.LoadFile(settingsFilePath);
this.headerLabel.Text = "Select What to Import".Localize();
this.settingsFilePath = settingsFilePath;
var scrollWindow = new ScrollableWidget()
{
AutoScroll = true,
HAnchor = HAnchor.ParentLeftRight,
VAnchor = VAnchor.ParentBottomTop,
};
scrollWindow.ScrollArea.HAnchor = HAnchor.ParentLeftRight;
contentRow.AddChild(scrollWindow);
var container = new FlowLayoutWidget(FlowDirection.TopToBottom)
{
HAnchor = HAnchor.ParentLeftRight,
};
scrollWindow.AddChild(container);
if (isMergeIntoUserLayer)
{
container.AddChild(new WrappedTextWidget(importMessage, textColor: ActiveTheme.Instance.PrimaryTextColor));
}
// add in the check boxes to select what to import
container.AddChild(new TextWidget("Main Settings:")
{
TextColor = ActiveTheme.Instance.PrimaryTextColor,
Margin = new BorderDouble(0, 3, 0, isMergeIntoUserLayer ? 10 : 0),
});
var mainProfileRadioButton = new RadioButton("Printer Profile")
{
TextColor = ActiveTheme.Instance.PrimaryTextColor,
Margin = new BorderDouble(5, 0),
HAnchor = HAnchor.ParentLeft,
Checked = true,
};
container.AddChild(mainProfileRadioButton);
if (settingsToImport.QualityLayers.Count > 0)
{
container.AddChild(new TextWidget("Quality Presets:")
{
TextColor = ActiveTheme.Instance.PrimaryTextColor,
Margin = new BorderDouble(0, 3, 0, 15),
});
int buttonIndex = 0;
foreach (var qualitySetting in settingsToImport.QualityLayers)
{
RadioButton qualityButton = new RadioButton(qualitySetting.Name)
{
TextColor = ActiveTheme.Instance.PrimaryTextColor,
Margin = new BorderDouble(5, 0, 0, 0),
HAnchor = HAnchor.ParentLeft,
};
container.AddChild(qualityButton);
int localButtonIndex = buttonIndex;
qualityButton.CheckedStateChanged += (s, e) =>
{
if (qualityButton.Checked)
{
selectedQuality = localButtonIndex;
}
else
{
selectedQuality = -1;
}
};
buttonIndex++;
}
}
if (settingsToImport.MaterialLayers.Count > 0)
{
container.AddChild(new TextWidget("Material Presets:")
{
TextColor = ActiveTheme.Instance.PrimaryTextColor,
Margin = new BorderDouble(0, 3, 0, 15),
});
int buttonIndex = 0;
foreach (var materialSetting in settingsToImport.MaterialLayers)
{
RadioButton materialButton = new RadioButton(materialSetting.Name)
{
TextColor = ActiveTheme.Instance.PrimaryTextColor,
Margin = new BorderDouble(5, 0),
HAnchor = HAnchor.ParentLeft,
};
container.AddChild(materialButton);
int localButtonIndex = buttonIndex;
materialButton.CheckedStateChanged += (s, e) =>
{
if (materialButton.Checked)
{
selectedMaterial = localButtonIndex;
}
else
{
selectedMaterial = -1;
}
};
buttonIndex++;
}
}
var mergeButtonTitle = this.isMergeIntoUserLayer ? "Merge".Localize() : "Import".Localize();
var mergeButton = textImageButtonFactory.Generate(mergeButtonTitle);
mergeButton.Name = "Merge Profile";
mergeButton.Click += (s, e) => UiThread.RunOnIdle(() =>
{
bool copyName = false;
PrinterSettingsLayer sourceLayer = null;
if (selectedMaterial > -1)
{
sourceLayer = settingsToImport.MaterialLayers[selectedMaterial];
copyName = true;
}
else if (selectedQuality > -1)
{
sourceLayer = settingsToImport.QualityLayers[selectedQuality];
copyName = true;
}
List<PrinterSettingsLayer> sourceFilter;
if (selectedQuality == -1 && selectedMaterial == -1)
{
sourceFilter = new List<PrinterSettingsLayer>()
{
settingsToImport.OemLayer,
settingsToImport.UserLayer
};
}
else
{
sourceFilter = new List<PrinterSettingsLayer>()
{
sourceLayer
};
}
ActiveSliceSettings.Instance.Merge(destinationLayer, settingsToImport, sourceFilter, copyName);
this.Parents<SystemWindow>().FirstOrDefault()?.CloseOnIdle();
});
footerRow.AddChild(mergeButton);
footerRow.AddChild(new HorizontalSpacer());
footerRow.AddChild(cancelButton);
if (settingsToImport.QualityLayers.Count == 0 && settingsToImport.MaterialLayers.Count == 0)
{
// Only main setting so don't ask what to merge just do it.
UiThread.RunOnIdle(() =>
{
var sourceFilter = new List<PrinterSettingsLayer>()
{
settingsToImport.OemLayer ?? new PrinterSettingsLayer(),
settingsToImport.UserLayer ?? new PrinterSettingsLayer()
};
ActiveSliceSettings.Instance.Merge(destinationLayer, settingsToImport, sourceFilter, false);
UiThread.RunOnIdle(ApplicationController.Instance.ReloadAdvancedControlsPanel);
string successMessage = importPrinterSuccessMessage.FormatWith(Path.GetFileNameWithoutExtension(settingsFilePath));
if (!isMergeIntoUserLayer)
{
string sourceName = isMergeIntoUserLayer ? Path.GetFileNameWithoutExtension(settingsFilePath) : destinationLayer[SettingsKey.layer_name];
successMessage = ImportSettingsPage.importSettingSuccessMessage.FormatWith(sourceName, sectionName);
}
WizardWindow.ChangeToPage(new ImportSucceeded(successMessage)
{
WizardWindow = this.WizardWindow,
});
});
}
}
private static GuiWidget CreateQuickMenu(SliceSettingData settingData, PrinterSettingsLayer persistenceLayer, GuiWidget content, InternalTextEditWidget internalTextWidget, List<PrinterSettingsLayer> layerCascade)
{
string sliceSettingValue = GetActiveValue(settingData.SlicerConfigName, layerCascade);
FlowLayoutWidget totalContent = new FlowLayoutWidget();
DropDownList selectableOptions = new DropDownList("Custom", maxHeight: 200);
selectableOptions.Margin = new BorderDouble(0, 0, 10, 0);
foreach (QuickMenuNameValue nameValue in settingData.QuickMenuSettings)
{
string valueLocal = nameValue.Value;
MenuItem newItem = selectableOptions.AddItem(nameValue.MenuName);
if (sliceSettingValue == valueLocal)
{
selectableOptions.SelectedLabel = nameValue.MenuName;
}
newItem.Selected += (sender, e) =>
{
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, valueLocal, persistenceLayer);
OnSettingsChanged(settingData);
internalTextWidget.Text = valueLocal;
internalTextWidget.OnEditComplete(null);
};
}
// put in the custom menu to allow direct editing
MenuItem customMenueItem = selectableOptions.AddItem("Custom");
totalContent.AddChild(selectableOptions);
content.VAnchor = VAnchor.ParentCenter;
totalContent.AddChild(content);
EventHandler localUnregisterEvents = null;
SettingChanged.RegisterEvent((sender, e) =>
{
bool foundSetting = false;
foreach (QuickMenuNameValue nameValue in settingData.QuickMenuSettings)
{
string localName = nameValue.MenuName;
string newSliceSettingValue = GetActiveValue(settingData.SlicerConfigName, layerCascade);
if (newSliceSettingValue == nameValue.Value)
{
selectableOptions.SelectedLabel = localName;
foundSetting = true;
break;
}
}
if (!foundSetting)
{
selectableOptions.SelectedLabel = "Custom";
}
}, ref localUnregisterEvents);
totalContent.Closed += (s, e) =>
{
localUnregisterEvents?.Invoke(s, e);
};
return totalContent;
}
public void ClearValue(string sliceSetting, PrinterSettingsLayer persistenceLayer = null)
{
layeredProfile.ClearValue(sliceSetting, persistenceLayer);
}
public OemProfile(Dictionary <string, string> settingsDictionary)
{
OemLayer = new PrinterSettingsLayer(settingsDictionary);
}
private void ImportToPreset(string settingsFilePath)
{
if (!string.IsNullOrEmpty(settingsFilePath) && File.Exists(settingsFilePath))
{
PrinterSettingsLayer newLayer;
string sectionName = (newMaterialPresetButton.Checked) ? "Material".Localize() : "Quality".Localize();
string importType = Path.GetExtension(settingsFilePath).ToLower();
switch (importType)
{
case ProfileManager.ProfileExtension:
newLayer = new PrinterSettingsLayer();
newLayer[SettingsKey.layer_name] = Path.GetFileNameWithoutExtension(settingsFilePath);
if (newQualityPresetButton.Checked)
{
ActiveSliceSettings.Instance.QualityLayers.Add(newLayer);
}
else
{
// newMaterialPresetButton.Checked
ActiveSliceSettings.Instance.MaterialLayers.Add(newLayer);
}
// open a wizard to ask what to import to the preset
WizardWindow.ChangeToPage(new SelectPartsOfPrinterToImport(settingsFilePath, newLayer, sectionName));
break;
case ".slice": // legacy presets file extension
case ".ini":
var settingsToImport = PrinterSettingsLayer.LoadFromIni(settingsFilePath);
bool containsValidSetting = false;
{
newLayer = new PrinterSettingsLayer();
newLayer.Name = Path.GetFileNameWithoutExtension(settingsFilePath);
// Only be the base and oem layers (not the user, quality or material layer)
var baseAndOEMCascade = new List<PrinterSettingsLayer>
{
ActiveSliceSettings.Instance.OemLayer,
ActiveSliceSettings.Instance.BaseLayer
};
foreach (var keyName in PrinterSettings.KnownSettings)
{
if (ActiveSliceSettings.Instance.Contains(keyName))
{
containsValidSetting = true;
string currentValue = ActiveSliceSettings.Instance.GetValue(keyName, baseAndOEMCascade).Trim();
string newValue;
// Compare the value to import to the layer cascade value and only set if different
if (settingsToImport.TryGetValue(keyName, out newValue)
&& currentValue != newValue)
{
newLayer[keyName] = newValue;
}
}
}
if (containsValidSetting)
{
if (newMaterialPresetButton.Checked)
{
ActiveSliceSettings.Instance.MaterialLayers.Add(newLayer);
}
else
{
ActiveSliceSettings.Instance.QualityLayers.Add(newLayer);
}
ActiveSliceSettings.Instance.Save();
WizardWindow.ChangeToPage(new ImportSucceeded(importSettingSuccessMessage.FormatWith(Path.GetFileNameWithoutExtension(settingsFilePath), sectionName))
{
WizardWindow = this.WizardWindow,
});
}
else
{
displayFailedToImportMessage(settingsFilePath);
}
}
break;
default:
// Did not figure out what this file is, let the user know we don't understand it
StyledMessageBox.ShowMessageBox(null, "Oops! Unable to recognize settings file '{0}'.".Localize().FormatWith(Path.GetFileName(settingsFilePath)), "Unable to Import".Localize());
break;
}
}
Invalidate();
}
public void layerHeightLessThanNozzleDiameter(PrinterSettings printerSettings, PrinterSettingsLayer layer, string sourceFile)
{
string layerHeight;
if (!layer.TryGetValue(SettingsKey.layer_height, out layerHeight))
{
return;
}
float convertedLayerHeight = float.Parse(layerHeight);
string nozzleDiameter = printerSettings.GetValue(SettingsKey.nozzle_diameter);
float convertedNozzleDiameterValue = float.Parse(nozzleDiameter);
Assert.LessOrEqual(convertedLayerHeight, convertedNozzleDiameterValue, "Unexpected layerHeightLessThanNozzleDiameter value: " + sourceFile);
}
public void firstLayerExtrusionWidthNotZero(PrinterSettingsLayer layer, string sourceFile)
{
string firstLayerExtrusionWidth;
if (!layer.TryGetValue(SettingsKey.first_layer_extrusion_width, out firstLayerExtrusionWidth))
{
return;
}
float convertedFirstLayerExtrusionWidth;
if(firstLayerExtrusionWidth.Contains("%"))
{
string reformatFirstLayerExtrusionWidth = firstLayerExtrusionWidth.Replace("%", " ");
convertedFirstLayerExtrusionWidth = float.Parse(reformatFirstLayerExtrusionWidth);
}
else
{
convertedFirstLayerExtrusionWidth = float.Parse(firstLayerExtrusionWidth);
}
Assert.AreNotEqual(0, convertedFirstLayerExtrusionWidth, "Unexpected firstLayerExtrusionWidthNotZero value: " + sourceFile);
}
public static PrinterSettingsLayer LoadFromIni(string filePath)
{
var settings = from line in File.ReadAllLines(filePath)
let segments = line.Split('=')
where !line.StartsWith("#") && !string.IsNullOrEmpty(line) && segments.Length == 2
select new
{
Key = segments[0].Trim(),
Value = segments[1].Trim()
};
var layer = new PrinterSettingsLayer();
foreach (var setting in settings)
{
layer[setting.Key] = setting.Value;
}
return layer;
}
public void printCenterFormatSeparatedByComma(PrinterSettingsLayer layer, string sourceFile)
{
string settingValue;
if (!layer.TryGetValue(SettingsKey.print_center, out settingValue))
{
return;
}
string[] settingValueToTest = settingValue.Split(new[] { ',' }, StringSplitOptions.RemoveEmptyEntries);
Assert.AreEqual(2, settingValueToTest.Length, "print_center should have two values separated by a comma: " + sourceFile);
}
private DropDownList CreateDropdown()
{
var dropDownList = new MHDropDownList(defaultMenuItemText, theme, maxHeight: 300, useLeftIcons: true)
{
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Center,
MenuItemsPadding = new BorderDouble(10, 7, 7, 7),
};
dropDownList.Name = layerType.ToString() + " DropDown List";
dropDownList.Margin = 0;
dropDownList.MinimumSize = new Vector2(dropDownList.LocalBounds.Width, dropDownList.LocalBounds.Height);
MenuItem defaultMenuItem = dropDownList.AddItem(defaultMenuItemText, "");
defaultMenuItem.Selected += MenuItem_Selected;
var listSource = (layerType == NamedSettingsLayers.Material) ? printer.Settings.MaterialLayers : printer.Settings.QualityLayers;
foreach (var layer in listSource.OrderBy(l => l.Name))
{
MenuItem menuItem = dropDownList.AddItem(layer.Name, layer.LayerID);
menuItem.Name = layer.Name + " Menu";
menuItem.Selected += MenuItem_Selected;
}
MenuItem addNewPreset = dropDownList.AddItem(
AggContext.StaticData.LoadIcon("icon_plus.png", 16, 16),
"Add New Setting".Localize() + "...",
"new",
pointSize: theme.DefaultFontSize);
addNewPreset.Selected += (s, e) =>
{
var newLayer = new PrinterSettingsLayer();
if (layerType == NamedSettingsLayers.Quality)
{
newLayer.Name = "Quality" + printer.Settings.QualityLayers.Count;
printer.Settings.QualityLayers.Add(newLayer);
printer.Settings.ActiveQualityKey = newLayer.LayerID;
}
else
{
newLayer.Name = "Material" + printer.Settings.MaterialLayers.Count;
printer.Settings.MaterialLayers.Add(newLayer);
printer.Settings.ActiveMaterialKey = newLayer.LayerID;
}
RebuildDropDownList();
editButton.OnClick(new MouseEventArgs(MouseButtons.Left, 1, 0, 0, 0));
};
try
{
string settingsKey;
if (layerType == NamedSettingsLayers.Material)
{
if (extruderIndex == 0)
{
settingsKey = printer.Settings.ActiveMaterialKey;
}
else // try to find the right material based on the extruders temperature
{
settingsKey = null;
var extruderTemp = printer.Settings.GetValue <double>(SettingsKey.temperature1).ToString();
foreach (var materialLayer in printer.Settings.MaterialLayers)
{
if (materialLayer.TryGetValue(SettingsKey.temperature, out string _temp))
{
if (_temp == extruderTemp)
{
settingsKey = materialLayer.LayerID;
}
}
}
}
}
else
{
settingsKey = printer.Settings.ActiveQualityKey;
}
if (!string.IsNullOrEmpty(settingsKey))
{
dropDownList.SelectedValue = settingsKey;
}
}
catch (Exception ex)
{
GuiWidget.BreakInDebugger(ex.Message);
}
return(dropDownList);
}
public void testRetractLengthLessThanTwenty(PrinterSettingsLayer layer, string sourceFile)
{
string settingValue;
if (!layer.TryGetValue("retract_length", out settingValue))
{
return;
}
Assert.Less(float.Parse(settingValue, CultureInfo.InvariantCulture.NumberFormat), 20, "retract_length should be less than 20: " + sourceFile);
}
public void SetComPort(string port, PrinterSettingsLayer layer)
{
printerSettings.SetValue($"{Environment.MachineName}_com_port", port, layer);
}
public void testExtruderCountGreaterThanZero(PrinterSettingsLayer layer, string sourceFile)
{
string settingValue;
if (!layer.TryGetValue("extruder_count", out settingValue))
{
return;
}
Assert.Greater(int.Parse(settingValue), 0, "extruder_count should be greater than zero: " + sourceFile);
}
