public Result Execute(
ExternalCommandData revit,
ref string message,
ElementSet elements)
{
UIApplication uiapp = revit.Application;
UIDocument uidoc = uiapp.ActiveUIDocument;
Document doc = uidoc.Document;
Selection sel = uidoc.Selection;
Reference ref1 = sel.PickObject(
ObjectType.Element, "Please pick a floor.");
Floor f = doc.GetElement(ref1) as Floor;
if (f == null)
{
return(Result.Failed);
}
// Retrieve floor edge model line elements.
ICollection <ElementId> deleted_ids;
using (Transaction tx = new Transaction(doc))
{
tx.Start("Temporarily Delete Floor");
deleted_ids = doc.Delete(f.Id);
tx.RollBack();
}
// Grab the first floor edge model line.
ModelLine ml = null;
foreach (ElementId id in deleted_ids)
{
ml = doc.GetElement(id) as ModelLine;
if (null != ml)
{
break;
}
}
if (null != ml)
{
using (Transaction tx = new Transaction(doc))
{
tx.Start("Change Slope Angle");
// This parameter is read only. Therefore,
// the change does not work and we cannot
// change the floor slope angle after the
// floor is created.
ml.get_Parameter(
BuiltInParameter.CURVE_IS_SLOPE_DEFINING)
.Set(1);
ml.get_Parameter(
BuiltInParameter.ROOF_SLOPE)
.Set(1.2);
tx.Commit();
}
}
return(Result.Succeeded);
}
private void Stream( ArrayList data, ModelLine modelCrv )
{
data.Add( new Snoop.Data.ClassSeparator( typeof( ModelLine ) ) );
// no data at this level
}
public void Execute(UIApplication uiapp)
{
try
{
UIDocument uidoc = uiapp.ActiveUIDocument;
Document doc = uidoc.Document; // myListView_ALL_Fam_Master.Items.Add(doc.GetElement(uidoc.Selection.GetElementIds().First()).Name);
if (doc.ActiveView.GetType() != typeof(View3D))
{
MessageBox.Show("ActiveView is not typeof View3D.");
return;
}
FamilyInstance myFamilyInstance_NerfGun = null;
if (uidoc.Selection.GetElementIds().Count == 0)
{
string myString_RememberLast = doc.ProjectInformation.get_Parameter(BuiltInParameter.PROJECT_NUMBER).AsString();
int n;
if (int.TryParse(myString_RememberLast, out n))
{
myFamilyInstance_NerfGun = doc.GetElement(new ElementId(n)) as FamilyInstance;
}
}
else
{
myFamilyInstance_NerfGun = doc.GetElement(uidoc.Selection.GetElementIds().First()) as FamilyInstance;
}
if (myFamilyInstance_NerfGun == null)
{
MessageBox.Show("Please perform step 5 of 19 first." + Environment.NewLine + Environment.NewLine + "(Placing Nerf Gun)");
return;
}
/// TECHNIQUE 14 OF 19 (EE14_Draw3D_IntersectorLines.cs)
///↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓ DRAW INTERSECTOR LINES FROM NERF GUN ↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓
///
/// Interfaces and ENUM's:
/// BuiltInParameter.POINT_ELEMENT_DRIVEN
/// IFailuresPreprocessor
///
///
/// Demonstrates classes:
/// ReferencePoint
/// AdaptiveComponentInstanceUtils
/// Transform
/// TransactionGroup
/// Random*
/// ElementMulticategoryFilter
/// ReferenceIntersector
///
///
/// Key methods:
/// AdaptiveComponentInstanceUtils.GetInstancePointElementRefIds(
/// myReferencePoint.GetCoordinateSystem(
/// refIntersector.FindNearest(
/// myReferenceWithContext.GetReference(
/// uidoc.RefreshActiveView();
///
///
///
/// * class is actually part of the .NET framework (not Revit API)
///
///
/// https://github.com/joshnewzealand/Revit-API-Playpen-CSharp
uidoc.Selection.SetElementIds(new List <ElementId>());
ReferencePoint myReferencePoint = doc.GetElement(AdaptiveComponentInstanceUtils.GetInstancePointElementRefIds(myFamilyInstance_NerfGun).First()) as ReferencePoint;
Transform myTransform_FromNurfGun = myReferencePoint.GetCoordinateSystem();
using (TransactionGroup transGroup = new TransactionGroup(doc))
{
transGroup.Start("Transaction Group");
if (!myReferencePoint.get_Parameter(BuiltInParameter.POINT_ELEMENT_DRIVEN).IsReadOnly)
{
using (Transaction tx = new Transaction(doc))
{
tx.Start("Unhost");
myReferencePoint.get_Parameter(BuiltInParameter.POINT_ELEMENT_DRIVEN).Set(0);
tx.Commit();
uidoc.RefreshActiveView();
}
}
MyPreProcessor preproccessor = new MyPreProcessor();
for (int i = 1; i <= 100; i++)
{
if (i > 100)
{
MessageBox.Show("Stopped at 'i > 100' because more will cause Revit to 'freeze up'.");
break;
}
Random rnd = new Random();
OverrideGraphicSettings ogs = new OverrideGraphicSettings();
ogs.SetProjectionLineColor(new Autodesk.Revit.DB.Color((byte)rnd.Next(0, 256), (byte)rnd.Next(0, 256), (byte)rnd.Next(0, 256)));
using (Transaction tx = new Transaction(doc))
{
FailureHandlingOptions options = tx.GetFailureHandlingOptions();
options.SetFailuresPreprocessor(preproccessor);
tx.SetFailureHandlingOptions(options);
tx.Start("Splatter Gun");
Line myLine_BasisX = Line.CreateUnbound(myTransform_FromNurfGun.Origin, myTransform_FromNurfGun.BasisX);
myReferencePoint.Location.Rotate(myLine_BasisX, GetRandomNumber());
Line myLine_BasisZ = Line.CreateUnbound(myTransform_FromNurfGun.Origin, myTransform_FromNurfGun.BasisZ);
myReferencePoint.Location.Rotate(myLine_BasisZ, GetRandomNumber());
myTransform_FromNurfGun = myReferencePoint.GetCoordinateSystem();
List <BuiltInCategory> builtInCats = new List <BuiltInCategory>();
builtInCats.Add(BuiltInCategory.OST_Roofs);
builtInCats.Add(BuiltInCategory.OST_Ceilings);
builtInCats.Add(BuiltInCategory.OST_Floors);
builtInCats.Add(BuiltInCategory.OST_Walls);
builtInCats.Add(BuiltInCategory.OST_Doors);
builtInCats.Add(BuiltInCategory.OST_Windows);
builtInCats.Add(BuiltInCategory.OST_CurtainWallPanels);
builtInCats.Add(BuiltInCategory.OST_CurtainWallMullions);
ElementMulticategoryFilter intersectFilter = new ElementMulticategoryFilter(builtInCats);
ReferenceIntersector refIntersector = new ReferenceIntersector(intersectFilter, FindReferenceTarget.Face, doc.ActiveView as View3D);
ReferenceWithContext myReferenceWithContext = refIntersector.FindNearest(myTransform_FromNurfGun.Origin, myTransform_FromNurfGun.BasisZ);
if (myReferenceWithContext != null)
{
Reference myReferenceHosting_Normal = myReferenceWithContext.GetReference();
Element myElement_ContainingFace = doc.GetElement(myReferenceHosting_Normal.ElementId);
Face myFace = myElement_ContainingFace.GetGeometryObjectFromReference(myReferenceHosting_Normal) as Face;
if (myFace.GetType() != typeof(PlanarFace))
{
return; // continue;
}
Plane plane = Plane.CreateByNormalAndOrigin(myTransform_FromNurfGun.BasisX, myTransform_FromNurfGun.Origin);
SketchPlane sketchPlane = SketchPlane.Create(doc, plane);
if (myTransform_FromNurfGun.Origin.DistanceTo(myReferenceHosting_Normal.GlobalPoint) > 0.0026)//minimum lenth check
{
Line line = Line.CreateBound(myTransform_FromNurfGun.Origin, myReferenceHosting_Normal.GlobalPoint);
ModelLine myModelLine = doc.Create.NewModelCurve(line, sketchPlane) as ModelLine;
doc.ActiveView.SetElementOverrides(myModelLine.Id, ogs);
myWindow1.myListElementID_SketchPlanesToDelete.Add(sketchPlane.Id);
Transform myXYZ_FamilyTransform = Transform.Identity;
if (myReferenceHosting_Normal.ConvertToStableRepresentation(doc).Contains("INSTANCE"))
{
myXYZ_FamilyTransform = (myElement_ContainingFace as FamilyInstance).GetTotalTransform();
}
PlanarFace myPlanarFace = myFace as PlanarFace;
Transform myTransform = Transform.Identity;
myTransform.Origin = myReferenceHosting_Normal.GlobalPoint;
myTransform.BasisX = myXYZ_FamilyTransform.OfVector(myPlanarFace.XVector);
myTransform.BasisY = myXYZ_FamilyTransform.OfVector(myPlanarFace.YVector);
myTransform.BasisZ = myXYZ_FamilyTransform.OfVector(myPlanarFace.FaceNormal);
SketchPlane mySketchPlane = SketchPlane.Create(doc, myReferenceHosting_Normal);
// Create a geometry circle in Revit application
XYZ xVec = myTransform.OfVector(XYZ.BasisX);
XYZ yVec = myTransform.OfVector(XYZ.BasisY);
double startAngle2 = 0;
double endAngle2 = 2 * Math.PI;
double radius2 = 1.23;
Arc geomPlane3 = Arc.Create(myTransform.OfPoint(new XYZ(0, 0, 0)), radius2, startAngle2, endAngle2, xVec, yVec);
ModelArc arc = doc.Create.NewModelCurve(geomPlane3, mySketchPlane) as ModelArc;
//doc.Delete(sketch2.Id);
doc.ActiveView.SetElementOverrides(arc.Id, ogs);
}
}
tx.Commit();
uidoc.RefreshActiveView();
}
}
transGroup.Assimilate();
}
}
#region catch and finally
catch (Exception ex)
{
_952_PRLoogleClassLibrary.DatabaseMethods.writeDebug("EE05_Part1" + Environment.NewLine + ex.Message + Environment.NewLine + ex.InnerException, true);
}
finally
{
}
#endregion
}
public Result Execute(
ExternalCommandData commandData,
ref string message,
ElementSet elements)
{
UIApplication uiapp = commandData.Application;
UIDocument uidoc = uiapp.ActiveUIDocument;
Application app = uiapp.Application;
Document doc = uidoc.Document;
View activeView = doc.ActiveView;
//ICollection<Reference> selectedLines = uidoc.Selection.PickObjects(ObjectType.Element, "Select Lines");
Reference refFace = uidoc.Selection.PickObject(ObjectType.Face, "Select Surface");
Element selectedElement = doc.GetElement(refFace);
GeometryObject obj = selectedElement.GetGeometryObjectFromReference(refFace);
Face face = obj as Face;
ICollection <Reference> refLines = uidoc.Selection.PickObjects(ObjectType.Element, "Select Line");
Level lvl = null;
ICollection <Element> allLevels = new FilteredElementCollector(doc).OfClass(typeof(Level)).ToElements();
foreach (Level l in allLevels)
{
if (l.Name == "Level 1")
{
lvl = l;
}
}
using (Transaction t = new Transaction(doc, "test"))
{
t.Start();
foreach (Reference refLine in refLines)
{
try
{
LocationCurve locCurve = doc.GetElement(refLine.ElementId).Location as LocationCurve;
Line line = locCurve.Curve as Line;
XYZ q = line.GetEndPoint(1);
XYZ p = line.GetEndPoint(0);
XYZ v = q - p;
XYZ rayDirection = new XYZ(0, 0, 1);
XYZ normal = line.Direction.CrossProduct(rayDirection);
Plane verticalPlane = Plane.CreateByNormalAndOrigin(normal, p);
SketchPlane splane = SketchPlane.Create(doc, verticalPlane);
XYZ qProjected = ProjectPoint(doc, refFace, q, rayDirection);
XYZ pProjected = ProjectPoint(doc, refFace, p, rayDirection);
Line projectedLine = Line.CreateBound(pProjected, qProjected);
ModelLine verticalmLine = doc.Create.NewModelCurve(projectedLine, splane) as ModelLine;
}
catch (Exception ex)
{
TaskDialog.Show("result", ex.Message);
}
}
t.Commit();
}
return(Result.Succeeded);
}
void SetTangentLockInProfileSketch2(
Document famdoc,
Form[] extrusions)
{
ICollection <ElementId> delIds = null;
List <ElementId> enmIDs = new List <ElementId>();
using (SubTransaction delTrans = new SubTransaction(famdoc))
{
try
{
delTrans.Start();
delIds = famdoc.Delete(extrusions[0].Id);
delTrans.RollBack();
}
catch (Exception ex)
{
System.Windows.MessageBox.Show(ex.ToString());
}
}
// Get the model lines in the profile and use the end
// points for reference the sketch dimensions diameter
List <ModelArc> mArcsR1 = new List <ModelArc>();
List <ModelArc> mArcsR2 = new List <ModelArc>();
List <ModelLine> mLines = new List <ModelLine>();
foreach (ElementId id in delIds)
{
enmIDs.Add(id);
}
for (int i = 0; i < enmIDs.Count; i++)
{
Element ele = famdoc.GetElement(enmIDs[i]);
if (ele is ModelArc)
{
ModelArc ma = ele as ModelArc;
Curve c = ma.GeometryCurve;
Arc a = c as Arc;
if (Math.Round(r1, 6) == Math.Round(a.Radius, 6))
{
mArcsR1.Add(ma);
}
if (Math.Round(r2, 6) == Math.Round(a.Radius, 6))
{
mArcsR2.Add(ma);
}
}
if (ele is ModelLine)
{
ModelLine ml = ele as ModelLine;
ElementId beforeId = null;
ElementId afterId = null;
ISet <ElementId> joinedBefore = ml.GetAdjoinedCurveElements(0);
foreach (ElementId id in joinedBefore)
{
Element joinedEle = famdoc.GetElement(id);
if (joinedEle is ModelArc)
{
beforeId = id;
break;
}
}
ISet <ElementId> joinedAfter = ml.GetAdjoinedCurveElements(1);
foreach (ElementId id in joinedAfter)
{
Element joinedEle = famdoc.GetElement(id);
if (joinedEle is ModelArc)
{
afterId = id;
break;
}
}
if (beforeId != null &&
afterId != null &&
ml.HasTangentJoin(0, beforeId) &&
ml.HasTangentJoin(1, afterId))
{
ml.SetTangentLock(0, beforeId, true);
ml.SetTangentLock(1, afterId, true);
}
}
}
}
void SetTangentLockInProfileSketch1(
Document famdoc,
Form [] extrusions)
{
ICollection <ElementId> delIds = null;
List <ElementId> enmIDs = new List <ElementId>();
using (SubTransaction delTrans = new SubTransaction(famdoc))
{
try
{
delTrans.Start();
delIds = famdoc.Delete(extrusions[0].Id);
delTrans.RollBack();
}
catch (Exception ex)
{
System.Windows.MessageBox.Show(ex.ToString());
}
}
// Get the model lines in the profile and use the
// end points for reference the sketch dimensions diameter
List <ModelArc> mArcsR1 = new List <ModelArc>();
List <ModelArc> mArcsR2 = new List <ModelArc>();
List <ModelLine> mLines = new List <ModelLine>();
foreach (ElementId id in delIds)
{
enmIDs.Add(id);
}
for (int i = 0; i < enmIDs.Count; i++)
{
Element ele = famdoc.GetElement(enmIDs[i]);
if (ele is ModelArc)
{
ModelArc ma = ele as ModelArc;
Curve c = ma.GeometryCurve;
Arc a = c as Arc;
if (Math.Round(r1, 6) == Math.Round(a.Radius, 6))
{
mArcsR1.Add(ma);
}
if (Math.Round(r2, 6) == Math.Round(a.Radius, 6))
{
mArcsR2.Add(ma);
}
}
if (ele is ModelLine)
{
ModelLine ml = ele as ModelLine;
Element before = null;
Element after = null;
ElementId beforeId = null;
ElementId afterId = null;
if (i > 0)
{
before = famdoc.GetElement(enmIDs[i - 1]);
beforeId = enmIDs[i - 1];
}
else
{
before = famdoc.GetElement(enmIDs[enmIDs.Count - 1]);
beforeId = enmIDs[enmIDs.Count - 1];
}
if (i == enmIDs.Count - 1)
{
after = famdoc.GetElement(enmIDs[0]);
afterId = enmIDs[0];
}
else
{
after = famdoc.GetElement(enmIDs[i + 1]);
afterId = enmIDs[i + 1];
}
if (before is ModelArc && after is ModelArc)
{
ml.SetTangentLock(0, beforeId, true);
ml.SetTangentLock(1, afterId, true);
}
}
}
}
// Token: 0x06000092 RID: 146 RVA: 0x00003FDC File Offset: 0x000021DC
private void okButton_Click(object sender, EventArgs e)
{
string text = null;
SaveFileDialog saveFileDialog = new SaveFileDialog();
saveFileDialog.InitialDirectory = "c:\\";
saveFileDialog.Filter = "cs files (*.cs)|*.cs|All files (*.*)|*.*";
saveFileDialog.FilterIndex = 1;
saveFileDialog.RestoreDirectory = true;
saveFileDialog.FileName = null;
bool flag = saveFileDialog.ShowDialog() == DialogResult.OK;
if (flag)
{
try
{
Stream stream;
bool flag2 = (stream = saveFileDialog.OpenFile()) != null;
if (flag2)
{
using (stream)
{
text = saveFileDialog.FileName;
}
}
}
catch (Exception ex)
{
MessageBox.Show("Error: Could not read file. Original error: " + ex.Message);
}
}
string text2 = "_MouseOver";
string directoryName = Path.GetDirectoryName(text);
string fileNameWithoutExtension = Path.GetFileNameWithoutExtension(text);
string text3 = fileNameWithoutExtension + text2;
string path = null;
path = string.Concat(new string[]
{
directoryName,
"\\",
fileNameWithoutExtension,
text2,
".cs"
});
string arg = "using UnityEngine;\nusing System.Collections.Generic;";
string value = "";
StringBuilder stringBuilder = new StringBuilder();
bool flag3 = File.Exists(text);
if (flag3)
{
File.Delete(text);
}
bool flag4 = File.Exists(path);
if (flag4)
{
File.Delete(path);
}
List <string> list = new List <string>();
List <string> list2 = new List <string>();
List <string> list3 = new List <string>();
List <double> list4 = new List <double>();
List <string> list5 = new List <string>();
List <string> list6 = new List <string>();
List <string> list7 = new List <string>();
List <string> list8 = new List <string>();
List <string> list9 = new List <string>();
List <string> list10 = new List <string>();
List <string> list11 = new List <string>();
Hashtable hashtable = new Hashtable();
Hashtable hashtable2 = new Hashtable();
Hashtable hashtable3 = new Hashtable();
Hashtable hashtable4 = new Hashtable();
List <string> list12 = new List <string>();
Hashtable hashtable5 = new Hashtable();
try
{
Autodesk.Revit.ApplicationServices.Application application = this.p_commandData.Application.Application;
Document document = this.p_commandData.Application.ActiveUIDocument.Document;
FilteredElementCollector filteredElementCollector = new FilteredElementCollector(document);
ICollection <Element> collection = filteredElementCollector.OfClass(typeof(Wall)).ToElements();
FilteredElementCollector filteredElementCollector2 = new FilteredElementCollector(document);
ICollection <Element> collection2 = filteredElementCollector2.OfClass(typeof(View3D)).ToElements();
View3D view3D = null;
FilteredElementCollector filteredElementCollector3 = new FilteredElementCollector(document);
ICollection <Element> collection3 = filteredElementCollector3.OfClass(typeof(FamilySymbol)).ToElements();
FamilySymbol familySymbol = null;
double angle = 270.0;
double num = ExpAnimForm.DegreeToRadian(angle);
Transform transform = Transform.CreateRotation(XYZ.BasisX, num);
this.m_AllViews.ExportProperties = true;
bool flag5 = document.ActiveView.ViewType == ViewType.ThreeD & !document.ActiveView.IsTemplate;
if (flag5)
{
view3D = (document.ActiveView as View3D);
}
FilteredElementCollector filteredElementCollector4 = new FilteredElementCollector(document, view3D.Id);
ICollection <Element> collection4 = filteredElementCollector4.OfClass(typeof(FamilyInstance)).ToElements();
FamilyInstance familyInstance = null;
bool flag6 = text != null;
if (flag6)
{
foreach (Element element in collection3)
{
familySymbol = (element as FamilySymbol);
bool flag7 = familySymbol.Category != null;
if (flag7)
{
bool flag8 = string.Concat(new string[]
{
familySymbol.Category.Name,
" : ",
familySymbol.Family.Name,
" : ",
familySymbol.Name
}) == this.FamilySymbolNames;
if (flag8)
{
break;
}
}
}
foreach (Element element2 in collection4)
{
familyInstance = (element2 as FamilyInstance);
bool flag9 = familyInstance.Symbol.Id == familySymbol.Id;
if (flag9)
{
foreach (Element element3 in collection)
{
Wall wall = (Wall)element3;
bool flag10 = wall.Id == familyInstance.Host.Id;
if (flag10)
{
Wall wall2 = wall;
this.ProjY = wall2.Width;
}
}
bool flag11 = familySymbol != null;
if (flag11)
{
Document document2 = document.EditFamily(familySymbol.Family);
FilteredElementCollector filteredElementCollector5 = new FilteredElementCollector(document2);
ICollection <Element> collection5 = filteredElementCollector5.OfClass(typeof(Dimension)).ToElements();
FilteredElementCollector filteredElementCollector6 = new FilteredElementCollector(document2);
ICollection <Element> collection6 = filteredElementCollector6.OfClass(typeof(FamilyInstance)).ToElements();
FilteredElementCollector filteredElementCollector7 = new FilteredElementCollector(document2);
ICollection <Element> collection7 = filteredElementCollector7.OfClass(typeof(Wall)).ToElements();
List <ElementId> list13 = new List <ElementId>();
XYZ xyz = null;
XYZ xyz2 = null;
bool flag12 = collection6 != null;
if (flag12)
{
foreach (Element element4 in collection6)
{
bool flag13 = element4 != null;
if (flag13)
{
FamilyInstance familyInstance2 = element4 as FamilyInstance;
bool flag14 = familyInstance2.GroupId.IntegerValue.ToString() == "-1";
if (flag14)
{
list13.Add(familyInstance2.Id);
}
}
}
}
bool flag15 = document2 != null && document2.IsFamilyDocument;
if (flag15)
{
int num2 = 0;
bool flag16 = familyInstance.Category.Id.IntegerValue == -2000023;
if (flag16)
{
foreach (Element element5 in collection7)
{
Wall wall3 = (Wall)element5;
bool flag17 = wall3 != null;
if (flag17)
{
bool flag18 = num2 < 2;
if (flag18)
{
Wall wall4 = wall3;
this.FamY = wall4.Width;
num2++;
}
}
}
bool flag19 = document2.FamilyManager.Types.Size == 1;
if (flag19)
{
Transaction transaction = new Transaction(document2);
transaction.Start("Add Type");
string text4 = familyInstance.Name.ToString() + "_Anim";
document2.FamilyManager.NewType(text4);
transaction.Commit();
}
}
double num3 = (this.ProjY - this.FamY) / 2.0;
Transaction transaction2 = new Transaction(document2);
transaction2.Start("Anim Data");
foreach (object obj in document2.FamilyManager.Types)
{
FamilyType familyType = (FamilyType)obj;
bool flag20 = familyType.Name == familyInstance.Name;
if (flag20)
{
document2.FamilyManager.CurrentType = familyType;
foreach (object obj2 in document2.FamilyManager.Parameters)
{
FamilyParameter familyParameter = (FamilyParameter)obj2;
bool flag21 = familyParameter != null && !familyParameter.IsReadOnly;
if (flag21)
{
bool flag22 = familyParameter.StorageType != StorageType.ElementId && familyParameter.StorageType > 0;
if (flag22)
{
bool flag23 = familyParameter.Definition.Name.ToString() == this.FamilyParameter;
if (flag23)
{
foreach (Element element6 in collection5)
{
Dimension dimension = element6 as Dimension;
bool flag24 = dimension != null & dimension.DimensionShape == DimensionShape.Angular;
if (flag24)
{
bool flag25 = dimension.get_Parameter((BuiltInParameter)(-1004510)) != null;
if (flag25)
{
string b = dimension.get_Parameter((BuiltInParameter)(-1004510)).AsValueString().ToString();
bool flag26 = this.FamilyParameter == b;
if (flag26)
{
Curve curve = dimension.Curve;
bool flag27 = curve is Arc;
if (flag27)
{
Arc arc = curve as Arc;
xyz = arc.Center;
break;
}
}
}
}
}
bool flag28 = xyz != null;
if (flag28)
{
Transform transform2 = familyInstance.GetTransform();
bool flag29 = (familyInstance.FacingFlipped && !familyInstance.HandFlipped) || (!familyInstance.FacingFlipped && familyInstance.HandFlipped);
if (flag29)
{
transform2.BasisY = -transform2.BasisY;
}
XYZ xyz3 = transform2.OfPoint(xyz);
XYZ xyz4 = new XYZ(xyz3.X, xyz3.Y, xyz3.Z);
XYZ xyz5 = new XYZ(xyz3.X + 2.0, xyz3.Y, xyz3.Z);
xyz3 = transform.OfPoint(xyz3);
xyz3 = new XYZ(-xyz3.X, xyz3.Y, xyz3.Z);
double value2 = xyz3.X;
double value3 = xyz3.Y;
double value4 = xyz3.Z;
value2 = Math.Round(value2, this.rnd);
value3 = Math.Round(value3, this.rnd);
value4 = Math.Round(value4, this.rnd);
string text5 = value2.ToString();
string text6 = text5.Replace(",", ".");
string text7 = value3.ToString();
string text8 = text7.Replace(",", ".");
string text9 = value4.ToString();
string text10 = text9.Replace(",", ".");
string str = string.Concat(new string[]
{
text6,
"f, ",
text8,
"f, ",
text10,
"f"
});
value = "\n" + str + "\n";
Transaction transaction3 = new Transaction(document);
transaction3.Start("AddLine");
Line line = Line.CreateBound(xyz4, xyz5);
SketchPlane sketchPlane = SketchPlane.Create(document, Plane.CreateByOriginAndBasis(xyz4, XYZ.BasisX, XYZ.BasisY));
ModelLine modelLine = document.Create.NewModelCurve(line, sketchPlane) as ModelLine;
transaction3.Commit();
}
bool flag30 = xyz == null;
if (flag30)
{
foreach (ElementId elementId in list13)
{
bool flag31 = elementId != null;
if (flag31)
{
Element element7 = document2.GetElement(elementId);
FamilyInstance familyInstance3 = element7 as FamilyInstance;
foreach (object obj3 in familyInstance3.Parameters)
{
Parameter parameter = (Parameter)obj3;
bool hasValue = parameter.HasValue;
if (hasValue)
{
bool flag32 = parameter.Definition.Name == this.FamilyParameter;
if (flag32)
{
Location location = familyInstance3.Location;
LocationPoint locationPoint = location as LocationPoint;
xyz2 = locationPoint.Point;
XYZ xyz6 = new XYZ(xyz2.X, xyz2.Y + num3, xyz2.Z);
xyz2 = xyz6;
break;
}
}
}
}
}
}
bool flag33 = xyz2 != null;
if (flag33)
{
Transform transform3 = familyInstance.GetTransform();
bool flag34 = (familyInstance.FacingFlipped && !familyInstance.HandFlipped) || (!familyInstance.FacingFlipped && familyInstance.HandFlipped);
if (flag34)
{
transform3.BasisY = -transform3.BasisY;
}
XYZ xyz7 = transform3.OfPoint(xyz2);
XYZ xyz8 = new XYZ(xyz7.X, xyz7.Y, xyz7.Z);
XYZ xyz9 = new XYZ(xyz7.X + 2.0, xyz7.Y, xyz7.Z);
xyz7 = transform.OfPoint(xyz7);
xyz7 = new XYZ(-xyz7.X, xyz7.Y, xyz7.Z);
double value5 = xyz7.X;
double value6 = xyz7.Y;
double value7 = xyz7.Z;
value5 = Math.Round(value5, this.rnd);
value6 = Math.Round(value6, this.rnd);
value7 = Math.Round(value7, this.rnd);
string text11 = value5.ToString();
string text12 = text11.Replace(",", ".");
string text13 = value6.ToString();
string text14 = text13.Replace(",", ".");
string text15 = value7.ToString();
string text16 = text15.Replace(",", ".");
string str2 = string.Concat(new string[]
{
text12,
"f, ",
text14,
"f, ",
text16,
"f"
});
value = "\n" + str2 + "\n\n";
Transaction transaction4 = new Transaction(document);
transaction4.Start("AddLine");
Line line2 = Line.CreateBound(xyz8, xyz9);
SketchPlane sketchPlane2 = SketchPlane.Create(document, Plane.CreateByOriginAndBasis(xyz8, XYZ.BasisX, XYZ.BasisY));
ModelLine modelLine2 = document.Create.NewModelCurve(line2, sketchPlane2) as ModelLine;
transaction4.Commit();
}
string text17 = Convert.ToString(Convert.ToString(familyInstance.get_Parameter((BuiltInParameter)(-1002050)).AsValueString()));
string text18 = text17.Replace(" ", "_");
string str3 = text18.Replace("\"", "\\\"");
string value8 = str3 + "_Anim[" + familyInstance.Id.ToString() + "]";
stringBuilder.Append(value8);
stringBuilder.Append(value);
}
}
}
}
}
}
transaction2.Commit();
document2.Close(false);
}
}
}
}
string value9 = arg + stringBuilder;
using (StreamWriter streamWriter = new StreamWriter(path, true))
{
streamWriter.WriteLine(value9);
}
}
Transaction transaction5 = new Transaction(document);
transaction5.Start("WriteToText");
document.Regenerate();
transaction5.Commit();
base.DialogResult = DialogResult.OK;
base.Close();
}
catch (Exception ex2)
{
MessageBox.Show(ex2.Message);
}
}
Result IExternalCommand.Execute(ExternalCommandData commandData, ref string message, ElementSet elements)
{
Document revitDoc = commandData.Application.ActiveUIDocument.Document; //取得文档
Application revitApp = commandData.Application.Application; //取得应用程序
UIDocument uiDoc = commandData.Application.ActiveUIDocument; //取得当前活动文档
Document document = commandData.Application.ActiveUIDocument.Document;
Window1 window1 = new Window1();
//载入族
FamilySymbol familySymbol;
using (Transaction tran = new Transaction(uiDoc.Document))
{
tran.Start("载入族");
//载入弦杆族
string file = @"C:\Users\zyx\Desktop\2RevitArcBridge\CrossBeam\CrossBeam\source\crossBeam.rfa";
familySymbol = loadFaimly(file, commandData);
familySymbol.Activate();
tran.Commit();
}
//把这组模型线通过获取首尾点，生成dynamo里的curve
List <XYZ> ps = new List <XYZ>();
using (Transaction transaction = new Transaction(uiDoc.Document))
{
transaction.Start("选取模型线生成Curve");
Selection sel = uiDoc.Selection;
IList <Reference> modelLines = sel.PickObjects(ObjectType.Element, "选一组模型线");
foreach (Reference reference in modelLines)
{
Element elem = revitDoc.GetElement(reference);
ModelLine modelLine = elem as ModelLine;
Autodesk.Revit.DB.Curve c = modelLine.GeometryCurve;
ps.Add(c.GetEndPoint(0));
ps.Add(c.GetEndPoint(1));
}
for (int i = ps.Count - 1; i > 0; i--)
{
XYZ p1 = ps[i];
XYZ p2 = ps[i - 1];
//注意此处重合点有一个闭合差
if (p1.DistanceTo(p2) < 0.0001)
{
ps.RemoveAt(i);
}
}
transaction.Commit();
}
//做一个revit和dynamo点的转换
DG.CoordinateSystem coordinateSystem = DG.CoordinateSystem.ByOrigin(0, 0, 0);//标准坐标系
List <DG.Point> DGps = new List <DG.Point>();
foreach (XYZ p in ps)
{
DGps.Add(p.ToPoint(false));
}
DG.PolyCurve polyCurve = DG.PolyCurve.ByPoints(DGps);
DG.Curve curve = polyCurve as DG.Curve;
List <DG.Point> DGCBps = new List <DG.Point>();//横梁的放置点位列表
double StartLength = 0;
if (window1.ShowDialog() == true)
{
//窗口打开并停留，只有点击按键之后，窗口关闭并返回true
}
//按键会改变window的属性，通过对属性的循环判断来实现对按键的监测
while (!window1.Done)
{
//选择起点
if (window1.StartPointSelected)
{
using (Transaction transaction = new Transaction(uiDoc.Document))
{
transaction.Start("选择起点");
double r1 = SelectPoint(commandData);
DG.Point dgp1 = curve.PointAtParameter(r1);
DGCBps.Add(dgp1);
StartLength = curve.SegmentLengthAtParameter(r1);
transaction.Commit();
}
//2、重置window1.StartPointSelected
window1.StartPointSelected = false;
}
if (window1.ShowDialog() == true)
{
//窗口打开并停留，只有点击按键之后，窗口关闭并返回true
}
}
//在这里根据间距获取到各个点
for (int i = 1; i < window1.cbNumber; i++)
{
double L = StartLength + window1.cbDistance * i;
DG.Point point = curve.PointAtSegmentLength(L);
DGCBps.Add(point);
MessageBox.Show(i.ToString());
}
List <FamilyInstance> instances = new List <FamilyInstance>();
using (Transaction transaction = new Transaction(uiDoc.Document))
{
transaction.Start("创建横梁实例");
foreach (DG.Point p in DGCBps)
{
FamilyInstance familyInstance;
familyInstance = CreateFamlyInstance(p, curve, familySymbol, commandData);
instances.Add(familyInstance);
}
transaction.Commit();
}
//给每个族实例设置参数
using (Transaction transaction = new Transaction(uiDoc.Document))
{
transaction.Start("族实例参数设置");
foreach (FamilyInstance instance in instances)
{
double h1 = instance.LookupParameter("l1/2").AsDouble();
instance.LookupParameter("l1/2").Set(window1.l1 / 2);
instance.LookupParameter("l2").Set(window1.l2);
//instance.LookupParameter("h1").Set(window1.l1);
//instance.LookupParameter("h2").Set(window1.l1);
}
transaction.Commit();
}
return(Result.Succeeded);
}
public static void CreateEntitiesForModelLineAndSetValue(
Document doc, ModelLine line,
double height, double width, string type, ElementId id)
{
// Create Transaction for working with schema
using (Transaction trans = new Transaction(doc, "Create Extensible Store"))
{
trans.Start();
// Create a schema builder
SchemaBuilder builder = new SchemaBuilder(Guids.MODELLINE_SCHEMA_GUID);
// Set read and write access levels
builder.SetReadAccessLevel(AccessLevel.Public);
builder.SetWriteAccessLevel(AccessLevel.Public);
// Set name to this schema builder
builder.SetSchemaName("BeamDimension");
builder.SetDocumentation(
"Data store for dimension of the potential structural beam");
// Create field1
FieldBuilder fieldBuilder1 =
builder.AddSimpleField("SectionHeight", typeof(double));
// Set unit type
fieldBuilder1.SetUnitType(UnitType.UT_Length);
// Create field2
FieldBuilder fieldBuilder2 =
builder.AddSimpleField("SectionWidth", typeof(double));
// Set unit type
fieldBuilder2.SetUnitType(UnitType.UT_Length);
// Create field3
FieldBuilder fieldBuilder3 =
builder.AddSimpleField("BeamType", typeof(String));
// Create field4
FieldBuilder fieldBuilder4 =
builder.AddSimpleField("BeamId", typeof(ElementId));
// Register the schema object
Schema schema = builder.Finish();
// Now create entity (object) for this schema (class)
Entity ent = new Entity(schema);
if (null != line)
{
line.SetEntity(ent);
}
trans.Commit();
SetEntityFieldsValue(doc, line, height, width, type, id);
}
}
public override void Draw()
{
//dynDouble x = Inputs[0] as dynDouble;
//dynDouble y = Inputs[1] as dynDouble;
//dynDouble z = Inputs[2] as dynDouble;
//if (x != null && y != null && z != null)
//{
// point = new XYZ(x.D, y.D, z.D);
//}
//else
//{
// point = null;
//}
if (point != null)
{
//generate the planes
xyPlane = this.Settings.Revit.Application.Create.NewPlane(up, point);
yzPlane = this.Settings.Revit.Application.Create.NewPlane(xAxis, point);
xzPlane = this.Settings.Revit.Application.Create.NewPlane(yAxis, point);
//generate the tick lines
Line l1 = this.Settings.Revit.Application.Create.NewLineBound(point, point + up);
Line l2 = this.Settings.Revit.Application.Create.NewLineBound(point, point + xAxis);
Line l3 = this.Settings.Revit.Application.Create.NewLineBound(point, point + yAxis);
//generate the sketch planes
topSketch = this.Settings.Doc.Document.Create.NewSketchPlane(xyPlane);
lrSketch = this.Settings.Doc.Document.Create.NewSketchPlane(yzPlane);
fbSketch = this.Settings.Doc.Document.Create.NewSketchPlane(xzPlane);
ll1 = this.Settings.Doc.Document.Create.NewModelCurve(l1, lrSketch) as ModelLine;
ll2 = this.Settings.Doc.Document.Create.NewModelCurve(l2, topSketch) as ModelLine;
ll3 = this.Settings.Doc.Document.Create.NewModelCurve(l3, topSketch) as ModelLine;
if (xyPlane_out != null && yzPlane_out != null && xzPlane_out != null)
{
//update the outputs
xyPlane_out.P = xyPlane;
yzPlane_out.P = yzPlane;
xzPlane_out.P = xzPlane;
}
}
}
//override the destroy method for all point objects
public override void Destroy()
{
try
{
if (ll1 != null)
{
Settings.Doc.Document.Delete(ll1);
Settings.Doc.Document.Delete(ll2);
Settings.Doc.Document.Delete(ll3);
Settings.Doc.Document.Delete(topSketch);
Settings.Doc.Document.Delete(fbSketch);
Settings.Doc.Document.Delete(lrSketch);
ll1 = null;
ll2 = null;
ll3 = null;
topSketch = null;
fbSketch = null;
lrSketch = null;
}
if (xyPlane != null)
{
point = null;
xyPlane = null;
yzPlane = null;
xzPlane = null;
}
}
catch
{
ll1 = null;
ll2 = null;
ll3 = null;
topSketch = null;
fbSketch = null;
lrSketch = null;
point = null;
xyPlane = null;
yzPlane = null;
xzPlane = null;
}
}
public Result Execute(
ExternalCommandData commandData,
ref string message,
ElementSet elements)
{
UIApplication uiapp = commandData.Application;
UIDocument uidoc = uiapp.ActiveUIDocument;
Document doc = uidoc.Document;
Reference r = uidoc.Selection.PickObject(ObjectType.Element, "Select Element");
Options geometryOptions = new Options();
geometryOptions.ComputeReferences = false;
GeometryElement geomElem = doc.GetElement(r).get_Geometry(geometryOptions);
List <NurbSpline> cadSplines = new List <NurbSpline>();
IList <XYZ> controlPoints = new List <XYZ>();
List <double> weights = new List <double>();
List <double> knots = new List <double>();
if (null != geomElem)
{
foreach (var o in geomElem)
{
GeometryInstance gi = o as GeometryInstance;
GeometryElement instanceGeometryElement = gi.GetInstanceGeometry();
foreach (GeometryObject instanceObj in instanceGeometryElement)
{
if (instanceObj.GetType().ToString().Contains("NurbSpline"))
{
//TaskDialog.Show("r", instanceObj.GetType().ToString());
NurbSpline nurb = instanceObj as NurbSpline;
cadSplines.Add(nurb);
controlPoints = nurb.CtrlPoints;
//weights = nurb.Weights;
weights = nurb.Weights.Cast <double>().ToList();
//knots = nurb.Knots;
knots = nurb.Knots.Cast <double>().ToList();
}
break;
}
}
}
double scale = 0.3048;
#region Test
//List<XYZ> controlPoints = new List<XYZ>();
//controlPoints.Add(new XYZ(0 / scale, 0 / scale, 0 / scale));
//controlPoints.Add(new XYZ(5 / scale, 5 / scale, 2 / scale));
//controlPoints.Add(new XYZ(10 / scale, 10 / scale, 5 / scale));
//controlPoints.Add(new XYZ(15 / scale, 10 / scale, 5 / scale));
//controlPoints.Add(new XYZ(20 / scale, 5 / scale, 4 / scale));
//controlPoints.Add(new XYZ(25 / scale, 5 / scale, 3 / scale));
//List<double> weights = new List<double>();
//weights.Add(1.0);
//weights.Add(1.0);
//weights.Add(1.0);
//weights.Add(1.0);
//weights.Add(1.0);
//weights.Add(1.0);
//List<double> knots = new List<double>();
//knots.Add(0); //1revit
//knots.Add(0); //2
//knots.Add(0); //3
//knots.Add(0); //4
//knots.Add(10.76); //5
//knots.Add(21.51); //6
//knots.Add(32.27); //7
//knots.Add(32.27);
//knots.Add(32.27); //9
//knots.Add(32.27);//revit
#endregion
HermiteSpline hermspline = HermiteSpline.Create(controlPoints, false);
//Curve nurbSpline = NurbSpline.Create(hermspline);
Curve nurbSpline = NurbSpline.CreateCurve(3, knots, controlPoints, weights);
//XYZ startPoint = nurbSpline.GetEndPoint(0);
Transform nurbsTr = nurbSpline.ComputeDerivatives(0, true);
XYZ startPoint = nurbsTr.Origin;
//PrintPoint("a", nurbsTr.Origin);
#region Test Plane
//Plane geomPlane = Autodesk.Revit.DB.Plane.CreateByOriginAndBasis(nurbsTr.Origin, nurbsTr.BasisY.Normalize(), nurbsTr.BasisZ.Normalize());
//Plane geomPlane = Autodesk.Revit.DB.Plane.CreateByOriginAndBasis(nurbSpline.GetEndPoint(0), nurbsTr.BasisY.Normalize(), nurbsTr.BasisZ.Normalize());
//Frame f = new Frame(nurbSpline.GetEndPoint(0), nurbsTr.BasisY.Normalize(), nurbsTr.BasisZ.Normalize(), nurbsTr.BasisX.Normalize());
//Plane geomPlane = Autodesk.Revit.DB.Plane.CreateByThreePoints(XYZ.Zero, XYZ.BasisX, XYZ.BasisZ);
//Plane geomPlane = Plane.CreateByNormalAndOrigin(nurbsTr.BasisX.Normalize(), nurbSpline.GetEndPoint(1)); funziona
//Plane geomPlane = Plane.CreateByThreePoints(startPoint, startPoint + nurbsTr.BasisX.Normalize(), startPoint + XYZ.BasisZ);
#endregion
//XYZ curveDir = controlPoints[1] - controlPoints[0];
XYZ curveDir = nurbsTr.BasisX;
XYZ perpDir = curveDir.CrossProduct(startPoint + XYZ.BasisZ).Normalize();
Plane perpPlane = Plane.CreateByNormalAndOrigin(curveDir, startPoint);
//Plane vertPlane = Plane.CreateByThreePoints(startPoint, perpPlane.XVec, XYZ.BasisZ);
Plane vertPlane = perpPlane;
//PrintPoint("per", perpDir);
List <PtCoord> pointsCoordinates = new List <PtCoord>();
using (var form = new FormAddActiveView("Enter coordinates in clockwise order"))
{
form.ShowDialog();
//if the user hits cancel just drop out of macro
if (form.DialogResult == System.Windows.Forms.DialogResult.Cancel)
{
return(Result.Cancelled);
}
string[] inputs = form.TextString.Split(';');
foreach (string coord in inputs)
{
string[] xy = coord.Split(',');
pointsCoordinates.Add(new PtCoord(Double.Parse(xy[0]) / (scale * 1000), Double.Parse(xy[1]) / (scale * 1000)));
}
}
// List<PtCoord> pointsCoordinates = new List<PtCoord>(){new PtCoord(5,0), new PtCoord(2,2), new PtCoord(-14,0), new PtCoord(2,-2)};
List <XYZ> pts = VertexPoints(nurbsTr.Origin, pointsCoordinates, vertPlane);
XYZ pt1 = nurbsTr.Origin;
XYZ pt2 = pt1 + vertPlane.XVec * 5;
XYZ pt3 = pt2 + vertPlane.YVec * 2 + vertPlane.XVec * 2;
XYZ pt4 = pt3 - vertPlane.XVec * 12;
XYZ pt5 = pt4 - vertPlane.YVec * 2 + vertPlane.XVec * 2;
Line l1 = Line.CreateBound(pt1, pt2);
Line l2 = Line.CreateBound(pt2, pt3);
Line l3 = Line.CreateBound(pt3, pt4);
Line l4 = Line.CreateBound(pt4, pt5);
Line l5 = Line.CreateBound(pt5, pt1);
//
// var profileLoop = CurveLoop.Create(new List<Curve>{l1, l2, l3, l4, l5});
var profileLoop = LoopPoints(pts);
//double rotAngle = -2.543 * Math.PI / 180;
double rotAngle = -15 * Math.PI / 180;
var transform = Transform.CreateRotationAtPoint(nurbsTr.BasisX, rotAngle, nurbsTr.Origin);
profileLoop.Transform(transform);
var loops = new List <CurveLoop> {
profileLoop
};
var path = CurveLoop.Create(new List <Curve> {
nurbSpline
});
WireframeBuilder builder = new WireframeBuilder();
builder.AddCurve(nurbSpline);
//Solid solid = GeometryCreationUtilities.CreateSweptGeometry(path,0,nurbSpline.GetEndParameter(0),loops);
Solid solid = GeometryCreationUtilities.CreateFixedReferenceSweptGeometry(path, 0, nurbSpline.GetEndParameter(0), loops, XYZ.BasisZ);
using (Transaction t = new Transaction(doc, "create spline"))
{
t.Start();
ElementId categoryId = new ElementId(BuiltInCategory.OST_Floors);
DirectShape ds = DirectShape.CreateElement(doc, categoryId);
ds.SetShape(builder);
ds.Name = "RhinoSpline";
SketchPlane sp = SketchPlane.Create(doc, vertPlane);
uidoc.ActiveView.SketchPlane = sp;
//uidoc.ActiveView.ShowActiveWorkPlane();
ModelLine line1 = doc.Create.NewModelCurve(l1, sp) as ModelLine;
ModelLine line2 = doc.Create.NewModelCurve(l2, sp) as ModelLine;
ModelLine line3 = doc.Create.NewModelCurve(l3, sp) as ModelLine;
ModelLine line4 = doc.Create.NewModelCurve(l4, sp) as ModelLine;
ModelLine line5 = doc.Create.NewModelCurve(l5, sp) as ModelLine;
List <GeometryObject> gs = new List <GeometryObject>();
gs.Add(solid);
//DirectShape directShape = DirectShape.CreateElement(doc, categoryId);
ds.AppendShape(gs);
t.Commit();
}
return(Result.Succeeded);
}
public Result Execute(ExternalCommandData commandData, ref string message, ElementSet elements)
{
_uiapp = commandData.Application;
_uidoc = _uiapp.ActiveUIDocument;
_doc = _uidoc.Document;
// TODO : Extract GetAllStructuralLevels the methode
_strLevels =
(from l in new FilteredElementCollector(_doc)
.OfClass(typeof(Level))
where l.GetEntitySchemaGuids().Count != 0
select l)
.Cast <Level>()
.OrderBy(l => l.Elevation)
.ToList();
if (_strLevels.Count == 0)
{
TaskDialog.Show("Revit", "Configurer les niveaux structuraux avant de lancer cette commande.");
return(Result.Cancelled);
}
BeamCreationForm form = new BeamCreationForm();
if (form.ShowDialog() == System.Windows.Forms.DialogResult.OK)
{
_axeIsOnArchView = form.AxeIsOnArchView;
}
else
{
return(Result.Cancelled);
}
Transaction t = new Transaction(_doc);
// Get all the model lines created by plugin
IList <CurveElement> lines =
(from line in new FilteredElementCollector(_doc)
.OfClass(typeof(CurveElement))
.OfCategory(BuiltInCategory.OST_Lines)
.Cast <CurveElement>()
where (line as ModelLine) != null && line.GetEntitySchemaGuids().Count != 0
select line)
.ToList();
BeamFamily beamFamily = new BeamFamily(_doc);
t.Start("Create beams");
foreach (CurveElement line in lines)
{
ModelLine modelLine = line as ModelLine;
bool modelLineOnLevel = GetLevel(modelLine, out Level level);
GetParameterFromEntity(
modelLine,
out string beamSign,
out double beamHeight,
out double beamWidth,
out ElementId beamId);
if (!modelLineOnLevel)
{
continue;
}
if (LineHasRelativeBeam(modelLine, beamSign, beamHeight, beamWidth, beamId))
{
continue;
}
// TODO : Material should be choosed when creat model line
FamilySymbol beamType = beamFamily.GetBeamFamilyTypeOrCreateNew(beamSign, "Béton25", beamHeight, beamWidth);
ElementId newBeamId = PlaceBeam(line, level, beamType);
SetBeamIdToModelLine(newBeamId, modelLine).ToString();
}
t.Commit();
return(Result.Succeeded);
}
