public void ClipSegmentTests()
{
{
GCodePath inPath = Newtonsoft.Json.JsonConvert.DeserializeObject <GCodePath>("{\"config\":{\"closedLoop\":true,\"lineWidth_um\":500,\"gcodeComment\":\"WALL-OUTER\",\"speed\":18.9,\"spiralize\":false,\"doSeamHiding\":true,\"Name\":\"inset0Config\"},\"points\":[{\"x\":105366,\"y\":108976,\"z\":300},{\"x\":105743,\"y\":109188,\"z\":300},{\"x\":106352,\"y\":109582,\"z\":300},{\"x\":106606,\"y\":109674,\"z\":300},{\"x\":107513,\"y\":110120,\"z\":300},{\"x\":107766,\"y\":110836,\"z\":300},{\"x\":107804,\"y\":110986,\"z\":300},{\"x\":107806,\"y\":111124,\"z\":300},{\"x\":106720,\"y\":116034,\"z\":300},{\"x\":106669,\"y\":116205,\"z\":300},{\"x\":106345,\"y\":116505,\"z\":300},{\"x\":103152,\"y\":117619,\"z\":300},{\"x\":102975,\"y\":117661,\"z\":300},{\"x\":102749,\"y\":117546,\"z\":300},{\"x\":101132,\"y\":116186,\"z\":300},{\"x\":100997,\"y\":115990,\"z\":300},{\"x\":100845,\"y\":115704,\"z\":300},{\"x\":100673,\"y\":114777,\"z\":300},{\"x\":100959,\"y\":109833,\"z\":300},{\"x\":101785,\"y\":109149,\"z\":300},{\"x\":101836,\"y\":109129,\"z\":300},{\"x\":101976,\"y\":109137,\"z\":300},{\"x\":102415,\"y\":109277,\"z\":300},{\"x\":102712,\"y\":108910,\"z\":300},{\"x\":103239,\"y\":108477,\"z\":300},{\"x\":103355,\"y\":108453,\"z\":300},{\"x\":103710,\"y\":108924,\"z\":300},{\"x\":104116,\"y\":108883,\"z\":300},{\"x\":104330,\"y\":108371,\"z\":300},{\"x\":104867,\"y\":108245,\"z\":300},{\"x\":104888,\"y\":108273,\"z\":300},{\"x\":104980,\"y\":109145,\"z\":300}]}");
GCodePath controlPath = Newtonsoft.Json.JsonConvert.DeserializeObject <GCodePath>("{\"config\":{\"closedLoop\":true,\"lineWidth_um\":500,\"gcodeComment\":\"WALL-OUTER\",\"speed\":18.9,\"spiralize\":false,\"doSeamHiding\":true,\"Name\":\"inset0Config\"},\"points\":[{\"x\":105366,\"y\":108976,\"z\":300},{\"x\":105743,\"y\":109188,\"z\":300},{\"x\":106352,\"y\":109582,\"z\":300},{\"x\":106606,\"y\":109674,\"z\":300},{\"x\":107513,\"y\":110120,\"z\":300},{\"x\":107766,\"y\":110836,\"z\":300},{\"x\":107804,\"y\":110986,\"z\":300},{\"x\":107806,\"y\":111124,\"z\":300},{\"x\":106720,\"y\":116034,\"z\":300},{\"x\":106669,\"y\":116205,\"z\":300},{\"x\":106345,\"y\":116505,\"z\":300},{\"x\":103152,\"y\":117619,\"z\":300},{\"x\":102975,\"y\":117661,\"z\":300},{\"x\":102749,\"y\":117546,\"z\":300},{\"x\":101132,\"y\":116186,\"z\":300},{\"x\":100997,\"y\":115990,\"z\":300},{\"x\":100845,\"y\":115704,\"z\":300},{\"x\":100673,\"y\":114777,\"z\":300},{\"x\":100959,\"y\":109833,\"z\":300},{\"x\":101785,\"y\":109149,\"z\":300},{\"x\":101836,\"y\":109129,\"z\":300},{\"x\":101976,\"y\":109137,\"z\":300},{\"x\":102415,\"y\":109277,\"z\":300},{\"x\":102712,\"y\":108910,\"z\":300},{\"x\":103239,\"y\":108477,\"z\":300},{\"x\":103355,\"y\":108453,\"z\":300},{\"x\":103710,\"y\":108924,\"z\":300},{\"x\":104116,\"y\":108883,\"z\":300},{\"x\":104330,\"y\":108371,\"z\":300},{\"x\":104867,\"y\":108245,\"z\":300},{\"x\":104888,\"y\":108273,\"z\":300},{\"x\":104927,\"y\":108647,\"z\":300}]}");
long targetDistance = (long)(inPath.Config.LineWidthUM);
GCodePath testPath = LayerGCodePlanner.TrimGCodePathEnd(inPath, targetDistance);
Assert.IsTrue(controlPath.Polygon.Count == testPath.Polygon.Count);
for (int i = 0; i < controlPath.Polygon.Count; i++)
{
Assert.IsTrue(controlPath.Polygon[i] == testPath.Polygon[i]);
}
}
{
var path = new Polygon(new IntPoint[] { new IntPoint(0, 0), new IntPoint(0, 10000) });
var trimPath = path.CutToLength(7000);
Assert.AreEqual(2, trimPath.Count);
Assert.IsTrue(trimPath[1] == new IntPoint(0, 7000));
}
{
var path = new Polygon(new IntPoint[] { new IntPoint(0, 0), new IntPoint(0, 10000) });
var trimPath = path.TrimEnd(3000);
Assert.AreEqual(2, trimPath.Count);
Assert.IsTrue(trimPath[1] == new IntPoint(0, 7000));
}
{
var path = new Polygon(new IntPoint[] { new IntPoint(0, 0), new IntPoint(0, 5000), new IntPoint(0, 10000) });
var trimPath = path.TrimEnd(3000);
Assert.AreEqual(3, trimPath.Count);
Assert.IsTrue(trimPath[1] == new IntPoint(0, 5000));
Assert.IsTrue(trimPath[2] == new IntPoint(0, 7000));
}
{
var path = new Polygon(new IntPoint[] { new IntPoint(0, 0), new IntPoint(0, 5000), new IntPoint(0, 10000) });
var trimPath = path.TrimEnd(7000);
Assert.AreEqual(2, trimPath.Count);
Assert.IsTrue(trimPath[1] == new IntPoint(0, 3000));
}
{
var path = new Polygon(new IntPoint[] { new IntPoint(0, 0), new IntPoint(0, 10000) });
var trimPath = path.CutToLength(0);
Assert.AreEqual(1, trimPath.Count);
}
{
var path = new Polygon(new IntPoint[] { new IntPoint(0, 0), new IntPoint(0, 10000) });
var trimPath = path.CutToLength(20000);
Assert.AreEqual(2, trimPath.Count);
Assert.IsTrue(trimPath[1] == new IntPoint(0, 10000));
}
}
public void MergePathsIgnoringCollinearLines()
{
//GCodePath path = Newtonsoft.Json.JsonConvert.DeserializeObject<GCodePath>("{\"config\":{\"closedLoop\":true,\"lineWidth_um\":500,\"gcodeComment\":\"WALL-OUTER\",\"speed\":15.0,\"spiralize\":false,\"doSeamHiding\":true,\"Name\":\"inset0Config\"},\"points\":[{\"X\":0,\"Y\":6290,\"Width\":0,\"Z\":200},{\"X\":0,\"Y\":6290,\"Width\":0,\"Z\":200},{\"X\":0,\"Y\":6290,\"Width\":0,\"Z\":200},{\"X\":401,\"Y\":6277,\"Width\":0,\"Z\":200},{\"X\":787,\"Y\":6240,\"Width\":0,\"Z\":200},{\"X\":1185,\"Y\":6177,\"Width\":0,\"Z\":200},{\"X\":1564,\"Y\":6092,\"Width\":0,\"Z\":200},{\"X\":1944,\"Y\":5982,\"Width\":0,\"Z\":200},{\"X\":2315,\"Y\":5848,\"Width\":0,\"Z\":200},{\"X\":2671,\"Y\":5693,\"Width\":0,\"Z\":200},{\"X\":3036,\"Y\":5508,\"Width\":0,\"Z\":200},{\"X\":3369,\"Y\":5310,\"Width\":0,\"Z\":200},{\"X\":3691,\"Y\":5093,\"Width\":0,\"Z\":200}]}");
GCodePath path = Newtonsoft.Json.JsonConvert.DeserializeObject <GCodePath>("{\"config\":{\"closedLoop\":true,\"lineWidth_um\":500,\"gcodeComment\":\"WALL-OUTER\",\"speed\":15.0,\"spiralize\":false,\"doSeamHiding\":true,\"Name\":\"inset0Config\"},\"points\":[{\"X\":0,\"Y\":6290,\"Width\":0,\"Z\":200},{\"X\":0,\"Y\":6290,\"Width\":0,\"Z\":200},{\"X\":0,\"Y\":6290,\"Width\":0,\"Z\":200}]}");
bool pathIsClosed = false;
var pathsWithOverlapsRemoved = path.Polygon.MergePerimeterOverlaps(path.Config.LineWidth_um, pathIsClosed);
Assert.IsFalse(pathsWithOverlapsRemoved == null);
}
public void ClipSegmentTests()
{
GCodePath inPath = Newtonsoft.Json.JsonConvert.DeserializeObject <GCodePath>("{\"config\":{\"closedLoop\":true,\"lineWidth_um\":500,\"gcodeComment\":\"WALL-OUTER\",\"speed\":18.9,\"spiralize\":false,\"doSeamHiding\":true,\"Name\":\"inset0Config\"},\"points\":[{\"x\":105366,\"y\":108976,\"z\":300},{\"x\":105743,\"y\":109188,\"z\":300},{\"x\":106352,\"y\":109582,\"z\":300},{\"x\":106606,\"y\":109674,\"z\":300},{\"x\":107513,\"y\":110120,\"z\":300},{\"x\":107766,\"y\":110836,\"z\":300},{\"x\":107804,\"y\":110986,\"z\":300},{\"x\":107806,\"y\":111124,\"z\":300},{\"x\":106720,\"y\":116034,\"z\":300},{\"x\":106669,\"y\":116205,\"z\":300},{\"x\":106345,\"y\":116505,\"z\":300},{\"x\":103152,\"y\":117619,\"z\":300},{\"x\":102975,\"y\":117661,\"z\":300},{\"x\":102749,\"y\":117546,\"z\":300},{\"x\":101132,\"y\":116186,\"z\":300},{\"x\":100997,\"y\":115990,\"z\":300},{\"x\":100845,\"y\":115704,\"z\":300},{\"x\":100673,\"y\":114777,\"z\":300},{\"x\":100959,\"y\":109833,\"z\":300},{\"x\":101785,\"y\":109149,\"z\":300},{\"x\":101836,\"y\":109129,\"z\":300},{\"x\":101976,\"y\":109137,\"z\":300},{\"x\":102415,\"y\":109277,\"z\":300},{\"x\":102712,\"y\":108910,\"z\":300},{\"x\":103239,\"y\":108477,\"z\":300},{\"x\":103355,\"y\":108453,\"z\":300},{\"x\":103710,\"y\":108924,\"z\":300},{\"x\":104116,\"y\":108883,\"z\":300},{\"x\":104330,\"y\":108371,\"z\":300},{\"x\":104867,\"y\":108245,\"z\":300},{\"x\":104888,\"y\":108273,\"z\":300},{\"x\":104980,\"y\":109145,\"z\":300}]}");
GCodePath controlPath = Newtonsoft.Json.JsonConvert.DeserializeObject <GCodePath>("{\"config\":{\"closedLoop\":true,\"lineWidth_um\":500,\"gcodeComment\":\"WALL-OUTER\",\"speed\":18.9,\"spiralize\":false,\"doSeamHiding\":true,\"Name\":\"inset0Config\"},\"points\":[{\"x\":105366,\"y\":108976,\"z\":300},{\"x\":105743,\"y\":109188,\"z\":300},{\"x\":106352,\"y\":109582,\"z\":300},{\"x\":106606,\"y\":109674,\"z\":300},{\"x\":107513,\"y\":110120,\"z\":300},{\"x\":107766,\"y\":110836,\"z\":300},{\"x\":107804,\"y\":110986,\"z\":300},{\"x\":107806,\"y\":111124,\"z\":300},{\"x\":106720,\"y\":116034,\"z\":300},{\"x\":106669,\"y\":116205,\"z\":300},{\"x\":106345,\"y\":116505,\"z\":300},{\"x\":103152,\"y\":117619,\"z\":300},{\"x\":102975,\"y\":117661,\"z\":300},{\"x\":102749,\"y\":117546,\"z\":300},{\"x\":101132,\"y\":116186,\"z\":300},{\"x\":100997,\"y\":115990,\"z\":300},{\"x\":100845,\"y\":115704,\"z\":300},{\"x\":100673,\"y\":114777,\"z\":300},{\"x\":100959,\"y\":109833,\"z\":300},{\"x\":101785,\"y\":109149,\"z\":300},{\"x\":101836,\"y\":109129,\"z\":300},{\"x\":101976,\"y\":109137,\"z\":300},{\"x\":102415,\"y\":109277,\"z\":300},{\"x\":102712,\"y\":108910,\"z\":300},{\"x\":103239,\"y\":108477,\"z\":300},{\"x\":103355,\"y\":108453,\"z\":300},{\"x\":103710,\"y\":108924,\"z\":300},{\"x\":104116,\"y\":108883,\"z\":300},{\"x\":104330,\"y\":108371,\"z\":300},{\"x\":104867,\"y\":108245,\"z\":300},{\"x\":104888,\"y\":108273,\"z\":300},{\"x\":104927,\"y\":108647,\"z\":300}]}");
GCodePath testPath = GCodePlanner.TrimPerimeter(inPath, 0);
Assert.IsTrue(controlPath.points.Count == testPath.points.Count);
for (int i = 0; i < controlPath.points.Count; i++)
{
Assert.IsTrue(controlPath.points[i] == testPath.points[i]);
}
}
private bool RemovePerimetersThatOverlap(GCodePath path, double speed, out List<PathAndWidth> pathsWithOverlapsRemoved, bool pathIsClosed)
{
pathsWithOverlapsRemoved = null;
if (path.config.lineWidth_um > 0
&& path.points.Count > 2 // If the count is not greater than 2 there is no way it can overlap itself.
&& gcodeExport.GetPosition() == path.points[path.points.Count - 1])
{
if (RemovePerimeterOverlaps(path.points, path.config.lineWidth_um, out pathsWithOverlapsRemoved, pathIsClosed)
&& pathsWithOverlapsRemoved.Count > 0)
{
return true;
}
}
return false;
}
private static bool TrimPerimeterIfNeeded(GCodePath path, double perimeterStartEndOverlapRatio)
{
if (path.config.gcodeComment == "WALL-OUTER" || path.config.gcodeComment == "WALL-INNER")
{
long currentDistance = 0;
long targetDistance = (long)(path.config.lineWidth_um * (1-perimeterStartEndOverlapRatio));
if (path.points.Count > 1)
{
for (int pointIndex = path.points.Count - 1; pointIndex > 0; pointIndex--)
{
// Calculate distance between 2 points
currentDistance = (path.points[pointIndex] - path.points[pointIndex - 1]).Length();
// If distance exceeds clip distance:
// - Sets the new last path point
if (currentDistance > targetDistance)
{
long newDistance = currentDistance - targetDistance;
if (newDistance > 50) // Don't clip segments less than 50 um. We get too much truncation error.
{
Point3 dir = (path.points[pointIndex] - path.points[pointIndex - 1]) * newDistance / currentDistance;
Point3 clippedEndpoint = path.points[pointIndex - 1] + dir;
path.points[pointIndex] = clippedEndpoint;
}
break;
}
else if (currentDistance == targetDistance)
{
// Pops off last point because it is at the limit distance
path.points.RemoveAt(path.points.Count - 1);
break;
}
else
{
// Pops last point and reduces distance remaining to target
targetDistance -= currentDistance;
path.points.RemoveAt(path.points.Count - 1);
}
}
}
// the path was trimmed
return true;
}
return false;
}
private static void TrimPerimeterIfNeeded(GCodePath path)
{
if (path.config.name == "WALL-OUTER" || path.config.name == "WALL-INNER")
{
double currentDistance = 0;
double targetDistance = (long)(path.config.lineWidth * .90);
if (path.points.Count > 1)
{
for (int pointIndex = path.points.Count - 1; pointIndex > 0; pointIndex--)
{
// Calculate distance between 2 points
currentDistance = (path.points[pointIndex] - path.points[pointIndex - 1]).Length();
// If distance exceeds clip distance:
// - Sets the new last path point
if (currentDistance > targetDistance)
{
DoublePoint dir = new DoublePoint((path.points[pointIndex].X - path.points[pointIndex - 1].X) / currentDistance, (path.points[pointIndex].Y - path.points[pointIndex - 1].Y) / currentDistance);
double newDistance = currentDistance - targetDistance;
dir.X *= newDistance;
dir.Y *= newDistance;
IntPoint clippedEndpoint = path.points[pointIndex - 1] + new IntPoint(dir.X, dir.Y);
path.points[pointIndex] = clippedEndpoint;
break;
}
else if (currentDistance == targetDistance)
{
// Pops off last point because it is at the limit distance
path.points.RemoveAt(path.points.Count - 1);
break;
}
else
{
// Pops last point and reduces distance remaining to target
targetDistance = targetDistance - currentDistance;
path.points.RemoveAt(path.points.Count - 1);
}
}
}
}
}
private static void TrimPerimeterIfNeeded(GCodePath path)
{
if (path.config.gcodeComment == "WALL-OUTER" || path.config.gcodeComment == "WALL-INNER")
{
long currentDistance = 0;
long targetDistance = (long)(path.config.lineWidth_um * .90);
if (path.points.Count > 1)
{
for (int pointIndex = path.points.Count - 1; pointIndex > 0; pointIndex--)
{
// Calculate distance between 2 points
currentDistance = (path.points[pointIndex] - path.points[pointIndex - 1]).Length();
// If distance exceeds clip distance:
// - Sets the new last path point
if (currentDistance > targetDistance)
{
long newDistance = currentDistance - targetDistance;
Point3 dir = path.points[pointIndex] - path.points[pointIndex - 1] * newDistance / currentDistance;
Point3 clippedEndpoint = path.points[pointIndex - 1] + dir;
path.points[pointIndex] = clippedEndpoint;
break;
}
else if (currentDistance == targetDistance)
{
// Pops off last point because it is at the limit distance
path.points.RemoveAt(path.points.Count - 1);
break;
}
else
{
// Pops last point and reduces distance remaining to target
targetDistance = targetDistance - currentDistance;
path.points.RemoveAt(path.points.Count - 1);
}
}
}
}
}
private bool RemoveDoubleDrawPerimeterLines(GCodePath path, double speed)
{
return false;
if (path.config.lineWidth_um > 0
&& path.points.Count > 2 // If the count is not greater than 2 there is no way it can ovelap itself.
&& gcodeExport.GetPosition() == path.points[path.points.Count - 1])
{
List<List<Point3>> pathsWithOverlapsRemoved = GetPathsWithOverlapsRemoved(path.points, path.config.lineWidth_um / 2);
if (pathsWithOverlapsRemoved.Count > 0)
{
for (int polygonIndex = 0; polygonIndex < pathsWithOverlapsRemoved.Count; polygonIndex++)
{
int startIndex = 0;
List<Point3> polygon = pathsWithOverlapsRemoved[polygonIndex];
if (polygonIndex > 0)
{
gcodeExport.WriteMove(polygon[0], travelConfig.speed, 0);
startIndex = 1; // We skip the first point in the next extrusion, because we just moved to it.
}
for (int pointIndex = startIndex; pointIndex < polygon.Count; pointIndex++)
{
gcodeExport.WriteMove(polygon[pointIndex], speed, path.config.lineWidth_um);
}
}
}
}
}
