/// <summary> /// Draws the panel. /// </summary> /// <param name="xLowerBound">The x lower bound.</param> /// <param name="xUpperBound">The x upper bound.</param> /// <param name="yLowerBound">The y lower bound.</param> /// <param name="yUpperBound">The y upper bound.</param> /// <param name="panel">The panel.</param> /// <param name="para">The para.</param> public static void drawPanel(double xLowerBound, double xUpperBound, double yLowerBound, double yUpperBound, PerforationPanel panel, PanelParameters para) { RhinoDoc doc = RhinoDoc.ActiveDoc; List <Guid> guidList = new List <Guid>(); // Create a new layer called Panel Perimeter string layerName = "PANEL PERIMETER"; // Does a layer with the same name already exist? int layerIndex = doc.Layers.Find(layerName, true); // If layer does not exist if (layerIndex == -1) { // Add a new layer to the document layerIndex = doc.Layers.Add(layerName, System.Drawing.Color.Black); } doc.Layers.SetCurrentLayerIndex(layerIndex, true); // Bottom and left justified the panels in the grid double panelX0 = xLowerBound; double panelX1 = panelX0 + panel.X; double panelY0 = yUpperBound; double panelY1 = panelY0 + panel.Y; // Position the panel to be in the middle of the grid //double panelX0 = xLowerBound + ((xUpperBound - xLowerBound) - panel.X) /2 ; //double panelX1 = panelX0 + panel.X; //double panelY1 = yLowerBound - ((yLowerBound - yUpperBound) - panel.Y) / 2; //double panelY0 = panelY1 - panel.Y; BoundingBox panelBox = new BoundingBox(panelX0, panelY0, 0, panelX1, panelY1, 0); List <Point3d> rectangle_corners = panelBox.GetCorners().Distinct().ToList(); // add 1st point at last to close the loop rectangle_corners.Add(rectangle_corners[0]); panel.Perimeter = doc.Objects.AddPolyline(rectangle_corners); guidList.Add(panel.Perimeter); // Create a new layer called Border layerName = "BORDERS"; // Does a layer with the same name already exist? layerIndex = doc.Layers.Find(layerName, true); // If layer does not exist if (layerIndex == -1) { // Add a new layer to the document layerIndex = doc.Layers.Add(layerName, System.Drawing.Color.Purple); } doc.Layers.SetCurrentLayerIndex(layerIndex, true); double borderX0 = panelX0 + panel.LeftBorder; double borderY0 = panelY0 + panel.BottomBorder; double borderX1 = panelX1 - panel.RightBorder; double borderY1 = panelY1 - panel.TopBorder; panelBox = new BoundingBox(borderX0, borderY0, 0, borderX1, borderY1, 0); rectangle_corners = panelBox.GetCorners().Distinct().ToList(); // add 1st point at last to close the loop rectangle_corners.Add(rectangle_corners[0]); panel.Border = doc.Objects.AddPolyline(rectangle_corners); guidList.Add(panel.Border); // Create a new layer called LABELS layerName = "LABELS"; // Does a layer with the same name already exist? layerIndex = doc.Layers.Find(layerName, true); // If layer does not exist if (layerIndex == -1) { // Add a new layer to the document layerIndex = doc.Layers.Add(layerName, System.Drawing.Color.Red); } doc.Layers.SetCurrentLayerIndex(layerIndex, true); Rhino.Geometry.Point3d pt = new Rhino.Geometry.Point3d(borderX0, borderY0, 0); string text = panel.PartName; double height = para.LabelHeight; const string font = "Arial"; Rhino.Geometry.Plane plane = doc.Views.ActiveView.ActiveViewport.ConstructionPlane(); plane.Origin = pt; panel.Label = doc.Objects.AddText(text, plane, height, font, false, false); guidList.Add(panel.Label); // If Dot font needs to be drawn if (para.DotFont == 1) { // Create a new layer called DOTS layerName = "DOTS"; // Does a layer with the same name already exist? layerIndex = doc.Layers.Find(layerName, true); // If layer does not exist if (layerIndex == -1) { // Add a new layer to the document layerIndex = doc.Layers.Add(layerName, System.Drawing.Color.Black); } doc.Layers.SetCurrentLayerIndex(layerIndex, true); // Put in the Dot Matrix Label // Draw at the right side of the border aand 10mm from the bottom and 100mm from the left edge pt = new Point3d(panelX1 - 100, panelY0 + 5, 0); DotMatrixLabellerCommand.Instance.drawDotMatrix(pt, panel.PartName, Properties.Settings.Default.DotMatrixHeight, panel.X); } if (para.PatternDirection == 1) { // Export the selected curves RhinoApp.RunScript("SelAll", true); RhinoApp.RunScript("-_Rotate 0,0,0 90", true); } PerforationForm perforationForm = new PerforationForm(new Rhino.DocObjects.ObjRef(panel.Border).Curve()); perforationForm.drawPerforationDesign(panel.PatternName, true); if (para.PatternDirection == 1) { // Export the selected curves RhinoApp.RunScript("SelAll", true); RhinoApp.RunScript("-_Rotate 0,0,0 -90", true); } // Draw Dimension // Find the Dimension Style // Create a new layer called DIMENSION layerName = "DIMENSION"; // Does a layer with the same name already exist? layerIndex = doc.Layers.Find(layerName, true); // If layer does not exist if (layerIndex == -1) { // Add a new layer to the document layerIndex = doc.Layers.Add(layerName, System.Drawing.Color.Black); } doc.Layers.SetCurrentLayerIndex(layerIndex, true); // Add the word perforated area to the panel pt = new Rhino.Geometry.Point3d(((borderX1 + borderX0) / 2) - 117.5, ((borderY1 + borderY0) / 2) + 33, 0); text = "PERFORATED \nAREA"; height = para.LabelHeight / 2; plane.Origin = pt; Guid perforatedAreaLabel = doc.Objects.AddText(text, plane, height, font, false, false); guidList.Add(perforatedAreaLabel); DimensionStyle dimStyle = doc.DimStyles.Find("Metrix Real", true); int dimStyleIndex = 0; if (dimStyle == null) { dimStyleIndex = doc.DimStyles.Add("Metrix Real"); dimStyle = doc.DimStyles.Find("Metrix Real", true); } else { dimStyleIndex = dimStyle.Index; } dimStyle.TextHeight = 40; dimStyle.TextGap = 25; dimStyle.ExtensionLineExtension = 25; dimStyle.ExtensionLineOffset = 25; dimStyle.LengthResolution = 0; dimStyle.AngleResolution = 0; dimStyle.ArrowLength = 25; dimStyle.LeaderArrowLength = 25; dimStyle.FitText = DimensionStyle.TextFit.TextInside; dimStyle.FixedExtensionLength = 25; dimStyle.FixedExtensionOn = true; dimStyle.DimRadialTextLocation = DimensionStyle.TextLocation.AboveDimLine; doc.DimStyles.Modify(dimStyle, dimStyleIndex, false); dimStyle.LeaderTextVerticalAlignment = TextVerticalAlignment.Middle; doc.DimStyles.SetCurrent(dimStyleIndex, false); // Add horizontal dimension Point3d origin = new Point3d(panelX1, panelY0, 0); Point3d offset = new Point3d(panelX0, panelY0, 0); pt = new Point3d((offset.X - origin.X) / 2, panelY0 - (dimStyle.TextHeight * 4), 0); plane = Plane.WorldXY; plane.Origin = origin; double u, v; plane.ClosestParameter(origin, out u, out v); Point2d ext1 = new Point2d(u, v); plane.ClosestParameter(offset, out u, out v); Point2d ext2 = new Point2d(u, v); plane.ClosestParameter(pt, out u, out v); Point2d linePt = new Point2d(u, v); LinearDimension dimension = new LinearDimension(plane, ext1, ext2, linePt); Guid dimGuid = doc.Objects.AddLinearDimension(dimension); guidList.Add(dimGuid); // Add horizontal borders dimension origin = new Point3d(panelX0, panelY0, 0); offset = new Point3d(borderX0, panelY0, 0); pt = new Point3d((offset.X - origin.X) / 2, panelY0 - (dimStyle.TextHeight * 2), 0); plane.ClosestParameter(origin, out u, out v); ext1 = new Point2d(u, v); plane.ClosestParameter(offset, out u, out v); ext2 = new Point2d(u, v); plane.ClosestParameter(pt, out u, out v); linePt = new Point2d(u, v); dimension = new LinearDimension(plane, ext1, ext2, linePt); dimGuid = doc.Objects.AddLinearDimension(dimension); guidList.Add(dimGuid); // Add horizontal borders dimension origin = new Point3d(panelX1, panelY0, 0); offset = new Point3d(borderX1, panelY0, 0); pt = new Point3d((offset.X - origin.X) / 2, panelY0 - (dimStyle.TextHeight * 2), 0); plane.ClosestParameter(origin, out u, out v); ext1 = new Point2d(u, v); plane.ClosestParameter(offset, out u, out v); ext2 = new Point2d(u, v); plane.ClosestParameter(pt, out u, out v); linePt = new Point2d(u, v); dimension = new LinearDimension(plane, ext1, ext2, linePt); dimGuid = doc.Objects.AddLinearDimension(dimension); guidList.Add(dimGuid); // Add vertical dimension for panel origin = new Point3d(panelX0, panelY0, 0); offset = new Point3d(panelX0, panelY1, 0); pt = new Point3d(panelX0 - (dimStyle.TextHeight * 4), (offset.Y - origin.Y) / 2, 0); plane = Plane.WorldXY; plane.XAxis = new Vector3d(0, -1, 0); plane.YAxis = new Vector3d(-1, 0, 0); plane.ZAxis = new Vector3d(0, 0, -1); plane.Origin = origin; plane.ClosestParameter(origin, out u, out v); ext1 = new Point2d(u, v); plane.ClosestParameter(offset, out u, out v); ext2 = new Point2d(u, v); plane.ClosestParameter(pt, out u, out v); linePt = new Point2d(u, v); dimension = new LinearDimension(plane, ext1, ext2, linePt); dimGuid = doc.Objects.AddLinearDimension(dimension); guidList.Add(dimGuid); // Add vertical dimension for panel origin = new Point3d(panelX0, panelY0, 0); offset = new Point3d(panelX0, borderY0, 0); pt = new Point3d(panelX0 - (dimStyle.TextHeight * 2), (offset.Y - origin.Y) / 2, 0); plane = Plane.WorldXY; plane.XAxis = new Vector3d(0, -1, 0); plane.YAxis = new Vector3d(-1, 0, 0); plane.ZAxis = new Vector3d(0, 0, -1); plane.Origin = origin; plane.ClosestParameter(origin, out u, out v); ext1 = new Point2d(u, v); plane.ClosestParameter(offset, out u, out v); ext2 = new Point2d(u, v); plane.ClosestParameter(pt, out u, out v); linePt = new Point2d(u, v); dimension = new LinearDimension(plane, ext1, ext2, linePt); dimGuid = doc.Objects.AddLinearDimension(dimension); guidList.Add(dimGuid); origin = new Point3d(panelX0, panelY1, 0); offset = new Point3d(panelX0, borderY1, 0); pt = new Point3d(panelX0 - (dimStyle.TextHeight * 2), (offset.Y - origin.Y) / 2, 0); plane = Plane.WorldXY; plane.XAxis = new Vector3d(0, -1, 0); plane.YAxis = new Vector3d(-1, 0, 0); plane.ZAxis = new Vector3d(0, 0, -1); plane.Origin = origin; plane.ClosestParameter(origin, out u, out v); ext1 = new Point2d(u, v); plane.ClosestParameter(offset, out u, out v); ext2 = new Point2d(u, v); plane.ClosestParameter(pt, out u, out v); linePt = new Point2d(u, v); dimension = new LinearDimension(plane, ext1, ext2, linePt); dimGuid = doc.Objects.AddLinearDimension(dimension); guidList.Add(dimGuid); doc.Views.Redraw(); RhinoObject panelPerimeterObj = doc.Objects.Find(panel.Perimeter); // Select all objects on Perforation Layer Rhino.DocObjects.RhinoObject[] rhinoObjs = doc.Objects.FindByLayer(Properties.Settings.Default.PerforationLayerName); double tolerance = Properties.Settings.Default.Tolerance; Rhino.Geometry.Curve panelPerimeterCurve = panelPerimeterObj.Geometry as Rhino.Geometry.Curve; // If tool perforation layer is missing if (rhinoObjs == null) { // Select all objects on Perforation Layer rhinoObjs = doc.Objects.FindByLayer(Properties.Settings.Default.ToolHitLayerName); } if (Convert.ToBoolean(panel.DrawPerf) == true && rhinoObjs != null) { foreach (RhinoObject rhinoObj in rhinoObjs) { Rhino.Geometry.Curve testCurve = rhinoObj.Geometry as Rhino.Geometry.Curve; if (testCurve != null) { if (Curve.PlanarClosedCurveRelationship(panelPerimeterCurve, testCurve, Plane.WorldXY, tolerance) == RegionContainment.BInsideA) { guidList.Add(rhinoObj.Id); } } } } // Export the panel doc.Objects.UnselectAll(); doc.Objects.Select(panel.Perimeter); // Get all of the objects on the layer. If layername is bogus, you will // just get an empty list back Rhino.DocObjects.RhinoObject label = doc.Objects.Find(panel.Label); string exportFileName = "1"; if (label != null) { label.Select(true); Rhino.Geometry.TextEntity textentity = label.Geometry as Rhino.Geometry.TextEntity; exportFileName = textentity.Text + ".dxf"; } // Select all objects on DOTS Layer rhinoObjs = doc.Objects.FindByLayer("DOTS"); tolerance = Properties.Settings.Default.Tolerance; panelPerimeterCurve = panelPerimeterObj.Geometry as Rhino.Geometry.Curve; if (rhinoObjs != null) { foreach (RhinoObject rhinoObj in rhinoObjs) { Rhino.Geometry.Curve testCurve = rhinoObj.Geometry as Rhino.Geometry.Curve; if (testCurve != null) { if (Curve.PlanarClosedCurveRelationship(panelPerimeterCurve, testCurve, Plane.WorldXY, tolerance) == RegionContainment.BInsideA) { rhinoObj.Select(true); } } } } // Select all objects on Tool Hit rhinoObjs = doc.Objects.FindByLayer(Properties.Settings.Default.ToolHitLayerName); if (rhinoObjs == null) { rhinoObjs = doc.Objects.FindByLayer(Properties.Settings.Default.PerforationLayerName); } if (rhinoObjs != null) { foreach (RhinoObject rhinoObj in rhinoObjs) { Rhino.Geometry.Curve testCurve = rhinoObj.Geometry as Rhino.Geometry.Curve; if (testCurve != null) { if (Curve.PlanarClosedCurveRelationship(panelPerimeterCurve, testCurve, Plane.WorldXY, tolerance) == RegionContainment.BInsideA) { rhinoObj.Select(true); } } } } string command = string.Format("-_Export \"" + Path.GetDirectoryName(doc.Path) + @"\" + exportFileName + "\" Scheme \"R12 Lines & Arcs\" Enter"); // Export the selected curves RhinoApp.RunScript(command, true); // Unselect all objects doc.Objects.UnselectAll(); // Default layer index int defaultLayerIndex = doc.Layers.Find("Default", true); doc.Layers.SetCurrentLayerIndex(layerIndex, true); if (Convert.ToBoolean(panel.DrawPerf) != true) { // Delete the Perforation layer as it consumes too much memory // Create a new layer called DIMENSION layerName = "PERFORATION"; // Does a layer with the same name already exist? layerIndex = doc.Layers.Find(layerName, true); // Get all of the objects on the layer. If layername is bogus, you will // just get an empty list back Rhino.DocObjects.RhinoObject[] rhobjs = doc.Objects.FindByLayer(layerName); if (rhobjs != null) { if (rhobjs.Length > 0) { for (int i = 0; i < rhobjs.Length; i++) { doc.Objects.Delete(rhobjs[i], true); } } } doc.Layers.Delete(layerIndex, true); } foreach (Guid g in guidList) { int idx = RhinoDoc.ActiveDoc.Groups.Find(panel.PartName, false); if (idx < 0) { idx = RhinoDoc.ActiveDoc.Groups.Add(panel.PartName); } RhinoDoc.ActiveDoc.Groups.AddToGroup(idx, g); } }
/// <summary> /// Draws the panel. /// </summary> /// <param name="xLowerBound">The x lower bound.</param> /// <param name="xUpperBound">The x upper bound.</param> /// <param name="yLowerBound">The y lower bound.</param> /// <param name="yUpperBound">The y upper bound.</param> /// <param name="panel">The panel.</param> /// <param name="para">The para.</param> public static void drawPanel(double xLowerBound, double xUpperBound, double yLowerBound, double yUpperBound, PerforationPanel panel, bool fixingHolesManipulated, bool enablePerf) { RhinoDoc doc = RhinoDoc.ActiveDoc; List <Guid> guidList = new List <Guid>(); string layerName = null; //name of layers int layerIndex = 0; //index of layers Rhino.DocObjects.Layer parent_layer_Approval = null; //create variable to hold approval layer Rhino.DocObjects.Layer parent_layer_Nesting = null; //create variable to hold nesting layer //Rhino.DocObjects.Layer childlayer = null; //Create a variable to hold child layers string text = ""; double height = panel.labelHeight / 3; const string font = "Arial"; Guid burrLeader; RhinoObject labelText; Rhino.Geometry.Point3d pt = new Rhino.Geometry.Point3d(0, 0, 0); Rhino.Geometry.Plane plane = doc.Views.ActiveView.ActiveViewport.ConstructionPlane(); //start //Creating layer called "Layers for Approval Drawings" to make it a parent layer layerName = "LAYERS FOR APPROVAL DRAWINGS"; // Does a layer with the same name already exist? layerIndex = doc.Layers.Find(layerName, true); // If layer does not exist if (layerIndex == -1) { // Add a new layer to the document layerIndex = doc.Layers.Add(layerName, System.Drawing.Color.Black); parent_layer_Approval = doc.Layers[layerIndex]; //set the layer as parent layer } else { parent_layer_Approval = doc.Layers[layerIndex]; } layerName = "LAYERS FOR NESTING"; // Does a layer with the same name already exist? layerIndex = doc.Layers.Find(layerName, true); // If layer does not exist if (layerIndex == -1) { // Add a new layer to the document layerIndex = doc.Layers.Add(layerName, System.Drawing.Color.Black); parent_layer_Nesting = doc.Layers[layerIndex]; } else { parent_layer_Nesting = doc.Layers[layerIndex]; } // Create a new layer called Perimeter layerName = "PANEL PERIMETER"; layerIndex = createSubLayers.createSubLayer(layerName, System.Drawing.Color.Black, parent_layer_Nesting); //make Nesting layer the parent layer doc.Layers.SetCurrentLayerIndex(layerIndex, true); //Bottom and left justified the panels in the grid (panel x0,x1,y0,y1 - refers to the folds edg (folds layer) double panelX0 = xLowerBound; double panelX1 = panelX0 + panel.X; double panelY0 = yUpperBound; double panelY1 = panelY0 + panel.Y; List <Point3d> list = new List <Point3d>(); panel.Perimeter = doc.Objects.AddLine(new Point3d(panelX0, panelY1, 0), new Point3d(panelX1, panelY1, 0)); guidList.Add(panel.Perimeter); panel.Perimeter = doc.Objects.AddLine(new Point3d(panelX0, panelY0, 0), new Point3d(panelX0, panelY1, 0)); guidList.Add(panel.Perimeter); panel.Perimeter = doc.Objects.AddLine(new Point3d(panelX0, panelY0, 0), new Point3d(panelX1, panelY0, 0)); guidList.Add(panel.Perimeter); panel.Perimeter = doc.Objects.AddLine(new Point3d(panelX1, panelY0, 0), new Point3d(panelX1, panelY1, 0)); guidList.Add(panel.Perimeter); //MetrixUtilities.joinCurves(doc.Layers.Find("PANEL PERIMETER", true)); //join the closed curves using the method //Calculating the borders double borderX0 = panelX0 + panel.LeftBorder; //refers to the borders corners double borderY0 = panelY0 + panel.BottomBorder; double borderX1 = panelX1 - panel.RightBorder; double borderY1 = panelY1 - panel.TopBorder; BoundingBox panelBox = new BoundingBox(borderX0, borderY0, 0, borderX1, borderY1, 0); List <Point3d> rectangle_corners = panelBox.GetCorners().Distinct().ToList(); // add 1st point at last to close the loop rectangle_corners.Add(rectangle_corners[0]); // Create a new layer called Border layerName = "BORDERS"; layerIndex = createSubLayers.createSubLayer(layerName, System.Drawing.Color.Purple, parent_layer_Approval); //pass to the method, make Approval layer the parent layer doc.Layers.SetCurrentLayerIndex(layerIndex, true); //Add the borders only if the panel is not solid if (panel.DrawPerf != 3) { //Create a bounding box for the borders panel.Border = doc.Objects.AddPolyline(rectangle_corners); guidList.Add(panel.Border); } // Create a new layer called LABELS layerName = "LABELS"; layerIndex = createSubLayers.createSubLayer(layerName, System.Drawing.Color.Red, parent_layer_Nesting); //pass to the method, make Nesting layer the parent layer doc.Layers.SetCurrentLayerIndex(layerIndex, true); text = panel.PartName; height = panel.labelHeight; pt = new Rhino.Geometry.Point3d(borderX0, borderY0 + 4 + height, 0); plane = doc.Views.ActiveView.ActiveViewport.ConstructionPlane(); plane.Origin = pt; panel.Label = doc.Objects.AddText(text, plane, height, font, false, false); guidList.Add(panel.Label); RhinoApp.RunScript("SelNone", true); labelText = doc.Objects.Find(panel.Label); labelText.Select(true); BoundingBox bbox = labelText.Geometry.GetBoundingBox(true); double minX = bbox.Corner(true, true, true).X; double maxX = bbox.Corner(false, true, true).X; double minY = bbox.Corner(true, true, true).Y; double maxY = bbox.Corner(true, false, true).Y; if (maxX - minX >= panel.X - panel.LeftBorder - panel.RightBorder) { double ratio = 1; labelText.Select(true); if (panel.Y > panel.X) { RhinoApp.RunScript("_-rotate " + bbox.Center.X + "," + bbox.Center.Y + " " + "90", true); } if (maxY - minY + 4 >= panel.X - panel.LeftBorder - panel.RightBorder) { ratio = (panel.X - panel.LeftBorder - panel.RightBorder) / (2 * (maxY - minY)); if (ratio * (maxX - minX) >= (panel.Y - panel.TopBorder - panel.BottomBorder)) { ratio = ratio * (panel.Y - panel.TopBorder - panel.BottomBorder) / (2 * ratio * (maxX - minX)); } } else if (maxX - minX >= panel.Y - panel.TopBorder - panel.BottomBorder) { ratio = (panel.Y - panel.TopBorder - panel.BottomBorder) / (2 * (maxX - minX)); } RhinoApp.RunScript("_-Scale " + bbox.Center.X + "," + bbox.Center.Y + " " + ratio, true); BoundingBox bbox3 = labelText.Geometry.GetBoundingBox(true); double distance1 = borderX0 + ratio * (bbox3.Max.X - bbox3.Min.X) / 2; double distance2 = borderY0 + ratio * (bbox3.Max.Y - bbox3.Min.Y) / 2; if (panel.Y > panel.X) { distance1 = borderX0 + ratio * (bbox3.Max.Y - bbox3.Min.Y) / 2; distance2 = borderY0 + ratio * (bbox3.Max.X - bbox3.Min.X) / 2; } RhinoApp.WriteLine(bbox3.Center.ToString()); RhinoApp.RunScript("_-Move " + bbox3.Center.X + "," + bbox3.Center.Y + ",0 " + distance1 + "," + distance2 + ",0", true); } else if (maxY - minY >= panel.Y - panel.TopBorder - panel.BottomBorder) { double ratio = (panel.Y - panel.TopBorder - panel.BottomBorder) / (2 * (maxY - minY)); labelText.Select(true); RhinoApp.RunScript("_-Scale " + bbox.Center.X + "," + bbox.Center.Y + " " + ratio, true); BoundingBox bbox2 = labelText.Geometry.GetBoundingBox(true); double distanceX = borderX0 + ratio * (bbox2.Center.X - bbox2.Min.X) / 2; double distanceY = panelBox.Min.Y + ratio * (bbox2.Center.Y - bbox.Min.Y) / 2; RhinoApp.WriteLine(bbox2.Center.ToString()); RhinoApp.RunScript("_-Move " + bbox2.Center.X + "," + bbox2.Center.Y + ",0 " + distanceX + "," + distanceY + ",0", true); } labelText.Select(false); // If dotFontLabel is more than 0 draw the dot font text on the panel, else skip // if (para.DotFont == 1) if (panel.DotFontLabel > 0) { // Create a new layer called DOT SCRIBE LABEL layerName = "DOT SCRIBE LABEL"; layerIndex = createSubLayers.createSubLayer(layerName, System.Drawing.Color.Black, parent_layer_Nesting); //make Nesting layer the parent layer doc.Layers.SetCurrentLayerIndex(layerIndex, true); // Put in the Dot Matrix Label // Draw at the right side of the border aand 10mm from the bottom and 100mm from the left edge double panelOffset = 0; if (panel.BottomBorder - 8.7 <= 6) { panelOffset = (panel.BottomBorder - 8.7) / 2; } else { panelOffset = 3.1; } if (panel.X < 160) { pt = new Point3d(1 * (panelX0 + panelX1) / 2, panelY0 + panelOffset + 8.7, 0); } else { pt = new Point3d(panelX1 - 100, panelY0 + panelOffset + 8.7, 0); } if (panel.DotFontLabellerSide.Equals("Rear")) { DotMatrixLabellerCommand.Instance.drawDotMatrix(pt, panel.PartName, 8.7, panel.X); //set the size of dotfont } else //If not revered use front labeller { DotMatrixFrontLabellerCommand.Instance.drawDotMatrix(pt, panel.PartName, 8.7); } } //checks whether the perforation layers exists, if not create layer and make Approval layer the parent layer //If exists, make Approval layer the parent layer layerName = "PERFORATION"; layerIndex = createSubLayers.createSubLayer(layerName, System.Drawing.Color.Green, parent_layer_Approval); // doc.Layers.SetCurrentLayerIndex(layerIndex, true); //Create Temporary Layer if (panel.DrawPerf == 1) { RhinoUtilities.SetActiveLayer("TemporaryPerfLayer", System.Drawing.Color.Green); doc.Views.Redraw(); RhinoApp.RunScript("SelAll", true); RhinoApp.RunScript("-_Rotate 0,0,0 -" + panel.patternDirection, true); PerforationForm perforationForm = new PerforationForm(new Rhino.DocObjects.ObjRef(panel.Border).Curve()); perforationForm.enablePerforation = enablePerf; perforationForm.drawPerforationDesign(panel.PatternName, true, enablePerf); RhinoApp.RunScript("SelAll", true); RhinoApp.RunScript("-_Rotate 0,0,0 " + panel.patternDirection, true); RhinoApp.RunScript("SelNone", true); var rhinoObjects = doc.Objects.FindByLayer("TemporaryPerfLayer"); var toolHitObjects = doc.Objects.FindByLayer("TemporaryToolHit"); var temporaryTool2Layer = doc.Objects.FindByLayer("TemporaryTool2Layer"); //Perf objects if (rhinoObjects != null && rhinoObjects.Length > 1) { foreach (var rhinObj in rhinoObjects) { rhinObj.Select(true); } if (panel.patternDirection == 1) { RhinoApp.RunScript("-_Rotate 0,0,0 -90", true); RhinoApp.RunScript("-_Rotate 0,0,0 90", true); } RhinoUtilities.SetActiveLayer(Properties.Settings.Default.PerforationLayerName, System.Drawing.Color.Green); RhinoApp.RunScript("-_ChangeLayer PERFORATION", true); int index = doc.Layers.Find("TemporaryPerfLayer", true); doc.Layers.Delete(index, true); } //tool hit objects if (toolHitObjects != null && toolHitObjects.Length > 1) { foreach (var toolhitObj in toolHitObjects) { toolhitObj.Select(true); } if (panel.patternDirection == 1) { RhinoApp.RunScript("-_Rotate 0,0,0 -90", true); RhinoApp.RunScript("-_Rotate 0,0,0 90", true); } RhinoUtilities.SetActiveLayer(Properties.Settings.Default.ToolHitLayerName, System.Drawing.Color.Black); RhinoApp.RunScript("-_ChangeLayer TOOL HIT", true); int index = doc.Layers.Find("TemporaryToolHit", true); doc.Layers.Delete(index, true); } //Tool 2 objects if (temporaryTool2Layer != null && temporaryTool2Layer.Length > 1) { foreach (var tool2Objs in temporaryTool2Layer) { tool2Objs.Select(true); } if (panel.patternDirection == 1) { RhinoApp.RunScript("-_Rotate 0,0,0 -90", true); RhinoApp.RunScript("-_Rotate 0,0,0 90", true); } RhinoUtilities.SetActiveLayer("Tool 2 Layer", System.Drawing.Color.Yellow); RhinoApp.RunScript("-_ChangeLayer Tool 2 Layer", true); int index = doc.Layers.Find("TemporaryTool2Layer", true); doc.Layers.Delete(index, true); } doc.Views.Redraw(); } DimensionStyle dimStyle = MetrixUtilities.createMetrixRealDimension(); //sets the metrix real dimension Point3d origin = new Point3d(0, 0, 0); Point3d offset = new Point3d(0, 0, 0); Point2d ext1; Point2d ext2; Point2d linePt; LinearDimension dimension; Guid dimGuid = new Guid(); double u, v; // Create a new layer called DIMENSIONS BLACK layerName = "DIMENSIONS BLACK"; layerIndex = createSubLayers.createSubLayer(layerName, System.Drawing.Color.Black, parent_layer_Approval); //pass to the method, make Approval layer the parent layer doc.Layers.SetCurrentLayerIndex(layerIndex, true); // Add the word perforated area to the panel if (panel.DrawPerf != 3) //Add the text only if the panel is not a solid panel { //pt = new Rhino.Geometry.Point3d(((borderX1 + borderX0) / 2) - 117.5, ((borderY1 + borderY0) / 2) + 33, 0); text = System.Text.RegularExpressions.Regex.Unescape(panel.PerfText); height = panel.labelHeight / 2; pt = new Rhino.Geometry.Point3d(((borderX1 + borderX0) / 2) - 117.5, ((borderY1 + borderY0) / 2) + 10 + height, 0); plane.Origin = pt; Guid perforatedAreaLabel = doc.Objects.AddText(text, plane, height, font, false, false); guidList.Add(perforatedAreaLabel); double ratio = 1; if (panel.X - panel.LeftBorder - panel.RightBorder < 230) { RhinoApp.RunScript("SelNone", true); labelText = doc.Objects.Find(perforatedAreaLabel); labelText.Select(true); bbox = labelText.Geometry.GetBoundingBox(true); if (panel.Y > panel.X) { RhinoApp.RunScript("_-rotate " + bbox.Center.X + "," + bbox.Center.Y + " " + "90", true); } minX = bbox.Corner(true, true, true).X; maxX = bbox.Corner(false, true, true).X; minY = bbox.Corner(true, true, true).Y; maxY = bbox.Corner(true, false, true).Y; if (maxY - minY > panel.X - panel.LeftBorder - panel.RightBorder) { ratio = (panel.X - panel.LeftBorder - panel.RightBorder) / (2 * (maxY - minY)); if (ratio * (maxX - minX) > (panel.Y - panel.TopBorder - panel.BottomBorder)) { ratio = ratio * (panel.Y - panel.TopBorder - panel.BottomBorder) / (2 * ratio * (maxX - minX)); } } else if (maxX - minX >= panel.Y - panel.TopBorder - panel.BottomBorder) { ratio = (panel.Y - panel.TopBorder - panel.BottomBorder) / (2 * (maxX - minX)); } labelText.Select(true); RhinoApp.RunScript("_-Scale " + bbox.Center.X + "," + bbox.Center.Y + " " + ratio, true); BoundingBox bbox2 = labelText.Geometry.GetBoundingBox(true); double distanceX = (borderX0 + borderX1) / 2; double distanceY = (borderY0 + borderY1) / 2; RhinoApp.WriteLine(bbox2.Center.ToString()); RhinoApp.RunScript("_-Move " + bbox2.Center.X + "," + bbox2.Center.Y + ",0 " + distanceX + "," + distanceY + ",0", true); } else { RhinoApp.RunScript("SelNone", true); labelText = doc.Objects.Find(perforatedAreaLabel); labelText.Select(true); bbox = labelText.Geometry.GetBoundingBox(true); minX = bbox.Corner(true, true, true).X; maxX = bbox.Corner(false, true, true).X; minY = bbox.Corner(true, true, true).Y; maxY = bbox.Corner(true, false, true).Y; if (maxX - minX > panel.Y - panel.TopBorder - panel.BottomBorder) { ratio = (panel.Y - panel.TopBorder - panel.BottomBorder) / (2 * (maxY - minY)); labelText.Select(true); RhinoApp.RunScript("_-Scale " + bbox.Center.X + "," + bbox.Center.Y + " " + ratio, true); } BoundingBox bbox2 = labelText.Geometry.GetBoundingBox(true); double distanceX = (borderX0 + borderX1) / 2; double distanceY = (borderY0 + borderY1) / 2; RhinoApp.WriteLine(bbox2.Center.ToString()); RhinoApp.RunScript("_-Move " + bbox2.Center.X + "," + bbox2.Center.Y + ",0 " + distanceX + "," + distanceY + ",0", true); } } // Add horizontal dimension origin = new Point3d(panelX1, panelY0 - 50, 0); offset = new Point3d(panelX0, panelY0 - 50, 0); pt = new Point3d((offset.X - origin.X) / 2, panelY0 - 100, 0); plane = Plane.WorldXY; plane.Origin = origin; //double u, v; plane.ClosestParameter(origin, out u, out v); ext1 = new Point2d(u, v); plane.ClosestParameter(offset, out u, out v); ext2 = new Point2d(u, v); plane.ClosestParameter(pt, out u, out v); linePt = new Point2d(u, v); dimension = new LinearDimension(plane, ext1, ext2, linePt); dimGuid = doc.Objects.AddLinearDimension(dimension); //add the bottom dimension(vertical line) guidList.Add(dimGuid); // Add vertical dimension for panel origin = new Point3d(panelX0 - 20, panelY0, 0); offset = new Point3d(panelX0 - 20, panelY1, 0); pt = new Point3d(panelX0 - 100, (offset.Y - origin.Y) / 2, 0); plane = Plane.WorldXY; plane.XAxis = new Vector3d(0, -1, 0); plane.YAxis = new Vector3d(-1, 0, 0); plane.ZAxis = new Vector3d(0, 0, -1); plane.Origin = origin; plane.ClosestParameter(origin, out u, out v); ext1 = new Point2d(u, v); plane.ClosestParameter(offset, out u, out v); ext2 = new Point2d(u, v); plane.ClosestParameter(pt, out u, out v); linePt = new Point2d(u, v); dimension = new LinearDimension(plane, ext1, ext2, linePt); dimGuid = doc.Objects.AddLinearDimension(dimension); //adds the left dimension guidList.Add(dimGuid); MetrixUtilities.createMetrixBordersDimension(); //sets the dimension style for borders // Draw Border dimension on BORDERS layer if (panel.DrawPerf != 3) ///Add only if the panel is not a solid panel { layerName = "BORDERS"; layerIndex = doc.Layers.Find(layerName, true); doc.Layers.SetCurrentLayerIndex(layerIndex, true); // Add horizontal borders dimension origin = new Point3d(panelX1, (panelY0 + panelY1) / 2, 0); offset = new Point3d(borderX1, (panelY0 + panelY1) / 2, 0); pt = new Point3d((offset.X - origin.X) / 2, (borderY0 + borderY1) / 2, 0); plane = Plane.WorldXY; plane.Origin = origin; plane.ClosestParameter(origin, out u, out v); ext1 = new Point2d(u, v); plane.ClosestParameter(offset, out u, out v); ext2 = new Point2d(u, v); plane.ClosestParameter(pt, out u, out v); linePt = new Point2d(u, v); dimension = new LinearDimension(plane, ext1, ext2, linePt); dimGuid = doc.Objects.AddLinearDimension(dimension); guidList.Add(dimGuid); // Add horizontal borders dimension origin = new Point3d(panelX0, (panelY0 + panelY1) / 2, 0); offset = new Point3d(borderX0, (panelY0 + panelY1) / 2, 0); pt = new Point3d((offset.X - origin.X) / 2, (borderY0 + borderY1) / 2, 0); plane.ClosestParameter(origin, out u, out v); ext1 = new Point2d(u, v); plane.ClosestParameter(offset, out u, out v); ext2 = new Point2d(u, v); plane.ClosestParameter(pt, out u, out v); linePt = new Point2d(u, v); dimension = new LinearDimension(plane, ext1, ext2, linePt); dimGuid = doc.Objects.AddLinearDimension(dimension); guidList.Add(dimGuid); // Add vertical border dimension for panel origin = new Point3d((panelX0 + panelX1) / 2, panelY0, 0); offset = new Point3d((panelX0 + panelX1) / 2, borderY0, 0); pt = new Point3d((borderX0 + borderX1) / 2, (offset.Y - origin.Y) / 2, 0); plane = Plane.WorldXY; plane.XAxis = new Vector3d(0, -1, 0); plane.YAxis = new Vector3d(-1, 0, 0); plane.ZAxis = new Vector3d(0, 0, -1); plane.Origin = origin; plane.ClosestParameter(origin, out u, out v); ext1 = new Point2d(u, v); plane.ClosestParameter(offset, out u, out v); ext2 = new Point2d(u, v); plane.ClosestParameter(pt, out u, out v); linePt = new Point2d(u, v); dimension = new LinearDimension(plane, ext1, ext2, linePt); dimGuid = doc.Objects.AddLinearDimension(dimension); guidList.Add(dimGuid); origin = new Point3d((panelX0 + panelX1) / 2, panelY1, 0); offset = new Point3d((panelX0 + panelX1) / 2, borderY1, 0); pt = new Point3d((borderX0 + borderX1) / 2, (offset.Y - origin.Y) / 2, 0); plane.ClosestParameter(origin, out u, out v); ext1 = new Point2d(u, v); plane.ClosestParameter(offset, out u, out v); ext2 = new Point2d(u, v); plane.ClosestParameter(pt, out u, out v); linePt = new Point2d(u, v); dimension = new LinearDimension(plane, ext1, ext2, linePt); dimGuid = doc.Objects.AddLinearDimension(dimension); guidList.Add(dimGuid); } MetrixUtilities.createMetrixRealDimension(); //sets the default dimension style layerName = "VIEWPORT"; layerIndex = createSubLayers.createSubLayer(layerName, System.Drawing.Color.Black, parent_layer_Approval); //pass to the method, make Approval layer the parent layer doc.Layers.SetCurrentLayerIndex(layerIndex, true); Rhino.DocObjects.RhinoObject label = doc.Objects.Find(panel.Label); string exportFileName = "1"; if (label != null) { label.Select(true); Rhino.Geometry.TextEntity textentity = label.Geometry as Rhino.Geometry.TextEntity; exportFileName = textentity.Text + ".dxf"; } /** * Checks if the dxf files are required by the user, if yes check whether the panel is perforated * using the drawPerf property in the panel. If it is a perforated panel then check if the directory * for perforated panels dxf files already exists, if does not exist create directory and run command. * If panel is not perforated, create directory to save not perforated panels dxf files if the directory * does not exist. Then run the dxf file create command. * */ if (panel.DXFFilesRequired.Equals("Yes")) { String path; String immediateFolderName = Path.GetFileName(Path.GetDirectoryName(doc.Path)); //get the immediate foldername which the file is located in //split the path to get the parent folder. String[] newPath = MetrixUtilities.splitString(Path.GetDirectoryName(doc.Path), immediateFolderName); if (panel.DrawPerf == 1) //checks if panel is perforated { path = newPath[0] + ("5TRUMPF") + ("\\WITH PERF"); //merge path for perforated files if (!Directory.Exists(path)) //check if directory already exists { System.IO.Directory.CreateDirectory(path); //create directory if not exist } } else { path = newPath[0] + ("5TRUMPF") + ("\\NO PERF"); //merge path for not perforated files if (!Directory.Exists(path)) //check if directory already exists { System.IO.Directory.CreateDirectory(path); //create directory if not exist } } string command = string.Format("-_Export \"" + path + @"\" + exportFileName + "\" Scheme \"R12 Lines & Arcs\" Enter"); // Export the selected curves RhinoApp.RunScript(command, true); } // Unselect all objects doc.Objects.UnselectAll(); // Default layer index int defaultLayerIndex = doc.Layers.Find("Default", true); doc.Layers.SetCurrentLayerIndex(layerIndex, true); ////if draw perf is false, turnoff the toolhit layer //if (Convert.ToBoolean(panel.DrawPerf) != true) //{ // layerName = "Tool Hit"; // layerIndex = doc.Layers.Find(layerName, true); // doc.Layers[layerIndex].IsVisible = false; //} MetrixUtilities.joinCurves(doc.Layers.Find("PANEL PERIMETER", true)); if (panel.FixingHoles == "1") { //if fixing holes are not manipulated, recalculate distances if (!fixingHolesManipulated) { //panel = reCalculateDistances(panel); //Below method is if fixing holes are automated guidList = FixingHoles.drawFixingFoles(panel, null, false, 0, 0, panelY0, panelY1, dimStyle, guidList, panelX0, panelX1, 0, 0, 0, 0, 0); //add fixing holes } else { //Below method is if fixing holes have been manipulated guidList = CustomFixingHoles.drawFixingFoles(panel, null, false, 0, 0, panelY0, panelY1, dimStyle, guidList, panelX0, panelX1, 0, 0, 0, 0, 0); //add fixing holes } } layerName = "VIEWPORT"; layerIndex = createSubLayers.createSubLayer(layerName, System.Drawing.Color.Black, parent_layer_Approval); //pass to the method, make Approval layer the parent layer doc.Layers.SetCurrentLayerIndex(layerIndex, true); foreach (Guid g in guidList) { int idx = RhinoDoc.ActiveDoc.Groups.Find(panel.PartName, false); if (idx < 0) { idx = RhinoDoc.ActiveDoc.Groups.Add(panel.PartName); } RhinoDoc.ActiveDoc.Groups.AddToGroup(idx, g); } //end }
protected override Result RunCommand(RhinoDoc doc, RunMode mode) { // Check the selected curve GetObject go = new GetObject(); go.GroupSelect = true; go.SubObjectSelect = false; go.EnableClearObjectsOnEntry(false); go.EnableUnselectObjectsOnExit(false); go.DeselectAllBeforePostSelect = false; go.EnableSelPrevious(true); go.EnablePreSelect(true, false); go.GeometryFilter = Rhino.DocObjects.ObjectType.Curve; GetResult result = go.Get(); if (go.CommandResult() != Rhino.Commands.Result.Success) { return(go.CommandResult()); } if (go.ObjectCount != 1) { RhinoApp.WriteLine("Error: {0} curve is selected.", go.ObjectCount); return(Rhino.Commands.Result.Failure); } RhinoApp.WriteLine("{0} curve is selected.", go.ObjectCount); Curve curve = go.Object(0).Curve(); // If curve is null if (curve == null) { return(Rhino.Commands.Result.Failure); } // If curve is Closed Curve Orientation if (curve.IsClosed == false) { RhinoApp.WriteLine("The curve is open"); return(Rhino.Commands.Result.Failure); } PerforationForm perforationForm = new PerforationForm(curve); // perforationForm.ShowDialog(RhinoApp.MainWindow()); // Prompt the user to enter a layer name Rhino.Input.Custom.GetString gs = new Rhino.Input.Custom.GetString(); gs.SetCommandPrompt("Name of the Design: e.g. 60 degrees - Round 2.4 @ 3.6"); gs.AcceptNothing(false); gs.Get(); if (gs.CommandResult() != Rhino.Commands.Result.Success) { return(gs.CommandResult()); } perforationForm.drawPerforationDesign(gs.StringResult().Trim(), true); return(Result.Success); }