public void Run(int N, IFAREN FCN, ref double X, ref double[] Y, int offset_y, double XEND, ref double HMAX
, ref double H, double[] RTOL, int offset_rtol, double[] ATOL, int offset_atol, int ITOL, int IPRINT, ISOLOUT SOLOUT
, int IOUT, ref int IDID, int NMAX, double UROUND, int METH, int NSTIFF
, double SAFE, double BETA, double FAC1, double FAC2, ref double[] Y1, int offset_y1, ref double[] K1, int offset_k1
, ref double[] K2, int offset_k2, ref double[] K3, int offset_k3, ref double[] K4, int offset_k4, ref double[] K5, int offset_k5, ref double[] K6, int offset_k6, ref double[] YSTI, int offset_ysti
, ref double[] CONT, int offset_cont, int[] ICOMP, int offset_icomp, int NRD, double[] RPAR, int offset_rpar, int[] IPAR, int offset_ipar, ref int NFCN
, ref int NSTEP, ref int NACCPT, ref int NREJCT)
{
#region Variables
bool REJECT = false; bool LAST = false;
#endregion Variables
#region Implicit Variables
double FACOLD = 0; double EXPO1 = 0; double FACC1 = 0; double FACC2 = 0; double POSNEG = 0; double ATOLI = 0;
double RTOLI = 0; double HLAMB = 0; int IASTI = 0; int IORD = 0; int IRTRN = 0; int I = 0; double A21 = 0;
double A31 = 0; double A32 = 0; double A41 = 0; double A42 = 0; double A43 = 0; double A51 = 0; double A52 = 0;
double A53 = 0; double A54 = 0; double A61 = 0; double A62 = 0; double A63 = 0; double A64 = 0; double A65 = 0;
double XPH = 0; double A71 = 0; double A73 = 0; double A74 = 0; double A75 = 0; double A76 = 0; int J = 0;
double D1 = 0; double D3 = 0; double D4 = 0; double D5 = 0; double D6 = 0; double D7 = 0; double E1 = 0; double E3 = 0;
double E4 = 0; double E5 = 0; double E6 = 0; double E7 = 0; double ERR = 0; double SK = 0; double FAC11 = 0;
double FAC = 0; double HNEW = 0; double STNUM = 0; double STDEN = 0; int NONSTI = 0; double YD0 = 0; double YDIFF = 0;
double BSPL = 0; double C2 = 0; double C3 = 0; double C4 = 0; double C5 = 0;
#endregion Implicit Variables
#region Array Index Correction
int o_y = -1 + offset_y; int o_rtol = -1 + offset_rtol; int o_atol = -1 + offset_atol; int o_y1 = -1 + offset_y1;
int o_k1 = -1 + offset_k1; int o_k2 = -1 + offset_k2; int o_k3 = -1 + offset_k3; int o_k4 = -1 + offset_k4;
int o_k5 = -1 + offset_k5; int o_k6 = -1 + offset_k6; int o_ysti = -1 + offset_ysti; int o_cont = -1 + offset_cont;
int o_icomp = -1 + offset_icomp; int o_rpar = -1 + offset_rpar; int o_ipar = -1 + offset_ipar;
#endregion Array Index Correction
// C ----------------------------------------------------------
// C CORE INTEGRATOR FOR DOPRI5
// C PARAMETERS SAME AS IN DOPRI5 WITH WORKSPACE ADDED
// C ----------------------------------------------------------
// C DECLARATIONS
// C ----------------------------------------------------------
// C *** *** *** *** *** *** ***
// C INITIALISATIONS
// C *** *** *** *** *** *** ***
#region Body
if (METH == 1)
{
this._cdopri.Run(ref C2, ref C3, ref C4, ref C5, ref E1, ref E3
, ref E4, ref E5, ref E6, ref E7, ref A21, ref A31
, ref A32, ref A41, ref A42, ref A43, ref A51, ref A52
, ref A53, ref A54, ref A61, ref A62, ref A63, ref A64
, ref A65, ref A71, ref A73, ref A74, ref A75, ref A76
, ref D1, ref D3, ref D4, ref D5, ref D6, ref D7);
}
FACOLD = 1.0E-4;
EXPO1 = 0.2E0 - BETA * 0.75E0;
FACC1 = 1.0E0 / FAC1;
FACC2 = 1.0E0 / FAC2;
POSNEG = FortranLib.Sign(1.0E0, XEND - X);
// C --- INITIAL PREPARATIONS
ATOLI = ATOL[1 + o_atol];
RTOLI = RTOL[1 + o_rtol];
LAST = false;
HLAMB = 0.0E0;
IASTI = 0;
FCN.Run(N, X, Y, offset_y, ref K1, offset_k1, RPAR, offset_rpar, IPAR[1 + o_ipar]);
HMAX = Math.Abs(HMAX);
IORD = 5;
if (H == 0.0E0) H = this._hinit.Run(N, FCN, X, Y, offset_y, XEND, POSNEG, K1, offset_k1, ref K2, offset_k2, ref K3, offset_k3, IORD, HMAX, ATOL, offset_atol, RTOL, offset_rtol, ITOL, RPAR, offset_rpar, IPAR, offset_ipar);
NFCN += 2;
REJECT = false;
XOLD.v = X;
if (IOUT != 0)
{
IRTRN = 1;
HOUT.v = H;
SOLOUT.Run(NACCPT + 1, XOLD.v, X, Y, offset_y, N, CONT, offset_cont
, ICOMP, offset_icomp, NRD, RPAR, offset_rpar, IPAR[1 + o_ipar], IRTRN);
if (IRTRN < 0) goto LABEL79;
}
else
{
IRTRN = 0;
}
// C --- BASIC INTEGRATION STEP
LABEL1:;
if (NSTEP > NMAX) goto LABEL78;
if (0.1E0 * Math.Abs(H) <= Math.Abs(X) * UROUND) goto LABEL77;
if ((X + 1.01E0 * H - XEND) * POSNEG > 0.0E0)
{
H = XEND - X;
LAST = true;
}
NSTEP += 1;
// C --- THE FIRST 6 STAGES
if (IRTRN >= 2)
{
FCN.Run(N, X, Y, offset_y, ref K1, offset_k1, RPAR, offset_rpar, IPAR[1 + o_ipar]);
}
for (I = 1; I <= N; I++)
{
Y1[I + o_y1] = Y[I + o_y] + H * A21 * K1[I + o_k1];
}
FCN.Run(N, X + C2 * H, Y1, offset_y1, ref K2, offset_k2, RPAR, offset_rpar, IPAR[1 + o_ipar]);
for (I = 1; I <= N; I++)
{
Y1[I + o_y1] = Y[I + o_y] + H * (A31 * K1[I + o_k1] + A32 * K2[I + o_k2]);
}
FCN.Run(N, X + C3 * H, Y1, offset_y1, ref K3, offset_k3, RPAR, offset_rpar, IPAR[1 + o_ipar]);
for (I = 1; I <= N; I++)
{
Y1[I + o_y1] = Y[I + o_y] + H * (A41 * K1[I + o_k1] + A42 * K2[I + o_k2] + A43 * K3[I + o_k3]);
}
FCN.Run(N, X + C4 * H, Y1, offset_y1, ref K4, offset_k4, RPAR, offset_rpar, IPAR[1 + o_ipar]);
for (I = 1; I <= N; I++)
{
Y1[I + o_y1] = Y[I + o_y] + H * (A51 * K1[I + o_k1] + A52 * K2[I + o_k2] + A53 * K3[I + o_k3] + A54 * K4[I + o_k4]);
}
FCN.Run(N, X + C5 * H, Y1, offset_y1, ref K5, offset_k5, RPAR, offset_rpar, IPAR[1 + o_ipar]);
for (I = 1; I <= N; I++)
{
YSTI[I + o_ysti] = Y[I + o_y] + H * (A61 * K1[I + o_k1] + A62 * K2[I + o_k2] + A63 * K3[I + o_k3] + A64 * K4[I + o_k4] + A65 * K5[I + o_k5]);
}
XPH = X + H;
FCN.Run(N, XPH, YSTI, offset_ysti, ref K6, offset_k6, RPAR, offset_rpar, IPAR[1 + o_ipar]);
for (I = 1; I <= N; I++)
{
Y1[I + o_y1] = Y[I + o_y] + H * (A71 * K1[I + o_k1] + A73 * K3[I + o_k3] + A74 * K4[I + o_k4] + A75 * K5[I + o_k5] + A76 * K6[I + o_k6]);
}
FCN.Run(N, XPH, Y1, offset_y1, ref K2, offset_k2, RPAR, offset_rpar, IPAR[1 + o_ipar]);
if (IOUT >= 2)
{
for (J = 1; J <= NRD; J++)
{
I = ICOMP[J + o_icomp];
CONT[4 * NRD + J + o_cont] = H * (D1 * K1[I + o_k1] + D3 * K3[I + o_k3] + D4 * K4[I + o_k4] + D5 * K5[I + o_k5] + D6 * K6[I + o_k6] + D7 * K2[I + o_k2]);
}
}
for (I = 1; I <= N; I++)
{
K4[I + o_k4] = (E1 * K1[I + o_k1] + E3 * K3[I + o_k3] + E4 * K4[I + o_k4] + E5 * K5[I + o_k5] + E6 * K6[I + o_k6] + E7 * K2[I + o_k2]) * H;
}
NFCN += 6;
// C --- ERROR ESTIMATION
ERR = 0.0E0;
if (ITOL == 0)
{
for (I = 1; I <= N; I++)
{
SK = ATOLI + RTOLI * Math.Max(Math.Abs(Y[I + o_y]), Math.Abs(Y1[I + o_y1]));
ERR += Math.Pow(K4[I + o_k4] / SK, 2);
}
}
else
{
for (I = 1; I <= N; I++)
{
SK = ATOL[I + o_atol] + RTOL[I + o_rtol] * Math.Max(Math.Abs(Y[I + o_y]), Math.Abs(Y1[I + o_y1]));
ERR += Math.Pow(K4[I + o_k4] / SK, 2);
}
}
ERR = Math.Sqrt(ERR / N);
// C --- COMPUTATION OF HNEW
FAC11 = Math.Pow(ERR, EXPO1);
// C --- LUND-STABILIZATION
FAC = FAC11 / Math.Pow(FACOLD, BETA);
// C --- WE REQUIRE FAC1 <= HNEW/H <= FAC2
FAC = Math.Max(FACC2, Math.Min(FACC1, FAC / SAFE));
HNEW = H / FAC;
if (ERR <= 1.0E0)
{
// C --- STEP IS ACCEPTED
FACOLD = Math.Max(ERR, 1.0E-4);
NACCPT += 1;
// C ------- STIFFNESS DETECTION
if (FortranLib.Mod(NACCPT, NSTIFF) == 0 || IASTI > 0)
{
STNUM = 0.0E0;
STDEN = 0.0E0;
for (I = 1; I <= N; I++)
{
STNUM += Math.Pow(K2[I + o_k2] - K6[I + o_k6], 2);
STDEN += Math.Pow(Y1[I + o_y1] - YSTI[I + o_ysti], 2);
}
if (STDEN > 0.0E0) HLAMB = H * Math.Sqrt(STNUM / STDEN);
if (HLAMB > 3.25E0)
{
NONSTI = 0;
IASTI += 1;
if (IASTI == 15)
{
if (IPRINT > 0) ;//ERROR-ERRORWRITE(IPRINT,*)' THE PROBLEM SEEMS TO BECOME STIFF AT X = ',X
if (IPRINT <= 0) goto LABEL76;
}
}
else
{
NONSTI += 1;
if (NONSTI == 6) IASTI = 0;
}
}
if (IOUT >= 2)
{
for (J = 1; J <= NRD; J++)
{
I = ICOMP[J + o_icomp];
YD0 = Y[I + o_y];
YDIFF = Y1[I + o_y1] - YD0;
BSPL = H * K1[I + o_k1] - YDIFF;
CONT[J + o_cont] = Y[I + o_y];
CONT[NRD + J + o_cont] = YDIFF;
CONT[2 * NRD + J + o_cont] = BSPL;
CONT[3 * NRD + J + o_cont] = -H * K2[I + o_k2] + YDIFF - BSPL;
}
}
for (I = 1; I <= N; I++)
{
K1[I + o_k1] = K2[I + o_k2];
Y[I + o_y] = Y1[I + o_y1];
}
XOLD.v = X;
X = XPH;
if (IOUT != 0)
{
HOUT.v = H;
SOLOUT.Run(NACCPT + 1, XOLD.v, X, Y, offset_y, N, CONT, offset_cont
, ICOMP, offset_icomp, NRD, RPAR, offset_rpar, IPAR[1 + o_ipar], IRTRN);
if (IRTRN < 0) goto LABEL79;
}
// C ------- NORMAL EXIT
if (LAST)
{
H = HNEW;
IDID = 1;
return;
}
if (Math.Abs(HNEW) > HMAX) HNEW = POSNEG * HMAX;
if (REJECT) HNEW = POSNEG * Math.Min(Math.Abs(HNEW), Math.Abs(H));
REJECT = false;
}
else
{
// C --- STEP IS REJECTED
HNEW = H / Math.Min(FACC1, FAC11 / SAFE);
REJECT = true;
if (NACCPT >= 1) NREJCT += 1;
LAST = false;
}
H = HNEW;
goto LABEL1;
// C --- FAIL EXIT
LABEL76:;
IDID = -4;
return;
LABEL77:;
if (IPRINT > 0) ;//ERROR-ERRORWRITE(IPRINT,979)X
if (IPRINT > 0) ;//ERROR-ERRORWRITE(IPRINT,*)' STEP SIZE T0O SMALL, H=',H
IDID = -3;
return;
LABEL78:;
if (IPRINT > 0) ;//ERROR-ERRORWRITE(IPRINT,979)X
if (IPRINT > 0) ;//ERROR-ERRORWRITE(IPRINT,*)' MORE THAN NMAX =',NMAX,'STEPS ARE NEEDED'
IDID = -2;
return;
LABEL79:;
if (IPRINT > 0) ;//ERROR-ERRORWRITE(IPRINT,979)X
IDID = 2;
return;
#endregion Body
}
public void Run(int N, IFAREN FCN, ref double X, ref double[] Y, int offset_y, double XEND, ref double HMAX
, ref double H, double[] RTOL, int offset_rtol, double[] ATOL, int offset_atol, int ITOL, int IPRINT, ISOLOUT SOLOUT
, int IOUT, ref int IDID, int NMAX, double UROUND, int METH, int NSTIFF
, double SAFE, double BETA, double FAC1, double FAC2, ref double[] Y1, int offset_y1, ref double[] K1, int offset_k1
, ref double[] K2, int offset_k2, ref double[] K3, int offset_k3, ref double[] K4, int offset_k4, ref double[] K5, int offset_k5, ref double[] K6, int offset_k6, ref double[] YSTI, int offset_ysti
, ref double[] CONT, int offset_cont, int[] ICOMP, int offset_icomp, int NRD, double[] RPAR, int offset_rpar, int[] IPAR, int offset_ipar, ref int NFCN
, ref int NSTEP, ref int NACCPT, ref int NREJCT)
{
#region Variables
bool REJECT = false; bool LAST = false;
#endregion
#region Implicit Variables
double FACOLD = 0; double EXPO1 = 0; double FACC1 = 0; double FACC2 = 0; double POSNEG = 0; double ATOLI = 0;
double RTOLI = 0; double HLAMB = 0; int IASTI = 0; int IORD = 0; int IRTRN = 0; int I = 0; double A21 = 0;
double A31 = 0; double A32 = 0; double A41 = 0; double A42 = 0; double A43 = 0; double A51 = 0; double A52 = 0;
double A53 = 0; double A54 = 0; double A61 = 0; double A62 = 0; double A63 = 0; double A64 = 0; double A65 = 0;
double XPH = 0; double A71 = 0; double A73 = 0; double A74 = 0; double A75 = 0; double A76 = 0; int J = 0;
double D1 = 0; double D3 = 0; double D4 = 0; double D5 = 0; double D6 = 0; double D7 = 0; double E1 = 0; double E3 = 0;
double E4 = 0; double E5 = 0; double E6 = 0; double E7 = 0; double ERR = 0; double SK = 0; double FAC11 = 0;
double FAC = 0; double HNEW = 0; double STNUM = 0; double STDEN = 0; int NONSTI = 0; double YD0 = 0; double YDIFF = 0;
double BSPL = 0; double C2 = 0; double C3 = 0; double C4 = 0; double C5 = 0;
#endregion
#region Array Index Correction
int o_y = -1 + offset_y; int o_rtol = -1 + offset_rtol; int o_atol = -1 + offset_atol; int o_y1 = -1 + offset_y1;
int o_k1 = -1 + offset_k1; int o_k2 = -1 + offset_k2; int o_k3 = -1 + offset_k3; int o_k4 = -1 + offset_k4;
int o_k5 = -1 + offset_k5; int o_k6 = -1 + offset_k6; int o_ysti = -1 + offset_ysti; int o_cont = -1 + offset_cont;
int o_icomp = -1 + offset_icomp; int o_rpar = -1 + offset_rpar; int o_ipar = -1 + offset_ipar;
#endregion
// C ----------------------------------------------------------
// C CORE INTEGRATOR FOR DOPRI5
// C PARAMETERS SAME AS IN DOPRI5 WITH WORKSPACE ADDED
// C ----------------------------------------------------------
// C DECLARATIONS
// C ----------------------------------------------------------
// C *** *** *** *** *** *** ***
// C INITIALISATIONS
// C *** *** *** *** *** *** ***
#region Body
if (METH == 1)
{
this._cdopri.Run(ref C2, ref C3, ref C4, ref C5, ref E1, ref E3
, ref E4, ref E5, ref E6, ref E7, ref A21, ref A31
, ref A32, ref A41, ref A42, ref A43, ref A51, ref A52
, ref A53, ref A54, ref A61, ref A62, ref A63, ref A64
, ref A65, ref A71, ref A73, ref A74, ref A75, ref A76
, ref D1, ref D3, ref D4, ref D5, ref D6, ref D7);
}
FACOLD = 1.0E-4;
EXPO1 = 0.2E0 - BETA * 0.75E0;
FACC1 = 1.0E0 / FAC1;
FACC2 = 1.0E0 / FAC2;
POSNEG = FortranLib.Sign(1.0E0, XEND - X);
// C --- INITIAL PREPARATIONS
ATOLI = ATOL[1 + o_atol];
RTOLI = RTOL[1 + o_rtol];
LAST = false;
HLAMB = 0.0E0;
IASTI = 0;
FCN.Run(N, X, Y, offset_y, ref K1, offset_k1, RPAR, offset_rpar, IPAR[1 + o_ipar]);
HMAX = Math.Abs(HMAX);
IORD = 5;
if (H == 0.0E0)
{
H = this._hinit.Run(N, FCN, X, Y, offset_y, XEND, POSNEG, K1, offset_k1, ref K2, offset_k2, ref K3, offset_k3, IORD, HMAX, ATOL, offset_atol, RTOL, offset_rtol, ITOL, RPAR, offset_rpar, IPAR, offset_ipar);
}
NFCN += 2;
REJECT = false;
XOLD.v = X;
if (IOUT != 0)
{
IRTRN = 1;
HOUT.v = H;
SOLOUT.Run(NACCPT + 1, XOLD.v, X, Y, offset_y, N, CONT, offset_cont
, ICOMP, offset_icomp, NRD, RPAR, offset_rpar, IPAR[1 + o_ipar], IRTRN);
if (IRTRN < 0)
{
goto LABEL79;
}
}
else
{
IRTRN = 0;
}
// C --- BASIC INTEGRATION STEP
LABEL1 :;
if (NSTEP > NMAX)
{
goto LABEL78;
}
if (0.1E0 * Math.Abs(H) <= Math.Abs(X) * UROUND)
{
goto LABEL77;
}
if ((X + 1.01E0 * H - XEND) * POSNEG > 0.0E0)
{
H = XEND - X;
LAST = true;
}
NSTEP += 1;
// C --- THE FIRST 6 STAGES
if (IRTRN >= 2)
{
FCN.Run(N, X, Y, offset_y, ref K1, offset_k1, RPAR, offset_rpar, IPAR[1 + o_ipar]);
}
for (I = 1; I <= N; I++)
{
Y1[I + o_y1] = Y[I + o_y] + H * A21 * K1[I + o_k1];
}
FCN.Run(N, X + C2 * H, Y1, offset_y1, ref K2, offset_k2, RPAR, offset_rpar, IPAR[1 + o_ipar]);
for (I = 1; I <= N; I++)
{
Y1[I + o_y1] = Y[I + o_y] + H * (A31 * K1[I + o_k1] + A32 * K2[I + o_k2]);
}
FCN.Run(N, X + C3 * H, Y1, offset_y1, ref K3, offset_k3, RPAR, offset_rpar, IPAR[1 + o_ipar]);
for (I = 1; I <= N; I++)
{
Y1[I + o_y1] = Y[I + o_y] + H * (A41 * K1[I + o_k1] + A42 * K2[I + o_k2] + A43 * K3[I + o_k3]);
}
FCN.Run(N, X + C4 * H, Y1, offset_y1, ref K4, offset_k4, RPAR, offset_rpar, IPAR[1 + o_ipar]);
for (I = 1; I <= N; I++)
{
Y1[I + o_y1] = Y[I + o_y] + H * (A51 * K1[I + o_k1] + A52 * K2[I + o_k2] + A53 * K3[I + o_k3] + A54 * K4[I + o_k4]);
}
FCN.Run(N, X + C5 * H, Y1, offset_y1, ref K5, offset_k5, RPAR, offset_rpar, IPAR[1 + o_ipar]);
for (I = 1; I <= N; I++)
{
YSTI[I + o_ysti] = Y[I + o_y] + H * (A61 * K1[I + o_k1] + A62 * K2[I + o_k2] + A63 * K3[I + o_k3] + A64 * K4[I + o_k4] + A65 * K5[I + o_k5]);
}
XPH = X + H;
FCN.Run(N, XPH, YSTI, offset_ysti, ref K6, offset_k6, RPAR, offset_rpar, IPAR[1 + o_ipar]);
for (I = 1; I <= N; I++)
{
Y1[I + o_y1] = Y[I + o_y] + H * (A71 * K1[I + o_k1] + A73 * K3[I + o_k3] + A74 * K4[I + o_k4] + A75 * K5[I + o_k5] + A76 * K6[I + o_k6]);
}
FCN.Run(N, XPH, Y1, offset_y1, ref K2, offset_k2, RPAR, offset_rpar, IPAR[1 + o_ipar]);
if (IOUT >= 2)
{
for (J = 1; J <= NRD; J++)
{
I = ICOMP[J + o_icomp];
CONT[4 * NRD + J + o_cont] = H * (D1 * K1[I + o_k1] + D3 * K3[I + o_k3] + D4 * K4[I + o_k4] + D5 * K5[I + o_k5] + D6 * K6[I + o_k6] + D7 * K2[I + o_k2]);
}
}
for (I = 1; I <= N; I++)
{
K4[I + o_k4] = (E1 * K1[I + o_k1] + E3 * K3[I + o_k3] + E4 * K4[I + o_k4] + E5 * K5[I + o_k5] + E6 * K6[I + o_k6] + E7 * K2[I + o_k2]) * H;
}
NFCN += 6;
// C --- ERROR ESTIMATION
ERR = 0.0E0;
if (ITOL == 0)
{
for (I = 1; I <= N; I++)
{
SK = ATOLI + RTOLI * Math.Max(Math.Abs(Y[I + o_y]), Math.Abs(Y1[I + o_y1]));
ERR += Math.Pow(K4[I + o_k4] / SK, 2);
}
}
else
{
for (I = 1; I <= N; I++)
{
SK = ATOL[I + o_atol] + RTOL[I + o_rtol] * Math.Max(Math.Abs(Y[I + o_y]), Math.Abs(Y1[I + o_y1]));
ERR += Math.Pow(K4[I + o_k4] / SK, 2);
}
}
ERR = Math.Sqrt(ERR / N);
// C --- COMPUTATION OF HNEW
FAC11 = Math.Pow(ERR, EXPO1);
// C --- LUND-STABILIZATION
FAC = FAC11 / Math.Pow(FACOLD, BETA);
// C --- WE REQUIRE FAC1 <= HNEW/H <= FAC2
FAC = Math.Max(FACC2, Math.Min(FACC1, FAC / SAFE));
HNEW = H / FAC;
if (ERR <= 1.0E0)
{
// C --- STEP IS ACCEPTED
FACOLD = Math.Max(ERR, 1.0E-4);
NACCPT += 1;
// C ------- STIFFNESS DETECTION
if (FortranLib.Mod(NACCPT, NSTIFF) == 0 || IASTI > 0)
{
STNUM = 0.0E0;
STDEN = 0.0E0;
for (I = 1; I <= N; I++)
{
STNUM += Math.Pow(K2[I + o_k2] - K6[I + o_k6], 2);
STDEN += Math.Pow(Y1[I + o_y1] - YSTI[I + o_ysti], 2);
}
if (STDEN > 0.0E0)
{
HLAMB = H * Math.Sqrt(STNUM / STDEN);
}
if (HLAMB > 3.25E0)
{
NONSTI = 0;
IASTI += 1;
if (IASTI == 15)
{
if (IPRINT > 0)
{
; //ERROR-ERRORWRITE(IPRINT,*)' THE PROBLEM SEEMS TO BECOME STIFF AT X = ',X
}
if (IPRINT <= 0)
{
goto LABEL76;
}
}
}
else
{
NONSTI += 1;
if (NONSTI == 6)
{
IASTI = 0;
}
}
}
if (IOUT >= 2)
{
for (J = 1; J <= NRD; J++)
{
I = ICOMP[J + o_icomp];
YD0 = Y[I + o_y];
YDIFF = Y1[I + o_y1] - YD0;
BSPL = H * K1[I + o_k1] - YDIFF;
CONT[J + o_cont] = Y[I + o_y];
CONT[NRD + J + o_cont] = YDIFF;
CONT[2 * NRD + J + o_cont] = BSPL;
CONT[3 * NRD + J + o_cont] = -H * K2[I + o_k2] + YDIFF - BSPL;
}
}
for (I = 1; I <= N; I++)
{
K1[I + o_k1] = K2[I + o_k2];
Y[I + o_y] = Y1[I + o_y1];
}
XOLD.v = X;
X = XPH;
if (IOUT != 0)
{
HOUT.v = H;
SOLOUT.Run(NACCPT + 1, XOLD.v, X, Y, offset_y, N, CONT, offset_cont
, ICOMP, offset_icomp, NRD, RPAR, offset_rpar, IPAR[1 + o_ipar], IRTRN);
if (IRTRN < 0)
{
goto LABEL79;
}
}
// C ------- NORMAL EXIT
if (LAST)
{
H = HNEW;
IDID = 1;
return;
}
if (Math.Abs(HNEW) > HMAX)
{
HNEW = POSNEG * HMAX;
}
if (REJECT)
{
HNEW = POSNEG * Math.Min(Math.Abs(HNEW), Math.Abs(H));
}
REJECT = false;
}
else
{
// C --- STEP IS REJECTED
HNEW = H / Math.Min(FACC1, FAC11 / SAFE);
REJECT = true;
if (NACCPT >= 1)
{
NREJCT += 1;
}
LAST = false;
}
H = HNEW;
goto LABEL1;
// C --- FAIL EXIT
LABEL76 :;
IDID = -4;
return;
LABEL77 :;
if (IPRINT > 0)
{
; //ERROR-ERRORWRITE(IPRINT,979)X
}
if (IPRINT > 0)
{
; //ERROR-ERRORWRITE(IPRINT,*)' STEP SIZE T0O SMALL, H=',H
}
IDID = -3;
return;
LABEL78 :;
if (IPRINT > 0)
{
; //ERROR-ERRORWRITE(IPRINT,979)X
}
if (IPRINT > 0)
{
; //ERROR-ERRORWRITE(IPRINT,*)' MORE THAN NMAX =',NMAX,'STEPS ARE NEEDED'
}
IDID = -2;
return;
LABEL79 :;
if (IPRINT > 0)
{
; //ERROR-ERRORWRITE(IPRINT,979)X
}
IDID = 2;
return;
#endregion
}
/// <param name="N">
/// DIMENSION OF THE SYSTEM
///</param>
/// <param name="FCN">
/// NAME (EXTERNAL) OF SUBROUTINE COMPUTING THE
/// VALUE OF F(X,Y):
/// SUBROUTINE FCN(N,X,Y,F,RPAR,IPAR)
/// DOUBLE PRECISION X,Y(N),F(N)
/// F(1)=... ETC.
///</param>
/// <param name="X">
/// INITIAL X-VALUE
///</param>
/// <param name="XEND">
/// FINAL X-VALUE (XEND-X MAY BE POSITIVE OR NEGATIVE)
///</param>
/// <param name="ITOL">
/// SWITCH FOR RTOL AND ATOL:
/// ITOL=0: BOTH RTOL AND ATOL ARE SCALARS.
/// THE CODE KEEPS, ROUGHLY, THE LOCAL ERROR OF
/// Y(I) BELOW RTOL*ABS(Y(I))+ATOL
/// ITOL=1: BOTH RTOL AND ATOL ARE VECTORS.
/// THE CODE KEEPS THE LOCAL ERROR OF Y(I) BELOW
/// RTOL(I)*ABS(Y(I))+ATOL(I).
///</param>
/// <param name="SOLOUT">
/// NAME (EXTERNAL) OF SUBROUTINE PROVIDING THE
/// NUMERICAL SOLUTION DURING INTEGRATION.
/// IF IOUT.GE.1, IT IS CALLED AFTER EVERY SUCCESSFUL STEP.
/// SUPPLY A DUMMY SUBROUTINE IF IOUT=0.
/// IT MUST HAVE THE FORM
/// SUBROUTINE SOLOUT (NR,XOLD,X,Y,N,CON,ICOMP,ND,
/// RPAR,IPAR,IRTRN)
/// DIMENSION Y(N),CON(5*ND),ICOMP(ND)
/// ....
/// SOLOUT FURNISHES THE SOLUTION "Y" AT THE NR-TH
/// GRID-POINT "X" (THEREBY THE INITIAL VALUE IS
/// THE FIRST GRID-POINT).
/// "XOLD" IS THE PRECEEDING GRID-POINT.
/// "IRTRN" SERVES TO INTERRUPT THE INTEGRATION. IF IRTRN
/// IS SET .LT.0, DOPRI5 WILL RETURN TO THE CALLING PROGRAM.
/// IF THE NUMERICAL SOLUTION IS ALTERED IN SOLOUT,
/// SET IRTRN = 2
///
/// ----- CONTINUOUS OUTPUT: -----
/// DURING CALLS TO "SOLOUT", A CONTINUOUS SOLUTION
/// FOR THE INTERVAL [XOLD,X] IS AVAILABLE THROUGH
/// THE FUNCTION
/// .GT..GT..GT. CONTD5(I,S,CON,ICOMP,ND) .LT..LT..LT.
/// WHICH PROVIDES AN APPROXIMATION TO THE I-TH
/// COMPONENT OF THE SOLUTION AT THE POINT S. THE VALUE
/// S SHOULD LIE IN THE INTERVAL [XOLD,X].
///</param>
/// <param name="IOUT">
/// SWITCH FOR CALLING THE SUBROUTINE SOLOUT:
/// IOUT=0: SUBROUTINE IS NEVER CALLED
/// IOUT=1: SUBROUTINE IS USED FOR OUTPUT.
/// IOUT=2: DENSE OUTPUT IS PERFORMED IN SOLOUT
/// (IN THIS CASE WORK(5) MUST BE SPECIFIED)
///</param>
/// <param name="WORK">
/// ARRAY OF WORKING SPACE OF LENGTH "LWORK".
/// WORK(1),...,WORK(20) SERVE AS PARAMETERS FOR THE CODE.
/// FOR STANDARD USE, SET THEM TO ZERO BEFORE CALLING.
/// "LWORK" MUST BE AT LEAST 8*N+5*NRDENS+21
/// WHERE NRDENS = IWORK(5)
///</param>
/// <param name="LWORK">
/// DECLARED LENGHT OF ARRAY "WORK".
///</param>
/// <param name="IWORK">
/// INTEGER WORKING SPACE OF LENGHT "LIWORK".
/// IWORK(1),...,IWORK(20) SERVE AS PARAMETERS FOR THE CODE.
/// FOR STANDARD USE, SET THEM TO ZERO BEFORE CALLING.
/// "LIWORK" MUST BE AT LEAST NRDENS+21 .
///</param>
/// <param name="LIWORK">
/// DECLARED LENGHT OF ARRAY "IWORK".
///</param>
/// <param name="IDID">
/// REPORTS ON SUCCESSFULNESS UPON RETURN:
/// IDID= 1 COMPUTATION SUCCESSFUL,
/// IDID= 2 COMPUT. SUCCESSFUL (INTERRUPTED BY SOLOUT)
/// IDID=-1 INPUT IS NOT CONSISTENT,
/// IDID=-2 LARGER NMAX IS NEEDED,
/// IDID=-3 STEP SIZE BECOMES TOO SMALL.
/// IDID=-4 PROBLEM IS PROBABLY STIFF (INTERRUPTED).
///</param>
public void Run(int N, IFAREN FCN, ref double X, ref double[] Y, int offset_y, double XEND, double[] RTOL, int offset_rtol
, double[] ATOL, int offset_atol, int ITOL, ISOLOUT SOLOUT, int IOUT, ref double[] WORK, int offset_work, int LWORK
, ref int[] IWORK, int offset_iwork, int LIWORK, double[] RPAR, int offset_rpar, int[] IPAR, int offset_ipar, ref int IDID)
{
#region Variables
bool ARRET = false;
#endregion Variables
#region Implicit Variables
int NFCN = 0; int NSTEP = 0; int NACCPT = 0; int NREJCT = 0; int IPRINT = 0; int NMAX = 0; int METH = 0;
int NSTIFF = 0; int NRDENS = 0; int I = 0; double UROUND = 0; double SAFE = 0; double FAC1 = 0; double FAC2 = 0;
double BETA = 0; double HMAX = 0; double H = 0; int IEY1 = 0; int IEK1 = 0; int IEK2 = 0; int IEK3 = 0; int IEK4 = 0;
int IEK5 = 0; int IEK6 = 0; int IEYS = 0; int IECO = 0; int ISTORE = 0; int ICOMP = 0;
#endregion Implicit Variables
#region Array Index Correction
int o_y = -1 + offset_y; int o_rtol = -1 + offset_rtol; int o_atol = -1 + offset_atol;
int o_work = -1 + offset_work; int o_iwork = -1 + offset_iwork; int o_rpar = -1 + offset_rpar;
int o_ipar = -1 + offset_ipar;
#endregion Array Index Correction
#region Prolog
// C ----------------------------------------------------------
// C NUMERICAL SOLUTION OF A SYSTEM OF FIRST 0RDER
// C ORDINARY DIFFERENTIAL EQUATIONS Y'=F(X,Y).
// C THIS IS AN EXPLICIT RUNGE-KUTTA METHOD OF ORDER (4)5
// C DUE TO DORMAND & PRINCE (WITH STEPSIZE CONTROL AND
// C DENSE OUTPUT).
// C
// C AUTHORS: E. HAIRER AND G. WANNER
// C UNIVERSITE DE GENEVE, DEPT. DE MATHEMATIQUES
// C CH-1211 GENEVE 24, SWITZERLAND
// C E-MAIL: [email protected]
// C [email protected]
// C
// C THIS CODE IS DESCRIBED IN:
// C E. HAIRER, S.P. NORSETT AND G. WANNER, SOLVING ORDINARY
// C DIFFERENTIAL EQUATIONS I. NONSTIFF PROBLEMS. 2ND EDITION.
// C SPRINGER SERIES IN COMPUTATIONAL MATHEMATICS,
// C SPRINGER-VERLAG (1993)
// C
// C VERSION OF APRIL 25, 1996
// C (latest correction of a small bug: August 8, 2005)
// C
// C INPUT PARAMETERS
// C ----------------
// C N DIMENSION OF THE SYSTEM
// C
// C FCN NAME (EXTERNAL) OF SUBROUTINE COMPUTING THE
// C VALUE OF F(X,Y):
// C SUBROUTINE FCN(N,X,Y,F,RPAR,IPAR)
// C DOUBLE PRECISION X,Y(N),F(N)
// C F(1)=... ETC.
// C
// C X INITIAL X-VALUE
// C
// C Y(N) INITIAL VALUES FOR Y
// C
// C XEND FINAL X-VALUE (XEND-X MAY BE POSITIVE OR NEGATIVE)
// C
// C RTOL,ATOL RELATIVE AND ABSOLUTE ERROR TOLERANCES. THEY
// C CAN BE BOTH SCALARS OR ELSE BOTH VECTORS OF LENGTH N.
// C
// C ITOL SWITCH FOR RTOL AND ATOL:
// C ITOL=0: BOTH RTOL AND ATOL ARE SCALARS.
// C THE CODE KEEPS, ROUGHLY, THE LOCAL ERROR OF
// C Y(I) BELOW RTOL*ABS(Y(I))+ATOL
// C ITOL=1: BOTH RTOL AND ATOL ARE VECTORS.
// C THE CODE KEEPS THE LOCAL ERROR OF Y(I) BELOW
// C RTOL(I)*ABS(Y(I))+ATOL(I).
// C
// C SOLOUT NAME (EXTERNAL) OF SUBROUTINE PROVIDING THE
// C NUMERICAL SOLUTION DURING INTEGRATION.
// C IF IOUT.GE.1, IT IS CALLED AFTER EVERY SUCCESSFUL STEP.
// C SUPPLY A DUMMY SUBROUTINE IF IOUT=0.
// C IT MUST HAVE THE FORM
// C SUBROUTINE SOLOUT (NR,XOLD,X,Y,N,CON,ICOMP,ND,
// C RPAR,IPAR,IRTRN)
// C DIMENSION Y(N),CON(5*ND),ICOMP(ND)
// C ....
// C SOLOUT FURNISHES THE SOLUTION "Y" AT THE NR-TH
// C GRID-POINT "X" (THEREBY THE INITIAL VALUE IS
// C THE FIRST GRID-POINT).
// C "XOLD" IS THE PRECEEDING GRID-POINT.
// C "IRTRN" SERVES TO INTERRUPT THE INTEGRATION. IF IRTRN
// C IS SET <0, DOPRI5 WILL RETURN TO THE CALLING PROGRAM.
// C IF THE NUMERICAL SOLUTION IS ALTERED IN SOLOUT,
// C SET IRTRN = 2
// C
// C ----- CONTINUOUS OUTPUT: -----
// C DURING CALLS TO "SOLOUT", A CONTINUOUS SOLUTION
// C FOR THE INTERVAL [XOLD,X] IS AVAILABLE THROUGH
// C THE FUNCTION
// C >>> CONTD5(I,S,CON,ICOMP,ND) <<<
// C WHICH PROVIDES AN APPROXIMATION TO THE I-TH
// C COMPONENT OF THE SOLUTION AT THE POINT S. THE VALUE
// C S SHOULD LIE IN THE INTERVAL [XOLD,X].
// C
// C IOUT SWITCH FOR CALLING THE SUBROUTINE SOLOUT:
// C IOUT=0: SUBROUTINE IS NEVER CALLED
// C IOUT=1: SUBROUTINE IS USED FOR OUTPUT.
// C IOUT=2: DENSE OUTPUT IS PERFORMED IN SOLOUT
// C (IN THIS CASE WORK(5) MUST BE SPECIFIED)
// C
// C WORK ARRAY OF WORKING SPACE OF LENGTH "LWORK".
// C WORK(1),...,WORK(20) SERVE AS PARAMETERS FOR THE CODE.
// C FOR STANDARD USE, SET THEM TO ZERO BEFORE CALLING.
// C "LWORK" MUST BE AT LEAST 8*N+5*NRDENS+21
// C WHERE NRDENS = IWORK(5)
// C
// C LWORK DECLARED LENGHT OF ARRAY "WORK".
// C
// C IWORK INTEGER WORKING SPACE OF LENGHT "LIWORK".
// C IWORK(1),...,IWORK(20) SERVE AS PARAMETERS FOR THE CODE.
// C FOR STANDARD USE, SET THEM TO ZERO BEFORE CALLING.
// C "LIWORK" MUST BE AT LEAST NRDENS+21 .
// C
// C LIWORK DECLARED LENGHT OF ARRAY "IWORK".
// C
// C RPAR, IPAR REAL AND INTEGER PARAMETERS (OR PARAMETER ARRAYS) WHICH
// C CAN BE USED FOR COMMUNICATION BETWEEN YOUR CALLING
// C PROGRAM AND THE FCN, JAC, MAS, SOLOUT SUBROUTINES.
// C
// C-----------------------------------------------------------------------
// C
// C SOPHISTICATED SETTING OF PARAMETERS
// C -----------------------------------
// C SEVERAL PARAMETERS (WORK(1),...,IWORK(1),...) ALLOW
// C TO ADAPT THE CODE TO THE PROBLEM AND TO THE NEEDS OF
// C THE USER. FOR ZERO INPUT, THE CODE CHOOSES DEFAULT VALUES.
// C
// C WORK(1) UROUND, THE ROUNDING UNIT, DEFAULT 2.3D-16.
// C
// C WORK(2) THE SAFETY FACTOR IN STEP SIZE PREDICTION,
// C DEFAULT 0.9D0.
// C
// C WORK(3), WORK(4) PARAMETERS FOR STEP SIZE SELECTION
// C THE NEW STEP SIZE IS CHOSEN SUBJECT TO THE RESTRICTION
// C WORK(3) <= HNEW/HOLD <= WORK(4)
// C DEFAULT VALUES: WORK(3)=0.2D0, WORK(4)=10.D0
// C
// C WORK(5) IS THE "BETA" FOR STABILIZED STEP SIZE CONTROL
// C (SEE SECTION IV.2). LARGER VALUES OF BETA ( <= 0.1 )
// C MAKE THE STEP SIZE CONTROL MORE STABLE. DOPRI5 NEEDS
// C A LARGER BETA THAN HIGHAM & HALL. NEGATIVE WORK(5)
// C PROVOKE BETA=0.
// C DEFAULT 0.04D0.
// C
// C WORK(6) MAXIMAL STEP SIZE, DEFAULT XEND-X.
// C
// C WORK(7) INITIAL STEP SIZE, FOR WORK(7)=0.D0 AN INITIAL GUESS
// C IS COMPUTED WITH HELP OF THE FUNCTION HINIT
// C
// C IWORK(1) THIS IS THE MAXIMAL NUMBER OF ALLOWED STEPS.
// C THE DEFAULT VALUE (FOR IWORK(1)=0) IS 100000.
// C
// C IWORK(2) SWITCH FOR THE CHOICE OF THE COEFFICIENTS
// C IF IWORK(2).EQ.1 METHOD DOPRI5 OF DORMAND AND PRINCE
// C (TABLE 5.2 OF SECTION II.5).
// C AT THE MOMENT THIS IS THE ONLY POSSIBLE CHOICE.
// C THE DEFAULT VALUE (FOR IWORK(2)=0) IS IWORK(2)=1.
// C
// C IWORK(3) SWITCH FOR PRINTING ERROR MESSAGES
// C IF IWORK(3).LT.0 NO MESSAGES ARE BEING PRINTED
// C IF IWORK(3).GT.0 MESSAGES ARE PRINTED WITH
// C WRITE (IWORK(3),*) ...
// C DEFAULT VALUE (FOR IWORK(3)=0) IS IWORK(3)=6
// C
// C IWORK(4) TEST FOR STIFFNESS IS ACTIVATED AFTER STEP NUMBER
// C J*IWORK(4) (J INTEGER), PROVIDED IWORK(4).GT.0.
// C FOR NEGATIVE IWORK(4) THE STIFFNESS TEST IS
// C NEVER ACTIVATED; DEFAULT VALUE IS IWORK(4)=1000
// C
// C IWORK(5) = NRDENS = NUMBER OF COMPONENTS, FOR WHICH DENSE OUTPUT
// C IS REQUIRED; DEFAULT VALUE IS IWORK(5)=0;
// C FOR 0 < NRDENS < N THE COMPONENTS (FOR WHICH DENSE
// C OUTPUT IS REQUIRED) HAVE TO BE SPECIFIED IN
// C IWORK(21),...,IWORK(NRDENS+20);
// C FOR NRDENS=N THIS IS DONE BY THE CODE.
// C
// C----------------------------------------------------------------------
// C
// C OUTPUT PARAMETERS
// C -----------------
// C X X-VALUE FOR WHICH THE SOLUTION HAS BEEN COMPUTED
// C (AFTER SUCCESSFUL RETURN X=XEND).
// C
// C Y(N) NUMERICAL SOLUTION AT X
// C
// C H PREDICTED STEP SIZE OF THE LAST ACCEPTED STEP
// C
// C IDID REPORTS ON SUCCESSFULNESS UPON RETURN:
// C IDID= 1 COMPUTATION SUCCESSFUL,
// C IDID= 2 COMPUT. SUCCESSFUL (INTERRUPTED BY SOLOUT)
// C IDID=-1 INPUT IS NOT CONSISTENT,
// C IDID=-2 LARGER NMAX IS NEEDED,
// C IDID=-3 STEP SIZE BECOMES TOO SMALL.
// C IDID=-4 PROBLEM IS PROBABLY STIFF (INTERRUPTED).
// C
// C IWORK(17) NFCN NUMBER OF FUNCTION EVALUATIONS
// C IWORK(18) NSTEP NUMBER OF COMPUTED STEPS
// C IWORK(19) NACCPT NUMBER OF ACCEPTED STEPS
// C IWORK(20) NREJCT NUMBER OF REJECTED STEPS (DUE TO ERROR TEST),
// C (STEP REJECTIONS IN THE FIRST STEP ARE NOT COUNTED)
// C-----------------------------------------------------------------------
// C *** *** *** *** *** *** *** *** *** *** *** *** ***
// C DECLARATIONS
// C *** *** *** *** *** *** *** *** *** *** *** *** ***
// C *** *** *** *** *** *** ***
// C SETTING THE PARAMETERS
// C *** *** *** *** *** *** ***
#endregion Prolog
#region Body
NFCN = 0;
NSTEP = 0;
NACCPT = 0;
NREJCT = 0;
ARRET = false;
// C -------- IPRINT FOR MONITORING THE PRINTING
if (IWORK[3 + o_iwork] == 0)
{
IPRINT = 6;
}
else
{
IPRINT = IWORK[3 + o_iwork];
}
// C -------- NMAX , THE MAXIMAL NUMBER OF STEPS -----
if (IWORK[1 + o_iwork] == 0)
{
NMAX = 100000;
}
else
{
NMAX = IWORK[1 + o_iwork];
if (NMAX <= 0)
{
if (IPRINT > 0) ;//ERROR-ERRORWRITE(IPRINT,*)' WRONG INPUT IWORK(1)=',IWORK(1)
ARRET = true;
}
}
// C -------- METH COEFFICIENTS OF THE METHOD
if (IWORK[2 + o_iwork] == 0)
{
METH = 1;
}
else
{
METH = IWORK[2 + o_iwork];
if (METH <= 0 || METH >= 4)
{
if (IPRINT > 0) ;//ERROR-ERRORWRITE(IPRINT,*)' CURIOUS INPUT IWORK(2)=',IWORK(2)
ARRET = true;
}
}
// C -------- NSTIFF PARAMETER FOR STIFFNESS DETECTION
NSTIFF = IWORK[4 + o_iwork];
if (NSTIFF == 0) NSTIFF = 1000;
if (NSTIFF < 0) NSTIFF = NMAX + 10;
// C -------- NRDENS NUMBER OF DENSE OUTPUT COMPONENTS
NRDENS = IWORK[5 + o_iwork];
if (NRDENS < 0 || NRDENS > N)
{
if (IPRINT > 0) ;//ERROR-ERRORWRITE(IPRINT,*)' CURIOUS INPUT IWORK(5)=',IWORK(5)
ARRET = true;
}
else
{
if (NRDENS > 0 && IOUT < 2)
{
if (IPRINT > 0) ;//ERROR-ERRORWRITE(IPRINT,*)' WARNING: PUT IOUT=2 FOR DENSE OUTPUT '
}
if (NRDENS == N)
{
for (I = 1; I <= NRDENS; I++)
{
IWORK[20 + I + o_iwork] = I;
}
}
}
// C -------- UROUND SMALLEST NUMBER SATISFYING 1.D0+UROUND>1.D0
if (WORK[1 + o_work] == 0.0E0)
{
UROUND = 2.3E-16;
}
else
{
UROUND = WORK[1 + o_work];
if (UROUND <= 1.0E-35 || UROUND >= 1.0E0)
{
if (IPRINT > 0) ;//ERROR-ERRORWRITE(IPRINT,*)' WHICH MACHINE DO YOU HAVE? YOUR UROUND WAS:',WORK(1)
ARRET = true;
}
}
// C ------- SAFETY FACTOR -------------
if (WORK[2 + o_work] == 0.0E0)
{
SAFE = 0.9E0;
}
else
{
SAFE = WORK[2 + o_work];
if (SAFE >= 1.0E0 || SAFE <= 1.0E-4)
{
if (IPRINT > 0) ;//ERROR-ERRORWRITE(IPRINT,*)' CURIOUS INPUT FOR SAFETY FACTOR WORK(2)=',WORK(2)
ARRET = true;
}
}
// C ------- FAC1,FAC2 PARAMETERS FOR STEP SIZE SELECTION
if (WORK[3 + o_work] == 0.0E0)
{
FAC1 = 0.2E0;
}
else
{
FAC1 = WORK[3 + o_work];
}
if (WORK[4 + o_work] == 0.0E0)
{
FAC2 = 10.0E0;
}
else
{
FAC2 = WORK[4 + o_work];
}
// C --------- BETA FOR STEP CONTROL STABILIZATION -----------
if (WORK[5 + o_work] == 0.0E0)
{
BETA = 0.04E0;
}
else
{
if (WORK[5 + o_work] < 0.0E0)
{
BETA = 0.0E0;
}
else
{
BETA = WORK[5 + o_work];
if (BETA > 0.2E0)
{
if (IPRINT > 0) ;//ERROR-ERRORWRITE(IPRINT,*)' CURIOUS INPUT FOR BETA: WORK(5)=',WORK(5)
ARRET = true;
}
}
}
// C -------- MAXIMAL STEP SIZE
if (WORK[6 + o_work] == 0.0E0)
{
HMAX = XEND - X;
}
else
{
HMAX = WORK[6 + o_work];
}
// C -------- INITIAL STEP SIZE
H = WORK[7 + o_work];
// C ------- PREPARE THE ENTRY-POINTS FOR THE ARRAYS IN WORK -----
IEY1 = 21;
IEK1 = IEY1 + N;
IEK2 = IEK1 + N;
IEK3 = IEK2 + N;
IEK4 = IEK3 + N;
IEK5 = IEK4 + N;
IEK6 = IEK5 + N;
IEYS = IEK6 + N;
IECO = IEYS + N;
// C ------ TOTAL STORAGE REQUIREMENT -----------
ISTORE = IEYS + 5 * NRDENS - 1;
if (ISTORE > LWORK)
{
if (IPRINT > 0) ;//ERROR-ERRORWRITE(IPRINT,*)' INSUFFICIENT STORAGE FOR WORK, MIN. LWORK=',ISTORE
ARRET = true;
}
ICOMP = 21;
ISTORE = ICOMP + NRDENS - 1;
if (ISTORE > LIWORK)
{
if (IPRINT > 0) ;//ERROR-ERRORWRITE(IPRINT,*)' INSUFFICIENT STORAGE FOR IWORK, MIN. LIWORK=',ISTORE
ARRET = true;
}
// C ------ WHEN A FAIL HAS OCCURED, WE RETURN WITH IDID=-1
if (ARRET)
{
IDID = -1;
return;
}
// C -------- CALL TO CORE INTEGRATOR ------------
this._dopcor.Run(N, FCN, ref X, ref Y, offset_y, XEND, ref HMAX
, ref H, RTOL, offset_rtol, ATOL, offset_atol, ITOL, IPRINT, SOLOUT
, IOUT, ref IDID, NMAX, UROUND, METH, NSTIFF
, SAFE, BETA, FAC1, FAC2, ref WORK, IEY1 + o_work, ref WORK, IEK1 + o_work
, ref WORK, IEK2 + o_work, ref WORK, IEK3 + o_work, ref WORK, IEK4 + o_work, ref WORK, IEK5 + o_work, ref WORK, IEK6 + o_work, ref WORK, IEYS + o_work
, ref WORK, IECO + o_work, IWORK, ICOMP + o_iwork, NRDENS, RPAR, offset_rpar, IPAR, offset_ipar, ref NFCN
, ref NSTEP, ref NACCPT, ref NREJCT);
WORK[7 + o_work] = H;
IWORK[17 + o_iwork] = NFCN;
IWORK[18 + o_iwork] = NSTEP;
IWORK[19 + o_iwork] = NACCPT;
IWORK[20 + o_iwork] = NREJCT;
// C ----------- RETURN -----------
return;
#endregion Body
}
/// <param name="N">
/// DIMENSION OF THE SYSTEM
///</param>
/// <param name="FCN">
/// NAME (EXTERNAL) OF SUBROUTINE COMPUTING THE
/// VALUE OF F(X,Y):
/// SUBROUTINE FCN(N,X,Y,F,RPAR,IPAR)
/// DOUBLE PRECISION X,Y(N),F(N)
/// F(1)=... ETC.
///</param>
/// <param name="X">
/// INITIAL X-VALUE
///</param>
/// <param name="XEND">
/// FINAL X-VALUE (XEND-X MAY BE POSITIVE OR NEGATIVE)
///</param>
/// <param name="ITOL">
/// SWITCH FOR RTOL AND ATOL:
/// ITOL=0: BOTH RTOL AND ATOL ARE SCALARS.
/// THE CODE KEEPS, ROUGHLY, THE LOCAL ERROR OF
/// Y(I) BELOW RTOL*ABS(Y(I))+ATOL
/// ITOL=1: BOTH RTOL AND ATOL ARE VECTORS.
/// THE CODE KEEPS THE LOCAL ERROR OF Y(I) BELOW
/// RTOL(I)*ABS(Y(I))+ATOL(I).
///</param>
/// <param name="SOLOUT">
/// NAME (EXTERNAL) OF SUBROUTINE PROVIDING THE
/// NUMERICAL SOLUTION DURING INTEGRATION.
/// IF IOUT.GE.1, IT IS CALLED AFTER EVERY SUCCESSFUL STEP.
/// SUPPLY A DUMMY SUBROUTINE IF IOUT=0.
/// IT MUST HAVE THE FORM
/// SUBROUTINE SOLOUT (NR,XOLD,X,Y,N,CON,ICOMP,ND,
/// RPAR,IPAR,IRTRN)
/// DIMENSION Y(N),CON(5*ND),ICOMP(ND)
/// ....
/// SOLOUT FURNISHES THE SOLUTION "Y" AT THE NR-TH
/// GRID-POINT "X" (THEREBY THE INITIAL VALUE IS
/// THE FIRST GRID-POINT).
/// "XOLD" IS THE PRECEEDING GRID-POINT.
/// "IRTRN" SERVES TO INTERRUPT THE INTEGRATION. IF IRTRN
/// IS SET .LT.0, DOPRI5 WILL RETURN TO THE CALLING PROGRAM.
/// IF THE NUMERICAL SOLUTION IS ALTERED IN SOLOUT,
/// SET IRTRN = 2
///
/// ----- CONTINUOUS OUTPUT: -----
/// DURING CALLS TO "SOLOUT", A CONTINUOUS SOLUTION
/// FOR THE INTERVAL [XOLD,X] IS AVAILABLE THROUGH
/// THE FUNCTION
/// .GT..GT..GT. CONTD5(I,S,CON,ICOMP,ND) .LT..LT..LT.
/// WHICH PROVIDES AN APPROXIMATION TO THE I-TH
/// COMPONENT OF THE SOLUTION AT THE POINT S. THE VALUE
/// S SHOULD LIE IN THE INTERVAL [XOLD,X].
///</param>
/// <param name="IOUT">
/// SWITCH FOR CALLING THE SUBROUTINE SOLOUT:
/// IOUT=0: SUBROUTINE IS NEVER CALLED
/// IOUT=1: SUBROUTINE IS USED FOR OUTPUT.
/// IOUT=2: DENSE OUTPUT IS PERFORMED IN SOLOUT
/// (IN THIS CASE WORK(5) MUST BE SPECIFIED)
///</param>
/// <param name="WORK">
/// ARRAY OF WORKING SPACE OF LENGTH "LWORK".
/// WORK(1),...,WORK(20) SERVE AS PARAMETERS FOR THE CODE.
/// FOR STANDARD USE, SET THEM TO ZERO BEFORE CALLING.
/// "LWORK" MUST BE AT LEAST 8*N+5*NRDENS+21
/// WHERE NRDENS = IWORK(5)
///</param>
/// <param name="LWORK">
/// DECLARED LENGHT OF ARRAY "WORK".
///</param>
/// <param name="IWORK">
/// INTEGER WORKING SPACE OF LENGHT "LIWORK".
/// IWORK(1),...,IWORK(20) SERVE AS PARAMETERS FOR THE CODE.
/// FOR STANDARD USE, SET THEM TO ZERO BEFORE CALLING.
/// "LIWORK" MUST BE AT LEAST NRDENS+21 .
///</param>
/// <param name="LIWORK">
/// DECLARED LENGHT OF ARRAY "IWORK".
///</param>
/// <param name="IDID">
/// REPORTS ON SUCCESSFULNESS UPON RETURN:
/// IDID= 1 COMPUTATION SUCCESSFUL,
/// IDID= 2 COMPUT. SUCCESSFUL (INTERRUPTED BY SOLOUT)
/// IDID=-1 INPUT IS NOT CONSISTENT,
/// IDID=-2 LARGER NMAX IS NEEDED,
/// IDID=-3 STEP SIZE BECOMES TOO SMALL.
/// IDID=-4 PROBLEM IS PROBABLY STIFF (INTERRUPTED).
///</param>
public void Run(int N, IFAREN FCN, ref double X, ref double[] Y, int offset_y, double XEND, double[] RTOL, int offset_rtol
, double[] ATOL, int offset_atol, int ITOL, ISOLOUT SOLOUT, int IOUT, ref double[] WORK, int offset_work, int LWORK
, ref int[] IWORK, int offset_iwork, int LIWORK, double[] RPAR, int offset_rpar, int[] IPAR, int offset_ipar, ref int IDID)
{
#region Variables
bool ARRET = false;
#endregion
#region Implicit Variables
int NFCN = 0; int NSTEP = 0; int NACCPT = 0; int NREJCT = 0; int IPRINT = 0; int NMAX = 0; int METH = 0;
int NSTIFF = 0; int NRDENS = 0; int I = 0; double UROUND = 0; double SAFE = 0; double FAC1 = 0; double FAC2 = 0;
double BETA = 0; double HMAX = 0; double H = 0; int IEY1 = 0; int IEK1 = 0; int IEK2 = 0; int IEK3 = 0; int IEK4 = 0;
int IEK5 = 0; int IEK6 = 0; int IEYS = 0; int IECO = 0; int ISTORE = 0; int ICOMP = 0;
#endregion
#region Array Index Correction
int o_y = -1 + offset_y; int o_rtol = -1 + offset_rtol; int o_atol = -1 + offset_atol;
int o_work = -1 + offset_work; int o_iwork = -1 + offset_iwork; int o_rpar = -1 + offset_rpar;
int o_ipar = -1 + offset_ipar;
#endregion
#region Prolog
// C ----------------------------------------------------------
// C NUMERICAL SOLUTION OF A SYSTEM OF FIRST 0RDER
// C ORDINARY DIFFERENTIAL EQUATIONS Y'=F(X,Y).
// C THIS IS AN EXPLICIT RUNGE-KUTTA METHOD OF ORDER (4)5
// C DUE TO DORMAND & PRINCE (WITH STEPSIZE CONTROL AND
// C DENSE OUTPUT).
// C
// C AUTHORS: E. HAIRER AND G. WANNER
// C UNIVERSITE DE GENEVE, DEPT. DE MATHEMATIQUES
// C CH-1211 GENEVE 24, SWITZERLAND
// C E-MAIL: [email protected]
// C [email protected]
// C
// C THIS CODE IS DESCRIBED IN:
// C E. HAIRER, S.P. NORSETT AND G. WANNER, SOLVING ORDINARY
// C DIFFERENTIAL EQUATIONS I. NONSTIFF PROBLEMS. 2ND EDITION.
// C SPRINGER SERIES IN COMPUTATIONAL MATHEMATICS,
// C SPRINGER-VERLAG (1993)
// C
// C VERSION OF APRIL 25, 1996
// C (latest correction of a small bug: August 8, 2005)
// C
// C INPUT PARAMETERS
// C ----------------
// C N DIMENSION OF THE SYSTEM
// C
// C FCN NAME (EXTERNAL) OF SUBROUTINE COMPUTING THE
// C VALUE OF F(X,Y):
// C SUBROUTINE FCN(N,X,Y,F,RPAR,IPAR)
// C DOUBLE PRECISION X,Y(N),F(N)
// C F(1)=... ETC.
// C
// C X INITIAL X-VALUE
// C
// C Y(N) INITIAL VALUES FOR Y
// C
// C XEND FINAL X-VALUE (XEND-X MAY BE POSITIVE OR NEGATIVE)
// C
// C RTOL,ATOL RELATIVE AND ABSOLUTE ERROR TOLERANCES. THEY
// C CAN BE BOTH SCALARS OR ELSE BOTH VECTORS OF LENGTH N.
// C
// C ITOL SWITCH FOR RTOL AND ATOL:
// C ITOL=0: BOTH RTOL AND ATOL ARE SCALARS.
// C THE CODE KEEPS, ROUGHLY, THE LOCAL ERROR OF
// C Y(I) BELOW RTOL*ABS(Y(I))+ATOL
// C ITOL=1: BOTH RTOL AND ATOL ARE VECTORS.
// C THE CODE KEEPS THE LOCAL ERROR OF Y(I) BELOW
// C RTOL(I)*ABS(Y(I))+ATOL(I).
// C
// C SOLOUT NAME (EXTERNAL) OF SUBROUTINE PROVIDING THE
// C NUMERICAL SOLUTION DURING INTEGRATION.
// C IF IOUT.GE.1, IT IS CALLED AFTER EVERY SUCCESSFUL STEP.
// C SUPPLY A DUMMY SUBROUTINE IF IOUT=0.
// C IT MUST HAVE THE FORM
// C SUBROUTINE SOLOUT (NR,XOLD,X,Y,N,CON,ICOMP,ND,
// C RPAR,IPAR,IRTRN)
// C DIMENSION Y(N),CON(5*ND),ICOMP(ND)
// C ....
// C SOLOUT FURNISHES THE SOLUTION "Y" AT THE NR-TH
// C GRID-POINT "X" (THEREBY THE INITIAL VALUE IS
// C THE FIRST GRID-POINT).
// C "XOLD" IS THE PRECEEDING GRID-POINT.
// C "IRTRN" SERVES TO INTERRUPT THE INTEGRATION. IF IRTRN
// C IS SET <0, DOPRI5 WILL RETURN TO THE CALLING PROGRAM.
// C IF THE NUMERICAL SOLUTION IS ALTERED IN SOLOUT,
// C SET IRTRN = 2
// C
// C ----- CONTINUOUS OUTPUT: -----
// C DURING CALLS TO "SOLOUT", A CONTINUOUS SOLUTION
// C FOR THE INTERVAL [XOLD,X] IS AVAILABLE THROUGH
// C THE FUNCTION
// C >>> CONTD5(I,S,CON,ICOMP,ND) <<<
// C WHICH PROVIDES AN APPROXIMATION TO THE I-TH
// C COMPONENT OF THE SOLUTION AT THE POINT S. THE VALUE
// C S SHOULD LIE IN THE INTERVAL [XOLD,X].
// C
// C IOUT SWITCH FOR CALLING THE SUBROUTINE SOLOUT:
// C IOUT=0: SUBROUTINE IS NEVER CALLED
// C IOUT=1: SUBROUTINE IS USED FOR OUTPUT.
// C IOUT=2: DENSE OUTPUT IS PERFORMED IN SOLOUT
// C (IN THIS CASE WORK(5) MUST BE SPECIFIED)
// C
// C WORK ARRAY OF WORKING SPACE OF LENGTH "LWORK".
// C WORK(1),...,WORK(20) SERVE AS PARAMETERS FOR THE CODE.
// C FOR STANDARD USE, SET THEM TO ZERO BEFORE CALLING.
// C "LWORK" MUST BE AT LEAST 8*N+5*NRDENS+21
// C WHERE NRDENS = IWORK(5)
// C
// C LWORK DECLARED LENGHT OF ARRAY "WORK".
// C
// C IWORK INTEGER WORKING SPACE OF LENGHT "LIWORK".
// C IWORK(1),...,IWORK(20) SERVE AS PARAMETERS FOR THE CODE.
// C FOR STANDARD USE, SET THEM TO ZERO BEFORE CALLING.
// C "LIWORK" MUST BE AT LEAST NRDENS+21 .
// C
// C LIWORK DECLARED LENGHT OF ARRAY "IWORK".
// C
// C RPAR, IPAR REAL AND INTEGER PARAMETERS (OR PARAMETER ARRAYS) WHICH
// C CAN BE USED FOR COMMUNICATION BETWEEN YOUR CALLING
// C PROGRAM AND THE FCN, JAC, MAS, SOLOUT SUBROUTINES.
// C
// C-----------------------------------------------------------------------
// C
// C SOPHISTICATED SETTING OF PARAMETERS
// C -----------------------------------
// C SEVERAL PARAMETERS (WORK(1),...,IWORK(1),...) ALLOW
// C TO ADAPT THE CODE TO THE PROBLEM AND TO THE NEEDS OF
// C THE USER. FOR ZERO INPUT, THE CODE CHOOSES DEFAULT VALUES.
// C
// C WORK(1) UROUND, THE ROUNDING UNIT, DEFAULT 2.3D-16.
// C
// C WORK(2) THE SAFETY FACTOR IN STEP SIZE PREDICTION,
// C DEFAULT 0.9D0.
// C
// C WORK(3), WORK(4) PARAMETERS FOR STEP SIZE SELECTION
// C THE NEW STEP SIZE IS CHOSEN SUBJECT TO THE RESTRICTION
// C WORK(3) <= HNEW/HOLD <= WORK(4)
// C DEFAULT VALUES: WORK(3)=0.2D0, WORK(4)=10.D0
// C
// C WORK(5) IS THE "BETA" FOR STABILIZED STEP SIZE CONTROL
// C (SEE SECTION IV.2). LARGER VALUES OF BETA ( <= 0.1 )
// C MAKE THE STEP SIZE CONTROL MORE STABLE. DOPRI5 NEEDS
// C A LARGER BETA THAN HIGHAM & HALL. NEGATIVE WORK(5)
// C PROVOKE BETA=0.
// C DEFAULT 0.04D0.
// C
// C WORK(6) MAXIMAL STEP SIZE, DEFAULT XEND-X.
// C
// C WORK(7) INITIAL STEP SIZE, FOR WORK(7)=0.D0 AN INITIAL GUESS
// C IS COMPUTED WITH HELP OF THE FUNCTION HINIT
// C
// C IWORK(1) THIS IS THE MAXIMAL NUMBER OF ALLOWED STEPS.
// C THE DEFAULT VALUE (FOR IWORK(1)=0) IS 100000.
// C
// C IWORK(2) SWITCH FOR THE CHOICE OF THE COEFFICIENTS
// C IF IWORK(2).EQ.1 METHOD DOPRI5 OF DORMAND AND PRINCE
// C (TABLE 5.2 OF SECTION II.5).
// C AT THE MOMENT THIS IS THE ONLY POSSIBLE CHOICE.
// C THE DEFAULT VALUE (FOR IWORK(2)=0) IS IWORK(2)=1.
// C
// C IWORK(3) SWITCH FOR PRINTING ERROR MESSAGES
// C IF IWORK(3).LT.0 NO MESSAGES ARE BEING PRINTED
// C IF IWORK(3).GT.0 MESSAGES ARE PRINTED WITH
// C WRITE (IWORK(3),*) ...
// C DEFAULT VALUE (FOR IWORK(3)=0) IS IWORK(3)=6
// C
// C IWORK(4) TEST FOR STIFFNESS IS ACTIVATED AFTER STEP NUMBER
// C J*IWORK(4) (J INTEGER), PROVIDED IWORK(4).GT.0.
// C FOR NEGATIVE IWORK(4) THE STIFFNESS TEST IS
// C NEVER ACTIVATED; DEFAULT VALUE IS IWORK(4)=1000
// C
// C IWORK(5) = NRDENS = NUMBER OF COMPONENTS, FOR WHICH DENSE OUTPUT
// C IS REQUIRED; DEFAULT VALUE IS IWORK(5)=0;
// C FOR 0 < NRDENS < N THE COMPONENTS (FOR WHICH DENSE
// C OUTPUT IS REQUIRED) HAVE TO BE SPECIFIED IN
// C IWORK(21),...,IWORK(NRDENS+20);
// C FOR NRDENS=N THIS IS DONE BY THE CODE.
// C
// C----------------------------------------------------------------------
// C
// C OUTPUT PARAMETERS
// C -----------------
// C X X-VALUE FOR WHICH THE SOLUTION HAS BEEN COMPUTED
// C (AFTER SUCCESSFUL RETURN X=XEND).
// C
// C Y(N) NUMERICAL SOLUTION AT X
// C
// C H PREDICTED STEP SIZE OF THE LAST ACCEPTED STEP
// C
// C IDID REPORTS ON SUCCESSFULNESS UPON RETURN:
// C IDID= 1 COMPUTATION SUCCESSFUL,
// C IDID= 2 COMPUT. SUCCESSFUL (INTERRUPTED BY SOLOUT)
// C IDID=-1 INPUT IS NOT CONSISTENT,
// C IDID=-2 LARGER NMAX IS NEEDED,
// C IDID=-3 STEP SIZE BECOMES TOO SMALL.
// C IDID=-4 PROBLEM IS PROBABLY STIFF (INTERRUPTED).
// C
// C IWORK(17) NFCN NUMBER OF FUNCTION EVALUATIONS
// C IWORK(18) NSTEP NUMBER OF COMPUTED STEPS
// C IWORK(19) NACCPT NUMBER OF ACCEPTED STEPS
// C IWORK(20) NREJCT NUMBER OF REJECTED STEPS (DUE TO ERROR TEST),
// C (STEP REJECTIONS IN THE FIRST STEP ARE NOT COUNTED)
// C-----------------------------------------------------------------------
// C *** *** *** *** *** *** *** *** *** *** *** *** ***
// C DECLARATIONS
// C *** *** *** *** *** *** *** *** *** *** *** *** ***
// C *** *** *** *** *** *** ***
// C SETTING THE PARAMETERS
// C *** *** *** *** *** *** ***
#endregion
#region Body
NFCN = 0;
NSTEP = 0;
NACCPT = 0;
NREJCT = 0;
ARRET = false;
// C -------- IPRINT FOR MONITORING THE PRINTING
if (IWORK[3 + o_iwork] == 0)
{
IPRINT = 6;
}
else
{
IPRINT = IWORK[3 + o_iwork];
}
// C -------- NMAX , THE MAXIMAL NUMBER OF STEPS -----
if (IWORK[1 + o_iwork] == 0)
{
NMAX = 100000;
}
else
{
NMAX = IWORK[1 + o_iwork];
if (NMAX <= 0)
{
if (IPRINT > 0)
{
; //ERROR-ERRORWRITE(IPRINT,*)' WRONG INPUT IWORK(1)=',IWORK(1)
}
ARRET = true;
}
}
// C -------- METH COEFFICIENTS OF THE METHOD
if (IWORK[2 + o_iwork] == 0)
{
METH = 1;
}
else
{
METH = IWORK[2 + o_iwork];
if (METH <= 0 || METH >= 4)
{
if (IPRINT > 0)
{
; //ERROR-ERRORWRITE(IPRINT,*)' CURIOUS INPUT IWORK(2)=',IWORK(2)
}
ARRET = true;
}
}
// C -------- NSTIFF PARAMETER FOR STIFFNESS DETECTION
NSTIFF = IWORK[4 + o_iwork];
if (NSTIFF == 0)
{
NSTIFF = 1000;
}
if (NSTIFF < 0)
{
NSTIFF = NMAX + 10;
}
// C -------- NRDENS NUMBER OF DENSE OUTPUT COMPONENTS
NRDENS = IWORK[5 + o_iwork];
if (NRDENS < 0 || NRDENS > N)
{
if (IPRINT > 0)
{
; //ERROR-ERRORWRITE(IPRINT,*)' CURIOUS INPUT IWORK(5)=',IWORK(5)
}
ARRET = true;
}
else
{
if (NRDENS > 0 && IOUT < 2)
{
if (IPRINT > 0)
{
; //ERROR-ERRORWRITE(IPRINT,*)' WARNING: PUT IOUT=2 FOR DENSE OUTPUT '
}
}
if (NRDENS == N)
{
for (I = 1; I <= NRDENS; I++)
{
IWORK[20 + I + o_iwork] = I;
}
}
}
// C -------- UROUND SMALLEST NUMBER SATISFYING 1.D0+UROUND>1.D0
if (WORK[1 + o_work] == 0.0E0)
{
UROUND = 2.3E-16;
}
else
{
UROUND = WORK[1 + o_work];
if (UROUND <= 1.0E-35 || UROUND >= 1.0E0)
{
if (IPRINT > 0)
{
; //ERROR-ERRORWRITE(IPRINT,*)' WHICH MACHINE DO YOU HAVE? YOUR UROUND WAS:',WORK(1)
}
ARRET = true;
}
}
// C ------- SAFETY FACTOR -------------
if (WORK[2 + o_work] == 0.0E0)
{
SAFE = 0.9E0;
}
else
{
SAFE = WORK[2 + o_work];
if (SAFE >= 1.0E0 || SAFE <= 1.0E-4)
{
if (IPRINT > 0)
{
; //ERROR-ERRORWRITE(IPRINT,*)' CURIOUS INPUT FOR SAFETY FACTOR WORK(2)=',WORK(2)
}
ARRET = true;
}
}
// C ------- FAC1,FAC2 PARAMETERS FOR STEP SIZE SELECTION
if (WORK[3 + o_work] == 0.0E0)
{
FAC1 = 0.2E0;
}
else
{
FAC1 = WORK[3 + o_work];
}
if (WORK[4 + o_work] == 0.0E0)
{
FAC2 = 10.0E0;
}
else
{
FAC2 = WORK[4 + o_work];
}
// C --------- BETA FOR STEP CONTROL STABILIZATION -----------
if (WORK[5 + o_work] == 0.0E0)
{
BETA = 0.04E0;
}
else
{
if (WORK[5 + o_work] < 0.0E0)
{
BETA = 0.0E0;
}
else
{
BETA = WORK[5 + o_work];
if (BETA > 0.2E0)
{
if (IPRINT > 0)
{
; //ERROR-ERRORWRITE(IPRINT,*)' CURIOUS INPUT FOR BETA: WORK(5)=',WORK(5)
}
ARRET = true;
}
}
}
// C -------- MAXIMAL STEP SIZE
if (WORK[6 + o_work] == 0.0E0)
{
HMAX = XEND - X;
}
else
{
HMAX = WORK[6 + o_work];
}
// C -------- INITIAL STEP SIZE
H = WORK[7 + o_work];
// C ------- PREPARE THE ENTRY-POINTS FOR THE ARRAYS IN WORK -----
IEY1 = 21;
IEK1 = IEY1 + N;
IEK2 = IEK1 + N;
IEK3 = IEK2 + N;
IEK4 = IEK3 + N;
IEK5 = IEK4 + N;
IEK6 = IEK5 + N;
IEYS = IEK6 + N;
IECO = IEYS + N;
// C ------ TOTAL STORAGE REQUIREMENT -----------
ISTORE = IEYS + 5 * NRDENS - 1;
if (ISTORE > LWORK)
{
if (IPRINT > 0)
{
; //ERROR-ERRORWRITE(IPRINT,*)' INSUFFICIENT STORAGE FOR WORK, MIN. LWORK=',ISTORE
}
ARRET = true;
}
ICOMP = 21;
ISTORE = ICOMP + NRDENS - 1;
if (ISTORE > LIWORK)
{
if (IPRINT > 0)
{
; //ERROR-ERRORWRITE(IPRINT,*)' INSUFFICIENT STORAGE FOR IWORK, MIN. LIWORK=',ISTORE
}
ARRET = true;
}
// C ------ WHEN A FAIL HAS OCCURED, WE RETURN WITH IDID=-1
if (ARRET)
{
IDID = -1;
return;
}
// C -------- CALL TO CORE INTEGRATOR ------------
this._dopcor.Run(N, FCN, ref X, ref Y, offset_y, XEND, ref HMAX
, ref H, RTOL, offset_rtol, ATOL, offset_atol, ITOL, IPRINT, SOLOUT
, IOUT, ref IDID, NMAX, UROUND, METH, NSTIFF
, SAFE, BETA, FAC1, FAC2, ref WORK, IEY1 + o_work, ref WORK, IEK1 + o_work
, ref WORK, IEK2 + o_work, ref WORK, IEK3 + o_work, ref WORK, IEK4 + o_work, ref WORK, IEK5 + o_work, ref WORK, IEK6 + o_work, ref WORK, IEYS + o_work
, ref WORK, IECO + o_work, IWORK, ICOMP + o_iwork, NRDENS, RPAR, offset_rpar, IPAR, offset_ipar, ref NFCN
, ref NSTEP, ref NACCPT, ref NREJCT);
WORK[7 + o_work] = H;
IWORK[17 + o_iwork] = NFCN;
IWORK[18 + o_iwork] = NSTEP;
IWORK[19 + o_iwork] = NACCPT;
IWORK[20 + o_iwork] = NREJCT;
// C ----------- RETURN -----------
return;
#endregion
}