private static void WritePolyfaceMesh()
{
DxfDocument dxf = new DxfDocument();
List<PolyfaceMeshVertex> vertexes = new List<PolyfaceMeshVertex>
{
new PolyfaceMeshVertex(0, 0, 0),
new PolyfaceMeshVertex(10, 0, 0),
new PolyfaceMeshVertex(10, 10, 0),
new PolyfaceMeshVertex(5, 15, 0),
new PolyfaceMeshVertex(0, 10, 0)
};
List<PolyfaceMeshFace> faces = new List<PolyfaceMeshFace>
{
new PolyfaceMeshFace(new[] {1, 2, -3}),
new PolyfaceMeshFace(new[] {-1, 3, -4}),
new PolyfaceMeshFace(new[] {-1, 4, 5})
};
PolyfaceMesh mesh = new PolyfaceMesh(vertexes, faces);
dxf.AddEntity(mesh);
dxf.Save("mesh.dxf", DxfVersion.AutoCad2000);
}
private IPolyline ReadPolyline(ref CodeValuePair code)
{
string handle = string.Empty;
Layer layer = Layer.Default;
AciColor color = AciColor.ByLayer;
LineType lineType = LineType.ByLayer;
PolylineTypeFlags flags = PolylineTypeFlags.OpenPolyline;
float elevation = 0.0f;
float thickness = 0.0f;
Vector3f normal = Vector3f.UnitZ;
List<Vertex> vertexes = new List<Vertex>();
Dictionary<ApplicationRegistry, XData> xData = new Dictionary<ApplicationRegistry, XData>();
//int numVertexes = -1;
//int numFaces = -1;
code = this.ReadCodePair();
while (code.Code != 0)
{
switch (code.Code)
{
case 5:
handle = code.Value;
code = this.ReadCodePair();
break;
case 8:
layer = this.GetLayer(code.Value);
code = this.ReadCodePair();
break;
case 62:
color = new AciColor(short.Parse(code.Value));
code = this.ReadCodePair();
break;
case 6:
lineType = this.GetLineType(code.Value);
code = this.ReadCodePair();
break;
case 30:
elevation = float.Parse(code.Value);
code = this.ReadCodePair();
break;
case 39:
thickness = float.Parse(code.Value);
code = this.ReadCodePair();
break;
case 70:
flags = (PolylineTypeFlags) (int.Parse(code.Value));
code = this.ReadCodePair();
break;
case 71:
//this field might not exist for polyface meshes, we cannot depend on it
//numVertexes = int.Parse(code.Value); code = this.ReadCodePair();
code = this.ReadCodePair();
break;
case 72:
//this field might not exist for polyface meshes, we cannot depend on it
//numFaces = int.Parse(code.Value);
code = this.ReadCodePair();
break;
case 210:
normal.X = float.Parse(code.Value);
code = this.ReadCodePair();
break;
case 220:
normal.Y = float.Parse(code.Value);
code = this.ReadCodePair();
break;
case 230:
normal.Z = float.Parse(code.Value);
code = this.ReadCodePair();
break;
case 1001:
XData xDataItem = this.ReadXDataRecord(code.Value, ref code);
xData.Add(xDataItem.ApplicationRegistry, xDataItem);
break;
default:
if (code.Code >= 1000 && code.Code <= 1071)
throw new DxfInvalidCodeValueEntityException(code.Code, code.Value, this.file,
"The extended data of an entity must start with the application registry code " + this.fileLine);
code = this.ReadCodePair();
break;
}
}
//begin to read the vertex list
if (code.Value != DxfObjectCode.Vertex)
throw new DxfEntityException(DxfObjectCode.Polyline, this.file, "Vertex not found in line " + this.fileLine);
while (code.Value != StringCode.EndSequence)
{
if (code.Value == DxfObjectCode.Vertex)
{
Debug.Assert(code.Code == 0);
Vertex vertex = this.ReadVertex(ref code);
vertexes.Add(vertex);
}
}
// read the end end sequence object until a new element is found
if (code.Value != StringCode.EndSequence)
throw new DxfEntityException(DxfObjectCode.Polyline, this.file, "End sequence entity not found in line " + this.fileLine);
code = this.ReadCodePair();
string endSequenceHandle = string.Empty;
Layer endSequenceLayer = layer;
while (code.Code != 0)
{
switch (code.Code)
{
case 5:
endSequenceHandle = code.Value;
code = this.ReadCodePair();
break;
case 8:
endSequenceLayer = this.GetLayer(code.Value);
code = this.ReadCodePair();
break;
default:
code = this.ReadCodePair();
break;
}
}
IPolyline pol;
bool isClosed = false;
if ((flags & PolylineTypeFlags.ClosedPolylineOrClosedPolygonMeshInM) == PolylineTypeFlags.ClosedPolylineOrClosedPolygonMeshInM)
{
isClosed = true;
}
//to avoid possible error between the vertex type and the polyline type
//the polyline type will decide which information to use from the read vertex
if ((flags & PolylineTypeFlags.Polyline3D) == PolylineTypeFlags.Polyline3D)
{
List<Polyline3dVertex> polyline3dVertexes = new List<Polyline3dVertex>();
foreach (Vertex v in vertexes)
{
Polyline3dVertex vertex = new Polyline3dVertex
{
Color = v.Color,
Layer = v.Layer,
LineType = v.LineType,
Location = v.Location,
Handle = v.Handle
};
vertex.XData = v.XData;
polyline3dVertexes.Add(vertex);
}
////posible error avoidance, the polyline is marked as polyline3d code:(70,8) but the vertex is marked as PolylineVertex code:(70,0)
//if (v.Type == EntityType.PolylineVertex)
//{
// Polyline3dVertex polyline3dVertex = new Polyline3dVertex(((PolylineVertex)v).Location.X, ((PolylineVertex)v).Location.Y,0);
// polyline3dVertexes.Add(polyline3dVertex);
//}
//else
//{
// polyline3dVertexes.Add((Polyline3dVertex)v);
//}
//}
pol = new Polyline3d(polyline3dVertexes, isClosed)
{
Handle = handle
};
((Polyline3d) pol).EndSequence.Handle = endSequenceHandle;
((Polyline3d) pol).EndSequence.Layer = endSequenceLayer;
}
else if ((flags & PolylineTypeFlags.PolyfaceMesh) == PolylineTypeFlags.PolyfaceMesh)
{
//the vertex list created contains vertex and face information
List<PolyfaceMeshVertex> polyfaceVertexes = new List<PolyfaceMeshVertex>();
List<PolyfaceMeshFace> polyfaceFaces = new List<PolyfaceMeshFace>();
foreach (Vertex v in vertexes)
{
if ((v.Flags & (VertexTypeFlags.PolyfaceMeshVertex | VertexTypeFlags.Polygon3dMesh)) == (VertexTypeFlags.PolyfaceMeshVertex | VertexTypeFlags.Polygon3dMesh))
{
PolyfaceMeshVertex vertex = new PolyfaceMeshVertex
{
Color = v.Color,
Layer = v.Layer,
LineType = v.LineType,
Location = v.Location,
Handle = v.Handle
};
vertex.XData = xData;
polyfaceVertexes.Add(vertex);
}
else if ((v.Flags & (VertexTypeFlags.PolyfaceMeshVertex)) == (VertexTypeFlags.PolyfaceMeshVertex))
{
PolyfaceMeshFace vertex = new PolyfaceMeshFace
{
Color = v.Color,
Layer = v.Layer,
LineType = v.LineType,
VertexIndexes = v.VertexIndexes,
Handle = v.Handle
};
vertex.XData = xData;
polyfaceFaces.Add(vertex);
}
//if (v.Type == EntityType.PolyfaceMeshVertex)
//{
// polyfaceVertexes.Add((PolyfaceMeshVertex) v);
//}
//else if (v.Type == EntityType.PolyfaceMeshFace)
//{
// polyfaceFaces.Add((PolyfaceMeshFace) v);
//}
//else
//{
// throw new EntityDxfException(v.Type.ToString(), this.file, "Error in vertex type.");
//}
}
pol = new PolyfaceMesh(polyfaceVertexes, polyfaceFaces)
{
Handle = handle
};
((PolyfaceMesh) pol).EndSequence.Handle = endSequenceHandle;
((PolyfaceMesh) pol).EndSequence.Layer = endSequenceLayer;
}
else
{
List<PolylineVertex> polylineVertexes = new List<PolylineVertex>();
foreach (Vertex v in vertexes)
{
PolylineVertex vertex = new PolylineVertex
{
Location = new Vector2f(v.Location.X, v.Location.Y),
BeginThickness = v.BeginThickness,
Bulge = v.Bulge,
Color = v.Color,
EndThickness = v.EndThickness,
Layer = v.Layer,
LineType = v.LineType,
Handle = v.Handle
};
vertex.XData = xData;
////posible error avoidance, the polyline is marked as polyline code:(70,0) but the vertex is marked as Polyline3dVertex code:(70,32)
//if (v.Type==EntityType.Polyline3dVertex)
//{
// PolylineVertex polylineVertex = new PolylineVertex(((Polyline3dVertex)v).Location.X, ((Polyline3dVertex)v).Location.Y);
// polylineVertexes.Add(polylineVertex);
//}
//else
//{
// polylineVertexes.Add((PolylineVertex) v);
//}
polylineVertexes.Add(vertex);
}
pol = new Polyline(polylineVertexes, isClosed)
{
Thickness = thickness,
Elevation = elevation,
Normal = normal,
Handle = handle
};
((Polyline) pol).EndSequence.Handle = endSequenceHandle;
((Polyline) pol).EndSequence.Layer = endSequenceLayer;
}
pol.Color = color;
pol.Layer = layer;
pol.LineType = lineType;
pol.XData = xData;
return pol;
}
private void WritePolyfaceMesh(PolyfaceMesh mesh)
{
if (this.activeSection != StringCode.EntitiesSection && !this.isBlockEntities)
{
throw new InvalidDxfSectionException(this.activeSection, this.file);
}
this.WriteCodePair(0, mesh.CodeName);
this.WriteCodePair(100, SubclassMarker.Entity);
this.WriteEntityCommonCodes(mesh);
this.WriteCodePair(5, mesh.Handle);
this.WriteCodePair(100, SubclassMarker.PolyfaceMesh);
this.WriteCodePair(70, (int) mesh.Flags);
this.WriteCodePair(71, mesh.Vertexes.Count);
this.WriteCodePair(72, mesh.Faces.Count);
//dummy point
this.WriteCodePair(10, 0.0);
this.WriteCodePair(20, 0.0);
this.WriteCodePair(30, 0.0);
//Obsolete; formerly an “entities follow flag” (optional; ignore if present)
//but its needed to load the dxf file in AutoCAD
this.WriteCodePair(66, "1");
if (mesh.XData != null)
{
this.WriteXData(mesh.XData);
}
foreach (PolyfaceMeshVertex v in mesh.Vertexes)
{
this.WriteCodePair(0, v.CodeName);
this.WriteCodePair(5, v.Handle);
this.WriteCodePair(100, SubclassMarker.Entity);
this.WriteCodePair(8, v.Layer);
this.WriteCodePair(100, SubclassMarker.Vertex);
this.WriteCodePair(100, SubclassMarker.PolyfaceMeshVertex);
this.WriteCodePair(70, (int) v.Flags);
this.WriteCodePair(10, v.Location.X);
this.WriteCodePair(20, v.Location.Y);
this.WriteCodePair(30, v.Location.Z);
this.WriteXData(v.XData);
}
foreach (PolyfaceMeshFace face in mesh.Faces)
{
this.WriteCodePair(0, face.CodeName);
this.WriteCodePair(5, face.Handle);
this.WriteCodePair(100, SubclassMarker.Entity);
this.WriteCodePair(8, face.Layer);
this.WriteCodePair(100, SubclassMarker.PolyfaceMeshFace);
this.WriteCodePair(70, (int) VertexTypeFlags.PolyfaceMeshVertex);
this.WriteCodePair(10, 0);
this.WriteCodePair(20, 0);
this.WriteCodePair(30, 0);
this.WriteCodePair(71, face.VertexIndexes[0]);
this.WriteCodePair(72, face.VertexIndexes[1]);
this.WriteCodePair(73, face.VertexIndexes[2]);
}
this.WriteCodePair(0, mesh.EndSequence.CodeName);
this.WriteCodePair(5, mesh.EndSequence.Handle);
this.WriteCodePair(100, SubclassMarker.Entity);
this.WriteCodePair(8, mesh.EndSequence.Layer);
}
