public void GetProperties()
{
ModelObjectEnumerator modelObjectEnum = model.GetModelObjectSelector().GetSelectedObjects();
if (modelObjectEnum.GetSize() == 1)
{
while (modelObjectEnum.MoveNext())
{
if (modelObjectEnum.Current is Tekla.Structures.Model.BoltGroup)
{
BoltGroup boltGroup = (BoltGroup)modelObjectEnum.Current;
boltSize = boltGroup.BoltSize.ToString();
boltStandard = boltGroup.BoltStandard.ToString();
if (boltGroup.BoltType == BoltGroup.BoltTypeEnum.BOLT_TYPE_SITE)
boltType = BoltTypeEnum.Site;
else if (boltGroup.BoltType == BoltGroup.BoltTypeEnum.BOLT_TYPE_WORKSHOP)
boltType = BoltTypeEnum.Workshop;
if (boltGroup.ThreadInMaterial == BoltGroup.BoltThreadInMaterialEnum.THREAD_IN_MATERIAL_YES)
threadMaterial = ThreadMaterialEnum.Yes;
else if (boltGroup.ThreadInMaterial == BoltGroup.BoltThreadInMaterialEnum.THREAD_IN_MATERIAL_NO)
threadMaterial = ThreadMaterialEnum.No;
cutLength = boltGroup.CutLength.ToString();
extraLength = boltGroup.ExtraLength.ToString();
boltGroupShape = boltGroup.GetType().Name;
if (boltGroup is BoltArray)
{
BoltArray boltArray = (BoltArray)boltGroup;
string boltPositionX = "";
for (int i = 0; i < boltArray.GetBoltDistXCount(); i++)
boltPositionX = boltPositionX + boltArray.GetBoltDistX(i).ToString() + " ";
boltDistX = boltPositionX.Trim();
string boltPositionY = "";
for (int i = 0; i < boltArray.GetBoltDistYCount(); i++)
boltPositionY = boltPositionY + boltArray.GetBoltDistY(i).ToString() + " ";
boltDistY = boltPositionY.Trim();
}
else if (boltGroup is BoltXYList)
{
BoltXYList boltXYList = (BoltXYList)boltGroup;
string boltPositionX = "";
for (int i = 0; i < boltXYList.GetBoltDistXCount(); i++)
boltPositionX = boltPositionX + boltXYList.GetBoltDistX(i).ToString() + " ";
boltDistX = boltPositionX.Trim();
string boltPositionY = "";
for (int i = 0; i < boltXYList.GetBoltDistYCount(); i++)
boltPositionY = boltPositionY + boltXYList.GetBoltDistY(i).ToString() + " ";
boltDistY = boltPositionY.Trim();
}
else if (boltGroup is BoltCircle)
{
BoltCircle boltCircle = (BoltCircle)boltGroup;
boltDistX = boltCircle.NumberOfBolts.ToString();
boltDistY = boltCircle.Diameter.ToString();
}
tolerance = boltGroup.Tolerance.ToString();
if (boltGroup.HoleType == BoltGroup.BoltHoleTypeEnum.HOLE_TYPE_SLOTTED)
holeType = HoleTypeEnum.Slotted;
else if (boltGroup.HoleType == BoltGroup.BoltHoleTypeEnum.HOLE_TYPE_OVERSIZED)
holeType = HoleTypeEnum.Oversized;
slottedHoleX = boltGroup.SlottedHoleX.ToString();
slottedHoleY = boltGroup.SlottedHoleY.ToString();
if (boltGroup.RotateSlots == BoltGroup.BoltRotateSlotsEnum.ROTATE_SLOTS_ODD)
rotateSlots = RotateSlotEnum.Odd;
else if (boltGroup.RotateSlots == BoltGroup.BoltRotateSlotsEnum.ROTATE_SLOTS_EVEN)
rotateSlots = RotateSlotEnum.Even;
else if (boltGroup.RotateSlots == BoltGroup.BoltRotateSlotsEnum.ROTATE_SLOTS_PARALLEL)
rotateSlots = RotateSlotEnum.Parallel;
if (boltGroup.Position.Plane == Position.PlaneEnum.LEFT) positionOnPlane = PositionPlaneEnum.Left;
else if (boltGroup.Position.Plane == Position.PlaneEnum.MIDDLE) positionOnPlane = PositionPlaneEnum.Middle;
else if (boltGroup.Position.Plane == Position.PlaneEnum.RIGHT) positionOnPlane = PositionPlaneEnum.Right;
positionOnPlaneOffset = boltGroup.Position.PlaneOffset.ToString("F02");
if (boltGroup.Position.Rotation == Position.RotationEnum.FRONT) positionRotation = PositionRotationEnum.Front;
else if (boltGroup.Position.Rotation == Position.RotationEnum.TOP) positionRotation = PositionRotationEnum.Top;
else if (boltGroup.Position.Rotation == Position.RotationEnum.BACK) positionRotation = PositionRotationEnum.Back;
else if (boltGroup.Position.Rotation == Position.RotationEnum.BELOW) positionRotation = PositionRotationEnum.Below;
positionRotationOffset = boltGroup.Position.RotationOffset.ToString("F02");
if (boltGroup.Position.Depth == Position.DepthEnum.BEHIND) positionAtDepth = PositionDepthEnum.Behind;
else if (boltGroup.Position.Depth == Position.DepthEnum.FRONT) positionAtDepth = PositionDepthEnum.Front;
else if (boltGroup.Position.Depth == Position.DepthEnum.MIDDLE) positionAtDepth = PositionDepthEnum.Middle;
positionAtDepthOffset = boltGroup.Position.DepthOffset.ToString("F02");
offsetFromStartX = boltGroup.StartPointOffset.Dx.ToString("F02");
offsetFromStartY = boltGroup.StartPointOffset.Dy.ToString("F02");
offsetFromStartZ = boltGroup.StartPointOffset.Dz.ToString("F02");
offsetFromEndX = boltGroup.EndPointOffset.Dx.ToString("F02");
offsetFromEndY = boltGroup.EndPointOffset.Dy.ToString("F02");
offsetFromEndZ = boltGroup.EndPointOffset.Dz.ToString("F02");
if (boltGroup.Hole1) hole1 = Bool.True; else hole1 = Bool.False;
if (boltGroup.Hole2) hole2 = Bool.True; else hole2 = Bool.False;
if (boltGroup.Hole3) hole3 = Bool.True; else hole3 = Bool.False;
if (boltGroup.Hole4) hole4 = Bool.True; else hole4 = Bool.False;
if (boltGroup.Hole5) hole5 = Bool.True; else hole5 = Bool.False;
if (boltGroup.Washer1) washer1 = Bool.True; else washer1 = Bool.False;
if (boltGroup.Washer2) washer2 = Bool.True; else washer2 = Bool.False;
if (boltGroup.Washer3) washer3 = Bool.True; else washer3 = Bool.False;
if (boltGroup.Nut1) nut1 = Bool.True; else nut1 = Bool.False;
if (boltGroup.Nut2) nut2 = Bool.True; else nut2 = Bool.False;
if (boltGroup.Bolt) boltShaft = Bool.True; else boltShaft = Bool.False;
}
}
}
if (modelObjectEnum.GetSize() > 1)
{
boltSize = "";
boltStandard = "";
boltType = new BoltTypeEnum();
threadMaterial = new ThreadMaterialEnum();
cutLength = "";
extraLength = "";
boltGroupShape = "";
boltDistX = "";
boltDistY = "";
tolerance = "";
slottedHoleX = "";
slottedHoleY = "";
rotateSlots = new RotateSlotEnum();
holeType = new HoleTypeEnum();
positionOnPlane = new PositionPlaneEnum();
positionOnPlaneOffset = "";
positionRotation = new PositionRotationEnum();
positionRotationOffset = "";
positionAtDepth = new PositionDepthEnum();
positionAtDepthOffset = "";
offsetFromStartX = "";
offsetFromStartY = "";
offsetFromStartZ = "";
offsetFromEndX = "";
offsetFromEndY = "";
offsetFromEndZ = "";
hole1 = new Bool();
hole2 = new Bool();
hole3 = new Bool();
hole4 = new Bool();
hole5 = new Bool();
boltShaft = new Bool();
washer1 = new Bool();
washer2 = new Bool();
washer3 = new Bool();
nut1 = new Bool();
nut2 = new Bool();
}
}
public void GetProperties()
{
ModelObjectEnumerator modelObjectEnum = model.GetModelObjectSelector().GetSelectedObjects();
if (modelObjectEnum.GetSize() == 1)
{
while (modelObjectEnum.MoveNext())
{
if (modelObjectEnum.Current is Tekla.Structures.Model.BoltGroup)
{
BoltGroup boltGroup = (BoltGroup)modelObjectEnum.Current;
boltSize = boltGroup.BoltSize.ToString();
boltStandard = boltGroup.BoltStandard.ToString();
if (boltGroup.BoltType == BoltGroup.BoltTypeEnum.BOLT_TYPE_SITE)
{
boltType = BoltTypeEnum.Site;
}
else if (boltGroup.BoltType == BoltGroup.BoltTypeEnum.BOLT_TYPE_WORKSHOP)
{
boltType = BoltTypeEnum.Workshop;
}
if (boltGroup.ThreadInMaterial == BoltGroup.BoltThreadInMaterialEnum.THREAD_IN_MATERIAL_YES)
{
threadMaterial = ThreadMaterialEnum.Yes;
}
else if (boltGroup.ThreadInMaterial == BoltGroup.BoltThreadInMaterialEnum.THREAD_IN_MATERIAL_NO)
{
threadMaterial = ThreadMaterialEnum.No;
}
cutLength = boltGroup.CutLength.ToString();
extraLength = boltGroup.ExtraLength.ToString();
boltGroupShape = boltGroup.GetType().Name;
if (boltGroup is BoltArray)
{
BoltArray boltArray = (BoltArray)boltGroup;
string boltPositionX = "";
for (int i = 0; i < boltArray.GetBoltDistXCount(); i++)
{
boltPositionX = boltPositionX + boltArray.GetBoltDistX(i).ToString() + " ";
}
boltDistX = boltPositionX.Trim();
string boltPositionY = "";
for (int i = 0; i < boltArray.GetBoltDistYCount(); i++)
{
boltPositionY = boltPositionY + boltArray.GetBoltDistY(i).ToString() + " ";
}
boltDistY = boltPositionY.Trim();
}
else if (boltGroup is BoltXYList)
{
BoltXYList boltXYList = (BoltXYList)boltGroup;
string boltPositionX = "";
for (int i = 0; i < boltXYList.GetBoltDistXCount(); i++)
{
boltPositionX = boltPositionX + boltXYList.GetBoltDistX(i).ToString() + " ";
}
boltDistX = boltPositionX.Trim();
string boltPositionY = "";
for (int i = 0; i < boltXYList.GetBoltDistYCount(); i++)
{
boltPositionY = boltPositionY + boltXYList.GetBoltDistY(i).ToString() + " ";
}
boltDistY = boltPositionY.Trim();
}
else if (boltGroup is BoltCircle)
{
BoltCircle boltCircle = (BoltCircle)boltGroup;
boltDistX = boltCircle.NumberOfBolts.ToString();
boltDistY = boltCircle.Diameter.ToString();
}
tolerance = boltGroup.Tolerance.ToString();
if (boltGroup.HoleType == BoltGroup.BoltHoleTypeEnum.HOLE_TYPE_SLOTTED)
{
holeType = HoleTypeEnum.Slotted;
}
else if (boltGroup.HoleType == BoltGroup.BoltHoleTypeEnum.HOLE_TYPE_OVERSIZED)
{
holeType = HoleTypeEnum.Oversized;
}
slottedHoleX = boltGroup.SlottedHoleX.ToString();
slottedHoleY = boltGroup.SlottedHoleY.ToString();
if (boltGroup.RotateSlots == BoltGroup.BoltRotateSlotsEnum.ROTATE_SLOTS_ODD)
{
rotateSlots = RotateSlotEnum.Odd;
}
else if (boltGroup.RotateSlots == BoltGroup.BoltRotateSlotsEnum.ROTATE_SLOTS_EVEN)
{
rotateSlots = RotateSlotEnum.Even;
}
else if (boltGroup.RotateSlots == BoltGroup.BoltRotateSlotsEnum.ROTATE_SLOTS_PARALLEL)
{
rotateSlots = RotateSlotEnum.Parallel;
}
if (boltGroup.Position.Plane == Position.PlaneEnum.LEFT)
{
positionOnPlane = PositionPlaneEnum.Left;
}
else if (boltGroup.Position.Plane == Position.PlaneEnum.MIDDLE)
{
positionOnPlane = PositionPlaneEnum.Middle;
}
else if (boltGroup.Position.Plane == Position.PlaneEnum.RIGHT)
{
positionOnPlane = PositionPlaneEnum.Right;
}
positionOnPlaneOffset = boltGroup.Position.PlaneOffset.ToString("F02");
if (boltGroup.Position.Rotation == Position.RotationEnum.FRONT)
{
positionRotation = PositionRotationEnum.Front;
}
else if (boltGroup.Position.Rotation == Position.RotationEnum.TOP)
{
positionRotation = PositionRotationEnum.Top;
}
else if (boltGroup.Position.Rotation == Position.RotationEnum.BACK)
{
positionRotation = PositionRotationEnum.Back;
}
else if (boltGroup.Position.Rotation == Position.RotationEnum.BELOW)
{
positionRotation = PositionRotationEnum.Below;
}
positionRotationOffset = boltGroup.Position.RotationOffset.ToString("F02");
if (boltGroup.Position.Depth == Position.DepthEnum.BEHIND)
{
positionAtDepth = PositionDepthEnum.Behind;
}
else if (boltGroup.Position.Depth == Position.DepthEnum.FRONT)
{
positionAtDepth = PositionDepthEnum.Front;
}
else if (boltGroup.Position.Depth == Position.DepthEnum.MIDDLE)
{
positionAtDepth = PositionDepthEnum.Middle;
}
positionAtDepthOffset = boltGroup.Position.DepthOffset.ToString("F02");
offsetFromStartX = boltGroup.StartPointOffset.Dx.ToString("F02");
offsetFromStartY = boltGroup.StartPointOffset.Dy.ToString("F02");
offsetFromStartZ = boltGroup.StartPointOffset.Dz.ToString("F02");
offsetFromEndX = boltGroup.EndPointOffset.Dx.ToString("F02");
offsetFromEndY = boltGroup.EndPointOffset.Dy.ToString("F02");
offsetFromEndZ = boltGroup.EndPointOffset.Dz.ToString("F02");
if (boltGroup.Hole1)
{
hole1 = Bool.True;
}
else
{
hole1 = Bool.False;
}
if (boltGroup.Hole2)
{
hole2 = Bool.True;
}
else
{
hole2 = Bool.False;
}
if (boltGroup.Hole3)
{
hole3 = Bool.True;
}
else
{
hole3 = Bool.False;
}
if (boltGroup.Hole4)
{
hole4 = Bool.True;
}
else
{
hole4 = Bool.False;
}
if (boltGroup.Hole5)
{
hole5 = Bool.True;
}
else
{
hole5 = Bool.False;
}
if (boltGroup.Washer1)
{
washer1 = Bool.True;
}
else
{
washer1 = Bool.False;
}
if (boltGroup.Washer2)
{
washer2 = Bool.True;
}
else
{
washer2 = Bool.False;
}
if (boltGroup.Washer3)
{
washer3 = Bool.True;
}
else
{
washer3 = Bool.False;
}
if (boltGroup.Nut1)
{
nut1 = Bool.True;
}
else
{
nut1 = Bool.False;
}
if (boltGroup.Nut2)
{
nut2 = Bool.True;
}
else
{
nut2 = Bool.False;
}
if (boltGroup.Bolt)
{
boltShaft = Bool.True;
}
else
{
boltShaft = Bool.False;
}
}
}
}
if (modelObjectEnum.GetSize() > 1)
{
boltSize = "";
boltStandard = "";
boltType = new BoltTypeEnum();
threadMaterial = new ThreadMaterialEnum();
cutLength = "";
extraLength = "";
boltGroupShape = "";
boltDistX = "";
boltDistY = "";
tolerance = "";
slottedHoleX = "";
slottedHoleY = "";
rotateSlots = new RotateSlotEnum();
holeType = new HoleTypeEnum();
positionOnPlane = new PositionPlaneEnum();
positionOnPlaneOffset = "";
positionRotation = new PositionRotationEnum();
positionRotationOffset = "";
positionAtDepth = new PositionDepthEnum();
positionAtDepthOffset = "";
offsetFromStartX = "";
offsetFromStartY = "";
offsetFromStartZ = "";
offsetFromEndX = "";
offsetFromEndY = "";
offsetFromEndZ = "";
hole1 = new Bool();
hole2 = new Bool();
hole3 = new Bool();
hole4 = new Bool();
hole5 = new Bool();
boltShaft = new Bool();
washer1 = new Bool();
washer2 = new Bool();
washer3 = new Bool();
nut1 = new Bool();
nut2 = new Bool();
}
}
public void GetProperties()
{
ModelObjectEnumerator modelObjectEnum = model.GetModelObjectSelector().GetSelectedObjects();
if (modelObjectEnum.GetSize() == 1)
{
while (modelObjectEnum.MoveNext())
{
if (modelObjectEnum.Current is Tekla.Structures.Model.ContourPlate)
{
Tekla.Structures.Model.ContourPlate contourPlate = (Tekla.Structures.Model.ContourPlate)modelObjectEnum.Current;
TransformationPlane currentTP = new TransformationPlane();
currentTP = model.GetWorkPlaneHandler().GetCurrentTransformationPlane();
model.GetWorkPlaneHandler().SetCurrentTransformationPlane(new TransformationPlane());
contourPlate.Select();
Assembly assembly = contourPlate.GetAssembly() as Tekla.Structures.Model.Assembly;
assembly.GetReportProperty("ASSEMBLY_POSITION_CODE", ref gridLocation);
partType = contourPlate.GetType().Name;
partID = contourPlate.Identifier.ID.ToString();
contourPlate.GetReportProperty("OWNER", ref owner);
partPrefix = contourPlate.PartNumber.Prefix;
partStartNo = contourPlate.PartNumber.StartNumber.ToString();
assemblyPrefix = contourPlate.AssemblyNumber.Prefix;
assemblyStartNo = contourPlate.AssemblyNumber.StartNumber.ToString();
Phase CurrentPhase = new Phase();
contourPlate.GetPhase(out CurrentPhase);
phase = CurrentPhase.PhaseNumber.ToString();
name = contourPlate.Name;
profile = contourPlate.Profile.ProfileString;
material = contourPlate.Material.MaterialString;
finish = contourPlate.Finish;
classValue = contourPlate.Class;
if (contourPlate.Position.Plane == Position.PlaneEnum.LEFT)
{
positionOnPlane = PositionPlaneEnum.Left;
}
else if (contourPlate.Position.Plane == Position.PlaneEnum.MIDDLE)
{
positionOnPlane = PositionPlaneEnum.Middle;
}
else if (contourPlate.Position.Plane == Position.PlaneEnum.RIGHT)
{
positionOnPlane = PositionPlaneEnum.Right;
}
positionOnPlaneOffset = contourPlate.Position.PlaneOffset.ToString("F02");
if (contourPlate.Position.Rotation == Position.RotationEnum.BACK)
{
positionRotation = PositionRotationEnum.Back;
}
else if (contourPlate.Position.Rotation == Position.RotationEnum.BELOW)
{
positionRotation = PositionRotationEnum.Below;
}
else if (contourPlate.Position.Rotation == Position.RotationEnum.FRONT)
{
positionRotation = PositionRotationEnum.Front;
}
else if (contourPlate.Position.Rotation == Position.RotationEnum.TOP)
{
positionRotation = PositionRotationEnum.Top;
}
positionRotationOffset = contourPlate.Position.RotationOffset.ToString("F02");
if (contourPlate.Position.Depth == Position.DepthEnum.BEHIND)
{
positionAtDepth = PositionDepthEnum.Behind;
}
else if (contourPlate.Position.Depth == Position.DepthEnum.FRONT)
{
positionAtDepth = PositionDepthEnum.Front;
}
else if (contourPlate.Position.Depth == Position.DepthEnum.MIDDLE)
{
positionAtDepth = PositionDepthEnum.Middle;
}
positionAtDepthOffset = contourPlate.Position.DepthOffset.ToString("F02");
contourPlate.GetUserProperty("USER_FIELD_1", ref userfield1);
contourPlate.GetUserProperty("USER_FIELD_2", ref userfield2);
contourPlate.GetUserProperty("USER_FIELD_3", ref userfield3);
contourPlate.GetUserProperty("USER_FIELD_4", ref userfield4);
contourPlate.GetUserProperty("comment", ref notesComments);
contourPlate.GetUserProperty("FIT_NOTES", ref fittingNotes);
contourPlate.GetUserProperty("FIT_NOTES2", ref fittingNotes2);
contourPlate.GetUserProperty("cambering", ref cambering);
contourPlate.GetUserProperty("PAINT", ref paint);
contourPlate.GetUserProperty("PRELIM_MARK", ref preliminaryMark);
contourPlate.GetUserProperty("PAINT_WFT", ref paintWFT);
contourPlate.GetUserProperty("PAINT_DFT", ref paintDFT);
double dblshear1 = 0; contourPlate.GetUserProperty("shear1", ref dblshear1); dblshear1 = dblshear1 * 0.001; shearStart = dblshear1.ToString();
double dblshear2 = 0; contourPlate.GetUserProperty("shear2", ref dblshear2); dblshear2 = dblshear2 * 0.001; shearEnd = dblshear2.ToString();
double dblaxial1 = 0; contourPlate.GetUserProperty("axial1", ref dblaxial1); dblaxial1 = dblaxial1 * 0.001; axialStart = dblaxial1.ToString();
double dblaxial2 = 0; contourPlate.GetUserProperty("axial2", ref dblaxial2); dblaxial2 = dblaxial2 * 0.001; axialEnd = dblaxial2.ToString();
double dblmoment1 = 0; contourPlate.GetUserProperty("moment1", ref dblmoment1); dblmoment1 = dblmoment1 * 0.001; momentStart = dblmoment1.ToString();
double dblmoment2 = 0; contourPlate.GetUserProperty("moment2", ref dblmoment2); dblmoment2 = dblmoment2 * 0.001; momentEnd = dblmoment2.ToString();
contourPlate.GetUserProperty("CONN_CODE_END1", ref connCodeStart);
contourPlate.GetUserProperty("CONN_CODE_END2", ref connCodeEnd);
model.GetWorkPlaneHandler().SetCurrentTransformationPlane(currentTP);
}
}
}
if (modelObjectEnum.GetSize() > 1)
{
partType = "";
partID = "";
owner = "";
gridLocation = "";
partPrefix = "";
partStartNo = "";
assemblyPrefix = "";
assemblyStartNo = "";
phase = "";
name = "";
profile = "";
material = "";
finish = "";
classValue = "";
userfield1 = "";
userfield2 = "";
userfield3 = "";
userfield4 = "";
notesComments = "";
fittingNotes = "";
fittingNotes2 = "";
cambering = "";
paint = "";
preliminaryMark = "";
paintWFT = "";
paintDFT = "";
shearStart = "";
shearEnd = "";
axialStart = "";
axialEnd = "";
momentStart = "";
momentEnd = "";
connCodeStart = "";
connCodeEnd = "";
positionOnPlane = new PositionPlaneEnum();
positionOnPlaneOffset = "";
positionRotation = new PositionRotationEnum();
positionRotationOffset = "";
positionAtDepth = new PositionDepthEnum();
positionAtDepthOffset = "";
}
}
public void GetProperties()
{
ModelObjectEnumerator modelObjectEnum = model.GetModelObjectSelector().GetSelectedObjects();
if (modelObjectEnum.GetSize() == 1)
{
while (modelObjectEnum.MoveNext())
{
if (modelObjectEnum.Current is Tekla.Structures.Model.ContourPlate)
{
Tekla.Structures.Model.ContourPlate contourPlate = (Tekla.Structures.Model.ContourPlate)modelObjectEnum.Current;
TransformationPlane currentTP = new TransformationPlane();
currentTP = model.GetWorkPlaneHandler().GetCurrentTransformationPlane();
model.GetWorkPlaneHandler().SetCurrentTransformationPlane(new TransformationPlane());
contourPlate.Select();
Assembly assembly = contourPlate.GetAssembly() as Tekla.Structures.Model.Assembly;
assembly.GetReportProperty("ASSEMBLY_POSITION_CODE", ref gridLocation);
partType = contourPlate.GetType().Name;
partID = contourPlate.Identifier.ID.ToString();
contourPlate.GetReportProperty("OWNER", ref owner);
partPrefix = contourPlate.PartNumber.Prefix;
partStartNo = contourPlate.PartNumber.StartNumber.ToString();
assemblyPrefix = contourPlate.AssemblyNumber.Prefix;
assemblyStartNo = contourPlate.AssemblyNumber.StartNumber.ToString();
Phase CurrentPhase = new Phase();
contourPlate.GetPhase(out CurrentPhase);
phase = CurrentPhase.PhaseNumber.ToString();
name = contourPlate.Name;
profile = contourPlate.Profile.ProfileString;
material = contourPlate.Material.MaterialString;
finish = contourPlate.Finish;
classValue = contourPlate.Class;
if (contourPlate.Position.Plane == Position.PlaneEnum.LEFT) positionOnPlane = PositionPlaneEnum.Left;
else if (contourPlate.Position.Plane == Position.PlaneEnum.MIDDLE) positionOnPlane = PositionPlaneEnum.Middle;
else if (contourPlate.Position.Plane == Position.PlaneEnum.RIGHT) positionOnPlane = PositionPlaneEnum.Right;
positionOnPlaneOffset = contourPlate.Position.PlaneOffset.ToString("F02");
if (contourPlate.Position.Rotation == Position.RotationEnum.BACK) positionRotation = PositionRotationEnum.Back;
else if (contourPlate.Position.Rotation == Position.RotationEnum.BELOW) positionRotation = PositionRotationEnum.Below;
else if (contourPlate.Position.Rotation == Position.RotationEnum.FRONT) positionRotation = PositionRotationEnum.Front;
else if (contourPlate.Position.Rotation == Position.RotationEnum.TOP) positionRotation = PositionRotationEnum.Top;
positionRotationOffset = contourPlate.Position.RotationOffset.ToString("F02");
if (contourPlate.Position.Depth == Position.DepthEnum.BEHIND) positionAtDepth = PositionDepthEnum.Behind;
else if (contourPlate.Position.Depth == Position.DepthEnum.FRONT) positionAtDepth = PositionDepthEnum.Front;
else if (contourPlate.Position.Depth == Position.DepthEnum.MIDDLE) positionAtDepth = PositionDepthEnum.Middle;
positionAtDepthOffset = contourPlate.Position.DepthOffset.ToString("F02");
contourPlate.GetUserProperty("USER_FIELD_1", ref userfield1);
contourPlate.GetUserProperty("USER_FIELD_2", ref userfield2);
contourPlate.GetUserProperty("USER_FIELD_3", ref userfield3);
contourPlate.GetUserProperty("USER_FIELD_4", ref userfield4);
contourPlate.GetUserProperty("comment", ref notesComments);
contourPlate.GetUserProperty("FIT_NOTES", ref fittingNotes);
contourPlate.GetUserProperty("FIT_NOTES2", ref fittingNotes2);
contourPlate.GetUserProperty("cambering", ref cambering);
contourPlate.GetUserProperty("PAINT", ref paint);
contourPlate.GetUserProperty("PRELIM_MARK", ref preliminaryMark);
contourPlate.GetUserProperty("PAINT_WFT", ref paintWFT);
contourPlate.GetUserProperty("PAINT_DFT", ref paintDFT);
double dblshear1 = 0; contourPlate.GetUserProperty("shear1", ref dblshear1); dblshear1 = dblshear1 * 0.001; shearStart = dblshear1.ToString();
double dblshear2 = 0; contourPlate.GetUserProperty("shear2", ref dblshear2); dblshear2 = dblshear2 * 0.001; shearEnd = dblshear2.ToString();
double dblaxial1 = 0; contourPlate.GetUserProperty("axial1", ref dblaxial1); dblaxial1 = dblaxial1 * 0.001; axialStart = dblaxial1.ToString();
double dblaxial2 = 0; contourPlate.GetUserProperty("axial2", ref dblaxial2); dblaxial2 = dblaxial2 * 0.001; axialEnd = dblaxial2.ToString();
double dblmoment1 = 0; contourPlate.GetUserProperty("moment1", ref dblmoment1); dblmoment1 = dblmoment1 * 0.001; momentStart = dblmoment1.ToString();
double dblmoment2 = 0; contourPlate.GetUserProperty("moment2", ref dblmoment2); dblmoment2 = dblmoment2 * 0.001; momentEnd = dblmoment2.ToString();
contourPlate.GetUserProperty("CONN_CODE_END1", ref connCodeStart);
contourPlate.GetUserProperty("CONN_CODE_END2", ref connCodeEnd);
model.GetWorkPlaneHandler().SetCurrentTransformationPlane(currentTP);
}
}
}
if (modelObjectEnum.GetSize() > 1)
{
partType = "";
partID = "";
owner = "";
gridLocation = "";
partPrefix = "";
partStartNo = "";
assemblyPrefix = "";
assemblyStartNo = "";
phase = "";
name = "";
profile = "";
material = "";
finish = "";
classValue = "";
userfield1 = "";
userfield2 = "";
userfield3 = "";
userfield4 = "";
notesComments = "";
fittingNotes = "";
fittingNotes2 = "";
cambering = "";
paint = "";
preliminaryMark = "";
paintWFT = "";
paintDFT = "";
shearStart = "";
shearEnd = "";
axialStart = "";
axialEnd = "";
momentStart = "";
momentEnd = "";
connCodeStart = "";
connCodeEnd = "";
positionOnPlane = new PositionPlaneEnum();
positionOnPlaneOffset = "";
positionRotation = new PositionRotationEnum();
positionRotationOffset = "";
positionAtDepth = new PositionDepthEnum();
positionAtDepthOffset = "";
}
}
