public GUISettings(Blackboard blackboard, string bbConfigFile)
: this()
{
if(blackboard == null)
throw new ArgumentNullException();
this.verbosityLevel = blackboard.VerbosityLevel;
this.conigurationFileName = bbConfigFile;
}
public Kernel(Blackboard blk)
{
this.blackboard = blk;
this.procMan = new ModuleProcessManager((Robotics.Utilities.LogWriter)blackboard.Log);
this.commands = new Dictionary<string, StringEventHandler>();
this.tracers = new Dictionary<string, SharedVariableWrittenEventHandler>();
this.rxCommandSplitter = new Regex(@"^(?<cmd>\w+)(\s+(?<par>.*))?$");
RegisterCommands();
RegisterSystemPrototypes();
}
public ConsoleManager(Blackboard blk, Kernel kernel, ConsoleLogWriter log)
{
this.kernel = kernel;
this.blackboard = blk;
this.log = log;
this.currentLine = String.Empty;
this.tabSw = new Stopwatch();
this.firstTab = false;
this.history = new CommandHistoryManager();
this.completionTree = new CompletionTree();
this.kernel.ConsoleManager = this;
this.kernel.FillCompletionTree(this.completionTree);
}
/// <summary>
/// Fetch the blackboard test time out
/// </summary>
/// <param name="doc">XML document which contains the Blackboard data</param>
/// <param name="blackboard">The blackboard which data will be set</param>
/// <param name="log">The log writer</param>
private static void LoadBlackboardTestTimeOut(XmlDocument doc, Blackboard blackboard, ILogWriter log)
{
string sTime;
int iTime;
TimeSpan time;
if (doc.GetElementsByTagName("testTimeOut").Count == 1)
{
sTime = doc.GetElementsByTagName("testTimeOut")[0].InnerText.Trim();
if (Int32.TryParse(sTime, out iTime) && (iTime > 0))
{
blackboard.TestTimeOut = new TimeSpan(0, 0, iTime);
log.WriteLine(1, "Blackboard Test Timeout: " + blackboard.TestTimeOut);
}
else if (TimeSpan.TryParse(sTime, out time) && (time > TimeSpan.Zero))
{
blackboard.TestTimeOut = time;
log.WriteLine(1, "Blackboard Test Timeout: " + time);
}
else log.WriteLine(1, "Blackboard Test Timeout disabled");
}
else log.WriteLine(1, "Blackboard Test Timeout disabled");
}
/// <summary>
/// Loads the Blackboard from the config file
/// </summary>
/// <returns>true if the Blackboard was leaded successfully, false otherwise</returns>
private bool LoadBlackboard()
{
FileInfo fi;
try
{
fi = new FileInfo(this.configFile);
this.configFile = fi.FullName;
SetupLogfile();
log.WriteLine("Loading Blackboard");
this.blackboard = Blackboard.FromXML(this.configFile, log);
this.blackboard.StartupSequence.Method = Blk.Engine.Remote.ModuleStartupMethod.None;
blackboard.VerbosityLevel = 1;
SetupBlackboardModules();
log.WriteLine("Blackboard loaded");
}
catch (Exception ex)
{
log.WriteLine("Error loading blackboard");
log.WriteLine("\t" + ex.Message.Replace("\n", "\n\t"));
return false;
}
return true;
}
/// <summary>
/// Converts the string representation of a command to a Command object.
/// A return value indicates whether the conversion succeded or not.
/// </summary>
/// <param name="s">A string containing the command to convert</param>
/// <param name="blackboard">A blackboard which contains all information about modules</param>
/// <param name="cmd">When this method returns, contains the Command equivalent to the command
/// contained in s, if the conversion succeeded, or null if the conversion failed.
/// The conversion fails if the s parameter is a null reference (Nothing in Visual Basic) or is not of the correct format.
/// This parameter is passed uninitialized</param>
/// <param name="ex">When this method returns, contains the Exception generated during the parse operation,
/// if the conversion failed, or null if the conversion succeeded. The conversion fails if the s parameter
/// is a null reference (Nothing in Visual Basic) or is not of the correct format.
/// This parameter is passed uninitialized</param>
/// <returns>true if conversion was successfull, false otherwise</returns>
protected static bool TryParse(string s, Blackboard blackboard, out Command cmd, out Exception ex)
{
Regex rx;
Match m;
Prototype proto;
//Module source;
//Module destination;
IModule source;
IModule destination;
string sCommand;
string sParams;
string sSrc;
string sDest;
string sId;
int id;
cmd = null;
ex = null;
// Regular Expresion Generation
//rx = new Regex(@"((?<src>[\w\-]+)(\s+(?<dest>[\w\-]+))?\s+)?(?<cmd>[A-Za-z_]+)\s+(""(?<params>[^""]*)"")?\s+(@(?<id>\d+))?");
rx = rxCommandFromBlackboard;
m = rx.Match(s);
// Check if input string matchs Regular Expression
if (!m.Success)
{
ex = new ArgumentException("Invalid String", "s");
return false;
}
// Extract Data
sCommand = m.Result("${cmd}").ToLower();
sParams = m.Result("${params}");
sId = m.Result("${id}");
sSrc = m.Result("${src}");
sDest = m.Result("${dest}");
if ((sId == null) || (sId.Length < 1)) id = -1;
else id = Int32.Parse(sId);
// Check if source module is specified
if ((sSrc == null) || (sSrc.Length < 1) || !blackboard.Modules.Contains(sSrc))
{
ex = new Exception("No source module found for command provided");
return false;
}
source = blackboard.Modules[sSrc];
// Browse for destination module and prototype
if (!blackboard.FindDestinationModule(sCommand, out destination, out proto))
//throw new Exception("No destination module found for command provided");
{
// No destination module found. Must check if destination is availiable
if ((sDest == null) || (sDest.Length < 1) || !blackboard.Modules.Contains(sDest))
{
ex = new Exception("No destination module found for command provided");
return false;
}
destination = blackboard.Modules[sDest];
proto = null;
}
// Check if command matchs a prototype
if ((proto != null) && proto.ParamsRequired && ((sParams == null) || (sParams.Length < 1)))
{
ex = new Exception("Invalid string. The Command requires parameters");
return false;
}
// Create the Command
cmd = new Command(source, destination, sCommand, sParams, id);
cmd.prototype = proto;
cmd.sentTime = DateTime.Now;
return true;
}
/// <summary>
/// Converts the string representation of a command to a Command object.
/// <param name="s">A string containing the command to convert</param>
/// <param name="blackboard">A blackboard which contains all information about modules</param>
/// </summary>
/// <returns>A command object that represents the command contained in s</returns>
public static Command Parse(string s, Blackboard blackboard)
{
Exception ex;
Command command;
if (!TryParse(s, blackboard, out command, out ex))
throw ex;
else return command;
}
/// <summary>
/// Adds a module to the blackboard
/// </summary>
private static void AddModuleToBlackboard(Blackboard blackboard, ILogWriter log, ModuleClient mod, SortedList<string, ModuleClient> disabledModules)
{
if (mod.Enabled)
{
blackboard.modules.Add(mod);
log.WriteLine(2, "Loading module complete!");
}
else
{
disabledModules.Add(mod.Name, mod);
log.WriteLine(2, "Disabled module enqueued!");
}
}
/// <summary>
/// Creates a blackboard from a XML configuration file
/// </summary>
/// <param name="path">The path of the XML configuration file</param>
/// <param name="log">Output Log</param>
/// <returns>The configured blackboard</returns>
public static Blackboard FromXML(string path, ILogWriter log)
{
#region Variables
Blackboard blackboard;
XmlDocument doc;
XmlDocument tmpDoc;
int clientModulesAddedd;
#endregion
blackboard = new Blackboard();
//if ((Log != null) && (Log != TextWriter.Null)) blackboard.Log = Log;
if (log != null) blackboard.Log = log;
else log = blackboard.Log;
log.VerbosityTreshold = blackboard.verbosity;
if (!File.Exists(path))
{
log.WriteLine(0, "File does not exist");
throw new FileLoadException("File does not exist");
}
doc = new XmlDocument();
doc.Load(path);
if (
(doc.GetElementsByTagName("blackboard").Count != 1) ||
(doc.GetElementsByTagName("configuration").Count != 1) ||
(doc.GetElementsByTagName("modules").Count < 1))
{
log.WriteLine(0, "Incorrect format");
throw new FileLoadException("Incorrect format");
}
LoadBlackboardConfiguration(blackboard, doc, log);
clientModulesAddedd = LoadBlackboardModules(blackboard, doc, log);
#region Move program start actions to be executed by the virtual module
foreach (ModuleClient mc in blackboard.modules)
{
if(mc == blackboard.virtualModule)
continue;
MoveActions(mc.RestartActions, blackboard.virtualModule.RestartActions);
MoveActions(mc.RestartTestActions, blackboard.virtualModule.RestartTestActions);
MoveActions(mc.StartupActions, blackboard.virtualModule.StartupActions);
MoveActions(mc.StopActions, blackboard.virtualModule.StopActions);
MoveActions(mc.TestTimeOutActions, blackboard.virtualModule.TestTimeOutActions);
}
#endregion
#region Load of shared variables
if (doc.GetElementsByTagName("sharedVariables").Count == 1)
{
tmpDoc = new XmlDocument();
tmpDoc.LoadXml(doc.GetElementsByTagName("sharedVariables")[0].OuterXml);
SetupSharedVariables(tmpDoc, blackboard);
}
#endregion
if (clientModulesAddedd < 1)
throw new Exception("No modules has been added");
log.WriteLine(0, "Load complete!");
return blackboard;
}
/// <summary>
/// Creates and configures the shared variables specified in the provided XML document for the specified blackboard
/// </summary>
/// <param name="doc">XML document which contains shared variables initialization data</param>
/// <param name="blackboard">Blackboard object in which the shared variables will be configured</param>
private static void SetupSharedVariables(XmlDocument doc, Blackboard blackboard)
{
if ((doc == null) || (blackboard == null))
throw new ArgumentNullException();
if (blackboard.virtualModule == null)
throw new Exception("Uninitialized blackboard");
int i, j;
ILogWriter log;
XmlDocument tmpDoc;
XmlNode node;
XmlNodeList xmlVarList;
XmlNodeList xmlWriterModuleList;
SharedVariable shVar;
List<string> writers;
string shVarName;
string shVarType;
string shVarValue;
bool shVarIsArray;
int bracketPos;
log = blackboard.log;
tmpDoc = new XmlDocument();
if (doc.GetElementsByTagName("sharedVariables").Count < 1)
{
log.WriteLine(1, "No shared variables was defined in XML file.");
return;
}
tmpDoc.LoadXml(doc.GetElementsByTagName("sharedVariables")[0].OuterXml);
#region Load of shared variables
// Load of shared variables
log.WriteLine(1, "Reading shared variables");
xmlVarList = tmpDoc.GetElementsByTagName("var");
for (i = 0; i < xmlVarList.Count; ++i)
{
#region Get variable Name
node = xmlVarList[i];
if ((node == null) || (node.Name != "var") || (node.Attributes["name"] == null))
continue;
shVarName = node.Attributes["name"].InnerText;
shVarType = (node.Attributes["type"] != null) ? node.Attributes["type"].InnerText : "var";
if (String.IsNullOrEmpty(shVarType) || !SharedVariable.RxVarTypeValidator.IsMatch(shVarType))
shVarType = "var";
bracketPos = shVarType.IndexOf("[");
if (shVarIsArray = (bracketPos != -1))
shVarType = shVarType.Remove(bracketPos);
if (blackboard.VirtualModule.SharedVariables.Contains(shVarName))
{
log.WriteLine(2, "Error loading shared variable " + shVarName + ". Variable already exists.");
continue;
}
#endregion
#region Get variable initial value
shVarValue = "";
if (node.Attributes["value"] != null)
{
shVarValue = node.Attributes["value"].Value;
}
else if (node.Attributes["fromFile"] != null)
{
shVarValue = node.Attributes["fromFile"].Value;
if (File.Exists(shVarValue))
{
try
{
shVarValue = File.ReadAllText(shVarValue);
}
catch
{
log.WriteLine(2, "Error loading variable content from file " + shVarValue + " for the shared variable " + shVarName + ". Variable was set to null");
shVarValue = "";
}
}
}
#endregion
#region Get list of modules with write permission
writers = new List<string>();
tmpDoc = new XmlDocument();
tmpDoc.LoadXml(node.OuterXml);
xmlWriterModuleList = tmpDoc.GetElementsByTagName("writers");
if (xmlWriterModuleList.Count == 1)
{
writers.Add(blackboard.VirtualModule.Name);
tmpDoc = new XmlDocument();
tmpDoc.LoadXml(xmlWriterModuleList[0].OuterXml);
xmlWriterModuleList = tmpDoc.GetElementsByTagName("writer");
for (j = 0; j < xmlWriterModuleList.Count; ++j)
{
node = xmlWriterModuleList[j];
if (node.InnerText == "*")
{
writers.Clear();
writers.Add("*");
break;
}
if (!blackboard.modules.Contains(node.InnerText))
continue;
else
writers.Add(node.InnerText);
/*
if (!writers.Contains(node.InnerText))
writers.Add(node.InnerText);
*/
}
}
else
writers.Add("*");
#endregion
#region Create and add the shared variable
shVar = new SharedVariable(blackboard.VirtualModule, shVarType, shVarName, shVarIsArray, -1);
//shVar.Data = shVarValue;
shVar.WriteStringData(blackboard.VirtualModule, shVarType, -1, shVarValue);
writers.Sort();
shVar.AllowedWriters = writers;
blackboard.VirtualModule.SharedVariables.Add(shVar);
log.WriteLine(4, "Added shared variable " + shVarType +" "+ shVarName);
#endregion
}
#endregion
}
/// <summary>
/// Converts the string representation of a response to a Response object.
/// A return value indicates whether the conversion succeded or not.
/// <param name="s">A string containing the response to convert</param>
/// <param name="blackboard">A blackboard which contains all information about modules</param>
/// <param name="result">When this method returns, contains the Response equivalent to the response
/// contained in s, if the conversion succeeded, or null if the conversion failed.
/// The conversion fails if the s parameter is a null reference (Nothing in Visual Basic) or is not of the correct format.
/// This parameter is passed uninitialized</param>
/// </summary>
/// <returns>true if conversion was successfull, false otherwise</returns>
public static bool TryParse(string s, Blackboard blackboard, out Response result)
{
Exception ex;
return TryParse(s, blackboard, out result, out ex);
}
/// <summary>
/// Converts the string representation of a response to a Response object.
/// <param name="s">A string containing the response to convert</param>
/// <param name="blackboard">A blackboard which contains all information about modules</param>
/// </summary>
/// <returns>A response object that represents the response contained in s</returns>
public static Response Parse(string s, Blackboard blackboard)
{
Exception ex;
Response response;
if (!TryParse(s, blackboard, out response, out ex))
throw ex;
else return response;
}
/// <summary>
/// Initializes a new instance of BlackboardConfig
/// </summary>
public BlackboardWrapper(Blackboard blackboard)
{
this.blackboard = blackboard;
}
/// <summary>
/// Initializes a new instance of BlackboardConfig
/// </summary>
public BlackboardWrapper()
{
this.blackboard = null;
}
private void SetupBlackboard()
{
SetupLogfile();
tbsw = new XmlTextBoxStreamWriter(txtOutputLog, bbLogFile, 1024);
tbsw.AppendDate = true;
log = new LogWriter(tbsw);
processManager = new ModuleProcessManager(log);
txtOutputLog.Clear();
lvwRedirectionHistory.Items.Clear();
txtOutputLog.AppendText("Loading Blackboard\r\n");
blackboard = Blackboard.FromXML(ConfigFile, log);
blackboard.VerbosityLevel = 1;
//blackboard = Blackboard.FromXML("bb.xml");
LoadPlugins();
interactionTool.Blackboard = blackboard;
SetupBlackboardModules();
SetupBlackboardEvents();
//tcLog.Enabled = true;
BlackboardControlsEnabled = true;
txtOutputLog.AppendText("Blackboard loaded\r\n");
if(chkAutostart.Checked)
Start();
}
private static bool LoadModule(Blackboard blackboard, XmlNode modules, ILogWriter log, SortedList<string, ModuleClient> disabledModules)
{
XmlNode node;
string moduleName;
bool moduleEnabled;
string processName;
string programPath;
string programArgs;
string moduleAlias;
string moduleAuthor;
bool aliveCheck;
bool requirePrefix;
int sendDelay;
bool simulate;
double simulationSuccessRatio;
ModuleSimulationOptions simOptions;
List<IPAddress> ips;
int port;
int checkInterval;
ModuleClient mod;
XmlDocument tmpDoc;
try
{
// Module check
if ((modules.Name != "module") ||
(modules.Attributes.Count < 1) ||
(modules.Attributes["name"] == null) ||
(modules.Attributes["name"].Value.Length < 1))
return false;
#region Module information extraction
FetchModuleInfo(modules, out moduleName, out moduleEnabled, out moduleAlias, out moduleAuthor);
log.WriteLine(1, "Loading module " + moduleName + (moduleAlias != moduleName ? " alias " + moduleAlias : ""));
// Create a XML sub-document XML
tmpDoc = new XmlDocument();
tmpDoc.LoadXml(modules.OuterXml);
#region Get program path and program arguments
FetchProgramInfo(tmpDoc, out processName, out programPath, out programArgs);
#endregion
// Leo el comando de inicio
//if (tmpDoc.GetElementsByTagName("startupCommand").Count != 0)
// startupMessage = Command.Parse(tmpDoc.GetElementsByTagName("startupCommand")[0].InnerText);
// Get the array of ip addresses where the module can be
if (!FetchModuleConnectionSettings(tmpDoc, log, out ips, out port))
return false;
// Veify if Blackbard must check Module's alive status
FetchModuleStatusCheckSettings(tmpDoc, out aliveCheck, out checkInterval);
// Verify if the Module requires SOURCE DESTINATION prefix
if (
(tmpDoc.GetElementsByTagName("requirePrefix").Count == 0) ||
!Boolean.TryParse(tmpDoc.GetElementsByTagName("requirePrefix")[0].InnerText, out requirePrefix)
) requirePrefix = false;
// Delay between send operations
if (
(tmpDoc.GetElementsByTagName("sendDelay").Count == 0) ||
!Int32.TryParse(tmpDoc.GetElementsByTagName("sendDelay")[0].InnerText, out sendDelay)
) sendDelay = -1;
// Simulation options
simOptions = ModuleSimulationOptions.SimulationDisabled;
if (tmpDoc.GetElementsByTagName("simulate").Count != 0)
{
node = tmpDoc.GetElementsByTagName("simulate")[0];
simulationSuccessRatio = -1;
if ((node.Attributes["successRatio"] == null) || !Double.TryParse(node.Attributes["successRatio"].InnerText, out simulationSuccessRatio) || (simulationSuccessRatio < 0) || (simulationSuccessRatio > 1))
simulationSuccessRatio = -1;
if (Boolean.TryParse(node.InnerText, out simulate))
simOptions = (simulationSuccessRatio != -1) ?
new ModuleSimulationOptions(simulationSuccessRatio) :
new ModuleSimulationOptions(simulate);
}
#endregion
#region Module Validation
ValidateModuleName(blackboard, log, ref moduleName, ref moduleEnabled, moduleAlias, disabledModules);
#endregion
// Module Creation
mod = new ModuleClientTcp(moduleName, ips, port);
mod.Enabled = moduleEnabled;
mod.Author = moduleAuthor;
mod.ProcessInfo.ProcessName = processName;
mod.ProcessInfo.ProgramPath = programPath;
mod.ProcessInfo.ProgramArgs = programArgs;
mod.AliveCheck = aliveCheck;
mod.RequirePrefix = requirePrefix;
mod.SendDelay = sendDelay;
mod.Simulation = simOptions;
mod.Alias = moduleAlias;
mod.CheckInterval = checkInterval;
#region Actions Extraction
// Startup actions extraction
LoadModuleActions("onStart", "Startup", tmpDoc, mod.StartupActions, log);
// Restart actions extraction
LoadModuleActions("onRestart", "Restart", tmpDoc, mod.RestartActions, log);
// Restart Test actions extraction
LoadModuleActions("onRestartTest", "Restart-Test", tmpDoc, mod.RestartTestActions, log);
// Stop actons extraction
LoadModuleActions("onStop", "Stop", tmpDoc, mod.StopActions, log);
// Test Timeout actons extraction
LoadModuleActions("onTestTimeOut", "Test Timeout", tmpDoc, mod.TestTimeOutActions, log);
#endregion
//Extract Module Commands
ExtractPrototypes(mod, tmpDoc, log);
//if(mod.Prototypes.Count < 1)
// return false;
// Add module to blackboard
AddModuleToBlackboard(blackboard, log, mod, disabledModules);
}
catch
{
// Error al cargar el modulo
log.WriteLine(2, "Invalid module");
// Continuo con el siguiente
return false;
}
return mod.Enabled;
}
/// <summary>
/// Loads the startup sequence of the blackboard modules
/// </summary>
/// <param name="blackboard">The blackboard where will be loaded the startup sequence</param>
/// <param name="doc">The xml document from which the actions will be loaded</param>
/// <param name="log">The log writer</param>
private static void LoadStartupSequence(Blackboard blackboard, XmlDocument doc, ILogWriter log)
{
XmlNodeList modules;
string moduleName;
if (doc.GetElementsByTagName("startupSequence").Count != 1)
{
log.WriteLine(1, "Startup sequence not found");
return;
}
modules = doc.GetElementsByTagName("startupSequence")[0].ChildNodes;
for(int i = 0; i < modules.Count; ++i)
{
try
{
// Module check
if ((modules[i].Name != "module") ||
//(modules[i].Attributes.Count < 1) ||
//(modules[i].Attributes["name"].Value.Length < 1) ||
(modules[i].InnerText == null) ||
(modules[i].InnerText.Length < 1))
continue;
//moduleName = modules[i].Attributes["name"].Value.ToUpper();
moduleName = modules[i].InnerText.ToUpper();
if(blackboard.StartupSequence.ModuleSequence.Contains(moduleName))
continue;
blackboard.StartupSequence.ModuleSequence.Add(moduleName);
}
catch
{
continue;
}
}
log.WriteLine(1, "Startup sequence: " + String.Join(", ", blackboard.StartupSequence.ModuleSequence.ToArray()));
}
/// <summary>
/// Converts the string representation of a response to a Response object.
/// A return value indicates whether the conversion succeded or not.
/// <param name="s">A string containing the response to convert</param>
/// <param name="blackboard">A blackboard which contains all information about modules</param>
/// <param name="response">When this method returns, contains the Response equivalent to the response
/// contained in s, if the conversion succeeded, or null if the conversion failed.
/// The conversion fails if the s parameter is a null reference (Nothing in Visual Basic) or is not of the correct format.
/// This parameter is passed uninitialized</param>
/// <param name="ex">When this method returns, contains the Exception generated during the parse operation,
/// if the conversion failed, or null if the conversion succeeded. The conversion fails if the s parameter
/// is a null reference (Nothing in Visual Basic) or is not of the correct format.
/// This parameter is passed uninitialized</param>
/// </summary>
/// <returns>true if conversion was successfull, false otherwise</returns>
protected static bool TryParse(string s, Blackboard blackboard, out Response response, out Exception ex)
{
Regex rx;
Match m;
Prototype proto;
//Module source;
IModule source;
//Module destination;
IModule destination;
string sCommand;
string sParams;
string sSrc;
string sDest;
string sId;
string sResult;
bool result;
int id;
ex = null;
response = null;
// Regular Expresion Generation
//rx = new Regex(@"((?<src>[\w\-]+)(\s+(?<dest>[\w\-]+))?\s+)?(?<cmd>[A-Za-z_]+)\s+(""(?<params>[^""]*)"")?\s+(@(?<id>\d+))?");
rx = rxResponseFromBlackboard;
m = rx.Match(s);
// Check if input string matchs Regular Expression
if (!m.Success)
{
ex = new ArgumentException("Invalid String", "s");
return false;
}
// Extract Data
sCommand = m.Result("${cmd}").ToLower();
sParams = m.Result("${params}");
sId = m.Result("${id}");
sSrc = m.Result("${src}");
sDest = m.Result("${dest}");
sResult = m.Result("${result}");
if ((sResult == null) || ((sResult != "1") && (sResult != "0")))
{
ex = new Exception("Invalid string. No suitable result value found");
return false;
}
result = (sResult == "1");
if ((sId == null) || (sId.Length < 1)) id = -1;
else id = Int32.Parse(sId);
// Check if source module is specified
if ((sSrc == null) || (sSrc.Length < 1) || !blackboard.Modules.Contains(sSrc))
{
ex = new Exception("No source module found for response provided");
return false;
}
source = blackboard.Modules[sSrc];
// Browse for destination module and prototype
if (!blackboard.FindDestinationModule(sCommand, out source, out proto))
//Since the response arrived from a module which can't generate it a exception is rised
{
ex = new Exception("Sender module and generator module does not match");
return false;
}
// if destination module is specified, then it mus be set
if ((sDest != null) && (sDest.Length > 0) && source.Parent.Modules.Contains(sDest))
destination = source.Parent.Modules[sDest];
// Else, since there is no way at this point to determine which is destination module for response
// and this is no specified, it is set to null, to allow blackboard to find an apropiate one
else
destination = null;
// Check if response matchs a prototype
if ((proto != null) && proto.ParamsRequired && ((sParams == null) || (sParams.Length < 1)))
{
ex = new Exception("Invalid string. The Response requires parameters");
return false;
}
// Create the Response
response = new Response(source, destination, sCommand, sParams, result, id);
response.prototype = proto;
if (!response.success) response.failReason = ResponseFailReason.ExecutedButNotSucceded;
return true;
}
/// <summary>
/// Validates the name of a module and renames it until a valid name is found
/// </summary>
private static void ValidateModuleName(Blackboard blackboard, ILogWriter log, ref string moduleName, ref bool moduleEnabled, string moduleAlias, SortedList<string, ModuleClient> disabledModules)
{
// Module validation.
// If a module with the same name exists, rename the current module and disable it
if (blackboard.Modules.Contains(moduleName) || disabledModules.ContainsKey(moduleName))
{
int n = 1;
string newModuleName = moduleName + n.ToString().PadLeft(2, '0');
while (blackboard.Modules.Contains(newModuleName) || disabledModules.ContainsKey(newModuleName))
{
++n;
newModuleName = moduleName + n.ToString().PadLeft(2, '0');
}
log.WriteLine(1, "Module " + moduleName + " already exists. Renamed to " + newModuleName + (moduleAlias != moduleName ? " alias " + moduleAlias : ""));
moduleName = newModuleName;
moduleEnabled = false;
}
}
/// <summary>
/// Converts the string representation of a response to a Response object.
/// A return value indicates whether the conversion succeded or not.
/// <param name="s">A string containing the response to convert</param>
/// <param name="blackboard">A blackboard which contains all information about modules</param>
/// <param name="response">When this method returns, contains the Response equivalent to the response
/// contained in s, if the conversion succeeded, or null if the conversion failed.
/// The conversion fails if the s parameter is a null reference (Nothing in Visual Basic) or is not of the correct format.
/// This parameter is passed uninitialized</param>
/// <param name="ex">When this method returns, contains the Exception generated during the parse operation,
/// if the conversion failed, or null if the conversion succeeded. The conversion fails if the s parameter
/// is a null reference (Nothing in Visual Basic) or is not of the correct format.
/// This parameter is passed uninitialized</param>
/// </summary>
/// <returns>true if conversion was successfull, false otherwise</returns>
protected static bool TryParse(string s, Blackboard blackboard, out Response response, out Exception ex)
{
IPrototype proto;
IModuleClient source;
IModuleClient destination;
string sCommand;
string sParams;
string sSrc;
string sDest;
bool result;
int iResult;
int id;
ex = null;
response = null;
// Extract Data
CommandBase.XtractCommandElements(s, out sSrc, out sDest, out sCommand, out sParams, out iResult, out id);
if ((sCommand == null) || (iResult == -1))
{
ex = new ArgumentException("Invalid String", "s");
return false;
}
result = iResult == 1;
// Check if source module is specified
if ((sSrc == null) || (sSrc.Length < 1) || !blackboard.Modules.Contains(sSrc))
{
ex = new Exception("No source module found for response provided");
return false;
}
source = blackboard.Modules[sSrc];
// Browse for destination module and prototype
if (!blackboard.FindDestinationModule(sCommand, out source, out proto))
//Since the response arrived from a module which can't generate it a exception is rised
{
ex = new Exception("Sender module and generator module does not match");
return false;
}
// if destination module is specified, then it mus be set
if ((sDest != null) && (sDest.Length > 0) && source.Parent.Modules.Contains(sDest))
destination = source.Parent.Modules[sDest];
// Else, since there is no way at this point to determine which is destination module for response
// and this is no specified, it is set to null, to allow blackboard to find an apropiate one
else
destination = null;
// Check if response matchs a prototype
if ((proto != null) && proto.ParamsRequired && ((sParams == null) || (sParams.Length < 1)))
{
ex = new Exception("Invalid string. The Response requires parameters");
return false;
}
// Create the Response
response = new Response(source, destination, sCommand, sParams, result, id);
response.prototype = proto;
if (!response.success) response.failReason = ResponseFailReason.ExecutedButNotSucceded;
return true;
}
private static void AddDisabledModules(Blackboard blackboard, SortedList<string, ModuleClient> disabledModules, ILogWriter log)
{
log.WriteLine(2, "Adding disabled modules");
for (int i = 0; i < disabledModules.Count; ++i)
{
try
{
ModuleClient mod = disabledModules.Values[i];
blackboard.Modules.Add(mod);
log.WriteLine(3, "Added module " + mod.Name + (mod.Alias != mod.Name ? " alias " + mod.Alias : String.Empty));
}
catch { }
}
}
/// <summary>
/// Loads general blackboard configuration fro the provided XML document
/// </summary>
/// <param name="blackboard">The blackboard where will be loaded the settings</param>
/// <param name="doc">The xml document from which the settings will be loaded</param>
/// <param name="log">The log writer</param>
private static void LoadBlackboardConfiguration(Blackboard blackboard, XmlDocument doc, ILogWriter log)
{
XmlDocument tmpDoc;
ModuleClient mod;
int sendAttempts;
int globalCheckInterval;
int moduleLoadDelay;
log.WriteLine(0, "Loading configuration...");
tmpDoc = new XmlDocument();
tmpDoc.LoadXml(doc.GetElementsByTagName("configuration")[0].OuterXml);
#region Blackboard Input port, Auto-Stop Time, Test Timeout and Name
LoadBlackboardPort(tmpDoc, blackboard, log);
LoadBlackboardAutoStopTime(tmpDoc, blackboard, log);
LoadBlackboardTestTimeOut(doc, blackboard, log);
LoadBlackboardName(doc, blackboard, log);
#endregion
#region Startup/Shutdown sequence
LoadStartupSequence(blackboard, doc, log);
LoadShutdownSequence(blackboard, doc, log);
#endregion
#region Other Configurations
// Read global alive/busy/ready check interval
if ((tmpDoc.GetElementsByTagName("globalCheckInterval").Count == 0) ||
!Int32.TryParse(tmpDoc.GetElementsByTagName("globalCheckInterval")[0].InnerText, out globalCheckInterval) ||
(globalCheckInterval < ModuleClient.MinCheckInterval) || (globalCheckInterval > ModuleClient.MaxCheckInterval))
{
log.WriteLine(1, "No alive/busy/ready check interval specified (or invalid), using default: " + ModuleClient.GlobalCheckInterval);
}
else
{
ModuleClient.GlobalCheckInterval = globalCheckInterval;
log.WriteLine(1, "alive/busy/ready check interval: " + ModuleClient.GlobalCheckInterval);
}
// Module load delay
if ((tmpDoc.GetElementsByTagName("moduleLoadDelay").Count == 0) ||
!Int32.TryParse(tmpDoc.GetElementsByTagName("moduleLoadDelay")[0].InnerText, out moduleLoadDelay) ||
(moduleLoadDelay < 0) || (moduleLoadDelay > 10000))
{
log.WriteLine(1, "Module load delay not specified (or invalid), using default: " + blackboard.ModuleLoadDelay.ToString());
}
else
{
blackboard.ModuleLoadDelay = moduleLoadDelay;
log.WriteLine(1, "Module load delay: " + blackboard.ModuleLoadDelay.ToString());
}
// Leo intentos de reenvio
if ((tmpDoc.GetElementsByTagName("sendAttempts").Count == 0) ||
!Int32.TryParse(tmpDoc.GetElementsByTagName("sendAttempts")[0].InnerText, out sendAttempts) ||
(sendAttempts < 0) && (sendAttempts > 5))
{
log.WriteLine(1, "No response send attempts specified (or invalid), using default: " + blackboard.SendAttempts);
}
else
{
blackboard.sendAttempts = sendAttempts;
log.WriteLine(1, "Response send attempts: " + blackboard.SendAttempts);
}
#endregion
#region Actions Extraction
mod = blackboard.VirtualModule;
// Startup actions extraction
LoadModuleActions("onStart", "Startup", tmpDoc, mod.StartupActions, log);
// Restart actions extraction
LoadModuleActions("onRestart", "Restart", tmpDoc, mod.RestartActions, log);
// Restart Test actions extraction
LoadModuleActions("onRestartTest", "Restart-Test", tmpDoc, mod.RestartTestActions, log);
// Stop actons extraction
LoadModuleActions("onStop", "Stop", tmpDoc, mod.StopActions, log);
// Test Timeout actons extraction
LoadModuleActions("onTestTimeOut", "Test Timeout", tmpDoc, mod.TestTimeOutActions, log);
#endregion
}
/// <summary>
/// Creates a module using data contained in a xml module
/// </summary>
/// <param name="blackboard">The blackboard which will contain the module</param>
/// <param name="xmlModuleNode">Xml node used to fetch the required module information.</param>
/// <param name="log">The log writer</param>
/// <returns>The module created with the data contained in the xml document</returns>
private static ModuleClient CreateModule(Blackboard blackboard, XmlNode xmlModuleNode, ILogWriter log)
{
XmlDocument tmpDoc;
XmlNode node;
ModuleClient mod;
string moduleName;
bool moduleEnabled;
string moduleAlias;
bool aliveCheck;
bool requirePrefix;
int sendDelay;
bool simulate;
double simulationSuccessRatio;
ModuleSimulationOptions simOptions;
string processName;
string programPath;
string programArgs;
List<IPAddress> ips;
int port;
int checkInterval;
// Enabled
moduleEnabled = true;
if ((xmlModuleNode.Attributes["enabled"] != null) &&
Boolean.TryParse(xmlModuleNode.Attributes["enabled"].Value, out moduleEnabled) &&
!moduleEnabled)
return null;
moduleName = xmlModuleNode.Attributes["name"].Value.ToUpper();
// Alias
if (xmlModuleNode.Attributes["alias"] != null)
moduleAlias = xmlModuleNode.Attributes["alias"].Value;
else moduleAlias = moduleName;
log.WriteLine(1, "Loading module " + moduleName + (moduleAlias != moduleName ? " alias " + moduleAlias : ""));
// Create a XML sub-document XML
tmpDoc = new XmlDocument();
tmpDoc.LoadXml(xmlModuleNode.OuterXml);
#region Get program path and program arguments
FetchProgramInfo(tmpDoc, out processName, out programPath, out programArgs);
#endregion
// Leo el comando de inicio
//if (tmpDoc.GetElementsByTagName("startupCommand").Count != 0)
// startupMessage = Command.Parse(tmpDoc.GetElementsByTagName("startupCommand")[0].InnerText);
// Get the array of ip addresses where the module can be
ips = FetchIpAddresses(tmpDoc);
if ((ips == null) || (ips.Count < 1))
{
log.WriteLine(2, "\tNo valid IP Address provided");
log.WriteLine(1, "Module skipped");
return null;
}
// Leo el puerto de conexion del modulo
if (
(tmpDoc.GetElementsByTagName("port").Count == 0) ||
!Int32.TryParse(tmpDoc.GetElementsByTagName("port")[0].InnerText, out port) ||
(port <= 1024))
{
log.WriteLine(2, "\tInvalid port");
log.WriteLine(1, "Module skipped");
return null;
}
log.WriteLine("\t" + ips[0].ToString() + ":" + port);
// Veify if Blackbard must check Module's alive status
checkInterval = ModuleClient.GlobalCheckInterval;
if (tmpDoc.GetElementsByTagName("aliveCheck").Count != 0)
{
node = tmpDoc.GetElementsByTagName("aliveCheck")[0];
if (!Boolean.TryParse(node.InnerText, out aliveCheck))
aliveCheck = true;
// Read alive/busy/ready check interval
if ((node.Attributes["interval"] == null) ||
!Int32.TryParse(node.Attributes["interval"].InnerText, out checkInterval) ||
(checkInterval < ModuleClient.MinCheckInterval) ||
(checkInterval > ModuleClient.MaxCheckInterval))
checkInterval = ModuleClient.GlobalCheckInterval;
}
else aliveCheck = true;
// Verify if the Module requires SOURCE DESTINATION prefix
if (
(tmpDoc.GetElementsByTagName("requirePrefix").Count == 0) ||
!Boolean.TryParse(tmpDoc.GetElementsByTagName("requirePrefix")[0].InnerText, out requirePrefix)
) requirePrefix = false;
// Delay between send operations
if (
(tmpDoc.GetElementsByTagName("sendDelay").Count == 0) ||
!Int32.TryParse(tmpDoc.GetElementsByTagName("sendDelay")[0].InnerText, out sendDelay)
) sendDelay = -1;
// Simulation options
simOptions = ModuleSimulationOptions.SimulationDisabled;
if (tmpDoc.GetElementsByTagName("simulate").Count != 0)
{
node = tmpDoc.GetElementsByTagName("simulate")[0];
simulationSuccessRatio = -1;
if ((node.Attributes["successRatio"] == null) || !Double.TryParse(node.Attributes["successRatio"].InnerText, out simulationSuccessRatio) || (simulationSuccessRatio < 0) || (simulationSuccessRatio > 1))
simulationSuccessRatio = -1;
if (Boolean.TryParse(node.InnerText, out simulate))
simOptions = (simulationSuccessRatio != -1) ?
new ModuleSimulationOptions(simulationSuccessRatio) :
new ModuleSimulationOptions(simulate);
}
// Module Creation
mod = new ModuleClientTcp(moduleName, ips, port);
mod.ProcessInfo.ProcessName = processName;
mod.ProcessInfo.ProgramPath = programPath;
mod.ProcessInfo.ProgramArgs = programArgs;
mod.AliveCheck = aliveCheck;
mod.RequirePrefix = requirePrefix;
mod.SendDelay = sendDelay;
mod.Simulation = simOptions;
mod.Alias = moduleAlias;
mod.CheckInterval = checkInterval;
return mod;
}
/// <summary>
/// Loads modules configuration from the provided XML document
/// </summary>
/// <param name="blackboard">The blackboard where will be loaded the modules</param>
/// <param name="doc">The xml document from which the modules will be loaded</param>
/// <param name="log">The log writer</param>
/// <returns>The number of enabled modules loaded</returns>
private static int LoadBlackboardModules(Blackboard blackboard, XmlDocument doc, ILogWriter log)
{
XmlNodeList modules;
int i;
//Command startupCommand;
SortedList<string, ModuleClient> disabledModules;
int clientModulesAdded;
if (doc.GetElementsByTagName("modules").Count < 1)
{
log.WriteLine(0, "No modules to load");
throw new Exception("No modules to load");
}
modules = doc.GetElementsByTagName("modules")[0].ChildNodes;
clientModulesAdded = 0;
disabledModules = new SortedList<string, ModuleClient>();
for (i = 0; i < modules.Count; ++i)
{
if(LoadModule(blackboard, modules[i], log, disabledModules))
++clientModulesAdded;
}
// Add disabled modules
AddDisabledModules(blackboard, disabledModules, log);
return clientModulesAdded;
}
/// <summary>
/// Converts the string representation of a command to a Command object.
/// A return value indicates whether the conversion succeded or not.
/// </summary>
/// <param name="s">A string containing the command to convert</param>
/// <param name="blackboard">A blackboard which contains all information about modules</param>
/// <param name="command">When this method returns, contains the Command equivalent to the command
/// contained in s, if the conversion succeeded, or null if the conversion failed.
/// The conversion fails if the s parameter is a null reference (Nothing in Visual Basic) or is not of the correct format.
/// This parameter is passed uninitialized</param>
/// <returns>true if conversion was successfull, false otherwise</returns>
public static bool TryParse(string s, Blackboard blackboard, out Command command)
{
Exception ex;
return TryParse(s, blackboard, out command, out ex);
}
/// <summary>
/// Fetch the blackboard virtual module name
/// </summary>
/// <param name="doc">XML document which contains the Blackboard data</param>
/// <param name="blackboard">The blackboard which data will be set</param>
/// <param name="log">The log writer</param>
private static void LoadBlackboardName(XmlDocument doc, Blackboard blackboard, ILogWriter log)
{
string moduleName;
if ((doc.GetElementsByTagName("name").Count != 1) || ((moduleName = doc.GetElementsByTagName("name")[0].InnerText.Trim()).Length < 3))
{
log.WriteLine(1, "No Virtual module name specified.");
log.WriteLine(1, "\tUsing virtual module name: BLACKBOARD");
blackboard.VirtualModule = new ModuleBlackboard("BLACKBOARD");
}
else
{
moduleName = moduleName.ToUpper();
blackboard.VirtualModule = new ModuleBlackboard(moduleName.ToUpper());
log.WriteLine(1, "Blackboard virtual module name: " + moduleName);
moduleName = null;
}
}
/// <summary>
/// Converts the string representation of a command to a Command object.
/// A return value indicates whether the conversion succeded or not.
/// </summary>
/// <param name="s">A string containing the command to convert</param>
/// <param name="blackboard">A blackboard which contains all information about modules</param>
/// <param name="cmd">When this method returns, contains the Command equivalent to the command
/// contained in s, if the conversion succeeded, or null if the conversion failed.
/// The conversion fails if the s parameter is a null reference (Nothing in Visual Basic) or is not of the correct format.
/// This parameter is passed uninitialized</param>
/// <param name="ex">When this method returns, contains the Exception generated during the parse operation,
/// if the conversion failed, or null if the conversion succeeded. The conversion fails if the s parameter
/// is a null reference (Nothing in Visual Basic) or is not of the correct format.
/// This parameter is passed uninitialized</param>
/// <returns>true if conversion was successfull, false otherwise</returns>
protected static bool TryParse(string s, Blackboard blackboard, out Command cmd, out Exception ex)
{
IPrototype proto;
//Module source;
//Module destination;
IModuleClient source;
IModuleClient destination;
string sCommand;
string sParams;
string sSrc;
string sDest;
int result;
int id;
cmd = null;
ex = null;
// Extract Data
CommandBase.XtractCommandElements(s, out sSrc, out sDest, out sCommand, out sParams, out result, out id);
if ((sCommand == null) || (result != -1))
{
ex = new ArgumentException("Invalid String", "s");
return false;
}
// Check if source module is specified
if ((sSrc == null) || (sSrc.Length < 1) || !blackboard.Modules.Contains(sSrc))
{
ex = new Exception("No source module found for command provided");
return false;
}
source = blackboard.Modules[sSrc];
// Browse for destination module and prototype
if (!blackboard.FindDestinationModule(sCommand, out destination, out proto))
//throw new Exception("No destination module found for command provided");
{
// No destination module found. Must check if destination is availiable
if ((sDest == null) || (sDest.Length < 1) || !blackboard.Modules.Contains(sDest))
{
ex = new Exception("No destination module found for command provided");
return false;
}
destination = blackboard.Modules[sDest];
proto = null;
}
// Check if command matchs a prototype
if ((proto != null) && proto.ParamsRequired && ((sParams == null) || (sParams.Length < 1)))
{
ex = new Exception("Invalid string. The Command requires parameters");
return false;
}
// Create the Command
cmd = new Command(source, destination, sCommand, sParams, id);
cmd.prototype = proto;
cmd.sentTime = DateTime.Now;
return true;
}
/// <summary>
/// Fetch the blackboard input port
/// </summary>
/// <param name="doc">XML document which contains the Blackboard data</param>
/// <param name="blackboard">The blackboard which data will be set</param>
/// <param name="log">The log writer</param>
private static void LoadBlackboardPort(XmlDocument doc, Blackboard blackboard, ILogWriter log)
{
// Leo puerto
if ((doc.GetElementsByTagName("port").Count != 1) ||
!Int32.TryParse(doc.GetElementsByTagName("port")[0].InnerText, out blackboard.port))
{
blackboard.port = 2300;
log.WriteLine(1, "No Blackboard port specified, using default: " + blackboard.Port);
}
else log.WriteLine(1, "Blackboard port: " + blackboard.Port);
}
