protected void Reload()
{
Encryption.RNG.Reload();
// some logic in configuration updated the config when saving, we need to read it again
_config = Configuration.Load();
NLogConfig.LoadConfiguration();
privoxyRunner = privoxyRunner ?? new PrivoxyRunner();
_pacDaemon = _pacDaemon ?? new PACDaemon();
_pacDaemon.PACFileChanged += PacDaemon_PACFileChanged;
_pacDaemon.UserRuleFileChanged += PacDaemon_UserRuleFileChanged;
_pacServer = _pacServer ?? new PACServer(_pacDaemon);
_pacServer.UpdatePACURL(_config); // So PACServer works when system proxy disabled.
gfwListUpdater = gfwListUpdater ?? new GFWListUpdater();
gfwListUpdater.UpdateCompleted += PacServer_PACUpdateCompleted;
gfwListUpdater.Error += PacServer_PACUpdateError;
// don't put PrivoxyRunner.Start() before pacServer.Stop()
// or bind will fail when switching bind address from 0.0.0.0 to 127.0.0.1
// though UseShellExecute is set to true now
// http://stackoverflow.com/questions/10235093/socket-doesnt-close-after-application-exits-if-a-launched-process-is-open
privoxyRunner.Stop();
_pacServer.Stop();
try
{
privoxyRunner.Start(this, _config);
_pacServer.Start(_config);
}
catch (Exception e)
{
// translate Microsoft language into human language
// i.e. An attempt was made to access a socket in a way forbidden by its access permissions => Port already in use
if (e is SocketException se)
{
if (se.SocketErrorCode == SocketError.AddressAlreadyInUse)
{
e = new Exception(I18N.GetString("Port {0} already in use", _config.localPort), e);
}
else if (se.SocketErrorCode == SocketError.AccessDenied)
{
e = new Exception(I18N.GetString("Port {0} is reserved by system", _config.localPort), e);
}
}
logger.LogUsefulException(e);
ReportError(e);
}
ConfigChanged?.Invoke(this, new EventArgs());
UpdateSystemProxy();
Utils.ReleaseMemory(true);
}
private void ReloadPacServer()
{
if (_pacDaemon == null)
{
_pacDaemon = new PACDaemon();
_pacDaemon.PACFileChanged += (o, args) =>
{
_pacServer?.UpdatePacUrl(Global.GuiConfig);
UpdateSystemProxy();
};
_pacDaemon.UserRuleFileChanged += PacDaemon_UserRuleFileChanged;
}
if (_pacServer == null)
{
_pacServer = new PACServer(_pacDaemon);
}
_pacServer.UpdatePacUrl(Global.GuiConfig);
}
protected void Reload()
{
Encryption.RNG.Reload();
// some logic in configuration updated the config when saving, we need to read it again
_config = Configuration.Load();
NLogConfig.LoadConfiguration();
StatisticsConfiguration = StatisticsStrategyConfiguration.Load();
privoxyRunner = privoxyRunner ?? new PrivoxyRunner();
_pacDaemon = _pacDaemon ?? new PACDaemon(_config);
_pacDaemon.PACFileChanged += PacDaemon_PACFileChanged;
_pacDaemon.UserRuleFileChanged += PacDaemon_UserRuleFileChanged;
_pacServer = _pacServer ?? new PACServer(_pacDaemon);
_pacServer.UpdatePACURL(_config); // So PACServer works when system proxy disabled.
GeositeUpdater.ResetEvent();
GeositeUpdater.UpdateCompleted += PacServer_PACUpdateCompleted;
GeositeUpdater.Error += PacServer_PACUpdateError;
availabilityStatistics.UpdateConfiguration(this);
_listener?.Stop();
StopPlugins();
// don't put PrivoxyRunner.Start() before pacServer.Stop()
// or bind will fail when switching bind address from 0.0.0.0 to 127.0.0.1
// though UseShellExecute is set to true now
// http://stackoverflow.com/questions/10235093/socket-doesnt-close-after-application-exits-if-a-launched-process-is-open
privoxyRunner.Stop();
try
{
var strategy = GetCurrentStrategy();
strategy?.ReloadServers();
StartPlugin();
privoxyRunner.Start(_config);
TCPRelay tcpRelay = new TCPRelay(this, _config);
tcpRelay.OnConnected += UpdateLatency;
tcpRelay.OnInbound += UpdateInboundCounter;
tcpRelay.OnOutbound += UpdateOutboundCounter;
tcpRelay.OnFailed += (o, e) => GetCurrentStrategy()?.SetFailure(e.server);
UDPRelay udpRelay = new UDPRelay(this);
List <Listener.IService> services = new List <Listener.IService>
{
tcpRelay,
udpRelay,
_pacServer,
new PortForwarder(privoxyRunner.RunningPort)
};
_listener = new Listener(services);
_listener.Start(_config);
}
catch (Exception e)
{
// translate Microsoft language into human language
// i.e. An attempt was made to access a socket in a way forbidden by its access permissions => Port already in use
if (e is SocketException se)
{
if (se.SocketErrorCode == SocketError.AddressAlreadyInUse)
{
e = new Exception(I18N.GetString("Port {0} already in use", _config.localPort), e);
}
else if (se.SocketErrorCode == SocketError.AccessDenied)
{
e = new Exception(I18N.GetString("Port {0} is reserved by system", _config.localPort), e);
}
}
logger.LogUsefulException(e);
ReportError(e);
}
ConfigChanged?.Invoke(this, new EventArgs());
UpdateSystemProxy();
Utils.ReleaseMemory(true);
}
private void Reload()
{
if (_port_map_listener != null)
{
foreach (var l in _port_map_listener)
{
l.Stop();
}
_port_map_listener = null;
}
// some logic in configuration updated the config when saving, we need to read it again
_config = MergeGetConfiguration(_config);
_config.FlushPortMapCache();
Logging.save_to_file = _config.logEnable;
Logging.OpenLogFile();
ReloadIPRange();
var hostMap = new HostMap();
hostMap.LoadHostFile();
HostMap.Instance().Clear(hostMap);
GlobalConfiguration.OSSupportsLocalIPv6 = Socket.OSSupportsIPv6;
if (privoxyRunner == null)
{
privoxyRunner = new HttpProxyRunner();
}
if (_pacDaemon == null)
{
_pacDaemon = new PACDaemon();
_pacDaemon.PACFileChanged += PacDaemon_PACFileChanged;
_pacDaemon.UserRuleFileChanged += PacDaemon_UserRuleFileChanged;
}
if (_pacServer == null)
{
_pacServer = new PACServer(_pacDaemon);
}
_pacServer.UpdatePacUrl(_config);
if (gfwListUpdater == null)
{
gfwListUpdater = new GFWListUpdater();
gfwListUpdater.UpdateCompleted += pacServer_PACUpdateCompleted;
gfwListUpdater.Error += pacServer_PACUpdateError;
}
if (chnDomainsAndIPUpdater == null)
{
chnDomainsAndIPUpdater = new ChnDomainsAndIPUpdater();
chnDomainsAndIPUpdater.UpdateCompleted += pacServer_PACUpdateCompleted;
chnDomainsAndIPUpdater.Error += pacServer_PACUpdateError;
}
_listener?.Stop();
privoxyRunner.Stop();
// don't put privoxyRunner.Start() before pacServer.Stop()
// or bind will fail when switching bind address from 0.0.0.0 to 127.0.0.1
// though UseShellExecute is set to true now
// http://stackoverflow.com/questions/10235093/socket-doesnt-close-after-application-exits-if-a-launched-process-is-open
try
{
privoxyRunner.Start(_config);
var local = new Local(_config, _transfer, _rangeSet);
var services = new List <Listener.IService>
{
local,
_pacServer,
new APIServer(this, _config),
new HttpPortForwarder(privoxyRunner.RunningPort, _config)
};
_listener = new Listener(services);
_listener.Start(_config, 0);
}
catch (Exception e)
{
// translate Microsoft language into human language
// i.e. An attempt was made to access a socket in a way forbidden by its access permissions => Port already in use
if (e is SocketException se)
{
switch (se.SocketErrorCode)
{
case SocketError.AddressAlreadyInUse:
{
e = new Exception(string.Format(I18NUtil.GetAppStringValue(@"PortInUse"), _config.localPort), se);
break;
}
case SocketError.AccessDenied:
{
e = new Exception(string.Format(I18NUtil.GetAppStringValue(@"PortReserved"), _config.localPort), se);
break;
}
}
}
Logging.LogUsefulException(e);
ReportError(e);
}
_port_map_listener = new List <Listener>();
foreach (var pair in _config.GetPortMapCache())
{
try
{
var local = new Local(_config, _transfer, _rangeSet);
var services = new List <Listener.IService> {
local
};
var listener = new Listener(services);
listener.Start(_config, pair.Key);
_port_map_listener.Add(listener);
}
catch (Exception e)
{
// translate Microsoft language into human language
// i.e. An attempt was made to access a socket in a way forbidden by its access permissions => Port already in use
if (e is SocketException se)
{
if (se.SocketErrorCode == SocketError.AddressAlreadyInUse)
{
e = new Exception(string.Format(I18NUtil.GetAppStringValue(@"PortInUse"), pair.Key), e);
}
else if (se.SocketErrorCode == SocketError.AccessDenied)
{
e = new Exception(string.Format(I18NUtil.GetAppStringValue(@"PortReserved"), pair.Key), se);
}
}
Logging.LogUsefulException(e);
ReportError(e);
}
}
Application.Current.Dispatcher?.Invoke(() => { ConfigChanged?.Invoke(this, new EventArgs()); });
UpdateSystemProxy();
Utils.ReleaseMemory();
}
public void Reload()
{
if (_port_map_listener != null)
{
foreach (var l in _port_map_listener)
{
l.Stop();
}
_port_map_listener = null;
}
// some logic in configuration updated the config when saving, we need to read it again
_config = MergeGetConfiguration(_config);
_config.FlushPortMapCache();
Logging.SaveToFile = _config.logEnable;
Logging.OpenLogFile();
if (_hostDaemon == null)
{
_hostDaemon = new HostDaemon();
_hostDaemon.ChnIpChanged += (o, args) => ReloadIPRange();
_hostDaemon.UserRuleChanged += (o, args) => HostMap.Reload();
}
ReloadIPRange();
HostMap.Reload();
GlobalConfiguration.OSSupportsLocalIPv6 = Socket.OSSupportsIPv6;
if (privoxyRunner == null)
{
privoxyRunner = new HttpProxyRunner();
}
if (_pacDaemon == null)
{
_pacDaemon = new PACDaemon();
_pacDaemon.PACFileChanged += (o, args) => UpdateSystemProxy();
_pacDaemon.UserRuleFileChanged += PacDaemon_UserRuleFileChanged;
}
if (_pacServer == null)
{
_pacServer = new PACServer(_pacDaemon);
}
_pacServer.UpdatePacUrl(_config);
if (gfwListUpdater == null)
{
gfwListUpdater = new GfwListUpdater();
gfwListUpdater.UpdateCompleted += (o, args) => UpdatePACFromGFWListCompleted?.Invoke(o, args);
gfwListUpdater.Error += (o, args) => UpdatePACFromGFWListError?.Invoke(o, args);
}
_listener?.Stop();
privoxyRunner.Stop();
// don't put privoxyRunner.Start() before pacServer.Stop()
// or bind will fail when switching bind address from 0.0.0.0 to 127.0.0.1
// though UseShellExecute is set to true now
// http://stackoverflow.com/questions/10235093/socket-doesnt-close-after-application-exits-if-a-launched-process-is-open
try
{
privoxyRunner.Start(_config);
var local = new Local(_config, _transfer, _chnRangeSet);
var services = new List <Listener.IService>
{
local,
_pacServer,
new HttpPortForwarder(privoxyRunner.RunningPort, _config)
};
_listener = new Listener(services);
_listener.Start(_config, 0);
}
catch (Exception e)
{
ThrowSocketException(ref e);
Logging.LogUsefulException(e);
ReportError(e);
}
_port_map_listener = new List <Listener>();
foreach (var pair in _config.GetPortMapCache())
{
try
{
var local = new Local(_config, _transfer, _chnRangeSet);
var services = new List <Listener.IService> {
local
};
var listener = new Listener(services);
listener.Start(_config, pair.Key);
_port_map_listener.Add(listener);
}
catch (Exception e)
{
ThrowSocketException(ref e);
Logging.LogUsefulException(e);
ReportError(e);
}
}
Application.Current.Dispatcher?.Invoke(() => { ConfigChanged?.Invoke(this, new EventArgs()); });
UpdateSystemProxy();
Utils.ReleaseMemory();
}
public PACServer(PACDaemon pacDaemon)
{
_pacDaemon = pacDaemon;
}
protected void Reload()
{
Encryption.RNG.Reload();
// some logic in configuration updated the config when saving, we need to read it again
_config = Configuration.Load();
Configuration.Process(ref _config);
NLogConfig.LoadConfiguration();
logger.Info($"WPF Localization Extension|Current culture: {LocalizeDictionary.CurrentCulture}");
// set User-Agent for httpClient
try
{
if (!string.IsNullOrWhiteSpace(_config.userAgentString))
{
httpClient.DefaultRequestHeaders.Add("User-Agent", _config.userAgentString);
}
}
catch
{
// reset userAgent to default and reapply
Configuration.ResetUserAgent(_config);
httpClient.DefaultRequestHeaders.Add("User-Agent", _config.userAgentString);
}
privoxyRunner = privoxyRunner ?? new PrivoxyRunner();
_pacDaemon = _pacDaemon ?? new PACDaemon(_config);
_pacDaemon.PACFileChanged += PacDaemon_PACFileChanged;
_pacDaemon.UserRuleFileChanged += PacDaemon_UserRuleFileChanged;
_pacServer = _pacServer ?? new PACServer(_pacDaemon);
_pacServer.UpdatePACURL(_config); // So PACServer works when system proxy disabled.
GeositeUpdater.ResetEvent();
GeositeUpdater.UpdateCompleted += PacServer_PACUpdateCompleted;
GeositeUpdater.Error += PacServer_PACUpdateError;
_tcpListener?.Stop();
_udpListener?.Stop();
StopPlugins();
// don't put PrivoxyRunner.Start() before pacServer.Stop()
// or bind will fail when switching bind address from 0.0.0.0 to 127.0.0.1
// though UseShellExecute is set to true now
// http://stackoverflow.com/questions/10235093/socket-doesnt-close-after-application-exits-if-a-launched-process-is-open
privoxyRunner.Stop();
try
{
var strategy = GetCurrentStrategy();
strategy?.ReloadServers();
StartPlugin();
privoxyRunner.Start(_config);
TCPRelay tcpRelay = new TCPRelay(this, _config);
tcpRelay.OnInbound += UpdateInboundCounter;
tcpRelay.OnOutbound += UpdateOutboundCounter;
tcpRelay.OnFailed += (o, e) => GetCurrentStrategy()?.SetFailure(e.server);
UDPRelay udpRelay = new UDPRelay(this);
_tcpListener = new TCPListener(_config, new List <IStreamService>
{
tcpRelay,
_pacServer,
new PortForwarder(privoxyRunner.RunningPort),
});
_tcpListener.Start();
_udpListener = new UDPListener(_config, new List <IDatagramService>
{
udpRelay,
});
_udpListener.Start();
}
catch (Exception e)
{
// translate Microsoft language into human language
// i.e. An attempt was made to access a socket in a way forbidden by its access permissions => Port already in use
if (e is SocketException se)
{
if (se.SocketErrorCode == SocketError.AddressAlreadyInUse)
{
e = new Exception(I18N.GetString("Port {0} already in use", _config.localPort), e);
}
else if (se.SocketErrorCode == SocketError.AccessDenied)
{
e = new Exception(I18N.GetString("Port {0} is reserved by system", _config.localPort), e);
}
}
logger.LogUsefulException(e);
ReportError(e);
}
ConfigChanged?.Invoke(this, new EventArgs());
UpdateSystemProxy();
}
